Havells India Ltd.QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-4771000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
Regional & Branch Offices:
NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-4771000, Fax: 0120-4772000, Delhi: Tel: 011-47676700, 23888200, Fax: 011-47676750, 23888250, Chandigarh: Tel: 0172 4232400-401, Fax: 0172-4232403, Dehradun: Tel: 0135-6670202, Fax: 0135-6670203, Noida / Haryana: Tel: 0120-3055609 / 3055610, Fax: 0120-3055611, Ludhiana: Tel: 0161-4676001 / 6024, Fax: 0161-46766007, Jammu: Tel: 0191-2490424, Fax: 0191-2490405, Sri Nagar: Tel/Fax: 0194-2490431, Jaipur: Tel: 0141-3988210, Fax: 0141-2389024, Jodhpur: Tel: 0141-3914645, 3988210, Lucknow: Tel: 0522-2201032, 2200938, Kanpur: Tel: Airtel: 09935533751/52/53, 0512-2690128/129/130, Fax: 0512-2692800
EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851/52, Fax: 033-40127339, Bhubaneshwar: Tel: 0674-2598104, 2598105, 2598106, Fax: 0674-2598107, Guwahati: Tel: 0361-2134521, 2458923, Fax: 0361-2460355, Siliguri: Tel: 0353-2525907, Fax: 0353-3290402 (RIM), Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, Telefax: 0612-2655518
WEST - REGIONAL OFFICE: Mumbai: 302, Boston House, 3rd Floor Suren Road, CTS No. 260/261, Andheri (E) Mumbai-400093, Tel: 022-67298600-603, Ahmedabad: Tel: 079-40061111, 40060738-740, Fax: 079-40060741, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Fax: 0731-2551626, Rajkot: Tel: 0281-2481112, 2921212 Fax: 2481112, Nagpur: Tel: 0712-2224132, 2222692, 2222029, Pune: Tel: 020-64016413/14, Raipur: Tel: 0771-4243400 / 01, Telefax: 0771-4243402, Surat: Tel: 09979890137, Telefax: 0261-2350137, Jabalpur: Tel: 0761-4064491
SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18/3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-30240021-22, Fax: 044-28524326, Bangalore: Tel: 080-49075000, 9844085913, Fax: 080-25582663, Coimbatore: Telefax: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Fax: 040-27533211, Kochi: Tel: 0484-4099000, 2393165, 2393068, Fax: 0484-2393170, Vishakapatnam: Tel: 0891-6514339, Fax: 0891-2522547, Vizag: Tel: 0891-6514339, Fax: 0891-25522547, Vijayawada: Tel: 91+9247058847/57
Representative Offices:
• Goa • Solapur • Gwalior • Hubli • Davanagere • Gulbarga • Mysore • Trichy • Kathmandu • Sambalpur • Jalandhar • Bhopal • Calicut • Madurai • Trivandrum
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication.Specifications & performance data are constantly changing. Current details should therefore be checked with Havells Group.
LP/Z
HLR
C00
019/
DE
C11
Catalogue 2012-13
Consum
er Lighting Solutions 2012-13
ConsumerLighting Solutions
Enduralite Innova Grid Crown Elite Maglev Dlx
Endura DL 16 Wingo Lite SM DL 21 Plus
Spring 3 Combay Ranger 2 Oval Ranger 1 CFL
Endura Cityliner Optal 1 Optal 2 New Crypton T5 4x24W
Endura Flat Panel LED Tunnel Tek Sq.
Sp
Enduralite Round
Havells’ energy efficientlighting equipments
now comes with an added feature.
Wide range.
With companies like Sylvania, Concord and Lumiance as a part of its
portfolio, Havells has presence in over 50 countries. It also exports to almost
every major market and is also the leading exporter of CFLs from India. With
over 1000 products, 91 offices and 16 plants, the future only looks bright.
E-mail: [email protected], www.havells.com,Consumer Care No.: 1800 103 1313 (All Connections), 011-4166 0303 (Landline)
1
2
3
4
5
6
7
Introduction of Havells .............................................. 2-3
Manufacturing Plant ................................................. 4-5
Item Code Logic ...................................................... 6-6
Guide to Symbols .................................................... 7-7
Product Index Alphabetically ..................................... 8-8
Product Index Category ......................................... 9-10
Consumer Lighting .............................................. 12-81
C o n t e n t s
2
Introduction of
HavellsWelcome to the world of Havells India Limited, a leading company in electrical consumer durable and power distribution equipment manufacturer with a strong global footprint. With total turnover exceeding billion-plus dollars, Havells enjoys an enviable market dominance across a wide spectrum of products and services, including Industrial & Domestic Circuit Protection Devices, Cables & Wires, Motors, Fans, Power Capacitors, CFL Lamps, Luminaires for Domestic, Commercial & Industrial Applications, Modular Switches, & Electric Water Heaters.
Powered by leading brands and strong service and delivery networkHavells owns some of the prestigious global brands like Havells, Crabtree, Sylvania, Concord, Luminance & Standard as part of its portfolio. Its global network constitutes of 91 branches and representative offices with over 8000 professionals in over 50 countries across the globe. Its twelve state-of-the-art manufacturing plants in India located at Haridwar, Baddi, Noida, Sahibabad, Faridabad, Alwar, Neemrana and six plants located across Europe & Latin America churn out globally acclaimed products, which are synonymous with excellence and expertise in the electrical industry.
3
Backed with its 20000 strong global distribution network, Havells continuously strives to set new benchmarks in prompt delivery and service to its customers – powering their smiles like none other electrical brand!
Recognised by world quality leadersHavells and its products & processes have acquired a number of International quality certifications, like BASEC, CSA, KEMA, CB, CE, ASTA, CPA, SEMKO, SIRIUM (Malaysia), SPRING (Singapore), TSE (Turkey), SNI (Indonesia) and EDD (Bahrain) – thus complying with stringent quality norms at even the most testing markets, worldwide.Today, Havells and its various brands, have earned the distinction of being the preferred choice of electrical products for discerning individuals and industrial consumers both in India and abroad and is all set to keep powering the world with its state-of-the-art innovations and energy-efficient solutions.
4
Havells - Alwar
Havells - Baddi
Havells - Neemrana
Manufacturing
Plants
5
Havells Sylvania - Germany
Havells Sylvania - Colombia
Havells Sylvania - Brazil
6
Consumer
Lighting
Lighting Havells Application Lamp Product No. Of Lamp Mounting Type Ballast Type Source Version Lamp Wattage ignitor Type Type
L H C C N 1 3 3 6 1 1 1
B = BallastC = CommercialD = DomesticE = EmergencyF = Flood LightG = Control Gear BoxI = IndustrialR = RoadwayS = SourcesV = Vapour ProofW = Well GlassY = Spare Parts
To Choose from Commercial range mirror optic AS series 36W with multiple variables.
B = Blended MVC = CFLF = Flourescent G = HPMVH = Tungsten Halogen L = GLSM = Metal HalideS = Sodium VapourT = T5 FTLW = Elliptical HID onlyY = Tubular HID onlyZ = Both E/T HID
A = MS white painted CAT III reflector (L1)B = Specular finish Al. CAT III reflector (L1)C = Specular finish Al. CAT II reflector (L2)N = Non Category LouvreP = Polycarbonate Louvre
CFL Lamps09 = 9W CFL11 =11W CFL13 = 13W CFL18 = 18W CFL/FPL/FTL26 = 26W CFL36 = 36W FPL/FTLFTL / T5 Lamps02 = 20W FTL04 = 40W FTL08 = 8W T5 FTL14 = 14W T5 FTL21 = 21W T5 FTL28 = 28W T5 FTL54 = 54W T5 FTL HID Lamps70 = 70W SV/MH80 = 80W MV12 = 125W MV15 = 150W SV/MH25 = 250W MV/SV/MH40 = 400W MV/SV/MH60 = 600W SV10 = 1000W SV/MH
For Commercial Fixture1 = Armstrong ceiling2 = Gypsum Board3 = Recess mounting4 = Surface mounting6 = Luxlon ceiling7 = Pendent mountingFor HID LuminairesA = Short distance Ignitor suitable for SV onlyB = Long distance Ignitor suitable for SV/MHC = Super Imposed IgnitorD = Short distance Ignitor suitable for SV/MHFor Fixture Fitted With Lamp3 = 2700K4 = 4000K5 = 5000K6 = 6500K
FTL/ FPL OCB07 = 230V, 18/20W FTL/FPL OCB09 = 230V, 36/40W FTL/FPL OCB11 = 240V, 36/40W FTL/FPL OCB15 = 240V, 18/20W FTL/FPL OCBCFL OCB17 = 7/9/11W CFL OCB18 = 13W CFL OCB20 = 18W CFL OCB21 = 26W CFL OCBElectronic Ballasts26 = 1X36/40W FTL EB THD<33%27 = 2X36/40W FTL EB THD<33%32 = 1X28W T5 FTL EB THD<33%33 = 2X28W T5 FTL EB THD<33%28 = 1X36/40W FTL DB THD 10%29 = 2X36/40W FTL DB THD<10%50 = 1X28W T5 FTL DB THD<10%51 = 2X28W T5 FTL DB THD<10%
1 = 1 Lamp2 = 2 Lamp3 = 3 Lamp4 = 4 Lamp
Specification Variables Ordering Code
Non Category louvres, Normal EM Ballast LHCCN1336111Non Category louvres, 6.0W EM Ballast LHCCN1336113L1 Category Louvres, 6.0W EM Ballast LHCCB1336113L2 Category louvres, HF individual Ballast < 33% LHCCC1336126L2 Category louvres, HF individual Ballast < 10% LHCCC1336128
Havells
Item Code Logic
7
Consumer
Lighting
Guide to Symbols
8
Consumer
Lighting
P r o d u c t I n d e x A l p h a b e t i c a l l y
1 Athena 2 (Prismatic) Page 68
2 Athena 3 (Moon) Page 69
3 Athena 4 (Globe) Page 70
4 Athena 5 (Opal) Page 71
5 Beetle Page 62
6 Candy Page 58
7 CFL Copper Ballast Page 80
8 CFL Electronic Ballast Page 75
9 City 1 New Page 65
10 City 2 (New) Page 66
11 City 3 Page 67
12 Crown Page 53
13 DL 15 E Page 46
14 DL 17 E Page 45
15 DL 50 Page 44
16 Dreamlite Electronic Page 24
17 Eco Signage Page 79
18 EL Star DX Page 76
19 Electra Page 29
20 Electra Popular Page 28
21 Electra Slim Page 27
22 E-Lite Desire Page 18
23 E-Lite EZ Popular Page 21
24 E-Lite Maglev DLX Page 19
