15
4th International Conference & Exhibition on Thermoplastic Composites 30 – 31 October 2018 MESSE BREMEN, Germany Conference Programme www.ithec.de Platinum Sponsor
4th International Conference& Exhibition onThermoplastic Composites
30 – 31 October 2018 MESSE BREMEN, Germany
Conference Programme
www.ithec.de
Platinum Sponsor
| 3 2
Axel Herrmann Hubert BorgmannConference Chair Project Manager ITHECUniversität Bremen MESSE BREMEN
Greeting
Dear Ladies and Gentlemen,
Welcome to the ITHEC 2018 4th International Conference & Exhibition on Thermoplastic Composites. This year you can experience a further growing ITHEC exhibition. A growth resulting from the second hype in thermoplastic composites in industry taking place, now.
First applications of thermoplastic composites (TPC) date back to the 1980’s – structural parts of the US-military jet F22 such as the landing-gear-door and weapon-by-door were composed of TPCs. In the 1990’s a first hype on TPC emerged starting with the development of a thermo-plastic outer wing trailing edge skin for the FOKKER50 passenger air-craft. Although until then TPC structural parts have only been used for niche applications the automotive industry expressed interest and de-mands in the material. The idea was to achieve a material substitution from press-formed metal sheets to press-formed thermoplastic organo sheets, realising significant weight and service cost reduction. Compa-nies like BASF set up development centres to support and speed up the introduction of TPCs in automotive. Nevertheless, no serial application in mass production had been launched.
The following decade focused on a broader use of thermoset composite systems until recently the aircraft industry decided to intensify the activities in the direction of TPCs again with a lot of new ideas and processes. Both, Boeing and Airbus are developing the second genera-tion CFRP fuselage composed of TPCs.
In the future a key enabler will be the hybridisation of processes like the combination of press-forming and injection-moulding or tailored fibre placement. With new build concepts reaching a higher degree of inte-gration it seems that a thermoplastic fuselage can be cost competitive with a metallic fuselage. Regarding the automotive industry, it has almost become common sense in the branch that the mass production of parts with today’s thermoset composites will not be cost competitive without changing the entire custom of the car. With new process ap-proaches the use of thermoplastic composites seems to be the solution.Considering typical lead times of less than 1 min for mass-produced automotive components, TPCs are the only non-metallic alternative feasible.
The presentations at ITHEC provide a deep insight into the results of the latest projects and products and thus highlights the solutions for the second hype in thermoplastics. The conference will conclude with a panel discussion with experts and representatives from Boeing, Airbus and Toyota discussing the opportunities as well as the risks of the im-plementation of TPCs and the change from thermoset material systems. Looking forward to having you with us in Bremen.Best regards,
The organisers would like to thank all the sponsors and media partners!
Platinum SponsorTenCate Advanced Composites BV, Nijverdal, NL
Gold SponsorsEvonik Industries AG, Marl, DE
Thermoplastic composites Research Center (TPRC), Enschede, NL
Silver SponsorTeijin Carbon Europe GmbH, Wuppertal, DE
Event SponsorsEcoMaT – Center for Eco-efficient Materials & Technologies, Bremen, Germany
KraussMaffei Technologies GmbH, München, DE
Laser Zentrum Hannover e. V., Hannover, DE
Victrex Europa GmbH, Hofheim am Taunus, DE
