CONTENTS 1. OUR COLLEGE 2. COURSES OFFERED 3. THE MANAGING BOARD 4. THE GOVERNING COUNCIL 5. ADVISOR 6. TECHNICAL ADVISORS 7. PRINCIPAL 8. FACULTY MEMBERS & ADMINISTRATIVE STAFF 9. COLLEGE FACILITIES 9.1 DEPARTMENTAL FACILITIES 9.2 LIBRARY 9.3 PLACEMENT CELL 9.4 CONDUCTING APTITUDE TESTS 9.5 MEMORANDUM OF UNDERSTANDING 9.6 PERSONALITY DEVELOPMENT PROGRAMME 9.7 STUDENTS COUNSELLING BY PROFESSIONAL COUNSELLER 9.8 COMPUTER COURSES 9.9 HINDI COURSE 9.10 SPORTS ACTIVITIES 9.11 COLLEGE INFORMATION FORUM 9.12 PHOTOGRAPHIC CLUB 9.13 CONTINUOUS EVALUATION 9.14 TAMILNAD MERCANTILE BANK LTD EXTENSION COUNTER & ATM 9.15 HOSTELS 9.16 CANTEEN 9.17 COLLEGE TUCKSHOP 9.18 COLLEGE BUSES 9.19 DISCIPLINARY COMMITEE 9.20 FINE ARTS CLUB 9.21 TECH - BEATS AND TECH - BAND 9.22 GARDENING CLUB 9.23 ROTARACT CLUB 9.24 BLOOD DONORS‟ CLUB 9.25 N.S.S 9.26 N.C.C 9.27 YOUTH RED CROSS 9.28 LEO CLUB 9.29 SCHOLARSHIPS 9.30 ENDOWMENTS 9.31 OTHER AMENITIES 10. RULES & REGULATIONS 11. PLANNER 2011-2012 12. TIME TABLE
Transcript
CONTENTS 1. OUR COLLEGE
2. COURSES OFFERED
3. THE MANAGING BOARD 4. THE GOVERNING COUNCIL
5. ADVISOR
6. TECHNICAL ADVISORS 7. PRINCIPAL
8. FACULTY MEMBERS & ADMINISTRATIVE STAFF
9. COLLEGE FACILITIES 9.1 DEPARTMENTAL FACILITIES
9.2 LIBRARY 9.3 PLACEMENT CELL
9.4 CONDUCTING APTITUDE TESTS 9.5 MEMORANDUM OF UNDERSTANDING 9.6 PERSONALITY DEVELOPMENT PROGRAMME
9.7 STUDENTS COUNSELLING BY PROFESSIONAL COUNSELLER 9.8 COMPUTER COURSES 9.9 HINDI COURSE
9.10 SPORTS ACTIVITIES 9.11 COLLEGE INFORMATION FORUM 9.12 PHOTOGRAPHIC CLUB
Web : http:\\kcetvnr.org Fax : 04549 - 278172 1. OUR COLLEGE :
Kamaraj College of Engineering and Technology is the outcome of the cherished desire and dream of the people of Virudhunagar. It is also a longfelt need of this region. It is
rightly named after the son of this soil, Bharat Ratna Sri.K. KAMARAJ who was the undisputed leader of the suppressed and downtrodden and a champion of free education for the masses.
Our College was established in the year 1998-1999. It is promoted and supported by Virudhunagar Hindu Nadars‟ Devasthanam, various Hindu Nadars‟ Mahamai Tharappus in
Virudhunagar and other places and educational institutions of Virudhunagar. The management of the institution consists of the elected members of various Mahamai Tharappus
of Virudhunagar. The Office-Bearers, the President, the Vice-President, the Secretary, the Joint Secretary and the Treasurer - are elected by the Managing Board Members.
2. COURSES OFFERED : The College is a co-educational institution. Presently it offers the following courses :
Intake 1. B.E. Computer Science and Engineering 120
2. B.E. Electronics and Communication Engineering 120 3. B.E. Electronics and Instrumentation Engineering 60 4. B.Tech. Polymer Technology 45
5. B.Tech. Information Technology 60 6. B.Tech. Biotechnology 60 7. B.E. Electrical and Electronics Engineering 60
8. B.E. Mechanical Engineering 60 9. B.E. Civil Engineering 60 10. M.Tech. Polymer Technology 18
The institution has been planned to be a model Engineering College. It envisages to produce highly qualified engineers with devotion to duty and dedication to service.
DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING :
1. Mr.G. Dhanabalan, M.E.,Ph.D., Asst. Professor / Department I/c 2. Ms.M. Vigneswari, M.E., Asst. Professor 3. Ms.J. Uma Maheswari, M.E., Asst. Professor
4. Mr.A. Rajavel, M.E., Asst. Professor 5. Mr.M. Durai Shanmugapriyan, M.E., Asst. Professor 6. Ms.L.V. Revathi, M.E., Asst. Professor
7. Mr.M. Sudalaimani, M.E., Asst. Professor 8. Mr.S. Palanivel Rajan,M.E., Asst. Professor
9. Mr.S. Vijayprasath,M.E., Asst. Professor 10. Ms.K. Hema latha,M.Tech.,Ph.D., Asst. Professor 11. Ms.E. Ahila Devi,M.E., Asst. Professor
12. Ms.R. Srimeena,M.Tech., Asst. Professor 13. Ms.A. Raja Gomathi, M.E., Asst. Professor 14. Mr.B. Parameswaran, M.E., Lecturer
DEPARTMENT OF INFORMATION TECHNOLOGY 1. Ms.P. Vijaya Lakshmi, B.E., M.S., Ph.D., Associate Professor/ Department I/C 2. Mr.N. Senthil Madasamy, M.E., Asst. Professor
3. Ms.E. Vakaimalar, M.E.,Ph.D., Asst. Professor 4. Ms.C. Anitha, M.E., Asst. Professor 5. Ms.P. Antony Seba, M.E., Asst. Professor
6. Ms.D. Gayathri Devi,M.E., Asst. Professor 7. Mr.S. Radha Krishnan, M.Tech.,Ph.D., Asst. Professor 8. Ms.R. Arthy, M.E., Asst. Professor
9. Ms.M. Chengathir Selvi,M.C.A.,M.Phil.,M.E.,Ph.D., Asst. Professor 10. Mr.S. Binu,M.E. Asst. Professor 11. Ms.P. Rajalakshmi, M.Tech., Asst. Professor
12. Ms. K.X.Jhansi, M.Tech., Asst. Professor 13. Ms.S. Priya,M.E., Asst. Professor
2. Dr.S. Kalyani, M.E.,Ph.D., Professor 3. Ms.S. Nagalakshmi, M.E., Ph.D., Asst. Professor 4. Ms.S. Anbarasi, M.E.,Ph.D., Asst. Professor
5. Mr.M. Kandasamy, M.E., Asst. Professor 6. Mr.S. Rajesh Babu, M.E.,Ph.D., Asst. Professor 7. Ms.R. Shanthi, M.E., Asst. Professor
8. Mr.V. Vignesh Kumar, M.E., Asst. Professor 9. Ms.M. Shunmugathammal,M.E.,Ph.D., Asst. Professor 10. Ms.M. Sivapackiavathi, M.E., Asst. Professor
11. Mr.M. Prakash, M.Tech., Asst. Professor 12. Ms. S. Chithra, M.E., Asst. Professor 13. Ms.S. Sangeetha,M.E., Asst. Professor
14. Ms.B. Sankareswari, M.A., Department Clerk 15. Mr.L.S.Murugan, I.T.I Skilled Assistant 16. Mr. P. Jeyavivek, D.E.C.E., Skilled Assistant 17. Mr. P. Ponraj Assistant
/8/
DEPARTMENT OF BIO-TECHNOLOGY 1. Dr.M. Vasanthi, M.Sc., Ph.D., Professor/Department I/C
2. Dr.S. Bakthavatsalam, M.Sc., Ph.D., Professor 3. Dr. T. Nagarajan, M.V.Sc., Ph.D., Associate Professor 4. Mr.S. Maria Amal Raj, M.Tech.,Ph.D., Asst. Professor
5. Ms.V.S. Padma @ Dhivya, M.Tech., Asst. Professor 6. Mr.B. Rengesh, M.Tech., Asst. Professor 7. Ms.M.C. Drishya,M.Tech., Asst. Professor
8. Ms.M. Soundarya Lakshmi,M.Tech., Asst. Professor 9. Mr.S. Manibalan, B.Pharm.,M.Tech., Asst. Professor 10. Ms.K.S. Vijayalakshmi,M.Sc.,M.Tech.,Ph.D., Asst. Professor
11. Mr.S. Karthi Kumar, M.Sc., M.Tech.,Ph.D., Asst. Professor 12. Ms.V.G.P. Swarna @ Asha Devi,M.Tech. Asst. Professor 13. Ms.V. Shunmuga Priya,M.Tech., Asst. Professor
14. Mr.A. Abdul Rahman, M.Tech., Asst. Professor 15. Ms.K. Geetha, M.Sc.,Ph.D., Asst. Professor 16. Ms.K. Mohana,M.Sc.,M.Sc.,M.Phil.,M.Tech., Asst. Professor
17. Ms.K.C. Nithya Devi, M.Sc.,M.Tech., Asst. Professor 18. Ms.J. Mercy Nisha Pauline,M.Tech., Asst. Professor
P.G. COURSE :
19. Dr. Anant Achary, M.Tech., Ph.D., Professor 20. Mr.I. Ganesh Moorthy, M.Tech.,Ph.D., Asst. Professor 21. Ms.V.A. Mathura,M.Tech., Asst. Professor
4. Ms. P. Mahalakshmi, M.Sc., M.Phil., Asst. Professor 5. Ms.M. Geetha,M.Sc.,M.Phil., Asst. Professor 6. Ms.S. Kalaimathy, M.Sc., M.Phil., Asst. Professor
7. Ms.N. Nagajothi, M.Sc., M.Phil., Asst. Professor 8. Ms.C. Revathy, M.Sc., M.Phil., Asst. Professor 9. Ms.K. Ananthi, M.Sc., M.Phil., Asst. Professor
