CONTENTSEnergetic Lighting’s E1SB series LED commercial shoebox area light fixture provides a...

STREET LIGHTE1ST SERIESE2ST SERIES

AREA LIGHTE1SB SERIESE3SB SERIES

WALLPACKE2WPA SERIESE1WPB SERIES

DECORATIVE OUTDOORE1WPL SERIES

WALL MOUNT E2WPC & E1PL SERIES

UTILITY AREA LIGHTE1ALB SERIES

CANOPY LIGHTE1CPC SERIES

HIGH BAY E1HBD SERIES - LINEAR E2HBA SERIES - PRO-CLASSICAL E1HBC SERIES - UFO E1HBA SERIES - PENDANT

VOLUMETRIC PANEL ELYTD4 SERIESELYRTD SERIES - RETROFIT E2T SERIES

FLAT PANEL E1PL SERIES

C O N T E N T S

DOWNLIGHT 4” & 6” RETROFIT DOWNLIGHT KITS8” RETROFIT DOWNLIGHT KITS

FLUSHMOUNTELFM & E2FMA MULTI-FAMILY SERIESARCHITECTURAL SERIES

WRAP LIGHT LINEAR WRAP LIGHT SERIES

VAPOR TIGHTELYVT SERIES

STRIP LIGHT E2SLA & E3SLA SERIES

HEALTHCARE FIXTUREELYBL SERIES

T8 LAMPT8 LED DIRECT PLUG-IN TUBE LAMP T8 LED BALLAST BYPASS RETROFIT TUBE LAMP

CORN COB LAMPE1CC SERIESE2CC SERIES

A19 BULBECO OMNI

SPECIALTY BULBBR SERIESPAR SERIESGLOBEMR-16 BULBFILAMENT BULB

67

89

1011

12

13

14

15

16171819

202122

23

2425

2627

28

29

30

31

3233

3435

3637

3839404142

4 5

MANUFACTURINGAs a manufacturer, Energetic Lighting develops and designs products in-house, allowing us to oversee

not only the final product but also all steps during production. We strive to maintain a balance between

quality and cost, which ultimately translates to value for the customer. A product is not only the sum of its

physical components, but just as important is the intangible process of design and assembly. Our efforts

are not only put into the engineering of the final product but also the efficiency of the build process and

component tooling, because a lower final cost does not need to come from lower quality components.

Q U A L I T YIn today’s lighting market, price reduction seems to be the target of every

transaction taking place, and while price is very important it must never

overshadow quality. Energetic Lighting prioritizes quality control down to

each component and throughout the entire manufacturing process. Re-

ducing cost where needed, but never at a compromise to quality. The

longevity of a company and brand cannot be built on a foundation based

only on low cost, it is the quality of the product that fosters the growth of

trust between manufacturer and consumer. Energetic Lighting will contin-

ue to remain competitive in this market while maintaining this perception.

The Energetic Lighting mission is to be the leading provider of sustainable and innovative

lighting products. We continually bring new products to the lighting market combining experience,

R&D, and technology. This enables our Distributors to sell and facilitate Contractor and ESCO partner

installations and maximize energy savings for the end users.

Energetic is committed to bringing its customers leading edge, quality products at reasonable

prices with excellent customer service. Energetic Lighting, as a leading manufacturer and developer

of energy efficient lighting products, maintains more than two million square feet of manufacturing

capability globally. We produce lighting products for many of the largest lighting companies in

the world. Since 2001, Energetic Lighting’s corporate office and main distribution center for North

America are based in Chino, California with satellite warehouses in Georgia and Texas.

6 7

E1ST Series

Energetic Lighting’s E1ST series LED street lights offer an ideal solution to replace the many inefficient road lights in use today. LEDs are capped by precision molded optical elements to provide an evenly diffused and controlled light profile ensuring safe driving environment for the road below, with several NEMA beam patterns available. With total outputs up to 19,670 lumens while only operating at 50W to 150W significantly reduces energy usage. The outer heavy duty sand-cast aluminum housing provides efficient heat management as well as weight reduction and aerodynamic profiling. These street lights will provide worry-free reliable operation for many years.

Features

Applications

• Fully sealed assemblyNo UV or IR radiationUpdated and efficient designSuitable for wet location useMounting adapters availableAvailable dusk to dawn sensor

RoadwaysCommercial locationsOutdoor overhead

•

•••

•

•••

STREET LIGHT

E2ST Series

The Energetic E2ST Series DOT styled Roadway fixture reflects the traditional cobra head designs of legacy lighting, but delivers leading edge 135-140 LM/W performance. Offered from 40W to 150W, this series covers replace-ment of HID applications ranging from 100W MH/HPS to 400W MH/HPS. With optic options from Type II-S thru Type 5-H, any roadway configuration can easily be supported. Classic DOT features include adjustable tenon pitch positioning, bottom side control gear access, tool-less access covers, ANSI wattage plates, NEMA receptacles, SPD up to 20KV is available; and newer features such as 0-10V dimming occupancy sensing are available.