Wickert Maschinenbau GmbH, Landau in der Pfalz, DE
Non-financial SponsorsAVK Industrievereinigung Verstärkte Kunststoffe e. V., Frankfurt am Main, DE
SAMPE Europe, Oerlingen, CH
Media PartnersComposites World / Gardner Business Media Inc., Cincinnati, US
JEC Group, Paris, FR
lightweightdesign / Springer Fachmedien GmbH, Wiesbaden, DE
MM Maschinenmarkt / Vogel Business Media GmbH & Co. KG, Würzburg, DE
Produktion / verlag moderne industrie GmbH, Landsberg, DE
REINFORCED plastics / Elsevier Ltd., Oxford, UK
SAMPE Journal / SAMPE, Diamond Bar, USA
| 5 4
Tuesday, 30 October 2018
from 7:30 Registration09:00 – 09:30 Opening / Welcoming (Hanse Saal)09:30 – 10:15 Keynote Automotive (Hanse Saal) Page 6
TimetableCommittees ITHEC 2018
Steering BoardI. Fernandez Villegas, Delft University of Technology, Delft, NL
H.E. Friedrich, DLR Institut für Fahrzeugkonzepte, Stuttgart, DE
G. Hansen, Faserinstitut Bremen e. V., Bremen, DE
A.S. Herrmann, Universität Bremen, Bremen, DE
F. Jansen, Teijin Carbon Europe GmbH, Wuppertal, DE
R. Lenferink, TenCate Advanced Composites BV, Nijverdal, NL
A.R. Offringa, GKN Fokker, Hoogeveen, NL
M. Risthaus, Evonik Ressource Efficiency GmbH, Marl, DE
H. Borgmann, MESSE BREMEN, Bremen, DE
Programme CommitteeA. Blom-Schieber, The Boeing Company, Seattle, WA, US
A. Brødsjø, Airborne, The Hague, NL
P. Ermanni, ETH Zürich, Zürich, CH
W. Grouve, University of Twente, Enschede, NL
P. Hansen, Haydale Composite Solutions, Loughborough, UK
F. Henning, Fraunhofer ICT, Pfinztal, DE
M. Huisman, Brightlands Materials Center, Geleen, NL
P. Mitschang, Institut für Verbundwerkstoffe GmbH, Kaiserslautern, DE
T. Renault, Faurecia, Nanterre, FR
F. Schemm, Victrex Europa GmbH, Hofheim / Taunus, DE
B. Schwing, Airbus Operations GmbH, Bremen, DE
K. Uzawa, Kanazawa Institute of Technology, Hakusan, JP
B. Wohlmann, Teijin Carbon Europe GmbH, Wuppertal, DE
M. Würtele, KraussMaffei Technologies GmbH, München, DE
Session E: Aerostructures II(Borgward Saal) Page 11
Session F: Automotive II(Hanse Saal Page 12
14:00 – 14:25 E1 14:00 – 14:25 F1
14:25 – 14:50 E2 14:25 – 14:50 F2
14:50 – 15:15 E3 14:50 – 15:15 F3
15:15 – 15:45 Coffee Break
15:45 – 16:10 E4 15:45 – 16:10 F4
16:10 – 16:35 E5 16:10 – 16:35 F5
16:45 – 17:15 Panel Discussion (Hanse Saal)17:15 – 17:30 Closing Remarks (Hanse Saal) / End of Conference
Session A: Automotive (Hanse Saal) Page 6
Session B: Emerging Technologies I(Borgward Saal) Page 7
10:15 – 10:40 A1 10:15 – 10:40 B110:40 – 11:05 A2 10:40 – 11:05 B211:05 – 11:35 Coffee Break11:35 – 12:00 A3 11:35 – 12:00 B312:00 – 12:25 A4 12:00 – 12:25 B412:25 – 12:50 A5 12:25 – 12:50 B512:50 – 14:50 Lunch Break
Wednesday, 31 October 2018
09:00 – 09:45 Keynote II Aerostructures (Hanse Saal) Page 1009:45 – 10:30 Keynote III
Emerging Technologies (Hanse Saal) Page 1010:30 – 12:00 Poster Session (Foyer Hall 4.1) Page 1612:00 – 14:00 Lunch Break
Session C: Aerostructures I(Hanse Saal) Page 8
Session D: Emerging Technologies II(Borgward Saal) Page 9
14:50 – 15:15 C1 14:50 – 15:15 D115:15 – 15:40 C2 15:15 – 15:40 D215:40 – 16:05 C3 15:40 – 16:05 D316:05 – 16:35 Coffee Break16:35 – 17:00 C4 16:35 – 17:00 D417:00 – 17:25 C5 17:00 – 17:25 D517:30 – 18:00 JEC Best Paper Award Ceremony (Hanse Saal)19:00 Conference Dinner at Bremer Ratskeller
| 7 6
Keynote
9:30 –
10:15
Keynote Automotive (Hanse Saal)The Current Situation and Issues of Thermoplastic Composite Use for Car BodyA. Mikuni, Toyota Motor Corporation, Toyota, JP
Session A: Automotive I (Hanse Saal)Session Chairs: M. Würtele
KraussMaffei Technologies GmbH, München, DE F. Henning
Fraunhofer ICT, Pfinztal, DE
A110:15
– 10:40
