CONTRIBUTORY PRESENTATIONS – APM 2020
APM Code Name of the Speaker Affiliation Title of Talk Oral /
Poster
APM 20OL01 Neha Sonker Govt. Autonomous Model Sciences College,
Jabalpur, India
Designing of Superparamagnetic Iron Oxide- Soya Protein nanoparticles as core-shell structure and release
behaviour of 5-florouracil drug
P
APM 20OL02 Krishna Kant Mourya Altem Technologies Pvt. Ltd. Accurate materials modeling of reinforced plastic parts using moldex, digimat & marc to enhance the quality standard of
reinforced plastics processing
O
APM 20OL03 Sapana Guru Bose Memorial Research Laboratory, Government Autonomous Science
College, Jabalpur
Multicomponent Red-Mud Polymer Composite Materials for
Neutron Shielding Application P
APM 20OL04 Lipsa Shubhadarshinee, Priyaranjan Mohapatra,
Aruna Kumar Barick
Veer Surendra Sai University of
Technology, Sambalpur
Study of Thermal and Dielectric Properties of Silver
Nanoparticle decorated functionalized Single-Walled Carbon
Nanotube Hybrid Nanofiller reinforced Polyaniline Nanocomposites
P
APM 20OL05 Prasanna Gantigemane
Parameshwara
Konkan Speciality Polyproducts Pvt Ltd.
SJCE, Mysore
Investigation of Antioxidants Effect on Recycled Polyethylene
Multilayer Rotomolded Water Storage Tanks P
APM 20OL06 Pallavi Shukla Rani Durgavati University, Jabalpur Morphological, Structural and mechanical behavior of cellulose acetate –poly (acrylic acid) based semi IPNs as possible
material for industrial and biomedical applications
O
APM 20OL07 Mohit Goswami, Santanu
Chattopadhyay IIT Kharagpur
Synergistic effect of silica in carbon black filled styrene butadiene rubber: Fracture analysis using finite element
method
O
APM 20OL08 Reshma Haridass, B.T.S.
Ramanujam, M. Sivakumar
Amrita Vishwa Vidyapeetham,
Coimbatore
Effect of polyvinylpyrrolidone (PVP) on the dispersion
characteristics of graphite nanosheets in polyvinylidene fluoride (PVDF) matrix: Analysis of electrical and thermal properties
O
APM 20OL09 Rashi, Bharti Gaur, A.S.
Singha NIT Hamirpur
Synthesis and chraracterization of PVA modified sulphonated
poly (arylene ether ketone-1 and 2) as proton exchange membranes for fuel cell applications
O
APM 20OL12 Anitha C Kumar Acharya Nagarjuna University, Guntur Polymer/peptide nanoparticles and hydrogels for biomedical
applications O
APM 20OL13 Divya Praveen Ottoor Savitribai Phule Pune University, Pune Carbon dots incorporated pH responsive agarose hydrogel nanocomposites for controlled release of norfloxacin
O
APM 20OL14 R. Mrudhula and P. Dinesh Sankar Reddy
NIT Andhra Pradesh Synthesis of Cellulose Nanofibers from Plant Residues and their Applications in Production of Biodegradable Polymers
O
APM 20OL15 Debabrata Ganguly and Santanu Chattopadhyay
Rubber Technology Centre, IIT Kharagpur
Rheological Studies on Mechno-Adaptive and Electrically
Conductive Rubber Ceramic-Waste Composites with Reduced
Carbon Footprint
O
APM 20OL16 Rajesh Vade Nath, Marcel Bosma and Arun Kumar
SABIC Research and Technology Private Limited, Bengaluru
A global perspective on legislative regulatory requirements
needed to notify Active and Intelligent (A&I) food packaging
polymeric materials
O
APM 20OL17
