Content Management System · test orders in a RIS (MWM) for specified patient IDs. Operating room...

Content Management System

Installation Guide

Before using the Content Management System, please read this manual thoroughly and retain it for future reference.

CMDS-MS10MD

4-568-844-11 (1)

© 2015 Sony Corporation

2

Documentation © 2015 Sony Corporation.All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation.

SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice.

About Trademarks• The software described herein may also be governed by

the terms of a separate user license agreement. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

• Apple, Macintosh, and the iPad name and logo are trademarks or registered trademarks of Apple Inc. in the U.S. and/or other countries.

• Wowza and related marks are either registered trademarks or trademarks of Wowza Media Systems, LLC.

• All other product names and brand names are registered trademarks or trademarks of their respective owners. Trademarked items are not indicated by ® or ™ symbols in this document.

Table of Contents 3

Table of Contents

Notice to Users ............................................4Product Overview and Specifications .......5

Overview....................................................... 5Main Applications ........................................ 5Product Configuration .................................. 5System Configuration ................................... 6Basic Specifications.................................... 10

Installing Software and Initial Setup........11Step 1: Installing Content Management

System (CMS core) on the CMS Server ................................................ 11

Step 2: Creating LDAP Users/Groups for Logging In to CMS ........................... 13

Step 3: Disabling the “cmsadmin” Default Account ............................................. 14

Step 4: Creating a Shared Folder on the CMS Server (Windows Server 2012 R2) and Specifying an NTP Server................. 14

Step 5: Configuring an HVO recorder........ 17Step 6: Configuring a Master Server in

[Server Settings] on the [Admin Tool] Screen ................................................ 18

Step 7: Configuring a Recorder and HVO Watch Folder on the CMS [Admin Tool] – [Importer] Screen ........................... 18

Step 8: Configuring Network Cameras....... 18Step 9: Configuring the Streaming

Server ................................................ 19Step 10: Configuring [Operating Rooms] in

[System Settings] on the [Admin Tool] screen................................................. 20

Installing CMS Metastamper and Initial Setup....................................................20Step 1: Installing CMS Metastamper on a

PC...................................................... 20Step 2: Initial Setup of CMS

Metastamper ...................................... 21Uninstalling Software................................22

Uninstalling Content Management System (CMS core)........................................ 22

Uninstalling CMS Metastamper ................. 22

Starting and Exiting the Software............22Starting and Logging In .............................. 22Logging out and Exiting ............................. 23

Admin Tool Screen ...................................24System Analysis........................................25

System Analysis Tab .................................. 25Server Settings..........................................26

LDAP Server Tab ....................................... 26Master Server Tab....................................... 27Import Server/Recording Server................. 28

System Settings ........................................29General Settings Tab................................... 29Metadata Tab .............................................. 31Operating Rooms Tab................................. 34Transcoder Tab ........................................... 37Importer Tab ............................................... 39Exporter Tab ............................................... 43

User/Group and Role Settings .................44Users/Groups Tab ....................................... 44Roles Tab .................................................... 48

Monitoring Jobs ........................................49Job Tab........................................................ 49

Checking Logs ..........................................52Operation Log Tab...................................... 52System Log Tab.......................................... 53

CMS Metastamper Settings......................54.ini File Settings .......................................... 54Config Settings ........................................... 55Reader Settings ........................................... 56

Appendix....................................................57Metadata Paths in Metastamper and HVO

Metadata Files ................................... 57Supported Network Cameras and Camera

Servers (connectivity verified) .......... 60About Account Roles.................................. 61

4

Notice to Users

• Always make a test recording, and verify that it was recorded successfully.SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.

• Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.

• SONY WILL NOT BE LIABLE FOR THE LOSS, REPAIR, OR REPRODUCTION OF ANY DATA RECORDED ON THE INTERNAL STORAGE SYSTEM, RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS.

• SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

• SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.

• Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely.

• Communication content may be unknowingly intercepted by unauthorized third parties in the vicinity of the signals. When using wireless LAN communication, implement security measures properly to protect the communication content.

• Communication content may be unknowingly intercepted by unauthorized third parties in the vicinity of the signals. When using wireless LAN communication, implement security measures properly to protect the communication content.

Software display examplesNote that the displays shown in the Installation Guide are explanatory examples. Some displays may be different from the ones that appear in actual use.

Notice to Users

Product Overview and Specifications

Overview

The Content Management System (CMS) is a system for centralized management of image/video content of surgical procedures that are performed in a hospital.Surgical procedures performed in an operating room can be distributed live, and can be viewed by multiple users.The CMS can also be used to search, view, and edit archived content (CMS for PC only).This document describes the settings configured by an administrator user.

Related manualsFor details about operation by general users, refer to the Content Management System user’s guide.

Main Applications

Live distribution of operating room picturesLive distribution of operating room pictures allows multiple users to view the medical procedure.

Centralized management of image filesStores image data recorded on devices, such as HVO-series Medical Recorders, on the Content Management System server for centralized management.

Video on demandVideos stored on the Content Management System server can be viewed when requested by users.

Image data sharing/referenceImage data can be shared or referred between users, or can be used for education and training of medical personnel.

Network browser-based user interfaceGeneral users can view image data in a browser running on client PCs on the network.Administrators can access administrator-only screens in a browser to make required settings.

Video editing by general usersGeneral users can be granted access privileges to edit video.

CMS MetastamperCMS Metastamper is supplied as standard for acquiring test orders in a RIS (MWM) for specified patient IDs.Operating room personnel can select patient information in the CMS Metastamper list, and control video recording of surgical operations using CMS Metastamper recording buttons.

This software is not designed for diagnostic function use, and does not provide a DICOM viewer function.

Product Configuration

Content Management System (CMS) comprises the following two software.

Note

Product name Model name

Description

Content Management System (CMS core)

CMDS-MS10MD

Core product used for live distribution of pictures and recording, managing, viewing, transcoding, and downloading of image data content (video and still images) and other files.

This product includes CMS Metastamper.

Content Management System (recording module)

CMDT-RS10MD

Optional product for expanding the number of inputs for live recording.

Tip

5Product Overview and Specifications

System Configuration

Standard configuration example

Serial

Operating area camera (IP camera)

Operating room camera

Laparoscope (endoscope) system

Medical recorderHVO series

SDI

RIS(MWM)

Ethernet switcher

LDAP (Active

Directory) server PACS

Viewing terminal (PC)

Browser

Wi-Fiaccesspoint

Content Management SystemCMDS-MS10MD (CMS core)

Administration terminal PC

Browser

Viewing terminal (iPad)

Application



SDI

SDI/IP conversion

encoder

SDI

CMS Metastamper

6 Product Overview and Specifications

Live recording input expansion configuration example

Serial

Operating area camera (IP camera)


CMS Metastamper

Laparoscope (endoscope) system


SDI

RIS(MWM)

Ethernet switcher

LDAP (Active

Directory) server PACS


Browser


Browser


Application

Wi-Fiaccesspoint

Content Management SystemCMDS-MS10MD (CMS core)


Browser

Expansion systems

Content Management SystemCMDT-RS10MD

(recording module)


ApplicationWi-Fi

accesspoint



SDI

SDI

SDI/IP conversion

encoder


8

Flow from recording to viewing

Selecting/checking patient information and recording (using CMS Metastamper)

aEnter the patient ID.Search for RIS (MWM) test order.

bSelect patient ID from the search results.

cCheck patient information and begin recording.

dStop recording.

eRecorded image data is saved in CMS as MP4 files.

fSelect and view image data on a viewing terminal (PC or iPad).

1 to 4

5

6

RIS(MWM)

CMS MetastamperTouch panel PC

Patient ID

Order

CIFSPatient information(Patient ID, patient name, surgeon name, etc.)

RTMPHLSCIFS


DICOM


Hardware/software configuration and functionsThis section describes the function of CMS and related hardware and software.

Hardware Software Function

Content Management System

CMDS-MS10MD(CMS core software)

Streaming distribution of operating room pictures.Recording and managing image data content (video and still images) and other files. Transcoding of image data (video and still image) files for PC/iPads, and creating files for preview.Displaying list of contents on PC/iPads for viewing.Employs LDAP (Active Directory) server link authentication for user authentication.

CMDT-RS10MD(recording module software)

Expanding the number of inputs for live recording (optional product).This software is installed on a different server than CMS.


Browser Administration PC running the CMS user interface (GUI) for managing users, registering content, and managing distribution.

Viewing terminal (PC) Browser Terminal for viewing CMS content.

Viewing terminal (iPad) Native application Terminal for viewing CMS content.

Recorder – Recording surgical operation, encodes files, and transfers files to CMS.

CMDT-RS10MD(streaming capture software)

Capturing streams from IP cameras and encodes files.

Radiology Information System (RIS)

Modality Worklist Management (MWM)Modality Performed Procedure Step (MPPS)

Provides worklist information and patient information data coordination in response to queries from Metastamper.

LDAP (Active Directory) server

– Used for CMS user authentication.

Metastamper CMS Metastamper Acquires metadata (patient information) and attaches metadata to HVO files.

Picture Archiving Communications System (PACS)

– Stores DICOM still images from CMS.


