PET Compressed Air SolutionsC O N S T A N T I N N O V A T I O N

Solutions of ChoiceAn era of choice begins. Ingersoll-Rand introduces creativesolutions to the production challenges of PET bottle blowing.

For the first time, you can choose between different, highlyadvanced air compression technologies — which now include theoutstanding performance of four-stage centrifugal andreciprocating compressors — to select that which best meets theunique production requirements of your plant.

The reasoning is straightforward. To compete successfully in theglobal marketplace, companies like yours must keep productionlines running smoothly and with minimum interruption.Downtime, whether scheduled or unscheduled, is costly.

So, with a thorough understanding of the dynamics in today’sstrenuous production environment, Ingersoll-Rand unveilsground-breaking 4-stage centrifugal technology and 4-stagereciprocating technology, for unmatched reliability andperformance. Together with our other highly regardedreciprocating solutions, these superior technologies from a singlesource provider offer the PBM Industry:

• Lower life-cycle cost• Unmatched product durability• Ability to thrive in punishing environments• Economical and efficient solutions to maximize productivity• Numerous configurations to meet any operational need

Take the vital first step in choosing the right solution. CallIngersoll-Rand. Our thoroughly trained staff is ready to help youevaluate your air system to determine your compressed air needs.

Ingersoll-Rand has broken the rules!We are the only manufacturer that

offers PET customers centrifugalcompressor technology. This state-

of-the-art compressor offers thehighest reliability of any compressor

in its class.

Ingersoll-Rand PET Solutions offercustomers not only reliability, efficiencyand productivity, but the lowest life-cyclecost of ownership, as well.

Ingersoll-Rand offers a full range ofsuperior 4-stage compressor technology.What does this mean to our customers?

Highest energy efficiency.

2

Take a Different Path

Ingersoll-Rand understands thatcompressed air means system not just

compressor. That is why we are the onlymanufacturer in the PET industry that

offers total care solutions.

3

4

State-of-the-Art ReliabilitySeveral years ago we embarked on an ambitious quest toprovide the most reliable air compressor solution availableto the PBM industry. We achieved our goal with theintroduction of the Centac C750. Specifically designed fordemanding PBM applications, the C750 has few movingparts and virtually nothing to wear out. Valve, ring andpacking changes become a thing of the past. Centaccompressors, by design, will run for long intervals — andsince they stay running, you keep producing. Featuring anon-contact compression cycle, the C750 offersunsurpassed air quality, oil-free, with no particles inducedinto the air stream. Experience legendary reliability and thepeace of mind it brings with the new Centac C750 solution.

Compressor Nominal Capacity Pressure Dimensions mm WeightModel Stages kW m3/h Bar L W H kgC750-C50MX4 4 600 3210 42 4390 2570 1880 9545C750-C60MX4 4 700 3630 42 4390 2570 1880 10000

*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20°C

SPECIFICATIONS

BENEFITS• Simplicity by design — four main rotating

parts

• 100% oil-free non-contact compressioncycle, no particles generated during thecompression process

• Four-stage from atmosphere design foroptimal efficiency

• Ultra compact footprint with no vibrationor unbalanced forces to contain

• Low installation cost single point air andwater connections

• Stainless steel interconnect piping withstandard flange fittings

• Gear-driven main oil pump ensureslubrication during coast down

• Mounted and piped no-loss stylecondensate removal traps standard on allmodels

• Anti-corrosion protection standard on allinternal passages

• Ingersoll Rand’s advanced CMC®

microprocessor-based controller monitorsall critical system parameters in real time

• Intercoolers and aftercoolers designed for6°C approach temperature

• On-screen start up and basic maintenanceinstructions simplify operation

• Ambient and parallel valve control logic

• Standard constant pressure or auto-dualcontrol modes

• All components constructed in accordancewith World Standards and stamped asapplicable