Ankita Sharma, Chetna
Verma, Amlan Gupta, Samrat Mukhopadhyay,
Bhuvanesh Gupta
Department of Textile and Fiber Engineering, IIT Delhi
Development and characterization of biopolymer based nanocomposite membranes for biomedical application
P
APM 20OL18
Pratibha Singh, Amlan
Gupta and Bhuvanesh
Gupta
Department of Textile and Fiber Engineering, IIT Delhi
Development and characterization of carrageenan based bionanocomposite membranes for wound healing application
P
APM 20OL19 Rashmi Choubey Govt. Autonomous Model Science College, Jabalpur
Facile Synthesis of Silver Hydroxyapatite (AgHAP) nanoparticles
reinforced Poly (styrene)-Poly (methyl methacrylate) polymer nanocomposites and Study of Their Mechanical and Blood
Compatible Behavior
O
APM 20OL20 Arti Sharma Rani Duragavati Vishwavidhyalaya, Jabalpur
Facile Synthesis of Poly (vinyl alcohol) Supported Flexible Graphene oxide
O
APM 20OL21
Susandhya Rout, Aruna
Kumar Barick, Bigyan
Ranjan Jali
Veer Surendra Sai University of Technology, Burla
Bromide Ion (Br– ) detection by the Protonated form of 2-(1-H-Imidazol-2- ylthio)-3-methylnaphthalene-1,4-dione) complex
P
APM 20OL22 Ajithram A Kalasalingam Academy of Research &
Education
Investigation of water hyacinth (Eichhornia crassipes) natural
fiber composite properties P
APM 20OL23 Vandana Kumari , Samrat Mukhopadhyay, Bhuvanesh
Gupta
Department of Textile and Fiber Engineering, IIT Delhi
Development of Polycaprolactone-Gelatin Biocomposite for Biomedical Applications
P
APM 20OL24 Pradip K. Maji Dept of Polymer & Process
Engineering, IIT Roorkee
Nanocellulose from waste forest biomaterials: Potential
advanced applications O
APM 20OL25 Chetna Verma, Deepak Pathania, R. S Verma,
Bhuvanesh Gupta
Department of Textile and Fiber
Engineering, IIT Delhi
Functional Tragacanth Gum Nanogels for Anticancer Drug
Delivery P
APM 20OL26 Anagha M G and Kinsuk Naskar
Rubber Technology Centre, IIT Kharagpur
Development of Thermoplastic elastomers through reactive blending of SEBS-g-MA and TPU for application in automotive
industry
P
APM 20OL27 Panchami H.R and Arun M Isloor
Department of Chemistry, NIT Karnataka
Fabrication and Characterization of PES/Tannic acid
functionalized Organoclay nanocomposite membranes for
Protein rejection application
P
APM 20OL28 Manali Somani, Bhuvanesh Gupta
Department of Textile and Fiber Engineering, IIT Delhi
Antibacterial Polyurethane for Biomedical Application P
APM 20OL29
Hemakesh Mohapatra ,
Jorge Ayarza , Zhao Wang
and Aaron P Esser‐Kahn
IIT Kharagpur Mechanochemical strengthening of polymeric materials using piezoelectric nanoparticles
O
APM 20OL30 Supriya Das and Uttam Manna
Department of Chemistry, IIT Guwahati
A Chemically Reactive Facile Dip Coating Approach for
Developing Extremely Durable Superhydrophobic Polymeric Coating
O
APM 20OL31 Jyotiprakash Das and
Mrutyunjay Panigrahi Indus University, Ahmedabad Plastic bricks – A solution to the single used waste plastic O
APM 20OL32 Mohamed Ismail Khan MAGMA Engineering India Pvt Ltd,
Hyderabad
Optimisation of injection molding process and tool
development O
APM 20OL34 Anubhav Singh CIPET Lucknow A study on conducting polymers and their applications P
