Convair Engineering - Authorised Distributors · 2016-04-26 · Convair Engineering Pty Ltd 93...

Parts Catalogue

Issue 3

Online ordering now available www.convair.com.au

Authorised Distributors:

Convair Engineering Pty Ltd

93 Miller StreetEpping VIC 3076Australia

Tel +613 9408 7255Fax +613 9408 [email protected]

www.convair.com.au

CONVAIR Parts Catalogue, Issue 3

Online ordering now

available at ww

w.convair.com

.au

1Order online www.convair.com.au | Sales support Phone 03 9408 7255 / Email [email protected] / Fax 03 9408 6820

Contents AerationAeration Cloths 2Gaskets, Aeration Pad 2Silo Aerators, Solimar 3Silo Aerators, Sure Seal 4Tanker Aerators, Bulk Tank Inc. 4Tanker Aerators, Solimar 6Tanker Aerators, Wear Plates 7

CamlocksAustralian Standard Camlocks 8NATO Standard Camlocks 9Camlock Accessories 11Camlock Seals 11

Filter ScreensBulk Tank Inc. Discharge Filter Screen 12FFB Stainless Steel 5 Micron Air Filter Screen 12

General Tanker SparesAir Dump Silencer 13Airline Pipe Fittings 13Bumper Bars 14Collapsible Handrail Parts 15Discharge Pipe Bends 16Discharge Pipe Clamps 17Gaskets 17Mudflaps 17Mudguard Parts 18Tanker Filters 18Toolboxes 19Tyre Carriers 19U Bolts 20Water Tanks 20

Hatches & SealsFFB Tipping Tanker Parts 21FFB Hatch Parts 21Fort Vale 22Knappco LM Manual Hatch 24Knappco SLS-2000 Auto Hatch Spares 25Kockums 26Liquip 26Marshall Lethlean 28Pivotal Edge 28Solimar 29

Hoses & ClampsAeration Hoses 31Aeration Hose Clamps 31Discharge Hoses 32Discharge Hose Clamps 33Tigerflex Hose Clamps 33Hosetails 34Hot Air Hoses 35Hot Air Hose Clamps 35Whip Check Cables 35

HosetubesHosetube Complete 36Hosetube Parts 37

LightingLucidity LED Lights 38

Pressure Gauges 39

Stickers & SignsConvair Tanker Operation Stickers 40FFB Tanker Operation Stickers 42

Suspension PartsFFB Aluminium Hangers 43FFB Aluminium Hanger Parts for BPW AL1 43FFB Aluminium Hanger Parts for BPW AL2 44FFB Aluminium Hanger Parts for SAF Intradisc 45

Swivel CouplingTodo 3" Swivel Coupling 46Spare Parts 46

ValvesAir Dump, FFB 47AKO Pinch Valves 47AKO Accessories 48AKO Flanges 48AKO Gaskets 49AKO Pinch Valve Controls 49AKO Sleeves 50Ball Valves, Airline 51Ball Valves, Todo 51Ball Valves, Todo Spare Parts 52Butterfly Valves, Bulk Tank Inc. 52Butterfly Valves, FFB 53Butterfly Valve Spares, FFB 53Butterfly Valves, Sure Seal 53Butterfly Valve Spares, Sure Seal 54Check Valves, Brass Swing Check 55Check Valves, FFB 56Check Valves, Knappco 57Check Valves, Posivent 57Pressure Relief Valves, Herose 58Pressure Relief Valves, Sure Seal 58Pressure Relief Valves, Certificates 59Sure Seal PRV Setting Parts 60Uni Joint for Remote Handle 61Vacuum Relief Valves 61

Blowers & CompressorsBetico Compressors 62Betico PTO Drive Accessories 62Betico Spare Parts 63 (See Appendix 2 for Betico Spare Parts Manual) CVS Siloking Screw Compressors 86CVS Siloking Spare Parts 86GD Bulkline Compressors 88GD Bulkline Spare Parts 88Gardner Denver Cycloblowers 90Cycloblower Spare Parts 90 (See Appendix 1 for Cycloblower Spare Parts Drawings)Gardner Denver Hydrapak Oil Coolers 98Gardner Denver Hydrapak Spare Parts 98CentaFlex Coupling 98F110 Tyre Coupling 99Companion Flanges 100Donaldson Air Filters & Accessories 100Fuel Tanks 103Isolation Mounts 103Lubricants 104Mounting Brackets, PTO Drive 104PTO, Chelsea 880 105PTO, Muncie 150% 105PTO, Muncie 195% 105PTO, Muncie PTO Seal Kit 105PTO, 12V double acting control kit 105PTO, 24V double acting control kit 105