Features

Applications

• Fully sealed assemblyTool-less bottom facing accessModern and efficient designSuitable for wet location useMast Arm mounting friendlyAvailable dusk to dawn sensor0-10 dimming

RoadwaysCommercial locationsOutdoor overhead

•

•••

•

•••

ROAD LIGHT

Photocell sensor

Precision optics

Aerodynamic profile Bubble level

Tool-less bottom access panel

Photocontrol NEMAreceptacle

Precision optics

*Please visit www.energeticlighting.com for the most up-to-date information.* *Please visit www.energeticlighting.com for the most up-to-date information.*

•

8 9

E3SB Series

The E3SB series area light from Energetic is a thoughtful recreation of the classic shoebox area light fixture, combined with the best of leading LED technology. The fixture footprint gives that classic look, while the slim ta-pered, self-cleaning profile suggests exceptional performance. The tested efficacy of 140 LM/W is offered across the family wattages from 100W through 350W. This makes the E3SB series ideal for replacing legacy fixtures from 250W to 1000W MH. Options include multiple mounting configurations, NEMA PC receptacle, occupancy sensing, and Type II, III, and V optics. Other key features include: Bottom side access door, large area heat sinking above arrays, single panel optics, standard SPD of 6KV, and low EPA ratings.

Features

Applications

• Full cutoff light profileGround facing access doorModern and efficient designSuitable for wet location useMultiple optic variations availableMatte brown TGIC polyester color finish0-10 dimming

Commercial locationsParking lotsSite and street lightingGeneral area lighting

•

•••

•

•••

•

AREA LIGHT

E1SB Series

Energetic Lighting’s E1SB series LED commercial shoebox area light fixture provides a solution for parking lot and open area applications. Available in 90W, 120W, 150W, and 240W models, designed to replace traditional 250W to 1000W equivalent HID shoebox fixtures. Mounting is quick and simple with a standard round slip fitter setup. An integrated dusk-to-dawn photocell re-cepticle (”L” models below) automatically turns the fixture on/off relative to ambient light when paired to NEMA 3-pin photocontrol. Constructed with a heavy duty steel body with robust gaskets and seals to prevent moisture and insect ingress. Each fixture is rated for a minimum L70 of 50,000 hours with a dependable build quality that will operate hassle-free for many years.

Features

Applications

• Full cutoff light profileMultiple mounting optionsModern and efficient designSuitable for wet location useAdditional optic types upon requestMatte brown color finish

Commercial locationsParking lotsAuto dealership lightingGeneral area lighting

•

•••

•

•••

•

SHOEBOX

E1SB-ARME1SB-A1 Mounting adaptersE1SB-SVL

Dusk-to-Dawn NEMA sensor

Durable steel housing Aerodynamic profile

Accessories - Mounting arm options

E3SB-A1E3SB-ARM E3SB-SVL

Accessories - Mounting arm options



•

10 11

E2WPA Series

Energetic Lighting’s E2WPA series LED commercial wall pack fixtures pro-vide a quick and easy solution for warehouse and industrial applications. Available in 36W, 60W and 90W variants, designed to replace traditional 100W-250W equivalent HID wall pack fixtures. The standard design looks and feels just like traditional HID wall packs, but without any of the high watt-age heat and maintenance. An integrated dusk-to-dawn photocell sensor automatically turns the fixture on/off relative to ambient light. Constructed out of heavy duty ADC12 die-cast aluminum with robust gaskets and seals to prevent moisture and insect ingress. Each fixture is rated for a minimum L70 of 50,000 hours with a dependable design that will operate hassle-free for many years.

Features

Applications

• Borosilicate glass diffusersClassic designIntegrated dusk-to-dawn sensorSuitable for wet location useEasy and secure installationDimmable with 0-10v systems (36W and 60W)Traditional shell provides an easy1 for 1 replacement on existing fixturesTGIC polyester powder coat matte brown color finish

Commercial locationsWarehouseOverhead task lightingGeneral lighting

•

•••

•

•

•

•••

•

WALLPACK

E1WPB Series

Energetic Lighting’s E1WPB series LED commercial wall pack series provides a solution for full cut off applications where prevention of undesired uplight needs to be addressed. Available in 60W, 90W, and 125W variations, and is designed to replace up to a 400W HID traditional wattage fixture. Mounting is quick and simple when combined with typical j-box mounting. Constructed of heavy gauge steel, robust gasketing, and seals. This series is rated for L70 50,000+ hours, and many years of hassle free operation.

Features

Applications

• No UV or IR radiationClassic architectural designIntegrated dusk-to-dawn photocontrolSuitable for damp location useEasy and secure installationTGIC polyester powder coat finish

Apartment complexesCondominium unitsBarrack & livingGeneral lighting

•

•••

•

•••

•

WALLPACK

Side and bottom conduit access


Durable steel housing


12 13

E1WPL Series

Energetic Lighting’s E1WPL series LED Multi-family, apartment and ESCO wall pack fixture provide a solution for wall mount applications where narrow aisle, and egress tightness needs to be considered. Available in a nominal 13W configuration, with black and white finish variations, this series designed to replace up to traditional 75w equivalent incandescent fixtures. Mounting is quick and simple with a standard junction box. Standard version includes integral “Dusk to Dawn” photocontrol. This series is constructed out of fin-shed sheet steel back plate and ADC12 die-cast body.