APM 20OL35 Pramod K. Sethy, Priyaranjan Mohapatra and
Sarat K Swain
Veer Surendra Sai University of Technology, Burla
Nano silver incorporated Polyacrylic acid/GO hybrid nanocomposites as packaging material
P
APM 20OL36 Amrit Pritam Rout, Nitin
Kumar, Deepshikha Datta CIPET Lucknow
Preparation and process optimization of chitosan extraction
from fish scales and its utilization in PVDF membrane P
APM 20OL37 Nimish Shah, Drashti Shah Institute of Technology, Nirma
University Nano Polymers for Smart Drug Delivery O
APM 20OL38 Shaikh Nazrul, L. Behera,
S. K. Swain North Orissa University, Baripada
Structural investigation of nano silver doped Magnesium-Aluminium Layered Double Hydroxide reinforced Chitosan-
grafted-Polyacrylonitrile bio-nanocomposites
P
APM 20OL39 C. Rajesh, Dinooplal, Divia
P
MES Keveeyam College Valanchery,
University of Calicut, Kerala
Biomposites from Nitrile Butadiene Rubber and Chicken feather
fiber: Effect of heat and oils on the mechanical properties P
APM 20OL40 R. Singhal, S. Agnihotri H.B.T.U.,KANPUR A Study on Novel Poly (AAc-NaAlg-SH) superabsorbent hydrogels for Adsorption of Dyes for from Industrial waste
water using Langmuir Isotherms
O
APM 20OL42 K.Sankar, D. Shoba
Rajkumar
Muthayammal Engineering College,
Rasipuram
Experimental Investigation on Flexural Behavior of retrofitted
beams using ferrocement with geopolymer mortar P
APM 20OL43 Anuradha Biswal and Sarat
K Swain
Veer Surendra Sai University of
Technology, Burla
Design of nano gold and CaCO3 embedded chitosan hybrid poly (acrylic acid) nanocomposite hydrogels for wound healing
applications
O
APM 20OL44 Neetha John, Leny Mathew, K.A Rajesh, B.
Srinivasulu, Alisha KX
CIPET Kochi Development of Novel fully Biodegradable PLA based value added products from water hyacinth plant and saving the
water bodies
P
APM 20OL45 Santosh P. Chakole and W.
B. Gurnule Kamla Nehru Mahavidyalaya, Nagpur
Synthesis, Characterization and Photoluminescent Studies of Organic Copolymer Resin-III Derived from 2,2-
Dihydroxybiphenyl, Phenylenediamine and Formaldehyde
P
APM 20OL46 Deepti Rekha Sahoo,
Trinath Biswal
Veer Surendra Sai University of
Technology, Burla
Impact of natural filler from Prawn shell powder (CaO) on the processing and properties of poly(Methylmetharylate-
coAcrylonitrile)
P
APM 20OL47 W. B. Gurnule and Y. U.
Rathod Kamla Nehru Mahavidyalaya, Nagpur
Photoluminescence and Antimicrobial Studies of Polymeric Resin II Derived From 8-hydroxyquinoline-5-sulphonic acid and
anthranilic acid
P
APM 20OL48 Sagitha P, Sujith A Materials Research Laboratory, NIT
Calicut
pH sensitive vitamin delivery from modified polyurethane
fibrous membrane P
APM 20OL49 Vidhya C.V., Juveena Piyus and Suni Vasudevan
Inorganic and Bioinorganic Research Laboratory, NIT Calicut
Zirconium oxide modified Polyaniline-Graphene oxide composites for electrochemical sensing of L-Tyrosine
P
APM 20OL50 V. N. Lad Chemical Engineering Department, SVNIT Surat
Composite Polymers as Efficient Materials for Proton Exchange Membranes
O
APM 20OL51 L.Muthulakshmi, J.Annaraj Madurai Kamaraj University, Madurai Investigation on EPS /chitosan coated biocomposite film for food packaging applications