10

Basic Specifications

Recommended hardware specifications

File import specifications

Streaming transmission specifications

Item Standard specification

CMS core OS Windows Server 2012 R2

Hardware Xeon E5-2660 v3, 2.60 GHz,10-core CPU (2)

Memory 32 GB

Hard disk capacity

Data area (RAID 6) (32 TB)System area (RAID 1) (4 TB)

Recommended server

HP DL380 Gen9

Streaming server/Recording server

OS Windows Server 2012 R2

Hardware Xeon E5-2660 v3, 2.60 GHz,10-core CPU (2)

Memory 16 GB

Hard disk capacity

Data area (RAID 6) (32 TB)System area (RAID 1) (4 TB)

Recommended server

HP DL380 Gen9


OS Windows 7 Pro, Windows 8 or 8.1 Pro 32/64 bitMac OS X 10.9/10.10

Hardware Minimum required for above OS operationMemory

Hard disk capacity


OS iOS 7, 8

Hardware iPad (4th generation), iPad Air, iPad Air 2, iPad mini 2, iPad mini 3

CMS Metastamper

OS Windows 7 Pro, Windows 8 or 8.1 Pro 32/64 bit

Hardware Minimum required for above OS operationMemory

Hard disk capacity

Barcode reader

Motorola LS2208

Card reader Denso Wave (MAXLink)SRU-300MKII-K series


Video files Format MP4

Image compression

AVC/H.264

Audio compression

AAC

Still image files

Format BMP, JPEG, PNG, MPO


CMS t viewing terminal (PC)

Image compression

AVC/H.264

Audio compression

AAC

Network protocol

RTMP

CMS t viewing terminal (iPad)

Image compression

AVC/H.264

Audio compression

AAC

Network protocol

HLS


Installing Software and Initial Setup

Install the software and configure the initial setup when using the software for the first time.

Step 1: Installing Content Management System (CMS core) on the CMS Server

PrerequisitesCheck the following conditions before starting installation.• Apache and PostgreSQL are not running• Check that the following ports used by CMS are not in

use.

• Set firewall settings to allow access on the following ports used by CMS.

Installing

1 Right-click Setup.exe for CMS, and select [Run as administrator].

If the [User Account Control] dialog appears, click the [Yes] button.

2 Select the interface language on the [Choose Setup Language] screen and click [Next].

3 Click the [Install] button.

This screen is not displayed if the related software has already been installed.

The CMS installer screen appears.

Step Operation See page

1 Installing Content Management System (CMS core) on the CMS server

page 11

2 Creating LDAP users/groups for logging in to CMS

page 13

3 Disabling the “cmsadmin” default account

page 14

4 Creating a shared folder on the CMS server (Windows Server 2012 R2) and specifying an NTP server

page 14

5 Configuring an HVO recorder page 17

6 Configuring a master server in [Server Settings] on the [Admin Tool] screen

page 18

7 Configuring a recorder and HVO watch folder on the CMS [Admin Tool] – [Importer] screen

page 18

8 Configuring network cameras page 18

9 Configuring the streaming server page 19

10 Configuring [Operating Rooms] in [System Settings] on the [Admin Tool] screen

page 20

Port No. Application

80 Operation screen

1935 Video distribution

8084 Internal use by CMS server

8085 Internal use by CMS server

Port No. Application

80 Operation screen

1935 Video distribution

Tip

Tip

11Installing Software and Initial Setup

12

4 Click the [Next] button.

The [End User License Agreement] screen appears.

5 Select [I accept the agreement], and click the [Next] button.

The [Enter License] screen appears.

6 Enter your [License Number] and [Install Key], and click the [Next] button.

The [Installation Preparation Completed] screen appears.

7 Click the [Install] button.

The installation starts.When installation finishes, the [Installation Completed] screen appears.

8 Click the [Finish] button.

Installation is completed.After installation, a “cmsadmin” default account is automatically created.Use the default account when logging in to CMS for the first time.


Step 2: Creating LDAP Users/Groups for Logging In to CMS

You can log in to CMS using the default account created in Step 1 (page 11). The default account is a temporary account used for initial login.

1 Enter the URL of the CMS in a browser.

http://[CMS_server_address]/mvs/ Ask an administrator for the CMS server address.

The CMS login screen appears.

2 Enter the user ID and password for the default account created in Step 1 (page 11).

User ID: cmsadminPassword: Hvo2Cms

3 Click the [Login] button.

The [Admin Tool] screen appears.

The CMS operation screen is not displayed when logged in using the default account.

4 Click the [Server Settings] tab on the [Admin Tool] screen.

5 Click the [LDAP Server] tab sub item.

The [LDAP Server] settings screen appears.

6 Configure user information on the LDAP server for use in CMS.

For details about configuration, see page 26.This configuration allows you to register LDAP users in CMS with CMS user settings.

7 Click the [Users and Groups] tab on the [Admin Tool] screen.

8 Click the [Users/Groups] tab sub item.

The [Users/Groups] screen appears.

9 Register a user or group.

For details about registering, see page 44.

Register a user with Integrator role.

10 Check that you can log in to CMS using the user registered with Integrator role.

Tip

cmsadmin

Hvo2Cms

Note


14

Step 3: Disabling the “cmsadmin” Default Account

After registering LDAP users/groups in Step 2 (page 13), disable the default account.

The default account should be disabled for security purposes.

1 Open the “cms.ini” file using a Windows text editor, such as NotePad.

File storage location:C:\Program Files\Sony\Content Management System\cms\conf

2 Delete the rootUserCredential value (portion following the “=” symbol).

rootUserCredential =

3 Save to overwrite the file.

4 Select [Control Panel] – [All Control Panel Items] – [Administrative Tools] – [Services] in Windows.

5 Restart [Sony CMS Framework].

Step 4: Creating a Shared Folder on the CMS Server (Windows Server 2012 R2) and Specifying an NTP Server

The recorded material from a HVO recorder is saved to a shared folder on the CMS server (Windows Server 2012 R2). Image data can be viewed, searched, and edited by importing recorded material saved in the shared folder on the CMS server.This step creates and configures the shared folder, and specified an NTP server.

The shared folder is created in Windows Server 2012 R2.

1 Select [Control Panel] – [All Control Panel Items] – [User Accounts] – [Manage another account] in Windows Server 2012 R2.

2 Click [Add a user account] on the [Manage Accounts] screen.

The [Add a user] screen appears.

Note

Tip


3 Add a user for sharing.

The user added in this step is used when configuring the following settings.• When creating a shared folder• When configuring the HVO recorder output folder

(watch folder) (page 17)

This document uses “Share” as the user name for sharing as an example.

4 Right-click anywhere on the CMS server (Windows Server 2012 R2), and select [New] – [Folder] from the context menu.

The New Folder dialog appears.

5 Save the folder with the desired folder name.

6 Right-click the folder, and select [Properties] from the context menu.

7 Click the [Advanced Sharing] button on the [Sharing] tab of the [Properties] dialog.

8 Place a check mark in the [Share this folder] checkbox in the [Advanced Sharing] dialog.

9 Enter the share name of folder in [Share name].

Example: Target1

10 Click the [Permissions] button.

The [Permissions] dialog appears.

11 Click the [Add] button.

The [Select Users or Groups] dialog appears.

12 Enter the user name for sharing (for example, “Share”) specified in step 3 (page 15) in [Enter the object names to select], then click the [Check Names] button.

The path of the user for sharing is displayed in [Enter the object names to select].

Tip


16

13 Click the [OK] button.

The user for sharing added in the [Permissions] dialog is displayed.

14 Place a check mark in the [Allow] checkbox for [Full Control], and click [OK].

15 Click the [Edit] button on the [Security] tab of the [Properties] dialog.

16 Click the [Add] button, and add “cmsmanager.”

17 Place a check mark in the [Allow] checkbox for [Full Control].

18 Select [Everyone] and click the [Remove] button.


20 Click the [OK] button in the [Advanced Sharing] dialog.

21 Click the [OK] button in the [Properties] dialog.

22 Specify a Windows Server 2012 R2 NTP server.


Step 5: Configuring an HVO recorder

The following configuration is performed using the menu of the HVO recorder.• Setting the shared folder as the HVO recorder output

folder• Configuring the NTP server• Encrypting metadata

For details about menu operations on the HVO recorder, refer to the operating instructions for the HVO recorder.

Setting the shared folder as the HVO recorder output folder

1 Press the [MENU] button on the front panel of the HVO recorder.

The menu appears on the display.

2 Click [Settings] on the menu screen.

3 Select the [System Admin Settings] button on the screen.

The [System Admin Settings] screen appears.

4 Select the [Network Settings] button on the screen.

The [Network Settings] screen appears.

5 Select the [File Server] tab on the [Network Settings] screen.

6 Configure the following settings on the [File Server] tab.

7 Select the [Apply] button.

Configuring the NTP server






4 Select the [Network Settings] button on the screen.

The [Network Settings] screen appears.

5 Select the [NTP] tab on the [Network Settings] screen.

6 Configure the following settings on the [NTP] tab.


Encrypting metadata






4 Select the [Initial User Settings] button on the screen.

The [Initial User Settings] screen appears.

5 Select the [Save] tab of the [Initial User Settings] screen.

6 Select the [Advanced] button on the [Save] tab.

Tip

Item Setting

Server Select [Share (CIFS)] or [Common Setting (Share)} from the list.

