Weekly Information Service about Pipes and Fittings Publisher: HIX Publishing, Schwelm /Germany, Dipl.-Ing. Jutta Hix, [email protected]
KWD-globalpipe – Statutory Information:
HIX Publishing, Dipl.-Ing. Jutta Hix, 58332 Schwelm /Germany, Tel. +49 (0)2336 / 40 66 42, Fax +49 (0)2336 / 40 66 41. Subscription rates: 40 issues per year EUR 250,00 (Germany: + VAT). Subscription will be renewed automatically for a further year unless cancelled in writing 8 weeks before expiry date. Copyright KWD-globalpipe. All rights reserved. Editor in Chief: Dipl.-Ing. Jutta Hix, Assistant Editors: Ralf Hamich, Michaela Hamich-Helbrecht, Achim Seydel.
Contents of KWD-globalpipe, 590, February 22, 2016
Fitting News
1. FRABO/ITA plans to expand on foreign markets – New DVGW Certification .................................................................. 1 2. Giacomini/ITA: Expansion System GX includes PE-Xb pipe with increased thickness.................................................... 2 3. ITAP/ITA launched in multi-fit
® Fitting Family Nut and Adapter now for PEX Pipe .......................................................... 3
Trade fair Exhibitor News
4. Roth will shine the Spotlight on its Floor Heating and Cooling Systems at SHK Essen ................................................... 3 5. ITAP presented NF Standard approved Europress Pressure Reducing Valve at BIG 5 .................................................. 4 6. Conex Bänninger successfully returned to AHR Expo in the USA for second Time ........................................................ 5
Company News
7. Brugg Group acquired a 100% Shareholding in PIPE2000 Ltd ....................................................................................... 5 8. Uponor’s improved Performance supported by North America in 2015 ........................................................................... 6 9. AENOR/ESP: New Certifications between January 2014 and December 2015 .............................................................. 7
FRABO/ITA plans to expand on foreign markets – New DVGW Certification
Press fittings / Certification
FRABO closes 2015 in a positive way and the new year opens with a commitment to innovation and internationalization. For 2016 the company plans to expand on foreign markets and major structural investments.
KWD-globalpipe, 22.02.2016. FRABO, a Brescia company founded in 1969 by Bonetti brothers and now among the main Italian companies in the production of fittings for plumbing and heating systems, closed
2015 with a turnover increase and is about to consolidate its presence on the German market thanks to the new certification issued by DVGW.
The certifying body, which in Germany has the responsibility for developing the technical regula-tions for water and gas distribution, for promoting research and education, for carrying out examina-tions and tests and for issuing certifications, issued a new certification to FRA.BO regarding the product FRABOPRESS SECURFRABO – the press-fitting system for copper and bronze for thermo hydraulic installations used both for water and gas applications.
This second certification, in addition to the one already issued to FRABO in May 2015 after a long legal battle, certifies that the full range of FRABOPRESS SECURFRABO products is compliant with all regulations. In particular, DVGW verified that SECURFRABO seal – suitable both for water and gas distribution – has the right features for both applications.
FRABOPRESS SECURFRABO is a set of copper and bronze press fittings for thermo hydraulic installations with copper pipes, suitable for gas and water installations equally. The system has been tested and inspected for all gas, water and heating applications and is suitable for a wide range of uses in the construction and industrial engineering indus-tries. Compared with the previous one, the new line-up is equipped with SECURFRABO seal, the patented safety system by FRA.BO that allows you to instantly locate the failure pressing points. The new product range will be launched in Germany next spring, in all modes and sizes from 12 to 54.
Frabopress Securfrabo (Foto: Frabo)
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 2
DVGW declared that FRABOPRESS SECURFRABO passed all the tests with complete satisfac-tion of the testing institute. The certification has been obtained after compliance tests, according to general regulatory requirements and to DVGW CERT GmbH regulations. With this certification, re-quirements related to security, hygiene and environmental protection have been fulfilled.
