CONFERENCE PROGRAM

INTERNATIONAL CONFERENCE

ON MANUFACTURING SYSTEMS

ICMaS 2010

MACHINE TOOL

NATIONAL CONFERENCE the 19

th edition

1112 November, 2010

Bucharest, Romania

2

3

INTERNATIONAL PROGRAM COMMITTEE

Andronescu E., Romania Aurite Tr., Romania Bostan I., Rep. of Moldova Brun-Picard D., France Dumitrache I., Romania Gerard A., France Gyenge C., Romania Jedrzejewski J., Poland Ionescu Fl., Germany Ispas C., Romania

Katalinic B., Austria Kovacs F., Romania Legutko S., Poland Minciu C., Romania Oprean A., Romania Pay E., Romania Play D., France Strajescu E., Romania Tichkiewitch S., France Voinea R., Romania

ORGANIZING COMMITTEE

Chairman Eugen STRAJESCU

Catrina D.

Constantin G.

Cotet, C. E.

Croitoru, S.

Ghionea A.

Ispas C.

Mohora C.

Predincea N.

Prodan D.

Pupaza C.

Zapciu M.

4

INTERNATIONAL SCIENTIFIC COMMITTEE

Amarandei D., Romania Amza Gh., Romania Aurite Tr., Romania Antonescu P., Romania Atanasiu C., Romania Balc N., Romania Barre P. J., France Bogdan L., Romania Bolos V., Romania Bologa O., Romania Boncoi Gh., Romania Bondrea I., Romania Brabie Gh., Romania Brandasu D., Romania Bruno-Picard D., France Cahuc O., France Calefariu G., Romania Catana I., Romania Ciobanu M., Romania Constantin G., Romania Cozmanca M., Romania Craciunoiu S., Romania Craiu M., Romania Cotetiu R., Romania Ditu V., Romania Dobre G., Romania Doicin C., Romania Dorin Al., Romania Dumitru G., Romania Draghici G., Romania Fetecau C., Romania Fota A., Romania Frumusanu G., Romania Ganea I., Romania Gerard A., France Gheorghe M., Romania Gheorghiu H., Romania Ghionea, A., Romania Gornic C., Romania Grecu E., Canada Guran M., Romania Gyenge C., Romania Ionescu F., Germania Iliescu M., Romania Ionescu S., Romania Iliescu M., Romania Javgureanu V., Moldova Jinescu V., Romania Junkar M., Slovenia Kostadinov K., Bulgaria

Kruth J.P., Belgium Kuric I., Slovakia Legutko S., Poland Levy P., U.K Madl J., Czech Rep Marinescu N., Romania Martin P., France Masalar L., Belgium Mihailide M., Romania Mihailidis A., Greece Mikhailov O., Ukraine Minciu C., Romania Mitsi S., Greece Morar L., Romania Nasui V., Romania Nieszporek T., Poland Novak-Marcincin J., Slovakia Oancea N., Romania Paunoiu V., Romania Play D., France Prodan D., Romania Pastrama S.D., Romania Pandilov Z., Rep Macedonia Parausanu I., Romania Patko G., Hungary Petre M., Romania Plahteanu B., Romania Popescu I., Romania Popescu D., Romania Reynaerts D., Belgium Rigal J.-Fr., France Rydzkowski T., Poland Sandu I.Gh., Romania Sindila Gh., Romania Simionescu L., Romania Slatineanu L., Romania Staicu S., Romania Stanescu A., Romania Stancescu C., Romania Strajescu E., Romania Tanase I., Romania Tarcolea C., Romania Ungureanu N., Romania Vasile N., Romania Vladareanu L., Romania Vlase A., Romania Zetu D., Romania Zapciu M., Romania

5

CONFERENCE PROGRAM

Thursday, November 11th

, 2010

08:30 – 09:00 Registration Lounge CD

09:00 – 09:30 Opening ceremony Amphitheatre CD 008

09:30 – 11:30 Plenary session

Sponsors’ presentation

11:30 – 12:00 Coffee break

12:00 – 14:30 Plenary session

14:45 – 18:15 Proceedings on sections Rooms: CD 008, CB 109,

CB 110, CK 110

18:30 – 22:30 Festive dinner

Friday, November 12th

, 2010

09:00 – 11:30 Scientific seminar Amphitheatre CD 008

Approaching academia and industry by implementing

the concept of technology transfer.