Model-predictive Control for the Automated Production of Thermoplastic Composite Pressure VesselsM. Schäkel*, H. Janssen, C. Brecher Fraunhofer IPT, Aachen, DE
A210:40
– 11:05
Manufacturing of Load Optimized Structural Parts from Thermoplastic Tapes with Focus on Flexibility and EfficiencyN. Müller, ENGEL Austria GmbH, St. Valentin, AU
11:05–
11:35Coffee Break
A311:35
– 12:00
Temperature-dependent Failure Analysis of Fibre-reinforced Thermoplastics for Automotive ApplicationsN. Schramm, L. Kroll Technische Universität Chemnitz, Chemnitz, DET. Grätzl, BMW Group, Landshut, DE
A412:00
– 12:25
Thermoplastic Profiles as Part of the Thermoplastic Composite Toolbox by SGL GroupV. Bühler*, A. Wöginger, S. Geh, J. Mögel SGL Technologies GmbH, Meitingen, DE
A512:25
– 12:50
Process Oriented Optimization Methodology for Tailored Preform Composite MoldingD. Espinassou, CETIM, Bouguenais, FRF.-X. Irisarri, ONERA, Chatillon, FRD. Guillon, CETIM, Bouguenais, FR
Session B: Emerging Technologies I (Borgward Saal)Session Chairs: P. Hansen
Haydale Composite Solutions, Loughborough, UK P. Ermanni
ETH Zürich, Zürich, CH
B110:15
– 10:40
In Situ-polymerizing Thermoplastic Epoxy Resin Widely Applicable to Various Molding Processes for Thermoplastic CompositesH. Nishida, K. Nunotani, K. Uzawa Kanazawa Institute of Technology, Hakusan-shi, JP
B210:40
– 11:05
Organomodified Siloxanes – An Additive Technology as Enabler to Establish Novel and Improve Existing Processing Technologies of Thermoplastics CompositesS. Heßner, K. Lehmann Evonik Nutrition & Care GmbH, Essen, DE
11:05–
11:35Coffee Break
B311:35
– 12:00
Additive Manufacturing of Endless Carbon Fiber Reinforced ThermoplasticsM. Czasny, G. Terhedebrügge, O. Kaba, F. Schmidt A. Gurlo, Technische Universität Berlin, Berlin, DE
B412:00
– 12:25
Optimizing the Thermoplastic Welding Properties in an FRPC Additive Manufacturing ProcessM. Eichenhofer, S. Arreguin Eidgenössische Technische Hochschule Zürich, Zürich, CH J.C.H. Wong, University of Calgary, Calgary, CAP. Ermanni,ETH Zürich, Zürich, CH
B512:25
– 12:50
Manufacturing of Fiber Reinforced Thermoplastics via Automated Powder-towpreg Placement and Direct-impregnationF. Kühn, D. May, P. Mitschang Institut für Verbundwerkstoffe GmbH, Kaiserslautern, DE
Programme
30 October 2018 30 October 2018
| 9 8Programme
Session C: Aerostructures I (Hanse Saal)Session Chairs: A. Blom-Schieber
The Boeing Company, Seattle, WA, US I. Fernandez Villegas
Delft University of Technology, Delft, NL
C114:50
– 15:15
Rapid Manufacturing of a Tailored Spar by AFP and Stamp FormingT. Slange, Y. Buser TPRC, Enschede, NL, and University of Twente, Enschede, NLS. Wijskamp, TPRC, Enschede, NLW. Grouve, R. Akkerman, University of Twente, Enschede, NL
C215:15
– 15:40
Creep of Discontinuous Long Fiber C/PEEK Above TgS. Stutz*, N. Weibel, GreeneTweed & Co., Yverdon, CH
C315:40
– 16:05
A Roadmap for Developing an Industrial Continuous Ultrasonic Welding Process for Thermoplastic CompositesF. Köhler, Composite Technology Center Stade, Stade, DE, and Delft University of Technology, Delft, NL B. Jongbloed, T. FilipeDelft University of Technology, Delft, NLA. Herrmann, Composite Technology Center Stade, Stade, DEI.F. Villegas, R. Benedictus Delft University of Technology, Delft, NL
16:05–
16:35Coffee Break
C416:35
– 17:00
Quality Assured Stiffened Skin Production Relying on Fully-automated Patch-preforming and Oven Vacuum ConsolidationA. Schuster, F. Fischer, C. Frommel, M. Willmeroth, A. Thellmann, R. Glück, M. Kupke DLR e. V., Augsburg, DE
C517:00
– 17:25
Injection Forming of Gears on High-performance CF-PAEK Drive ShaftsD. Barfuss, C. Garthausherone GmbH, Dresden, DEF. Schemm, Victrex Europa GmbH, Hofheim am Taunus, DER. Kupfer, Technische Universität Dresden, Dresden, DE