25 E-Lite Maglev DLX Popular Page 20
26 Endura Lite Page 15
27 Endura Lite Combo Pack Page 13
28 Endura Lite Fixture Page 16
29 Endura Plate Page 14
30 Estilo Page 73
31 Eurostrip Page 30
32 Ezee Deluxe Page 31
33 Ezee Popular Page 32
34 Flute Page 17
35 FTL Copper Ballast Page 81
36 Glider Page 43
37 Innova 11 Watt Blister Pack Page 37
38 Innova 111 18 Watt Page 38
39 Innova 111Grid 18 Watt Page 35
40 Innova Combo Pack Page 36
41 Innova Downlighter Fixed Type Page 39
42 Innova Downlighter Swivel Type Page 40
43 Innova Grid 11 Watt Page 34
44 Korona 1 Page 54
45 Korona 2 Page 55
46 Liliput Electra Page 33
47 Lonon Round Page 50
48 Lonon Square Page 49
49 Lonon-Surface (Round) Page 52
50 Lonon-Surface (Square) Page 51
51 Lonova Round Page 48
52 Lonova-Square Page 47
53 Luna-4Pin Page 60
54 Matrix-4Pin Page 61
55 Neo 1 Page 41
56 Neo 2 Page 42
57 Ovale 1 Page 56
58 Ovale 2 Page 57
59 Peacock Page 59
60 Rayzor Page 74
61 Rayzor Electronic Page 26
62 Rayzor Slim Page 25
63 Rover EZ Page 23
64 Rover Plus Page 22
65 Signage Slim Page 77
66 Star Slim (Electronic Ballast) Page 78
67 Super Strip Page 72
68 Wallbrite Page 64
69 Wallbrite Electra Page 63
9
Consumer
Lighting
P r o d u c t I n d e x C a t e g o r y
DOWNLIGHTER
LED
WALL/CEILING FIXTURES
NON-RETROFIT
MINIATURE FLUORESCENT LAMP
RETROFIT
NON-RETROFIT
BATH/MIRROR LIGHTS
Endura Lite Combo PackPage 13
Innova Grid 11WPage 34
Neo 1Page 41
DL 17 EPage 45
FlutePage 17
CrownPage 53
WallbritePage 64
Innova Downlighter Swivel TypePage 40
Endura PlatePage 14
Innova 111 Grid 18WPage 35
Neo 2Page 42
DL 15 EPage 46
Ezee DeluxePage 31
CandyPage 58
Lonova SquarePage 47
Lonova RoundPage 48
Endura LitePage 15
Innova Combo PackPage 36
GliderPage 43
Lonon SquarePage 49
Ezee PopularPage 32
Liliput ElectraPage 33
PeacockPage 59
Innova 11W Blister PackPage 37
DL 50Page 44
Lonon RoundPage 50
Innova 111 18WPage 38
Innova Downlighter Fixed TypePage 39
Lonon-Surface (Square)Page 51
Lonon-Surface (Round)Page 52
LunaPage 60
MatrixPage 61
Wallbrite ElectraPage 63
Endura Lite FixturePage 16
10
Consumer
Lighting
RETROFIT
T8/T12 RANGE
COPPER RANGE
ACCESSORIES
BATTEN & STRIPLITE RANGE
T5 RANGE
Korona 1Page 54
Super StripPage 72
CFL Electronic BallastPage 75
E-Lite DesirePage 18
City 2 (New)Page 66
Korona 2Page 55
EstiloPage 73
El-Star DXPage 76
E-Lite Maglev DlxPage 19
City 3Page 67
Ovale 1Page 56
RayzorPage 74
Signage SlimPage 77
E-Lite Maglev Dlx Pop.Page 20
Athena 2 (Prismatic)Page 68
Ovale 2Page 57
E-Lite EZ PopularPage 21
Athena 3 (Moon)Page 69
BeetlePage 62
EurostripPage 30
Athena 4 (Globe)Page 70
City 1 (New)Page 65
Star SlimPage 78
Eco SignagePage 79
CFL Copper BallastPage 80
Athena 5 (Opal)Page 71
Rover PlusPage 22
Rover EZPage 23
Dreamlite ElectronicPage 24
Rayzor SlimPage 25
Rayzor ElectronicPage 26
Electra SlimPage 27
Electra PopularPage 28
ElectraPage 29
FTL Copper BallastPage 81
11
Consumer
Lighting
Consumer
Lighting
13
Consumer
Lighting
Endura Lite Combo Pack
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHOD01103374LHOD01103674LHOD02301374 LHOD02301674
1x3W LED-3K1x3W LED-6K3x1W LED-3K3x1W LED-6K
230230230 230
0.0550.0550.055 0.055
Clip-onClip-onClip-onClip-on
Ø80.8
Ø80.8
66.0
Top View
Front View
46±
2
66.0
Top View
Front View
46±
2
Enduralite, ultra bright LED spotlight with 360° swivel fixture and electronic driver pre-packed in blister.
Specification
HousingMade up of pressure die-cast aluminium with decorative face.
FinishSilver - Brush.
OpticsGeneral diffuser, view angle-25O, clear lens to make comfortable lighting.
Lamp holderBy means of mini flexi clip-on with wires.
Electric gearPre fitted with HF electronic driver upto terminal block with clip-on connector to fit with lamp.
MountingFixed on false ceiling by means of SS spring clips/ blades.
ApplicationsResidencesClean roomsHospital premisesConference rooms
Cutout size : Ø70 mmAll dimensions are in mm
14
Consumer
Lighting
Endura Plate
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHOH83250399LHOH83450399
2x3W LED4x3W LED
230230
0.1100.220
Clip-onClip-on
110±
246
±1
200±2
Top View
Front View
200±
2
200±2
46±
1
Top View
Front View
Enduraplate, ultra bright LED spotlight with 360° swivel fixture provided with electronic driver.
Specification
HousingDecorative silver brush finish cast aluminium LM 24 plate.
FinishSilver - Brush.
MountingFixed into false ceiling with the help of SS spring clips.
ApplicationsSuitable for MR 16/ Innova 11/ Endura Lite.
All dimensions are in mm
Cutout size : 173x87 mm
Cutout size : 173x173 mmData given with Endura Lite.
15
Consumer
LightingD-10
Endura Lite
Enduralite, ultra bright LED spotlight and electronic driver pre-packed in blister, a cool replacement for MR 16 lamp (Dichroic Lamp).
Specification
Lamp housingCompact design pressure die-cast aluminium housing.
FinishTextured finish/ Brush finish.
OpticsGeneral diffuser, view angle-25O, clear lens to make comfortable lighting.
Lamp holderBy means of mini flexi clip-on with wires.
Electric gearPre fitted with HF electronic driver upto terminal block with clip-on connector to fit with lamp.
MountingFixed on false ceiling wherein replacement of dichroic lamp/ MR 16 lamp.
ApplicationsResidencesClean roomsHospital premisesConference rooms
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHOD03103374LHOD03103674LHOD04301374 LHOD04301674
1x3W LED-3K1x3W LED-6K3x1W LED-3K3x1W LED-6K
230230230 230
0.0550.0550.055 0.055
Clip-onClip-onClip-onClip-on
Ø50
Top View
Front View
46±
1
40.5Ø4.0
Ø3.4
20.6
49.7
57.5
±1
Top ViewFront View
Endura Lite LED Driver
Description : Endura Lite 3x1WOrd. Code : LHBD01301078Supply Voltage : 110-240VAC 50/60HzCurrent : 350mAPower : upto 3W max.ta=50º Ctc=70º C
HL08
tc
F
All dimensions are in mm
16
Consumer
Lighting
Endura Lite Fixture
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHOD01103099 1x3W LED 230 0.055 Clip-on
Cast aluminium swivel fixture in silver finish suitable for endura lite.
Specification
HousingDecorative silver finish cast aluminium LM 24 ring rivetted to the black powder coated MS frame.
FinishMatt silver finish face with glossy border.
MountingFixed into false ceiling with the help of SS spring clips rivetted to the ring.
ApplicationsSuitable for MR 16/ Innova 11/ Endura Lite.
Ø77.2Ø82.0
Top View
Front View
30±
1
67.0Side View
Cutout size : Ø71 mmAll dimensions are in mm
17
Consumer
Lighting
Flute
Specification
HousingMade up of high grade engineering plastic (ABS) body.
OpticsMethacrylate round shaped diffuser with 50% reflector coated to give directional light.360o rotation of the diffuser gives a provision to direct the light output in desired direction.
Lamp holderPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre wired with 230V HF electronic ballast upto terminal block.
Not recommended for 240V industrial application
MountingFixed on wall / ceiling with the help of screws3 mounting arrangements provided for flexible mounting arrangementa) Steel C – Clampsb) L – Clampsc) Direct fit clamp
ApplicationsMirror lightStudy room lightHotelsResidences Art galleriesMuseumsRecreation clubs
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDT15113431LHDT15113631
T2 13W FTL - 4KT2 13W FTL - 6K
230230
0.0600.060
W4.3x8.5dW4.3x8.5d
>0.98>0.98
Elegantly designed contemporary ultra sleek Mirror Light suitable for T2 13W Lamp.
24±
1
OPEN
CLOSE
OPEN
CLOSE
Top View
540±2
Front View
Side View
R11
44±
1
Flute
All dimensions are in mm
18
Consumer
Lighting
E-Lite Desire
Decorative ultra slim fixture with extruded aluminium body, prismatic diffuser, snap on installers & HF electronic ballast suitable for T5 FTL.
Specification
HousingMade up of ultra slim extruded aluminium channel with rib for extra strength, powder coated with white finish.
End capsTwin silver colour clip-on end caps provided for better aesthetic appearance.
DiffuserMethacrylate, prismatic diffuser for glare free light.
Lamp holdersPush fit rotary type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, pre-fitted with lamp.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of snap-on installers provided.
ApplicationsResidencesClean roomsCove lightingHospital premisesEducational institutionsCorridors
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDT01114631LHDT01128632
1x14W T5 FTL1x28W T5 FTL
230230
0.1100.220
G5G5
>0.55>0.55
Lamp Type Length (L) Width (W) Height (H)
1x14W T5 FTL1x28W T5 FTL
625+21225+2
24+124+1
38+138+1
All dimensions are in mm
L
H
Top View
Front View
WSide View
19
Consumer
Lighting
E-Lite Maglev DLX
Top View
W
Front ViewL
H
Side View
Decorative ultra slim fixture with extruded aluminium body prismatic diffuser, snap on installers & HF electronic ballast suitable for 8W/ 14W/ 28W/ 54W T5 FTL.
Specification
HousingMade up of ultra slim extruded aluminium, powder coated with white finish.
End capsSilver colour clip-on end caps provided as standard upto 28W T5 FTL. Blue colour clip -on-end caps provided as standard for 54W T5 FTL.
DiffuserMethacrylate, prismatic diffuser for glare free light.
Lamp holdersPush fit rotary type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, pre-fitted with lamp.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of snap-on installers provided.