With the participation of:

- Honeywell Garret Romania, ing. Ovidiu MAZILU

- Jozef NOVAK-MARCINCIN, Application of virtual manufacturing in

industrial practice

- Tadeusz NIESZPOREK, Kazimierz ŁYCZKO, Generation of the worm

helical surface

- Radu CANARACHE, Paul ROSU, Lucian GRUIONU, CAM software for 5

axis machine-tools

11:30 – 12:30 Closing ceremony Amphitheatre CD 008

12:30 – 13:00

Coffee break

12:30 – 14:30

Visit

6

CONFERENCE SECTIONS

• Plenary section

Section S1: • Machine tools

Section S2: • Industrial Robots

Section S3: • Machines and equipments

Section S4: • Driving systems and control systems

Section S5: • Cutting and cutting tools

Section S6: • Advanced manufacturing technologies

Section S7: • Approach on CAD, CAM, CAE techniques

Section S8: • Industrial management and marketing

7

CONTENTS

Plenary

Section PLENARY SECTION

Room: CD 008

8

Section S1 MACHINE TOOLS

Room: CD 008

9

Section S2 INDUSTRIAL ROBOTS

Room: CB 109

11

Section S3 MACHINES AND EQUIPMENTS

Room: CD 008

10

Section S4 DRIVING SYSTEMS

AND CONTROL SYSTEMS

Room: CD 008

9

Section S5 CUTTING AND CUTTING TOOLS

Room: CB 110

12

Section S6 ADVANCED MANUFACTURING

TECHNOLOGIES

Room: CB 109

11

Section S7 APPROACH ON CAD, CAM, CAE

TECHNIQUES Room: CB 110

12

Section S8 INDUSTRIAL MARKETING

AND MANAGEMENT

Room: CK 110

13

8

PLENARY SECTION

Room CD 008, 930

-1430

, November 11th

, 2010

1. Improving CNC machine tools accuracy by means of the circular test and

simulation. Radu-Eugen BREAZ, Octavian BOLOGA, Gabriel RACZ,

Valentin OLEKSIK

2. Investigation of temperatures and residual stresses in speed stroke grinding via

FEA simulation and practical tests. Michael DUSCHA, Fritz KLOCKE,

Anna d’ENTREMONT, Barbara LINKE, Hagen WEGNER

3. Gear-type tool profiling - a comparison between a CAD method and the

analytical method. Gabriel FRUMUŞANU, Siliviu BERBINSCHI,

Virgil TEODOR, Nicolae OANCEA

4. Additive manufacturing systems for 3D direct digital production of

thermoplastic material parts, Lucian BOJOR

5. Mechatronics between dream and actual reality.

Florin IONESCU, Ion BOSTAN, Valeriu DULGHERU, Dragoş AROTĂRIŢEI,

George CONSTANTIN, Florin STRATULAT

6. Experimental characterization of robot arm rigidity in order to be used in

machining operation. Jean-Yves K’NEVEZ, Mehdi CHERIF, Miron ZAPCIU,

Alain GERARD

7. Simulation potentalities for a reciprocatin compressor.

Christian LANDSCHUETZER, Andreas WOLFSCHLUCKNER

8. Milling competence in a package for perfect surfaces. Matjaz MLINSEK

9. System identification of assembly cells –increased accuracy and demand-driven

reconfiguration. Rainer MÜLLER, Martin ESSER, Christian JANSSEN,

Matthias VETTE

10. Identification of influent factors on surface integrity in nickel-base superalloy

drilling. Andrei POPA, Vincent DUTILH, Maher BAILI, Gilles DESSEIN,

Géraldine PERRIN

11. Points of view concerning the future of manufacturing and manufacturing

systems, Laurentiu SLATINEANU

9

MACHINE TOOLS. MACHINES AND EQUIPMENTS. DRIVING SYSTEMS

AND CONTROL SYSTEMS

Room CD 008, 1445

-1815

, November 11th

, 2010