AppendixCycloblower Spare Parts Drawings 106Betico Spare Parts Manual 111

Terms and Conditions of Sale 160

2 Order online www.convair.com.au | Sales support Tel 03 9408 7255 / Email [email protected] / Fax 03 9408 6820

AerationSubcategory

Subcategory

PART NUMBER TEXTDESCRIPTION Text









Aeration


Aeration

PART NUMBER C005HDDESCRIPTION Aeration cloth heavy duty suits BPT 850mm dia 22° 100mm hole

PART NUMBER C034DESCRIPTION Gasket upper aeration pad flange Convair 700mm dia.

PART NUMBER C052DESCRIPTION Gasket hold down strip Kockums 35mm wide

PART NUMBER C003HDDESCRIPTION Aeration Cloth heavy duty suits Convair & Kockums bolt on pad 800mm x 17°

PART NUMBER C035DESCRIPTION Gasket lower aeration pad flange Convair 150mm dia drg. CV4035A

PART NUMBER C053DESCRIPTION Gasket hold down strip Kockums 60mm wide

PART NUMBER C004HDDESCRIPTION Aeration Cloth heavy duty suits Convair & Kockums internal pad 800mm x 22°

PART NUMBER C036DESCRIPTION Gasket strip for Convair aeration pad drg. CV4035A

PART NUMBER C116DESCRIPTION Gasket upper aeration pad flange BPT

Aeration

Aeration Cloths

Gaskets, Aeration Pad

3Order online www.convair.com.au | Sales support Tel 03 9408 7255 / Email [email protected] / Fax 03 9408 6820

AerationContinued (Subcategory)




Aeration

PART NUMBER TextDESCRIPTION Text. Refer




AerationContinued (Gaskets, Aeration Pad)

PART NUMBER K4002DESCRIPTION Gasket upper aeration pad flange Kockums 800mm Dia.

PART NUMBER K4030-1DESCRIPTION Gasket aeration pad blanking flange Kockums

PART NUMBER K4030-2DESCRIPTION Gasket aeration pad hold down ring Kockums

Aeration

PART NUMBER S4304DESCRIPTION Solimar Silo Fluidizer, ⅟₂″ stainless steel stem, blue silicone disc. Capacity 10-20cfm @ 20-30psi.

PART NUMBER S4504DESCRIPTION Solimar Silo Fluidiizer 1″ stainless steel stem, blue silicone disc. Capacity 30-50cfm @ 5-10psi.

PART NUMBER S4124DESCRIPTION Solimar aerator blue disc

PART NUMBER S4900 & S4910DESCRIPTION Solimar silo aerator fast fit kit, and Solimar silo aerator Fast Fit installation tool (to be used in conjunction)

PART NUMBER S4124MDDESCRIPTION Solimar Metal Detectable Aerator Disc, food grade

Silo Aerators, Solimar

PART NUMBER S4164DESCRIPTION Solimar Aerator White EPDM Disc, food grade


AerationSubcategory

Subcategory










Aeration


AerationSilo Aerators, Sure Seal

Tanker Aerators, Bulk Tank Inc.

PART NUMBER AA710BDESCRIPTION Sure Seal Silo aerator, blue silicone disc, ⅟₂″ aluminium stem. Capacity 10-20cfm @ 20-30psi.

PART NUMBER B204DESCRIPTION BTI Blue silicone aerator disc

PART NUMBER AS710BDESCRIPTION Sure Seal Silo aerator, blue silicone disc, ⅟₂″ stainless steel stem. Capacity 10-20cfm @ 20-30psi.

PART NUMBER BW204DESCRIPTION BTI White EPDM aerator disc, food grade

Aeration

PART NUMBER B208DESCRIPTION BTI blue silicone aerator manifold Gasket






Aeration





AerationContinued (Tanker Aerators, Bulk Tank Inc.)