O
APM 20OL52
J. Gurusiddappa, W.
Madhuri, K. Priya Dasan, R. Padma Suvarna
Srinivasa Ramanujan Institute of
Technology, Andhra Pradesh
Studies on electrical and dielectric properties of PEO-LiClO4/
CoO Composite polymer electrolytes O
APM 20OL53
Jugalraj Panda, Pradyut
Sengupta , Pratima k Mishra , Ajit Panigrahi
CSIR-IMMT, Bhubaneswar Experimental and Computational Study of Mg-Ti-O based
Complex Oxides for EMI Shielding Application P
APM 20OL54 Lakshmanan. K, Karunanithi .A, Sindu.R
and Sarojadevi. M
Anna University, Chennai Synthesis and characterization of new diamine based polybenzoxazine and its mechanical thermal and electrical
studies
O
APM 20OL55 K. Juraij, A. Sujith Materials Research Laboratory, NIT
Calicut
Fabrication of Bees wax modified Polyurethane/ethylene-co-
vinylacetate blend electrospun fibre for Oil/water separation O
APM 20OL56
Khushboo Kapoor,Neelima
Garg, Ajay K. Tyagi,
P.K.Kaicker, R. K. Diwan, Lalit Varshney
Shriram Institute for Industrial
Research, Noida
Effect of ionizing radiation pre-treatment of Sugarcane Bagasse
on its physico–chemical and morphological Properties P
APM 20OL57 Biswajit Suar, Deepsikha
Datta, Amrit Pritam Rout CIPET Lucknow
Utilization of Agricultural Waste Rice Husk for the Extraction of
Nano-Silica – Its Characterization, Modification and Application P
APM 20OL58
Subin Kaladi Chondath,
Rasha Rahman Poolakkandy, Roshima
Kottayintavida, Aswani
Thekkangil, Nishanth Karimbintherikkal Gopalan,
Suchithra Tharamel Vasu, Sujith Athiyanathil, Mini
Mol Menamparambath
Department of Chemistry and School
of Biotechnology, NIT Calicut
Microstructure Tuning of Polypyrrole−Silver Sheets at Bisolvent
Interface O
APM 20OL59 Prince Siddhartha,
Prasanna Kumar S Mural NIT Calicut
Piezoelectric Materials: Preparations, Characterization, and
applications as an Energy Harvester O
APM 20OL60 Swathi Erekath, Sreeram K.
Kalpathy
Department of Metallurgical and
Materials Engineering, IIT Madras
Photoinduced and Substrate Wettability-driven Patterning of
Azo-based Thin Polymer Films P
APM 20OL61 Anjali Govt Science College Jabalpur M.P A Comparative study on gelatin nanocarriers for improved
drug delivery systems O
APM 20OL62 R. Rarima, G. Unnikrishnan Polymer Science and Technology
Research Laboratory, NIT Calicut
Antibacterial poly(lactic acid)/nanosilver composites for
catalytic applications P
APM 20OL63 Mrudul Modak, Bharath H J, Shreya Patil, Shivashish
K, Arul Kashmir A
C-MET, Maharashtra Selective Dissolution of Inter-Diffused p-n Junction: An Approach to Enhance Charge Carrier Mobility of
Semiconducting Polymers
O
APM 20OL64
Vinaykumar Chitturi,
Jagadeesh Shivaprasad, Nagaraj Dhadesugur,
Deepika Malpani, Ranjith P,
Kavya A T, Bhaskar Patham
SABIC Research and Technology Pvt.
Ltd., Bengaluru
Polymeric Extrusion Applications: Use of Modeling and
Simulation to Probe the Rheological Underpinnings of Processability and Structure Development
O
APM 20OL65 Mohd. Rashid Khan, Kumar Anubhav, Smita Mathur
CIPET Lucknow Mechanical properties of composite based on unsaturated polyester resin filled with wood flour.