Moderators: Constantin ISPAS, Alain GERARD, Gavrilă CALEFARIU,

Ilie Octavian POPP, Mikho MIKHOV, Gheorghe SINDILĂ

1. Reducing the inertial mass of large bearings in wind turbine system using.

Sorin BARABAS, Adriana FOTA, Cornel SERBAN

2. Analysis of the perturbations brought about by the tool flow in the manufacturing

systems. Magdalena BARBU, Gavrilă CALEFARIU, Gheorghe BONCOI

3. Electro-hydraulic servo-system stability analysis. Ioan BÂRSAN, Ilie POPP

4. Dynamic behaviour of machine tool motor spindle by Eddy current monitoring.

Claudiu BÎŞU, Miron ZAPCIU, Dorel ANANIA, Constantin ISPAS,

Constantin MINCIU

5. Mathematical modelling and computer simulation of the kinematics of presses

with crank-connecting rod mechanism. Corneliu CRISTESCU, Stefan VELICU,

Alexandru VELICU, Constanta CRISTESCU

6. Studies concerning the particle conglomeration in the fluidic mills.

Ileana FULGA, Eugen STRĂJESCU

7. Relevant aspects when developing a new customized product – marble and

granite CNC bevelling machine. Mihaiela ILIESCU, Marian LAZĂR

8. An approach to control of multi-motor electromechanical systems.

Mikho MIKHOV

9. Simulation of a pendulum-driven cart system horizontal motion generated by

static friction. Adrian Stanislav MINÁRIK, Vladimír LABAŠ, Marián KUBLIHA,

Ondrej BOŠÁK, Ján KALUŢNÝ, Peter HANISKO, Juraj SLABEYCIUS

10. Intelligent diagnostics of machining process in CNC machines.

Jaromír MURČINKO, Zuzana MURČINKOVÁ

11. The dynamic parameters in designing of linear electromechanic actuators.

Vasile NĂSUI, Radu COTETIU, Mircea LOBONTIU, Nicolae UNGUREANU

12. Device for measurement of clamped joints friction torque. Anton PANDA,

Eva BATEŠKOVÁ, Jozef MAŠČENIK

10

13. Bevelling of rib cage on tapered roller bearing. Anton PANDA, Jozef JURKO

Iveta PANDOVÁ, Tadeáš KURILOVSKÝ

14. Preferences, utility function and control design of complex processes.

Yuri PAVLOV

15. Consideration regarding the benefits of condition monitoring techniques for

predictive maintenance. Ilie Octavian POPP, Ioan BARSAN

16. Experimental research concerning the achievement of the lubricants global

performance passport. Irina RĂDULESCU, Constantin MINCIU,

Alexandru V. RĂDULESCU

17. System and methodology for the analysis, diagnosis and correction of human

locomotion. Vladimir SCHOR, Gheorghe SINDILĂ, Diana POPESCU,

Nicoleta CĂRUŢASU, Beatrice NICA

18. Minimizing the errors of surface machining through interpolation on numerical

control machine tools. Gheorghe STAN

11

INDUSTRIAL ROBOTS. ADVANCED MANUFACTURING TECHNOLOGIES

Room CB 109, 1445

-1815

, November 11th

, 2010

Moderators: Tadeusz NIESZPOREK, Laurenţiu SLĂTINEANU,

Mircea LOBONŢIU, Yuri PAVLOV, Tudor DEACONESCU

1. The execution time of the models in the case of FDM technology.

Zoltan-Gabor BAKI-HARI, Carmen Gabriela BĂCILĂ

2. Analysis of the perturbations brought about by the tool flow in the

manufacturing systems. Magdalena BARBU, Gavrilă CALEFARIU,

Gheorghe BONCOI

3. Construction and dynamic performance of a pneumatic muscle actuated

translation module for robotic arms designed for wheelchairs.