ApplicationsResidencesClean roomsCove lightingHospital premisesEducational institutionsCorridors
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF11108031LHDF11114031LHDF11128332LHDF11128032 LHDF11154371LHDF11154071
1x8W T5 FTL - 6K1x14W T5 FTL - 6K1x28W T5 FTL - 3K1x28W T5 FTL - 6K1x54W T5 FTL - 3K1x54W T5 FTL - 6K
230230230230 230230
0.0600.1100.2600.260 0.3200.320
G5G5G5G5G5G5
>0.55>0.55>0.55>0.55>0.55>0.55
All dimensions are in mm
Lamp Type Length (L) Width (W) Height (H)
1x8W T5 FTL1x14W T5 FTL1x28W T5 FTL1x54W T5 FTL
385+2640+21240+21240+2
23+123+123+123+1
44.5+144.5+144.5+144.5+1
20
Consumer
Lighting
E-Lite Maglev DLX Popular
Top View
Front ViewL
Side ViewW
H
Extruded aluminium decorative ultra slim fixture without diffuser, snap on installers & domestic electronic ballast suitable for 14W/ 28W/ 54W T5 FTL.
Specification
HousingMade up of ultra slim extruded aluminium, powder coated with white finish.
End capsSilver colour clip-on end caps provided as standard upto 28W T5 FTL. Blue colour clip-on-end caps provided as standard for 54W T5 FTL.
Lamp holdersPush fit rotary type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, pre-fitted with lamp.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of snap-on installers provided.
ApplicationsResidencesCove lightingHospital premisesEducational institutionsCorridors
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF12114031LHDF12128032LHDF12154071
1x14W T5 FTL1x28W T5 FTL1x54W T5 FTL
230230230
0.1100.2600.320
G5G5G5
>0.55>0.55>0.55
Lamp Type Length (L) Width (W) Height (H)
1x14W T5 FTL1x28W T5 FTL1x54W T5 FTL
640±21240±21240±2
23±123±123±1
44.5+144.5+144.5+1
All dimensions are in mm
21
Consumer
Lighting
Item Code: LHBT03128032 Vin-240V, 50Hz, Iin-0.140A, P.F.-0.95 T5 Ez LampELECTRONIC BALLAST: 1x28W T5 FTL
N
P
1240±2
345±2
24±
144
±2
332±2Top View
612
47±
1
16.7
1128±2Front View
24±1Side View
E-Lite EZ Popular
Decorative ultra slim fixture with electronic ballast suitable for single 28W linear fluorescent lamp for indoor application only.
Specification
HousingMade up of ultra slim CRCA sheet steel.
FinishEpoxy coated white after phosphochromate treatment.
End capsSilver coloured clip-on end caps provided as standard.
Lamp HoldersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency HPF electronic ballast, less than 33% upto terminal block.
Not recommended for industrial 240V application.
MountingOn ceiling/ wall with screws or suspend by stainless steel suspension wire.
ApplicationsResidencesCove lightingHospital premisesEducational institutionsCorridors
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDT01128032 1x28W FTL T5 230 0.140 G5 >0.95
All dimensions are in mm
22
Consumer
Lighting
Rover Plus
Decorative shock proof slim extruded fixture with anti glare diffuser domestic electronic ballast, with CF technology suitable for only single 36W T8 FTL for domestic/ indoor application only.
Specification
HousingMade up of Extruded PVC section.
End capsMade of high grade ABS countered perfectly to match 36W T8 lamp profile.
DiffuserMethacrylate diffuser for glare free light.
FinishPVC off white finish.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gear Pre-wired with 230V rated high frequency electronic ballast, upto terminal block.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of snap-on installers provided.
ApplicationsResidencesSmall officesReception areasHospital premisesConference rooms
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF18136025 1x36W T8 FTL 230 0.160 G13 >0.90
32.7±1
63±
1
Front View1260±2
63±
1
Side View
All dimensions are in mm
23
Consumer
Lighting
Rover EZ
Sleek and decorative fixture with coloured end caps, domestic electronic ballast suitable for single 36W T8 linear fluorescent lamp for domestic/ indoor application only.
Specification
HousingMade up of CRCA sheet steel with a compact profile to suit 36W, T8 FTL.
End capsABS contoured coloured end caps perfectly to match 36W T8 lamp profile for better aesthetic.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gear Pre-wired with 230V rated high frequency electronic ballast upto terminal block.Luminaire is not suitable for 40W FTL (T12 : Ø 38mm) due to higher tube diameter.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of srews provided.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF21136025 1x36W T8 FT 230 0.160 G13 >0.90
All dimensions are in mm
33±
163
±1
63±
1
Top View
ELECTRONIC BALLAST 36 / 40W FTL (HPF)Ord. Code: LHBF13136025
Voltage : 23050 HzLamp Type : 1x36 / 40W FTLCurrent : 160mA(.) tc : 65˚C
STAR SLIMwith CF Technology
Front View
Side View
1260±2
24
Consumer
Lighting
Dreamlite Electronic
Specification
HousingMade up of CRCA sheet steel with a compact-profile to suit T8 36W lamp.
End capsAesthetically designed silver coloured clip-on end caps.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gear Pre-wired with 230V rated high frequency electronic ballast upto terminal block.Luminaire is not suitable for 40W FTL (T12 : Ø 38mm) due to higher tube diameter.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of srews provided.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
Decorative compact energy efficient luminaire with coloured end caps and HPF electronic ballast suitable for 36W T8 FTL.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF01118030LHDF20136025
1x18W T8 FTL1x36W T8 FTL
230230
0.0900.160
G13G13
>0.95>0.90
H
Side View
W
Front View
Top View
L
Lamp Type Length (L) Width (W) Height (H)
1x18W T8 FTL1x36W T8 FTL
612±21290±2
38±138±1
60.5+160.5+1
All dimensions are in mm
25
Consumer
Lighting
Rayzor Slim
Decorative sleek luminaries with domestic electronic ballast & engineering plastic end caps suitable only for 36W T8 FTL.
Specification
HousingMade up of CRCA sheet steel with decorative end profile caps.
End capsABS contoured perfectly to match 36W T8 lamp profile for better aesthetic.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp HoldersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic electronic ballast.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF32136025* 1x36W FTL T8 230 0.160 G13 >0.90
1265±2
62±
1
Front View
44±1Side View
*Not suitable for T12 FTL
All dimensions are in mm
26
Consumer
Lighting
Rayzor Electronic
Decorative luminaries with domestic electronic ballast & engineering plastic end caps suitable for T12 FTL.
Specification
HousingMade up of CRCA sheet steel with decorative end caps.
End capsABS contoured perfectly to match 40W T12 lamp profile for better aesthetic.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp HoldersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic electronic ballast.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
1272±2
Front View
75±
1
Side View60±1
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF31104025 1x40W FTL 230 0.160 G13 >0.90
All dimensions are in mm
27
Consumer
Lighting
Electra Slim
General purpose sleek and decorative strip type fixture with coloured end caps, electronic ballast suitable for single T8 linear fluorescent lamp for domestic/ indoor application only.
Specification
HousingMade up of CRCA sheet steel with decorative ABS coloured lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated electronic ballast upto terminal block, for ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF14104025 1x36W FTL 230 0.160 G13 >0.90
All dimensions are in mm
600
36±
1ELECTRA SLIMELECTRA SLIM
with CF TechnologyELECTRONIC BALLAST 36W FTLOrd. Code: LHBF09136025
Top View
Front View1235±3
68±
1
Side View
28
Consumer
Lighting
Electra Popular
General purpose strip type fixture with domestic electronic ballast suitable for single 36/40W FTL for domestic/ indoor application only.
Specification
HousingMade up of CRCA sheet steel with ABS lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated electronic ballast upto terminal block.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp socket
Power factor
LHDF15104025 1x36W FTL 230 0.160 G13 >0.90
All dimensions are in mm
600
47±
1
Front View
Top View
1230±2
Side View
ELECTRAELECTRONIC BALLAST
85±
2
29
Consumer
Lighting
600±2
ELECTRAELECTRONIC BALLAST 47
±1
Front View
Side View
Top View
1235±3
87±
2
General purpose decorative strip type fixture with coloured end caps, domestic electronic ballast suitable for single T8/ T12 linear fluorescent lamp for domestic/ indoor application only.
Electra
Specification
HousingMade up of CRCA sheet steel with decorative ABS coloured lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic electronic ballast upto terminal block.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
OrderingCode**
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF13104025 1x36/40W FTL 230 0.160 G13 >0.90
All dimensions are in mm
30
Consumer
Lighting
General purpose sleek and decorative strip type fixture with coloured end caps, electronic ballast suitable for single 28W T5 linear fluorescent lamp for domestic/ indoor application only.
Eurostrip
Specification
HousingMade up of CRCA sheet steel with decorative ABS coloured lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated electronic ballast upto terminal block, for ready to use.
Not suitable for industrial 240V application.
MountingFixed on wall/ ceiling with the help of screws.
ApplicationsStaircasesResidencesSmall officesCove lightingSociety parking areas
600
36±
1EURO STRIPwith CF Technology
tc-65ºC
ELECTRONIC BALLAST 28W T5Ord. Code: LHBT09128032
Top View
Front View1195±3
65±
1
Side View
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDT14128032 1x28W T5 FTL 230 0.260 G5 >0.55
All dimensions are in mm
31
Consumer
Lighting
Decorative compact energy efficient luminaire with anti glare diffuser & HF electronic ballast suitable for 36W FP-L.
Ezee Deluxe
Specification
HousingElegant, unbreakable polycarbonate body.
ReflectorReflector made up of high purity pre-anodised specular aluminium sheet.
DiffuserMethacrylate diffuser for better glare control.
Electric gear Wired with high frequency integral electronic ballast upto terminal block for input supply connection. Ready to use pre-fitted with 36W FP-L 6K lamp, packed in attractive gift box.
BenefitsHum free operation. Low voltage pick-up (130V). Hot re-lamping facility. High power factor (>0.95) Total Harmonic Distortion (THD<33%)
MountingFixed on wall/ ceiling with help of screws provided.
ApplicationsResidencesStudy roomsOffice cabinsRecreation hallsLounges & lobbiesHalls & reception areas
Top View
Front View460±2
Side View69±1
84.5
±2
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC15136072 1x36W FP-L 230 0.160 2G11 >0.95
All dimensions are in mm
32
Consumer
Lighting
Compact energy efficient luminaire with decorative end cover & HF electronic ballast suitable for 36W FP-L.
Ezee Popular
Specification
HousingElegant, unbreakable polycarbonate body with decorative end-cover made up of composite aluminium sheet in brush finish.
ReflectorMade up of white powder coated CRCA sheet.
Electric gear Wired with high frequency, 230V, integral electronic ballast upto terminal block for input supply connection. Ready to use pre-fitted with 36W FP-L 6K lamp, packed in attractive gift box.
Not suitable for industrial 240V application.
BenefitsHum free operation. Low voltage pick-up (130V). Hot re-lamping facility. High power factor (>0.95) Total Harmonic Distortion (THD<33%)EEI : A2
MountingFixed on wall/ ceiling with help of screws provided.
ApplicationsResidencesStudy roomsShow windowLounges & lobbiesHalls & reception areas
74
Top View
Front View470±2
Side View70±1
R35
70±
1
74±
1
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC16136025 1x36W FP-L 230 0.160 2G11 >0.95
All dimensions are in mm
33
Consumer
Lighting
Decorative compact luminaires suitable for 36W fluorescent parallel lamp for domestic/ indoor application only.