When we asked FRABO in 2015 in which countries they are selling their products, the answered: "FRABO is constantly investing abroad, also overseas, however, without neglecting the important Italian market. The export business makes up 60 % of the turnover, and the trend is upward. The company goes on investing in order to consolidate all existing markets and to open new ones for FRABO. The products are sold in more than 30 countries. In Western and Northern Europe, besides Italy, these are: France, Spain, Portugal, Sweden, Denmark, Finland, Belgium, Luxemburg, the Baltic States and Greece. The main markets in Eastern Europe are: Slovenia, Slovakia, the Czech Repub-lic, Poland, Croatia, Serbia, Macedonia, Bosnia, Albania, Hungary and Bulgaria. The overseas mar-kets are the USA and India. FRABO plans to open up new markets, too."
But FRABO set further objectives. In 2016 they want to begin, then, with the real prospect of ex-panding its presence in a strategic market like Germany. The company aims also to support the production – that includes 25 product categories and 5.000 items made of 6 different materials – and to increase investments for the renovation of the structure. In 2016 FRA.BO will invest more than 10% of its turnover in the new productive site, whose renovation started in 2015, an activity that includes also the requalification of the old building, the building of a new warehouse and the pur-chase of new machinery.
Contact: FRABO S.p.A., Italy, www.frabo.com PR: [email protected]
Giacomini/ITA: Expansion System GX includes PE-Xb pipe with increased thickness
Shrink back fitting system with PE-Xb pipe
Giacomini showcased the GX System (Giacomini eXpansion System) with PE-Xb pipes with increased thickness at last year’s ISH in Frankfurt, Germany. This fitting system works through compression by memory effect after expansion.
KWD-globalpipe, 22.02.2016. The GX System of the Italian company Giacomini is similar to Uponor’s
Quick & Easy (Q&E)® and ProPEX® systems with PE-Xa pipe – some of their related patents expired in 2014 – and the AC-FIX PLASTIC RING "Shrink-Fit” System of the Spanish company Global Piping Systems. For more information please see our articles published in KWD-globalpipe issue no. 549, 18.02.2015, “Global Piping/ES launch AC-FIX Shrink-Fit System similar to Uponor’s Q&E+ProPEX” and issue no. 555, 16.04.2015, “Uponor Quick & Easy Connection Technology – The Success Story continues”.
GX system (Giacomini eXpansion System): Distribution system in diameters from 16 to 40mm for sanitary water and heating/cooling systems, both traditional and radiant, consist-ing in PEX-b pipes and brass fittings with a seal guaranteed by a polymeric ring; piping in high-thickness PE-Xb (PN10), red colour: 16x2,2 (100m), 20x2,8 (100m), 25x3,5 (50m), 32x4,4 (50m) and 40x5,5 (4m bars). The sys-tem's water-tightness and reliability over its entire lifetime are guaranteed by the shape memory of its plastic components and the fittings' specific design.
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 3
Technical features - GX connection: In order to create system connections, the GX system relies on the memory of the plastic materials of its components, maximising their performance thanks to the special profile of the fitting. The gradual expansion of the pipe coupled with the ring enables installers to insert the fitting, which is very quickly clamped into position by the force generated while the poly-mer components shrink back to their original shape. At the end of the procedure, the joint has better mechanical characteristics compared to those of individual pipe.
Contact: Giacomini S.p.A., Italy, www.giacomini.com [email protected]
ITAP/ITA launched in multi-fit® Fitting Family Nut and Adapter now for PEX Pipe
Compression and push fit fittings
ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing and heating systems.
KWD-globalpipe, 22.02.2016. Thanks to fully automated production process-es, with 72 tooling machines and 51 assembly lines, they are able to produce 180,000 pieces per day. ITAP’s production process is entirely carried out in three buildings in Italy.
The range of fittings includes:
multi-fit®, the simple, fast and money saving system with compression fittings for multi layer, PEX and PB pipe
itap-fit® push fit fittings for copper, PEX and PB pipe
Compression fittings for copper pipe according to UNI EN 1254-2 Standard; with black olive for water systems and food use and with yellow olive for gas and fluid hydrocarbons systems
vx and vx-n fittings suitable for the use with HD and LDPE pipes
New in 2015 ITAP launched in the range of the fitting family multi-fit® to the existing nut and adapter for multi layer pipe nut and adapter now for PEX pipe, available in sizes with ¾’’ nut EUROKONUS 16x1,5, 17x2 and 20x1,9.