Tudor DEACONESCU, Andrea DEACONESCU

4. Effect of the conditions and kinematics of working on the design of thread

rolling tools. Kazimierz ŁYCZKO, Tadeusz NIESZPOREK

5. Automation of hard turning process with Fanuc manual guide support and

CNC programme generation. Jozef MAJERÍK, Jaroslav JAMBOR

6. The technological aspects of complex shaped parts manufacturing and its

practical utilization. Katarina MONKOVA, Peter MONKA

7. Analysis of springback in the case of rectangular drawn parts made from

aluminium alloy sheets. Neculai NANU, Gheorghe BRABIE

8. Design of industrial robot grippers. Jarmila ORAVCOVÁ,

Miriam MATÚŠOVÁ, Peter KOŠŤÁL

9. Ultrasound in machining. František PECHÁČEK, Erika HRUŠKOVÁ,

Angela JAVOROVÁ

10. Analysis of thickness variation in the case of cylindrical micro drawn parts

made of very thin metal sheets. Elena RADU-COSTACHE, Gheorghe BRABIE

11. Experimental investigation and optimization of kerf characteristics in abrasive

waterjet trepanning of thick kevlar-epoxy composites.

Tauseef Uddin SIDDIQUI, Mukul SHUKLA

12. Elastic deflection of the cylindrical workpieces during the machining.

Laurenţiu SLĂTINEANU, Margareta COTEAŢĂ, Irina BEŞLIU GRIGORAŞ,

Mihai BOCA

12

CUTTING AND CUTTING TOOLS. APPROACH ON CAD, CAM, CAE

TECHNIQUES

Room CB 110, 1445

-1815

, November 11th

, 2010

Moderators: Eugen STRĂJESCU, Peter MONKA, Paul Dan BRÎNDAŞU,

Velimir TODIC, Constantin MINCIU

1. Laser pumping cavities made of modular elements. Iulian AVARVAREI,

Octavian DONTU, Daniel BESNEA, Robert CIOBANU

2. Experimental results as regards the quality of the surfaces obtained by precision

cutting of the bars. Romeo Cioară, Ruxandra Cioară

3. Optimization of cutting conditions when five axis milling using ball nose end

mills. Theoretical study. Vlad DICIUC, Mircea LOBONŢIU, Marius COSMA

4. FEM application for analysis of the optimal structure variants for hot billets

automatic-loading system. Georgi GEORGIEV

5. Study of analyasis of temperature and stresses of cutting tools during drilling of

stainless steels. Jozef JURKO, Mário GAJDOŠ, Tadeusz ZABOROWSKI

6. Influence of tool axis inclination angle on the surface roughness in ball end

milling of OLC45 (C45) material. Mircea LOBONŢIU, Ioan PAŞCA

7. The possibilities of Group Representative utilization at NC Machining within

New CAPP Software. Katarina MONKOVA, Peter MONKA

8. Computational methods for wider application of short-fiber composite.

Zuzana MURČINKOVÁ

9. Finite element analysis of vibrating beam structural elements with transversal

crack. Milan NAĎ, Eva LABAŠOVÁ, Rastislav DURIŠ

10. Aspects regarding product lifecycle management of cutting tools.

Gabriel Vasile ONIŢĂ, Paul Dan BRÎNDAŞU, Livia Dana BEJU

11. New stochastic models applied to manufacturing systems. Adrian Stere PARIS,

Constantin TÂRCOLEA

12. Regression models applied to manufacturing systems. Adrian Stere PARIS,

Constantin TÂRCOLEA