Server Name

Enter the IP address of the recorded material output server (Windows 2012 R2 server).

Share Name

Enter the share name specified in Step 4 (page 14).Example: Target1

User Name

Enter the user name for sharing specified in Step 4 (page 14).Example: Share

Password Enter the password of the user name for sharing specified in Step 4 (page 14).

Item Setting

NTP Select [Use].

Address Enter the address of the time server.

Port No. Enter the port number of the time server.


18

7 Configure the following items.


Step 6: Configuring a Master Server in [Server Settings] on the [Admin Tool] Screen

1 Configure the master server as described on page 27.

Step 7: Configuring a Recorder and HVO Watch Folder on the CMS [Admin Tool] – [Importer] Screen





Log in to CMS using the CMS user created in Step 2 (page 13).The [Archive] case list screen appears.

3 Click the (Administrator) button at the top right of the screen.

The [Admin Tool] screen appears in a separate browser tab.

4 Click the [System Settings] tab on the [Admin Tool] screen.

5 Click the [Importer] tab sub item.

The [Importer] screen appears.

6 Click the (Edit) button to invoke edit mode.


The [Add Importer Setting] dialog appears.

8 Click the [General] tab.

Configure the recorder as described in step 4 on page 39.

9 Click the [Metadata] tab of the [Add Importer Setting] dialog.

Specify the metadata as described in step 7 on page 40.

10 Click the [Save] button.

The settings are saved.

11 Check that the specified recorder is displayed on the [Importer] screen.

12 Check the WatchFileJob status for the specified recorder on the [Job Status] tab of the [Importer Setting Details] dialog as described on page 42.

Step 8: Configuring Network Cameras

Configure the network cameras installed in the operating rooms and other areas, configure the camera server network settings, and configure the audio/video settings.For details about network cameras and camera servers compatible (connectivity verified) with this system, see “Supported Network Cameras and Camera Servers (connectivity verified)” (page 60).

• This section describes the configuration procedure for a Sony SNC-VB630 Network Camera as an example. For details about SNC-VB630 operation, refer to the user’s guide for the SNC-VB630.

• If using a network camera other than the SNC-VB630 or a camera server, refer to the operating instructions of each device used for the configuration.

1 Connect a network camera to the network, and configure the network settings.

For details, refer to the instructions for each device.

2 Connect to the network camera using a browser.

For details about connecting, refer to the user’s guide for the camera.The administrator settings menu of the network camera appears.

Item Setting

Encryption Select [Yes].

Key Enter the key.Specify a 32-character hexadecimal (0 to 9, a to f) string.The key specified here is used for encrypting the metadata files (page 41).

Tips


3 Log in to the administrator settings menu as a user with permissions to configure the network.

On the SNC-VB630, log in as an administrator.

4 Configure settings relating to the video codec.

On the SNC-VB630, click the [Setting] button in the top right corner of the software screen, then click [Video] and set the following items.• Image codec• I-picture interval• Image size• Bit rate• Frame rate• H.264 profile• Bit rate compression mode’s CBR on/off setting

5 Configure settings relating to the audio codec.

On the SNC-VB630, click the [Setting] button in the top right corner of the software screen, then click [System] and set the following items on the [Audio] tab.• Audio codec• Audio transmission on/off

6 Save the configuration.

Step 9: Configuring the Streaming Server

Perform protocol conversion on the audio/video signals transmitted from the network camera, and configure the streaming server settings sent to the CMS server.

This section describes the configuration of a streaming server using the Wowza Streaming Engine as an example.

1 Double-click the “startmgr.bat” file on the CMS server.

File storage location:C:\Program Files\Sony\Content Management System\cms\external\wms\manager\bin

The command prompt launches and the service is started.

2 Enter the following URL in a browser.

http://[streaming_server_address]:8088Ask an administrator for the streaming server address.

The Wowza Streaming Engine software is displayed in the browser.

3 Click the [Skip Info] button on the [Welcome] tab.

The [Sign In] screen appears.

4 Enter the following user name and password, then click the [Sign In] button.

User Name: adminPassword: adminThe [Welcome to Wowza Streaming Engine] screen appears.

5 Open Application >live >Stream Files, then click the [Add Stream File] button.

The [Add Stream File] dialog appears.

6 Set the following items in the [Add Stream File] dialog.

7 Click the [Add] button in the [Add Stream File] dialog.

The dialog closes, and the stream settings are added.

8 Click the [Return to Stream Files] button.

Tip

Item Setting

Enter a name for the new Stream file

Enter a stream name. The stream name specified here is used for [Stream Name] configured in [Live Source] on the [System Settings] > [Operating Rooms] screen on the [Admin Tool] screen (page 34).

The stream name is case sensitive.

Stream URI Enter the stream output destination URI of the network camera.If using the SNC-VB630:rtsp://[network_camera_address]/media/video1

Ask an administrator for the network camera address.

“media/video1” after the IP address is the required path value. The value will vary depending on the network camera used.

Note

Note


20

9 Click the [Connect to this stream] button for the added stream in the Stream Files list.

The [Connect a Stream File] dialog appears.

10 Click the [OK] button in the [Connect a Stream File] dialog.

The stream is connected.

11 Click the [Add to Startup streams] button for the added stream in the Stream Files list.

This setting will automatically connect the network camera stream in cases such as when the CMS server is restarted.

12 Open Application >live >Incoming Streams, then click the name of the added stream.

13 Click the [Test Players] button.

The [Test Players] dialog appears.

14 Select [Adobe RTMP] in the [Test Players] dialog, then click the [Start] button.

15 Check that the image is displayed in the viewer.

16 Enter Ctrl+C at the command prompt launched when “startmgr.bat” was executed.

The Wowza Streaming Engine service stops.

Step 10: Configuring [Operating Rooms] in [System Settings] on the [Admin Tool] screen

Configure [Operating Rooms] in [System Settings] on the [Admin Tool] screen for browsing live sources.

1 Configure live sources for viewing as described on page 34.

This completes the software installation and initial setup.

Installing CMS Metastamper and Initial Setup

Use the following procedure if planning to use the optional CMS Metastamper.

Step 1: Installing CMS Metastamper on a PC

Prerequisites• OS: Windows 8.1, Windows 8, Windows 7• PC specification: CPU, memory, and HDD capacity

required by the OS above• Screen resolution: 1024×768, 1280×1024

Installing

1 Click Setup.exe for CMS Metastamper.

The [Security Warning] dialog appears.

2 Click the [Run] button.

The installer starts.


The [License Agreement] screen appears.

Step Operation See page

1 Installing CMS Metastamper on a PC page 20

2 Initial setup of CMS Metastamper page 21

Installing CMS Metastamper and Initial Setup

4 Select [I Agree], and click the [Next] button.

The [Select Installation Folder] screen appears.

5 Specify the installation destination, and click the [Next] button.

• Enter the path of the folder in which to install, or click the [Browse] button and specify the installation folder.

• Select [Just me] to limit use to the user currently logged in to the PC system. Select [Everyone] to permit use by all users able to log in to the PC system.

The [Confirm Installation] screen appears.


If the [User Account Control] dialog appears, click the [Yes] button to start installation.

To abort the installation, click the [Cancel] button.When installation finishes, the [Installation Complete] screen appears.

7 Click the [Close] button to exit the installer.

8 Register CMS Metastamper in the Start menu.

Step 2: Initial Setup of CMS Metastamper

1 Perform initial setup of CMS Metastamper, as described on page 54.

This completes the CMS Metastamper installation and initial setup.

Tip

21Installing CMS Metastamper and Initial Setup

22

Uninstalling Software

Use the following procedures if you need to uninstall the software.

Uninstalling Content Management System (CMS core)

Uninstall using the [Programs and Features] control panel in Windows Server 2012 R2.

You can also use the Setup.exe installer used to install CMS software on the CMS server to uninstall the software.

Uninstalling Content Management System will remove all content within CMS and the database. Once removed, the data cannot be restored.

Uninstalling CMS Metastamper

Uninstall using the [Programs and Features] control panel.

Starting and Exiting the Software

Starting and Logging In

1 Launch a web browser.




3 Enter the administrator user ID and password.


The [Live] or [Archive] appears.

The logo shown on the login screen above is an example only.

An error message appears if the user ID and password are incorrect.

5 Click the (Administrator) button at the top right of the screen.

The [Admin Tool] screen appears in a separate browser window.

Tip

Note

Tip

Note

User ID

Password

Uninstalling Software / Starting and Exiting the Software

Logging out and Exiting

1 Click the [Logout] button at the top right of the screen.

The login screen appears after logging out of the system.

2 Click the browser [X] (Close) button.

Selecting the display languageYou can change the display language of the software display to English or Japanese.After logging in, the display is in English or Japanese, according to the display language setting of the web browser.Use the following procedure to change the display language.

1 Click the (Settings) button.

The [Settings] dialog appears.

2 Select a language from the [Language] combo box, and click the [OK] button.

The display language changes to the selected language.

23Starting and Exiting the Software

24

Admin Tool Screen

This screen is displayed for administrator users.Click the configuration item tabs on the left to display the corresponding settings screen.

aSettings tabsContains configuration items classified by type on different tabs. Click the tabs to display the settings screens.If an item contains sub items, click the item to display the sub items. The mark indicates the currently displayed sub item.

