Catalog # : Project :
Date :Prepared By :
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
ARRAFunding CompliantFeatures & Specifications
Optical System• State-of-the-Art one piece silicone optic sheet delivers industry leading
optical control with an integrated gasket to provide IP66 rated sealed opticalchamber in 1 component.
• Proprietary silicone refractor optics provide exceptional coverage anduniformity in IES Types 2, 3, 5W and FT.
• Silicone optical material does not yellow or crack with age and provides aminimum light transmittance of 93%.
• Optical distributions are field rotatable (in 90˚ increments).• Available in 5000K, 4000K, and 3000K (+/- 275K) color temperatures.• Minimum CRI of 70. Consult Factory for Higher CRI requirements.• Integral Louver (IL) option available for improved back-light control without
sacrificing street side performance. See page 4 for more details.
Electrical • High-performance driver features over-voltage, under-voltage, short-circuit
and over temperature protection.• 0-10V dimming (10% - 100%) standard.• Standard Universal Voltage (120-277 Vac) Input 50/60 Hz or optional High
Voltage (347-480 Vac).• L70 Calculated Life: >100k Hours (See Lumen Maintenance on Page 2)• Total harmonic distortion: <20%• Operating temperature: - -40°C to +50°C (-40°F to +122°F)• Power factor: >.90• Input power stays constant over life.• Field replaceable surge protection device meets a minimum Category C Low
operation (per ANSI/IEEE C62.41.2).• High-efficacy LEDs mounted to metal-core circuit board to maximize heat
dissipation• Terminal block provided accepts up to 10ga wire, however the luminaire is
supplied with a 32’ 3 conductor wire harness.• Components are fully encased in potting material for moisture resistance.
Driver complies with FCC standards. Driver and key electronic componentscan easily be accessed.
Constitution - XCN4
LED Decorative Pedestrian & Area Light
This latest iteration of the LED
Constitution decorative and pedestrian
area light features LSI’s innovative and
high-performance silicone optics, as
also featured in LSI’s ground-breaking,
patent-pending Mirada Series fixtures.
The Constitution is designed to
illuminate pathways, walkway areas
and campus sites. Its contemporary,
sleek design complements architectural
design elements well.
Product Dimensions
32-7/16”(823mm)
Ø25-1/2”(648mm)
21-7/8”(556mm)
Slipfitter fits 4ӯtenon or pole
13-7/16”(341mm)
4-7/16”(1131mm)
Post Top SingleSlipfits 4” Dia. Tenon (4N) or Pole
Ø4”(102mm)
4-13/16”(122mm)
24-5/8”(625mm)
3-5/16”(84mm)
Post Top with WM Accessory
37-1/4”(946mm)
12/14/17LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
PerformanceFeatures & Specifications (Cont.)Construction• Rugged die-cast aluminum housing.• Cast aluminum wiring access door located in lower hub/fitter.• Rigid die-cast aluminum arms for consistency and strength.• Precision die cast aluminum heatsink and optical frame.
• Removable spun aluminum cap/driver enclosure is retained by captive stain-less steel fasteners and safety cables. Housing and top cap interface is sealed with a one-piece extruded silicone gasket. Tool-less entry option is available.
• All exposed fasteners are black oxide coated stainless steel. Internal fastenersare stainless steel or zinc electroplated steel.
• Luminaire is proudly made in the U.S.• IP65 rated luminaire protects integral components from harsh environ-
ments.• 1.5G rated for ANSI C136.31 high vibration applications• Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing
process. The DuraGrip finish withstands extreme weather changes withoutcracking or peeling. Other standard LSI finishes available. Consult factory.
• Shipping weight: 45 lbs in carton.
Controls• Optional integral passive infrared motion and daylight sensor activates
switching of luminaire light levels (see page 5 for more details).• 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist
lock photocontrols or wireless control modules.• LSI’s Gold and Platinum wireless control system options reduce energy and
maintenance costs while optimizing light quality 24/7. (see page 5 for moredetails)
Installation• Mounts to 4” O.D. pole or tenon.• Secures to pole with 6 stainless steel set screws.• 32’ wire leads are provided bundled in the slip fitter hub for ease of wiring.
Warranty• LSI LED Fixtures carry a 5-year warranty.
Listings• Listed to UL 1598 and UL 8750.• RoHS Compliant.• State of California Title 24.• DesignLights Consortium® (DLC) qualified product. Not all versions of this
product may be DLC qualified. Please check the DLC Qualified Products Listat www.designlights.org/QPL to confirm which versions are qualified.