13. Finite element analysis of bolted joint. Iuliana PISCAN, Nicolae PREDINCEA,

Nicolae POP

14. Surface quality analysis of 102Cr6 bearing steel after CC6050 insert by hard

turning and by SG grinding wheel. Jana ŠTEININGEROVÁ, Jozef MAJERÍK

15. Measurement and analysis of cutting forces and deformation at milling thin parts.

Ioan TĂNASE, Adrian GHIONEA, Ionuţ GHIONEA

13

MARKETING AND MANAGEMENT

Room CK 110, 1445

-1815

, November 11th

, 2010

Moderators: Costel MIRONEASA, Cristina MOHORA, George DRĂGOI,

Peter KOSTAL, Adrian PÎSLĂ

1. Integration of process planning for distributed manufacturing in virtual

environment. Saša ŠUKOVIŠ, Milan ERIŠ, Goran DEVEDŢIŠ,

Vanja LUKOVIŠ, Ionuţ GHIONEA

2. Increasing of effectiveness of manufacturing and directing technical level.

Erika HRUŠKOVÁ, Radovan HOLUBEK

3. Lowering costs with lean maintenance. Traian IONESCU, Alexandru VELICU,

Stefan VELICU

4. Material flow in flexible production systems. Peter KOŠŤÁL,

Andrea MUDRIKOVÁ, Daynier Rolando DELGADO SOBRINO

5. Model of modern technological production preparation. Dejan LUKIŠ,

Velimir TODIŠ, Mijodrag MILOŠEVIŠ

6. Material flow analysis of designed flexible manufacturing CELL (FMS).

Miriam MATUSOVA, Angela JAVOROVA

7. Survey implementation of training for integrated management systems.

Costel MIRONEASA, Silvia MIRONEASA

8. Elements for modeling change management. Adrian PÎSLĂ, Tudor IRIMIAŞ,

Romică MUNTEAN

9. Information flows in planning and operating business in production enterprises.

Adrian PÎSLĂ, Romică MUNTEAN, Tudor IRIMIAŞ

10. Risk assessment in the implementation of composite materials. Irina PETRESCU,

Constantin ISPAS, Cristina MOHORA

11. Virtual enterprise networks solutions to support the virtual teams work.

Sebastian Marius ROŞU, George DRĂGOI, Luminiţa ROŞU

12. A professional risk assessment scenario at the SMEs level using knowledge

bases. Sebastian Marius ROŞU, George DRĂGOI, Tatjana ŠIBALIJA,

Vidosav D. MAJSTOROVIŠ

14

Universitatea POLITEHNICA din Bucureşti

Facultatea

INGINERIA ŞI MANAGEMENTUL SISTEMELOR

TEHNOLOGICE Splaiul Independenţei 313, Sector 6, Bucureşti -77206

Telefon (021) 4029302

Corp CD

Facultatea IMST este o facultate modernă care asigură

programe de învăţământ racordate la Sistemul European de Credite

pentru pregătirea studenţilor în următoarele specializări:

TEHNOLOGIA CONSTRUCŢIILOR DE MAŞINI

MAŞINI – UNELTE ŞI SISTEME DE PRODUCŢIE

UTILAJUL ŞI TEHNOLOGIA SUDĂRII

INGINERIE ECONOMICĂ INDUSTRIALĂ

ROBOŢI INDUSTRIALI

Facultatea lMST asigură pregătirea avansată a absolvenţilor prin studii aprofundate şi master, pe direcţii ce extind domeniile tradiţionale ale facultăţii: Ingineria Proiectării şi Fabricării Produselor, Strategii Manageriale, Logistica Sistemelor de Producţie, Tehnologii Avansate pentru Sudură şi Control Nedis-tructiv, Tehnologii Avansate pentru Materiale Noi, Inginerie Asistată de Calculator, Calitatea în Inginerie şi Design, Ingineria Economică a Sistemelor de Producţie.