PART NUMBER B210DESCRIPTION BTI grey aerator tee handle

PART NUMBER B211DESCRIPTION BTI 1-Port Natural aerator manifold, natural

Aeration


PART NUMBER B301DESCRIPTION BTI Plenum aerator machined aluminium stem and stainless steel bolt (aerator disc not included)


PART NUMBER B215DESCRIPTION BTI aerator Tee Handle Gasket

PART NUMBER B205DESCRIPTION BTI grey aerator stem


AerationSubcategory

Subcategory










Aeration


AerationTanker Aerators, Solimar

PART NUMBER S4104DESCRIPTION Solimar Grey aerator Tee Handle

PART NUMBER S4124MDDESCRIPTION Solimar Metal Detectable Aerator Disc, food grade

PART NUMBER S4137DESCRIPTION Solimar white EPDM aerator manifold gasket

PART NUMBER S4112DESCRIPTION Solimar White EPDM aerator tee handle O Ring

PART NUMBER S4127DESCRIPTION Solimar blue silicone aerator manifold gasket

PART NUMBER S4164DESCRIPTION Solimar White EPDM aerator disc, food grade

PART NUMBER S4124DESCRIPTION Solimar Blue silicone aerator disc

PART NUMBER S4135DESCRIPTION Solimar aerator stem, Natural

Aeration






Aeration





AerationContinued (Tanker Aerators, Solimar)

PART NUMBER S4622DESCRIPTION Solimar 2 Port aerator Manifold Clear


Aeration

Tanker Aerators, Wear Plates

PART NUMBER A106DESCRIPTION Aerator wear plate suits internal front cone, stainless steel

PART NUMBER A107DESCRIPTION Aerator wear plate suits rear cone, stainless steel

PART NUMBER S4126BDESCRIPTION Wear plate, Solimar stainless steel, silicone backing seal



Camlocks

Subcategory

Subcategory










Camlocks


Camlocks

Australian Standard Camlocks

PART NUMBER S100-1DESCRIPTION Camlock Aust. Std aluminium 4″ male coupler to female BSP thread, sand cast

PART NUMBER S100-20DESCRIPTION Camlock Aust. Std aluminium 4″ female coupler to female BSP thread, sand cast

PART NUMBER S100-9DESCRIPTION Camlock Aust. Std aluminium 4″ female coupler to hosetail, sand cast

PART NUMBER S100-1SCRBDESCRIPTION Camlock Aust. Std bronze 4″ male coupler to female BSP thread

PART NUMBER S100-22DESCRIPTION Camlock Aust. Std aluminium 4″ male coupler to hosetail, sand cast

PART NUMBER S100-9BDESCRIPTION Camlock Aust. Std bronze 4″ female coupler to hosetail

PART NUMBER S100-2DESCRIPTION Camlock Aust. Std aluminium 4″ dustcap, sand cast

PART NUMBER S100-4DESCRIPTION Camlock Aust. Std aluminium 4″ male/male joiner, sand cast

PART NUMBER S80-1DESCRIPTION Camlock Aust. Std aluminium 3″ male coupler to female BSP thread, sand cast

Camlocks


Camlocks

Continued (Subcategory)




Camlocks





Camlocks

Continued (Australian Standard Camlocks)

PART NUMBER S80-13DESCRIPTION Camlock Aust. Std aluminium 3″ female coupler to 68° hosetail, sand cast

PART NUMBER PC100-C-BRDESCRIPTION Camlock NATO bronze 4″ female coupler to hosetail

PART NUMBER NA100-2DESCRIPTION Camlock NATO aluminium 4″ dustcap, sand cast

PART NUMBER S80-2DESCRIPTION Camlock Aust. Std aluminium 3″ dustcap, sand cast

PART NUMBER NA100-1SSDESCRIPTION Camlock NATO stainless steel 4″ male coupler to female BSP thread

PART NUMBER NA100-20DESCRIPTION Camlock NATO aluminium 4″ female coupler to female BSP thread, sand cast

PART NUMBER S80-9DESCRIPTION Camlock Aust. Std aluminium 3″ female coupler to hosetail, sand cast

