GALA TENTwww.galatent.com

®

Sales O"ce

Gala Tent Ltd.

Unit 10 Far"eld Park

Manvers

Rotherham

S63 5DB

CONTAINER

HOUSE

PTJ-8*20PPTJ-8*20Q

Checking & Packaging1. We carefully check each shipping list making sure there are no mistakes.

2. Packing

Option 1 – a standard container house packed in one #at pack, 4 sets combined

into one package. It can be shipped on board just as one 20ft shipping container.

The package will be protected by boards and wrapped in "lm.

Option 2 – mixed packaging; roof and chassis will be packed together with bolts.

All the wall panels packed together with a wooden pallet in the bottom,

corrugated boards on the surface, and XPS in the inner-space. It will be shipped

in a 40ft container.

Packing for Container House

Unloading1. Bulk Shipment

a. take out the small packages;

b. use fork lift to take out the wall panel packages;

c. rig the corner of the container house and drag

the package out

d. use fork lift to lift the container in the middle

and move it out of the the shipping containers

e. put the package on the ground sideways.

20FT SOC

A. Unbolt the container packages at the corners

B. sling one container package and lay on the #oor

C. Open the package by free the screws on four corners

D. Sling the roof

E. Take out the wall panels and other parts inside

F. Take o$ the steel bars at the four corners and the plywood

backplates.

Loading & Shipment1. Flat packs will be one package it can be shipped on board as one 20ft container.

2. Roof and chassis will be packed together with bolts. All the wall panels packed

together with a wooden pallet in the bottom, corrugated boards on the surface, and

XPS in the inner-space. It will be shipped in a 40ft container.

into one package. It can be shipped on board just as one 20ft shipping container.

ePacking for Container House

Unloading1. Bulk Shipment

a. take out the small packages;

b. use fork lift to take out the wall panel packages;

c. rig the corner of the container house and drag

the package out

d. use fork lift to lift the container in the middle

ve it out of the the shipping containers

e. put the package on the ground sideways.

20FT SOC

A. Unbolt the container packages at the corners

B. sling one container package and lay on the #oor

C. Open the package by free the screws on four corners

D. Sling the roof

E. Take out the wall panels and other parts inside

F. Take o$ the steel bars at the four corners and the plywood

backplates.

PACKAGING

SUPPORTING FACILITIES

ACCESSORIES

SUPPORTING FACILITIES

ACCESSORIES

Wall System SeriesStandard wood pattern wall panel

standard blue wall panel

Inner door standard wall panel

External door (steel security door) fitted in standard yellow panel

External door (steel security door) fitted in standard black pattern wall panel

External door (steel security door) fitted in standard blue wall panel

Window (PVC aluminium alloy window)

Bathroom ventilated window (PVC aluminium alloy window)

Introduction of the wall systemConsists of 0.42mm coloured steel sheets on both sides or one 0.42 coloured

sheet and one 0.42mm stainless steel sheet. Integrated with PU/EPS/ROCK WOOL etc.

The size of the wall is 2310mm” 1158mm. The thickness of the external wall is 75mm and

the internal wall is 50mm. The density of the EPS is 12kgm\m2 the density of the rock wool

is 120kg\m2. The colour of the wall is as per the clients demands.

Fame made of Q345 steel plate bended to profile, welded and galvanized.

Coated with anti-corrosive paint. Laying materials: laminated board, PVC

board, blockboard and cement fibre board.

Introduction of the chasis of the container house

Wall System SeriesStandard wood pattern wall panel

standard blue wall panel

Inner door standard wall panel

External door (steel security door) fitted in standard yellow panel

External door (steel security door) fitted in standard black pattern wall panel

External door (steel security door) fitted in standard blue wall panel

Window (PVC aluminium alloy window)

Bathroom ventilated window (PVC aluminium alloy window)

Introduction of the wall systemConsists of 0.42mm coloured steel sheets on both sides or one 0.42 coloured

sheet and one 0.42mm stainless steel sheet. Integrated with PU/EPS/ROCK WOOL etc.

The size of the wall is 2310mm” 1158mm. The thickness of the external wall is 75mm and

the internal wall is 50mm. The density of the EPS is 12kgm\m2 the density of the rock wool

is 120kg\m2. The colour of the wall is as per the clients demands.

Fame made of Q345 steel plate bended to profile, welded and galvanized.

Coated with anti-corrosive paint. Laying materials: laminated board, PVC

board, blockboard and cement fibre board.

Introduction of the chasis of the container house

SEMI-FINISHED PRODUCTS

Location: Quatar Location: Cyprus Location: New Caledonia Location: Canada

Location: Brazil Location: South Korea Location: Austria Location: Dubai

Location: USA Location: Mozambiqe Location: Iraq Location: South Africa

Location: New Caledonia Location: Canada

Location: Austria Location: Dubai

Location: Iraq Location: South Africa

Location: Finland

Quantity: 30 units

Type PTJ-8*20A PTJ-8*20I

PTJ-8*20M

Production: 25.11.2012

Specialised unit in the cold region

Bahrain

France: customer made exterior cladding.

Location: Finland

Quantity: 30 units

Type PTJ-8*20A PTJ-8*20I

PTJ-8*20M

Production: 25.11.2012

Specialised unit in the cold region

Japan Project: 60 units

Chile Project: 260 units

Indonesia Project: 92 units Iraq Project: 120 units

Japan Project: 60 unitsJapan Project: 60 units

Indonesia Project: 92 unitsIndonesia Project: 92 units

1. Corner Fittingmade of Q345B according to

the ISO standard, the same

as the shipping container, all

galvanized and wall painted.