15

ASIGURĂ pregătirea inginerilor secolului XXI pentru

proiectarea şi cercetarea în specialităţile:

Maşini-unelte

Roboţi idustriali

Tehnologii şi sisteme

electrofizice

De experienţa, competenţa dinamismul şi

creativitatea cadrelor didactice beneficiază

nu numai studenţii noştri ci şi specialişti

din industrie

REALIZEAZĂ studii şi proiecte pentru maşini-

unelte, sisteme flexibile de

fabricaţie, scule şi sisteme de scule,

roboţi industriali şi manipulatoare,

maşini de prelucrat prin deformare

etc.

ORGANIZEAZĂ cursuri intensive de pregătire

postuniversitară sau orientare

profesională în domeniul programării

maşinilor-unelte, comandă numerică,

proiectare asistată, modelarea şi

simularea fenomenelor de aşchiere,

deformare plastică, comportare

dinamica

OFERĂ consultaţii pentru retehnologizarea,

automatizarea, proiectarea asistată,

testarea comportării statice şi

dinamice a maşinilor şi utilajelor,

diagnoza tehnica

ÎNDRUMĂ activitatea de doctorat în domeniul

fundamental ŞTIINŢE

INGINEREŞTI – domeniul

INGINERIE INDUSTRIALĂ

(preocupări în: maşini-unelte, sisteme

integrate de prelucrare, roboţi

industriali, management de proiect).

CONTRIBUIE la pregătirea studenţilor facultăţii

Ingineria şi Managementul Sistemelor

Tehnologice, cei mai mulţi dintre

absolvenţii acesteia fiind în prezent

manageri, cadre de conducere în

industrie şi administraţie, specialişti în

cercetare, învăţământ, proiectare şi

exploatare

Universitatea POLITEHNICA din Bucureşti Facultatea Ingineria şi Managementul

Sistemelor Tehnologice

CATEDRA MAŞINI ŞI SISTEME DE PRODUCŢIE Splaiul Independenţei 313, 060042, Bucureşti,

Tel: +40 21 402 94 20; +40 21 402 93 69, Fax: +40 21 402 97 24

16

NATIONAL RESEARCH CENTRE FOR PERFORMANCES OF

TECHNOLOGICAL SYSTEMS

Optimum Splaiul Independentei 313, sector 6, Bucharest, 060032, Romania

Http://sun.cfic.pub.ro; tel/fax: (+40)021 402 97 24

17

18

Editura Academiei Române

(The Publishing House of the Romanian Academy)

Calea 13 Septembrie, nr.13, sector 5, 050711,

Bucureşti, România

Tel: +40-21-318 81 46

+40-21-318 81 06

Fax: +40-21-318 24 44

The Publishing House of the Romanian Academy was constituted in 1948 and

ever since it continued, during 55 years, publishing journals and books – activity begun

in 1868 by the high scientific and cultural Romanian academic forum.

The publishing house of the Romanian Academy publishes works regarding

Romanian Academy’s activity, its scientific sections and institution, critical editions of

some classic author’s works, treaties and historical documents, atlases and linguistic

dictionaries, works of the Romanian Academy’s members and of Romanian specialists

and personalities, books written in widely used foreign language which allow the

Romanian cultural, scientifical and spiritual creations to be known worldwide,

explanatory dictionaries containing specialty terms from many scientifical fields,

multimedia products, CD-ROM type, with animated images and audio recordings.

The Publishing House of the Romanian Academy also edited periodical

publications of Romanian Academy’s sections, committees, research institutes (about 80

journals), from which we mentioned those for Mathematics, Physics, Technical

Sciences and also Information Science and Technology: Proceedings of the Romanian

Academy. Series A: Mathematics, Physics, Technical Science, Information Science (3

issue per year); Mathematical Reports (4 issue per year); Revue roumaine de

mathématiques pure et appliqués (6 issue per year); Mathematica (2 issue per year);

Revue d`analise numérique et de théorie de l`approximation (2 issue per year);

Romanian Reports in Physics (4 issue per year); Romanian Journal of Physics (10 issue

per year); Revue roumaine des sciences techniques. Série de Mécanique appliquée (6

issue per year); Revue roumaine des sciences techniques. Série d`électronique et

énergétique (4 issue per year); Romanian Journal of Information Sciences and

Technology (4 issue per year); Fuzzy System & A.I. (1 issue per year).