P
APM 20OL66
Shivashish Kulshreshtha,
Rahul Bakolia, Ramadoss Marimuthu, Bharat B. Kale
and Arul Kashmir Arulraj
Department of Chemical Engineering, NIT Calicut
Polymer Gel-based Device for Urea Absorption: Proof of Concept Towards Artificial Kidney Applications
O
APM 20OL67
Shivashish Kulshreshtha,
Rahul Bakolia, Ramadoss Marimuthu, Bharat B. Kale
and Arul Kashmir Arulraj
Department of Chemical Engineering, NIT Calicut
Bio-Compatible Flexible Pressure Sensor: Visionary Product for Health Industry
O
APM 20OL68 Shafeeq V H and G Unnikrishnan
Polymer Science and Technology Research Laboratory, NIT Calicut
Tuning Mechanical and Dielectric Properties of EVA/PU Blends by Incorporating a Biocompatible Filler
P
APM 20OL69 Satish T.S, Siddaramaiah JSSTU, Mysuru Effective Photostabilization of Polypropylene tapes for packaging applications
O
APM 20OL70 M P Ajith Bharadwaj Acharya Institute of Technology, Karnataka
Experimental Investigation of Mechanical of Glass/Carbon
reinforced Epoxy Hybrid Composites fabricated by Resin
Transfer Moulding
O
APM 20OL71 Pratibha Sharma, Pramit Dutta, Leena Nebhani
Department of Materials Science and Engineering, IIT Delhi
Enhancing thermal stability of bio-based polybenzoxazines via sustainable route
O
APM 20OL72 I. Nigam H B Technical University, Kanpur Water borne Acrylate-silica nanoparticles Coatings for ceramic
surfaces O
APM 20OL73
Harikrishnan Pulikkalparambil, Suchart
Siengchin, Jyotishkumar
Parameswaranpillai
The Sirindhorn International Thai-German Graduate School of
Engineering (TGGS), Bangkok,
Thailand
Effect of natural and synthetic fabric as sandwich layer on
spent coffee grounds/ bioepoxy hybrid composites: a comparison study
O
APM 20OL74 Praveen Kumar, Dr. P.K.
Mandal
Central Institute of Plastics
Engineering and Technology (CIPET)
,Ahmadabad Plot No. 630, Phase-IV, GIDC, Vatva,, Gujarat 382445
Correlation between composite microstructure and degradation mechanism in glass fiber reinforced composites under electrical
ageing
P
APM 20OL75
Rakhi Pal*, Bidisha
Sarangi*, Subham Kumar, Bishnu P. Panda
CIPET: Institute of Plastics Technology, Department of Material
Engineering & Technology,
Bhubaneswar, Odisha-751024, India
Effect of Kevlar fiber/Carbon fiber filled EPDM composites for
thermally protective application P
APM 20OL76 Sangeetha A, Bhuvana K P
& S K Nayak
School for Advanced Research in Polymers (SARP) – ARSTPS,
Department of Plastics Technology,
Central Institute of Plastics Engineering and Technology (CIPET),
Chennai
Inorganic Nanoparticle embedded Luminescent Polymer
Nanocomposite for Optoelectronic Applications P
APM 20OL77 R. Sabarish, S. Suchart
Center of Innovation in Design and
Engineering for Manufacturing, King
Mongkut’s University of Technology North Bangkok, 1518 Wongsawang
Road, Bangsue, Bangkok 10800, Thailand
Polyvinyl alcohol/carboxymethyl cellulose/ZSM-5 zeolite
biocomposite membranes as efficient dye adsorbent with good recyclability
O
APM 20OL78
Jyothi M S., Panuwad
Pawilai, Khantong Soontarapa, R Geetha
Balakrishna
Center for Nano and Material Sciences,
Jain University, Bangalore, Center of Excellence on Petrochemical and
Materials Technology, Department of Chemical Technology, Faculty of
Sciences, Chulalongkorn University,
Phayathai Road, Bangkok 10330, THAILAND
Separation of Nitrogen/Hexane/1-butene mixed gas by chitosan/zeolite composite membrane
O
APM 20OL79 Jyothilakshmi C G, Aayushi Wawre,Jignesh Shukla,
Pradeep Upadhyaya
CIPET-IPT Ahmedabad, Plot No.630,
Phase – Iv, Gidc, Vatva, Ahmedabad, Gujarat 38244, Chembond Chemicals
Limited, 404/B/Pi, Village Dudhwada, Ecp Road, Vadodara-391450, Gujarat.
