of 31
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
1/31
1
1.0 CONTENTS
TITLE PAGE NUMBER
Small Powered Plant 2 - 15
Machineries For Earthwork 16 - 24
Machineries For Transporting Work 25 - 28
Other Types Of Machineries 29 - 30
References 31
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
2/31
2
1.1 CONSTRUCTION PLANT AND MACHINERIES
Figure 1.1(a): Construction of Burj Khalifa
Man as the builder has sought to develop mechanical devices to facilitate his work in
adapting the earth to serve the needs and desires of mankind. From the crude construction
equipment utilized by ancient people has evolved the modern construction equipment
used in buildings today, highways, airports, utility systems, factories, stores and housing.
The movement of materials around and between building sites can be very time-
consuming and non-productive; therefore wherever economically possible most
contractors will use some form of mechanical transportation.
Construction Machinery are heavy-duty vehicles, specially designed for executing
construction tasks, most frequently, ones involving earth moving. They are also known as
construction equipment, earth movers, heavy equipment or just plain equipment. They
usually comprise five equipment systems: implement, traction, structure, power train,
control and information.
http://en.wikipedia.org/wiki/Equipmenthttp://en.wikipedia.org/wiki/Equipment8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
3/31
3
1.2 SMALL POWERED PLANT
Figure 1.2.3 (a): Cartridge Hammers
Generally, small plant can be considered to be hand-held or operated power tools
with their attendant power sources such as compressor for pneumatic tools. Most
hand-held power tools are operated by electricity or compressed air either to rotate the
tool or drive it by percussion.
Types Of Small Powered Plant :
a) Electric Hand Toolb) Pneumatic Toolsc) Cartridge Hammersd) Vibratorse) Power Floatsf) Pumpsg) Rollers
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
4/31
4
1.2.1 Electric Hand Tools
Figure 1.2.1 (a): Examples Of Electric Hand Tools
A electric hand tools is a tool powered by an electric motor, an internal
combustion engine, a steam engine, compressed air, direct burning of fuels andpropellants, or even natural power sources like wind or moving water. Power tools are
classified as either stationary or portable, where portable means handheld. The most
common hand-held tool is the electric drill for boring holes into timber, masonry and
metals using twist drills.
They are used in industry, in construction, and around the house for driving,
drilling, cutting, shaping, sanding, grinding, polishing, painting, and heating.
Stationary power tools for metalworking are usually called machine tools. The term
machine tool is not usually applied to stationary power tools for woodworking,
although such usage is occasionally heard, and in some cases, such as drill presses and
bench grinders, exactly the same tool is used for both woodworking and
metalworking.
http://en.wikipedia.org/wiki/Toolhttp://en.wikipedia.org/wiki/Electric_motorhttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Steam_enginehttp://en.wikipedia.org/wiki/Machine_toolshttp://en.wikipedia.org/wiki/Drill#Drill_presshttp://en.wikipedia.org/wiki/Bench_grinderhttp://en.wikipedia.org/wiki/Bench_grinderhttp://en.wikipedia.org/wiki/Drill#Drill_presshttp://en.wikipedia.org/wiki/Machine_toolshttp://en.wikipedia.org/wiki/Steam_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Internal_combustion_enginehttp://en.wikipedia.org/wiki/Electric_motorhttp://en.wikipedia.org/wiki/Tool8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
5/31
5
1.2.2 Pneumatic Tools
Figure 1.2.2 (a): Examples Of Pneumatic Tools
These tools need a supply of compressed air as their power source and
powered by a diesel, petrol or electric motor. One of the most common pneumatic
tools used is the breaker which is basically intended for breaking up hard surfaces
such as roads.
Other equipments which can be operated by compressed air include vibrators
for consolidating concrete, small trench sheeting or sheet pile-driving hammers,
concrete spraying equipment, paint sprayers and hand-held rotary tools such as drills,
grinders and saws.