The Publishing House of the Romanian Academy co edits book with other

Romanian and foreign publishing house. Many copies from the published books and

journal are exchanged with the help of the Romanian Academy Library.

Supplementary information regarding the activity and achievements of the Publishing

House of Romanian Academy are to be found on the web page: www.ear.ro.

19

We are building a world that’s safer and more secure More comfortable and energy efficient

More innovative and productive We are Honeywell

Honeywell is a diversified technology and manufacturing leader serving

customers worldwide with aerospace products and services; control technologies for buildings, homes and industry; automotive products; turbochargers; and specialty materials.

Rated as a top 100 Fortune company More than 100.000 employees worldwide Four diversified business groups Exemplifying innovation for over 100 years

Operating since 1998, Bucharest Honeywell Garrett is now a world class

turbochargers assembly plant, a company that shares a culture founded on technological excellence, commitment to quality and customer service. Bucharest plant Honeywell Garrett is part of the Transportation Systems Group and offers turbocharger systems for both Passenger Vehicles and

Commercial Vehicles. Honeywell Garrett is the biggest plant of its kind within the group and where the latest technology is launched. Important dates for us: July 2003 - 1

st turbocharger (previously the

plant was producing turbochargers parts) January 2005 - 1 millionth turbocharger December 2009 - 10 millionth turbocharger

Honeywell Garrett Bucharest Today

550+ plant employees 3 working shifts 430+ operators 150 support functions 110 European & Worldwide functions located on the site

For more information about us: Website: www.honeywell.ro Email: resurse.umane@honeywell.com

20

DR. JOHANNES HEIDENHAIN GmbH dezvoltă şi produce encodere liniare şi unghiulare, encodere de rotaţie, afişaje, tastere şi comenzi numerice pentru poziţionări performante. Produsele HEIDENHAIN se regăsesc în maşini-unelte de precizie şi, de asemenea în utilaje pentru producerea componentelor electronice.

Dr. JOHANNES HEIDENHAIN Reprezentanţă

Tel. 0268 318476

Fax 0268 319476

Mail: info@heidenhain.ro

21

22

INTERNATIONAL G&T SRL Str. Selimbar Nr. 41 Magurele – Ilfov Tel: 021 457 11 69 Fax:021 457 11 70 office@internationalgt.ro; serban.totoescu@internationalgt.ro www.internationalgt.ro

Firma noastra, fondata in 1994 s-a ocupat de la inceput cu comercializarea masinilor unelte de la cei mai renumiti producatori din Elvetia, Germania, Spania; printre ei mentionam: STARRAGHECKERT, HAUSER – TRIPET - TSCUDIN, SCHAUBLIN, REISHAUER, HERMLE, ONA, POSALUX, FLP MICROFINISHING.

Practic acoperim toate domeniile aschierii, adica frezare, strunjire, rectificare, superfinisare si eroziune. In decursul timpului, am vandut peste 100 de masini CNC, toate de o calitate ireprosabila si precizie extrem de ridicata, neintrand niciodata in domeniul “Cea mai ieftina masina din clasa ei”.

Firma noastra asigura de asemenea si punerea in functie, service-ul in garantie si post-garantie si pentru majoritatea masinilor noi asiguram si scolarizarea personalului, printr-o echipa de service extrem de competenta.

O alta activitate o constituie vanzarea de programe CAD – CAM ESPRIT de la firma americana DP TECHNOLOGIES, printre cele mai puternice din lume la ora actuala. De altfel, am reusit dotarea gratuita a mai multor universitati din tara cu acest soft: Bucuresti, Timisoara, Iasi, Cluj, Brasov si Suceava. Tot in acest sens am sprijinit U.P. Timisoara in obtinerea unor licente de SINUTRAIN, un soft de simulare a comenzilor numerice SIEMENS.