Features

Applications

• No UV or IR radiationModern and efficient designIntegrated dusk-to-dawn sensorSuitable for wet location useEasy and secure installationTraditional shell provides an easy1 for 1 replacement on existing fixturesMatte brown color finish

Commercial locationsWarehouseApartment lightingGeneral lighting

•

•••

•

•

•••

•

DECORATIVE OUTDOOR

E2WPC & E1PL Series

Energetic Lighting’s E2WPC series is the creative contemporary re-design of the wall mounted security light. Ideal for use where LED commercial wall pack fixtures provide a quick and easy solution for multi-family, residential, and apartment applications. Available in 10W and 20W, designed to replace traditional 100W equivalent incan-descent wall pack fixtures. An integrated dusk-to-dawn photocell sensor automatically turns the fixture on/off relative to ambient light. The E1PL series is a modern take of the classic jelly jar. Its clean simple exterior offers a universal complement to any building exterior. Producing an average of 850 Lumens this fixture is a replacement for older 13w CFL, and up to 60W incandescent luminaires. The “Dusk to Dawn” photocontrol is ingenuously integrated into the mounting body.

Features

Applications

• No UV or IR radiationModern and efficient designIntegrated dusk-to-dawn sensorSuitable for wet location useEasy and secure installationVarious color finishes0-10 dimming

Commercial canopy locationsCovered walkwaysOverhead task lightingGeneral lighting

•

•••

•

•••

•

WALL MOUNT

Dusk-to-Dawn photocell sensor

Dusk-to-Dawnphotocell sensor

Classic illumination Dusk-to-Dawnphotocell sensor


E2WPC E1PL9.5

•

14 15

E1ALB Series

Energetic Lighting’s E1ALB LED rural street/Area Lights are the ideal solution to replace many inefficient legacy “Barn lights” in use today. The E1ALB features LEDs that are protected by a precision molded optical element. To provide an evenly diffused and controlled light distribution, a classic serrated diffuser broadcasts an even Type 5 beam pattern. Where needed the dif-fuser can be removed for enahanced volumetric distribution. A total output of up to 5500 lumens is possible selecting from either the 30W or 50W model. The outer cast aluminum housing provides efficient heat management as well as weight reduction and aerodynamic profiling. These rural street light/Area Lights will provide worry-free reliable operation for many years.

Features

Applications

• Fully sealed assembly175W-250W HID replacementModern and efficient designSuitable for wet location usePost mount adapterAvailable dusk dawn sensor

Access streets and lanesStorage areas and work yardsOutdoor overhead

•

•••

•

•••

UTILITY AREA LIGHT

E1CPC Series

Energetic Lighting’s E1CPC series LED commercial low-profile canopy fixture provides a quick and versatile solution for hallways, garages, overhangs, gas stations, and other outdoor applications. The low-profile height allows for ef-ficient packaging and unobtrusive surface installation. With input wattages of 44W and 65W, this fixture is designed to replace traditional 70W to 150W PSMH equivalent canopy fixtures. Fully sealed construction allows for wet location installation where direct contact with water is necessary. Light out-put is dimmable through standard 0-10v system control leads. Constructed of heavy duty cast aluminum with an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours.

Features

Applications

• Optional microwave occupancy sensorSmall footprint design0-10v dimmingSuitable for wet location useEasy tip in installation, and security lock bolt includedLightweight and compact profile

Commercial locationsWarehouseOverhead task lightingGeneral lightingGas stations

•

•••

•

•••

•

CANOPY LIGHT


Wide-pattern diffuser Wide-pattern diffuser


•

16 17

E1HBD Series

Energetic Lighting’s E1HBD series LED “value line up” commercial 2-4ft linear highbay fixture provides a quick and easy solution for warehouse and indus-trial applications. The linear profile allows for a one-for-one substitution to existing linear fluorescent highbay fixtures where the original chain suspen-sion hardware can transfer directly over for ease of install. Available in 100W, 120W, and 200W variants, designed to replace traditional 250W-400W T8 fluorescent equivalent highbay fixtures. Constructed out of extruded alumi-num as an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours. Standard polycarbonate diffuser provides reduced glare and even illumination.

Features

Applications

• Clean extruded aluminum lookDriver and arrays isolated for heat control1/2” knockouts at both endsSuitable for damp location useEasy and secure installation


•

•••

•••

•

HIGH BAY - LINEAR

E2HBA Series

The Energetic Classic High Bay light (E2HBA) features brilliant optics and is en-gineered for lasting value. Designed in the traditional monopoint cable hung style, and offered with acrylic diffuser or optional aluminum shade, mounting heights up to 40’ are supported. This full featured family is offered in 5 watt-ages ranging from 80W to 250W, in an industry leading 140 lumen per watt output. Battery back up, conical lenses, and occupancy sensing options are also available. These higher performances are maintained by placing com-ponents to avoid heat build up, and optimize the conduction and convec-tion engineered in. One man Installation is facilitated by the innovative splice open features of the integral hook/wiring compartment design. This series is truly value engineered for both performance and appearance suited for any retail, commercial, or industrial high bay applications.