Contact: ITAP SpA, Italy, www.itap.it [email protected]
Roth will shine the Spotlight on its Floor Heating and Cooling Systems at SHK Essen
Trade fair participation / Floor heating and cooling systems
During the trade fair SHK Essen, Germany, in Hall 1.0 Stand 1A13, manufacturer Roth will show innovative system solutions in the field of building technology.
KWD-globalpipe, 22.02.2016. In the product sector floor heating and cooling systems, Roth provides wall, floor and ceiling solutions for new builds and reno-vation projects using both wet and dry construction methods.
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 4
Roth is a multinational manufacturer of energy and sanitary systems with offices around the world. The Company offers established brand products to the market through a three-tier sales channel.
Based on the motto “Living full of energy", Roth combines product systems from energy genera-tion, as well as energy storage and application to complete systems as a single-source provider.
As the inventor of the Original Tacker System, Roth will share the results of scientific studies conducted to investigate the use of the Roth Original Tacker clip and its pipe-raising function to fit system pipes onto insulation. The studies provide evidence of improved energy efficiency due to the design of the clip and its resulting functionality.
Contact: Roth Werke GmbH, Germany, www.roth-werke.de
ITAP presented NF Standard approved Europress Pressure Reducing Valve at BIG 5
Trade fair participation / Valves
During the BIG 5, the most important exhibition of Gulf Area for building products arranged at "Dubai World Trade Center" in November 2015, ITAP showcased its product range with focus on the EUROPRESS pressure reducing valve and SIX-WAY VALVE.
KWD-globalpipe, 22.02.2016. EUROPRESS® pressure re-ducing valve PN25, fe-male/female connection, recent-ly has been approved under the requirements of NF standard in France (one of the most restric-tive European standards) on the basis of very severe and tough mechanical and sanitary re-quirements.
ITAP is proud to be the first company to obtain such a certification with a piston pressure reducing valve, in order to show how strongly the com-pany believes in its “Research & Development” dept.
The company is extremely confident of being able to achieve significant sale success through French market, thanks to a product that combines
Roth Original Tacker 2.0: light-er, more convenient, more ergonomic: Roth has developed the Tacker further and presents the Roth Original Tacker 2.0., suitable for Roth Original Tacker 16 to 20mm Ex Clips. It can be used to fit Roth System Pipes with pipe holders on insulating panels in radiant heating and cooling installations. The Tacker weighs only 2kg.
Roth Flipfix Tacker system for new appli-cations – just unfold it and you're done: The Flipfix Tacker system for radiant heating and cooling systems is suitable for applica-tions where insulation made of conventional EPS and PU materials, as well as mineral insulation materials, is installed on site. The 2mm thick Roth Flipfix panel is available in 5m strips. It is folded down to 1m
2 in a practi-
cal zig-zag pattern, giving compact packag-ing unit dimensions that are advantageous for transport and storage.
Roth Dry Construction System certified to DIN CERTCO for sports floors – Now also available in the dimension 16mm: Roth has been awarded DIN CERTCO certifi-cation for sandwich-construction sports floors for its Roth Clima-Comfort Dry Construction System. These certificates are available for the systems with alu heat-conducting lamellas and Roth System Heating Pipes in the dimensions 14+16mm.
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 5
high levels of performance and a very competitive price level.
EUROPRESS® pressure reducing valve works up to a maximum upstream pressure of 25 bar and it is possible to adjust the downstream pressure between 1 and 5,5 bar. The maximum working temperature is 80°C. The new 6-way motorized ball valve has attracted the attention of many visitors at the BIG 5 in Dubai, since it is able to replace up to four 2-way motorized ball valves. It is easy to imagine the saving in term of time and money in case of use of such valve, if compared to traditional installation of 2-way valves.
Contact: ITAP SpA, Italy, www.itap.it
Conex Bänninger successfully returned to AHR Expo in the USA for second Time
Trade fair participation / Press and push fit fittings
Attending the AHR Expo at the Orange County Convention Centre in Orlando, Conex Bänninger successfully exhibited in the USA for the second time.
KWD-globalpipe, 22.02.2016. An IBP Group company, and a leading manufacturer in the supply of plumbing & heating fittings and valves, Conex Bänninger showcased experience and inno-vation to over 60,000 attendees.
A range of fitting technologies were exhibited at the Expo, including products such as flame free solutions, fittings suitable for high pressure fittings and our innovative transitional oyster connector range. Products on display included >B< Press, Cuprofit, K65 and valves.