PART NUMBER NA100-1DESCRIPTION Camlock NATO aluminium 4″ male coupler to female BSP thread, sand cast

PART NUMBER NA100-22DESCRIPTION Camlock NATO aluminium 4″ male coupler to hosetail, sand cast

Camlocks

NATO Standard Camlocks


Camlocks

Subcategory

Subcategory










Camlocks


Camlocks

Continued (NATO Standard Camlocks)

PART NUMBER NA100-4DESCRIPTION Camlock NATO aluminium 4″ male/male joiner, sand cast

PART NUMBER NA80-11DESCRIPTION Camlock NATO aluminium 3″ Female coupler to female BSP thread, sand cast

PART NUMBER NA80-9DESCRIPTION Camlock NATO aluminium 3″ female coupler to hosetail, sand cast

PART NUMBER NA100-9DESCRIPTION Camlock NATO aluminium 4″ female coupler to hosetail, sand cast

PART NUMBER NA80-13DESCRIPTION Camlock NATO aluminium 3″ female coupler to 68° hosetail, sand cast

PART NUMBER NA80-1DESCRIPTION Camlock NATO aluminium 3″ male coupler to female BSP thread, sand cast

PART NUMBER NA80-2DESCRIPTION Camlock NATO aluminium 3″ dustcap, sand cast

Camlocks


Camlocks





Camlocks





Camlocks

PART NUMBER NA-ARMDESCRIPTION 3″ - 5″ Brass Camlock Arm

PART NUMBER NA100-99DESCRIPTION 4″ NATO Camlock seal Hycar

PART NUMBER NA-PINDESCRIPTION 3″ - 5″ Brass Camlock Arm Pin

PART NUMBER NA80-99DESCRIPTION 3″ Camlock seal Viton. High temp, oil resistant, suits NATO & Aust. Std

PART NUMBER NA100-10DESCRIPTION Camlock Safety Clip suits 3″ & 4″ camlocks

PART NUMBER S100-99DESCRIPTION 4″ Aust. Std camlock seal Hycar

Camlocks

Camlock Accessories

Camlock Seals


Filter Screens

Subcategory

Subcategory










Filter Screens


Filter Screens

Bulk Tank Inc. Discharge Filter Screen

FFB Stainless Steel 5 Micron Air Filter Screen

PART NUMBER BTF-4X6-MF-3-8MDESCRIPTION Bulk Tank Inc. Pneumatic Conveying Filter Screen fitted with 3/8″ stainless steel Screen

PART NUMBER F004087DESCRIPTION FFB 3″ stainless steel 5 micron air filter screen

PART NUMBER BTI-003DESCRIPTION Bulk Tank Inc. stainless steel Filter screen/gasket 7/16″

PART NUMBER BTI-004DESCRIPTION Bulk Tank Inc. stainless steel Filter screen/gasket 1/4″ (please enquire for other sizes available: 5/16", 3/8", 5/8", 1")

Filter Screens


General Tanker Spares











Air Dump Silencer

PART NUMBER C059DESCRIPTION Convair air dump silencer & elbow

PART NUMBER STFTN-001DESCRIPTION Nipple 1⅟₂″ BSP 150mm Long Threaded Both Ends

PART NUMBER STFTN-006DESCRIPTION Nipple 4″ BSP 100mm Long Threaded One End

PART NUMBER STFTN-002DESCRIPTION Nipple 2″BSP 150mm Long Threaded Both Ends

PART NUMBER STFTN-010DESCRIPTION 2″ BSP nipple, profile cut threaded one end

PART NUMBER STFTN-005DESCRIPTION Nipple 3″BSP 150mm Long Threaded Both Ends

PART NUMBER F002902DESCRIPTION FFB Air Manifold Cap Seal



Airline Pipe Fittings



Subcategory

Subcategory













Continued (Airline Pipe Fittings)

PART NUMBER F081061DESCRIPTION FFB Top Air Branch manifold

PART NUMBER C042-3DESCRIPTION 3″ KNAPPCO Flange - blank 8mm Thick Mild Steel″

PART NUMBER F007464DESCRIPTION FFB Bumper Bar End Caps

PART NUMBER F9402253DESCRIPTION FFB 3″ Air manifold with 4 outlets

PART NUMBER C130DESCRIPTION 2″ BSP Male to Female thread gal 90 degree elbow

PART NUMBER C122DESCRIPTION Aluminium bumper bar painted white, pre-drilled mounting holes