10. Ms.P. Mareeswari, M.Sc., M.Phil., Asst. Professor 11. Ms.S.Priyadharshini, M.Sc.,M.Phil., Asst. Professor 12. Ms. A. Angel Gnanamani, M.Sc.,M.Phil., Asst. Professor
13. Mr. T. Ramesh Babu,M.Sc.,M.Phil., Asst. Professor
PHYSICS
1. Dr.K. Balachandra Kumar, M.Sc., Ph.D., Associate Professor 2. Dr.M. Hema, M.Sc.,Ph.D., Associate Professor
3. Dr.B. Karthikeyan, M.Sc.,Ph.D., Associate Professor 4. Mr.R. Karthikeyan, M.Sc., M.Phil. Asst. Professor 5. Mr.K. Sakthiraj, M.Sc.,M.Phil., Asst. Professor
6. Mrs.A. Yelilarasi, M.Sc., M.Phil.,Ph.D., Asst. Professor 7. Ms.M. Shanthi, M.Sc., M.Phil., Ph.D., Asst. Professor 8. Ms.S. Jothi, M.Sc., M.Phil., Asst. Professor
9. Ms.S. Deepika, M.Sc., M.Phil., Asst. Professor 10. Ms. Vini Thomas, M.Sc.,M.Phil Asst. Professor
3. Ms.S. Shamim Rishwana, M.Sc., M.Phil.,Ph.D., Asst. Professor 4. Ms.J. Dhanalakshmi, M.Sc., M.Phil.,Ph.D., Asst. Professor 5. Ms.V. Kohila, M.Sc., M.Phil.,Ph.D., Asst. Professor
6. Mr.K. Rajakumar, M.Sc., Ph.D., Asst. Professor 7. Mr.B. Rajkumar, M.Sc.,M.Tech., Asst. Professor 8. Ms.S. Luna Eunice, M.Sc.,M.Phil, Asst. Professor
9. Ms.N. Rajeswari, M.Sc.,M.Phil., Asst. Professor 10. Mr.A.R. Siva kumar,M.Sc.,M.Phil., Asst. Professor
9.1 DEPARTMENTAL FACILITIES : COMPUTER SCIENCE AND ENGINEERING DEPARTMENT :
To meet the demands of Industries, the computer department of our College has a well modernized computer centre. It is fully installed with 148 systems.
All the systems in our College are connected with the above mentioned servers. We have colour scanners and Ink-jet Printers. The software available in the Computer Centre are
licensed, latest and popular. 10 Mbps dedicated line is available. MSDN - Academic Alliance (MSDNAA) :
Our department has agreement with Microsoft for all licensed products of microsoft.
Licensed Legal Software : Windows 2008 Server, Windows 2003 Server, Windows 2000 Server, SCO UNIX V,
Linux 7.1, Novell 5.11, Windows 2000 Professional, Windows XP Professional, Windows Vista, Windows 7, Visual Studio 6.0, Oracle 8i, Borland C++ 4.5, MS Office 2003, e-Trust Antivirus Package, Rational Rose Software, SQL Server, Visual Studio .NET.
Operating Systems :
SCO Unix Open Server Rel 5, Linux 7.1, Novell Netware Servers 5.11, Windows 2008 Server, Windows 2003 Server, Windows 2000 Server, Red Hat Linux 7.1.
Multimedia : Macromedia Director, 3D Studio Max, Adobe Photoshop, Adobe Photo Deluxe, Flash.
Department library :
More than 1000 books are available in the department library for the knowledge up gradation of the students.
/16/
ELECTRONICS & COMMUNICATION ENGINEERING DEPARTMENT : The Electronics era has transcended macro into micro and accelerated growth in the
field of communication Engineering. To supplement the theoritical concepts with practical knowledge of the students, we have the following laboratories in our Campus.
1. Electronic Devices and Circuits Lab : This lab is well equipped with latest equipment like all types of power supplies,
Scientific CRO (30 MHz) (both single & dual Beam), audio & high frequency oscillators, frequency counters, analog & digital multi meters and Digital storage oscilloscope. Latest simulation software Tinapro, ORCAD PSPICE 16.2 pspice software is also available.
2. Linear and Digital IC Lab :
This lab is provided with linear and digital IC trainer kits, digital IC tester, Function generator, Multi-output power supplies CRO and a plenty of basic and advanced IC‟s.
3. Digital Signal Processing Lab :
For improving the signal processing skills of our communication department students, the lab is equipped with TMS320C25, TMS320C33, TMS320C50, TMS320C5416, TMS 320C6713, ADSP2105, ADSP2181 processor kits and Matlab software.
4. Digital Image Processing Lab :
To process all kinds of images and noise removal for quality improvement, latest hardware and software are available in this lab.
5. Analog and Digital Communication Lab : It is highly equipped with all types of analog, digital modulation kit, multiplexing kits,
Transmitter and Receiver kit.
6. Optical Communication Lab :
Optical Lab explores areas such as optical communication lab, Laser Optical Lab, Holography Lab.
7. Microwave Communication Lab :
The state-of-art fully air conditioned microwave lab consists of 5 work benches in J-band and X-band, Klystron and Gunn Oscillators for generating microwave frequencies in 4 -12.4 GHz range.
8. RF Antenna Lab :
The newly established RF Lab is fully equipped with leading brand equipments. The lab consists of RF sources, spectrum Analyzer 100 MHz CRO, 100 MHz DSO, Sets of Complete Antenna equipment. These facilities support designing, verification and implementation
stages, thereby providing an ideal platform to foster developmental activities of the students.
/17/
9. Microprocessor and Microcontroller Lab : This laboratory is well equipped with Intel 8085, Intel 8086, Zilog Z80, Processors,
Intel 8031, Motorola 6811 and PIC Micro controllers. All modern equipment like EPROM programmer, EPROM eraser, traffic light controllers, A/D, D/A Convertors, stepper motors and universal PIC Microcontroller with Ride / Keil software are integrated together to promote our
students as intellectuals in the field of system designing. PC based MASM assembler for 8086 processor is available to perform the programs in PC itself.
10. VLSI Lab : The newly established VLSI Lab is equipped with VLSI Design Trainer kit. Design tools
like Xilinx and Model sim are also available. So students can learn Verilog & VHDL languages. Further, we have facilities to encourage the students to take active part in technical
seminars, symposia and conferences. They have also been encouraged to take part in the cultural activities and fine arts competitions conducted in other colleges. Students are motivated to play an active role both in curricular & extracurricular activities.
Department library :
More than 946 books are available in the department library for the knowledge up gradation of the students.
ELECTRONICS AND INSTRUMENTATION ENGINEERING DEPARTMENT :
Electronics and Instrumentation Engineering is industry oriented. The modern trend is to control and maintain all the industrial parameters thro‟ Electronic devices and Computer systems.
1) Industrial Instrumentation Lab :
The Instrumentation Lab is provided with measuring devices like thermistor, Thermocouple and RTDs for temperature, Dead weight tester, Vaccum Pressure Gauge for
Pressure, Rotameter, Orifice meter, Venturi meter and Electromagnetic flow meter for flow measurement, spectrophotometer for analysing the concentration of liquids, paramagnetic analyser, ECG recorder, B.P. apparatus, transducers to measure various parameters like
strain, PH, wind speed, viscosity, vibration etc.