Liliput Electra
Front View
Top View
512±2
56±
182
±2
Specification
HousingMade up of CRCA sheet steel with self styled ABS ballast cover.
End capsWhite coloured ABS plastic.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V high frequency electronic ballast upto terminal block, packed in attractive gift box. Low voltage pick-up (130V)
MountingFixed on wall/ ceiling with the help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areasShops & establishments
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC15136025 1x36W FP-L 230 0.160 2G11 >0.90
All dimensions are in mm
34
Consumer
Lighting
Innova Grid 11 Watt
Specification
Compact Cool Spot Light ABS housing with silver finished. Anti-oxidant coated high purity aluminium, encapsulated reflector gives consistent bright light output. Mini spiral, tri-phosphor coated lamp tube ensures better lumen, longer lamp life, higher CRI and low temperatures. Available in options 3K & 6K.
Electronic Ballast Housing made up of ABS white case.Push fit type terminals for input supply and lamp connection.Lead wire with GU5.3 lamp holder.
FinishAvailable in silver finish.
AdvantagesSaves energy upto 85%.Very low heat generation.Longer lamp life(>8000 BH).Distance between source & object not limited.Ready to use complete set, attractively packed with cutout template.
MountingFixed into false ceiling with help of SS spring clips. Use cut-out template from packaging.
ApplicationsShowroomsRestaurantsBanquet hallsConference rooms
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC34111364LHOC34111664LHOC34211364LHOC34211664
1x11W MFL-3K1x11W MFL-6K2x11W MFL-3K2x11W MFL-6K
230230230230
0.0750.0750.1500.150
GU5.3GU5.3GU5.3GU5.3
>0.60>0.60>0.60>0.60
Aesthetically designed recessed grid fixture in silver finish with engineering plastic housing, domestic electronic ballast for 11W spotlight with spiral MFL for low ceiling height application.
Fixture not suitable for MR16 halogen lamp
All dimensions are in mm
Top View
Front ViewCut Out Size: 160x85 mm
178±2
95±
250
±2
95±2
95±
250
±2
Front ViewCut Out Size: 85x85 mm
Top View
35
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC34118664LHOC34218664
1x18W MFL-6K2x18W MFL-6K
230230
0.0800.160
GU5.3GU5.3
>0.90>0.90
Fixture not suitable for QR111 halogen lamp
Innova 111Grid 18 Watt
Aesthetically designed recessed grid fixture in silver finish with engineering plastic housing, domestic electronic ballast and center frosted glass diffuser for 18W spotlight with spiral MFL for low ceiling height application.
Specification
Compact Cool Spot Light ABS housing with silver finished. Anti-oxidant coated high purity aluminium, encapsulated reflector gives consistent bright light output. Mini spiral, tri-phosphor coated lamp tube ensures better lumen, longer lamp life, higher CRI and low temperatures. Available in 6K.
Electronic Ballast Housing made up of ABS white case.Push fit type terminals for input supply and lamp connection.Lead wire with GU5.3 lamp holder.
FinishAvailable in silver finish with centre frosted glass to reduce glare.
AdvantagesSaves energy upto 85%.Very low heat generation.Longer lamp life(>8000 BH).Distance between source & object not limited.Ready to use complete set, attactively packed with cutout template.
MountingFixed into false ceiling with help of SS spring clips. Use cut-out template from packaging.
ApplicationsShowroomsRestaurantsBanquet hallsConference rooms
Top View
Front ViewCut Out Size: 333x165 mm
362±2
190±
273
±2
All dimensions are in mm
190±2
190±
2
Top View
73±
2
Front ViewCut Out Size: 165x165 mm
36
Consumer
Lighting
Specification
Compact Cool Spot Light ABS base with ventilated openings ensures low temperatures. Anti-oxidant coated high purity aluminium, encapsulated reflector gives consistent bright light output. Mini spiral, tri-phosphor coated lamp tube ensures better lumen, longer lamp life and higher CRI. Available in options 3K & 6K.
Electronic Ballast Housing made up of ABS white case.Push fit type terminals for input supply and lamp connection.Lead wire with GU5.3 lamp holder.
FixtureAvailables in 7w silver and 11w white & silver.
AdvantagesSaves energy upto 85%.Very low heat generation.Longer lamp life(>8000 BH).Distance between source & object not limited.Ready to use complete set, attractively packed in blister pack with cutout template.
MountingFixed into false ceiling with help of twin quick fix SS spring clips. Use cut-out template from blister packaging.
ApplicationsShowroomsRestaurantsBanquet hallsConference rooms
45±
2
Top View
40±
2
36±
2
50±2Side View
23±
2
Front View
40±
2
70±2
80±2Top View
Front View84±2
25±
2
INNOVA SPOT LAMP
INNOVA BALLAST
INNOVA FIXTURE
Decorative energy efficient 7/11W spotlight with spiral miniature fluorecsent Lamp, domestic electronic ballast for low ceiling height application. An alternative for MR11/ MR16 lamp.
Innova Combo Pack
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
Innova 7W blister with Silver fixtureLHOC43107364LHOC43107664
Innova 11W blister with White fixtureLHOC44111364LHOC44111664
Innova 11W blister with Silver fixtureLHOC45111364LHOC45111664
1x7W MFL – 3K 1x7W MFL – 6K
1x11W MFL – 3K1x11W MFL – 6K
1x11W MFL –3K1x11W MFL – 6K
230230
230230
230230
0.0650.065
0.0750.075
0.0750.075
GU5.3GU5.3
GU5.3GU5.3
GU5.3GU5.3
>0.60>0.60
>0.60>0.60
>0.60>0.60
All dimensions are in mm
37
Consumer
Lighting
Innova 11 Watt Blister Pack
Specification
Compact Cool Spot Light ABS housing with silver finished. Anti-oxidant coated high purity aluminium, encapsulated reflector gives consistent bright light output. Mini spiral, tri-phosphor coated lamp tube ensures better lumen, longer lamp life, higher CRI and low temperatures. Available in options 3K & 6K.
Electronic Ballast Housing made up of ABS white case.Push fit type terminals for input supply & lamp connection.Lead wire with GU5.3 lamp holder.
FinishAvailable in silver finish with glass to reduce glare.
AdvantagesSaves energy upto 85%.Very low heat generation.Longer lamp life(>8000 BH).Distance between source & object not limited.Ready to use complete set, attractively packed with cutout template.
MountingFixed into Innova Grid 11W/ Innova Combo Pack.
ApplicationsShowroomsRestaurantsBanquet hallsConference rooms
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC43111364LHOC43111664
1x11W MFL 3K1x11W MFL 6K
230230
0.0750.075
GU5.3GU5.3
>0.60>0.60
Decorative energy efficient 11W spotlight with spiral miniature flourescent lamp, domestic electronic ballast for low ceiling height application.
45±
2
Top View
40±
2
36±
2
50±2Side View
23±
2
Front View
40±
2
70±2
80±2Top View
INNOVA SPOT LAMP
INNOVA BALLAST
All dimensions are in mm
38
Consumer
Lighting
Decorative energy efficient 18W spiral miniature fluorescent Lamp with domestic electronic ballast suitable for low ceiling height application.
Innova 111 18 Watt
Specification
Compact Cool Spot Light ABS base with ventilated openings ensures low temperatures. Anti-oxidant coated high purity aluminium, encapsulated concentrated beam reflector gives consistent bright light output. Mini spiral, tri-phosphor coated lamp tube ensures better lumen, longer lamp life and higher CRI. Available in options 3K & 6K.
Electronic Ballast Housing made up of ABS white case.Push fit type terminals for input supply and lamp connection.Lead wire with GU5.3 lamp holder.
AdvantagesSaves energy upto 85%.Very low heat generation.Longer lamp life (>8000 BH).Distance between source & object not limited.Ready to use complete set, attactively packed in blister pack with cutout template.
MountingCan be use with QR111/AR111 fixtures (Please order for fixture seperately).
ApplicationsShowroomsRestaurantsBanquet hallsConference rooms
23±
2
Front View
40±
2
70±2
80±2Top View
INNOVA SPOT LAMP
INNOVA BALLAST
Ø81
55.7
±2
Front ViewTop View
Ø110.8
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC33118364LHOC33118664
1x18W MFL-3K1x18W MFL-6K
230230
0.0800.080
GU5.3GU5.3
>0.90>0.90
All dimensions are in mm
39
Consumer
Lighting
Decorative recess, compact, fixed type energy efficient downlighter with electronic ballast suitable for 15W/ 23W/ 45W spiral CFL lamp GU10 base.
Innova Downlighter Fixed Type
Specification
HousingMade up of ABS white and reflector holding ring in ABS material in white finish.
ReflectorReflector made up of high purity pre-anodised specular aluminium sheet.
Electric gearWired with high frequency integral electronic ballast with push-fit type mains terminals for input supply connection. Pre-fitted with replaceable spiral CFL (6K) lamp as standard and packed in attractive gift box. Use single strand wire or multi-strand wire with thimble for supply connection.Lamp option also available in 3K.
MountingFixed into false ceiling with help of twin quick fix SS spring clips as per instruction manual provided. Use cut-out template from blister packaging. Suitable for false ceiling thickness upto 14mm.
ApplicationsShowroomsSmall officesShopping mallsResidential areasPassages & corridors
C
A
Top View
B
Front View
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC01115356LHOC01115663LHOC01123363 LHOC01123663LHOC01145363LHOC01145663
1x15W CFL-3K1x15W CFL-6K1x23W CFL-3K1x23W CFL-6K1x45W CFL-3K1x45W CFL-6K
230230230230230230
0.0600.0600.0950.0950.2100.210
GU10GU10GU10GU10GU10GU10
>0.90>0.90>0.90>0.90>0.90>0.90
Lamp Type A B C (Ø) Cutout Size
15W CFL23W CFL45W CFL
60±270±2100±2
120±2143±2185±2
95±2124±2176±2
86±2108±2147±2
Tolerance: +/- 2mm.
All dimensions are in mm
40
Consumer
Lighting
Decorative recess, compact, swivel, energy efficient downlighter with electronic ballast suitable for 13W/ 23W spiral CFL lamp GU10 base.
Innova Downlighter Swivel Type
Specification
HousingMade up of ABS white and reflector holding ring in ABS material in silver finish.
ReflectorReflector made up of high purity pre-anodised specular aluminium sheet.
Electric gearWired with high frequency integral electronic ballast and push-fit type mains terminals for input supply connection. Pre-fitted with replaceable, swivel, spiral CFL (6K) lamp as standard and packed in attractive gift box. Use single strand wire or multi-strand wire with thimble for supply connection.Lamp option also available in 3K.
MountingFixed into false ceiling with help of twin quick fix SS spring clips as per instruction manual provided. Use cut-out template from blister packaging.Suitable for false ceiling thickness upto 14mm.
ApplicationsShowroomsSmall officesShopping mallsResidential areasPassages & corridors
C
A
Top View
Front View
B
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC02113363LHOC02213663LHOC02123363LHOC02123663
1x13W CFL-3K1x13W CFL-6K1x23W CFL-3K 1x23W CFL-6K
230230230230
0.0550.0550.0950.095
GU10GU10GU10GU10
>0.90>0.90>0.90>0.90
Lamp Type A B D (Ø) Cutout Size
13W CFL23W CFL
60+270+2
106+2145+2
95+2124+2
86+2108+2
Tolerance: +/- 2mm.