In principiu, masinile vandute de noi se adreseaza acelora care au nevoie de maxima precizie , fiabilitate ridicata pentru lucrul 24 de ore din 24 , 7 zile din 7.

23

Sartorom Impex SRL

SARTOROM IMPEX SRL is one of the top companies in our country, already brand

established on the Romanian market as distributors for laboratory equipment.

SARTOROM IMPEX SRL is active on the Romanian market since 1992 with a

continuous growing customer portfolio due to the close and permanent contact with the

customer’s needs and demands but also due to our professional attitude and reliability as

well.

We are the exclusive representatives for manufacturers like: Sartorius, Denver

Instruments, Fritsch, Netsch, Zwick/Roell, Ika.

Beside the main headquarters in Bucharest we have branches in all major cities in

Romania: in Timisoara, Cluj, Craiova, Brasov, Braila, Iasi.

Zwick at a glance - Customer focus is the basis of our corporate

philosophy.

The Zwick Roell Group is one of the world's leading manufactures for complete

static and dynamic systems and software for materials and component testing.

This includes tensile, compression, flexure and cyclic, fatigue and durability

tests on metals, plastics, and components. With our extensive portfolio of

testing machines, systems and software we supply customized solutions for

virtually every application related to materials testing.With innovative product

development, a comprehensive range and worldwide service, this family

concern supplies tailor-made solutions for the most demanding requirements –

in both research and development and quality assurance in over 20 sectors. With

over 900 employees, a production facility in Ulm, Germany, additional agencies

in 56 countries worldwide, the Zwick brand name guarantees the highest

product and service quality.

For over 150 years the name of Zwick Roell has stood for outstanding technical

competence, innovation, quality and reliability in materials and component

testing. Our customers’ confidence in us is reflected in our position as world-

leaders in static testing and the significant growth we are experiencing in fatigue

strength testing systems.

For the Zwick safety technology we make no compromises by using only high-

quality, industry-proven safety components in all products.

24

25

your partner to knowledge

Despre Companie

Infiintata in anul 1997, ca societate cu raspundere limitata, DIGITLINE Automatizari beneficiaza de o vasta experienta în domeniul proiectarii si executiei echipamentelor de testare si diagnoza si instalatiilor de automatizare. Pe tot parcursul activitatii am urmarit consecvent, dezvoltarea si implementarea de solutii moderne, menite sa ofere beneficiarului maxima satisfactie si garantie. Asiguram in acelasi timp, la un inalt nivel calitativ, instruirea si perfectionarea continua a clientilor nostri. Dintre parteneri mentionam Centrul National de Cercetare a Performantelor Sitemelor Tehnologice – OPTIMUM si Compania National Instruments impreuna cu care concepem si testam o mare parte a solutiilor tehnice. DIGITLINE are Sistemul de Management al Calitatii certificat in conformitate cu cerintele standardului SR EN ISO 9001 : 2001. Prin Decizia 9725/25.08.2008 a Autoritatii Nationale pentru Cercetare Stiintifica, DIGITLINE a fost atestata ca Unitate de Cercetare - Dezvoltare conform HG NR. 551/2007. Produse

Software pentru aplicaţii industriale Analizoare de sunete, vibraţii şi parametri electrici Standuri de testare şi diagnoză Echipamente de monitorizare la distanţă Instalaţii de automatizare Economizoare de energie Servicii de diagnoză şi echilibrare Servicii de proiectare Marci inregsitrate

FASTVIEW este marca inregistrata la OSIM de catre DIGITLINE automatizari

. Softul FASTVIEW este inregistrat la ORDA de catre DIGITLINE Automatizari si se afla sub protectia drepturilor de autor.

26

27

28

NOTITE

29

30

31

32