2. Process Control Lab : The Process control lab has different types of controller gadgets like ON/OFF
controller, Proportional, Proportional + Integral, Proportional + Derivative, PID, P to I & I to P converters, D.C. position Servo Control System, Temperature, Level, Flow and Pressure Process stations, Bottle filling system using PLC, SCADA software with DCS, MATLAB
Package. Two tank system with provision for making them as interacting & noninteracting, Level
transmitters, flow transmitter, Cascade control system, Control valve with positioner and control valve without positioner.
/18/
3. Transducer Lab : Important transducers such as Displacement, Pressure, Temperature, Flow, Level
transducers are available in this Laboratory. Students are also motivated to take additional course of studies in the field of
Computer Software also. This will facilitate them to compete with their counterparts in the software industries.
4. Electronics Devices Lab : This lab is well equipped with latest Equipments like power supplier (single K dual),
Scientific CRO, audio and high frequency oscillators, digital multimeters. The electronic circuit simulation software MULTISIM is available for circuit designing.
5. Computer Control Process Lab : The CCP lab has PLC unit, Bottle filling system using PLC, Data acquistion card, Liquid
level control system, Thermal system, DCS, MATLAB package, SCADA software with DCS, TUTSIM, CIMPLICITY, VERSAPRO etc.
Memorandum of Understanding :
Our department has signed MOU with the following industry which enhances the teaching-learning process.
National Instruments, Bangalore.
Along with these companies we are involved with the following activities, * Placement
* Student Project * Research Project * Consultancy Project
6. Virtual Instrumentation Lab:
Lab is equipped with licensed LABVIEW Software for 50 users and hardwares for interfacing with real time environment.
Department library : More than 150 books are available in the department library for the knowledge up
gradation of the students.
/19/
POLYMER TECHNOLOGY DEPARTMENT :
Polymer Technology is a unique branch of Engineering which is offered only in our College in the Southern part of Tamilnadu. Polymer Science and Technology is a marvellous subject and has developed tremendously over the last few decades and the production of
polymers has increased remarkable. Polymers have no counterpart in terms of weight, fabrication, efficient utilization and economics. So the growth of the polymer industry is continuing at a faster rate than that of any other industry. Our department is accredited
by National Board of Accreditation, New Delhi for three years from 19.07.2008. We have started M.Tech. Polymer Technology course during the academic year 2009-2010. Center for Research has also been established from 2009-2010 onwards.
1. Polymer Preparation / Chemistry Laboratory
In order to know the chemistry of polymer synthesis, the laboratory has been developed with highly effective equipment for Polymer Preparation and also different analytical instruments like Fourier Transform Infra Red Spectroscopy (FTIR), Ultraviolet (UV)
Spectrophotometer and Flame photometer.
2. Polymer Processing Laboratory In order to get an efficient practical exposure in the field of polymer processing, the
laboratory has been fully modernized with sophisticated machineries like fully Automatic Injection Molding Machine, Blow Molding Machine, Semi-Auto Injection Molding Machine, Compression Molding Machine, Extruder, Two Roll Mills etc.
3. Polymer Testing Laboratory
Testing Lab is equipped with sophisticated instruments like Universal Testing Machine (UTM), Melt flow index, HDT/VSP, Impact Tester, hardness Tester, Thermogravimetric Analyser (TGA), Differential Scanning Calorimeter (DSC) etc. for various testing viz.
Mechanical, Thermal, Optical and Electrical Properties. Department Library :
To provide the knowledge of our young budding engineers, our department has been provided with books on advanced & basic subjects related to Plastic Materials, Polymer
Process Engineering, Production of Synthetic fibres, Design Databook, How to make Injection Molds, Recycling Recovery of Plastics, Plastic Additives, ASTM standards for Rubber & Plastic Products.
Placement Cell :
Keeping in view the importance of evolving a comprehensive awareness of job opportunities, a placement cell has been developed in our department itself. The cell strives
hard to implement various plans to improve the competence of our Polymer technocrats and thereby to ensure a substantial increase in the employment of our students in reputed industries.
/20/
External Sponsored Projects : One of the most important metrics of academic excellence is our research output.
With great confidence, our department is continuously making persistent efforts to carry out, two central works - teaching and research. The research activities being undertaken by our department include two DRDO sponsored projects, one IGCAR project and one DST
sponsored project, worth 117.67 Lakhs. INFORMATION TECHNOLOGY DEPARTMENT :
The Department has an excellent infrastructure with 256 systems in the lab. The Department has experienced faculty members who can exert a dedicated work to produce high
calibre technocrats. Information Technology Lab :
Configuration of PC [80 systems] : Intel Core 2 Quad 2.5 GHz, 2 GB DDR2 RAM, 320 GB SATA HDD, 15.6” wide Acer TFT Monitor.
Configuration of PC [30 systems] : Core 2 Duo 2 GHz, 1GB DDR2 RAM, 160 GB HDD,
17” TFT Acer Wide Monitor. Configuration of PC [20 systems] : Wipro Pen-D 2.8 GHz 2MB 800 FSB, 512 MM DDR2
533 MHz, 80 GB 7200 RPM SATA 150 IIDD, Wipro 15” CRT Color Monitor. IEEE - KCET Student Chapter:
Department Coordinates students and staff in IEEE, the world‟s largest professional association for the advancement of technology by bringing together more than
3,80,000 of the worlds most innovative minds in more than 160 countries. IEEE members are committed to fostering technological innovation to benefit humanity. IEEE members give a chance to learn from and give back to the profession at every level. IEEE members have an
opportunity to share knowledge, collaborate with others and contribute to the humanitarian efforts.
MOU with National Aerospace Laboratories, Bangalore: The Department has made a MOU with National Aerospace Laboratories (NAL),
Bangalore on 09.12.2010 for student‟s project at NAL for 3 years. NAL is a constituent Institution under CSIR, India. It is India‟s civil aerospace Laboratory with a high level of competence and the expertise of its scientist is globally acknowledged. One team of our
students from 2011 Batch has completed their academic project at NAL, Bangalore.
/21/
Certification courses: CCNA Certification:
The Department conducts CCNA (Cisco certified Network Associate) certification courses for our students. CCNA Certificate validates their ability to install, configure, operateand
troubleshoot medium size route and switched networks. CCNA Curriculum in cludes basic mitigation of security threats, and wireless networking concepts. It is a performance based examination. It also includes use of protocols, IP, EIGRP RIPV2, VLANS, Ethernet, ACL.
Red Hat Linux Certification:
The Department coordinates LINUX Certification course for students of CSE, IT, M.Sc., degree program. Red Hat Linux certification is a credential to professionals that
demonstrates the core system administration skills and offers other related skills in database administration and suport technical. RHCA certification offers a breadth and depth knowledge in advanced networking services, security, system monitoring and performance tuning.
Software Engineering Lab I : Configuration of PC : Wipro 4845 GV Main Board, PIV 2.4 GHz - 1 MB Cache, 1 GB DDR
Configuration of PC : Wipro 4845 GV Main Board, PIV 2.4 GHz - 1 MB Cache, 1 GB DDR RAM, 512 GB IIDD, Wipro 17” CRT Colour Monitor.
Servers : Oracle, NT 2003, UNIX, Novell and Linux
All the systems in the lab are connected with LAN using OFC. The lab has Colour Scanner, Laser Printer and 12 Dot Matrix Printers.
Department Library :
Our Library contains more than 800 text books to enrich the knowledge of students. To update the latest information, the department has a reading hall where the students read the Newspapers.
Additional Course offered to the Students :
VB 6.0, Oracle 8i, IDL 6.3, Turbo C, NS2, CCNA & Red hat Linux
/22/
Licensed Softwares : Windows 98, Novell Client Software 2000, Visual Studio 6.0, Oracle 8i, Matlab 6.1,
Borland CII 4.5, MS Office, Basic, Fortran, COBOL, Pascal, AutoCAD 2006, Norton Antivirus 5.1 Packages, Lotus Smart Suite, Rational Rose Software, Pro E.
Solaris 2.6, SCO UNIX open server Release 5, Linux 7.1, MS Dos 6.22, Novell Netware Server, Windows 2000 Advanced Server, Windows NT Server Enterprises 5.0, Windows 2003 Server, Red Hat Linux 7.1, Macromedia Director, 3D Studio MAX, Adope Photoshop, Adope
This innovative study programme offers a deep insight into the concepts, practices methodologies used in the field of engineering for software application developments. The
study of these concepts, practices and methodologies is directed towards helping the students to acquire the basic skills and knowledge for developing software products and working on software space. The curriculum pattern is to meet the global standards of IT
education with the wide Choice of electives from 24 recent areas of functional IT subjects.