Thin Wall Application Development With Additive Kemthin® In
Pc Abs Blend P
APM 20OL80
Vishnu K, Aayushi Wawre,
Jignesh Shukla, Vishal
Verma, Pradeep Upadhyaya
CIPET-IPT Ahmedabad, Plot No.630,
Phase – Iv, Gidc, Vatva, Ahmedabad, Gujarat 38244, Chembond Chemicals
Limited, 404/B/Pi, Village Dudhwada,
Ecp Road, Vadodara-391450, Gujarat.
Development of Polyamide and Polyolefin blends with
enhancement in thermal properties with compatibilizer P
APM 20OL81 Shankar K, Prakalathan K, Keerthivasan N
1Department of Plastic Technology,
CIPET: Institute of Plastic Technology, (Govt of India), Guindy, Chennai-
600032, Tamil Nadu (INDIA)
An Alternative New Generation Fuel from Plastic Wastes with more calorific value- An Energy Recovery method
P
APM 20OL82 Vikas Gole CIPET Mysore O
APM 20OL83 Edwin Joseph, Narasimhan Swaminathan
Department of Mechanical
Engineering, Indian Institute of
Technology Madras, India
Modification of silica-based rubber nanocomposites to improve the mechanical strength in tyres
O
APM 20OL84 Sanghamitra Acharya, T.U.Patro and Suwarna
Datar
Scanning Probe microscopy
Laboratory,Department of Applied Physics, Defence Institute of Advance
Technology, Deemed University, Girinagar, Pune-411025, India.
Thermally Reduced Graphene Oxide-Strontium Ferrite Nano Particles in Polyvinylidene Difluoride (PVDF) Composites as
Efficient Microwave Absorber in X-Band
O
APM 20OL85 Rakesh Kumar Giri,
Narasimhan Swaminathan
Department of Mechanical Engineering, Indian Institute of
Technology Madras, India
Comparison of Coarse-grained Models of cis-1,4-Polyisoprene O
APM 20OL86
Altamash Rangrej,
Shubham Tiwari, Aayushi
Wawre, Neel Mani Shrivastav, M. H. Shridhar
CIPET-IPT Ahmedabad, Plot No.630,
Phase – Iv, Gidc, Vatva, Ahmedabad, Gujarat 38244, Research and
Development (R&D) Centre, INEOS
Styrolution PVT. LTD. 51, GIDC Industrial
Estate, Nandesari, Vadodara- 391340, Gujarat, India
Preparation and Characterization of ABS/Nanomaterial Blends
and its Thermal and Electrical Analysis P
APM 20OL87 Soumen Sardar and Abhijit Bandyopadhyay
Department of Polymer Science and Technology, University of Calcutta, 92,
A.P.C. Road, Calcutta- 700009, India
Recent Trends in Energy Application of Cost Effective Polymer Encapsulated Perovskite Materials
O
APM 20OL88 Jyothiikaa M D, Sangeetha
A, Bhuvana K P, Nayak S K
Sathyabama Institute of Science &
Technology, Chennai, Central Institute
of Plastics Engineering & Technology, Chennai
Preparation & Characterization of cross linked biodegradable
plastic film with improved barrier properties P
APM 20OL89 Subhadeep Chakraborty
and Abhijit Bandyopadhyay
Department of Polymer Science and Technology, University of Calcutta, 92,
A.P.C. Road, Calcutta- 700009, India
Waste Water Treatment Using Natural Flocculants O
APM 20OL90 M.Divine Sharon CIPET Chennai Development Of Light Weight Polymer Composite Using High
Impact Poly Propylene With Glass Fiber P
APM 20OL91
A JACOB MOSES, A
SURESH BABU, and S ANANDAKUMAR
Department of Manufacturing
