Date post: | 14-Jan-2016 |
Category: |
Documents |
Upload: | easter-skinner |
View: | 214 times |
Download: | 0 times |
Contents:
Project Overview Page 1
Door Installation Page 2
Door Installation Page 3
Walk-on Ceilings Page 4
Ceiling Bulkheads Page 3
Equipment Integration Page 5
Equipment Integration Page 6
Bump Rails & Bollards Page 7
Fournier - Project Profile
Project Overview
This € 1,400,000 project included walk-on panel ceilings, interior cleanroom walls, Phenolic resin sliding doors, Rapid roller doors, hinged doors and interlocking, Epoxy floors, and various items of furniture and barriers.
Scope of Works
Ceilings – 2,500m2 of 50mm thick walk-on ceiling flush panels.
• Partitions – 3,000m2 of metal faced fully flush FM approved panelling 50mm thick
• Doorsets – Provision of approx 10 hinged, 20 sliding, and 10 Rapid Roll Doors.
• Interlocking – Design, supply, installation and commissioning of interlocking to 10 doorsets
• Furniture – Design, manufacture and installation of recessed access panels to safe change units and utility stations.
•Bump rails - Supply & installation of stainless steel bump rails 50mm diameter.
• Structural – Design, supply and installation of all steel support structures for the support of the rapid roll doors.
• HVAC – Low level air extract casings.
•Flooring - Supply and installation of MCDur Epoxy flooring.
Fournier – Project Overview
HPL faced sliding doorset
Fournier – Door Installation
Rapid roll door integrated into wall panels.
Corridor with sliding doors
Fournier – Door Installation
Interlocked rapid roll door s.
Flush Walk-on Ceiling
Fournier – Walk-on Ceiling
Ceiling Suspension Detail.
Ceiling Bulkheads
Fournier – Ceiling Bulkheads
Integration with wall and ceiling panels
Fournier – Equipment Integration
Ceiling Junction Detail.
Autoclave Integration into wall panels
Fournier – Equipment Integration
Large Vessel Integration
Bollards to Rapid Roll Doors
Fournier – Bollards & Bump Rails
Floor Mounted Bump Rails