Department Library : To contribute to the fulfilment of the Department‟s mission and to enhance the
academic community‟s vision, our department has been provided with specialized collection of books based on IT-oriented subjects such as Database management systems, Operating systems, Computer networks, Network security, Software architecture, design, testing, etc.
Software Lab :
Deals with practical implementation of the software development life cycle, reusability features, and object oriented design.
Software Testing Lab : The objective of this lab is to improve the ability of our budding engineers in testing the
functionality of the software applications by verifying and validating them with various testing approaches.
CASE Tools Lab : The purpose of this lab is to make our students capable of developing the blue print of
any software applications with exact analysis and design using Rational Rose Enterprise Edition Package. This is the licensed product developed and released by IBM.
Our department assures that we are providing the nation technically, ethically well built and socially responsible citizens with high moral.
Our exclusive focus is on preparing our students to become the top notch IT professionals in the global market.
Furthermore, those who are pursuing M.Sc. (Software Engineering) can continue their Ph.D. programmes, since the course itself is a master degree course.
/23/
ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT : Telecommunication and Power are the back-bones for the development of economy and
both command a high importance in the development of the infrastructure of any developing country. Though the need for computer qualified engineers are in upward trend now, Indian power sector, is at present facing a great challenge to meet the rapid growth in
power demand. The projected demand in the next ten years is going to be of the order of 1,56,000 MW, to meet such a galloping demand, generation, transmission and distribution system also need to be developed. Electrical Engineering is the basic Engineering with more
emphasis on Electronics suitable for high power engineering applications. 1. Electrical Circuits & Machines Lab :
Electrical Circuits & Machines Lab is equipped with all kinds of electrical machines like DC & AC and special machines like Double Speed Induction machine.
2. Measurements and Control Lab :
Measurements and Control Lab is provided with different types of analog and digital measuring devices and control equipments for different applications.
3. Power Electronics Laboratory :
Power Electronics Laboratory is provided with all power electronic circuit modules which can be used for the control of electrical machines and for the conversion of electrical power.
4. Electronics Lab : Electronics laboratory is provided with signal generators, power supplies, cathode ray
osciloscopes to carry out Electronic circuits and Linear Integrated Circuits Laboratory subjects.
5. Microprocessor and Microcontroller Lab : Microprocessor and microcontroller laboratory help the students enhance their
knowledge about various processors such as 8085, 8031/8051 and interfacing. The features and facilities available in this lab help the students to do their mini projects as a part of their curriculum and enhance their knowledge about the latest trends and technologies -
Intel 8085 Microprocessor Kit 8031/8051, Micro Controller kits with Interface, Stepper motor interface, ADC & DAC interfacing and various interfacing cards.
6. Power System Simulation Lab : Power System Simulation laboratory is provided with 30 PCs with software technical
packages like PSCAD/EMTDC, ETAP, MATLAB to carry out various laboratory work, research and training in the areas of Power Quality, Power System Operation and Optimization, Analog and Digital Protection, Power System Automation and Control, Distribution System Analysis,
Economic Operation of Power System and Power System Communication.
/24/
BIOTECHNOLOGY DEPARTMENT : Just as “IT” was referred to as “India‟s Tomorrow” by our former Prime Minister Sri Atal
Bihari Vajpayee, Biotechnology may indeed become “Bharat‟s Tomorrow”. Biotechnology has made significant advances in recent years and emerged as a frontline area of research and development, with an overwhelming impact on the society. Each new achievement is
expanding its horizons. Once Dr.A.P.J.Abdul Kalam shared his experience when he was in Anna University, Chennai. He said that a patent was obtained for a new molecule discovered from an herb as an anti cancer drug. This came out of the fusion of two great
minds. One was a Biotechnologist and the other was a traditional siddha medical practitioner. The human genome project has opened new frontiers in medical fields with application
in gene therapy; more than 100 new breakthroughs Bio pharmaceuticals, vaccines and new technologies have helped million of people world wide. So at a very appropriate time to disseminate information in the area of Biotechnology, we have started B.Tech.
(Biotechnology)course during the academic year 2002-2003 and M.Tech. Biotechnology during the academic year 2009-2010.
Our Department has been approved by Anna Universtiy, Tirunelveli as the Centre for Research in the year 2011. Dr.Anant Achary and Dr.T. Nagarajan has been recognized as
Research supervisors for Ph.D. Programme.
Department of Biotechnology has received grant from DRDO for three scientific
projects. One is on going and the other two have been successfully completed. It has also received grant from Tamil Nadu State Council Science and Technology (TNSCST) in the year 2008 and 2009. Department of Biotechnology has also received grant from AICTE, New Delhi
Under Research Promotion Scheme for the year 2010-11. The department has also received a grant from AICTE in 2011 to organize National level conference.
In the year 2004, this Department was ranked Second among the Engineering Colleges affiliated to Anna University, Chennai, Tamil Nadu, which are offering Biotechnology Course according to a survey report conducted by A.C. Neilson group on behalf of Sun T.V. AS
per BIOSPECTRUM (a Cyber Media Magazine) Survey in the year 2008, the department has achieved 9th Place for infrastructure facilities and 14th place in overall performance among private institutions providing Biotechnology education in India. Department of Biotechnology
has been accredited by NBA, AICTE, New Delhi for three years from 2009-2012. So far, we have invested about 7.5 crore rupees on the Infrastructure Development for various Laboratories in Biotechnology viz. Cell Biology,Instrumental Method of Analysis, Molecular
Biology, Bioprocess Technology, Downstream processing Immuno Technology etc. Four of our staff members have received Young Scientist Fellow Ship Award from Tamil
Nadu State Council for Science & Technology. One Staff received summer research fellowship from Indian Academy of Science in the year 2008-09.
Molecular Biology, Genetic Engineering & Immunology Lab : This lab is equipped with sophisticated instruments like light, inverted & fluorescent
microscopes, micro plate reader, electroporator, thermocycle, pH meter, digital spectrophotometer & gel documentation system to perform academic experiments as well as innovative ideas of students in the form of mini projects.
/25/
Immunology Lab This lab is equipped with Light Microscope, Inverted Microscope and Fluorescent
Microscopes, Micro titer well Plates & Plate reader, kits for WIDAL & VDRL tests, immuno electrophoresis plates, apparatus and kits and Millipore water purifier.
Bioprocess Engineering Lab : It is a unique workspace for students, faculty, and researchers in bioprocessing which is
fully equipped with standard lab equipments including 80oC deep freezer UV - visible spectrophotometer, refrigerated centrifuge, laminar hood, table top centrifuge. The laboratory is well equipped to perform aerobic and anaerobic culture studies in pilot
fermentor, modular baby fermentor and photo bioreactor. Downstream Processing (DSP) & Instrumental methods of Analysis (IMA) Lab :
Both the laboratories are presently well equipped with HPLC, Lyoplizer, Spray drier, Ultrasonicator, Homogenizer, foam Fractionation column, Incubators, orbital incubator Shaker,
Hot air oven, Freezer (-20oC & -80oC), Heating mantle, colorimeter, photofluorometer, turbidity meter, BOD sensor, 2D electrophoresis apparatus etc., .
Department Library :
Our department library contributes to the fulfillment of the department‟s mission and to enhance the academic community‟s vision. Our department has been provided with specialized collection of books based on biotechnology oriented subjects, such as Bioprocess
Engineering, Biochemistry, Downstream processing, Environmental biotechnology, Cell biology, Microbiology, Food biotechnology, Immunology etc. And also our department library has a collection of foreign author books which are maintained as e-library. For the
better understanding of the technical concepts we have Animation CDs. MECHANICAL ENGINEERING DEPARTMENT :
1. Basic Workshop :
To develop basic engineering skills of the students, the workshop is equipped with fitting tools, carpentry tools, plumbing tools, moulding and smithy practices.
2. Manufacturing Technology Lab : To have hands on experience of various manufacturing methods, the lab is
equipped with Lathe, Shaping machine, Drilling machine, Milling machine, Surface grinding machine, gear hobbling machine, Cylindrical grinding machine, Bench grinding machine, Welding machine and supported with measuring instruments like Vernier caliper,
Micrometer, Vernier height gauge, Gear tooth vernier, Sine bar and sine center with slip gauges set, Bevel protractor etc.