• Complete factory load tested package

• System matched components carefullychosen to ensure superior performance

• 85 dBA sound level (measured in free fieldcondition with standard ODP motor)

Centac C750 Model C60MX4

C750

5

Four-Stage Atmospheric When unsurpassed performance and reliability are required, thePETStar-4 line of 4-Stage Reciprocating Air Compressors answers thechallenge. Robustly designed and configured in a horizontally opposedcylinder configuration, the PETStar-4 arrangement virtually eliminatesvibration with a minimal foundation requirement. By utilizing fourstages of compression, the PETStar-4 is capable of providingunsurpassed compressor efficiency. Lower stage compression ratiosreduce the cylinder operating temperatures and extend the life of valves,rings, and packing. To simplify installation, all PETStar-4 units feature aheavy-duty welded steel sub-base and are available with a matching airtreatment component package. Whether you require a compressor forin-line molding or capacity to support a large production operation,there is a PETStar-4 package to meet your needs.

Compressor Nominal Capacity Pressure Dimensions cm WeightModel Stages kW m3/h Bar L W H kgPS-4 1500 4 250 1525 40 665 292 292 21500PS-4 1700 4 315 1724 40 665 229 292 21800PS-4 1900 4 315 1920 40 665 229 292 22000PS-4 2100 4 355 2140 40 665 229 292 22200PS-4 2300 4 400 2353 40 685 229 302 22650PS-4 2500 4 450 2549 40 685 229 302 23000PS-4 2800 4 500 2846 40 685 229 302 23200PS-4 3000 4 500 3042 40 685 229 302 23300PS-4 3300 4 560 3361 40 685 229 302 23900

*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20° C

SPECIFICATIONS

BENEFITS• Non-lubricated 100% oil-free, water

cooled design

• Four-stage balanced opposed layouteliminates unwanted vibration

• All double acting, heavy-duty class-40 castiron cylinder construction

• Sleeve type main and connecting rodbearings

• Enduralife 16,000 hour rated piston ringsand packing

• Anti-corrosion coating on all system airpiping

• Crankshaft driven main oil pump

• Electrical driven pre-lubrication system

• Large cast-in water jackets fordimensional stability under extremeconditions

• Conservatively designed valves selected toprovide extra long-life

• Lowest interstage temperatures andpressures

• Intecoolers / aftercooler selected foroptimal 9ºC approach temperature

• Distance pieces feature two compartmentsensuring lubricant is isolated fromcylinders

• Three-step capacity control 0-50-100%

• Advanced CMC main compressorcontroller with 1,000 event loggingcapability built-in

• IP-55 TEFC, 6-pole main drive motor

• Star-delta main motor starter

• All components constructed in accordancewith world standards and stamped asapplicable

• Available in Basic or Intermediate packageconfiguration with optional piped andmounted dryer and receiver

• Available rod drop position wear indicators

PETStar-4 Model 3300

EnduraLIFENow available with

components

4

6

Total System FlexibilityLarge bottle production operations often consume great quantities ofhigh-pressure and low-pressure air. For certain customers, who chooseto invest in a modular system, IR can provide a primary compressoraugmented by a booster. An advantage of this configuration is that itallows for independent addition of capacity to each circuit. The primarycompressor can be chosen from a wide range of oil-free rotary orcentrifugal compressor designs, which require minimal maintenance. A two-stage non-lubricated reciprocating compressor serves as the booster.