Configuration items

bDate and time displayDisplays the current date and time.

cUser nameDisplays the logged in user name.

d [Logout] buttonLogs the user out of the system.

e (Settings) buttonDisplays the [Settings] dialog for switching the display language (page 23).

f (Refresh) buttonUpdates the display to the latest status.

1 2 3 4 5

6

Item Description See page

System Analysis

Displays usage status of the CMS system file server.

page 25

Server Settings

Settings related to the server. page 26

System Settings

Settings related to the whole system.

page 29

Users and Groups

Configures user accounts and user role settings.

page 44

Job Displays the job list and other details.

page 49

Log Exports logs. page 52

Admin Tool Screen

System Analysis

System Analysis Tab

Displays usage status of the CMS system file server.

a (Refresh) buttonUpdates the display.

Screen description• The circular graph on the left displays the storage used

on the file server connected to CMS as a circular arc, percentage, and in GB units of the total storage.

• The circular graph on the right displays the activity ratio of each file server connected to CMS as a circular arc and percentage.If there are multiple files servers connected, the activity ratio of the total capacity is displayed as a circular arc and percentage for each server.

1

25System Analysis

26

Server Settings

LDAP Server Tab

Configures LDAP server settings.

a [Save] buttonSaves the configuration settings.

b [Revert] buttonRestores configuration settings to their previous values.

c (Refresh) buttonUpdates the display to the latest status.

Configuring the LDAP server


• The icon appears for modified items.• To return the settings to the previous values, click

the [Revert] button.



1 2 3

Item Setting

Name Enter the name of the LDAP server.

Server Address Enter the address of the LDAP server.

Server Port Enter the port number of the LDAP server.

LDAP Type Select the type of the LDAP server from the combo box. [Active Directory] and [OpenLDAP] options are supported.

bind DN Enter the bind DN.

bind password Enter the bind password.

Search base DN Enter the search base DN.

User Principal Enter the user principal name.

Server Settings

Master Server Tab

Configures the master server.




Configuring the master server


1 2 3

Item Setting

Server Address Enter the address of the master server.

• Enter the address of the server with the CMS core installed.

• Set the server address after checking the jobs (page 49) and canceling the CleanJobTask (page 29). After setting the server address, run the CleanJobTask (page 29).

Notes

Interconnect Address

Enter the interconnect address of the master server.

If you are running a job on the master server, the attempting to change the interconnect address will cause an error. First, cancel all running jobs and then change the address.

Server Port Enter the port number.

Set port 80 for HTTP (initial setting). Set port 443 for HTTPS.

Streaming Server Port

Enter the port number of the streaming server.The default value is 1935.

Status Displays a green indicator and “Active” when the master server is running, or a gray indicator and “Inactive” when not running.If the status is [Inactive] and an error occurs, a warning message is displayed below the status indicator.

Item Setting

Note

Note

27Server Settings

28



Note the following points when configuring a root directory.– If content is created and saved in the root directory

after the start of operation, attempting to delete the root directory will cause an error. The root directory can be deleted only when it contains not content.

– If a job is active on the master server, attempting to add, modify, or delete a directory will cause an error. To continue, first check the status of running jobs and cancel the jobs (page 49).

– The folder specified in Root Directory can be shared with other users as described in “Step 4: Creating a Shared Folder on the CMS Server (Windows Server 2012 R2) and Specifying an NTP Server” (page 14). Specify the same share name and path for sharing in [Name] and [Path] for the root directory. Sharing will not work if the entries are different.



Import Server/Recording Server

Refer to the Content Management System user’s guide.

Root Directory (Original)

Set the directory path for storing the source video in [Name] and [Path].The directory path configured here is used as the default value when configuring the root directory of an import server and recording server.The used storage space at the destination is displayed in a bar graph.Adding a directoryClick the [Add] button to add a directory.Deleting a directorySelect the directory to delete, and click the [Delete] button.

Root Directory (Thumb, Proxy, Chapter)

Set the directory path for storing thumbnails, proxy video, and chapters in [Name] and [Path].The used storage space at the destination is displayed in a bar graph.Adding a directoryClick the [Add] button to add a directory.Deleting a directorySelect the directory to delete, and click the [Delete] button.

Item Setting Note

Server Settings

System Settings

General Settings Tab

Configures general system settings.




Configuring the system


1 2 3

Item Setting

Delete contents automatically

Enables/disables (On/Off) auto deletion of contents.When enabled, contents are automatically deleted from the server when the case retention period has expired.

Case Retention Period

Sets the case storage retention period.

Automatically Delete Contents Job Status

Displayed when [Delete contents automatically] is enabled (On) and the time specified in [Case Retention Period] has elapsed.Displays a green indicator when active, or a gray indicator when inactive.

Enable to delete original contents

Enables/disables (On/Off) the deletion of original contents.Disabling the deletion of original contents (Off) disables the deletion of original contents belonging to Editor users.

Create Proxy Enables/disables (On/Off) proxy file creation.Enabling (On) creates a proxy file when importing, uploading, or editing video.

CleanJobTaskJob Status

Displays a green indicator when the CleanJobTaskJob status is active, or a gray indicator and [Activate] button when inactive. To run a job, click the [Activate] button.CleanJobTaskJob is a function that deletes finished jobs from the job list in sequence from oldest to newest.CleanJobTaskJob should be run regularly to prevent adverse affects on system response as jobs accumulate.

Some master server settings cannot be changed while CleanJobTaskJob is active. In this case, cancel all running jobs on the [Job] tab (page 49) and then change the master server settings.

Login Timeout

Sets the duration for automatically logging out from the system after a specified duration of user inactivity.After enabling this setting, restart the service to apply the setting.

Item Setting

Note

29System Settings

30





Hospital Name

Enter the name to be displayed on the login screen and the [Live] screen.

Hospital Logo Enter the save destination path and file name of the logo file to be displayed on the login screen.Example: If the logo file is saved in C:\Program Files\Sony\Content Management System\web\mvs\image\xxxxx.png, enter “image/xxxxx.png.”

xxxxx.png is the file name.

The supported still image file formats for the hospital logo are png, jpg, and bmp.

Version Displays the version number of CMS software.

Item Setting

Tip

System Settings

Metadata Tab

Used to add, change, delete, and sort the metadata items displayed on the CMS operation screens.

a (Edit) buttonInvokes edit mode in the Metadata Definition area.

b (Refresh) buttonUpdates the display to the latest status.

cMetadata Mapping areaDefines the metadata mapping for cases, videos, still images, and files.

dMetadata Definition areaDefines the metadata mapping.

Adding and mapping metadata



The [Metadata Definition Details] dialog appears.

3 Configure the following settings.


The metadata is saved and displayed in the Metadata Definition area list.


6 Click the metadata in the Metadata Definition area list.

12

3 4

The settings made in the [Metadata Definition Details] dialog are displayed.* These cannot be modified here.

A lock mark is displayed for preset metadata.

Item Setting

Key Enter the metadata key.This is a required item.

Name Enter the name of the metadata key to display on the CMS operation screen.This is a required item.

Type Select the type of the metadata from the combo box.• Text: Text type• Date: Date type

Use for Select [Display] to display the metadata on the CMS operation screen. Select [Hide] to not display the metadata on the CMS operation screen.

When [Hide] is selected, the [Sortable] and [Searchable] options cannot be selected.

Sortable When set to [On], the metadata in the operation screens can be sorted. When set to [Off], sorting of metadata is disabled.

Searchable When set to [On], the metadata in the operation screens can be searched. When set to [Off], searching of metadata is disabled.

Note

31System Settings

32


The metadata is mapped.

Adding and deleting metadata mappings is an asynchronous process. When deleting, a [Loading] icon is displayed on the right side of the metadata mapping name. If an error occurs or the process is canceled, a red triangular error icon is displayed.A metadata mapping cannot be deleted when [Loading] is displayed. Attempting to add metadata, map metadata, or delete while adding/deleting will cause an error. Only a single job for deletion or addition can be active at any one time.

You can check the add metadata, mapping, and deletion processing for running jobs and finished jobs on the [Job] tab. You can also stop, restart, cancel, and delete processes as required (page 49).

Deleting metadata mapping


2 Click the row for the metadata mapping to delete in the Metadata Mapping area list.

3 Click the [Delete] button.

A confirmation dialog appears.

Metadata mapping with a lock mark cannot be deleted.

4 Click the [OK] button in the dialog.

The metadata mapping is deleted.

The metadata definition is not deleted when the metadata mapping is deleted.

Changing registered metadata

1 Turn edit mode off.

When edit mode is on, the metadata to change cannot be selected.

2 Click the row for the metadata to change in the Metadata Definition area list.

The [Metadata Definition Details] dialog appears.

3 Configure the settings as described in step 3 on page 31.

[Key] and [Type] cannot be modified.


The metadata settings are changed.

Deleting registered metadata


2 Click the row for the metadata to delete in the Metadata Definition area list.



Metadata with a lock mark cannot be deleted.


The metadata is deleted.

Note

Tip

Note

Tip

Note

Note

Note

System Settings

Changing the display order of metadata mapping


2 Drag & drop the metadata row you want to move to the desired location.

The display order of the metadata mapping changes.