3. Fluid Mechanics Lab : To understand the theoretical concepts and to study the performance and to
determine the co-efficient constants, the lab is equipped with centrifugal pump test rig, Reciprocating pump test rig, Gear pump test rig, pipe friction apparatus, Jet pump test rig, Rota meter, Pelt on wheel, Francis turbine, Kaplan turbine, Rectangle & V-notch test rig,
Nozzle meter, Venturimeter Test rig, Pitot tube test rig, Hydraulic trainer kit.
/26/
4. Thermal Engineering Lab :
The lab is equipped with 4 stroke Diesel engine test rig with Morse test facility. 4 stroke diesel engine test rig. 2 stroke Petrol engine test rig, 4 stroke diesel engine model, 2 stroke petrol engine model, 4 stroke petrol engine model, Stefan Boltzmann apparatus,
Natural convection apparatus, thermal conductivity of insulation powder apparatus, Reciprocating air compressor test rig, Refrigeration test rig.
5. CAD/CAM Lab : The lab is equipped with a CNC trainer lathe and a CNC Milling Machine. Also we
have two Fanuc Controller based CNC trainer software. Our CAD Lab is equipped with Pro-E wildfire 3.0 (5 User) and Autodesk Mechanical Solution Set Software which includes Auto CAD 2008 (10 User),Inventor(10 User), Auto CAD Electrical (10 User), Solid
Works 2008 (10 User) and Ansys 11.0 (30 User) 6. Strength of Materials Lab :
This lab is provided with UTM, Hardness Tester, Izod / Charpy Impact Tester,
Muffle furnace, Spring Testing Machine, Deflection Testing Apparatus.
7. Dynamics Lab : This lab is provided with Universal Governor Apparatus, CAM Analyser, Motorized
Gyroscope, Vibration table, Turn table Apparatus, whirling of shaft, Balancing of rotating mass compound pendulum and various vibration setup (Torsional, cantilever and Transverse).
8. Metrology & Measurement Lab : Engineering students need to have hands on experience to relate their theoretical
concepts with practical. For this, Metrology & Measurement Lab is provided with Profile projector, Vibration measuring setup, Displacement measuring setup, Toolmakers microscope, Auto Collimator & Floating Carriage micrometer.
9. Mechatronics Lab :
This lab is provided with pneumatic trainer kit, Process Control trainer kit microcontroller kit and LABVIEW Software.
10. Steam Lab : We have steam lab with non-IBR Boiler, Turbine, separating, Throttling
calorimeter. Department Library :
Our department library has 515 books and is open for student‟s reference use between 12.40 p.m. to 1.30 p.m. and 4.45 p.m. to 5.45 p.m. In addition to reference, the
students may borrow one book against his name.
/27/
CIVIL ENGINEERING DEPARTMENT : Civil Engineering is the mother of all engineering disciplines - so proclaim the proud civil
engineers. The Department of Civil Engineering in Kamaraj College of Engineering & Technology recognizes the need to the time and provides for the engineering enterprise in the field. The department has experienced faculty members where can exert and a dedicated work
to produce high calibre techrocrats. All laboratories are well-furnished with the latest electronically controlled instruments. Some of the sophisticated equipment available in the laboratories are :
1. Strength of Materials Laboratory :
This lab is well equipped for testing structural materials including steel, timber, concrete etc., and have UTM & compression testing machine.
2. Survey Laboratory : This lab is used to study about the Theodolite and Total Station and to learn how to
work with the above instruments & to learn to run a traverse, and to determine the distances using, chain compass and plane table. In survey lab we are having high expensive equipment
(Total station) which is very useful for practice and field work. 3. Computer Aided Building Drawing :
At the end of this course the student should be able to draft on computer building drawings (Plan, elevation and sectional views) in accordance with development and control
rules satisfying orientation and functional requirements. We are going to purchase 40 systems which will be installed with all civil software‟s for the students will be given and continuous training.
4. Fluid Mechanics & Hydraulics Laboratory :
The Fluid Mechanics Laboratory involves a wide range of basic as well as applied experimental and theoretical research in fluid mechanics. The activities are focused on the physical understanding, modelling and manipulation of complex flow and their instabilities.
The main objective of this laboratory is that the students should be able to verify the principles studied in theory by conducting the experiments.
5. Environmental Engineering Laboratory: This lab is equipped with sophisticated facilities for training students in water quality
studies and management some of the facilities available include Gas chromatograph, Ion selective Electrode meter, and microbiological investigation facilities. The laboratory is extensively used in several water quality monitoring projects with special emphasis on
fluoride problem in drinking water.
6. Concrete & Highway Laboratory:
This laboratory has facilities for testing cement, aggregates & asphalt, concrete mix design, material testing and Non-distructive testing of concrete are the facilities which are
being utilised by construction organizations like PWD, Railways etc., through the consultancy cell.
/28/
7. Soil Laboratory: This Laboratory houses the equipment for soil testing. This lab is used to determiine the
shear parameters, using direct shear apparatus, unconfined compression apparatus, Triaxial shear test apparatus. This lab is also used to determine the consistency, plasticity Indes, Plastic limit, shrinkage limit, Liquid limits and relative density of soil.
Department Library:
Our department library has 143 books and is open for student‟s reference / used between 12.40 p.m. to 1.30 p.m. and 4.45 p.m. to 5.45 p.m. In addition to reference, the students may borrow one book against his name.
Placement Cell:
Keeping in view the importance of evolving a comprehensive awareness of job opportuniteis, a Placement cell is going to implement in our Department.
First Year Department :
We have a workshop with Fitting and Carpentry, fully equipped Physics Lab and Chemistry Lab.
Department of English : Technical Communication has been brought to the forefront, since the boom in infotech
industry and globalisation. Due to the insistence of the importance of communication skills, the need for improving English language has gained momentum in recent years. In this scenario, the contributions of the department of English in
imparting communication skills and functional grammar in English are significant. The Department of English is equipped with two high - tech labs, one for
developing listening skills among first year students which is the need of the hour and the other lab for making power point presentations by the students. The strength of the department is our qualified and seasoned faculty. Stress is laid on improving the listening,
reading, speaking and writing skills of the students.
Language Lab : The ReLAN Pro is a software based media lab that operates via Local Area
Network and offers a suite of features focusing on computer aided language training. It is an instructional system that performs and delivers. It is easy for both the Instructor and the student to navigate and use.
Department Library :
With the whole world becoming a global market and business becoming diverse and result-oriented, professionals and technocrats are facing newer challenges in communication everyday. So we provide many books and CDs to students to cultivate their knowledge and
to improve their stock of words.
/29/
BEC : We offer BEC course under the guidance of British Council. The Business English
Certificate (BEC) examination is conducted by the University of Cambridge. Many Universities in the United Kingdom recognise BEC Higher as a suitable entry requirement for international students to business - related and other courses of study. Many companies also
recognise BEC examinations as additional qualification during recruitment. Department of Mathematics :
We have a department Library with 300 books. To develop the creative thinking and better understanding in Maths, we started “Talc INTIA” Club in the academic year 2002-2003.
Interested students are encouraged to become the member of the club. Students are encouraged to take part in Mathematics symposiums & competitions.
Department of Physics : Well equipped, modernized physics laboratory has been established. Spectrometers,
Hall-effect-spectrometer, He-Ne Lasers, Michael son interfewmeter, optical polarizer are available for the students. High energy ball mill BOD incubator, pH meters, Microwave
generator are also available for Research purposes. Department of Chemistry :
Chemistry is the most central of all the sciences. Much of our understanding of the material world is based on the areas of Chemistry such as inorganic, organic and physical.
Chemistry plays a vital role in engineering and technological disciplines also. The Department consists of seven academic staff with two doctorates. The department staff members are also actively involved in the research encompassing polymer, synthetic and adsorption
chemistry. The department laboratory is well equipped with sophisticated instruments to cater to the needs of engineering students of all disciplines. Our department Library contains over 100 text-books and reference books. The department has also established a strong linkage
with industries for consultancy services.
9.2 LIBRARY : Digital Library :
A Digital Library is a library in which collections are stored in digital formats (as opposed to print, microform or other media) and accessible by computers. The digital
content may be stored locally, or accessed remotely via computer networks. A digital library is a type of information retrieval system.
In our College, Digital Library has been built up in 14400 sq.ft. with three sections of calm AC Reading Hall. Our library has a collection of 58490 volumes of books and 12449 titles in a variety of Engineering subjects. Our Journal section has a collection of 85 national
journals and 71 International Journals. Library is computerized and book return, renewal transactions are done through barcode scanners.