BENEFITS• Multiple stages of compression improve

efficiency and extend compressor life bymaintaining lower operating temperatures

• The primary compressor and balancedopposed booster require a minimumfoundation

• System capacity can be addedindependently to each circuit allowing formodular expansion

• Over-sizing the primary compressor is anefficient method of providing lowpressure, oil-free air for plant use

• Centrifugal compressors, with few movingcomponents, require minimummaintenance and replacement parts,significantly reducing maintenance costs

• The reciprocating booster, by design,requires significantly less valves than thatof an atmospheric compressor, resulting inlower maintenance costs

• Standard low pressure dryer allows for dryplant air and eliminates possible freeze-ups due to high-pressure condensateremoval

• Primary and booster can be sized tooptimize the plant air system. When anexpansion of low or high pressure air isneeded, additional air can be added inthat circuit

• All compressors, including boosters,tested at 100% full operating pressure

Centac CV2

Oil-free primary air compressor

Low pressure receiver

Two-stage booster High pressure receiver

Low pressureair dryer

Low pressureplant air High pressure

air

Two-Stage Reciprocating Booster

Primary Booster Systems

7

Tradition is something we take seriously at Ingersoll-Rand, and it isdeveloped in our products through constant refinement. The latestPETStar-3 Inline compressors carry on that rich heritage. Redesignedwith state-of-the-art materials and technologies, PETStars are ruggedunits that offer exceptional value to our customers, based onimproved operating life, low maintenance, and high efficiency. Built forlong life, each package is shipped on a rugged steel sub-base, to beeasily installed on any standard concrete floor. Single point air, waterand electrical connections further aid quick installation. A legend fromthe beginning, and refined over the years, there is a PETStar packageto fit your needs.

BENEFITS• Three-stage balanced opposed layout

minimizes foundation requirements

• All double acting stages (780-1540)

• Rugged frame design — one-piece castiron construction

• Non-lubricated, featuring long life (8,000hr) self-lubricating composite wearingcomponents

• Cylinders constructed with large cast-inwater jackets for dimensional stabilityunder continuous operation

• Intercoolers/aftercooler selected foroptimal 8°C (15°F) approach temperature

• All internal components and piping arecorrosion protected for extended life

• Distance pieces feature two compartmentsensuring the lubricant is isolated from thecylinders

• Advanced Intellisys®SG microprocessor-based controller monitors all criticalsystem parameters in real time

• All components constructed in accordancewith World Standards and stamped asapplicable

• All compressor packages load tested at100% operating pressure

Compressor Nominal Capacity Pressure Dimensions mm WeightModel Stages kW m3/h Bar L W H kg

PS-3i 420 3 75 425 40 4780 1980 2240 6140

PS-3i 630 3 110 639 40 4780 1980 2240 6140

PS-3i 710 3 132 712 40 4780 1980 2240 6140

PS-3i 780 3 132 778 40 5590 2210 2240 7250

PS-3i 850 3 150 848 40 5590 2210 2240 7250

PS-3i 1020 3 200 1016 40 5590 2210 2240 7250

PS-3i 1280 3 200 1278 40 6600 2590 2390 14910

PS-3i 1540 3 250 1545 40 6600 2590 2390 14910

*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20°C

SPECIFICATIONS

High pressure receiver

High pressureair dryer

High pressureair to system

Three-stage compressor

Aftercooler

PETStar-3 Inline Model 630

Balanced Three-Stage Atmospheric

3 Inline

8

Three-Stage Atmospheric PETStar-3 reciprocating compressors are designed to meet theneeds of customers with small rotary or inline blow moldingequipment. These customers require an economical andefficient solution to maximize productivity. Arranged in aspace-saving package, the PETStar-3 has single point air,water and electrical connections for easy installation. Themachine base is also designed with forklift access forconvenient transport. By utilizing a W configuration, access toall areas is made unobtrusive during maintenance operations.Equally robust in design and construction, the PETStar-3 istruly a cost effective solution.