Types Of Pneumatic Tools:
a) Air impact wrenchb) Air ratchetc) Airbrushd) Blow Gune) Jackhammerf) Pneumatic angle grinderg) Pneumatic drill
http://en.wikipedia.org/wiki/Impact_wrenchhttp://en.wikipedia.org/wiki/Air_ratchethttp://en.wikipedia.org/wiki/Airbrushhttp://en.wikipedia.org/w/index.php?title=Blow_Gun&action=edit&redlink=1http://en.wikipedia.org/wiki/Jackhammerhttp://en.wikipedia.org/wiki/Angle_grinderhttp://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Angle_grinderhttp://en.wikipedia.org/wiki/Jackhammerhttp://en.wikipedia.org/w/index.php?title=Blow_Gun&action=edit&redlink=1http://en.wikipedia.org/wiki/Airbrushhttp://en.wikipedia.org/wiki/Air_ratchethttp://en.wikipedia.org/wiki/Impact_wrench8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
6/31
6
h) Pneumatic jack (device)i) Pneumatic nail gun
j) sandblasterk) Paint sprayerl) Tire Chuckor Inflator
1.2.3 Cartridge Hammers
Figure 1.2.3 (a): Cartridge Hammers
CartridgeHammers normally used for the quick fixing together of components of for
firing into a surface a pin with a threaded head to act as a bolt fixing.
http://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Pneumatic_drillhttp://en.wikipedia.org/wiki/Jack_%28device%29http://en.wikipedia.org/wiki/Nail_gunhttp://en.wikipedia.org/wiki/Sandblastinghttp://en.wikipedia.org/wiki/Spray_paintinghttp://en.wikipedia.org/w/index.php?title=Tire_Chuck&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Inflator&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Inflator&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Tire_Chuck&action=edit&redlink=1http://en.wikipedia.org/wiki/Spray_paintinghttp://en.wikipedia.org/wiki/Sandblastinghttp://en.wikipedia.org/wiki/Nail_gunhttp://en.wikipedia.org/wiki/Jack_%28device%298/3/2019 CONSTRUCTION PLANT AND MACHINERIES
7/31
7
1.2.4 Vibrators
After concrete has been placed it should be consolidated either by hand
tamping or by using special vibrators. The power for vibrators can be supplied by a
small petrol engine, an electric motor and in some cases by compressed air.
Figure 1.2.4 (a): Poker Vibrator
There were three basic forms of vibrator are used in building works:
a) Poker vibratorb) Vibration tampersc) Clamp vibrator
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
8/31
8
Figure 1.2.4 (b): Poker Vibrator
The function poker vibrator :
Immersed into the wet concrete Due to their high rate of vibration they induce the concrete to consolidate.
Figure 1.2.4 (b): Vibration Tampers
The function Vibration tampers :
Small vibrating engines which are fixed to the top of a tamping board forconsolidating concrete paving and slabs.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
9/31
9
Figure 1.1.4 (c): Clamp vibrator
The function of clamp vibrator :
Similar devices but are attached to the external sides of formwork tovibrate the whole of the form.
Care must be taken when using this type of vibrator to ensure that theformwork has sufficient in-built-strength to resist the load of the concrete
and to withstand the vibrations.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
10/31
10
1.2.5 Power FloatsPower floats is by far the best equipment to use for your concrete floor. This
gives a nice finish to your concrete floor which making the concrete floor surface very
hard and very durable. A power floats work is only used for smoothening of the
concrete floor but it does not level. This is a machine which is used to bring a shine
and hard surface to your concrete floats. The concrete power trowel enables your floor
to be finished in a smooth dust free and reasonably durable surface. When using a
concrete power trowel you will be able to level off the spots and small holes which
might be found on your concrete floor. Some are due to air bubbles and some are due
to the hard substance which might be there. But it is necessary to level the floor and
lay it before you start using the concrete power trowel. The concrete floor should also
be compacted. You should also hand trowel the edges of the concrete floor and the
beam creed, straight edges among all the nooks and crannies of your concrete floor.