/30/
Our Digital section has Intel Xeon 3.0 GHz storage server, 1.64 TB storage capacity and 15 nos. of Flat monitor systems with CD writer, Pen drive and internet connectivity. Electronics Journals like IEEE online, Science Direct Online, J-Gate online are subscribed for
students‟ access. Nearly 4547 nos. of CD-Rom resources are stored in the storage server and Online journals resources of 200 journals are fully stored and made access to all our users through Intranet facility. Our college maintains Online Video course programmes. Online
Video programme are received from IIT. We maintain EDUSAT live program, received through Anna University. As our college is a member of DELNET, we receive books for all engineering disciplines through Inter Library Loan. The SC/ST Book Bank collections are
available in our library to meet the demands of SC/ST students. 1. Strict silence should be maintained in the Library and the reading room.
2. Each student will be provided with library cards on the following basis I Year - 2 Cards, II Year - 3 Cards III Year - 4 Cards, IV Year - 5 Cards
3. Open-access system is followed. 4. Students should not carry any book (or) printed matters into the Library. 5. Students can have the books for two weeks (i.e. 14 days) from the date of
issue. 6. Books will be issued and returned in all working days.
7. Students should not write or draw anything on the books, periodicals and newspapers. 8. Library hour is alloted to all branch students during class hours.
9. Students will be responsible for any damage done to the books or to other library properties. 10. The Librarian is empowered to send out any student who makes a noise or
misbehaves in the Library.
9.3 PLACEMENT CELL : A separate placement cell is established in our College and a full time staff member is
working as a Placement Officer. In order to meet the challenges of reputed companies for recruitment, intensive coaching classes are arranged in Aptitude test, Interview techniques, Group discussions and Communication Skills by respective experts in the field.
Combined training with the neighbouring college students are given to our students frequently. Information, regarding the job opportunities for the freshers are made available to the students. H.R. managers of various companies are contacted for conducting campus
Interviews in our College. This effort is continuous and we hope that this will yield a good result. Students are motivated to take active part in the training sessions.
A Quality Circle is formed by making the students participate departmentwise and yearwise more effectively. They will be assisting the Placement Officer in collecting information regarding the Placement opportunities and will be made available to all the
students and hence students awareness is enhanced. An MOU is signed with M/s.Sutherland Global Services Ltd., Chennai and the Placement and training programmes are made available for our
students as well as the neighbouring College students. Joint efforts are taken by the Madurai Engineering Colleges Forum for placements in which our College is also one of the members. Various information from the reputed industries are made available to the students through
Internet services. All the efforts are taken in a positive way to fetch good opportunities for our students. Placement Accreditation by top notch companies like TCS, Infosys, etc. are under process to achieve 100 % placement.
/31/
9.4 CONDUCTING APTITUDE TESTS : Aptitude tests are conducted every Saturday for the prefinal year students to enrich
themselves in puzzle solving, reasoning and arithmetic aptitude. The questions of companies like INFOSYS, TCS, WIPRO are downloaded from the Internet. We train our students to have mass awareness regarding fundamental ideas for getting jobs in reputed organizations.
9.5 MEMORANDUM OF UNDERSTANDING :
Our College has signed a “Memorandum of Understanding” with Montan University, Leoben, Austria in the field of Polymer Technology with the sincere efforts taken by Dr.Dr.(Mont) C.T. Vijayakumar, Professor in Polymer Technology
Department. This agreement enables the technology transfer between our College and the Montan University, exchange of Faculty and higher study facilities for our students. Two of our students who had passed already in April 2002 (First batch)
have gone there for higher studies with scholarship assistance. 9.6 PERSONALITY DEVELOPMENT PROGRAMME :
Students must have multifaceted development. With this aim, many steps have
been taken to develop their personality. Special lectures by eminent experts are arranged every month to shape the
personality of the students. Students are expected to prepare a paper, based on the topics dealt in the Personality Development Classes.
9.7 STUDENTS’ COUNSELLING BY PROFESSIONAL COUNSELLER : Every week one hour is alloted for counselling. About 20 students are allotted to each
teacher. In the counselling classes, the teachers probe into the students‟ problems and grievances and they help them to overcome them. Since there are only limited number of students, the teachers have close rapport with their wards. Besides counselling, students are
given good training in presenting papers and participation in seminars. Students are allowed to present papers on their favourite topics. They are encouraged to ask questions and get answers from the student presenting the paper. They used to have group
discussion also. 9.8 COMPUTER COURSES :
AutoCAD & CCNA courses are conducted for our students.
9.9 HINDI COURSE : Since we have many employment opportunities in North India, learning a Regional
language has become a necessary aspect now a days. We teach written Hindi in first year and Spoken Hindi in final year and students are benefited by this to a greater extent.
/32/
9.10 SPORTS ACTIVITIES : Our College has all the infrastructure facilities for the development of games and
sports activities. Facilities are there for playing a number of indoor as well as outdoor games. We have Tennis Court, Basket Ball Court with flood light, Volley ball court, Ball badminton court, Badminton Court, Foot ball field, Hockey field, Cricket field and Track & field.
A Gym and an Indoor Hall is available in our College for both boys & girls to improve their health.
Intramural matches are held regularly. Students are encouraged to take part in
inter-collegiate tournaments and in the “TIES” (Inter Engineering College Sports) every year.
To strengthen the physical and mental strength of our students, physical education
hour (one hour per week) made compulsory for first year students.
Yoga Classes and Yoga Demonstration have also been arranged. Yoga experts are invited to the campus and they give training to students to do “Asanas” and “Yoga”.
9.11 COLLEGE INFORMATION FORUM :
This forum was established during 2002. The main function of the forum is to ennumerate the important events, held in the College. Once in three months, a bulletin is published.
9.12 PHOTOGRAPHIC CLUB :
To develop students‟ skill in photography, this club has been started. Students are advised to become members of this Club and spend their leisure time learning photography.
9.13 CONTINUOUS EVALUATION : It is often said that our educational system is examination oriented and students
concentrate on studies only at the time of the annual examination, i.e., at the end of the year. To avoid this, semester system was introduced.
In our College, along with the semester system, continuous evaluation is followed. Students are given weekly assignments in all subjects. As soon as a unit of a subject is covered, an internal test will be conducted on that unit. These tests are conducted every
week. Thus the internal tests make the students study their lessons unit by unit without overburdening them. The marks, got by the students on weekly assignments and weekly tests, go for the internal assessment.
An extension counter of Tamilnad Mercantile Bank Ltd., has been functioning in our College since 19.01.2001 . Students are advised to deposit their money in the Extension Counter and pay all College fees through Bank only. For the convenience of students a
ATM Counter is also functioning.
/33/
9.15 HOSTELS :
Separate hostels are run for the boys and the girls within our College Campus. Hostels have the following facilities.
* Modern Kitchen & Mess Hall * Solar Water heater
* Mineral Water for drinking * Tuck shop with all amenities * Phone booth
* Reading hall with weekly magazines and newspapers * TV hall with DVD player and Tape recorder * Gym hall
* Speakers in each wing * We provided 15 systems to the Girls Hostel and 14 systems to the Boys Hostel with WIFI facility.
* For worship of God Arulmigu Om Sri Sakthi Vinayagar temple has been constructed within the Girl‟s Hostel Campus * Parents Waiting Hall has been constructed for Girls Hostellers.
Girls Hostel capacity is around 800 and Boys Hostel capacity is around 500 and there is
a common mess is run on dividing system in each hostel separately. An academic atmosphere and one community feeling should be maintained in the
hostel. 9.16 CANTEEN :
For the refreshment of staff & students, a canteen providing good hygienic food is available in our College Campus.
9.17 COLLEGE TUCKSHOP :
For the benefit of the students and staff members, a Tuckshop is run in the College campus. Stationary goods, snacks and soft drinks are sold here. Note books, paper, etc. are also available here.
9.18 COLLEGE BUSES :
College buses ply across Madurai, Tirumangalam, Sattur, Kovilpatti, Sivakasi & Aruppukottai.
Buses will start from a fixed place on a fixed time and reach the College campus. The starting place and the time will be announced by a separate notice.
The buses will stop only at the fixed stoppings on the way and not in other places. Students are advised to come to the stoppings well in advance.
/34/
Students should maintain complete silence and discipline while travelling. If anybody misbehaves or makes a noise or whistles, he/she will be immediately dropped out of the bus. They will not be allowed again to board the bus.
First three rows of the seats are reserved for the staff members and students are advised to occupy the remaining seats.
9.19 DISCIPLINARY COMMITTEE :
A disciplinery committee has been formed to look after students‟ discipline. The Principal, the Wardens and the H.O.D‟s will be its members. They can enquire the cases
regarding students‟ discipline and take necessary action. 9.20 FINE ARTS CLUB :
Ms.G. Vijayalakshmi, Asst. Professor / English is Incharge of Fine Arts Club.