BENEFITS• Non-lubricated, 100% oil-free

• Three-stage double-acting compressionW-layout

• Rugged frame design: one-piece cast ironconstruction

• Full floating, pressure lubricated sleeve-type main and connecting rod bearings

• Stainless steel interconnect piping, withSAE O-ring fittings

• State-of-the-art self-lubricating compositematerial used for piston, wear, andpacking rings

• Durable stainless steel plate valves

• Crankshaft-driven main oil pump

• Distance pieces feature twocompartments, ensuring the lubricant isisolated from the cylinders

• Large cast-in water jackets fordimensional stability under continuousoperation

• Intercoolers/aftercoolers selected foroptimal 8°C (15°F) approach temperature

• Advanced Intellisys‚ SG microprocessorbased controller monitors all criticalsystem parameters in real time

• Thermostatic water control valves, andsolenoid operated shut-off valve

• NEMA4 (IP-54) rated main motor starterand control panel

• Two-step capacity control, 0%-100%

• All components constructed in accordancewith World Standards and stamped asapplicable

• Single point air, water, and electricalconnections

Compressor Nominal Capacity Pressure Dimensions mm WeightModel Stages kW m3/h Bar L W H kg

PS-3 170 3 30 170 40 2290 1830 1660 3270

PS-3 210 3 37 216 40 2290 1830 1660 3345

PS-3 260 3 45 245 40 2290 1830 1660 3430

PS-3 310 3 55 287 40 2290 1830 1660 3510

*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20°C

SPECIFICATIONS

PETStar-3 Model 310

3

9

Continuous DutyThe Type-30 compressor is an Ingersoll-Rand legend. Thebasic design has been in service throughout the world formore than 75 years. Now newly redesigned and improvedas a continuous duty unit, the Type-30 is perfectly suitedfor intermittent blowing applications, such as single-stepinjection blow molding or small two-step reheat blowmolding processes. The Type-30 is available in single ordual base plate configurations. Our staff is ready to helpyou select the right unit to fit your needs.

BENEFITS• Heavy-duty two-stage air inlet

particulate filter

• Centrifugal unloader

• Low level oil switch

• Rugged one-piece fabricatedbaseplate

Compressor Nominal Capacity Pressure Max Dimensions mm WeightModel Stages kW m3/h Bar Bar L W H kgT30 7T2x10 3 7.5 36.5 35 35 1250 890 850 295T30 7T4x5 2 3.7 11.2 40 70 1250 890 850 341T30 15T2x10 2 7.5 39.1 40 70 1420 970 840 432T30 15T2x15 3 15 52.8 40 70 1420 970 840 432T30 15T2x15D 3 25 105.7 40 70 2860 1960 1700 523

*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20°C

SPECIFICATIONS

Type-30 Model 15T2

Type-30 Model 7T2

• Air-cooled aftercooler

• Fully adjustable pressure switch

• Pressure lubricated main andconnection rod bearings

• Mounted motor starter

• Continuous duty cycle

• 100% Cast iron construction

• 2 or 3 stages of compression available with maximum pressure rating up to 68 bar

• NEMA rated starter with hour meter

• Single point air and electrical connections

Type-30

10

Value-Packed SolutionThe high pressure dryer is a vitally important link in the supply ofclean dry air to the blow molding process. During air compression,the compressor concentrates contaminants in the form of watervapor and airborne particles. These contaminants can damage theinternal components of the molding equipment. Our refrigerationdryers have been specially designed to exceed the requirements ofdemanding PBM applications. As compact space saving units, theyare built to exceed the strict international standard of ISO 8573.1class 4 governing pressure dew-point. The HPS series will providemany years of trouble-free operation.

Compressor Air-Cooled Water-Cooled Nominal MAWP Dimensions mm WeightModel Nm3/h Nm3/h kW Bar L W H kgHPS 300 520 590 1.1 50 810 970 1090 168HPS 500 860 990 2.0 50 810 970 1090 172HPS 750 1290 1480 2.4 50 1120 970 1090 211HPS 1000 1720 1980 3.7 50 1120 970 1090 218HPS 1250 2150 2470 5.3 50 1120 970 1090 268HPS 1750 3000 3460 7.7 50 1270 1220 1270 465HPS 2000 3430 3950 9.8 50 1270 1220 1520 590HPS 3000 5150 5920 14.1 50 1270 1220 1520 710HPS 3750 6440 7400 16.5 50 1270 1220 1520 719