The main joint should also be done by a hand trowel before the use of concrete power
trowel.
Figure 1.2.5 (a): Power Floats
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
11/31
11
Power floats differ in the way they are controlled:
1. Ride-on power trowels are used by an operator sitting on a seat uponthe machinery, controlling the power trowel with the necessary
buttons.
2. Walk-behind power trowels are used by an operator walking behindthe machine.
3. Hand-operated rotary machines powered by a petrol engine or anelectric motor which drives the revolving blades or revolving disc.
1.2.6 Pumps
Figure 1.2.6 (a): vertical centrifugal pump
Among the most important items of small plant for the building contractor since
they must be reliable in all conditions, easy to maintain, easily transported and
efficient. The basic function of a pump is to move liquids vertically or horizontally or
in a combination of the two directions.
Pumps in common use for general building works can be classified as followed:
a) Centrifugal Pumpb) Displacement Pumpc) Submersible Pump
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
12/31
12
Figure 1.2.6 (a): Centrifugal Pump
A centrifugal pump is one of the simplest pieces of equipment. Its purpose is
to convert energy of an electric motor or engine into velocity or kinetic energy and
then into pressure of a fluid that is being pumped. The energy changes occur into two
main parts of the pump, the impeller and the volute. The impeller is the rotating part
that converts driver energy into the kinetic energy. The volute is the stationary part
that converts the kinetic energy into pressure.
The pump classed as normal or self-priming. It consist of a rotary impeller
which revolves at high speed forcing the water to the sides of the impeller chamber
thus creating a vortex which sucks air out of the suction hose.
Normal centrifugal pumps are easy to maintain but require priming with water at the
commencement of each pumping operation. Normally the pump have a reserved
supply of water in the impeller chamber.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
13/31
13
Figure 1.2.6 (b): Displacement Pump
A variable displacement pump is a device that converts mechanical energy
to hydraulic (fluid) energy. The displacement, or amount of fluid pumped per
revolution of the pump's input shaftcan be varied while the pump is running. Many
variable displacement pumps are "reversible", meaning that they can act as ahydraulic motor and convert fluid energy into mechanical energy.
It is either reciprocating or diaphragm pumps. Normally reciprocating pumps
work by the action of a piston or ram moving within a cylinder. The displacement
pump can have more than one cylinder, forming what is called a duplex (two-
cylinder) or triplex (three-cylinder) pump.
The advantages of using this type of pump are high efficient and capable of
increased capacity with increased engine speed. The disadvantage of using this pump
is the pump unable to handle water containing solids.
A common variable displacement pump used in vehicle technology is the axial
piston pump. This pump has several pistons in cylinders arranged parallel to each
other and rotating around a central shaft. A swashplate at one end is connected to the
pistons. As the pistons rotate, the angle of the plate causes them to move in and out of
their cylinders. A rotary valve at the opposite end from the swashplate alternately
http://en.wikipedia.org/wiki/Mechanical_energyhttp://en.wikipedia.org/wiki/Hydraulicshttp://en.wikipedia.org/wiki/Axial_piston_pumphttp://en.wikipedia.org/wiki/Axial_piston_pumphttp://en.wikipedia.org/wiki/Pistonhttp://en.wikipedia.org/wiki/Cylinder_%28engine%29http://en.wikipedia.org/wiki/Swashplatehttp://en.wikipedia.org/wiki/Rotary_valvehttp://en.wikipedia.org/wiki/Rotary_valvehttp://en.wikipedia.org/wiki/Swashplatehttp://en.wikipedia.org/wiki/Cylinder_%28engine%29http://en.wikipedia.org/wiki/Pistonhttp://en.wikipedia.org/wiki/Axial_piston_pumphttp://en.wikipedia.org/wiki/Axial_piston_pumphttp://en.wikipedia.org/wiki/Hydraulicshttp://en.wikipedia.org/wiki/Mechanical_energy8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
14/31
14
connects each cylinder to the fluid supply and delivery lines. By changing the angle of
the swashplate, the stroke of the pistons can be varied continuously. If the swashplate
is perpendicular to the axis of rotation, no fluid will flow. If it is at a sharp angle, a
large volume of fluid will be pumped. Some pumps allow the swashplate to be moved
in both directions from the zero position, pumping fluid in either direction without
reversing the rotation of the pump.