Features

Applications

• Available conical lens coverModern and efficient design0-10v dimmingSuitable for damp location useEasy and secure installationSensor and diffuser options available

Commercial and retail locationsWarehouse Overhead gymnasium and auditorium lightingGeneral lighting

•

•••

•

•••

•

HIGH BAY - PRO CLASSICAL

Chain mounting

1/2” trade-sized knockouts

Aluminum diffuser option

Occupancy sensor


18 19

E1HBC Series

Energetic Lighting’s E1HBC series LED commercial low-profile highbay fixture provides a quick and easy solution for warehouse and industrial applica-tions. The low-profile height allows for efficient packaging, as well as ac-comodates applications where a low hanging fixture is desirable. With input wattages of 120W, 150W, and 240W, this fixture is designed to replace tradi-tional 250W to 400W HID equivalent highbay fixtures. Fully sealed construc-tion allows for wet location installation where direct contact with water is necessary. Light output is dimmable through standard 0-10v system control leads. Constructed out of heavy duty cast aluminum with an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours.

Features

Applications

• Die cast body and polycarbonate lensModern and efficient design0-10v dimmingSuitable for wet location useEasy and secure installationLightweight and compact profile


•

•••

•

•••

•

HIGH BAY - UFO

E1HBA Series

Energetic Lighting’s E1HBA series LED value engineered pendant commercial highbay fixture provides a quick and easy solution for warehouse and indus-trial applications. Available in 100W, 150W, and 200W variants, designed to replace traditional 250W-400W HID equivalent highbay fixtures. Light output is dimmable through standard 0-10v system control leads. Constructed out of heavy duty steel and thermally efficient aluminum heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours.

Features

Applications

• Pendant form factorModern and efficient design0-10v dimmingSuitable for damp location useEasy and secure installationLightweight and compact profile


•

•••

•

•••

•

HIGH BAY - PENDANT

Eyelet mountingadapter

Efficient heat management


20 21

ELYTD4 Series

Energetic Lighting’s LED recessed troffer fixture delivers a superior replace-ment option for traditional fluorescent tube recessed troffer fixtures. Standard 2x2, 1x4, and 2x4 troffer sizes available to suit any office application and layout. This troffer light can be used for general office lighting, class-room lighting, and moderate task lighting without any of the maintenance issues associated with fluorescent tubes. Installation is quick and simple when mounting into standard 15/16” T-grid suspended ceiling systems. Optional Emergency back up and Occupancy sensing models are avaiable. Con-structed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this troffer is designed for many years of reliable operation.

Features

Applications

• No UV or IR radiationRibbed diffuser for even illuminationSteel body constructionSuitable for damp location useOptional integrated occupancy sensor availableEasy and secure seismic installation0-10V dimming

Office lighting Overhead task lightingLimited space mounting locationsGeneral lighting

•

•••

••

•••

•

VOLUMETRIC LAY-IN

ELYRTD Series

Energetic Lighting’s ELYRTD3 and ELYRTD4 recess troffer retrofit kits simplify the conversion from existing fluorescent 2x2 and 2x4 fixtures into energy efficient, long life LED fixtures. The innovative Energetic design facilitates room side installation, thus avoiding the dirt, debris and heat of above plenum retrofits. Fully dimmable with standard 0-10V dimming systems, and durable ribbed optic diffuser generate glare-free illumination. The high-efficacy LED’s are rated for L70 of 50,000 hours. Rugged commercial grade steel construction, and rated for use in IC situated legacy locations, this series is the ‘go-to” conversion system contractors ask for.

Features

Applications

• Uses existing troffer fixture housingRoom-side access complete installPlenum access not requiredEasy and secure installationModern and efficient designEmergency backup lighting option availableSuitable for damp location use/Type IC

Office and commercial lighting Architectural styled lightingLimited space mounting locationsGeneral classroom lighting

•

•••

••

•••

•

VOLUMETRIC RETROFIT

Gap cover trims included

Secure swing-downhinges

E1T2-SMKE1T1-SMK E1T4-SMK

Accessories - Surface-mount kits

0-10 dimming


22 23

E2T Series

Energetic Lighting’s LED recessed troffer fixture provides for an ideal replace-ment option for traditional fluorescent tube recessed troffer fixtures. Standard 1x4, 2x2, and 2x4 troffer sizes available to suit any office application and layout. This troffer light can be used for general office lighting, providing suitable light without any of the maintenance issues associated with fluo-rescent tubes. Installation is quick and simple when mounting into standard T-grid suspended ceiling systems. Light output is dimmable with 0-10v systems. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this troffer is designed for many years of reliable operation.

Features

Applications

• No UV or IR radiationDimmable with 0-10v systemsModern and efficient designMercury-free constructionSuitable for damp location useEasy and secure installation

Architectural decorOverhead task lightingAmbient room lightingGeneral lighting

•

•••

•

•••

•

VOLUMETRIC LAY-IN

E1PL Series

Energetic Lighting’s LED flat panel light fixture provides an attractive skylight appearance applications using Light Guide Technology. Standard 1x4, 2x2, and 2x4 drop ceiling sizes available to suit any office application and layout. This panel light can be used for office, classroom, conference room, or other general lighting applications, providing light without any of the maintenance issues associated with fluorescent tubes. Installation is quick and simple when mounting into standard drop-in T-grid suspended ceiling systems. Emergency Back Up options are available. Anchor hooks at each corner are also pro-vided for suspended cable mounting as well. Constructed with aluminum framed body and LED lifetime rating of at least 50,000 hours.

