Stantec Architecture Ltd. 1100 - 111 Dunsmuir Street Vancouver BC V6B 6A3 Tel: (604) 696-8000 Fax: (604) 696-8100 Project: Relay T2626 Montreal Trudeau International Airport File No: 4.4 Owner: Craig Leask Project No: 144312087 LS Travel Retail North America Issued Date: March-18-13 370 King Street West, 6th Floor Toronto, On. M5V 1J9 Tel: (416) 863-6400 cc: No. of Pages: 12 Reference: CONTEMPLATED CHANGE NOTICE CCN/CO No: 01 The following items are Contemplated Changes to the Contract for this project, work is not to proceed unless authorized by a Change Directive or Change Order signed by the Owner. All materials and workmanship are to be in accordance with the Contract unless otherwise stated. Please submit an itemized quotation for changes to the Contract Price and Contract Time, within 5 Days of the date above. Title: T2626 Relay Domestic Reason: Changes to IFC drawings - requested by ADM A000 COVER SHEET - Revise drawing list A101 PARTION PLAN WALL SCHEDULE DOOR SCHEDULE - Add Frame Types see A101 - Revise door D2661-2 Height from 2100 to 1552 - Revise door D2661-2 Frame Type to Type 2 - Four sided A104 INTERIOR FINISH LIST - Revise Floor Transition TS-1 - Revise Wall Finishes WT-1 A200 REFLECTED CEILING PLAN - Delete wood ceiling at entrance around column - see A200 - Add Light Type 'H' and reposition spacing A201 CEILING DETAILS
Transcript
Stantec Architecture Ltd. 1100 - 111 Dunsmuir Street Vancouver BC V6B 6A3 Tel: (604) 696-8000 Fax: (604) 696-8100
Project: Relay T2626 Montreal Trudeau International Airport File No: 4.4
Owner: Craig Leask Project No: 144312087
LS Travel Retail North America Issued Date: March-18-13
370 King Street West, 6th Floor
Toronto, On. M5V 1J9
Tel: (416) 863-6400
cc: No. of Pages: 12
Reference:
CONTEMPLATED CHANGE NOTICE CCN/CO No: 01 The following items are Contemplated Changes to the Contract for this project, work is not to proceed unless authorized by a Change Directive
or Change Order signed by the Owner. All materials and workmanship are to be in accordance with the Contract unless otherwise stated. Please
submit an itemized quotation for changes to the Contract Price and Contract Time, within 5 Days of the date above.
Title: T2626 Relay Domestic
Reason: Changes to IFC drawings - requested by ADM
A000 COVER SHEET
- Revise drawing list
A101 PARTION PLAN WALL SCHEDULE DOOR SCHEDULE
- Add Frame Types see A101
- Revise door D2661-2 Height from 2100 to 1552
- Revise door D2661-2 Frame Type to Type 2 - Four sided
A104 INTERIOR FINISH LIST
- Revise Floor Transition TS-1
- Revise Wall Finishes WT-1
A200 REFLECTED CEILING PLAN
- Delete wood ceiling at entrance around column - see A200
1 EA. PULL PLATE IVES 8302-8-B26D-100mm X 450mm 630
CCN#01 - ADM REQUESTED CHANGES 13.03.18A
A
A104
INTERIOR FINISH LIST
PEART BERTRAND KOCH, ARCHITECTES
LOCATION MAP
Scale: 1:50
REFLECTED CEILING PLAN
T
U
U.5
2827 29
64
39
1. ALL CEILING HEIGHTS ARE FROM TOP OF FINISHED FLOOR TO UNDERSIDE OF FINISH CEILING OR LIGHT FIXTURE -
TYP. U.N.O.
2. THE TRADE CONTRACTOR SHALL SET ALL CEILING AND SOFFITS USING A LASER LEVEL TO ACHIEVE A CEILING THAT
IS PLUMB, LEVEL AND SQUARE TO ALL WALLS AND SOFFITS.
3. BRACING FOR SUSPENDED CEILING MUST BE PROVIDED BY CEILING CONTRACTOR. ANY ADDITIONAL HANGERS
AND SAFETY WIRES THAT MAY BE USED FOR LIGHT FIXTURES, DUCTWORK, SPEAKERS, ETC. TO BE THE
RESPONSIBILITY OF THE CEILING CONTRACTOR.
4. THE TRADE CONTRACTOR TO VERIFY W/LANDLORD, METHOD OF ATTACHMENT FOR ALL ITEMS ANCHORED TO, OR
SUSPENDED FROM EXISTING STEEL STRUCTURE.
5. ARCHITECTURAL DWGS DETERMINE THE LOCATION OF LUMINAIRES & SUPERSEDE ALL OTHERS, TYP. U.N.O. -
REFER TO ELECTRICAL DRAWINGS FOR EXACT FIXTURE TYPE & QUANTITIES PROVIDED.