17.30–
18:00
JEC Best Paper Award Ceremony (Hanse Saal)F. Reux, JEC Group, Paris, FRA.S. Herrmann, Universität Bremen, Bremen, DEH. Borgmann, MESSE BREMEN, Bremen, DE
Session D: Emerging Technologies II(Borgward Saal)Session Chairs: P. Hansen
Haydale Composite Solutions, Loughborough, UK
P. Ermanni ETH Zürich, Zürich, CH
D114:50
– 15:15
Industrialised and Digital Manufacturing of Thermoplastic CompositesM. Kremers, M. MuilwijkAirborne, The Hague, NL
D215:15
– 15:40
Joining of Multi-material Assemblies by the MultiMaterial-Welding Technology – Development of an Online Process Monitoring SystemC. Brauner, L. Zweifel, C. DransfeldFachhochschule Nordwestschweiz, Windisch, CHM. Rheme, G. EckhardMM MultiMaterial-Welding GmbH, Schlieren, CHW. Pfister, KVT-Fastening AG, Dietikon, CH
D315:40
– 16:05
In-process and in-situ monitoring of process parameter in fusion bonding of thermoplastic compositesJ. Pandher, M. Van ToorenUniversity of South Carolina, Columbia, US
16:05–
16:35Coffee Break
D416:35
– 17:00
RecyCarb: Process Scale-up into Industrial Viable Scale for the Re-use of Carbon Fibre Waste in Sophisticated Fibre-reinforced Plastics.M. Hofmann, Sächsisches Textilforschungsinstitut e. V., Chemnitz, DEH. Fischer, Faserinstitut Bremen e. V., Bremen, DEK. Heilos, Sächsisches Textilforschungsinstitut e. V., Chemnitz, DEA. Miene, Faserinstitut Bremen e. V., Bremen, DE
D517:00
– 17:25
Recycling Thermoplastic Composites Using Low-shear Mixing: an Experimental Study on Complex GeometriesG. Vincent*, University of Twente, Enschede, NL, and TPRC, Enschede, NLT.A. de Bruijn, Saxion University of Applied Sciences, Enschede, NLM.I. Abdul Rasheed, University of Twente, Enschede, NLS. Wijskamp, TPRC, Enschede, NL
30 October 2018 30 October 2018
| 11 10
31 October 2018
Keynote
9:00 –
9:45
Keynote Aerostructures II (Hanse Saal):Thermoplastic Composites & Airplane ProductionD. Trop, The Boeing Company, Seattle, UST. Benson Tolle, The Boeing Company, Seattle, US
Keynote
9:45 –
10:30
Keynote Emerging Technologies (Hanse Saal)Developments in the Composites Industry: New Markets and Emerging TechnologiesE. Witten, AVK – Industrievereinigung Verstärkte Kunststoffe e. V., Frankfurt am Main, DE
10:30 –
12:00Postersession (Foyer Hall 4.1), see page 16 for details
31 October 2018
Session E: Aerostructures II (Hanse Saal)Session Chairs: A. Blom-Schieber
The Boeing Company, Seattle, WA, US I. Fernandez Villegas
Delft University of Technology, Delft, NL
E114:00
– 14:25
Manufacture and Characterization of a Variable Stiffness, Unitized, Integrated-stiffener Thermoplastic WingboxD. Peeters, G. Clancy, V. Oliveri, G. Zucco R. Telford, A. Bandaru, M. Rouhi, R. O’Higgins T. Young, P.M. WeaverUniversity of Limerick, Limerick, IE
E214:25
– 14:50
A New Generation of Thermoplastic Lining Panels for Aerospace ApplicationT. Joppich, Fraunhofer ICT, Pfinztal, DEV. Wippo, Laser Zentrum Hannover e. V., Hannover, DEA. Menrath, Fraunhofer ICT, Pfinztal, DEP. Jäschke, Laser Zentrum Hannover e. V., Hannover, DEF. Henning, Fraunhofer ICT, Pfinztal, DE
E314:50
– 15:15
Processing of Thermoplastic Composites, Developments & Future ChallengesH. Luinge, TenCate Advanced Composites, Nijverdal, NL
15:15–
15:45Coffee Break
E415:45
– 16:10
Suitable Coupon Design for Assessment of Interface Strength in Overmoulded Structures Made from Fibre Reinforced High-Performance ThermoplasticsR. Gaitzsch, M. KoerdtFaserinstitut Bremen, Bremen, DE
E516:10
– 16:35
Trends, Development and Qualification of the Thermoplastic Induction Welding Process in Aerospace ApplicationsM. Labordus, KVE Composites Group, The Hague, NL
Meet us at our booth C 03 and learn more about our thermoplastic carbon fiber products.
