John Have Jensen ©Mercantec 2013
Configuring Active Directory Sites In this guide we will create site 1 and site 2 in Active Directory Sites and Services and make use of service
localization.
John Have Jensen ©Mercantec 2013
Configuring Active Directory Sites and Services
John Have Jensen ©Mercantec 2013
Right click and rename the site Default-First-Site-Name to Site1
John Have Jensen ©Mercantec 2013
John Have Jensen ©Mercantec 2013
Right click on sites and choose new site
John Have Jensen ©Mercantec 2013
John Have Jensen ©Mercantec 2013
Right click on subnets and choose New subnet….
John Have Jensen ©Mercantec 2013
Type the network address for the site 1 subnet and select the site 1 object.
John Have Jensen ©Mercantec 2013
Combine in the same way site 2 with the site 2 subnet.
John Have Jensen ©Mercantec 2013
It must look like this.
Configuring site replication We will configure site replication to occur every 15. minutes.
John Have Jensen ©Mercantec 2013
Right click DEFAULTIPSITELINK and choose Properties
John Have Jensen ©Mercantec 2013
![Installing and Configuring Active Directory (v2[1].10.14)](https://static.documents.pub/doc/80x56/577d2e081a28ab4e1eaea330/installing-and-configuring-active-directory-v211014.jpg)