Engineering, Anna University, Chennai 600 025, India
PREPARATION AND CHARACTERIZATION OF BRAKED PAD
DEVELOPED USING WASTE MATERIALS O
APM 20OL92 R Karthikeyan, S Rajkumar,
R Joseph Bensingh
CIPET: School for Advanced Research in Polymers(SARP)-ARSTPS, Chennai-
600032
Experimental Investigation on the mechanical and delamination strength of Inconel particulate filler reinforced GFRP composite
for wind turbine application
P
APM 20OL93 Gabriel A CIPET Chennai Studies on Magneto Rheological Fluid Shock Absorber for
effective vibration control and electric current regeneration P
APM 20OL94
Jagadeshvaran P. L.,
Harsha Nallabothula, Aishwarya V. Menon and
Suryasarathi Bose
Department of Materials Engineering,
Indian Institute of Science, Bangalore
– 560012, India
Nano-infiltration as a strategy to enhance microwave attenuation in polymer nanocomposites
O
APM 20OL95 Jayashri Gunjal and Shakti
Chauhan
Institute of Wood Science and
Technology, Malleswaram, 18th Cross, Bengaluru
Effect of natural weathering on colour and mechanical
properties of wood-polypropylene composites P
APM 20OL96 Sanjay Remanan and
Narayan Chandra Das
Rubber Technology Centre, Indian
Institute of Technology, Kharagpur, West Bengal, 721302,India
Preparation of an Antibacterial and Oil Adsorbent Sponge
Regenerated from the Waste PVDF: an Efficient Reuse of Polymer Waste Solution
O
APM 20OL97
Diwahar. P, Bhuvana K.P ,
Prakalathan K and S.K. Nayak
CIPET: School for Advanced Research
in Polymers(SARP)-ARSTPS, Chennai- 600032
Preparation and characterization of light weight, high impact
polymer composite for hard armour applications P
APM 20OL98
Akash M Chandran, Varun
S, Ann Mary Paul, Aquib
Mohammed and Dr. Prasanna Kumar S Mural
Material Chemistry and Polymer
Technology Lab, Department of chemical engineering, National
institute oftechnology Calicut, Kerala,
673601, India
Surface energized inherent piezo ceramic BaTiO₃ doped PVDF
film for nanogenerator O
APM 20OL99
R.Mohanraj,
S.Soundararajan, T.O.Varghese, K.Palanivelu
and S.K.Nayak
Central Institute of Plastics Engineering and Technology, Guindy,
Chennai-32
Studies on Mechanical Electrical and Physical properties of Recycled HDPE reinforced with Woodflour Nanoclay/Microclay
P
APM 20OL100 Tarun Kumar Maity, S. Soundararajan
Central Institute of Plastics
Engineering and Technology, Guindy, Chennai-32
Effects of Compatibilizers on the Mechanical Properties Polypropylene Copolymer and Poly lactic acid blends
P
APM 20OL101
S. Varun, Akash M.
Chandran, Aishwarya Mohan, Prasanna Kumar S.
Mural
Material Chemistry and Polymer Technology Lab, Department of
chemical engineering, National institute oftechnology Calicut, Kerala,
673601, India
One-pot fabrication of piezoelectric PVDF with modified carbonaceous nanoparticles for energy harvesting
O
APM 20OL102 Thirumalazhagan D.K, Dr.S Soundararajan
Central Institute of Plastics
Engineering and Technology, Guindy, Chennai-32
STUDIES ON PROPERTIES OF PHOTO/BIODEGRADABLE FILMS OF LDPE-PLA BLEND WITH MICROCLAY
P
APM 20OL103 Swapnita Patra, S. K.