Screens that reflect metadata mapping settings

Live screen• List view of the operating room list screen (PC/iPad)• Single-play/Dual-play screen (PC/iPad)• Quad-play screen (iPad only)

Archive screen• Case list search results area (PC only)• Case list popover (iPad only)• Case properties screen (case information) (PC/iPad)• File properties screen (case information/file

information) (PC/iPad)

33System Settings

34

Operating Rooms Tab

Used to add, configure, and delete operating rooms displayed on the operating room list screen.

a (Edit) buttonInvokes edit mode.

b (Refresh) buttonUpdates the display to the latest status.

cOperating room list areaDisplays the operating rooms and their live sources displayed on the operating room list screen.“REC?” is displayed on the thumbnail of live sources when recording. A “Muting” icon is displayed instead of the thumbnail for live sources that are muted.

Adding an operating room



The [Add Operating Room] dialog appears.


4 Click the [Add] button, and configure the following settings.

1 2

3

Item Setting

Name Enter the name of the operating room.This is a required item.

Live Source Displays the live sources associated with the operating room in list view. The following items can be edited.[Name]:Enter the name of the live source displayed on the operating room list screen.[Server]:Select [Master server] or [Recording server] from the combo box.

An import server does not have a live recording function, and is not displayed.[Stream Name]:Enter the name of the stream file specified in [Enter a name for the new Stream file] in step 6 on page 19.Enter the following if using Wowza:live/xxxx, where xxxx is the stream file name.

A validation error will occur if the stream name of a live source does not contain a slash (/) character.Adding a live sourceClick the [Add] button to add a live source.Deleting a live sourceSelect the live source to delete and click the [Remove] button. Click [OK] in the confirmation dialog to delete the selected live source.

Note

Note

System Settings



6 Click the [Viewer] tab.


The [Search User/Group] dialog appears.

8 Search the CMS users/groups and select a viewer from the list, then click the [OK] button.

The viewer is registered.




Changing existing operating room settings


When edit mode is on, the operating room to change cannot be selected.

2 Click the row for the operating room to change in the operating room list area.

The [Operating Room Details] dialog appears.

3 Configure settings as described on page 34.


The metadata settings are changed.

Item Setting

View Role Select the view role (operating room viewing privileges) for the user or group from the combo box.[Live Control]:Grant viewing, start/stop recording, and muting start/stop control privileges.[View Only]:Grant viewing privilege only.Adding a user/groupClick the [Add] button to display the [Search User/Group] dialog.Search for a user/group and/or select a user/group from the list, then click the [OK] button to add the user/group to the viewer list.Deleting a user/groupSelect the user/group to delete in the viewer list and click the [Remove] button. The selected user/group is deleted.

Note

35System Settings

36

Deleting a registered operating room


2 Click the row for the operating room to delete in the operating room list area.



4 Click the [Delete] button in the dialog.

The operating room is deleted.

System Settings

Transcoder Tab

Configures the image quality when the user extracts/merges video on the CMS operating screen.




Configuring the image quality

1 Configure the following items for each format.

Edited Video

Tip

Configures the selected item.

1 2 3

Item Setting

High Quality Set the image quality when transcoding extracting/merging video files at high resolutions.Settings: 1920×1080 27Mbps, 1920×1080 20Mbps, 1920×1080 18Mbps, 1920×1080 12Mbps

Middle Quality

Set the image quality when transcoding extracting/merging video files at medium resolutions.Settings: 1280×720 16Mbps, 1280×720 8Mbps, 1280×720 4Mbps

Low Quality Set the image quality when transcoding extracting/merging video files at low resolutions.Settings: 854×480 4Mbps, 854×480 2Mbps, 720×576 4Mbps, 720×576 2Mbps, 720×480 4Mbps, 720×480 2Mbps, 640×360 2Mbps, 640×360 1Mbps, 480×360 2Mbps, 480×360 1Mbps

37System Settings

38

Proxy





Item Setting

Width× HeightBitrate

Sets the proxy file image size and bit rate when [Create proxy] is set to [On] in System Settings.Settings: 854×480 4Mbps, 854×480 2Mbps, 640×360 2Mbps, 640×360 1Mbps, 480×360 2Mbps

A proxy file is not created if the resolution of the source file is lower than the setting specified here.

Note

System Settings

Importer Tab

The recorded material from a HVO recorder is saved to a shared folder on the CMS server (Windows Server 2012 R2). Image data can be viewed, searched, and edited by importing a copy of recorded material saved in the shared folder on the CMS server.Use this screen to register and configure recorders for shared folders.

a (Edit) buttonInvokes edit mode.

b [Add] buttonAdds a recorder (page 39).

c [Copy Add] buttonCopies the settings of a registered recorder and adds a new recorder based on those settings (page 42).

d [Delete] buttonDeletes a recorder setting (page 42).

e (Refresh) buttonUpdates the display to the latest status.

Adding a recorder





4 Configure the recorder.

1 2 3 4

5

WatchFile job statusGreen: RunningGray: StoppedYellow: Pending, canceled

Recorder statusGreen: RunningGray: Stopped

Item Setting

Name Enter the name of the recorder.

Operating Room

Displays the operating rooms specified on the [Operating Rooms] tab (page 34) in the combo box.Select the operating room configured for the recorder.The selected operating room is handled as case metadata.

Server Displays the master server, and all import servers and recording servers in the combo box.Select the server to start an importer job and WatchFile job.

Type Select the type of importer.For recorders other than HVO-series recorders, select [General].

Input Source Enter the name of the input source.The input source name is handled as metadata of the imported file.

39System Settings

40



6 Click the [Metadata] tab of the [Add Importer Setting] dialog.

The settings displayed on the [Metadata] tab vary depending on the type of importer selected in step 4.

When the importer is set to [HVO]

When the importer is set to [General]

7 Configure the metadata.

Settings when the importer is set to [HVO]

Watch Folder Enter the path of the shared folder configured in Step 4 (page 14).

Log Folder Enter a destination to save logs relating to file transfers between the recorder and the watch folder.

Create the output folder on the CMS server before configuring this setting.

Default Account

Select the CMS user name to configure for the default account from the combo box.If the value of the reference path within a metadata information file and the CMS account are not mapped, the selected user is used as the [Owner] in the case metadata.

Item Setting

Note

Item Setting

Patient ID Num of Digits

Specify the same number of digits configured in [Digits in Patient ID] on the HVO recorder.

Use the following procedure to check the setting on the HVO recorder.1.Press the [MENU] button on the

front panel of the HVO recorder.The menu appears on the display.

2.Click [Settings] on the menu screen.The [Settings] screen appears.

3.Select the [System Admin Settings] button on the screen.The [System Admin Settings] screen appears.

4.Select the [Function Settings] button on the screen.The [Function Settings] screen appears.

5.Check the setting of [Digits in Patient ID] on the [General 1] tab of the [Function Settings] screen.

System Settings

Settings when the importer is set to [General]



Directory Date Format

Select the date format of the folder name used when folders are created from the combo box.The directory data format options are [yyyyMMdd], [MMddyyyy], and [ddMMyyyy].Specify the same setting configured in [Date Format] on the HVO recorder.

Use the following procedure to check the setting on the HVO recorder.1.Press the [MENU] button on the

front panel of the HVO recorder.The menu appears on the display.

2.Click [Settings] on the menu screen.The [Settings] screen appears.

3.Select the [System Admin Settings] button on the screen.The [System Admin Settings] screen appears.

4.Select the [Language] button on the screen.The [Language] screen appears.

5.Check the setting of [Date Format] on the [Language] screen.

Metadata Mapping Type

Select the source of the metadata information to import with the content.Meta Stamper: Import Metastamper metadata information into CMS.HVO: Import HVO metadata information into CMS.None: Do not import metadata information.

Select [None] when registering the following recorders.• HVO-series recorders configured

not to export metadata files• HVO-series recorders that do not

support the metadata file export function

Store Metadata File

Select [On] to import metadata files, or select [Off] to disable importing.

Item Setting

Note

Metadata Mapping

Mapping list between the metadata items in the metadata file and the CMS metadata keys.[Path]Specify the path of the metadata in Metastamper or in the HVO-series metadata file for the CMS metadata item you want to map.For path values and descriptions, see the mapping settings on page 57.[CMS Metadata]Select the metadata item to display in CMS.Adding a metadata keyClick the [Add] button and specify values for [Path] and [CMS Metadata].

Path of Account

Specify the reference path within the metadata information file.The value of the reference destination is used as the [Owner] in the case metadata.Example: /RecInfo/doctor/

Account Type Set whether to map the value of the reference destination specified in [Path of Account] or to map the registered user name as an alias.User ID: Use an LDAP user ID.User name (alias): Use the metadata of the user name registered as an alias.

Metadata File Encryption

Select [On] to encrypt metadata files, or select [Off] to disable encryption.Set the following if encryption is enabled.• AES Common Key

Use the encryption key configured in Step 5 (page 17).

• AES Mode• AES IV• AES Padding

Item Setting

Case Folder(Regular Expression)

Refer to the Content Management System user’s guide for how to configure settings.

Patient ID(Regular Expression)

Item Setting

41System Settings

42

9 Check that the specified recorder is displayed on the [Importer] screen.

10 Check the WatchFileJob status of the specified recorder.

Monitoring the recorder job status


When edit mode is on, the recorder to change cannot be selected.