• American Recovery and Reinvestment Act Funding Compliant.• Lighting Facts Approved.• Suitable For wet Locations.• IP65 rated Luminaire. IP66 rated optical chamber.• 1.5G rated for ANSI C136.31 high vibration applications
RECOMMENDED LUMEN MAINTENANCE1
75 hr325 hr2 50 hr2
0 C
10 C
20 C
25 C
30 C
40 C
1.06
1.04
1.01
1.00
0.99
0.97
1.05
1.02
1.00
0.98
0.97
0.92
1.05
1.02
0.99
0.97
0.96
0.89
1.05
1.02
0.99
0.97
0.96
0.86
1.04
1.01
0.99
0.96
0.95
0.83
Initial2Ambient 100 hr3
ELECTRICAL DATA*347V120V 240V 277V
10L
18L
25L
0.63
1.29A
1.98A
0.36A
0.75A
1.14A
0.31A
0.65A
.99A
0.27A
0.56A
.86A
0.22A
0.45A
0.68A
0.16A
0.32A
0.49A
208VLumens
75
155
237
Watts480V
*Electrical data at 25C (77F). Actual wattage may differ by +/-10%.
1 - Lumen maintenance values at 25C are calculated per TM-21 based on LM-80 data and in-situ testing.2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time
durations that are within six times the IESNA LM-80-08 total test duration for the device under testing.
3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times the IESNA LM-80-08 total test duration for the device under testing.
PT
PT
1.0
2.0
LUMINAIRE EPA CHART - Constitution
MOUNTING STYLE EPA
PT Single
PT D180°with BK MPT BO (2)
Ø4” (102mm) or Ø5” (127mm)
24-1/2”(622mm)
Ø4”(102mm)
Post Top with BK MPT BO (x2)Mounts to 4” or 5” Dia. D180 Bolt-on Pole
(select 3” reduced drilling pattern)
3-5/16”(84mm)
Constitution - XCN4
LED Decorative Pedestrian & Area Light
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
PERFORMANCE
FT
3
5W
10L 8,879
9,312
9,066
8,921
16,620
17,475
17,042
17,241
22,583
23,660
23,217
22,687
118
124
121
119
107
113
110
111
95
100
98
96
128
134
130
128
114
122
119
120
103
108
106
103
128
136
131
130
117
122
121
120
104
109
107
105
75
75
75
75
155
155
155
155
237
237
237
237
2
FT
3
5W
2
FT
3
5W
2
Lumens Wattage
B3-U2-G3
B2-U2-G3
B3-U2-G3
B4-U2-G2
B3-U2-G3
B3-U2-G3
B4-U2-G2
B3-U2-G3
B4-U2-G3
B3-U2-G4
B3-U2-G4
B5-U2-G3
Efficacy BUGRating
DistributionType Delivered
Lumens
3000K 4000K 5000K
9,578
10,045
9,780
9,624
17,929
18,851
18,384
18,599
24,361
25,523
25,045
24,474
B3-U2-G3
B2-U2-G3
B3-U2-G3
B4-U2-G2
B4-U2-G4
B3-U2-G4
B3-U2-G4
B4-U2-G2
B4-U2-G3
B3-U2-G4
B3-U2-G4
B5-U2-G3
Efficacy BUGRating
DeliveredLumens
9,634
10,187
9,847
9,771
18,108
18,982
18,738
18,606
24,546
25,834
25,449
24,905
B3-U2-G3
B2-U2-G3
B3-U2-G3
B4-U2-G2
B4-U2-G4
B3-U2-G3
B3-U2-G4
B3-U2-G3
B4-U2-G3
B3-U2-G4
B3-U2-G4
B5-U2-G4
Efficacy BUGRating
DeliveredLumens
18L
25L
3 2 1 0
FT 5W Type 3 Type 2
1 2 3 3 2 1 0 1 2 3 3 2 1 0 1 2 3 3 2 1 0 1 2 3
3
2
1
0
1
2
3
3
2
1
0
1
2
3
3
2
1
0
1
2
3
3
2
1
0
1
2
3
Performance (Cont.)All published luminaire photometric testing performed to IESNA LM-79 standards by NVLAP, certified laboratory. ISO footcandle plots below demonstrate the Constitution (XCN4) light patterns only. Not for total fixture output. For complete specifications and IES files, see website.
Constitution - XCN4
LED Decorative Pedestrian & Area Light
12/14/17LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
Ordering Guide
Accessories/OptionsIntegral Louver (IL)Optional Integral Louver available for improved back-light control without sacrificing street side performance.
Fixture Shown with Integral Louver (IL)
7 Pin Photoelectric Control7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist
lock photocontrols or wireless control modules. Control accessories soldseparately. Dimming leads from the receptacle will be connected to thedriver dimming leads (Consult factory for alternate wiring).