Swain
Department of Chemistry, Veer
Surendra Sai University of Technology, Burla ,768018, Sambalpur, Odisha
Nano gold decorated polyvinyl alcohol magnetic bead as
catalyst for reduction of 4-nitrophenol P
APM 20OL104 Swapnita Patra, Deepak
Sahu and Sarat K Swain
Department of Chemistry, Veer
Surendra Sai University of Technology, Burla ,768018, Sambalpur, Odisha
Nano silver based composites for catalytic reduction of 4-
nitrophenol O
APM 20OL105
Priya Bisht, Giridhar B.N.,
Sreeja Nair, Richa Bansal, K.K. Pandey
Institute of Wood Science and
Technology, 18th Cross Malleswaram, Bengaluru - 560003, India
Transparent wood composite from poplar wood P
APM 20OL106 Lingesh B V, B N
Ravikumar, Rudresh B M
Bangalore Institute of Technology, Bengaluru-560004, Government
Engineering College, K R Pet - 571426,
Karnataka, India
Thermal Characterisation of Glass and Basalt Fibers Reinforced
Hybrid Thermoplastic Blend Composites P
APM 20OL107 Prasanth M.S, Diwahar P Central Institute of Plastics
Engineering and Technology, Guindy,
Development of hybrid composite utilizing reused plastics films
with various fibers P
Chennai-32
APM 20OL108
Sinu Sanghamitra, Rohit
Kumar Baghel, and Mohit
Rajauriya
Central Institute of Plastics
Engineering & Technology: Institute of Plastics Technology (CIPET: IPT),
Patia, K I I T P. O., Bhubaneswar
Thermo plasticizing technology for the recycling of cross linked
polyethylene (XLPE) using inter-meshing co-rotating twin screw
extruder
P
APM 20OL109 Shubham Utekar, Adarsh Rao
Institute of chemical technology,Mumbai
Recycling of Thermosetting Polymer Composites – A Review O
APM 20OL110
Moumita Mistri, Pavan
Manvi, Bernd Michael Liebeck, Thomas Gries,
and Bhanu Bhusan Khatua
Indian Institute of Technology Kanpur, India
Crystallization Behavior of Polyethylene glycol (PEG)-plasticized Graphene-reinforced Poly(3-hydroxybutyrate) Melt-spun Fibers
P
APM 20OL111 Ritoban Ghosh, Shubham Utekar, Adarsh Rao
Institute of chemical technology,Mumbai
Novel Applications of Hydrogel P
APM 20OL112 Shubham Utekar, Ritoban Ghosh, Adarsh Rao
Institute of chemical technology,Mumbai
Recycling of Thermosetting Polymer Composites O
APM 20OL113 Saurabh Kumar CIPET Lucknow Laser Chemical Vapor Deposition P
APM 20OL114
Mohammad Arsalan Pasha,
Ritoban Ghosh, Shubham Utekar, Adarsh Rao
Institute of Chemical Technology,
Mumbai Blends of PP/HIPS P
APM 20OL115 Chetana Deoghare
Department of Chemistry, Institute of Sciences, Humanities and Liberal
Studies, Indus University, Rancharda, via Thaltej, Ahmedabad -382115,
Gujarat, India
Copolymers with Pendant “N-arylimide” Groups via Atom
Transfer Radical Polymerization: Synthesis, Characterization, and Kinetic Study
O
APM 20OL117 Koushik Banerjee
HASETRI, 437 Hebbal Industrial Area.
Near JK Radial Tyre Plant. Mysore - 570016, Karnataka
Influence of Regenerated Carbon Black from Polyester Waste
on the properties of TBR Tread Cap compound O
APM 20OL118
Abhilash R M, Jayshri
Gunjal, Venkatesh G S and Shakti Singh Chauhan
Institute of Wood Science and
Technology, Malleswaram 18th cross, Bangalore-560003
Tailoring Mechanical Properties of Bamboo Thermoplastic
Composite for Various Applications O
APM 20OL119 Niranjan Haridass Menon,
B.T.S. Ramanujam
Department of Sciences, Amrita School
of Engineering, Amrita Vishwa
Vidyapeetham, Coimbatore-641112, Tamil Nadu, India
Investigations of Electrical and Thermal properties of Polyvinylidene fluoride (PVDF)-Polyvinyl acetate (PVAc)-Natural
graphite Conducting Blends
O
APM 20OL120 Shilpi Tiwari, Kavita Srivastava, C L Gehlot and
Deepak Srivastava
Department of Plastic Technology, School of Chemical Technology,H B
Technical University, Kanpur – 208002
Epoxy/Fly ash from Thermal Power Plant /Nanofiller Nanocomposite: Studies on Mechanical and Thermal
properties: A Review
P