2. BeamMade of Q345B once molded, all galvanized and

painted.3. Frame Solderingsealed soldering makes the frame more firm.

4. Frame PolishmentA polished frame makes the surface more

smooth and the paint evenly coated.

5. Painting WorkshopThe paint makes the container house

bright and fresh.

6. Installation of Wires.To make the inner space more attractive.

7. CollumnsAll stamped out by machine,accuracy guaranteed.

8. AssemblingAssembled precisely in the mold.

9. FlooringLaminated wood floor, beautiful and

comfortable.

MANUFACTURING

QUALITY

ASSURANCE

3. Frame Solderingsealed soldering makes the frame more firm.

4. Frame PolishmentA polished frame makes the surface more

smooth and the paint evenly coated.

5. Painting WorkshopThe paint makes the container house

bright and fresh.

6. Installation of Wires.To make the inner space more attractive.

7. CollumnsAll stamped out by machine,accuracy guaranteed.

1. Put the chassis level, put the

columns on thecorner, allign the

holes for screws, screw from

the upsides.

2. Put the roof on the columns, align the holes

for the screws on four corners, screw from

the downsides.

3. Firstly installthe long side wall panels, lean

the wall panels into the house

4. Fix all the wall panels

5. Install the internal decoration

7. Install the baseboard

6. Install the decoration rib on

the roof

2. Put the roof on the columns, align the holes

for the screws on four corners, screw from

the downsides.

3. Firstly installthe long side wall panels, lean

the wall panels into the house

4. Fix all the wall panels

5. Install the internal decoration

INSTALLATION

INSTRUCTIONS

Location: Venezuela

Quantity: 500 units

Type PTJ-8*20B PTJ-8*20C

PTJ-8*20D PTJ-8*20E

Production: 25.11.2012

Location: Venezuela

Quantity: 500 units

Type PTJ-8*20B PTJ-8*20C

PTJ-8*20D PTJ-8*20E

Production: 25.11.2012

CASE STUDY

Location: Gabon

Quantity: 300 unity

Type PTJ-8*20J

PTJ-8*20D PTJ-8*20E

Production: 25.11.2011

Location: Gabon

Quantity: 300 unity

Type PTJ-8*20J

PTJ-8*20D PTJ-8*20E

Production: 25.11.2011

CERTIFICATION

COMPANY

PROFILE

Gala Tent Ltd is a leader in the patent design and distribution of commercial

quality temporary modular structures. The company has the largest stock of tents,

marquees, commercial pop up gazebos, prefabricated heavy duty structures and

accessories in Europe and is actively expanding its range of products,

warehousing operations and services. Founded in September 1999, Gala Tent Ltd

is a multi-award winning company which revolutionised the commercial quality

temporary structure industry with their wide range of products. Gala Tent

was also in the vanguard of the online retail revolution, having had an active

e-commerce website since May 2000. In addition to direct sales to the general

public, Gala Tent Ltd is also the preferred contract supplier for many hire

companies, councils, military and branches of the emergency services.

Our factory and products have been veri"ed by Bureau Veritas

150 employees with over 30 engineers and 35 senior skilled workers

Professional FrameCAD from New Zealand specialising in Light Steel Villas

45,000 M2 building area, includes 2 workshops 35,000 M2 total

More than 100 sets of advanced production lines

Capacity for Steel Structure Houses: 100,000 M2

Capacity for Light Steel Villas: 80,000 M2

Capacity for Steel Container Houses: 3000 units

FACTORY OVERVIEW

ABOUT CONTAINER

HOUSE

The container house is a type of modular house, consisting of a

light steel frame and thermal installation material. It is a new

type of energy conservation and environment project for

housing which is easy and convenient to install. Currently the

container houses have been exported to more than 70 countries

all over the world such as Brazil, South

Africa, Dubai and Japan. It is widely used in construction sites,

temporary residence, shower rooms, kitchens, teaching buildings

and as military camou#age houses. It's servicelife can also last

more than 10 years.

Besides the standard 20 container houses, we also o$er 10, 16

and and 40 containers and other sizes depending on what you

require. What's more, the containers can be

combined and stacked up to a maximum of four tiers high and

combined with any amount necessary when built horizontally.

The fully weighted light steel frame is "rstly galvanized then

painted with anti-corrosive paints which make the house more

durable. The electrical wiring is "rst installed in the

roof which makes the installation more convenient and safe. As

for insulation you can choose between EPS, PU, ROCK WOOL/

DENSITY (120kg/m2).

The thickness of the external wall is 75mm or 100mm and

generally the partition board is 50mm. The window and door are

"tted on the wall panels, so you can easily adjust their position

by exchanging

the places of the wall panels, you can also add more windows

and doors. The bottom of the container house is "tted with fork

lift holes providing the option to move it.

The standard #oor is either PVC or laminated, in order to get

more comfortable living place, you can also add insulation such

as rock wool.

USAGE

Living room

we can also provide furniture

Office

High quality furniture is available

Kitchen

High quality cabinet, cooking appliances etc.

Cold Storage Room

well sealed 98% cold air kept in the house.

Public Shower Room

6 shower rooms in one 20ft container room

Toilet

6 toilets in one 20ft container

HOUSE TYPE