www.teijincarbon.com
Programme
| 13 12
31 October 2018
Session F: Automotive II (Borgward Saal)Session Chairs: M. Würtele
KraussMaffei Technologies GmbH, München, DE, F. Henning
Fraunhofer ICT, Pfinztal, DE
F114:00
– 14:25
Continuous Production of Thermoplastic Sandwich Structures and their Functionalization via Hybrid Injection Molding TechnologyT. Gläßer; A. Geyer, Fraunhofer IMWS, Halle, DEJ. Pflug, ThermHex Waben GmbH, Halle, DER. Schlimper; M. Zscheyge, Fraunhofer IMWS, Halle, DE
F214:25
– 14:50
Hybrid Thermoplastic Composites for E-mobility: A novel Approach for a One-shot Process Route Including a Holistic Virtual DesignS. Baumgärtner*, T. Link, Fraunhofer ICT, Pfinztal, DEJ. Rausch, Audi AG, Neckarsulm, DES. Ebli, BASF SE, Ludwigshafen, DED. Dörr, M. Hohberg, Karlsruher Institut für Technologie, Karlsruhe, DEM. Graf, DIEFFENBACHER GMBH, Eppingen, DEH.J. Wetterau, FRIMO Sontra GmbH, Sontra, DEF. Henning, Fraunhofer ICT, Pfinztal, DE and Karlsruher Institut für Technologie, Karlsruhe, DE
F314:50
– 15:15
In-line Process Monitoring of Series Production of Endless Fiber Reinforced ComponentsS. Schierl, KraussMaffei Technologies GmbH, München, DEM. Cetin , C. Herrmann KraussMaffei Automation GmbH, Oberding-Schwaig, DE, S. Fenske, KraussMaffei Technologies GmbH, München, DE
15:15–
15:45Coffee Break
F415:45
– 16:10
Manipulating Glass Fibre Architecture for the Efficient Manufacturing of Thermoplastic CompositesN. Aegerter, C. Schneeberger, S. ArreguinEidgenössische Technische Hochschule Zürich, Zürich, CH J.C.H. Wong, University of Calgary, Calgary, CAP. Ermanni, Eidgenössische Technische Hochschule Zürich, Zürich, CH
F516:10
– 16:35
SAFEMIUM: Multifunctional Security Parts for Premium VehiclesG. Hoyos, N. Markaide, A. Rekondo CIDETEC, Donostia, ES
16:45 –
17:15
Panel Discussion (Hanse Saal)Thermoplastic Composites – The Solution for Cost-effective Mass Production in Aircraft, Automotive and other Industries?Discussion PartnersT. Benson Tolle, The Boeing Company, Seattle, USJ. Gralfs, Airbus Operations GmbH, Hamburg, DEA. Mikuni, Toyota Motor Company , Toyota, JPFrank Meurs, TenCate Advanced Composites BV, Nijverdal, NLI. Fernandez Villegas, Delft University of Technology, Delft, NL
Hosted by M. Effing, Composites Germany, Frankfurt am Main, DE and AVK, Frankfurt am Main, DE andAMAC GmbH, Aachen, DE
31 October 2018
Engineering Passion
www.kraussmaffei.com
Fiber composite solutionsfor advanced lightweight components
KM_Anz_Leichtbau2015_EN_98x100+1.indd 1 02.06.16 10:13
Programme
t +31 548 633 933,e [email protected] www.tencatecomposites.com/thermoplastics
TenCate Cetex® Hybrid fl ow layer usingrecycled thermoplastic composites
TenCate Cetex® TC1225 Engineered PAEK,suitable for overmolding in one or two shots
TenCate Cetex® TC1320 PEKK Uni-directional tape using Advanced Fiber Placement
Invested in Your Success
The result of over 30 years of continuous investment and innovation, TenCate’s Cetex® is the proven thermoplastic material of choice for high volume productionof advanced composite structures.
TenCate’s Cetex® thermoplastics have demonstrated fl awless performance in the most demanding environments, and meet a wide range of OEM qualifi cation requirements across many industries.
Together with our valued technology partners, TenCate continues to innovate and push the boundaries of material science to deliver the composite solutions of tomorrow, more affordably and effi ciently than ever before.
Leading the Thermoplastic Revolution
Concepts advert Ithec 2018_v1.6.indd 1 18/06/2018 10:35:26
| 17 16Programme
31 October 201831 October 2018
Poster Session 10:30 – 12:00 (Foyer Hall 4.1)
P 07
Mechanical Investigation of Resistance Welded High-performance Reinforced ThermoplasticsS. Bauer, DLR e. V., Augsburg, DEM. Endraß, DLR e. V., Stuttgart, DEG. Doll, DLR e. V., Augsburg, DES. Jarka, DLR e. V., Stuttgart, DEA. Thellmann, DLR e. V., Augsburg, DEA. Schuster, DLR e. V., Stuttgart, DE
P 08
Data Acquisition and Monitoring for Thermoplastic Components Produced using Automated Fibre PlacementA. Chadwick, A.-H. Thellman M. Willmeroth, P. Dreher DLR e. V., Augsburg, DE
P 09
Design and Experimental Verification of Optimized Intercostal of Tailored BlankJ. Křena, Latecoere Czech Republic, Prague, CZR. Růžek, J. Šedek Aeronautical Research and Testing Institute, Prague, CZ