Features

Applications

• No UV or IR radiationModern and efficient designMercury-free constructionSuitable for damp location useStandard T-Grid drop ceiling installationDimmable with 0-10v systems


•

•••

•••

•

FLAT PANEL






0-10 dimming 0-10 dimming

•

Order #: 60005 60006 60009 60010 60007 60008Model: E2T2A36-840 E2T2A36-850 E2T1A36-840 E2T1A36-850 E2T4A40-840 E2T4A40-850

Configuration: 2x2 2x2 1x4 1x4 2x4 2x4Lumen Output: 4485 lm 4530 lm 4543 lm 4697 lm 5111 lm 5141 lmLum. Efficacy: 124 lm/W 126 lm/W 126 lm/W 130 lm/W 131 lm/W 132 lm/WBeam Pattern: 110° 110° 110° 110° 110° 110°

Input Power: 36 W 36 W 36 W 36 W 39 W 39 WInput Voltage: 120-277 Vac 120-277 Vac 120-277 Vac 120-277 Vac 120-277 Vac 120-277 VacPower Factor: 0.91 0.91 0.91 0.91 0.92 0.92

THD: 10 % 10 % 9 % 9 % 9 % 9 %CCT: 4000 K 5000 K 4000 K 5000 K 4000 K 5000 KCRI: 85 86 84 86 85 86

Lifetime: 50000 hours 50000 hours 50000 hours 50000 hours 50000 hours 50000 hoursWarranty: 5 Years 5 Years 5 Years 5 Years 5 Years 5 Years

Dimmability: (0-10v) (0-10v) (0-10v) (0-10v) (0-10v) (0-10v)Op. Temp: -9°F to 104°F -9°F to 104°F -9°F to 104°F -9°F to 104°F -9°F to 104°F -9°F to 104°F

Environment: Damp Rated Damp Rated Damp Rated Damp Rated Damp Rated Damp RatedWeight: 9 lbs 9 lbs 10 lbs 10 lbs 15 lbs 15 lbs

Certifications: DLC Standard DLC Standard DLC Standard DLC Standard DLC Standard DLC StandardDimensions: 23.8"x23.8"x3.9" 23.8"x23.8"x3.9" 47.8"x11.8"x3.9" 47.8"x11.8"x3.9" 47.8"x23.8"x3.9" 47.8"x23.8"x3.9"

24 25

4” & 6” Retrofit Downlight Kits

Energetic Lighting’s E2DL09D4, E2DL11D6, E2DLB, and E2DL18D6 series of LED downlight retrofit kits provides an elegant solution for converting exist-ing recessed cans into LED fixtures. Available in 4-inch and 6-inch can sizes operating at 8.5-watt, 10.5-watt, and 18-watt versions, with a beam angle of 90°, and dimmable down to 10%. An improved “slip-in” friction fit mounting clip for the 6-inch model prevents the clips from being damaged during re-moval from the downlight housing. Comprising of a durable die-cast alumi-num construction and a LED lifetime rating of 36,000 (18W models) or 50,000 hours, this robust downlight is designed for many years of reliable operation.

Features

Applications

• “Easy Fit” clipsElegant and efficient designMercury-free constructionSuitable for use in Type-IC and Non-IC recessed can fixturesSuitable for damp location useDie cast bodyDimmable

Architectural decorOverhead accent lightingSpot area lightingGeneral lighting

•

•••

••

•••

•

DOWNLIGHT

8” Retrofit Downlight Kits

Energetic Lighting’s E1DL22D8 series of LED downlight retrofit kits provides a simple and elegant solution for converting existing 8 inch recessed cans into LED fixtures. Energy efficient at 22 watts while producing up to 1800 lumens with a beam angle of 100°. Two spring mounting clips provide a secure and simple installation into any existing 8-inch downlight. Rated for 120-277V universal voltage and suitable for 0-10v dimming systems, this downlight kit is versatile enough for any installation location. Comprising of a durable die-cast aluminum construction and a LED lifetime rating of at least 50,000 hours, this robust downlight is designed for many years of reliable operation.

Features

Applications

• Commercial voltagesElegant and efficient design0-10V dimming at all voltagesTrade size 1/2” flexible metalconduit input leadSuitable for damp location useEasy and secure installation

Architectural decorOverhead accent lightingSpot area lightingGeneral lighting

•

••

••

•••

•

DOWNLIGHT

*Please visit www.energeticlighting.com for the most up-to-date information.*

0-10 dimmingSeamless integration

E26 adapter withstandard disconnect

1/2” trade-sized flexible metal conduit lead

6” E2DL


4” E2DL

E2DLB

•

26 27

ELFM & E2FMA Multi-Family Series

Energetic Lighting’s ELFM and E2FMA series of LED round flushmount fixtures are designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Fix-tures are available in multiple diameter options, 9”, 13”, 15”,and 19”, making the choice easy for any type of application. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation.

Features

Applications

• Tool-less diffuser attachmentMinimalistic and efficient designMercury-free constructionSuitable for damp location useEasy and secure installationTriac dimmable to 10% output

Multi-family and apartmentsOverhead & hallway lightingAmbient room lightingGeneral lighting

•

•••

•

•••

•

FLUSHMOUNT

Architectural Series

Energetic Lighting’s ELFM-13RGS-BN, E2FMB16-830 LED, E2FMC15-840 flush-mount fixtures are designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation.