All dimensions are in mm
41
Consumer
Lighting
Decorative, square shaped, recess mounted, horizontal wide beem downlighter with center frosted lense suitable for 1x15W retrofit CFL.
Neo 1
Specification
HousingMS powder coated silver finish frame with black powder coated MS bracket for holding reflector and lamp holder.Push type clip for opening glass and lamp replacement.
OpticsSpun aluminium, specular finish anodised reflector with hammered pattern on upper half and diamond pattern on lower half with center frosted lense for better glare control.
Lamp holdersB22-d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block mounted on adjustable frame.
Electric gearPre-wired upto terminal block for CFL operation.
Not recommended for industrial 240V application.
MountingFixed into false ceiling by means of 2 nos. SS spring clips provided as perinstruction.
ApplicationsResidencesSmall OficesShowroomsRestaurantsCorridors & passage
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC48115399 upto 1x15W (TU) retrofit CFL
230 0.075 B22 >0.85
All dimensions are in mm
180±2
85±
218
0±2
Top View
Front View
Ø170
42
Consumer
Lighting
Neo 2
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC47211399 upto 2x11W (TU) retrofit CFL
230 0.110 B22 >0.85
Decorative, square shaped, recess mounted, horizontal wide beem downlighter with center frosted lense suitable for 2x11W retrofit CFL.
Specification
HousingMS powder coated silver finish frame with black powder coated MS bracket for holding reflector and lamp holder.Push type clip for opening glass and lamp replacement.
OpticsSpun aluminium, specular finish anodised reflector with hammered pattern on upper half and diamond pattern on lower half with center frosted lense for better glare control.
Lamp holdersB22-d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block mounted on adjustable frame.
Electric gearPre-wired upto terminal block for CFL operation.
Not recommended for industrial 240V application.
MountingFixed into false ceiling by means of 2 nos. SS spring clips provided as perinstruction.
ApplicationsResidencesSmall OficesShowroomsRestaurantsCorridors & passage
All dimensions are in mm
Ø195
217
217±2
100±
2
Top View
Top View
43
Consumer
Lighting
Compact modular horizontal wide beam downlighter with glass diffuser suitable for 1x15W retrofit CFL.
Glider
Specification
HousingMade up of high grade CRCA sheet metal with adjustable lamp holder plate according to CFL length.
OpticsSpun aluminium, specular finish reflector with glass cover for diffused light.
FinishEpoxy powder coated white after phosphocromate treatment for rust free long life.
Lamp holdersB-22 with electrical grade copper contacts.
Electric gearPre-wired upto terminal block for CFL operation.
Not recommended for industrial 240V application.
MountingFixed into false ceiling by means of 2 nos. SS spring clips provided as per instruction.
ApplicationsResidencesHotel lobbiesStudy roomsDressing roomsHospital premisesCorridors & lobbies
Ø178.
5
Top View
Front View30
80±
2
226±2
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC49115399 upto 1x15W (TU) retrofit CFL
230 0.075 B22 >0.85
All dimensions are in mm
Ø150
44
Consumer
Lighting
DL 50
A compact vertical narrow beam downlighter suitable for incandescent lamp upto 60W or 11W (TU) retrofit CFL.
Specification
HousingMS powder coated silver/ white finish frame with black powder coated MS bracket for holding reflector and lamp holder.
OpticsSpun aluminium, specular finish reflector with diamond pattern on upper halfand vertical facets on lower half for better glare control.
Lamp holdersB22-d lamp holder with electrical grade copper contacts provided as standard,wired upto terminal block mounted on adjustable frame.
Electric gearPre-wired upto terminal block for CFL operation.
Not recommended for industrial 240V application.
MountingFixed into false ceiling by means of 2 nos. SS spring clips provided as perinstruction.
ApplicationsResidencesSmall OficesShowroomsRestaurantsCorridors & Passage
OrderingCode
Lamp Type
Nominal Voltage
(V)
Mains Current
(A)
Lamp Socket
Power Factor
LHOL01160399 (Silver)LHOL02160399 (White)
1x11W Retro CFL (TU)1x11W Retro CFL (TU)
230230
0.0550.055
B22-d B22-d
>0.85>0.8586
All dimensions are in mm
Ø112
77.5
96±
2
Top View
Front View
45
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC14118354 1x18W CFL/PL-C 240 0.145 G24 d-2 >0.55
DL 17 E
An integral compact vertical narrow beam downlighter suitable for single 18W non-retrofit CFL/PL-C for accentuating lighting effect.
Specification
HousingMS powder coated white finish frame with galvanised iron sheet bracket for holding reflector and lamp holders.
OpticsSpun aluminium, specular finish reflector with square pattern on top, diamond pattern for middle and vertical facets on lower portion for better glare control.
Lamp HolderWhite polycarbonate/ ABS lamp holder with electrical grade copper contacts.
Electric gearPre-wired with high frequency electronic ballast mounted on one of mounting legs upto terminal block.
MountingFixed into false ceiling by means of 3 nos. SS spring clips provided as per instruction.
ApplicationsShowrooms Restaurants Hotel lobbies Corridors & passage areas
120120
175±
2
Ø140±2
All dimensions are in mm
46
Consumer
Lighting
DL 15 E
A compact modular horizontal wide beam downlighter suitable for twin 18W non-retrofit CFL/PL-C.
Specification
HousingMS powder coated white finish frame with galvanised iron sheet bracket for holding reflector and lamp holders. OpticsSpun aluminium, specular finish reflector with circular pattern on top, diamond pattern for middle and matt finish on lower portion for better glare control.
Lamp HolderWhite polycarbonate/ ABS lamp holder with electrical grade copper contacts.
Electric gearPre-wired with high frequency electronic ballast upto terminal block.
MountingFixed into false ceiling by means of 2 nos. SS spring clips provided as per instruction.
ApplicationsShowroomsRestaurantsHotel lobbiesHigh ceiling areasØ192±2
206±2
Side View
90±
2
Top View
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC04218354 2x18W CFL/PL-C 240 0.290 G24 d-2 >0.55
All dimensions are in mm
47
Consumer
Lighting
Decorative, compact, recess mounted swivel downlighter in silver finish with HF electronic ballast & clear acrylic cover pre-fitted with GU10 base MFL.
Lonova Square
Specification
HousingHousing made up of white polycarbonate with mirror finish metalizing from inside. Premium finish square acrylic cover holding ring made up of ABS plastic with electroplating.
DiffuserClear acrylic optic cover for clean lamp compartment.
Lamp holdersGU 10 base white polycarbonate with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast, upto terminal block. Pre-fitted with spiral miniature fluorescent lamp (6K) as standard, Packed in attractive gift box.
MountingFixed into false ceiling with help of 2nos. quick fix SS spring clips as per instruction manual provided. Use cut-out template from gift box packing. Suitable for false ceiling thickness upto 14mm.
ApplicationsCell offices Cyber cafes Telephone kiosks Small clean rooms Stary night ceilings Hospitals/ OPD rooms Office corridors/ lobbies
C
D
E
Top View
Front ViewA
B
OrderingCode*
Lamp Type**
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC03103673LHOC03105673
1x3W MFL-6K1x5W MFL-6K
230230
0.0400.045
GU10GU10
>0.50>0.50
Lamp Type A B C D E Cutout Size(Ø)
3W CFL5W CFL
101120
7683
103105
7070
8396
6878
*For fixture with 3K lamp option change last three digits of ordering code to 373. **Suitable for 3K lamp.
All dimensions are in mm
48
Consumer
Lighting
*Suitable for 3K lamp.
Decorative, compact, recess mounted fixed downlighter in silver finish with HF electronic ballast & clear acrylic cover pre-fitted with GU10 base MFL.
Lonova Round
Side View
C
A
D
B
Specification
HousingHousing made up of white polycarbonate with mirror finish metalizing from inside. Premium finish round acrylic cover holding ring made up of ABS plastic with electroplating.
DiffuserClear acrylic optic cover for clean lamp compartment.
Lamp holdersGU 10 base white polycarbonate with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast, upto terminal block. Pre-fitted with spiral miniature fluorescent lamp (6K) as standard.
MountingFixed into false ceiling with help of 2nos. quick fix SS spring clips as per instruction manual provided. Use cut-out template from gift box packing.Suitable for false ceiling thickness upto 14mm.
ApplicationsCell officesCyber cafes Telephone kiosks Small clean rooms Stary night ceilings Hospitals/ OPD rooms Office corridors/ lobbies
OrderingCode
Lamp Type*
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC03107673LHOC03109673LHOC03111673
1x7W MFL-6K1x9W MFL-6K1x11W MFL-6K
230230230
0.0550.0730.095
GU10GU10GU10
>0.55>0.55>0.55
Lamp Type A B C D Cutout Size(Ø)
7W MFL9W MFL11W MFL
105130150
798198
113125135
707098
90113134
Tolerance: +/- 2mm.
All dimensions are in mm
49
Consumer
Lighting
Square shaped, recess, decorative luminaire with HF electronic ballast & translucent diffuser, pre-fitted with flat profile 9W/ 25W/ 30W CFL for diffused light.
Lonon Square
A
Top View
D
Front View
B
C
D
Specification
HousingHousing made up of white polycarbonate.
DiffuserSemi transparent, UV stabilized, polycarbonate patterned diffuser.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with integral high frequency electronic ballast, upto terminal block. Pre-fitted with flat base compact fluorescent lamp, with 6K colour temp. lamp as standard.
MountingFixed into false ceiling with help of 2nos. quick fix SS spring clips as per instruction manual provided. Use cut-out template from gift box packing.Suitable for false ceiling thickness upto 14mm.
ApplicationsApartments Living rooms Passage & corridors Small cabins & offices Restaurants &cafeterias Dining & recreational areas
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC68109670LHOC68125670LHOC68130670
1x9W CFL-6K1x25W CFL-6K1x30W CFL-6K
230230230
0.0600.1800.130
2GX152GX15/562GX15/88
>0.55>0.55>0.90
Lamp Type A B C D Cutout Size
9W CFL25W CFL30W CFL
120+2165+2210+2
122+2162+2212+2
57+269+275+2
160+2200+2250+2
142x122182x168232x218
*For fixture with 2700K lamp option change last three digits of ordering code to 370.
All dimensions are in mm
50
Consumer
Lighting
Round shaped recess decorative luminaire with HF electronic ballast & translucent diffuser, pre-fitted with flat profile 13W/ 32W CFL for diffused light.
Lonon Round
Specification
HousingHousing made up of white polycarbonate.
DiffuserSemi transparent, UV stabilized, polycarbonate patterned diffuser.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast, upto terminal block. Pre-fitted with flat base compact fluorescent lamp, Packed in gift box with 6K colour temp. lamp as standard.Lamp option also available in 3K.