“Music and dance wash away the dust of our soul”. The fine arts club functions as a separate unit (Kalashrusti) to tap out the hidden potentials of our students. They are
encouraged to take part in various intercollegiate competitions conducted by reputed institution and prestigious club.
9.21 TECH - BEATS AND TECH - BAND : Mr.B. Karthikeyan, Associate Professor / Physics is Incharge of Tech - Beats and
Tech - Band. Tech-Beats consists of skilled personnel in instruments and vocal solo to form the
college orchestra. The group performs musical programmes on important occassions to delight the audience.
Tech-Band comprises trained musicians and masters. Ceremonies and functions are marked by their performance.
9.22 GARDENING CLUB :
Mr.S. Karthickkumar, Asst. Professor / BT is Incharge of Gardening Club. To create a sylvan and idyllic backdrop in our College campus, the gardening club was
launched in 1999. As per the proposal of planting as many as thousand saplings, a year in our campus, we are carrying it out successfully.
A luxuriant lush green lawn had been laid to add hue and charm to the beautiful landscape by the extensive help rendered by our mentor Prof.G. Shanmugam. A line of thick bushes trimmed artistically is fringing the gardens by the arduous effort of the gardening club
which provide a salubrious and conducive atmosphere for both the teach and the taught. We are taking all out efforts to make our campus eco-friendly and a haven for oxygen generation.
/35/
9.23 ROTARACT CLUB : Mr.V. Rajeshwaran, Asst. Professor / English is Incharge of Rotaract Club.
Rotaract wing in our College was installed on 16.07.99. It conducts many useful programmes for the students.
9.24 BLOOD DONORS’ CLUB :
Mr.K.Agathiyan, Asst. Professor / PT is Incharge of Blood Donors‟ Club. “Let no one die for want of blood” is the motto of this club. Blood Donation Camps are
organised in our campus by Virudhunagar Medical Association, V. Dhanasamy - Parimala Devi Medical Trust Blood Bank, Virudhunagar, Government Head Quarters Hospital, Virudhunagar and Primary Health Centre, Kallikudi. Students and Staff members who donate blood are
honoured with certificates and mementoes. 9.25 N.S.S. :
Mr.A. Rajavel, Asst. Professor / EIE is Incharge of N.S.S.
The National Service Scheme was started in our College in January 2000. Ist year students are encouraged to become members. N.S.S. conducts technical courses for rural
growth, trekking programme, 10 day special camp etc. Volunteers celebrate Teachers‟ day, NSS day etc.
9.26 N.C.C. : Mr.S. Senthil, Asst. Professor / Mech. is Incharge of N.C.C.
N.C.C. Wing of our College was started in 27.10.2003. Cadets take active participation in the regular parades, Firing. They have won many prizes in the Annual Training
camps. As a part of adventurous activity, the cadets are undertaken to Trekking and cycling Expedition every year. This year 17 cadets have passed in the B-certificate Exams & 6 cadets have passed in the „C „ Certificate Exam held by the Ministry of Defence. NCC opens the job in
the Indian Army to enable them to become a disciplined citizen. 9.27 YOUTH RED CROSS :
Mr.K. Agathiyan, Asst. Professor / PT is Incharge of Youth Red Cross.
In our College, we have Youth Red Cross wing. Youth Red Cross club was inaugurated on 14.02.2001. Youth Red Cross wing of our College has plans to conduct various social welfare activities in future. Students are advised to join the club. Free Eye camp
organised in our campus by St. Luke hospital, Virudhunagar. 9.28 LEO CLUB :
Ms.D. Vijayalakshmi, Associate Professor / M.Sc. (In charge)
To promote service activities among the youth community which will develop the individual qualities of LEADERSHIP, EXPERIENCE and OPPORTUNITY, “LEO Club of Kamaraj College of Engineering & Technology” was inaugurated on March 31st, 2003,
sponsored by Lions Club of Virudhunagar.
/36/
9.29 OTHER AMENITIES : * Automatic Power restoration generator
* Mineral Water Plant * STD facility * Xerox Centre
* Water Cooler * Courier Service facility
9.30 SCHOLARSHIPS :
College is arranging to get scholarship for eligible students for the following categories : BC
MBC / DNT SC / ST
9.31 ENDOWMENTS :
1. S.P.G.C. Nagammal Gold Medal Endowment A gold medal is given to the best all rounder in First year B.E. / B.Tech. every year.
2. V.M. Gnanasabapathy – Saraswathi Ammal Gold Medal Endowment
A gold medal is given to the best all rounder in Second Year B.E. / B.Tech. every year 3. K.C.S.K. Ravindran - R. Meena Gold Medal Endowment
A gold medal is given to the best all rounder in Third Year B.E. / B.Tech. every year 4. M. Nagarajan - N. Asha Devi in Memory of V.P.S.A. Sundara Nadar Gold Medal
Endowment A gold medal is given to the best all rounder in Fourth Year B.E. / B.Tech. every year
5. Prof.R. Surendran Gold Medal Endowment :
A gold medal is given to the first year student who secures the first rank in Technical Communication English every year.
6. Prof.R. Surendran & Sons Gold Medal Endowment : A gold medal is given to the first year M.Sc. Software Engineering student who secures
the first rank in English every year.
7. P.M.A. Narayana Nadar – Saraswathiammal Centenary 2000 Memorial Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in First year B.E. Computer Science and Engineering every year
/37/
8. M.S.G. Murugan – Jeeva Gold Medal Endowment : A gold medal is given to the student who secures the first rank in First year B.E.
Electronics & Communication Engineering every year. 9. Principal Dr.K. Rajakumar & Mrs. Packialeela Rajakumar Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in First year B.E. Electronics & Instrumentation Engineering every year.
10. V.M.A.R. Thanapalan - T. Dhanalakshmi Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in First year B.Tech. Polymer Technology every year.
11. S. Mariappa Nadar – M. Packialakshmi Ammal Memorial Gold Medal Endowment : A gold medal is given to the student who secures the first rank in First year B.Tech.
Information Technology every year.
12. V.V.S. Pandurangan – Bala Saraswathi Ammal Gold Medal Endowment : A gold medal is given to the student who secures the first rank in First year B.E. Electrical
& Electronics Engineering every year. 13. JamnagarO.T.A.V. Nagarathina Nadar– N.Manoranjeetham Gold Medal
Endowment : A gold medal is given to the student who secures the first rank in First year B.Tech.
Bio-Technology every year. 14. KCET Staff Club Gold Medal Endowment :
(1) A gold medal is given to the student who secures the first rank in First year M.Sc. Software Engineering every year.
(2) A gold medal is given to the student who secures the first rank in First year
B.E. Mechanical Engineering, every year.
15. Sv.P.S.P. Rajeshwari Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in First year B.E. Civil Engineering every year.
16. M.Duraipandian and M.Karuppiah Memorial Gold Medal Endowment : A gold medal is given to the student who secures the first rank in Second Year
Computer Science and Engineering 17. Kakinada Kodangi K. Dhasaradha Nadar - Kasthuri Ammal Gold Medal
Endowment: A gold medal is given to the student who secures the first rank in Second Year
Electronics & Communication Engineering
/38/
18. Prof.R. Surendran - S. Vasuki Gold Medal Endowment A gold medal is given to the student who secures the first rank in Second Year
Electronics & Instrumentation Engineering 19. S. Chidambaram - Thenammal Memorial Gold Medal Endowment
A gold medal is given to the student who secures the first rank in Second Year Polymer Technology
20. S.P. Thaayammal Gold Medal Endowment
A gold medal is given to the student who secures the first rank in Second Year Information Technology
21. Calcutta P. Bose - Janaki Gold Medal Endowment A gold medal is given to the student who secures the first rank in Second Year Electrical &
Electronics Engineering
22. Prof. Damayanti Rajadurai, M.A., Gold Medal Endowment : A gold medal is given to the student who secures the first rank in Second Year
Biotechnology 23. V.V. Dhanushkodi Nadar Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in Second Year Mechanical Engineering
24. Theni A.M.R. Rathinasabapathy - Sakunthala Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in Second Year M.Sc. Software Engineering
25. A.S.K.A. Mariappa Nadar - Balammal Gold Medal Endowment : A gold medal is given to the student who secures the first rank in Third year Computer
Science and Engineering 26. A. Rajalakshmi Ammal - Ayyemperumal Nadar Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in Third year Electronics & Communication Engineering
27. C.V. Dhanabalan Gold Medal Endowment
A gold medal is given to the student who secures the first rank in Third year Information Technology
/39/
28. N.G. Vishnu Rajan Gold Medal Endowment A gold medal is given to the student who secures the first rank in Third year Electrical &
Electronics Engineering 29. G. Subramanian & Brothers Chennai Gold Medal Endowment
A gold medal is given to the student who secures the first rank in Third year Biotechnology.