Figure 1.2.6 (b): Submersible Pump
A submersible pump (or electric submersible pump (ESP) is a device
which has a hermetically sealed motor close-coupled to the pump body. The whole
assembly is submerged in the fluid to be pumped. The main advantage of this type of
pump is that it prevents pump cavitation, a problem associated with a high elevation
difference between pump and the fluid surface. Submersible pumps push fluid to the
surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient
than jet pumps.
http://en.wikipedia.org/wiki/Hermetic_sealhttp://en.wikipedia.org/wiki/Electric_motorhttp://en.wikipedia.org/wiki/Cavitationhttp://en.wikipedia.org/wiki/Eductor-jet_pumphttp://en.wikipedia.org/wiki/Eductor-jet_pumphttp://en.wikipedia.org/wiki/Cavitationhttp://en.wikipedia.org/wiki/Electric_motorhttp://en.wikipedia.org/wiki/Hermetic_seal8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
15/31
15
1.2.7 Rollers
Rollers normally designed to consolidate filling materials and to compact the
surface finished such as tar macadam for paths and paving. Basically used is a smaller
version of the large rollers used by contractors for road works.It was rely upon
deadweight to carry out the consolidating operation or by vibration as in the case of
lightweight rollers.
Figure 1.1.7 (a): Road Roller
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
16/31
16
2.0 MACHINERIES FOR EARTHWORK
Figure 2.0 (a): Earthwork in Cameron Highland
Earthworks are engineering works created through the moving and/or
processing of quantities of soil or unformed rock. In order to establish a properly
functional road, the terrain must often be adjusted. In many situations, geometric
design will often involve minimizing the cost of earthwork movement. Earthwork is
expressed in units of volumes (cubic meters in metric). Increases in such volumes
require additional trucks (or more runs of the same truck), which cost money. Thus, it
is important for designers to engineer roads that require very little earthwork.
Normally the process of clearing and grubbing during earthwork are :
a) removal of trees, shrubs, and other vegetationb) removing stumps and root mat at least 2 (600mm) below subgradec) less removal required for embankment heights > 5d) topsoil stripinge) much excavation
http://en.wikipedia.org/wiki/Engineeringhttp://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Rock_%28geology%29http://en.wikipedia.org/wiki/Rock_%28geology%29http://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Engineering8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
17/31
17
2.1 Types Of Machineries For Earthwork
a) Bulldozerb) Wheel Loaderc) Excavatord) Scrapere) Motor Graderf) Roller / Road rollerg) Dump Truck
2.1.1 Bulldozer
A bulldozer is a crawler equipped with a substantial metal plate (known as a
blade) used to push large quantities of soil, sand, rubble during construction work
(earthwork). Bulldozers are large and powerful tracked heavy equipment. It can easily
tow the tanks that weigh more than 70 tons. Because of these attributes, bulldozers are
used to clear areas of obstacles, large trees, and remains of structures.
Figure 2.1.1 (a): Bulldozer
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
18/31
18
2.1.2 Wheel Loader
It is a type of tractor, usually wheeled, sometimes on tracks, that has a front mounted
square wide bucket connected to the end of two booms (arms) to scoop up loose material
from the ground, such as dirt, sand or gravel, and move it from one place to another
without pushing the material across the ground. The wheel loader commonly used to
move a stockpiled material from ground level and deposit it into an awaiting dump truck
or into an open trench excavation.