MountingFixed into false ceiling with help of 2nos. quick fix SS spring clips as per instruction manual provided. Use cut-out template from gift box packing.Suitable for false ceiling thickness upto 14mm.
ApplicationsApartments Living rooms Passage & corridors Small cabins & offices Restaurants &cafeterias Dining & recreational areas
Bottom ViewB
Side ViewA
C
Lamp Type A (Ø) B C Cutout Size(Ø)
13W CFL32W CFL
152204
206232
6081
141170
*For fixture with 2700K lamp option change last three digits of ordering code to 370.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHOC69113370LHOC69113670LHOC69132370LHOC69132670
1x13W CFL-3K1x13W CFL-6K1x32W CFL-3K1x32W CFL-6K
230230230230
0.090 0.0900.1200.120
2GX8/442GX8/442GX12/602GX12/60
>0.55>0.55>0.90 >0.90
All dimensions are in mm
51
Consumer
Lighting
Square shaped surface mounting decorative luminaire with HF electronic ballast & translucent diffuser, pre-fitted with flat profile base lamp.
Lonon-Surface (Square)
Specification
HousingHousing made up of white polycarbonate.
DiffuserSemi transparent, UV stabilized, polycarbonate patterned diffuser.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast, upto terminal block. Pre-fitted with flat base fluorescent lamp, with 6K colour temp. lamp as standard.
Not recommended for industrial 240V application.
MountingFixed on wall/surface ceiling with help of 2nos. screws provided.
ApplicationsApartments Living rooms Passage & corridors Small cabins & offices Restaurants &cafeterias Dining & recreational areas
Bottom View204±2
204±
2
Side View
40.5
±1
OrderingCode
Lamp Type*
Nominal Voltage (V)
Mains Current (A)
Power Factor
LHDC70125670 1x25W CFL-6K 230 0.195 >0.55
*Suitable for 3K lamp.
All dimensions are in mm
52
Consumer
Lighting
Lonon-Surface (Round)
Round shaped surface mounted decorative luminaire with HF electronic ballast & translucent diffuser. Pre-fitted with flat profile base lamp.
Bottom View
Ø224+2
38±
2
224±2Side View
Specification
HousingHousing made up of white polycarbonate.
DiffuserSemi transparent, UV stabilized, polycarbonate patterned diffuser.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with integral high frequency electronic ballast, upto terminal block. Pre-fitted with flat base compact fluorescent lamp of 6K colour temp. lamp as standard.
Not recommended for industrial 240V application.
MountingFixed on wall/surface ceiling with help of 2nos. screws provided.
ApplicationsApartments Living rooms Passage & corridors Small cabins & offices Restaurants &cafeterias Dining & recreational areas
*Suitable for 3K lamp.
All dimensions are in mm OrderingCode
Lamp Type*
Nominal Voltage (V)
Mains Current (A)
Power Factor
LHDC71125670 1x25W CFL-6K 230 0.195 >0.55
53
Consumer
Lighting
Specification
HousingMade up of high grade CRCA sheet metal.
DiffuserPoly-propylene translucent diffuser for glare free light, aluminium rings to create nice ambience.
FinishEpoxy powder coated white after phosphocromate treatment for rust freelong life.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, for ready to use & packed in attractive gift box pre-fitted with lamp (6500K).
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws provided.
ApplicationsResidencesStaircasesStudy roomsDressing roomsHospital premisesCorridors & lobbies
Crown
Decorative round, wall/ ceiling mounted fixture with electronic ballast suitable for 22W circular fluorescent lamp for indoor applications.
All dimensions are in mm OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC74122670 1x22WCircular Lamp
230 0.100 G10q >0.95
Ø275
Top View
Front View
85±
2
275
54
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHKC05120099 upto 1x20W (TU) retrofit CFL
230 0.100 B22 >0.85
Korona 1
Asthetically designed circular shaped decorative wall/ ceiling light fixture suitable for 20W ( TU) retrofit CFL.
Specification
HousingMade up of high quality, high temperature resistant polycarbonate in black colour.
ReflectorMade up of high quality, high temperature resistant polycarbonate in white colour.
CoverCircular ring in full moon shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.
DiffuserPolycarbonate diffuser in opal matt finish for soothing light effect with enhanced UV stability and heat resistance.
Lamp holderB22 ceramic lamp holder with electrical grade provided as standard, wired upto terminal block.
Electric gearPre-wired upto terminal block for CFL operation.
MountingMounting by means of self-tapping screws provided with the fixture. Options provided in the mould of housing.
ApplicationsCorridorsWalkwaysEntrancesBoundary wallsStairways
All dimensions are in mm
Ø303
Top View
90±
2
Front View
55
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHKC06120099 upto 1x20W (TU) retrofit CFL
230 0.100 B22 >0.85
Korona 2
Asthetically designed circular shaped decorative wall/ ceiling light fixture suitable for 20W ( TU) retrofit CFL.
Specification
HousingMade up of high quality, high temperature resistant polycarbonate in black colour.
ReflectorMade up of high quality, high temperature resistant polycarbonate in white colour.
CoverCircular ring in half moon shape made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.
DiffuserPolycarbonate diffuser in opal matt finish for soothing light effect with enhanced UV stability and heat resistance.
Lamp holderB22 ceramic lamp holder with electrical grade provided as standard, wired upto terminal block.
Electric gearPre-wired upto terminal block for CFL operation.
MountingMounting by means of self-tapping screws provided with the fixture. Options provided in the mould of housing.
ApplicationsCorridorsWalkwaysEntrancesBoundary wallsStairways
All dimensions are in mm
Front View
Top View
Ø303
90±
2
56
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHKC07120099 upto 1x20W (TU) retrofit CFL
230 0.100 B22 >0.85
Ovale 1
Asthetically designed oval shaped decorative wall/ ceiling light fixture suitable for 20W ( TU) retrofit CFL.
Specification
HousingMade up of high quality, high temperature resistant polycarbonate in black colour.
ReflectorMade up of high quality, high temperature resistant polycarbonate in white colour.
CoverEllipse ring made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.
DiffuserPolycarbonate diffuser in opal matt finish for soothing light effect with enhanced UV stability and heat resistance.
Lamp holderB22 ceramic lamp holder with electrical grade provided as standard, wired upto terminal block.
Electric gearPre-wired upto terminal block for CFL operation.
MountingMounting by means of self-tapping screws provided with the fixture. Options provided in the mould of housing.
ApplicationsCorridorsWalkwaysEntrancesBoundary wallsStairways
All dimensions are in mm
235±2Top View
330±
2
Top View
90±
2
57
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHKC08120099 upto 1x20W (TU) retrofit CFL
230 0.100 B22 >0.85
Ovale 2
Asthetically designed oval shaped decorative wall/ ceiling light fixture suitable for 20W ( TU) retrofit CFL.
All dimensions are in mm
235±2Top View
330±
2
Front View
90±
2
Specification
HousingMade up of high quality, high temperature resistant polycarbonate in black colour.
ReflectorMade up of high quality, high temperature resistant polycarbonate in white colour.
CoverHalf ellipse ring made up of high quality, high temperature resistant polycarbonate in black colour, fixed to the housing with 4 nos. self tapping screws provided with the fixture.
DiffuserPolycarbonate diffuser in opal matt finish for soothing light effect with enhanced UV stability and heat resistance.
Lamp holderB22 ceramic lamp holder with electrical grade provided as standard, wired upto terminal block.
Electric gearPre-wired upto terminal block for CFL operation.
MountingMounting by means of self-tapping screws provided with the fixture. Options provided in the mould of housing.
ApplicationsCorridorsWalkwaysEntrancesBoundary wallsStairways
58
Consumer
Lighting
Candy
Decorative moulded body, round, wall/ ceiling mounted fixture with domestic electronic ballast & opaque diffuser pre fitted with circular 22W lamp.
Specification
HousingMade up of high grade CRCA sheet metal.
DiffuserPoly-propylene translucent diffuser for glare free light.
FinishEpoxy powder coated white after phosphocromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block and pre-fitted with lamp (6K).
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of screws provided.
ApplicationsKids roomResidencesStaircasesStudy roomsDressing roomsHospital premisesCorridors & lobbies
Ø300±2
Bottom View
Ø300±2
92±
2
Front View
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC72122670 1x22W Circular Lamp 230 0.100 G10q >0.90
All dimensions are in mm
59
Consumer
Lighting
Peacock
Decorative moulded body, round, wall/ ceiling mounted fixture with domestic electronic ballast opaque diffuser pre fitted with circular 22W round lamp.
Specification
HousingMade up of high grade CRCA sheet metal.
DiffuserPoly-propylene translucent diffuser for glare free light.
FinishEpoxy powder coated white after phosphocromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, pre-fitted with lamp (6K) for ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws provided.
ApplicationsResidencesStaircasesStudy roomsDressing roomsHospital premisesCorridors & lobbies
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC73122670 1x22W Circular Lamp 230 0.100 G10q >0.90
Ø285±2
Ø285±2
92±
2
Front View
Bottom View
All dimensions are in mm
60
Consumer
Lighting
Luna-4Pin
Decorative moulded body, round, wall/ ceiling mounted fixture with domestic electronic ballast suitable for twin 9W (4 pin) compact fluorescent lamp (w/o internal starter).
Top View
Front View
Ø270±2
56±
1
Specification
HousingMade up of high grade ABS.
DiffuserPoly-propylene translucent diffuser for glare free light.
FinishMatt finish white matching ABS body.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gearPre-wired with 230V rated high frequency electronic ballast, upto terminal block, for ready to use & pre-fitted with lamp (6500K).
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws provided.
ApplicationsResidencesStaircasesStudy roomsDressing roomsHospital premisesCorridors & lobbies
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC28209024 2x9W CFL (PL-S) 230 0.100 2G-7 >0.90
All dimensions are in mm
61
Consumer
Lighting
Matrix-4Pin
Side View
56±
2
Front View
200±2
200±
2Specification
HousingMade up of high grade ABS.
Diffuser Poly-propylene translucent diffuser for glare free light.
FinishMatt finish white matching ABS body.
Lamp holdersPush fit type white polycarbonate with phosphor bronze contacts.
Electric gear Pre-wired with 230V rated high frequency electronic ballast, upto terminal block and pre-fitted with lamp (6500K) ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with the help of screws provided.
ApplicationsResidencesStaircasesStudy roomsDressing roomsHospital premisesCorridors & lobbies
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC18109030 1x9W CFL (PL-S) 4 Pin 24-7
230 0.050 2G-7 >0.90
Decorative square moulded body, wall/ ceiling mounted fixture with domestic electronic ballast suitable for single special 9W compact fluorescent lamp (w/o internal starter).
All dimensions are in mm
62
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDL07150099 upto 1x15W (TU) retrofit CFL
230 0.075 B22 >0.85
Beetle
Asthetically designed decorative wall mounting fixture suitable for 15W (TU) retrofit CFL.
Specification
HousingMade up of high grade CRCA steel sheet, epoxy powder coated white after phosphochromate treatment.
ReflectorMade up of high purity pre anodised aluminium sheet.