Flow and pressure drop at MAWP (Maximum Allowable Working Pressure) and at 60 Hz, 38°C.38°C inlet and 38°C ambient temperature.Dimensions and weights are for reference only, please refers to the installation, and construction manual for detailed information.MAWP is given at 38°C inlet, and 38°C ambient temperature. Correction factor for 50 Hz operation - .83

SPECIFICATIONS

BENEFITS• Ultra compact, plate style heat exchangers

constructed of 100% stainless steel

• Environmentally friendly HFC refrigerantsR134a (HPS 300 – 1000), R-404a (HPS 1250 – 3750)

• 3°C stable dew point

• Integrated filter/separator with cyclonicaction for superior moisture removal

• Non-cycling, reliable reciprocating andscroll compressors

• Integral hot gas bypass valve

• Electronically programmable solenoiddrain valve

• Meets ASME, CE, CSA, UL, and CRNcertification

• Auxiliary dryer/compressor interlock toensure dryer is operational beforecompressor loads

• Available in both air-cooled or watercooled configurations

• System pressure gauge

• Inlet pressure gauge

• Suction pressure gauge

• On/off switch

• Power on indicator

• System operating

• High evaporation temperature

• Compressor fault alarm

IR Model HPS 3000

HPS Series Refrigerated Dryer

11

High Pressure AccessoriesProperly sized storage is crucial to realizing the maximumperformance of your compressed air investment. Often critical inthe operation and reliability of a system, stored compressed airprovides the capacitance necessary for the system to react todemands from the production floor. Additional sufficient storageprovides a buffer to enable the controls from rapid cycling of yourcompressors. Ingersoll-Rand long has recognized the need forproperly sizing the air storage system. Our experts will help you inidentifying your storage requirements. Receivers are available insizes ranging from 120 gallon through 5,000 gallon and withratings of 125, 150, 300, 550 and 725 Maximum AllowableWorking Pressure.

General Purpose High Efficiency MAWP Capacity Connection Dimensions mm WeightModel Micron Model Micron Bar m3/h Size L W kgHPGP 800 1 HPHE 800 0.01 61 1,360 1”NPT 380 130 6HPGP 2000 1 HPHE 2000 0.01 61 3,400 1”NPT 610 100 11HPGP 4000 1 HPHE 4000 0.01 48 6,800 3”NPT 1040 250 67

*Dimensions and weights are for reference only. Please request certified drawings for installation purposes.

SPECIFICATIONS

BENEFITS• Increased reactance time decreases short cycling

of your compressed air system

• Provides a pulsation buffer between down streamequipment and the compressed air source

• All components constructed in accordance withWorld Standards and stamped as applicable

• Internal corrosion protection to maintain maximumperformance over service life

Ingersoll-Rand also offers avariety of high-pressure filtersto meet any requirement.

Vertical Air Receiver

40 Bar Filters and Storage

12

Intellisys SG

Anticipating Your System Control NeedsWhether it’s local compressor controls or system wide configurations. Ingersoll-Rand has solutions that save. We save in three ways:

CMC MicrocontrollerThe CMC is the most advanced microcontroller for aircompressors available in the marketplace today. It is standardon all Centac products and optional on the PetStar 4 productline. It utilizes a large graphical screen for viewing largeamounts of data at once. Other features of this state-of-the-artcontroller include:

• LCD membrane touch pad• Different language capabilities for user friendly interface• Real time system diagnostics and troubleshooting• Event logging for up to 1008 events• MODBUS protocol with communications card• RS-232 and 422 interface capabilities• Active security protection• Retrofits available

Intellisys SG The Intellisys SG is IR’s basic microprocessor and is standardon most PetStar models. The easy to read LCD display allowson the fly adjustments to be made quickly and easily. Othercapabilities of this controller include:• Interstage temperature and pressure monitoring• Real time system diagnostics and troubleshooting• Comprehensive data display• RS-232 interface capabilities• Security protection• Retrofits available

1Reliability Savings IR controls will improve youroperations process. Adependable product air systemmeans a dependable productto your customers.