Fixture Shown with PCR 7P
Constitution - XCN4
LED Decorative Pedestrian & Area Light
TYPICAL ORDER EXAMPLE:
LuminairePrefix Distribution
LightSource
ACCESSORY ORDERING INFORMATIONDescription Order Number Order Number
(Accessories are field installed)
LineVoltage Finish Options
OptionalControls
UE - Universal Voltage
(120-277v)
HV - High Voltage (347-480v)
BRZ - BronzeBLK - BlackGPT - GraphiteMSV - Metallic SilverWHT - WhitePLP - Platinum PlusSVG - Satin Verde
Green
Stand-Alone Control(Blank) - None
IMS - Integral Motion Sensor6
10L - 10,000 Lumens18L - 18,000 Lumens25L - 25,000 Lumens
LED2 - Type II3 - Type III5W - Type 5 WideFT - Forward
Throw (Type IV)
XCN4 - Constitution
PCR 7P - Photoelectric Control Receptacle1
IL - Integral Louver Shield TE - Tooless Access
XCN4 PT LED 18L 50 UE BRZ IMS
Lumens
50 - 5000K40 - 4000K30 - 3000K
Color Temp
BK MPT BO4 - Bolt on Bracket (for PT 180) For 4” O.D. Round Poles 490025CLR5
BK MPT BO5 - Bolt on Bracket (for PT 180) For 5” O.D. Round Poles 490035CLR5
IL - Integral Louver Shield (Black only) 654939PC120 Photocell for use with PCR option (120V) 122514 2,4
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 122515 2,4
PC347 Photocell for use with PCR option (347V) 122516 2,4
PC480 Photocell for use with PCR option (480V) 1225180 2,4
WM - Wall Mount Bracket (PT Only) C/F
Description
DFK208,240 Double Fusing (208V, 240V) DFK208, 240 3DFK480 Double Fusing (480V) DFK480 3FK347 Single Fusing (347V) FK347 3
FOOTNOTES:1 - Photocell must be ordered separately. See Accessories. 2 - Factory installed PCR option required. See Options. 3 - Fusing must be located in hand hole of pole.4 - These photocells provide Dusk/Dawn, on-off control only. Consult factory for alternate photocells providing additional functionality.
5 - Order poles with 3" reduced drilling pattern. For PT mounting configurations other than D180, consult factory. Order one bracket per fixture6 - Consists of a daylight & motion dual sensor. Light levels are field adjustable via a handheld remote configurator tool. Not available PCR 7P.
ALSC UNV TL5 - AirLink 5 Pin Twist Lock Controller 661409ALSC UNV TL7 - AirLink 7 Pin Twist Lock Controller 661410
FK120 Single Fusing (120V) FK120 3
FK277 Single Fusing (277V) FK277 3
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
ControlsOccupancy Sensor / Daylight Sensor (IMS)Optional integral passive infrared motion and daylight sensor activates switching of luminaire light levels. Standard Factory settings: High level light is activated and increased to full bright upon detection of motion. Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~5 minutes. Sensor has a detection cone of approxi-mately 45°, see coverage diagram. Optional configurator tool allows for easy and safe programming of each luminaire from the ground level.
SIDE VIEW
TOP VIEW
0
27ft
40ft50ft 50ft40ft 40ft30ft 30ft20ft 20ft10ft 10ft0
0
0
50ft
25ft
25ft
25ft 25ft50ft
100ft
Optional IMS Coverage Diagram
IMS/PC Remote Configurator Tool
Fixture Shown with IMS
Constitution - XCN4
LED Decorative Pedestrian & Area Light
IMS
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved. 10/03/17LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsi-industries.com • (513) 372-3200 • ©LSI Industries Inc. All Rights Reserved.
enabled by Synapse®
Wireless Lighting Controller 5 Pin & 7 Pin Twist LockThe 5 Pin Twist Lock Controller (TL5) & The 7 Pin Twist Lock Controller (TL7) are intelligent wireless lighting controllers with exceptional fault tolerance & a multitude of features. Each TL5 & TL7 provides intelligent On/Off switching, dimming, control, highly accurate power metering, status monitoring of your lighting fixtures & digital sensor input (TL7 only).
Features• Integrated Photocell
• ANSI C136.41 Dimming Receptacle Support
• Utility grade power monitoring
• Remote control and scheduling
• Flexible Dimming Controls
• Secure, over-the-air upgrades to support future enhancements
• Seamless integration into the AirLink Site Manager system
• Digital sensor input for motion sensing (TL7 only)
Power and Performance
• Operating environmental: -40°F to 158°F (-40°C to 70°C); 20% to 90%RH non-condensing; IP66
• Input power: 100–277 VAC +/- 10% (Max 305V)50/60 Hz
• Switched output: Default ON
• Load rating: 5A @ 100V to 277V (+/- 10%)
• Dimming control: 0–10V with short circuit protection
• Dimming output: maximum current 10mA
• Sensor input: One digital input that can be used formotion-based lighting controls (TL7 only)
• Power monitoring: Utility grade - 2% accuracy
• Power readings: Voltage, Watts
Other
• Dimensions: 4.53” W x 2.68” H (115mm W x 68mm H)
• Radio: SNAP 2.4 GHz; 802.15.4; +20 dBm Transmit Power;-104 dBm Receive Sensitivity
• Warranty: 5 years
Wiring
[email protected] (800) 436-7800 (support, option 8)
More informationFor more information on AirLink, visit our website at www.lsi-airlink.com/airlink
Contact LSI Controls
Load
Pin 3 - Digitalsensor input(not used forTL5)
Neut ral
Pin 4 reservedfor future use(not used forTL5)
Dimming
Dimming
Line
Li
Lo N