Features

Applications

• Durable white polymer diffuserBrushed stainless steel accent designMercury-free constructionSuitable for damp location useEasy and secure installationTriac dimmable


•

•••

•

•••

•

FLUSHMOUNT

E2FMB16-840

ELFM-13RGS-BNCompact integrated

driver

Smooth diffusionlight profile

Classic style

E2FMC15-840


28 29

Linear Wrap Light Series

Energetic Lighting’s E2WR and ELYWL series LED surface mount wraps show-case a soft fixture form factor in their 2-ft or 4-ft lengths. These versatile lights can be used for general room lighting, or as a functional work area lights with an all white or silver accent appearance. Installation is quick and simple when mounting into standard ceiling junction boxes. Constructed with a du-rable steel housing body and LED lifetime rating of at least 50,000 hours, these rugged wrap lights are designed for many years of reliable operation.

Features

Applications

• Different appearance optionsModern and efficient designReduced glare translucent diffusersSuitable for damp location use0-10V dimming on E2WR model


•

•••

•••

•

WRAP LIGHT

ELYVT Series

Energetic Lighting’s LED Vapor Tight fixture radiused profile with a nominal lumen output of 5100 lumens, while drawing only 40 watts of power. The fully sealed housing can be installed in high humidity areas and locations that re-ceive direct water exposure. Both fixture body and diffuser are constructed of durable polymers for impact resistance. This versatile light can be used for general functional lighting, where its rugged construction and long LED life-time will provide years of maintenance free service. Installation is quick and simple with standard trade size conduit openings at both ends, and quick mounting adapters.

Features

Applications

• Complete gasketingModern and efficient designRibbed translucent diffuserSuitable for wet location useEasy and secure installation

Impact resistant applicationsWet environmentsParking and garage lightingGeneral lighting

•

•••

•••

•

VAPOR TIGHT

3/8” Liquid-tightconduit entry

Wide-pattern diffuser Tool-less access latches

Second conduitopening


ELYWL2

E2WR40D-840

30 31

E2SLA & E3SLA Series

Energetic Lighting’s LED Strip Light family of fixtures are desined to emulate the look of traditional fluorescent T8 tube lights. This series offers variations from 10W up to 40W outputs, and single and double strip appearances. 0-10V dimming and 120-277VAC operation are featured. Designed for series installation, the easy end connection design facilitates any install. Combin-ing a durable steel housing, rugged polymer diffuser, and an L70 lifetime of 50,000 hours will provide many years of dependable and worry free use.

Features

Applications

• Selectable Bi-directional up/down lightsNightlight indicator light adjacent to pull switch No UV or IR radiationMinimalistic and efficient designMercury-free constructionSuitable for damp location useEasy and secure installation

Patient bed overhead lightingOverhead task lightingBi-directional area lightingGeneral lighting

•

•••

••

•••

•

STRIP LIGHT

ELYBL Series

Energetic Lighting’s LED Bed Light emulates the traditional bi-directional fluo-rescent fixtures used throughout hospitals and the general medical/nursing industry. Two diffuser panels direct light down, up, or in both directions; 44W (4,500 lumens) downlight, 22W (2,250 lumens) uplight, or 66W (6,750 lumens) altogether. A convenient switchable indicator nightlight is provided next to the pull chain switches, which can be extended to customize the chain length and reach. A 50,000 lifehour rating backed with a 5 year warranty will ensure that this fixture will continue to run for many years of dependable service.

HEALTHCARE BED FIXTUREFeatures

Applications

• 0-10v dimmableNo UV or IR radiationMinimalistic and efficient designMercury-free constructionSuitable for damp location useTool-less wire compartment entryLinkable ends with included adapter

Architectural decorOverhead task lightingLimited space mounting locationsGeneral lighting

•

•••

••

•••

•

Tool-less entry

0-10 dimming

Independently controlled

up/down light

Pull switches withadjacent indicator light


32 33

T8 LED Direct Plug-In Tube Lamp

Energetic Lighting’s E3T8CG series of LED Direct Plug-in T8 tubes are designed to emulate the look and feel of traditional 4-foot 32 watt fluorescent T8 tubes, while maintaining the ease of a plug-in installation. A durable coated glass diffuser make this tube virutally indistinguishable from traditional fluo-rescent tubes. No fixture retrofit wiring is needed since these bulbs will run off the existing fluorescent ballast. Compatible with most electronic ballasts, including pulse start, rapid start, and instant start configurations. Rated with an L70 lifetime of at least 50,000 hours, this rugged tube lamp is designed for many years of reliable maintenance-free operation.

Features

Applications

• Dual ended circuit design for non-shunted socketsWorks just like a traditional fluorescent T8 tube Mercury-free constructionSuitable for damp location useSuitable for totally enclosed fixturesEasy and secure installationDurable coated glass tube lens


•

••

••

•••

•

T8 LAMP

T8 LED Ballast Bypass Retrofit Tube Lamp

Energetic Lighting’s E3T8G(2) series of LED ballast bypass T8 tubes are designed to emulate the look and feel of traditional 2-foot and 4-foot fluorescent T8 tubes. The lens is made of a durable glass or polycarbonate materials, both engineered for maximum light diffusion as well as reliability. Simply bypass the ballast in the existing fixture is all it takes to convert existing fluorescent fixtures into long life, energy efficient LED units. Rated with an L70 lifetime of at least 50,000 hours, these rugged tube lamps are designed for many years of maintenance-free operation.