Figure 2.1.2 (a): Wheel loader
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
19/31
19
2.1.3 Excavator
Hydraulic excavators are the major workhorses on many construction sites.
The most common are the standard hydraulic excavators with gooseneck boom, a
pivoting dipper stick and a bucket.It been used to excavate a trench for placing a storm
water system.The excavator can move under its own power using the tracks mounted on
the undercarriage.The operator can rotate the excavator through 360.
Figure 2.1.3 (a): Excavator
The function of an excavator for earthwork are :
a) Digging of trenches, holes, foundationsb) Material handlingc) Forestry workd) General grading/landscapinge) Heavy lift, lifting and placing of pipes (sewer pipe)f) River dredging - relocation of underwater sediments and soils for the construction
and maintenance of waterways and transportation infrastructures and for
reclamation and soil improvements.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
20/31
20
2.1.4 Scrapers
Figure 2.1.4 (a): Scrapers
A wheel tractor-scraper is a piece ofheavy equipment used for earthmoving.
The rear part has a vertically moveable hopper (also known as the bowl) with a sharp
horizontal front edge. The hopper can be hydraulically lowered and raised. When the
hopper is lowered, the front edge cuts into the soil or clay like a plane and fills the
hopper. When the hopper is full .It is raised, and closed with a vertical blade (known
as the apron). The scraper can transport its load to the fill area where the blade is
raised, the back panel of the hopper, or the ejector, is hydraulically pushed forward
and the load tumbles out.
http://en.wikipedia.org/wiki/Heavy_equipmenthttp://en.wikipedia.org/wiki/Earthworks_%28engineering%29http://en.wikipedia.org/wiki/Earthworks_%28engineering%29http://en.wikipedia.org/wiki/Heavy_equipment8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
21/31
21
2.1.5 Motor Grader
A grader, also commonly referred to as a road grader or a motor grader, is
a construction machine with a long blade used to create a flat surface. Typical models
have three axles, with the engine and cab situated above the rear axles at one end of
the vehicle and a third axle at the front end of the vehicle, with the blade in between.
In certain countries, for example in Finland, almost every grader is equipped with a
second blade that is placed in front of the front axle.
The function is to "finish grade" (refine, set precisely) the "rough grading"
performed by heavy equipment or engineering vehicles such as scrapers and
bulldozers.Graders are commonly used in the construction and maintenance of dirt
roads and gravel roads. In the construction of paved roads they are used to prepare the
base course to create a wide flat surface for the asphalt to be placed on. Graders are
also used to set native soil foundation pads to finish grade prior to the construction of
large buildings.
Figure 2.1.5 (a): Motor Grader at Gambang, Pahang
http://en.wikipedia.org/wiki/Heavy_equipment_%28construction%29http://en.wikipedia.org/wiki/Axlehttp://en.wikipedia.org/wiki/Enginehttp://en.wikipedia.org/wiki/Cabin_%28truck%29http://en.wikipedia.org/wiki/Bladehttp://en.wikipedia.org/wiki/Finlandhttp://en.wikipedia.org/wiki/Dirt_roadhttp://en.wikipedia.org/wiki/Dirt_roadhttp://en.wikipedia.org/wiki/Gravel_roadhttp://en.wikipedia.org/wiki/Road_constructionhttp://en.wikipedia.org/wiki/Base_coursehttp://en.wikipedia.org/wiki/Asphalthttp://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Foundation_%28architecture%29http://en.wikipedia.org/wiki/Foundation_%28architecture%29http://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Asphalthttp://en.wikipedia.org/wiki/Base_coursehttp://en.wikipedia.org/wiki/Road_constructionhttp://en.wikipedia.org/wiki/Gravel_roadhttp://en.wikipedia.org/wiki/Dirt_roadhttp://en.wikipedia.org/wiki/Dirt_roadhttp://en.wikipedia.org/wiki/Finlandhttp://en.wikipedia.org/wiki/Bladehttp://en.wikipedia.org/wiki/Cabin_%28truck%29http://en.wikipedia.org/wiki/Enginehttp://en.wikipedia.org/wiki/Axlehttp://en.wikipedia.org/wiki/Heavy_equipment_%28construction%298/3/2019 CONSTRUCTION PLANT AND MACHINERIES
22/31
22
2.1.6 Road Roller
A road roller also referred to as roller-compactor or just roller is a compactor
type engineering vehicle employed to compact gravel, soil, concrete, or asphalt in the
creation of roads and foundations. Road rollers are also known as steam rollers
despite their method of propulsion.