P 11
Development of Continuous Ultrasonic Welding for the Automated Production of Aircraft Primary StructuresM. Engelschall, S. Jarka, F. Fischer, S. Bauer L. Larsen, M. WillmerothDLR e. V., Augsburg, DE
P 12
Consolidation Machine Technologies for Tailored Composite BlanksA. Wendt*, T. Weiler, M. EmontsAachener Zentrum für integrativen Leichtbau, Aachen, DE
P 13
Scientific Data Management in Materials sciences – Data Models and User Interactions for Fibre-reinforced PlasticsJ. Hesselbach, A.S. HerrmannFaserinstitut Bremen e.V., Bremen, DES. Putze, R. Porzel, R. Malaka, S. Wellsandt, K.-D. ThobenUniversität Bremen, Bremen, DEK. Burkart, H.-W. ZochLeibniz Institut für Werkstofforientierte Technologien, Bremen, DE
Poster Session 10:30 – 12:00 (Foyer Hall 4.1)
P 02
Advances in Fiber Distribution Analysis of Injection Molded Parts Using Direct Fiber SimulationK. Sakon, K. Ikeda, S. Kobayashi, R. OkabeMitsubishi Heavy Industries, LTD., Nagoya-shi, JP
P 03
StyLight® – Class-A Surface with Thermoplastic CompositesP. Juan, K. Suhre INEOS Styrolution, Frankfurt am Main, DET. Braselmann, Neue Materialien Fürth GmbH, Fürth, DEJ. Knöchel, Neue Materialien Bayreuth GmbH, Bayreuth, DE
P 04
Process Monitoring of the In-mould Polymerisation of a Thermoplastic Composite Through the Use of an Advanced Sensor SystemN. Pantelelis, Synthesites, Piraeus, GreeceP. Gerard, Arkema, Lacq, FR
P 05
Lightweight Rivet Fastening of Carbon Fiber Reinforced Thermoplastic Composites Using Servo Press UnitD. Tanabe*, National Institute of Technology, Gobo-shi, JPT. Eguchi, T. Mimura, T. HidaDai-Ichi Dentsu Ltd., Kani-shi, JPK. Nishiyabu, Kindai University, Higashiosaka-shi, JP
P 06
Study of the Effect of Loading a Thermoplastic Matrix with Graphene OxideL. Lima, University of Aveiro, Santiago de Riba-Ul, Oliveira de Azeméis, PT, and CICECO Aveiro Institute of Materials, Aveiro, PTT. Trindade, University of Aveiro, Aveiro, PT, and CICECO Aveiro Institute of Materials, Aveiro, PTJ. Oliveira, University of Aveiro, Santiago de Riba-Ul, Oliveira de Azeméis, Portugal, and CICECO Aveiro Institute of Materials, Aveiro, Portugal
| 19 18Programme
31 October 2018
Poster Session 10:30 – 12:00 (Foyer Hall 4.1)
P 14
Parameter Optimization Through Design of Experiments for Laser-assisted Automated Fiber Placement ProcessesP. Dreher, A. Chadwick, G. DollDLR e. V., Stuttgart, DE
P 15
VICTREX AE-250 – A Novel Polyaryletherketone Polymer Suited to Automated Tape Placement and Out of Autoclave ProcessingS. Green, Victrex plc, Thornton Cleveleys, UKM. Sullivan, Victrex, West Conshohocken, US
P 16
In-situ Automated Fiber Placement of Thermoplastic Composite Aerospace StructuresD. Hauber, J. MichasiowAutomated Dynamics, Niskayuna, US
P 17
Continuous Welding Technology of CF/PPS Composites Using High Frequency Induction HeatingD. Tanabe, National Institute of Technology, Gobo-shi, JPK. Kurima*, Kindai University, Higashiosaka-shi, JPT. Fukuda, C. KidoPearl Kogyo Co., Ltd., Osaka-shi, JPK. Nishiyabu, Kindai University Higashiosaka-shi, JP
P 18
Quality Assured UD Tape Production Enables Digital Linking with Downstream ProcessesC. Hopmann, E. Wilms*, C. Beste, K. Fischer RWTH Aachen, Aachen, DE
P 19
Adhesive-bonded Multiaxial Non-crimp Fabrics with Adjustable Draping PropertiesJ. Steinberg, S. Rittner, C. Cherif Technische Universität Dresden, Dresden, DE
P 21
Carbon Fiber Meets Polypropylene – Improving Performance and Compatibility for Composite SolutionsC. Karatzias, Mitsui Chemicals Europe GmbH, Düsseldorf, DE
P 22
Industrialisation of Thermoplastic Composite Overmoulding via Simulation, Structural Performance and Manufacturing DevelopmentN. Chapman, S. Cooper, M. Herath, T. Wu, P. GiddingsNational Composites Centre, Bristol, UK
REINFORCE YOUR BUSINESS WITH TPRC
www.thermoplastic-composites.com | [email protected]
ADVANCING THERMOPLASTIC COMPOSITE TECHNOLOGY
TPRC provides models and tools based on the required thorough understanding of thermoplastic composite materials and processes to optimize existing and new manufacturing processes in terms of quality and productivity. The R&D results enable viable use of thermoplastic composites by eliminating technological barriers which are identified together with the TPRC member companies and universities.