Features

Applications

• Single live end shunted socket designSimple and efficient designMercury-free constructionUniform illumination light profileSuitable for totally enclosed installationSimple ballast bypassing steps on existing fixturesDurable glass or polycarbonate diffuser lens

Office lightingOverhead task lightingLimited space mounting locationsDamp location Installation

•

•••

•

•

•••

•

T8 LAMP


E3T8CG

E3T8E3T8GE4T8

ELYT8G2

E3T8C

•

34 35

E1CC Series

Energetic Lighting’s E1CC series Corn Cob lamps provide an easy solution for upgrading existing HID fixtures to energy-saving LED fixtures. Available in E26 (wattage dependant)or E39 base type to accomodate almost any type of fixture with a mogul lamp base. These by-pass lamps run independent from any ballasts and are rated for an L70 lifetime of 50,000 hours, providing a reli-able light source to any existing fixture, no matter the age. Suitable for fully enclosed fixture types, where applications include wall packs, shoeboxes, flood lights, low bays, and just about any reflector-type fixture.

Features

Installation Requirements

Applications

•

•

No UV or IR radiationSimple and efficient designMercury-free constructionFull 360° illumination

Fixture ballast must be bypassedInput supply voltage range: 120-277VacE39 screwshell base @≥36WHorizontal or vertical lamp orientation (full 360° illuminance)

Warehouse and commercial lightingIndustrial lightingSuitable for fully enclosed installationWall Pack, Flood Light, Highbay, and Shoebox fixtures

•

•

•

•

•

•

•••

•

CORN COB LAMP

E2CC Series

Energetic Lighting’s E2CC series Corn Cob lamps provide an easy solution for upgrading existing HID fixtures to energy-saving LED fixtures. Available in E26 (wattage dependent) or E39 base type to accomodate almost any type of fixture with a mogul lamp base. These by-pass lamps run independent from any ballasts and are rated for an L70 lifetime of 50,000 hours, providing a reli-able light source to any existing fixture, no matter the age. Suitable for fully enclosed fixture types, where applications include wall packs, shoeboxes, flood lights, low bays, and just about any reflector-type fixture.

Features

Applications

• Horizontal or vertical orientationSimple and efficient designMercury-free constructionFull 360° illumination


•

••

•••

•

CORN COB LAMP

360 degree omni directional output

360 degree omni directional output


Installation Requirements• Fixture ballast must be bypassed

Input supply voltage range: 120-277VacE39 screwshell base @≥36WHorizontal or vertical lamp orientation (full 360° illuminance)

•

••

36 37

OMNI

Energetic Lighting’s A19 and A21 Omni LED bulbs provide a one for one replacement for all incandescent Omnidirectional lamp needs. An energy efficient integrated LED driver operating at less than 1/6th of its equivalent incandescent lamp wattage. This lamp is suitable for damp location installa-tions, dimmable, and supplies a reliable light source for at least 15,000 hours while backed by a 5 year warranty.

Features

Applications

• No UV or IR radiationDimmable to 10%Elegant and efficient designMercury-free constructionUniform illumination light profile

General LightingDamp location InstallationDesk lamps360° fixture styles

•

•••

•••

•

A19 BULB

ECO

Energetic Lighting’s A19 and A21 Omni LED bulbs provide a one for one replacement for all incandescent Omnidirectional lamp needs. An energy efficient integrated LED driver operating at less than 1/6th of its equivalent incandescent lamp wattage. This lamp is suitable for damp location installa-tions, on/off uses, and supplies a reliable light source for at least 10,000 hours while backed by a 2 year warranty.

Features

Applications

• No UV or IR radiationNon-dimmableElegant and efficient designMercury-free constructionUniform illumination light profileDimmable

General lightingDamp location installationDesk lamps360° fixture styles

•

•••

•••

•

A19 BULB

Beam angle 220º~240º

220º~240º

Beam angle 230º-310º


•

38 39

PAR 20, PAR 30 & PAR 38 Series

Energetic Lighting’s PAR profile LED bulbs provide a superior replacement for all incandescent PAR lamp aplications. An energy efficient integrated LED driver operating at about 1/6th the equivalent wattage while delivering the same lumen output. PAR30 bulbs are available in both short and long neck variants. The Par38 bulb is suitable for wet location installations where appli-cations such as outdoor security lights are required. Dimmable down to 10%, and supplying a reliable light source for at least 25,000 hours backed by a 5 year warranty, these bulbs will be dependable for many years of service.

Features

Applications

• No UV or IR radiationElegant and efficient designMercury-free construction40° beam spread light profileDimmable to 10%

General and ambient lightingDamp location installation(Wet location for Par38)

•

•••

••

PAR BULB

BR Series

Energetic Lighting offers a complete line of LED R and BR style bulbs with for-mats for R20, BR30, and BR40 profiles, providing an environmentally friendly alternative to traditional incandescent bulbs. These energy efficient LED bulbs operate at less than 1/6th the wattage of its incandescent equivalent, while delivering the same light output. These bulbs are suitable for damp location installation and fully dimmable down to 10%. This bulb will provide a reliable light source for at least 25,000 hours while being backed by a 5 year warranty.

