8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
1
Consultix -‐Walk-‐View PC Result Capture & Manipulation of WRX
Receivers
User guide
(V1.6)
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
2
Contents
Setup ........................................................................................................................................................................ 3
Prepare for a measurement Trip .......................................................................................................................... 5
Start Measurement ................................................................................................................................................. 8
During a Walk-Test ................................................................................................................................................ 9
Archiving & Export .................................................................................................................................................. 9
Playback .................................................................................................................................................................. 9
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
3
Setup
1- Decompress the Provided folder named “Consultix Walk-View” to a relevant location
2- Right click on the setup icon and then choose “Run as
administrator”
3- Press “Next” in the shown window
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
4
4- Press “Yes” in the shown window when asked about Installing
Drivers (press yes only if the drivers is installed for the first time)
5- Press “Close” to finalize the setup
6- Go to “Control Panel” then “ Regional and Language Settings”, and
then set the language to American
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
5
Prepare for a measurement Trip
1- Open the desktop shortcut “Consultix Walk View"
2- Connect the receiver to you PC, it will be engaged automatically (use the provided Mini USB-B cable)
3- Wait till the status bar shows “Ready”
4- Press the “Settings” icon to adjust the following parameters:
“General” sub menu - The com port assigned to the receiver
- The capturing rate of measurement results - The measure point highlight size - Activating/ Deactivating inter-point lines - Number of display channels
“Ranges” sub menu
- The legend of colors
“GPS” sub menu - The GPS com port and baud rate
• Kindly Note that our software is compatible with any GPS device
complies with NEMA standard.
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
6
5- Press “Session Manager” icon
6- Press on “Add working folder” to add a folder for the desired Tests/ trips
7- To add a new site, Press on the related working folder, then Press “Add Site” as shown below
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
7
8- A new window will pop-up, Configure the new site parameter as follows:
- Site Name - Site Image (Press “Browse” to import the site layout/plan) - Site length and wide (Incase the measurement file will be
used in post processing, or exported to a .CSV file) - Channel Frequency values
9- Create a working session for every round as desired for every site.
Press on the needed site, then Press “Add new session”, Write the session name and any comment for further reference.
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
8
Start Measurement
1- Press “Run session” for any new session or save one to start your walk-view test
2- You can start, stop, pause and resume your session by Pressing “Start new path”, “Stop”, “Pause”, or “Resume”
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
9
During a Walk-Test
- After Pressing “Start new test “, Correlate your real start point to the floor layout, and then click on the corresponding starting point. The S/W will start capturing the receiver measurements while you are walking to the second point. When you Press on the second point in the floor layout, the automatic captured measurement points will be distributed equidistantly between point 1 and point 2.
- You could control that capturing rate or the point’s size from the “settings” menu mentioned above in step # 3.
Archiving & Export - After finishing the test, Press the stop button, and Press “Save session”. After saving the session, Press “Export session data” in the main bar to export the test results to a .CSV file. - You can save the test picture, and send it to another user with no access to the Walk-View software.
Playback
- Press “Export playback” to export the media clip file. You can view the Media clip within the Walk-View software, or send the exported file to any other user with no access to the software.
8 Masr Lel-‐Taa’meer Buildings, 9th area, 11361 Sheraton Heliopolis, Cairo, Egypt Tel:+20105006238 Fax: +20222670535 www.consultix-‐egypt.com
10
For customer support
- For any support inquiry, kindly contact: Support: [email protected]
Or Contact our distributer covering your region (check www.consultix-egypt.com)
For customer sales
- For any sales inquiry, kindly contact: Sales: [email protected]
Or Contact our distributer covering your region (check www.consultix-egypt.com)