30. G.Nagamani Memorial Gold Medal Endowment :
A gold medal is given to the student who secures the first rank in Fourth year Computer Science and Engineering
31. Rathina Nadar Pushpammal Gold Medal Endowment: A gold medal is given to the student who secures the first rank in Fourth year Electronics
& Communication Engineering
32. Kalimark. Sri.K.P. Ganesan Memorial Gold Medal Endowment: A gold medal is given to the student who secures the first rank in Fourth year Electronics
& Instrumentation Engineering. 33. V.P.M. Amirthalingam - A. Jothi Ammal Gold Medal Endowment:
A gold medal is given to the student who secures the first rank in Fourth year Polymer Technology
34. V.P.S.A. Sundara Nadar Gold Medal Endowment:
A gold medal is given to the student who secures the first rank in Fourth Year Information Technology
35. Mr.V.M.K. Chinnapalam - Mrs.C. Nagarathinam Gold Medal Endowment: A gold medal is given to the student who secures the first rank in Fourth Year Electrical &
A gold medal is given to the student who secures the first rank in Fourth year Biotechnology
37. K.S.S. Ayyasamy - Poornammal Gold Medal Endowment:
A gold medal is given to the student who secures the first rank in Fourth year Mechanical Engineering
38. K.S.S. Ayyasamy - Poornammal Gold Medal Endowment: A gold medal is given to the student who secures the first rank in Fourth year Civil
Engineering
/40/
39. P.M.S.P. Nagasamy - Janaki Gold Medal Endowment: A gold medal is given to the student who secures the first rank in Fourth year M.Sc.
Software Engineering 40. T.R. Thomas Nadar Gold Medal Endowment:
A gold medal is given to the student who secures the first rank in Fifth year M.Sc. Software Engineering
41. Theni.M.S. Gurusamy - M.S.G. Thangammal Gold Medal Endowment :
A gold medal is given to the Best Outstanding NCC Cadet 42. A.S.K.S. Thangarajan-Sakunthala Devi Gold Medal Endowment :
A gold medal is given to the First rank in I year Computer Science & Engineering „B‟Section
43. KCET Site Engineer Mr.P. Madasamy,L.C.E., Memorial Gold Medal Endowment :
A gold medal is given to the III year Civil Engineering
I. Thiru.V.M.G.Rajahsekaren - Tmt.R. Ramani Thiruvalluvar Thina Vizha ArakkattalaiNithi
Thiruvalluvar Day is observed every year and prizes are given to students who win in different competitions.
II. UnjhaV.Dhanasamy-Parimala Devi - Kamaraj College of Engineering & Technology Endowment Fund :
Under this Fund, poor & meritorious students can get interest free loans for all the four years for paying College Tuition Fees. The loan should be repaid when the students complete their studies and get jobs.
III. Prof.S.Nagaratnam - Bavani Devi Endowment :
Under this Endowment, the income from the deposit amount is used for purchase of books to our College library every year.
Kudos to the magnanimous contribution made by the Philanthrophists of Virudhunagar to acknowledge the meritorious students of our esteemed institution.
10. RULES & REGULATIONS : In our College, besides imparting technical education, special emphasis is laid on
building character and discipline. The fact that nearly 50% of the seats is occupied by girls shows that our College has been maintaining a high standard discipline. Breaking of any rules, framed by the College authorities from time to time, will be dealt with severe action.
Those who violate the following rules are liable to be fined, suspended or dismissed from the institution depending on the nature of the offence.
/41/
* Ragging in any form is a punishable crime. It is strictly forbidden inside or outside the campus.
* Smoking is strictly prohibited in the College and Hostel Campus. * Any form of celebration - birthday parties etc. is not allowed inside the College
campus. * Formation of any clubs or association without the permission of the Principal is strictly
prohibited.
* Students should not shout, hoot or whistle during class hours and in College
functions and maintain strict discipline with in the Campus and students should occupy their alloted seat.
* Throwing paper arrows and small articles is forbidden. * Students should not damage the college property. They should not scribble any
thing on the black board, table, furniture and walls. Cost of damages to property movable or immovable will be recovered from the students.
* Being a co-educational institution, the students should maintain dignity and manners with the opposite gender. Free conversation with the opposite gender is
strictly forbidden. Cracking jokes and passing comments on the opposite gender is an offence.
* During leisure hours, girls are advised to remain in the ladies‟ waiting room and the boys in the class rooms. They should not loiter along the roads inside or around the campus or stand in verandahs and in the shade of trees.
* Waste papers and packets should only be thrown in to the dust bins.
Firing crackers, even during festival times is strictly banned.
* Inside the class rooms, strict silence should be maintained. The students should occupy only the seats allotted to them.
* Students should come to College decently dressed. Boys should not wear Tight & Short shirts, Jeans pant, pants with designs, T Shirts and shirts with write-ups and designer‟s dress. Girls should wear Churidhar only, on special occassion
girls can come to College in Saree. Short top, designer‟s dress, sleevless tops not allowed. Half sarees are not allowed inside the campus.
* Cell Phones / Mobile phones are strictly prohibited for students within the College campus.
* Students should attend the laboratories and workshops only with the prescribed uniforms and shoes.
* Students should not come late to the class. (Late comers should get admission slip from the Principal / H.O.D.)
* They should not absent themselves without prior permission.
/42/
* Students are not allowed to bring their guests to College during the working hours.
* Students should not leave the campus during working hours. If anybody wants to leave the campus, they should get “the out-pass” from the Head of the Department or the Principal.
* During College hours students should not go out of College campus to buy eatables or soft-drinks.
* Students should not come to College by two wheelers.
* Students are advised to board the outside buses in an orderly way and without making a noise.
* Students are warned not to lean on the parapet wall in the first floor facing the main entrance.
* While using the staircase, students should ascend and descend in an appropriate way.
* Students are not permitted to sit inside the class room closing the door in the absence of the staff.
* Students are welcome to put forth their suggestions & difficulties to their faculty advisors / Department Incharge / Principal / Grievance Box.
Students should wear their ID Card when they in Campus.
Hostel Rules & Regulations : 1. Keep the room and verandah neat and tidy.
2. Help to keep the environment eco-friendly. It makes everyone feel happy.
3. You should not stay in the dayscholar‟s house.
4. Switch off fan, light etc. when not in use.
5. You are welcome to put forth your suggestions and difficulties to the Warden / Deputy Warden either personally or thro‟ the suggestion note book.
6. Students should follow the study hour strictly (Study hour between 8.15 P.M. to 10.30 P.M.)
7. Ragging in any form is a punishable crime. It is strictly forbidden inside or outside the Hostel campus.
8. Smoking is strictly prohibited in the College and Hostel Campus.
9. Students should not damage the hostel property. They should not scribble
any thing on the, table, furniture and walls. Cost of damages to property movable or immovable will be recovered from the students.
/43/
10. Firing crackers, even during festival times is strictly banned in the hostel.
11. Guests other than parents are not allowed to get into the hostel.
12. Students should not go to Hostel during working hours of College without permission.
13. All Students should be present in hostel by 8.00 p.m.
14. Cell phones / mobile phones are strictly prohibited for students within hostel campus.
Special Instruction for Boys :
* On Saturdays, Return to the hostel before 10.00 p.m.
Special Instruction for Girls :
* On Sundays, Girls should follow the study hour between 8.00p.m. to 10.30p.m. * Girls should return to hostel by 6.00 p.m. after the visit to their home on weekends.
Mess :
1. Wastage of food is an unsocial deed. On any account, wastage of food should be avoided Please do not waste the food material.
2. Issue of tokens is only for identification of hostlers during lunch hour. Eventhough the students does not get the mess token from the Mess office,
the mess bill amount will be deducted from their account. 3. The hostel students must send their mess reduction form to the mess office
well in advance.
4. If the reduction days are less than five days or late submission of reduction form will not be entertained.
5. The students should give their mess reduction / leave form / in the prescribed forms only.
6. The student should intimate to the mess office, if he does not take any food from the mess on any special circumstance.
7. If the student does not avail the food at the mess for any long duration
without the prior intimation to the office, he will be fined. This is to minimise food wastage.
8. Students should vacate the Mess hall on or before prescribed time.
9. Exchange of mess token among students is strictly forbidden.