Being a member of TPRC will give you access to the cutting edge research, the state-of-the-art laboratory and the TPRC expert network with 20+ years of experience in researching and developing thermoplastic composite applications.
Additionally, TPRC is well positioned to provide needed training and education. A professional knowledge transfer is promoted via interactive courses on introduction or advanced level. Visit us during ITHEC 2018!
| 21 20The Conference
Parking space during ITHEC only available in the car park
North exit
Access for participants/visitors
Access for exhibitors during set upAccess to car park
Gate D
Main Stationsouth exit: City
Congress Center Bremen
VESTAPE® UD tapes –When unrivaled performance is the only option!
Thermoplastic UD-Tapes with PEEK or PA12 combined with carbon fi bers is the high performing solution to turn to for applications where weakness is simply not acceptable. Whether in pipes for the Oil & Gas industry or structural parts for Aircraft , you can depend on VESTAPE® to hold fi rmly and reliably against all forces. With low water ab-sorption and impressive mechanical properties, it is the choice to rely on for the ultimate in bonding strength.
For more information please contact [email protected] www.evonik.com/composites
rz anz VESTAPE ITHEC.indd 1 18.06.18 16:06
ITHEC 2018, 4th International Conference and Exhibition on Thermoplastic Composites, will take place in Bremen, Germany, on 30 – 31 October 2018.
ITHEC is a unique expert conference focusing on structural fibre reinforced lightweight constructions. The two day event covers the latest developments in high performance thermo-plastic composite applications in aerospace, automotive and energy applications, as well as transport & engineering.
The invitation to attend ITHEC is directed at executives and researchers from industry (providers of raw materials for composite components, providers of manufacturing equipment, component manufacturers, end users) as well as institutes and universities in charge of these topics who are interested in an intensive exchange on the achievements in the industrial sector and the transfer of R&D results into industrial products.
ITHEC Conference focuses on new results on• Thermoplastic Composite Lightweight Structures
• Manufacturing & Process Technologies
• Simulation & Modelling
• Raw Materials & Standardisation
• Process Automation & Production Machinery
• Process Monitoring / Material Quality & Testing
• Eco Balance & Recycling
ITHEC is the premium event to meet the leading international specialists, to share their expertise and to strengthen the business cooperations. About 400 attendees will gather to discuss the current results presented in oral sessions and an additional poster session.
| 23 22The Conference
Conference Fees
Two-day ticket (early bird discount) 665 €*Registration until 31 August 2018
Two-day ticket 740 €*Registration from 1 September 2018
One-day ticket 460 €*no early bird discount available
Reduced fee for students (listeners only) 67 €*including Proceedings on USB card and refreshments, but without lunches(registration to be accompanied by student ID)
Reduced fee for one author of a paper 460 €*
Conference fee for exhibitors incl.One representative for freetwo tickets for freeare available if stand size is 12 m² or more
Printed version 35 €of conference proceedings, if ordered (plus 7 % VAT)by 31 August 2018 together with a conference registration
Conference dinner at Bremer Ratskeller 67 €*(30 October 2018)
*(Prices plus 19 % VAT)
The conference fee includes a digital version of theconference proceedings, the entry to the exhibition,lunches and refreshments.
The official conference language is Englishthere will be no simultaneous translation.
Please make use of the online registration facilitieson www.ithec.dePlease note: early bird discount is available until31 August 2018. From 19 October 2018, registration is only possible on-site.
The accompanying International Exhibition on Thermo-plastic Composites will present new lightweight concepts, material trends, innovative processing technologies and related inspection methods for thermoplastic composites.
New results and services in the fields of • Raw Materials
• Textiles & Fibre Technologies
• Semi-Finished Products
• Production Technologies & Machinery
• Simulation & Modelling Tools
• Composite Structures
• Joining Technologies
• Process Monitoring & Quality Control
• Materials Testing
Related to areas such as • Aerospace & Civil Aviation
• Automotive Vehicles
• Oil & Gas
• Wind Energy
• Transport & Engineering
Rental Fees(exhibition space only, minimum rental space 6 m²)
Row stand (1 side open) 220 € / m²Corner stand (2 sides open) 230 € / m²Head stand (3 sides open) 250 € / m² (All prices plus 19 % VAT)
Pre-fabricated rental stands are available. In case of inter-est please contact the organiser for detailed information.
Opening Hours of the ExhibitionTuesday, 30 October 2018 9:00 – 18:00Wednesday, 31 October 2018 9:00 – 17:00
The exhibition will take place at the Exhibition Hall 4.1. close to the lecture halls. Exhibitors and visitors will find an excellent environment for networking.