2 Click the recorder to monitor on the recorder list screen.

The [Importer Setting Details] screen appears.

3 Click the [Job Status] tab.

Detailed information about the jobs linked to the recorder is displayed.

Adding a new recorder by copying a registered recorderYou can copy the settings of a registered recorder and add a recorder based on those settings.


2 Select the source recorder on the recorder list screen.

3 Click the [Copy Add] button.



Changing the settings of a registered recorder

1 Select the recorder to change on the recorder list screen.

The [Importer Setting Details] dialog appears.


• The [Type] and [Server] settings cannot be modified for registered recorder.

• The [Name], [Watch Folder], and [Log Folder] settings cannot be modified while WatchFileJob is active. First cancel the WatchFileJob and then change the settings.

Deleting a registered recorder


2 Select the recorder to delete on the recorder list screen.


A recorder with active jobs cannot be deleted. First cancel the jobs and then delete.

Note

Item Setting

WatchFileJob status

Displays a green indicator and “Active” when WatchFileJob is running.Displays a gray indicator and “Inactive” when WatchFileJob is stopped.Displays a green indicator when WatchFileJob is pending.

(Cancel) button

Cancels the watch job for the watch folder.

[Restart] button Restarts a canceled watch job for the watch folder.

[Activate] button Displayed when the WatchFileJob status is Inactive.Click to start the WatchFileJob.

Active Importer Jobs

Displays the active importer jobs.Last Begin Date: Displays the date and time when job was last run.Created Date: Displays the date and time jobs were registered.Status: Displays [progress] for running jobs and [queued] for pending jobs. The job progress status is displayed in a progress bar as a percentage.

Notes

Note

Item Setting

System Settings

Exporter Tab

Configures export settings for registering still images in PACS.




Configuring export settings for PACS registrationInitial settings are configured immediately after installation. Change the settings as required.


To return the settings to the previous values, click the [Revert] button.



1

2

3

Item Setting

SCU (Client AE Title)

Enter the service class user (client AE title).

Client Port Enter the client port.

SCP (PACS AE Title)

Enter the service class provider (PACS AE title).

PACS IP Address

Enter the IP address of PACS.

PACS Port Enter the PACS port.

[Echo] button Click the button to start the communications status check of PACS registration using the configured settings. A progress indicator is displayed beside the button during the check process.If registration is enabled, the indicator disappears.If registration is not enabled, an error message appears.

43System Settings

44

User/Group and Role Settings

Users/Groups Tab

Use this screen to configure users and groups in the system.Users and groups can be assigned one of the following account roles (Integrator, Manager, Editor, or Viewer).The functions that are made available vary according to the account role. For details, see “About Account Roles” (page 61) in the Appendix.

Users to register must be LDAP users and groups, since user authentication is performed using Active Directory or OpenLDAP.

a (Edit) buttonInvokes edit mode, displaying the [Add] button and [Delete] button.

b [Add] buttonAdds a user or group (page 44).

c [Delete] buttonDeletes a user or group (page 47).

d (Up) and (Down) buttonsChanges the priority of the selected user or group (page 47).

e (Refresh) buttonUpdates the display to the latest status.

Registering a top-level LDAP user/groupUse the following procedure with no user or group selected in the list.

1 Click the (Edit) button.


The [Add User/Group] dialog appears.

Tip

1 2 3

5

4

Users and groups that have expired are shown in red.



4 Enter the LDAP keyword to use in the search box.

The search results appear in list view.

5 Select the LDAP user/group to register from the search results list.


The screen returns to the [Users/Groups] screen.

7 Check that the user/group has been registered.

Registering an LDAP user in a top-level LDAP group

Only an LDAP user can be registered.


2 Click the row for the destination LDAP group in the list on the [User/Group] screen.


The [Add User/Group] dialog appears.

LDAP users are displayed immediately below the selected LDAP group in the list.

4 Select the LDAP user to register from the list.

Attempting to register a registered LDAP group/user will cause an error.

5 Set [Name] and [Role] in the dialog.

6 Enter an alias in the [Alias Name] text box if you want to specify an alias for the LDAP user to add.


The [Add User/Group] dialog closes.

8 Check that the user/group has been registered.

Item Setting

Name Enter the name of the user/group.This is a required item.

Parent Group

Displays the parent group.“(none)” is displayed when creating a top-level user/group.

Expire Date

Enter the expiration data of the user/group.

This item cannot be configured for a top-level user/group.

Login Banned

Disable/enable (On/Off) login to other top-level user/groups.The default setting is Off.

This item cannot be configured for a top-level user/group.

Role Select the role of the user/group from the combo box.For details about roles, see page 48.

Type Displays the type of the user/group.It cannot be modified.

Note

Note

Tip

Note

45User/Group and Role Settings

46

Changing user or group settingsYou can change the settings for a registered user or group.


When edit mode is on, the user/group to change cannot be selected.

2 Click the row for the user/group to change in the list on the [Users/Groups] screen.

The [User/Group Details] dialog appears.

3 Change the settings.




The changes are saved and the screen returns to the [User/Group Details] dialog closes.

Sharing user or group contents (automatic sharing function)You can share content owned by a user or group with other users and groups.The user/group names for sharing and their roles are displayed in [Share Automatically] in the [User/Group Details] dialog.

To add a user or group for sharing

1 Click the [Add] button in the [User/Group Details] dialog.

The [Search User/Group] dialog for searching for a user/group to share with automatically appears.

Note

Item Setting

Name Enter the name of the user/group.This is a required item.

Parent Group

Displays the top-level user/group.It cannot be modified.

Expire Date Enter the expiration data of the top-level user/group.

Only a top-level user/group can be changed.

Login Banned

Disable/enable (On/Off) login to other top-level user/groups.The default setting is Off.

Only a top-level user/group can be changed.

Role Select the role of the user/group from the combo box.For details about roles, see page 48.

Type Displays the type of the user/group.It cannot be modified.

User ID Displays the user ID.It cannot be modified.

LDAP User Name

Displays the LDAP user name.It cannot be modified.

Note

Note

Alias Name Sets an alias for the LDAP user.An alias can be used for the [Account Type] set in step 7 on page 41.

This can be configured only when modifying an LDAP user.

User Type Displays the type of the user.It cannot be modified.

Share Automatically

Displays the user/group name and sharing role of user/groups to share with automatically.For details about automatic sharing, see page 46.

[Add] button Adds a user/group to share with automatically (page 46).

[Remove] button

Removes a user/group to share with automatically (page 47).

Item Setting

Note


2 Enter the keyword for the user/group to share contents with in the search box.

The search results appear in list view.

3 Click the user or group to share with automatically.


Sharing automatically is configured, and the screen returns to the [User/Group Details] dialog.

5 Set the sharing role for the specified user or group to share with automatically from the combo box.

The selectable sharing roles are [Read/Write] and [Readonly].For details about the operations available for the specified sharing role, refer to “Sharing Roles” in the User’s Guide.


Enabling sharing also shares content imported previously by the user configured for sharing.

To remove a user or group to share with automatically

1 Click the user/group to remove from [Share Automatically] in the [Users/Groups Details] dialog.

2 Click the [Remove] button.

The selected user/group is removed from the list, and sharing is canceled.


Removing sharing privileges also disables sharing of content previously imported by the user configured for sharing.

Changing the usage priority of an LDAP user belonging to several groupsIf an LDAP user is registered in more than one top-level user/group, and the [Expire Date] and [Login Banned] settings for user/groups to which the LDAP user belongs are different, the priority of the user/group settings information that is used can be changed by changing the display order in the list on the [Users/Groups] screen.A higher position in the list increases the priority, while a lower position decreases the priority.

1 Select a top-level user/group for which you want to change the priority.

2 Click the (Up) or (Down) button on the [Users/Groups] screen.

The priority is changed.The display order of the list sets the priority of the configuration used.

• A user who belongs to more than one group and has an account registration has operating permissions using that account.

• A user who belongs to more than one group and does not have an account registration will be granted operating permission for an account determined by the account priority of the groups to which they belong the first time they log in.

Deleting a user or group


2 Click the row for the user/group to delete in the list on the [Users/Groups] screen.


A deletion confirmation message appears.


The user/group is deleted.

• Deleting a group also deletes the user/groups belonging to the group.

• If there is more than one piece of content owned by a user, attempting to delete the account will cause an error.

Note

Note

Tips

Notes

47User/Group and Role Settings

48

Roles Tab

You can change the role setting applied to a user or group.

a (Refresh) buttonUpdates the display to the latest status.

1


Monitoring Jobs

Job Tab

You can monitor information for currently running jobs and completed jobs. You can also stop, restart, cancel, and delete jobs as required.

a (Edit) buttonInvokes edit mode, displaying the [Delete] button.

b [Delete] buttonDeletes the selected job (page 50).

c [Filter] combo boxFilters the jobs to display by the selected criteria.[All]: Displays all jobs.[Active Jobs]: Displays the currently running jobs.[History Jobs]: Displays completed jobs.

d [Type] combo boxFilters the jobs to display by the job type.

e [Type] combo boxFilters the jobs to display by the job type.

f (Refresh) buttonUpdates the display to the latest status.