DiffuserThermoformed methacrylate, UV stabilised, heat resistant acrylic cover in parabolic shape, opal finish for glare control and soothing light effect to create proper ambience.
Lamp holderB22 lamp holder in engineering plastic grade provided as standard.
Electric gearPre-wired upto terminal block for CFL operation.
MountingMounting by means of 4 nos. holes of dia 5.4mm for wall mounting byself-tapping screws provided with the fixture.
ApplicationsCorridorsWalkwaysEntrancesBoundary wallsStairways
All dimensions are in mm
200±2
160
252±
2
Top View107
91.5
±2
Front View
Side View
63
Consumer
Lighting
Wallbrite Electra
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC01218054 2x18W CFL - DU 230 0.290 G24 d >0.55
Wall mounted decorative indoor use luminaire with acrylic diffuser suitable for twin 18W (DU) 2 pin/4 pin CFL for soft light ambience.
Specification
HousingMade up of CRCA sheet steel.
DiffuserTextured methacrylate formed sheet.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with twin 230V rated 18/11W CFL electronic ballasts upto terminal block.
MountingMounting fixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesShops & establishments
90±
2
Front View
238±2
205±
2
Top View
All dimensions are in mm
64
Consumer
Lighting
Specification
HousingMade up of CRCA sheet steel.
DiffuserTextured methacrylate formed sheet.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersWhite polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with twin 230V rated 9/11W CFL open construction copper wound ferromagnetic ballasts upto terminal block.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesShops & establishments
Wall mounted decorative indoor use luminaire fitted with twin VPIT open coustruction ballast & acrylic diffuser suitable for 9W 2 pin PLS/CFL for soft light ambience.
Wallbrite
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC01209017 2x9W CFL (PL-S) 230 0.300 G23 >0.50
90±
2
Front View
238±2
205±
2
Top View
All dimensions are in mm
65
Consumer
Lighting
Specification
HousingMade up of high grade plycarbonate
DiffuserSelf screwed polycarbonate diffuser in opal finish for soothing light effect with enhanced UV stability & heat resistance.
Lamp HolderGlass filled engineering plastic B22d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block. Cable entry from rear wall-side for supply connection.
MountingWall mounted by means of mounting bracket with lugs & screws provided through Ø10 mm hole.
ApplicationsResidencesSmall officesShowroomsRestaurants Hotel corridors & lobbies
175±2
160±2
104±
117
2±2
Top View
Front View
Decorative wall light made up of poly carbonate suitable for retrofit CFL 15W (Spiral).
City 1 New
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDL02160099 Upto 1x15W CFL Retro (Spiral)
230 0.075 B22-d >0.85
* Unbreakable in normal condition
All dimensions are in mm
66
Consumer
Lighting
City 2 (New)
Decorative wall light made up of poly carbonate suitable for retrofit CFL 15W (Spiral).
Specification
HousingMade up of polycarbonate.
RefractorSelf scrow milky white refractor made up of high impact resistante & UV resistante poly-carbonate for better light distribution.
Lamp holderGlass filled engineering plastic B22d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block. Cable entry from rear wall-side for supply connection.
Electric gearPre wired with B22d lamp holder upto terminal block for supply connection. Cable entry from rear wall-side for supply connection.
MountingWall mounted by bracket with lugs & with the help of screws provided.
ApplicationsShowroomsRestaurantsResidential areasHotel corridors & lobbies
185±2
160±2
104±
117
2±2
Top View
Front View
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDL03160099 Upto 1x15W CFL Retro (Spiral)
230 0.075 B22-d >0.85
* Unbreakable in normal condition
All dimensions are in mm
67
Consumer
Lighting
City 3
187±2
Ø152
80±
1
57.5
Top View
245±
2
Front View
Decorative wall light made up of polycarbonate suitable for retrofit CFL 15W (Spiral).
Specification
HousingMade up of polycarbonate.
RefractorSelf screwed milky white refractor made up of high impact resistance, UV resistance poly-carbonate for better light distribution.
Lamp holderGlass filled engineering plastic B22d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block. Cable entry from rear wall-side for supply connection.
Electric gearPre wired with B22d lamp holder upto terminal block for supply connection. Cable entry from rear wall-side for supply connection.
MountingIndoor-wall mounted by bracket with lugs & with the help of screws provided.
ApplicationsStaircaseCorridors & lobbiesShowroomsRestaurantsHotel corridors & lobbies
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDL06160099 Upto 1x15W CFL Retro (Spiral)
230 0.075 B22-d >0.85
* Unbreakable in normal condition
All dimensions are in mm
68
Consumer
Lighting
Decorative Amphore shape post top lantern made up of poly carbonate suitable for single retrofit CFL upto 26W.
Athena 2 (Prismatic)
Specification
HousingMade up of polycarbonate.
RefractorRefractor made up of high impact resistant, UV resistant poly-carbonate Prismatic finish for better light distribution.
Lamp holdersGlass filled engineering plastic B22d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block. Cable entry from rear wall-side for supply connection.
Electric gear Pre wired with B22d lamp holder upto terminal block for supply connection.
MountingSuitable for post/ pole mounting of 60mm dia (max.) with the help of 2 screws provided.
ApplicationsLawns Gardens Pathways Court yards Decorative porch lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC12126099 upto 1x26W retrofit CFL 230 0.200 B22d >0.55
* Unbreakable in normal condition
Ø30
0
Top View
Front View
328±
2
300±4
OD=Ø144, ID=Ø67
All dimensions are in mm
69
Consumer
Lighting
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC11126099 Upto 1x26W retrofit CFL 240 0.200 B22-d >0.55
Athena 3 (Moon)
Crown shape post top lantern in soothing moon finish made up of poly carbonate suitable for upto 26W retrofit CFL.
Specification
HousingMade up of high quality polycarbonate.
RefractorRefractor made up of high impact resistante, UV resistante poly-carbonate frosted finish for better light distribution.
Lamp holderGlass filled engineering plastic B22d lamp holder with electrical grade copper contacts provided as standard, wired upto terminal block. Cable entry from rear wall-side for supply connection.
Electric gearPre wired with B22d lamp holder upto terminal block for supply connection. MountingSuitable for post/ pole mounting of 60mm dia (max.) with the help of 2 screws provided.
ApplicationsLawns Gardens Pathways Court yards Decorative porch lighting
Top View
Ø23
0
328±
2
Front ViewOD =Ø144, ID =Ø67
* Unbreakable in normal condition
All dimensions are in mm
70
Consumer
Lighting
Specification
HousingMade up of polycarbonate.
RefractorRefractor made up of high impact resistance, UV resistance poly-carbonate in opal finish for soothing light effect.
Lamp holdersB22d Engg. plastic lamp holder with electrical grade brass contacts.
Electric gear Pre wired with B22d lamp holder upto terminal block for supply connection.
MountingSuitable for post/ pole mounting of 60mm dia (max.) with the help of 2 screws provided.
ApplicationsLawns Gardens Pathways Court yards Decorative porch lighting
Athena 4 (Globe)
Decorative Sphere shape post top lantern, opal finish made up of high quality poly carbonate. Suitable for upto 26W retrofit CFL.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC13126099 upto 1x26W retrofit CFL 230 0.200 B22-d >0.55
Ø300
Top View
300±
2
OD=Ø144, ID=Ø67
Ø300Front View
* Unbreakable in normal condition
All dimensions are in mm
71
Consumer
Lighting
Specification
HousingMade up of high quality polycarbonate.
RefractorRefractor made up of high impact resistant & UV resistant poly-carbonate in opal finish for soothing light effect.
Lamp holderB22d Engg. plastic lamp holder with electrical grade brass contacts.
Electric gearPre wired with B22d lamp holder upto terminal block for supply connection. MountingSuitable for post/ pole mounting of 60mm dia (max.) with the help of 2 screws provided
ApplicationsLawns Gardens Pathways Court yards Decorative porch lighting
Ø247
Top View22
Front ViewOD=Ø144.5
ID=Ø67.7
258±
2
Athena 5 (Opal)
Mushroom shaped post top lantern suitable soothing opal finish made up of high quality poly carbonate. Suitable for upto 26W retrofit CFL.
* Unbreakable in normal condition
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDC14126099 Upto 1x26W retrofit CFL 240 0.200 B22-d >0.55
All dimensions are in mm
72
Consumer
Lighting
85±
1
47±1Side View
1230±2
Top View
Front View
Specification
HousingMade up of CRCA sheet steel with ABS lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic low loss open construction copper wound ferromagnetic ballast and universal starter (FSU) upto terminal block, for ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
General purpose strip type fixture suitable for single T8 / T12 linear fluorescent lamp for domestic/ indoor application only.
Super Strip
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF02104009 1x36/40W FTL 230 0.390 G13 >0.50
All dimensions are in mm
73
Consumer
Lighting
Specification
HousingMade up of CRCA sheet steel with decorative twin coloured ABS lamp holding end plates.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic low loss open construction copper wound ferromagnetic ballast and universal starter (FSU) upto terminal block, for ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areasPassages & Corridors
General purpose decorative strip type fixture with coloured end caps, suitable for single T8 / T12 linear fluorescent lamp for domestic/ indoor application only.
Estilo
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF22104009 1x36/40W FTL 230 0.390 G13 >0.50
600±2
47±
1
Top View1215±2
Front View1230±3
85±
2
Side View47±1
COPPER 40W
All dimensions are in mm
74
Consumer
Lighting
Decorative indoor use luminaries designed to match profile of only 40W (T12) FTL with VPIT open construction copper ballast.
Rayzor
Specification
HousingMade up of CRCA sheet steel with decorative end profile caps.
End capsABS contoured perfectly to match 40W T12 lamp profile for better aesthetic.
FinishEpoxy powder coated white after phosphochromate treatment for rust free long life.
Lamp HoldersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated domestic low loss open construction copper wound ferromagnetic ballast and universal starter (FSU) upto terminal block for ready to use.
Not recommended for industrial 240V application.
MountingFixed on wall/ ceiling with help of screws.
ApplicationsStaircasesResidencesSmall officesSociety parking areas
1272±2
75±
1
Front View
Side View60±1
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHDF31104009 1x40W FTL 230 0.390 G13 >0.50
All dimensions are in mm
75
Consumer
Lighting
70.5
3.9
60±1Top View
80±1Front View
R1.6
40±
1
23±
.57.
7
Manufactured By:Havells India Ltd.E-1, Sector-59, Noida-201 307. U.P. (INDIA)
L
N
1
2
3
4
Electronic Ballast for CFLItem Code:LHBC08113054
4 Pin
NL
Ballast1234 tc
2 Pin
1
4
LampLamp
Rated Voltage : 240V, 50HzLamp Type : 9/11/13W CFL/PL-CInput Current : 0.095AP.F. : > 0.55Case Temp.(tc) : 65oC
All dimensions are in mm
CFL Electronic Ballast
Compact, high frequency, energy efficient electronic ballast suitable for 2 pin & 4 pin CFL.