Road Rollers are basically used to compress the surface on which the roller is
being rolled. The elasticity of the tyres with a certain amount of vertical movement
helps the roller to operate effectively even on an uneven ground. The finish is done
via metal-drum rollers to make sure of a smooth, even result. Rollers are employed in
landfill compaction. Such compactors are equipped with knobbed wheels and do not
have a smooth surface. The knobs help in compression due to the smaller area
touching the ground.
Types Of Road Roller :
a) Manual walk-behind
b) Powered walk-behind (electric or diesel/gas powered)
c) Vibratory
d) Pneumatic rubber-tired roller
e) Tandem roller
f) Trench roller (manual units or radio-frequency remote control)
g) Ride-on
h) Ride-on with knock-down bar
i) Ride-on articulating-swivel
j) Tractor-mounted and powered
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
23/31
23
Figure 2.1.6 (a): Pneumatic rubber-tired roller
Figure 2.1.6 (b): Pneumatic rubber-tired roller
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
24/31
24
2.1.7 Dump Truck
A dump truck is a truckused for transporting loose material such as sand,
gravel, or dirt for construction.It is used instead of scrapers when the soil is beingexcavated by loaders. Most of the dump truck can travel over public highways, and
move faster than scrapers.
A typical dump truck is equipped with a hydraulically operated open-box bed
hinged at the rear, the front of which can be lifted up to allow the contents to be
deposited on the ground behind the truck at the site of delivery. In the UK and
Australia the term applies to off-road construction plant only, and the road vehicle is
known as a tipper, tipper lorry (UK) or tip truck (AU).
Figure 2.1.7 (a): Dump Truck
http://en.wikipedia.org/wiki/Truckhttp://en.wikipedia.org/wiki/Sandhttp://en.wikipedia.org/wiki/Gravelhttp://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Constructionhttp://en.wikipedia.org/wiki/Hydraulic_machineryhttp://en.wikipedia.org/wiki/Hydraulic_machineryhttp://en.wikipedia.org/wiki/Constructionhttp://en.wikipedia.org/wiki/Soilhttp://en.wikipedia.org/wiki/Gravelhttp://en.wikipedia.org/wiki/Sandhttp://en.wikipedia.org/wiki/Truck8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
25/31
25
3.0` Machineries Used for Transporting Work
Types Of Road Roller :
a) Backhoeb) Tipper Truckc) Forklift truckd) Hoist
3.1 Backhoe
Figure 3.1 (a): Backhoe
A backhoe, also called a rear actor or back actor, is a piece of excavating
equipment or digger consisting of a digging bucket on the end of a two-part
articulated arm. They are typically mounted on the back of a tractor or front loader
Normally the backhoe is use for the variety of task such as construction, small
demolitions and paving roads.The backhoe bucket can also replaced with power
attachment breaker, grapple, auger or stump grinder.The design of the backhoe is
http://en.wikipedia.org/wiki/Excavatorhttp://en.wikipedia.org/wiki/Tractorhttp://en.wikipedia.org/wiki/Loader_%28equipment%29http://en.wikipedia.org/wiki/Loader_%28equipment%29http://en.wikipedia.org/wiki/Tractorhttp://en.wikipedia.org/wiki/Excavator8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
26/31
26
unstable so the backhoe has to be design with hydraulic outriggers only at the back
when digging and lower the loader bucket for extra stability.