The display is updated every three seconds, even without clicking the button.

gJob itemsDisplays job item names. Click an item name to sort the job list in ascending/descending order for the selected item.

hLink to contents playback screenClicking links colored blue will display the contents playback screen in a separate window.

iJob statusDisplays the job status (page 50).

jPage switchingSwitches the displayed page when the jobs fill more than one page.

kDisplayed jobs and total jobsThe numbers of the jobs displayed on the current page is displayed beside [Job].The total number of jobs in the list is displayed beside [Total Job].

43

9

8

0 qa

51

7

26

Tip

49Monitoring Jobs

50

Checking the job statusThe job status is displayed in a progress bar in the [Status] column.

You can stop, restart, cancel, and delete the processing for running jobs and delete jobs that have finished running.

(Pause) button:Pauses job processing.

(Resume) button:Resumes processing of a paused job.

(Cancel) button:Cancels job processing.

(Delete) button:Deletes the job. When clicked, a deletion confirmation message appears. Click the [OK] button of the message dialog to delete the job.

Monitoring job details


Job details cannot be monitored if edit mode is on.

2 Click the row for the job that your want to display details on the job list screen.

Clicking a link when [Target Case/ID] is displayed blue will display the corresponding contents playback screen. Do not click the link when you want to display the [Job Details] dialog.

The [Job Details] dialog appears.

[Pause] button:Pauses job processing.

[Resume] button:Resumes processing of a paused job.[Cancel] button:Cancels job processing[Delete] button:Deletes the job. When clicked, a deletion confirmation message appears. Click the [OK] button of the message dialog to delete the job.

Showing/hiding itemsClick the (Show) or (Hide) button to show/hide an item.

3 When finished, click the [X] (Close) button.

The dialog closes, and the screen returns to the job list screen.

Deleting a jobThere are three methods for deleting a job.

Deleting using the [Delete] button in edit modeYou can delete several selected jobs at the same time.


2 Click the job row to delete.



4 Click the [OK] button in the message dialog.

The job is deleted.

Job status Display

Running jobs • “Progress” and a green indicator are displayed in the progress bar.

• Progress status is displayed by the length of the bar.

Pending jobs “Pending” and a yellow indicator are displayed in the progress bar.

Queued jobs “Queued” and a green indicator are displayed in the progress bar.

Completed jobs

“Completed” and a gray indicator are displayed in the progress bar.

Paused jobs “Paused” and a green indicator are displayed in the progress bar.

Failed jobs The progress bar turns light red, and “Error” and a gray indicator are displayed in the progress bar.

Canceled jobs The progress bar turns light gray, and “Canceled” and a gray indicator are displayed in the progress bar.

Notes

Tip

Monitoring Jobs

Deleting using the (Delete) button in the [Status] column for each job

1 Click the (Delete) button.


2 Click the [OK] button in the message dialog.

The job is deleted.

Deleting using the [Delete] button in the [Job Details] dialog (page 50)

51Monitoring Jobs

52

Checking Logs

Operation Log Tab

Exports the user operation history as a log.


Exporting an operation log

1 Select the date of the log you want to export from the [Log Files] combo box.

2 Click the [Download] button.

The log file is saved according to the browser settings and display format.

1

Checking Logs

System Log Tab

Exports CMS server logs.


Exporting a system log

1 Select the log you want to export from the [Log Files] combo box.

You can select a server to download logs from each server.The master server, import servers, and recording servers are displayed.

2 Click the [Download] button.

The log file is saved according to the browser settings and display format.

1

53Checking Logs

54

CMS Metastamper Settings

This section describes CMS Metastamper configuration performed by administrator users.

.ini File Settings

You can change the patient information items displayed on the main screen and the patient information file contents exported to CMS by editing the setting.ini file.

1 Open the setting.ini file in the following folder using a text editor, such as NotePad.C:\ProgramFiles(x86)\Sony\CMS_MetaStamper

In Windows 8 and 8.1, the setting.ini file is located in the following folder.C:\Users\user_name\AppData\Local\VirtualStore\Program Files (x86)\Sony\CMS_MetaStamper

The initialization settings are displayed.

2 Change the .ini file values as required.

Tip

Value Operation

0 Not displayed in patient information on the main screen, but is included in the patient information file exported to CMS.

1 to 8 Displayed in patient information on the main screen in the specified sequence, and is included in the patient information file exported to CMS.

Editable surgeon name on the main screen


Config Settings

1 Start the touch panel PC.

CMS Metastamper starts, and the main screen appears.

2 Click/tap the (Settings) button.

The [Configure] screen appears.


DICOM settings

MWM SCP settings

MWM SCP settings

MPPS SCU settings

MPPS SCP settings

Recorder settings

COM Port settings

File Server settings

Item Setting

AE Title Enter the AE title that Metastamper transmits with the MWM SCU.

Item Setting

IP Address Enter the IP address of the MWM SCP.

Port Number Enter the port number of the MWM SCP.

AE Title Enter the AE title of the MWM SCP.

[ECHO] button Click to apply settings. “Success” is displayed if settings are successfully applied.

Item Setting

AE Title Enter the AE title that Metastamper transmits with the MPPS.

Item Setting

IP Address Enter the IP address of the MPPS SCP.

Port Number Enter the port number of the MPPS SCP.

AE Title Enter the AE title of the MPPS SCP.

[ECHO] button Click to apply settings. “Success” is displayed if settings are successfully applied.

Item Setting

Recorder No Select the recorder number to use from the combo box.

Enable Place a check mark in the checkbox to enable the recorder, as required, when several recorders are connected. Recorder 1 is enabled when one recorder is connected by default at installation.

Item Setting

COM Port Number

Enter the COM port number of the recorder.

Bit Rate Enter the bit rate of the recorder.

Item Setting

File Server UNC

Displays the save destination path of the file server settings. The display changes to match the setting of [Recorder No] in the [Recorder] settings.

User Enter the user name of the file server.

Password Enter the password of the file server.

55CMS Metastamper Settings

56

[AES Password] buttonClicking this displays the [AES Setting] dialog. Configure the Metastamper metadata encrypted password (key) in the dialog.

[Reader Setting] buttonConfiguration is required if patient information other than the patient ID, such as the patient name, is stored in a barcode or in a magnetic swipe (page 56).



Reader Settings

1 Click the [Reader Setting] button on the [Configure] screen.

The reader settings screen appears.

2 Import card reader data using a barcode reader while the screen is displayed.

The data appears.

A space character is represented by an asterisk (*).

3 Set the method for importing patient IDs.

4 Click the [Analyze] button.

Patient IDs are displayed using the specified display method as shown in [Result].


The configuration is saved, and the reader settings screen closes.

Item Setting

Password Setting

Specify a character string password (key) or a hexadecimal key.

Disp Password Place a check mark in the checkbox to show the entered password in the dialog.

Tip

Item Setting

Lead Position Select the import start position in the patient ID from the combo box.

Length Select the length (number of digits) of the patient ID from the combo box.


Appendix

Metadata Paths in Metastamper and HVO Metadata Files

Metadata mapping paths in HVO-series metadata files

xml

ini

Metadata mapping paths in Metastamper metadata files

No. Path Description

1 /RecInfo/recordingdate/ Recording start date and time

2 /RecInfo/doctor/ Name of doctor

3 /RecInfo/institute/ Name of institution

4 /RecInfo/procedure/ Procedure

5 /RecInfo/PatientInfo/id/ Patient ID

6 /RecInfo/PatientInfo/name/ Name of patient

7 /RecInfo/PatientInfo/gender/ Gender of patient

8 /RecInfo/PatientInfo/dateofbirth/ Date of birth of patient


1 /RecInfo/recordingdate/ Recording start date and time

2 /RecInfo/doctor/ Name of doctor

3 /RecInfo/institute/ Name of institution

4 /RecInfo/procedure/ Procedure

5 /PatientInfo/id/ Patient ID

6 /PatientInfo/name/ Name of patient

7 /PatientInfo/gender/ Gender of patient

8 /PatientInfo/dateofbirth/ Date of birth of patient


1 /RecInfo/RecordingDate/ Recording start date and time

2 /RecInfo/AccessionNumber/ Accession number

3 /RecInfo/Modality/ Modality

4 /RecInfo/StudyInstanceUID/ Study instance UID

5 /RecInfo/PatientInfo/PatientName/Name/ Name of patient (full name)

6 /RecInfo/PatientInfo/PatientName/Alphabet/ Name of patient (alphabetic characters)

7 /RecInfo/PatientInfo/PatientName/Ideogram/ Name of patient (ideographic characters)

8 /RecInfo/PatientInfo/PatientName/Phonogram/ Name of patient (phonetic characters)

9 /RecInfo/PatientInfo/PatientID/ Patient ID

10 /RecInfo/PatientInfo/PatientBirthDate/ Date of birth of patient

11 /RecInfo/PatientInfo/PatientSex/ Gender of patient

57Appendix

58

12 /RecInfo/PatientInfo/PatientWeight/ Weight of patient

13 /RecInfo/PatientInfo/PatientSize/ Height of patient

14 /RecInfo/PatientInfo/PatientState/ Status of patient

15 /RecInfo/PatientInfo/PregnancyStatus/ Status of pregnancy

16 /RecInfo/PatientInfo/MedicalAlerts/ Medical alerts

17 /RecInfo/PatientInfo/Allergies/ Contrast agent allergies

18 /RecInfo/PatientInfo/SpecialNeeds/ Special requirements

19 /RecInfo/ScheduledProcedureStepSequence/ScheduledStationAETitle/ Scheduled station AE title