Features

Applications

• No UV or IR radiationElegant and efficient designMercury-free construction120° beam spread light profile

General lightingDamp location installationAmbient lighting

•

••

•••

BR BULB

Classic shape Traditional lamp profile

Precise beam angleprofile


40 41

G25 & G16.5

Energetic Lighting’s G16.5/G25 Globe LED bulbs provide a superior replace-ment for all incandescent equivalent lamp aplications. An energy efficient integrated LED driver operating at only 4.5 watts/8 watts delivers the same lumen output as an equivalent 40 watt/60 watt incandescent lamp. These lamps are suitable for damp and totally enclosed installation locations, dim-mable to 10%, and supplies a reliable light source for at least 25,000 hours backed by a 5 year warranty.

Features

Applications

• No UV or IR radiationElegant and efficient designMercury-free constructionUniform illumination light profileDimmable to 10%

Decorative and general lightingSuitable for damp location installationSuitable for totally enclosed recessed luminaires

•

••

•••

GLOBE

GU10 & GU5.3 MR16

The main problem with traditional halogen MR-16 bulbs is the amount of heat produced in such a small compact space. Energetic Lighting’s LED MR-16 bulbs solve this issue by operating at 1/5th of the equivalent wattage while supplying the same amount of light needed for these applications. The light output can be dimmed down to 10% and will provide a reliable light source for at least 25,000 hours while backed by a 5 year warranty.

Features

Applications

• No UV or IR radiationElegant and efficient designMercury-free constructionUniform illumination light profileDimmable to 10%


•

••

•••

•

MR-16 BULBGU10 GU5.3

Beam angle 35°

Efficient heatmanagement


•

4342

E1F Series

For the truly classic bulb look, you can’t go wrong with our LED filament bulbs! On or off, these bulbs give the guise of classic traditional incandescent bulbs. Upgrade to LED bulbs without affecting your classic atmosphere and room ambiance. These filament bulbs not only look great but won’t miss a beat with performance; they have no problem delivering the light output needed to give off sufficient ambient lighting or dim it down to create the mood de-sired. Available with clear transparent glass or in a vintage tinted glass.

Features

Applications

• No UV or IR radiationElegant and efficient designMercury-free constructionUniform illumination light profileDimmable down to 10%


•

•••

•••

FILAMENT BULB

LIMITED WARRANTY

Energetic Lighting warrants the products that it manufactures to be free from defects in mate-rial and workmanship, and agrees to repair or replace the defective product, from the date of purchase at its sole discretion. Please see specification sheets or product packaging for appli-cable warranty periods as products vary.

Energetic Lighting will not cover failure due to the following:• Improper installation or operation.• Improper maintenance.• Accidental damage, misuse or abuse of the product• External causes or natural disasters.• Normal wear and tear.• Repairs or alterations to the product.• Any use of the product in any way different than which the product was de-signed for.

ENERGETIC LIGHTING WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS RESULTING FORM THE USE OR INABILITY TO USE THE PROUCTS OR FROM THE PRODUCTS BEING INCORPORATED IN OR BECOMING A COMPONENT OF ANY OTHER PRODUCT OR GOOD.

REPLACEMENT POLICY

• A replacement or credit claim must be within the warranty period. Claims will not be ac-cepted without prior authorization. Distributor must call, fax or email Energetic Lighting for a Return Merchandise Authorization form which will be emailed to claimant. • Energetic Lighting will arrange pick-up of defective products after RMA is approved.• Return Merchandise Authorization is only good from 30 days from issue. A copy of the RMA must accompany product sent to Energetic Lighting.• Energetic Lighting will not be responsible for any returned goods lost or damaged by carrier. • Replacement or credit will be issued upon receipt of defective products. All returned prod-ucts will be inspected tested by Energetic Lighting. Replacement or credit will only be issued to items confirmed to be defective. Energetic Lighting will pay for the shipping on approved replacements.• If replacement need is mutually agreed to be urgent, Energetic Lighting will accept a new Purchase Order (PO) in which distributor is responsible for shipping charges. Upon receipt of defectives, a credit for products purchased will be issued. Energetic Lighting reserves the right to test the product and/or inspect the installation site and reduce the claim if it’s deter-mined to not be defective or at fault. •Returns for non-defective products must be requested within 30 days of invoice. Returns will be assessed a 25% restocking fee and will be processed as a credit. Customer must pay freight for the return of non-defective products. Non-defective products must be returned in its origi-nal packaging. Products received broken or whose packaging is damaged will not be valid for a credit. •No cash refunds for returned products. Credits apply only to future or existing orders.•Energetic Lighting will not recognize a distributor debit memo until an Energetic Lighting cred-it memo has been issued. •All returns are to be shipped to Energetic Lighting with an accompanying RMA copy.


44

back cover

ENERGETIC LIGHTING

13445 12th ST., Chino, CA 91710TEL: 1-866-492-6566 909-591-2345FAX: 909-591-2448

Email: [email protected]

Energetic Lighting is a UL, Energy Star, and DLC listed company

Date post:	24-Aug-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

CONTENTSEnergetic Lighting’s E1SB series LED commercial shoebox area light fixture provides a...

Documents