3.2 Tipper Truck
Figure 3.2 (a): Tipper truck
The tipper truck also known as dump truck is the usually machineries we can
see at construction site.It is a truck that used for transporting construction material and
loose material such as sand, gravel, or dirt.
A typical truck is equipped with a hydraulically operated open-box bed hinged
at the rear, the front of which can be lifted up to allow the contents to be deposited on
the ground behind the truck at the site of delivery.
The largest of the standard dump trucks is commonly called a "centipede" and has
seven axles.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
27/31
27
3.3 Forklift
Figure 3.3 (a): Forklift
Sometimes called a forklift truck, the forklift is a powerful industrial truck that
is used to lift and transport material by steel forks that are inserted under the load.
Forklifts are commonly used to move loads and equipment that is stored on pallets.
The forklift was developed in 1920, and has since become a valuable piece of
equipment in many manufacturing and warehousing operations.
The most common type of design with forklifts is the counter balance. Other types of
designs include the reach truck and side loader, both of which are used in
environments where the space is at a minimum.
Forklifts are available in many types and different load capacities. In the
average warehouse setting, most forklifts have load capacities of around five tons.
Along with the control to raise and lower the forks, you can also tilt the mast to
compensate for the tendency of the load to angle the blades towards the ground and
risk slipping it off the forks. The tilt will also provide a limited ability to operate on
ground that isn't level.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
28/31
28
3.4 Hoist
Figure 3.4 (a): Hoist
Hoist is a means of transporting material or passengers vertically by means of
a moving level platform. Recent designs have been orientated towards the combined
materials/passenger hoist.
Materials hoists come in basically two forms, namely the static and mobile
models. The static version consists of a mast or tower with the lift platform, either
cantilevered from the small section mast or centrally suspended with guides on either
side, within an enclosing tower. Mobile hoists should be positioned on a firm level
base and jacked to ensure stability. The operation of a materials hoist should be
entrusted to a trained driver who has a clear view from the operating position. Figure
1.8 shows a type of crane namely wheel mounted crane.
8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
29/31
29
4.0 Other Types Of Machineries
Types of Machineries :
a) Welding Setb) Compresser
4.1 Welding Set
Figure 4.1 (a): Welding Set
Welding is a fabrication or sculptural process that joins materials, usually
metals or thermoplastics, by causing coalescence. Welding is always use in
mechanical work such as weld the steel windows frame. A welding power supply is a
device that provides an electric current and gas to perform welding. Welding usually
requires high current (over 80 amperes) and it can need above 12,000 amperes in spot
welding. Low current can also be used. Welding two razor blades together at 5 amps
with gas tungsten arc welding is a good example. A welding power supply can be as
simple as a car battery and as sophisticated as a modern machine based on silicon
controlled rectifier technology with additional logic to assist in the welding process.