For a second year running, the Expo was a complete success, enabling the business to continue building a platform in America. Following the success of the last two Expo’s, Conex Bänninger will return again to present its portfolio in Las Vegas, 2017.
Contacts: Conex Universal Limited, IBP Group, United Kingdom, www.ibpgroup.com [email protected]
Brugg Group acquired a 100% Shareholding in PIPE2000 Ltd
Acquisition
Swiss manufacturing group Kabelwerke Brugg AG Holding has acquired a 100% shareholding in PIPE2000 Ltd - one of the longest serving customers of BRUGG Pipesystems.
KWD-globalpipe, 22.02.2016. Swiss manufacturing group Kabelwerke Brugg AG Holding has acquired a 100% sharehold-
ing in PIPE2000 Ltd - one of the longest serving customers of Brugg Pipesystems.
Brugg’s manufacturing history dates back to 1896. The group consists of 5 divisions (pipe systems, cable sys-tems, rope technology, process control systems and real estate) with over 2,000 employees and a global turnover in excess of 650 million CHF in 2014.
Brugg Pipesystems has factories in Switzerland and Germany with over 400 employees and turnover of over 160 million CHF. Brugg flexible and rigid, pre-insulated or safety pipe systems are used in many sectors of the con-struction industry.
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 6
PIPE2000 Ltd was established in 1986 with offices and warehousing in Benfleet Essex. PIPE2000 sells and distributes Brugg pre-insulated pipe systems nationally throughout the UK. Sales support is provided to specifiers, constructors, M&E contractors and other trade professionals. PIPE2000 have maintained sustained growth in all areas of sales.
“The acquisition of PIPE2000 underlines our commitment to expanding the already high level of customer service that PIPE2000 provides and to firmly establishing our brands as UK leaders in quality, innovation and reliability. The current management and staff of PIPE2000 Ltd will continue to be key members of our team. The Board of Directors will be further strengthened by the addition of Urs Bollhalder, Michael Sarbach and Andreas Pitschak”, Urs Bollhalder, CEO of Brugg Pipesystems division, said.
Contacts: Brugg Group, www.Brugg.com / Brugg Rohrsystem AG, Germany and Switzerland, www.pipesystems.com /
Brugg Pipesystems UK Ltd (formerly PIPE2000 Ltd), United Kingdom, www.Bruggpipesystems.co.uk [email protected]
Uponor’s improved Performance supported by North America in 2015
FY 2015 report
Financial statements bulletin 2015: Uponor’s improved performance supported by North America and pick-up in Europe in the fourth quarter 2015. Uponor's 2015 consolidated net sales from continuing operations amounted to €1,050.8 (2014: €1,023.9) million, up 2.6% year-on-year.
KWD-globalpipe, 22.02.2016. In general, construction activity in Uponor’s markets remained subdued during 2015, with no significant growth from the previous year. Although construction accelerated markedly in a few
key markets, such as the USA, the Netherlands and Sweden, most markets showed few signs of noteworthy recovery from their already constrained levels of economic activity.
Building Solutions – Europe’s net sales declined by -2.5%, reflecting the weak performance in the first three quarters of the year. Notwithstanding the short-term pick-up in demand in the last two months of the year, European markets have generally re-mained flat, with Sweden and the Netherlands standing out as the few brighter spots. The strength of the fourth quarter 2015 was supported by mild weather especially in northern Europe, some pre-stocking among customers, as well as the timing of commercial projects in Germany.
Building Solutions – North America: Through a series of manufacturing expansions over recent few years, Building Solutions – North America has been able to sustain sturdy net sales growth over a lengthy period of time, and 2015 was no exception. Due to currency changes, reported net sales in euro were particularly strong. Net sales developed healthily in the U.S., driven by the plumbing busi-ness in particular. Thanks to a strong final quarter, the Canadian business also posted growth, mainly driven by significant new product innovations in the indoor climate segment of the market.
Uponor Infra’s net sales for 2015 saw a clear decline, a bit over half of which originated in the di-vested Thai and Extron business units, which had combined net sales in 2014 of €28.6 million. The segment’s continuing net sales decline was mainly driven by weak development in Poland + Canada.