2 Energy Savings IR controls reduce wasted airat the compressor and atsystem levels. Controlsreduce air pressure andincrease throttle range toconserve air and energy.

3 Maintenance SavingsPreventative maintenancefeatures in both compressorand system will help warn usbefore physical symptomsarise.

CMC Microcontroller

Controls Systems

13

Air System Manager

Intellisys Energy Optimizer The Intellisys Energy Optimizer is a microprocessor based controller designed tominimize operational pressure. By tightening the control band, excess pressureis eliminated and energy is conserved. The IEO will also determine the precisenumber of compressors required to supply system pressure and floweliminating wasted power. When the compressors are not in demand the IEOshuts them down. Other capabilities include:• Large graphical user interface• Optional dewpoint monitoring• System pressure band control• Built-in sequencer for up to eight machines• RS-232, 422 interface capabilities

Air System Controller IR’s Air System Controller ASC, is a computer-based controller designed tominimize operational pressure. The ASC integrates all your compressed airneeds into one control package. The primary goal of the ASC is to monitor andcontrol your compressed air system and optimize its operation. Features include:• Integration of complete compressed air system• Energy management through load sharing• Remote communications through network monitoring/

real time data check • Remote notification of equipment alarm or trip status option• Report generator with event log and date and time stamp• Object oriented graphics and dynamic icons• Intranet, internet and LAN capable

Air System Manager The Air System Manager ASM, is IR’s most powerful computer-based controller.It is designed to incorporate all compressed air equipment, including ancillaryequipment, regardless of make. Based on Wonderware/Intellutions software, aunique solution can be custom configured to meet the needs of the productionenvironment. Additional capabilities include:• Integration of complete compressed air system including auxiliary equipment

such as dryers, chillers, cooling towers, etc• Energy management through load sharing• Remote communications through network monitoring/

real time data check• Remote notification of equipment alarm or trip status option• Report generator with event log and date and time stamp• Object oriented graphics and dynamic icons• Intranet, internet and LAN• Custom software applications

Air System Controller

Intellisys Energy Optimizer

14

Ingersoll-Rand Audit Solutions

FEASIBILITY STUDY:

� Analysis by walkingaround

� Interview operations,finance, management

� Identify potentialopportunities from asupply-side audit or fullsystem audit

SUPPLY-SIDE AUDIT:

� Differentials, signals andset points management

� Pressure dropmanagement yieldssignificant energy savings

� Air quality managementresults in significantproductivityimprovements

FULL SYSTEM AUDIT:

� All audit componentspreviously identified,plus...

� An exact match ofoptimal demand-siderequirements to minimumcompressed airconsumption

PRODUCTIVITY

EFFICIENCY

RELIABILITY

PRODUCTIVITY

EFFICIENCY

RELIABILITY

Customer Needs

SA

FS

SA

FS

FAFA

STARTING POINT

FSFS

SASA

FAFA

In the past you asked us to build thebest-engineered most reliable, energy-efficient air compressors in the industry.

But in today’s global business climate,you need more than great equipment tosurvive and thrive. Increasing value forour customers means we must gobeyond the components of an airsystem and find solutions to theoperating issues every customer faces.

The problems associated withoperating a modern compressed airsystem are fairly complex. At the sametime, many companies have cut backthe internal resources dedicated todefining and solving those problems.

That’s where IR Audit Solutions canhelp. Audit Solutions addresses thetotal process of producing compressedair — not just the compressors. It’s

about taking compressed air, looking atit as your fourth utility, and makingcompressed air as stable andconsistent as your other utilities.