* Not suitable for FP-L
Specification
2 Pin/4 Pin CFL electronic ballast: Economical solution for energy saving in low voltage areas of rural India.Suitable for non-retrofit CFL. Rated Voltage : 240V/ 50Hz Power Factor (PF) : >0.55 Crest Factor (CF) : <1.80 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <140%Warm start
Advantages:Compact in size and energy efficient. Ideal for areas of low voltage pick-ups.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Wattloss (W)
Power Factor
LHBC08113054LHBC08118054
1x9/11/13W CFL1x18W CFL
240240
0.0950.145
2.02.5
>0.55>0.55
4Pin 2Pin
NL
Ballast1234
LampLamp
1
4
76
Consumer
Lighting
EL Star DX
Specification
El-star electronic ballast: Economical solution for enrgy saving in low voltage areas of rural India.Suitable for linear fluoresent lamp (T12/ T8) only in domestic circuit. Rated Voltage : 230V/ 50Hz Power Factor (PF) : >0.90 Crest Factor (CF) : <1.90 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <33%
Advantages:The ballasts are pre-wired, compact in size, energy efficient and with universal mounting holes for easy replacement of electromagnetic ballast. Ideal for areas of low voltage pick-ups.
Compact, high frequency, energy efficient ballast suitable for single 36/40W linear fluorescent lamp or 36W FP-L.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Wattloss (W)
Power Factor
LHBF17904025 1x36/40W FTL/FP-L 230 0.160 5.0 >0.90
120±2
30±
1
130±2Side View
40±
233
±2
Top View
For 1x36/40W FTL
For 1x36W FP-L
Electronic BallastL
N
Lamp
Electronic BallastL
N
Lamp
All dimensions are in mm
77
Consumer
Lighting
Signage Slim
Specification
Lamp holdersPush fit type white polycarbonate/ ABS with electrical grade brass contacts.
Electric gearPre-wired with 230V rated electronic ballast with ABS lamp holder for ready to use.
MountingFixed on surafce with the help of SS clamps which is provided.
Range available36W T8 FTL28W T5 FTL
ApplicationsGlow & SignboardsSuspension lightSmall officesCove lighting
Signage HF electronic ballast suitable for T5, T8 FTL, sleek ABS housing with lead in wires, lamp connec-tors & SS lamp holding clamps for easy installation for domestic use only.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHBF14136025LHBT10128032
1x36W FTL (HPF)1x28W T5 FTL
230230
0.1600.230
G13G5
>0.90>0.55
27
1197
27.4
253
Top View
ELECTRONIC BALLAST 36W FTLOrd. Code: LHBF13136025
with CF Technology• tc
SIGNAGESLIM
All dimensions are in mm
78
Consumer
Lighting
Star Slim (Electronic Ballast)
Compact, high frequency, energy efficient electronic ballast suitable for T5, T8 & T12 FTL for domestic use only.
Specification
T8/ T12 FTL Electronic ballast: Economical solution for energy saving in low voltage areas of rural India.Suitable for T8/ T12 FTL. Rated Voltage : 230V/ 50Hz Power Factor (PF) : >0.90 Crest Factor (CF) : <1.90 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <33%
T5 FTL Electronic ballast: Economical solution for energy saving in low voltage areas of rural India.Suitable for T5 FTL. Rated Voltage : 230V/ 50Hz Power Factor (PF) : >0.55 Crest Factor (CF) : <1.70 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <140%
Not recommended for industrial 240V application.
Advantages:The ballasts are pre-wired, compact in size and energy efficient Ideal for areas of low voltage pick-ups.
253
27.4
25.3
±1
Top View
Front View
Side View
ELECTRONIC BALLAST 36W FTL with CF Technology• tc
SIGNAGESLIM
Ord. Code: LHBF13136025
27.4±1
263±2
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Wattloss (W)
Power Factor
LHBF13136025LHBF11128032
1x36W FTL (HPF)1x28W T5 FTL
230230
0.1600.230
5.05.0
>0.90>0.55
All dimensions are in mm
79
Consumer
Lighting
Eco Signage
Signage HF electronic ballast suitable for T5, T8 FTL, sleek ABS housing with lead in wires.
Specification
T8 FTL Electronic ballast: Economical solution for energy saving in low voltage areas of rural India.Suitable for T8 FTL. Rated Voltage : 230V/ 50Hz Power Factor (PF) : >0.90 Crest Factor (CF) : <1.90 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <33%
T5 FTL Electronic ballast: Economical solution for energy saving in low voltage areas of rural India.Suitable for T5 FTL. Rated Voltage : 230V/ 50Hz Power Factor (PF) : >0.55 Crest Factor (CF) : <1.90 Output Frequency : 40-55 KHz Total Harmonic Distortion (THD) : <140%
Not recommended for industrial 240V application.
Mounting:One elliptical open slot of Ø 4 x 6 mm and another hole of Ø 4 mm at a distance of 135 mm.
Advantages:The ballasts are pre-wired, compact in size and energy efficient Ideal for areas of low voltage pick-ups.
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Wattloss (W)
Power Factor
LHBT11128032LHBF16136025
1x28W T5 FTL1x36W FTL (HPF)
230230
0.2300.160
5.05.0
>0.55>0.90
Top View
LFront View
H
WSide View
1.4 mm Thk
Lamp Type Length (L)
Width (W)
Height (H)
Mounting Distance
1x28W T5 FTL1x36W T5 FTL
144±2144±2
30±130±1
29±129±1
135135
All dimensions are in mm
80
Consumer
Lighting
Industrial grade vaccum impregnated (VPIT) ballast designed to be operated at 240V/50Hz mains supply.
CFL Copper Ballast
CD
WH
Top View
LSide View
Lamp
Ballast
Circuit for single7/9/11/13/18/26W2 Pin CFL
L
N
Lamp
Ballast
Circuit for single7/9/11/13/18/26W4 Pin CFL
S
L
N
Specification
• Compactinsize • Designedfor240V/50Hz.,ACsupply• Lowlosssiliconsteellamination• Superenamelledcopperwire• Vaccumimpregnated(VPIT)openconstruction • Lowwattloss • Betterheatdissipation• Humfreeoperation • Maximumwindingtemp.tw-120OC,Temp.rise.,Dt- 700 C• Longlife• ConformstoIS:1534(Part1)of1977
Ballast Type
Lamp Type
Length (L in mm)
Width (W in mm)
Height (H in mm)
CD (in mm)
LHBC19011017LHBC19013018LHBC19018020
1x9/11W CFL1x13W CFL)1x18W CFL
959595
424242
282828
858585
OrderingCode
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Wattloss (W)
Power Factor
LHBC19011017LHBC19013018LHBC19018020
1x9/11W CFL1x13W CFL1x18W CFL
240240240
0.1500.1650.220
6.06.09.0
>0.50>0.50>0.50
All dimensions are in mm
81
Consumer
Lighting
FTL Copper Ballast
Industrial grade vaccum impregnated (VPIT) ballast designed to be operated at 240V/ 50Hz mains supply.
Specification
• Compactinsize • Designedfor240V/50Hz.,ACsupply• Lowlosssiliconsteellamination• Superenamelledcopperwire• Vaccumimpregnated(VPIT)openconstruction • Lowwattloss(lessthan12W) • Betterheatdissipation• Humfreeoperation • Maximumwindingtemp.tw-1200 C, Temp. rise., Dt- 700 C• Longlife• ConformstoIS:1534(Part1)of1977
Ballast Type
Lamp Type
Length (L in mm)
Width (W in mm)
Height (H in mm)
CD (in mm)
LHBF19004011 1x36/40W FTL/FPL* 155 42 28 115/ 123
OrderingCode
Lamp Type
Nominal Voltage
(V)
Mains Current
(A)
Wattloss (W)
Power Factor
LHBF190040111x36/40W FTL/FPL2x18/20W FTL/FPL
240240
0.4300.410
12.012.0
>0.50>0.50
For Single tube of 18/20/36/40W FTL with universal starter (FSU)
For twin tubes of 18/20W FTL with 110V starter (FS2)
Cap
Lamp
S
Ballast
L
N
Cap
Lamp
S
Lamp
S
Ballast
L
N
CDTop View
LSide View
WH
All dimensions are in mm
Havells India Ltd.QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-4771000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
Regional & Branch Offices:
NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-4771000, Fax: 0120-4772000, Delhi: Tel: 011-47676700, 23888200, Fax: 011-47676750, 23888250, Chandigarh: Tel: 0172 4232400-401, Fax: 0172-4232403, Dehradun: Tel: 0135-6670202, Fax: 0135-6670203, Noida / Haryana: Tel: 0120-3055609 / 3055610, Fax: 0120-3055611, Ludhiana: Tel: 0161-4676001 / 6024, Fax: 0161-46766007, Jammu: Tel: 0191-2490424, Fax: 0191-2490405, Sri Nagar: Tel/Fax: 0194-2490431, Jaipur: Tel: 0141-3988210, Fax: 0141-2389024, Jodhpur: Tel: 0141-3914645, 3988210, Lucknow: Tel: 0522-2201032, 2200938, Kanpur: Tel: Airtel: 09935533751/52/53, 0512-2690128/129/130, Fax: 0512-2692800
EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851/52, Fax: 033-40127339, Bhubaneshwar: Tel: 0674-2598104, 2598105, 2598106, Fax: 0674-2598107, Guwahati: Tel: 0361-2134521, 2458923, Fax: 0361-2460355, Siliguri: Tel: 0353-2525907, Fax: 0353-3290402 (RIM), Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, Telefax: 0612-2655518
WEST - REGIONAL OFFICE: Mumbai: 302, Boston House, 3rd Floor Suren Road, CTS No. 260/261, Andheri (E) Mumbai-400093, Tel: 022-67298600-603, Ahmedabad: Tel: 079-40061111, 40060738-740, Fax: 079-40060741, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Fax: 0731-2551626, Rajkot: Tel: 0281-2481112, 2921212 Fax: 2481112, Nagpur: Tel: 0712-2224132, 2222692, 2222029, Pune: Tel: 020-64016413/14, Raipur: Tel: 0771-4243400 / 01, Telefax: 0771-4243402, Surat: Tel: 09979890137, Telefax: 0261-2350137, Jabalpur: Tel: 0761-4064491
SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18/3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-30240021-22, Fax: 044-28524326, Bangalore: Tel: 080-49075000, 9844085913, Fax: 080-25582663, Coimbatore: Telefax: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Fax: 040-27533211, Kochi: Tel: 0484-4099000, 2393165, 2393068, Fax: 0484-2393170, Vishakapatnam: Tel: 0891-6514339, Fax: 0891-2522547, Vizag: Tel: 0891-6514339, Fax: 0891-25522547, Vijayawada: Tel: 91+9247058847/57
Representative Offices:
• Goa • Solapur • Gwalior • Hubli • Davanagere • Gulbarga • Mysore • Trichy • Kathmandu • Sambalpur • Jalandhar • Bhopal • Calicut • Madurai • Trivandrum
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication.Specifications & performance data are constantly changing. Current details should therefore be checked with Havells Group.
LP/Z
HLR
C00
019/
DE
C11
Catalogue 2012-13
Consum
er Lighting Solutions 2012-13
ConsumerLighting Solutions