PART NUMBER F9404362DESCRIPTION FFB 3″ Air manifold 2 port

PART NUMBER C131DESCRIPTION 2″ - 45 deg Male/ female gal elbow BSP


Bumper Bars













Collapsible Handrail Parts

PART NUMBER CHR-004DESCRIPTION Collapsible handrail pneumatic cylinder 63 x 250mm 62 Series

PART NUMBER CHR-006DESCRIPTION Collapsible handrail pneumatic cylinder Rod Clevis

PART NUMBER AFHRK-008DESCRIPTION Collapsible handrail pneumatic cylinder 63 x 250mm 62 Series

PART NUMBER CHR-005DESCRIPTION Collapsible handrail pneumatic cylinder Female Clevis Suit 80mm Bore

PART NUMBER AFHRK-002DESCRIPTION Reducing Bush 3/8″-1/4″

PART NUMBER AFHRK-001DESCRIPTION Banjo Flow Control 8 x 1/4″

PART NUMBER AFHRK-014DESCRIPTION Elbow Swivel 3/8″x1/4″ Air Brake

PART NUMBER CHR-007DESCRIPTION Collapsible handrail pneumatic cylinder Clevis Pin

PART NUMBER CHR-002DESCRIPTION Collapsible handrail 5/2 pneumatic control Valve 358-900 raise/lower toggle switch operation




Subcategory

Subcategory













Continued (Collapsible Handrail Parts)

PART NUMBER CHR-003DESCRIPTION Collapsible handrail 434-35 brake interlock valve 1/4″ 3/2

PART NUMBER F1014912DESCRIPTION FFB cast aluminium handrail clamp, 2 off required

PART NUMBER STPIBE45-001DESCRIPTION 4″ NB Discharge Pipe Bend 45deg Med. Blk. (Centre-line radius = 285mm)

PART NUMBER CHR-008DESCRIPTION Collapsible handrail raise/lower & interlock valve, push pull operation

PART NUMBER F204249DESCRIPTION FFB Rubber ladder lock (2 pieces)

PART NUMBER STPIBE90-001DESCRIPTION 4″ NB Discharge Pipe Bend 90 deg Med. Blk. (Centreline radius = 285mm)

PART NUMBER C117DESCRIPTION Tanker walkway non-skid paint kit

PART NUMBER AFHRK-010DESCRIPTION Sealco Pressure Protection Valve


Discharge Pipe Bends














Gaskets

PART NUMBER C133DESCRIPTION Gasket 6″ Table D Flange KSIL x 2.0mm 6327 - 8 Hole

PART NUMBER C010DESCRIPTION Convair Mudflap 24″ x 18″

PART NUMBER C037DESCRIPTION Convair Mudflap 24″x15″

PART NUMBER C073DESCRIPTION Convair Mudflap 24″ x 24″

Mudflaps

Discharge Pipe Clamps

PART NUMBER BTI-001DESCRIPTION Bulk Tank Inc. 4″ pipe coupler

PART NUMBER BTI-002DESCRIPTION Bulk Tank Inc. 4″ pipe coupler split gasket



Subcategory

Subcategory













Tanker Filters

PART NUMBER C038DESCRIPTION Convair internal Pancake filter 620mm DIA.

PART NUMBER C120DESCRIPTION Convair Pancake steel filter frame

PART NUMBER CL-025DESCRIPTION Worm drive stainless steel band suits C038

PART NUMBER F058021DESCRIPTION FFB Internal filter sock

PART NUMBER CL-026DESCRIPTION Worm drive banding buckle 12mm suits C038

PART NUMBER C002HDDESCRIPTION Kockums internal Filter Sock Heavy Duty


PART NUMBER F002463DESCRIPTION FFB Mudguard Bracket

PART NUMBER F010531DESCRIPTION FFB End Caps to suit mudguard mounting arm F1015491

PART NUMBER F1015491DESCRIPTION FFB Mudguard Mounting Arm (580mm long) switch operation