Sales by product areas: Within the business groups, the share of Plumbing Solutions represented 45% (39%), Indoor Climate Solutions 25% (27%), while Infrastructure Solutions represented 30% (34%) of Group net sales.
The largest 10 countries, in terms of reported net sales, and their respective share of consolidated net sales, were as follows (2014 figures in brackets): the USA 23.9% (17.6%), Germany 13.0% (13.9%), Finland 11.8% (13.2%), Sweden 8.9% (9.2%), Canada 7.9% (8.2%), Denmark 4.5% (4.7%), the Netherlands 3.5% (3.1%), the United Kingdom 3.4% (3.5%), Norway 2.9% (3.6%), and Spain 2.8% (2.8%).
Net sales 2015 by segment Building Solutions – Europe –2.5% Building Solutions – North America +37.4% Uponor Infra –11.2%
Total +2.6%
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 7
Short-term outlook: No major changes in outlook are in prospect in Uponor's key geographic areas. Economic trends are likely to continue in a similar manner to the last two years, i.e. North America continuing to experience lively economic growth, while Europe struggles with stagnant economies and lack of growth drivers. Overall, the Asian markets, which remain of marginal importance to Up-onor, are expected to perform at their current levels, but economic trends there may change unex-pectedly, posing a risk to global market developments.
Contact: Uponor Corporation, Vantaa, Finland, www.uponor.com
AENOR/ESP: New Certifications between January 2014 and December 2015
Certifications
AENOR is a private, independent, non-profit making Spanish Body, recognized at national, European and international levels.
KWD-globalpipe, 22.02.2016. Through the development of Standardization and Certifica-tion (S+C) activities, it contributes to the improvement of quality in enterprises, their prod-ucts and services, as well as to the protection of the environment and thus to the well-being of the of the society.
AENOR is the Spanish standardization body with competence in all industrial and service sectors. Thousands of certified products and enterprises guarantee AENOR’s experience in certification of all branches of industry and services, the activity for which it has some
highly qualified personnel.
Please find in the following a list with all new marks of conformity between January 2014 and December 2015 concerning PP-R, PE-RT, PE-RT/Al, PEX and PEX/Al pipes and piping systems for hot and cold water installations inside buildings:
New AENOR marks of conformity between January 2014 and December 2015
Company/Country Product Production site Date
ABN Pipe/ESP PP-RCT/PP-RCT+GF/PP-RCT pipe for hot and cold water installations
Valladolid/ESP 08.04.2014
Auray Managing/ESP PE-Xa pipe (16-25mm) for hot and cold water installations PIPEX - AENOR No. 001/006395
Palau/ESP 16.07.2015
Barros & Moreira/PRT PP-R pipe for hot and cold water installations
Factory: Jakko in Istan-bul/TUR
08.04.2014
Braseli Tubos/ESP PE-RT pipe for hot and cold water installations
Alava/ESP 03.11.2015
Brass & Fittings/ESP
PE-Xa pipe for hot and cold water installations
Factory: Industrial Blansol in Barcena/ESP
20.05.2015
PE-Xb/Al multi layer piping system for hot and cold water installations
Pipe factory: Wuxi in Jiang-su/CHN; Fitting factory: Efield Tengzhou/CHN
16.07.2015 PE-Xa piping system for hot and cold water installations (Sliding Sleeve) Pipe factory: Pipex in Manza-
nares/ESP; Fitting factory: Efield Tengzhou/CHN PE-Xa piping system for hot and cold
water installations (Pressfitting)
Coes/ITA PP-R/PP-R+GF/PP-R pipe for hot and cold water installations
Factory: Novaplast in Iz-mit/TUR
15.07.2014
Dizayn/TUR PP-R pipe for hot and cold water installations
Tekirdag/TUR 15.12.2015
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 8
Fercofloor/ESP PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Pipex in Pa-lau/ESP; Fitting factory: Super Fitting in Yixing/CHN