http://en.wikipedia.org/wiki/Fabrication_%28metal%29http://en.wikipedia.org/wiki/Welded_sculpturehttp://en.wikipedia.org/wiki/Process_%28science%29http://en.wikipedia.org/wiki/Metalhttp://en.wikipedia.org/wiki/Thermoplastichttp://en.wiktionary.org/wiki/coalescehttp://en.wikipedia.org/wiki/Electric_currenthttp://en.wikipedia.org/wiki/Weldinghttp://en.wikipedia.org/wiki/Spot_weldinghttp://en.wikipedia.org/wiki/Spot_weldinghttp://en.wikipedia.org/wiki/Gas_tungsten_arc_weldinghttp://en.wikipedia.org/wiki/Car_batteryhttp://en.wikipedia.org/wiki/Silicon_controlled_rectifierhttp://en.wikipedia.org/wiki/Silicon_controlled_rectifierhttp://en.wikipedia.org/wiki/Silicon_controlled_rectifierhttp://en.wikipedia.org/wiki/Silicon_controlled_rectifierhttp://en.wikipedia.org/wiki/Car_batteryhttp://en.wikipedia.org/wiki/Gas_tungsten_arc_weldinghttp://en.wikipedia.org/wiki/Spot_weldinghttp://en.wikipedia.org/wiki/Spot_weldinghttp://en.wikipedia.org/wiki/Weldinghttp://en.wikipedia.org/wiki/Electric_currenthttp://en.wiktionary.org/wiki/coalescehttp://en.wikipedia.org/wiki/Thermoplastichttp://en.wikipedia.org/wiki/Metalhttp://en.wikipedia.org/wiki/Process_%28science%29http://en.wikipedia.org/wiki/Welded_sculpturehttp://en.wikipedia.org/wiki/Fabrication_%28metal%298/3/2019 CONSTRUCTION PLANT AND MACHINERIES
30/31
30
4.2 Compressor
Figure 4.1 (a): Welding Set
A gas compressor is a mechanical device that increases the pressure of a gas
by reducing its volume. Compressors are similar to pumps which are both increase the
pressure on a fluid and both can transport the fluid through a pipe. As gases are
compressible, the compressor also reduces the volume of a gas. Liquids are relatively
incompressible, while some can be compressed, the main action of a pump is to
pressurize and transport liquids. It always use in time of use the air compress tool
such as nail gun that want the high pressure of air to be use. Compressors are similar
to pumps: both increase the pressure on a fluid and both can transport the fluid
through a pipe. As gases are compressible, the compressor also reduces the volume of
a gas. Liquids are relatively incompressible, while some can be compressed, the main
action of a pump is to pressurize and transport liquids.
http://en.wikipedia.org/wiki/Pressurehttp://en.wikipedia.org/wiki/Gashttp://en.wikipedia.org/wiki/Volumehttp://en.wikipedia.org/wiki/Pumphttp://en.wikipedia.org/wiki/Fluidhttp://en.wikipedia.org/wiki/Pipe_%28material%29http://en.wikipedia.org/wiki/Pumphttp://en.wikipedia.org/wiki/Fluidhttp://en.wikipedia.org/wiki/Pipe_%28material%29http://en.wikipedia.org/wiki/Pipe_%28material%29http://en.wikipedia.org/wiki/Fluidhttp://en.wikipedia.org/wiki/Pumphttp://en.wikipedia.org/wiki/Pipe_%28material%29http://en.wikipedia.org/wiki/Fluidhttp://en.wikipedia.org/wiki/Pumphttp://en.wikipedia.org/wiki/Volumehttp://en.wikipedia.org/wiki/Gashttp://en.wikipedia.org/wiki/Pressure8/3/2019 CONSTRUCTION PLANT AND MACHINERIES
31/31
5.0 REFERENCES
Books
1. Teknologi Binaan Bangunan, Tan Boon Tong, B.Sc. (University ofWisconsin)
2. Hunker, Henry L. (2000). Columbus, Ohio: A Personal Geography. OhioState University
Websites
1. enlist.eil.co.in/pdd/cons/Annexure-III.pdf2. www.dot.state.oh.us/Divisions/ConstructionMgt/.../EarthworkI.pdf3. http://en.wikipedia.org/wiki/Gas_compressor4. http://www.gnpgeo.com.my/download/spec/UnderDev/DSP%20019.pdf
http://en.wikipedia.org/wiki/Gas_compressorhttp://en.wikipedia.org/wiki/Gas_compressorhttp://www.gnpgeo.com.my/download/spec/UnderDev/DSP%20019.pdfhttp://www.gnpgeo.com.my/download/spec/UnderDev/DSP%20019.pdfhttp://www.gnpgeo.com.my/download/spec/UnderDev/DSP%20019.pdfhttp://en.wikipedia.org/wiki/Gas_compressor