Mudguard Parts














Toolboxes

PART NUMBER TL-001DESCRIPTION Toolbox, plain aluminium 900 x 300 x 380 x 254 lockable door inc. gas strut

PART NUMBER TL-003DESCRIPTION Toolbox, plain aluminium 600 x 300 x 380 x 254 lockable door inc. gas strut

PART NUMBER F011394DESCRIPTION FFB plastic toolbox, large plastic

PART NUMBER TC-001DESCRIPTION Tyre carrier winch type UFK-220

PART NUMBER TC-002DESCRIPTION Tyre carrier winch type UFK-220 Handle

Tyre Carriers

Continued (Tanker Filters)

PART NUMBER CL-023DESCRIPTION 210-230mm W1 Worm Drive Clamp suits C002HD Filter Sock

PART NUMBER C021DESCRIPTION Kockums internal tube filter frame

PART NUMBER K5008DESCRIPTION Square filter cloth



Subcategory

Subcategory













Water Tanks

PART NUMBER WT-001DESCRIPTION Water Tank, plastic 20L

PART NUMBER WT-004DESCRIPTION Water Tank, Tap

PART NUMBER WT-002DESCRIPTION Water Tank, mounting brackets (pair)

PART NUMBER WT-003DESCRIPTION Water Tank, Soap Bottle


PART NUMBER FABU-001DESCRIPTION U-Bolt Stainless Steel 3″ for airline pipework

PART NUMBER FABU-002DESCRIPTION U-Bolt Stainless Steel 4″ for discharge pipework

U Bolts


Hatches & Seals





Hatches & Seals





Hatches & Seals

FFB Tipping Tanker Parts

FFB Hatch Parts

PART NUMBER F011519DESCRIPTION FFB inflatable bowl seal 600mm DIA.

PART NUMBER F008408DESCRIPTION FFB Hatch Seal FFB part no. 1026417

PART NUMBER F070566DESCRIPTION FFB bolt for tipper tanker cone M22 x 90mm

PART NUMBER F1056489DESCRIPTION FFB Hatch Quick action cam lever suits F9004859

PART NUMBER F9004522DESCRIPTION FFB Hatch brass cam lever wear plate

PART NUMBER F084450DESCRIPTION FFB inflatable tipping tanker cone seal 800mm DIA.

PART NUMBER F9004859DESCRIPTION FFB Hatch suits quick action cam levers

Hatches & Seals

PART NUMBER F9300934DESCRIPTION FFB plastic plug for wind down hatch levers

PART NUMBER F9400098DESCRIPTION FFB steel washers 5 x 35.5 x 55mm suits wind down hatch levers


Hatches & Seals

Subcategory

Subcategory










Hatches & Seals


Hatches & Seals

Continued (FFB Hatch Parts)

Fort Vale

PART NUMBER K10913SSDESCRIPTION Fort Vale hatch swingbolt pin

PART NUMBER F9400219DESCRIPTION FFB Hatch handle pin

PART NUMBER F9302492DESCRIPTION FFB Hatch, suits wind down hatch arms

PART NUMBER K299-4125DESCRIPTION Fort Vale hatch swingbolt M10

PART NUMBER K299-4175DESCRIPTION Fort Vale hatch swingbolt M10 (75mm)

Hatches & Seals

PART NUMBER F010935DESCRIPTION FFB Hatch handle pin circlip

PART NUMBER F1037177DESCRIPTION FFB wind down hatch arm

PART NUMBER F058570DESCRIPTION FFB CIRCLIP 35mm suits F1037177 FFB wind down hatch lever


Hatches & Seals





Hatches & Seals





Hatches & Seals

Continued (Fort Vale)

PART NUMBER K490-4000DESCRIPTION Fort Vale hatch handle

PART NUMBER K5111-110DESCRIPTION Fort Vale hatch M10x50 bolt

PART NUMBER K540-F136DESCRIPTION Fort vale hatch female swingbolt

PART NUMBER K5005-53SWRDESCRIPTION Fort Vale hatch seal

PART NUMBER K5112-008DESCRIPTION Fort Vale hatch M10 locknut

PART NUMBER K5111-002DESCRIPTION Fort Vale hatch M8x8 screw

PART NUMBER K5112-032DESCRIPTION Fort Vale hatch M10 half nut

Hatches & Seals


Hatches & Seals

Subcategory

Subcategory










Hatches & Seals


Hatches & Seals

Knappco LM Manual Hatch

PART NUMBER 3395DESCRIPTION Knappco black hatch seal (suits LM1010 hatch)