20 /RecInfo/ScheduledProcedureStepSequence/ScheduledProcedureStepStartDate/ Scheduled procedure step start date

21 /RecInfo/ScheduledProcedureStepSequence/ScheduledProcedureStepStartTime/ Scheduled procedure step start time

22 /RecInfo/ScheduledProcedureStepSequence/ScheduledProcedureStepID/ Scheduled procedure step ID

23 /RecInfo/ScheduledProcedureStepSequence/ScheduledPerformingPhysicianName/Name/

Name of scheduled performing physician (full name)

24 /RecInfo/ScheduledProcedureStepSequence/ScheduledPerformingPhysicianName/Alphabet/

Name of scheduled performing physician (alphabetic characters)

25 /RecInfo/ScheduledProcedureStepSequence/ScheduledPerformingPhysicianName/Ideogram/

Name of scheduled performing physician (ideographic characters)

26 /RecInfo/ScheduledProcedureStepSequence/ScheduledPerformingPhysicianName/Phonogram/

Name of scheduled performing physician (phonetic characters)

27 /RecInfo/ScheduledProcedureStepSequence/ScheduledProcedureStepDescription/ Scheduled procedure step description

28 /RecInfo/ScheduledProcedureStepSequence/ScheduledStationName/ Scheduled station name

29 /RecInfo/ScheduledProcedureStepSequence/ScheduledProcedureStepLocation/ Scheduled procedure step location

30 /RecInfo/ScheduledProcedureStepSequence/ReferringPhysicianName/Name/ Name of referring physician (full name)

31 /RecInfo/ScheduledProcedureStepSequence/ReferringPhysicianName/Alphabet/ Name of referring physician (alphabetic characters)

32 /RecInfo/ScheduledProcedureStepSequence/ReferringPhysicianName/Ideogram/ Name of referring physician (ideographic characters)

33 /RecInfo/ScheduledProcedureStepSequence/ReferringPhysicianName/Phonogram/ Name of referring physician (phonetic characters)

34 /RecInfo/ScheduledProcedureStepSequence/RequestingPhysician/Name/ Name of requesting physician (full name)

35 /RecInfo/ScheduledProcedureStepSequence/RequestingPhysician/Alphabet/ Name of requesting physician (alphabetic characters)

36 /RecInfo/ScheduledProcedureStepSequence/RequestingPhysician/Ideogram/ Name of requesting physician (ideographic characters)

37 /RecInfo/ScheduledProcedureStepSequence/RequestingPhysician/Phonogram/ Name of requesting physician (phonetic characters)

38 /RecInfo/ScheduledProcedureStepSequence/InstitutionName/ Name of institution

39 /RecInfo/ScheduledProcedureStepSequence/RequestedProcedureID/ Requested procedure ID

40 /RecInfo/ScheduledProcedureStepSequence/RequestedProcedureDescription/ Requested procedure description

41 /RecInfo/RequestedProcedureCodeSequence/CodeValue/ Code value

42 /RecInfo/RequestedProcedureCodeSequence/CodingSchemeDesignator/ Encoding scheme designator

43 /RecInfo/RequestedProcedureCodeSequence/CodingSchemeVersion/ Encoding scheme version

44 /RecInfo/RequestedProcedureCodeSequence/CodeMeaning/ Code meaning

45 /RecInfo/PerformedSeriesSequence/PerformingPhysicianName/Name/ Name of performing physician (full name)


Appendix

46 /RecInfo/PerformedSeriesSequence/PerformingPhysicianName/Alphabet/ Name of performing physician (alphabetic characters)

47 /RecInfo/PerformedSeriesSequence/PerformingPhysicianName/Ideogram/ Name of performing physician (ideographic characters)

48 /RecInfo/PerformedSeriesSequence/PerformingPhysicianName/Phonogram/ Name of performing physician (phonetic characters)

49 /RecInfo/StudyDate/ Examination date

50 /RecInfo/StudyTime/ Examination time


59Appendix

60

Supported Network Cameras and Camera Servers (connectivity verified)

The system works with the following network cameras and camera servers with the following parameters.

Network camera (SNC-WR632/SNC-VM630)

Video codec

Audio codec

Camera server (SNT-EP104)

Video codec

Item Parameter

Video codec H.264

I-picture interval 1, 3, 5

Image size 1080/720/576/480/184p

Bit rate 8/4/1 Mbps

Frame rate 30/15/5/1

H.264 profile High/main/baseline

Bit rate compression mode’s CBR On/Off

Item Parameter

Audio codec AAC (64/128kbps)

Audio transmission On/Off

Item Parameter

Video codec H.264

I-picture interval 1, 3, 5

Image size 576/480/240p

Bit rate 4/1 Mbps

Frame rate 30/15/5/1

Appendix

About Account Roles

Access permissions for content by account role

Supported account role operations

Operations in the global area (iPad) and Archive screen

Account role Access permission

Integrator Viewing/editing of content and accompanying metadata belonging to all users and groups.

Manager Viewing/editing of content and accompanying metadata belonging to all users and groups.

Editor Viewing/editing of content registered by oneself and other content for which sharing permission has been granted.

Viewer Viewing of metadata for content for which sharing permission has been granted.

Area/screen Operation Integrator Manager Editor Viewer

Global area Archive screen and live screen switching

Yes Yes Yes Yes

Logging out Yes Yes Yes Yes

Launching the [Settings] dialog Yes Yes Yes Yes

Launching the [Upload] dialog Yes Yes Yes Yes

Launching the Admin Tool screen Yes Yes No No

Case list screen Calendar and search pane operations Yes Yes Yes Yes

Viewing cases Yes *1 Yes *1 Yes *2 Yes *2

Editing cases• Deleting cases• Merging cases

Yes Yes Yes No

Case properties screen

Viewing files Yes Yes Yes Yes

Deleting files Yes Yes Yes No

PACS registration Yes Yes Yes No

Copying files Yes Yes Yes No

Uploading files Yes Yes Yes No

Viewing case information Yes Yes Yes Yes

Editing case metadata Yes Yes Yes No

Sharing cases Yes Yes Yes No

File properties screen (common)

Editing file metadata Yes Yes Yes No

Viewing case information Yes Yes Yes Yes

Editing case metadata Yes Yes Yes No

Downloading files Yes Yes Yes No

Viewing other sources Yes Yes Yes Yes

Configuring URLs for sharing Yes Yes Yes No

File properties screen (video)

Playing files, timeline operations Yes Yes Yes Yes

Capturing Yes Yes Yes No

Invoking video edit mode Yes Yes Yes No

Displaying dual-play mode Yes Yes Yes Yes

61Appendix

62

*1: Displays all cases registered in CMS.*2: Displays cases belonging to the logged-in user and shared cases only.

Operations on the Admin Tool screen

The Admin Tool screen is not displayed for users logged in with Editor or Viewer role.

File properties screen (dual-play mode screen)

Playing files, timeline operations Yes Yes Yes Yes

Viewing file information and case information

Yes Yes Yes Yes

Selecting audio sources Yes Yes Yes Yes

Displaying single-play mode Yes Yes Yes Yes

File properties screen (still images)

Displaying full-screen mode Yes Yes Yes Yes

Displaying normal-screen mode Yes Yes Yes Yes

File properties screen (video edit mode)

Playing video Yes Yes Yes No

Editing video Yes Yes Yes No

Creating clips Yes Yes Yes No

Note

Screen Operation Integrator Manager

System analysis Viewing system information Yes Yes

Server Settings LDAP Server Viewing LDAP server settings Yes Yes

Editing LDAP server settings Yes No

Master Server Viewing master server settings Yes Yes

Editing master server settings Yes No

Import Server Viewing import server settings Yes Yes

Editing import server settings Yes No

Recording Server Viewing recording server settings Yes Yes

Editing recording server settings Yes No

System Settings General Settings Viewing general settings Yes Yes

Editing general settings Yes Yes

Metadata Viewing metadata settings Yes Yes

Editing metadata settings Yes Yes

Operating Room Viewing the operating room list Yes Yes

Editing operation room settings Yes Yes

Transcoder Viewing transcoder settings Yes Yes

Editing transcoder settings Yes Yes

Importer Viewing the recorder list Yes Yes

Editing recorder settings Yes Yes

Exporter Viewing the exporter list Yes Yes

Editing exporter settings Yes Yes

Users and Groups

Users/Groups Viewing users and groups Yes Yes

Editing users and groups Yes Yes

Roles Viewing roles Yes Yes

Job Job Viewing the job list Yes Yes

Editing job settings Yes Yes

Area/screen Operation Integrator Manager Editor Viewer

Appendix

Log Log Viewing operation logs Yes Yes

Downloading operation logs Yes Yes

Displaying system logs Yes Yes

Downloading system logs Yes Yes

Screen Operation Integrator Manager

63Appendix

Sony Corporation

Date post:	27-Oct-2019
Category:	Documents
Upload:	others
View:	9 times
Download:	0 times

Content Management System · test orders in a RIS (MWM) for specified patient IDs. Operating room...

Documents