The BenefitsYou can’t manage what you don’tmeasure. Knowing what your system isdoing is the first step in reducing costsand improving productivity.

Audits and AirCare Service

15

Our Service Pledge to You

AirCareAirCare, an Ingersoll-Rand exclusive, isa responsive and flexible contractmaintenance program custom-designedto provide customers with factoryauthorized scheduled maintenance forincreased system reliability. AirCarehelps eliminate unscheduled downtimeand relieves customers of the costlyinvestment in monitoring equipment,ongoing training and a thoroughknowledge of compressor technology.

The AirCare ProgramNo long-term maintenance program ismore comprehensive than AirCare. Thehighlights of the program include:

• Certified, professional technicianswill perform routine inspections anddiagnostic service

• Performance will be enhancedthrough exclusive use of genuine IRparts and lubricants

• All-inclusive fluid analysis programwill comprehensively monitor thelubricant in the compressor to detectproblems at the earliest possibleopportunity

• Vibration analysis diagnosticspinpoint the need for componentreplacement through monitoring andtrend analysis that predicts theservice life of critical components

Remote Monitoring• An added option to AirCare is IR’s

Intelliguard remote monitoringfeature. This 24-hour-a-day, seven-days-a-week, surveillance of the aircompressor installation helps identifypotential problems at an early stageand prevent unexpected repairs.

IR’s Audit Solutions can give your plant these critical benefits:

Reduce Operating Costs• Operating costs can be reduced by

up to half of the current costs.• Reductions in energy, maintenance,

water and rentals will feed yourbottom line.

Improve Productivity• Stabilize air pressure under all

conditions at all points-of-use.Adding compressors isn’t the onlyway to increase pressure at a point-of-use.

• Eliminate moisture, oil orcontamination problems, whetherthe root cause is the equipment orthe application.

• Compressed air might be“invisible,” but that doesn’t mean itcan’t be the cause of processproblems when improperly applied.

Minimize or Eliminate FutureCapital Expenditures• Turning off a compressor or

reducing the load can create a backup machine out of your existingcompressors. If your system is onthe brink of expansion, an audit canhelp you squeeze more out of yourexisting system, delaying the needto expand. If the expansion is large,the audit can help you “right-size”the components rather thanoversize the equipment “just incase.” This saves money on bothequipment and installation.

Ingersoll-Rand has earned a world-wide reputation for providing the finestcustomer service available from any manufacturer in its field. We recognize that ourcustomers count on the equipment we build and the services we provide to helpkeep their production processes running smoothly and without interruption —essential if they are to stay competitive in today’s business environment.

This is a trust that we do not take lightly.

Therefore, we pledge to you:

• Our parts and service network will respond to your needs 24 hours a day, 365 days a year. We will not let you down.

• If a problem develops, we will fix it fast and fix it right.

• We will stand behind the work we perform.

• No matter where in the world you are located, we will be there for you.

Proven Customer Savings.Online solutions: www.air.irco.com

© 02/2005 Ingersoll-Rand Company Form 99932170 Printed in Europe

Ingersoll-Rand CompanyHeavy Industrial Air Solutions800-B Beaty StreetDavidson, NC 28036

Ingersoll-Rand CompanyHeavy Industrial Air SolutionsStrada Provinciale Cassanese 10820060 Vignate, Milano, Italy

Ingersoll-Rand CompanyHeavy Industrial Air Solutions11F, Xu Hui Yuan Building1089 Zhong Shan Nan Er RoadShanghai, 200030, China, PRC

Ingersoll-Rand compressors are not designed, intended or approved for breathing air applications. Ingersoll-Rand does not approve specializedequipment for breathing air applications and assumes no responsibility or liability for compressors used for breathing air service.

Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein.Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll-Rand’s standard terms and conditions ofsale for such products, which are available upon request.

Product improvement is a continuing goal at Ingersoll-Rand. Designs and specifications are subject to change without notice or obligation.

Member of

www.cagi.org