PART NUMBER 9209DESCRIPTION Knappco white hatch seal (suits LM1051 hatch)

PART NUMBER 3467DESCRIPTION Knappco aluminium weld ring

PART NUMBER 6832DESCRIPTION Knappco black nylon hatch wear plate

PART NUMBER 9583DESCRIPTION Knappco new hatch lever kit, inc. 6 x cam lever assemblies, 1 x safety catch and mounting hardware.

PART NUMBER 3523DESCRIPTION Knappco white hatch seal (suits LM1010 hatch)

PART NUMBER 6832-1DESCRIPTION Bolt & nut to suit Knappco wear plate #6832, 2 off required

Hatches & Seals

PART NUMBER LM1051DESCRIPTION Knappco aluminium pressure hatch inc. 6 x cam levers, 1 x safety catch and mounting hardware AS1210 compliant

PART NUMBER 3512DESCRIPTION Knappco steel hatch weld ring inc. hinge and cam lever lugs


Hatches & Seals





Hatches & Seals





Hatches & Seals

Continued (Knappco LM Manual Hatch)

Hatches & Seals

Knappco SLS-2000 Auto Hatch Spares

PART NUMBER 11014DESCRIPTION Knappco SLS-2000 5-2 pneumatic valve

PART NUMBER 11826DESCRIPTION Knappco SLS-2000 auto hatch pneumatic cylinder

PART NUMBER 11015DESCRIPTION Knappco SLS-2000 auto hatch 3-2 Pilot Spring Valve

PART NUMBER 11827DESCRIPTION Knappco SLS-2000 auto hatch pneumatic cylinder Rod End

PART NUMBER 11623 DESCRIPTION Knappco SLS-2000 auto hatch Bow tie clip for cylinder

PART NUMBER 11968DESCRIPTION Knappco SLS-2000 auto hatch air tubing coil for inflatable seal

PART NUMBER C001DESCRIPTION Hatch Basket (Suits 20″ Knappco Hatch)


Hatches & Seals

Subcategory

Subcategory










Hatches & Seals


Hatches & Seals

Continued (Knappco SLS-2000 Auto Hatch Spares)

Kockums

Liquip

PART NUMBER 11988DESCRIPTION Knappco SLS-2000 auto hatch air supply filter Regulator

PART NUMBER C026DESCRIPTION Kockums Type 3000 square black rubber hatch seal (suits fitment in top of tanker)

PART NUMBER 12211DESCRIPTION Knappco SLS-2000 auto hatch inflatable seal straight air fitting DOT 1/8″ NPT x 1/4″ tube

PART NUMBER C027DESCRIPTION Kockums Type 3000 ⅟₂ round black rubber hatch seal (suits fitment in the hatch)

PART NUMBER 12250AUDESCRIPTION Knappco SLS auto hatch seal to suit SLS-2000 hatch

Hatches & Seals

PART NUMBER PH18-16(AM)DESCRIPTION Liquip 18″ Pressure Hatch, Lid Only

PART NUMBER PH20L-16DESCRIPTION Liquip 20″ Pressure Hatch, Lid Only


Hatches & Seals





Hatches & Seals





Hatches & Seals

Continued (Liquip)

PART NUMBER PH18-9DESCRIPTION Liquip cam pin

PART NUMBER PH18-11DESCRIPTION Liquip cam bolt

PART NUMBER PH18-AC-SRDESCRIPTION Liquip 18″ Pressure Hatch lid, cam levers, mounting hardware & mild steel hatch ring

PART NUMBER PH18-12DESCRIPTION Liquip 4878 lock screw

PART NUMBER PH18-6DESCRIPTION Liquip nylon plug

PART NUMBER PH18-8DESCRIPTION Liquip cam handle

Hatches & Seals

PART NUMBER C049DESCRIPTION Liquip 18″ black rubber hatch seal

PART NUMBER C030DESCRIPTION Liquip 20″ black rubber hatch seal

PART NUMBER PH18-10DESCRIPTION Liquip neck pin (Threaded)


Hatches & Seals

Subcategory

Subcategory










Hatches & Seals


Hatches & Seals

Marshall Lethlean

Pivotal Edge

PART NUMBER ML001SDESCRIPTION Marshall Lethlean hatch seal

PART NUMBER PE102419DESCRIPTION Pivotal Edge auto hatch seal

PART NUMBER PE103962-1DESCRIPTION Pivotal Edge auto hatch control box to suit single hatch and stainless steel box.