16.07.2015
Fittings Estandar/ESP PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Pipex in Pa-lau/ESP; Fitting factory: Super Fitting in Yixing/CHN
16.07.2015
FV-Plast/CZE PP-R piping system for hot and cold water installations
Celakovice/CZE
09.01.2015
16.07.2015
Geberit/ESP
PE-RT/Al multi layer piping system for hot and cold water installations GEBERIT MEPLA (16-75mm) with Pressfitting - AENOR No. 001/006340
Pipe factory: Geberit in Givisiez/CHE; Fitting factory: Geberit in Jona/CHE
13.04.2015
Global Piping System - AC-FIX/ESP
PE-Xa pipe for hot and cold water installations AC-FIX PEX-a (12-110mm) - AENOR No. 001/006348
Factory: Golan in Jordan Valley/ISR
13.04.2015
PE-Xa piping system for hot and cold water installations AC-FIX PEX-a (16-32mm) with PLASTIC RING "Shrink-Fit" (Pressfitting, using the shrinking back effect) - AENOR No. 001/006485
Pipe factory: Golan in Jordan Valley/ISR; Fitting factory: Falcon in Ningbo/CHN
03.11.2015
Grupo Plásticos Ferro, S.L. (GPF)
PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Braseli Tubos in Alava/ESP; Fitting factory: ICMA in Cuggiono/ITA
15.12.2015
Heliroma/PRT PP-R piping system for hot and cold water installations (Electrofusion)
Albergaria/PRT 09.02.2015
Idsa & Sacs/ESP
PE-Xa pipe for hot and cold water installations Factory: Golan in Jordan
Valley/ISR 21.05.2014
PE-Xc pipe for hot and cold water installations
IVAR/ITA PE-Xb pipe for hot and cold water installations
Factory: Unidelta in Vestone/ITA
16.07.2015
Los Siete Hermanos del Bonillo/ESP
PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Pipex in Pa-lau/ESP; Fitting factory: Super Fitting in Yixing/CHN
16.07.2015
Multicapas/ESP
PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Westfälische Rohrwerke in Ahlen/DEU; Fitting factory: Simplex in Argenbühl/DEU and Tuberia Roman in Cixi/CHN
08.04.2014
PE-Xa pipe for hot and cold water installations
Factory: Pipex in Manza-nares/ESP
20.05.2015
Nupi Industrie Italiane (formerly: Nupigeco)/ITA
PP-R/PP-R+FV/PP-R pipe for hot and cold water installations
Busto Arsizio/ITA 12.02.2014
PP-RCT pipe for hot and cold water installations
Castel Guelfo/ITA 13.04.2015
Reboca/ESP PP-R/PP-R+GF/PP-R pipe for hot and cold water installations
Valencia/ESP 09.02.2015
KWD-globalpipe 590 February 22, 2016
www.kwd-globalpipe.com page 9
Roth Industries/DEU
PE-RT/Al multi layer piping system for hot and cold water installations HTP-push LAYER (16-32mm) - AENOR No. 001/006204 Pipe factory: Heliroma in
Albergaria/PRT; Fitting facto-ry: HTP in Granada/ESP
08.04.2014 PE-Xa pipe for hot and cold water installations HTPpush and HTPpush PEX (16-32mm) - AENOR No. 001/006205 and 001/006206
Shureco Iberica/ESP
PE-Xb/Al multi layer piping system for hot and cold water installations SHURECO (16-63mm) with Pressfit-ting - AENOR No. 001/006307
Pipe & fitting factory: Mingshi in Zhuji/CHN
04.11.2014
Standard Hidraulica/ESP
PE-Xc/Al multi layer piping system for hot and cold water installations Pipe factory: Henco in Her-
entals/BEL; Fitting factory: Comap in Brescia/ITA 15.07.2014
PE-RT/Al multi layer piping system for hot and cold water installations
PE-Xb/Al multi layer piping system for hot and cold water installations
Pipe & fitting factory: Mingshi in Zhuji/CHN
Torneiras Monteiro/PRT
PE-Xb/Al multi layer piping system for hot and cold water installations MONPEX (16-63mm) - AENOR No. 001/006295
Pipe & fitting factory: Mingshi in Zhuji/CHN
04.11.2014
Valvulas Arco/ESP
PE-RT/Al multi layer piping system for hot and cold water installations
Pipe factory: Braseli Tubos in Alava/ESP; Fitting factory: Efield in Tengzhou/CHN
03.11.2015
PE-Xb/Al multi layer piping system for hot and cold water installations
Pipe factory: Wuxi in Jiang-su/CHN; Fitting factory: Efield Tengzhou/CHN
15.12.2015
We cannot guarantee its correctness and completeness.
Contact: AENOR, Spain, www.aenor.es