Total System Solutions

Due to our continual effort to provide the best products available and adhere to market conditions; literature, products, prices and availability are subject to change without notice.

Continuous Interlock Anti-Fatigue Mat SystemJ&D’s Continuous Interlock Anti-Fatigue Mat System, featuring the SDM3660 mat, is a durable, yet comfortable, mat system for agricultural applications. Layer the mats into a two or three layer system, and top with our slip-resistant continuous rolled rubber to create a complete cow comfort system. The SDM3660 Anti-Fatigue mat is also an excellent choice for parlors and wash areas due to the easy drainage design.

System Features• 100% rubber mat system• 2 or 3 layer Anti-Fatigue mat system to fit your budget• Ideal for any stall spacing• Continuous runs up to 100’• Quick and easy installation to minimize herd disruption and save on labor costs• Non-absorbent• Insulates against moisture and cold• 2 Year Warranty covers normal freestall use

• SDM3660 Anti-Fatigue Mat - 3’ x 5’ interlocking design for continuous runs - 5/8” thick single mats are easy to handle and easy to install - Cutout raised design provides exceptional drainage to quickly drain liquids away from mat - Anti-fatigue for humans and animals - Withstands temperatures from -55°F to175°F - Excellent rebound - Durable and tear resistant

- Cutout raised design provides exceptional drainage to quickly drain liquids away from mat- Anti-fatigue for humans and animals- Withstands temperatures from -55°F to175°F- Excellent rebound- Durable and tear resistant

• SDR1065 Continuous Rolled Rubber - 10mm seamless rubber available in 50’ or 100’ rolls - Slip resistant hammered texture surface - Mesh inlay for added strength and to prevent tearing - Improves bedding retention - Hygienic non-absorbent surface that will not rot or mold - Easy to clean

em Feat res

SDM3660Anti-fatigue mat (2 layer system)

PP10178Black poly

bevel edged kick strip

PP10802Black poly hold down

A

d

, is a durable, o or three layere cow comfortwash areas

SDM

SDR1065Rolled rubber

with mesh inlay

2 or 3 LayerSystemsAvailable

Due to our continual effort to provide the best products available and adhere to market condi

• Non-absorbent• Insulates against moisture and cold• 2 Year Warranty covers normal freestall usey

167

www.jdmfg.com jdmfg@jdmfg.com P:1-800-998-2398 F:1-888-972-4454

Due to our continual effort to provide the best products available and adhere to market conditions; literature, products, prices and availability are subject to change without notice.

Continuous InterlockAnti-Fatigue Mat System

___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Part#SDR1065SDR1065-50SDPS100SDM100SDM3660Replacement PartsPP10802PP10178HD10325HD10326HD10327

DescriptionRolled Rubber, with Mesh Inlay, 10mm x 65” x 100’ RollRolled Rubber, with Mesh Inlay, 10mm x 65” x 50’ RollStart/End Kit or Splice Kit with HardwareInstallation Kit, 12’ with HardwareInterlocking Anti-Fatigue Mat, ⅝” x 36” x 60”

Hold Down, 1” x 1½” x 12’, Poly, BlackKick Strip, ⅝” x 2 ⅜” x 12’, Poly, Black Screw, #10 x 1¼”, Stainless Steel Truss HeadAnchor, Perma-Grip, ¼” x 3”Washer, Fender 5/16

” x 1¼”, Stainless Steel

How to order:1. Choose your 100’ or 50’ Rolled Rubber length based on the total coverage area required.2. Add one SDPS100 kit each time you start a run, end a run, or splice together a run.3. Divide the total coverage length by 12 to determine how many 12’ SDM100 Installation Kits you will need. Round up to the nearest whole number. 4. For a 2-layer Anti-Fatigue Mat System, divide the total length of coverage by 3. Round up to the nearest whole number and multiply by 2 to determine the number of SDM3660 Anti- Fatigue Mats needed.5. For a 3-layer Anti-Fatigue Mat System, divide the total length of coverage by 3. Round up to the nearest whole number and multiply by 3 to determine the number of SDM3660 Anti- Fatigue Mats needed.

2 Year Warranty Covers Normal Freestall Use

SDM3660

168