6. REFER TO MECHANICAL DRAWINGS FOR EXPOSED SUSPENDED MECHANICAL DUCTWORK DISTRIBUTION SYSTEM.
7. PROVIDE ADEQUATE CLEARANCES FOR FIXTURES, DUCTS, CEILINGS AND RELATED PERTINENT ITEMS NECESSARY
TO MAINTAIN SPECIFIC HEIGHTS ABOVE FINISH FLOOR.
8. THE TRADE CONTRACTOR TO PROVIDE NECESSARY BLOCKING AND BRACING FOR FIXTURE INSTALLATION AND ALL
ELECTRICAL COMPONENTS TO COMPLETE THE FINAL INSTALLATION OF ALL FIXTURE - COORDINATE WITH FIXTURE
SUPPLIER.
9. DIMENSIONS ARE FROM FACE OF GWB TYP, U.N.O.
10. COORDINATE ADDITIONAL CEILING ACCESS DOORS W/ PROJECT MANAGER AND AS REQUESTED BY LANDLORD TO
MAINTAIN ACCESS TO LANDLORD EQUIPMENT.
11. ALL RIGID CONDUIT AND JUNCTION BOXES TO BE RUN TIGHT TO DECK IN A CLEAN AND ORDERLY FASHION.
12. ALL LIGHTING FIXTURE CALLED FOR TO BE REUSED MUST BE RE-LAMPED AS PART OF THE SCOPE OF WORK.
13. ALL ACCESS DOORS, DIFFUSERS, VENTS, RETURNS, ETC MUST BE PAINTED TO MATCH ADJACENT CEILING FINISH -
TYP.
1. LEASE LINE.
2. LINE OF SECURITY GRILLE.
3. INTERNALLY ILLUMINATED SIGNAGE BY SIGNAGE CONTRACTOR.
NOTES:
1. INSTALLATION OF LIGHTING FIXTURES SHALL BE ACCORDING TO MANUFACTURER'S RECOMMENDATIONS AND ACCORDING TO CODE REQUIREMENTS.
2. LAMPS SHALL BE AS SPECIFIED ABOVE - NO EXCEPTIONS.
3. CONTACT JOHN QUEEN AT 'QLCS' FOR PURCHASE OF LIGHTING FIXTURES AND LAMPS LISTED ABOVE. PHONE: 1-423-648-2039; FAX: 1-423-894-5172
4. LIGHTING DISTRIBUTOR TO PROVIDE ADDITIONAL LAMPS FOR FUTURE USE. COORDINATE QUANTITY WITH TENANT REP.
5. ELECTRICAL CONTRACTOR TO PROVIDE IDENTIFICATION NAMEPLATE ON THE ELECTRICAL SERVICE BREAKERS OF THE REMOTE ELECTRICAL PANEL. EACH NAMEPLATE SHALL BE 3 mm THICK
BLACK PLASTIC ETCHED IN A CONTRASTING COLOR WITH THE TENANT'S NAME. EACH PLATE SHALL BE PERMANENTLY AFFIXED TO THE DISTRIBUTION PANEL.
KEY NOTES
GENERAL CEILING NOTES
LIGHTING LEGEND
TYPE MFGR. CATALOG NUMBER DESCRIPTION LAMP TYPE REMARKS
A REGGIANA "ENVICS" REG39420RG132WW10 + REG36063 SURFACE MOUNTED 120V TRACK LIGHTING WITH DECORATIVE LOW
VOLTAGE ADJ. TRACK HEADS
32 W LED PROVIDE COMPLETE WITH ALL CONECTORS
AND END CAPS 120V
B CON-TECH P31AF-WW 2" RECESSED ADJUSTABLE LED PUCK LIGHT WITH 3000K LED, FLOOD
TYPE OPTICS AND 700mA DRIVER. (120V)
5 W LED
C JUNO SD6-1130-SAF2-825 6" VERTICAL RECESSED LED DOWNLIGHT WITH LOW IRIDESCENT HAZE
REFLECTOR, WHITE TRIM AND ELECTRONIC BALLAST (120V)
LED
D PHILIPS PHILIPS eW COVE QLX POWERCORE HIGH OUTPUT LINEAR COVE LIGHT, 305MM
LX 25MM H
LED
G XAL LIGHTING N661-123-00380-XXXX-X-X0 RECESSED TRIMMED ROUND FIXTURE WITH MILLED LAY IN LENS,
WHITE POWDER COATED ALUMINUM HOUSING.
T5
H LIGHTOLIER PB2T4 CALCULITE PROSPEC LINEAR DOWNLIGHT, BLACK HOUSING, T4.5 METAL