The Exhibition
| 25 24List of Exhibitors
(updated 10 August 2018)
• 9T Labs, Zürich, CH
• ASANO LABORATORIES CO., LTD, Aichi, JP
• Automated Dynamics, Niskayuna, US
• Barrday Composite Solutions, Millburry, US
• Boikon B.V., Leek, NL
• Carbon Fibre Recycle Industry Co. Ltd., Gifu-shi, JP
• Cetex Institut für Textil- und Verarbeitungs- maschinen gemeinnützige GmbH, Chemnitz, DE
• CompositesWorld / Gardner Business Media, Inc., Cincinnati, US
• Dai-ichi Dentsu Ltd., Kani-shi, JP
• DAIDO KOGYO Co., LTD., Kaga-shi, JP
• DLR e. V. / German Aerospace Center / Institut für Bauweisen und Strukturtechnologie, Stuttgart, DE
• Dutch Thermoplastic Components BV, Almere, NL
• EcoMaT – Center for Eco-efficient Materials & Technologies, Bremen, DE
• ENGEL Austria GmbH, Schwertberg, AU
• ETH Zürich, Lab. für Composite Materialien und Adaptive Strukturen, Zürich, CH
• Evonik Ressource Efficiency GmbH, Marl, DE
• Faserinstitut Bremen e. V., Bremen, DE
• Gustav Grolman GmbH & Co. KG, Neuss, DE
• INEOS Styrolution Europe GmbH, Frankfurt, DE
• JEC Group, Paris, FR
• Kajirene Inc., Kohaku-shi, JP
• Kanazawa Institute of Technology / ICC, Hakusan-shi, JP
• KraussMaffei Technologies GmbH, München, DE
• Kunststoffwerk AG Buchs, Buchs, CH
• KvE Composites Group, The Hague, NL
• LANGZAUNER Ges.m.b.H., Lambrechten, AU
• Laser Zentrum Hannover e. V., Hannover, DE
• lightweightdesign / Springer Fachmedien Wiesbaden GmbH, Wiesbaden, DE
• IRT Saint Exupéry, Toulouse, FR
• MARU HACHI Corp., Sakai-shi, JP
• Mitsui Chemicals Europe GmbH, Düsseldorf, DE
• MM MaschinenMarkt / Vogel Business Media GmbH & Co. KG, Würzburg, DE
• Pinette Emidecau Industries, Chalôn-sur-Saône, FR
• Reinforced Plastics / Elsevier Ltd., Oxford, UK
• SAMPE Europe, Oerlingen, CH
• Suncorona Oda Co., Ltd., Sumatsu-shi, JP
• Suprem SA, Yverdon-les-Bains, CH
• Technische Universität Chemnitz / MERGE, Chemnitz, DE
• Teijin Carbon Europe GmbH, Wuppertal, DE
• TenCate Advanced Composites, Nijverdal, NL
• TPRC, Enschede, NL
• Tsudakoma Corp., Kanazawa-shi, JP
• Victrex Europa GmbH, Hofheim am Taunus, DE
• Web Industries, Marlborough, US
• Wickert Maschinenbau GmbH, Landau, DE
• YUHO Co. Ltd., Oksaka-shi, JP
| 27 26JEC Best Paper Award Notes
JEC Best Paper Award
For the first time, the Programme Committee will select the best manuscript submitted for ITHEC 2018 in close cooperation with our media partner JEC Group, Paris. The ceremony will be held in the Hanse Saal of the Congress Center Bremen on 30 October 2018 at 17:30. The award will include a publication of the selected manuscript in the JEC COMPOSITES MAGAZINE. All delegates are invited to join this ceremony.
Organiser / Contact
MESSE BREMENM3B GmbHFindorffstraße 101 | 28215 Bremen | GermanyT + 49 (0) 421 35 05 5 45F + 49 (0) 421 35 05 155 [email protected] | www.ithec.de
In cooperation withFaserinstitut Bremen e. V. (FIBRE), Germany
The organiser would like to thank all the sponsors and media partners!
Des
ign:
Bür
o 7,
Bre
men
, Ger
man
y · P
hoto
: ME
SSE
BR
EMEN
/ Jan
Rad
ke, B
rem
er T
ouri
stik
-Zen
tral
e, B
rem
en, G
erm
any
Platinum Sponsor
Gold Sponsors
Non-Financial Sponsors
Event Sponsors
Silver Sponsor
Media Partners
THERMOPLASTIC COMPOSITES RESEARCH CENTER
KVINDUSTRIEVEREINIGUNGVERSTÄRKTE KUNSTSTOFFEF E D E R A T I O N O F R E I N F O R C E D P L A S T I C S