PART NUMBER PE103843DESCRIPTION Pivotal Edge auto hatch assembly

PART NUMBER PEAIRTANKDESCRIPTION Airtank 24L multiport inc.2 X ⅟₂″ brass plug NPT, 4 X ₃∕₄″ brass plug NPT

PART NUMBER PE103885DESCRIPTION Pivotal Edge auto air knife assembly.

Hatches & Seals


Hatches & Seals





Hatches & Seals





Hatches & Seals

Solimar

PART NUMBER S3510DESCRIPTION Solimar hatch Pivot Block

PART NUMBER S3530DESCRIPTION Solimar Hatch Safety Washer

PART NUMBER S3544DESCRIPTION Solimar Hatch Hinge Plate, Steel

PART NUMBER S3516DESCRIPTION Solimar hatch Pivot Bolt

PART NUMBER S3531DESCRIPTION Solimar Hatch Hinge Bolt

PART NUMBER S3528DESCRIPTION Solimar Hatch Clamp Assembly

PART NUMBER S3543DESCRIPTION Solimar Hatch Seal

Hatches & Seals

PART NUMBER S3561DESCRIPTION Solimar Pressure Hatch Cover only, Aluminium AS1210 approved to 100kPa working pressure

PART NUMBER S3906DESCRIPTION Solimar Pressure Hatch assembly inc. all mounting hardware


Hatches & Seals

Subcategory

Subcategory










Hatches & Seals


Hatches & Seals

Continued (Solimar)

PART NUMBER CV012DESCRIPTION Solimar Hatch Weld Ring

Hatches & Seals

PART NUMBER S3550DESCRIPTION Solimar Hatch Safety Latch

PART NUMBER S3555DESCRIPTION Solimar Hatch Retaining Ring


Hoses & Clamps





Hoses & Clamps





Hoses & Clamps

Aeration Hoses

PART NUMBER H50RDESCRIPTION 2″ industrial rubber hose, wire reinforced

PART NUMBER H38RDESCRIPTION 1.5″ industrial rubber hose, wire reinforced

Hoses & Clamps

Aeration Hose Clamps

PART NUMBER CL-002DESCRIPTION Hose clamp, stainless steel 55-59mm H/Duty W2, suits H50R 2″ hose

PART NUMBER CL-021DESCRIPTION Hose clamp plated 35-50mm W1 Worm Drive, suits H38R 1⅟₂″ hose


Hoses & Clamps

Subcategory

Subcategory










Hoses & Clamps


Hoses & Clamps

Discharge Hoses

PART NUMBER F006057DESCRIPTION FFB 108mm ID Rubber Hose (For joining discharge pipe)

PART NUMBER H100-5.8DESCRIPTION 4″ Convair industrial abrasion resistant rubber discharge hose- 5.8m length

PART NUMBER H100DESCRIPTION 4″ Convair industrial abrasion resistant rubber discharge hose, per metre

PART NUMBER H100FLOURDESCRIPTION 4″ Alfagomma food grade, flour discharge hose inc. static wire, per metre

PART NUMBER H100-4.6DESCRIPTION 4″ Convair industrial abrasion resistant rubber discharge hose, 4.6m length

PART NUMBER H100PDESCRIPTION 4″ Tigerflex 2020 food grade polyurethene discharge hose per metre

Hoses & Clamps

PART NUMBER H100RMHDESCRIPTION 4″ Rubber, wire reinforced Stockfeed discharge hose, per metre

PART NUMBER HO-005SDESCRIPTION 4″ Radcoflex stainless steel, smooth lined discharge hose, per metre

PART NUMBER H100-JDESCRIPTION 114mm ID. rubber hose used for joining 4″ discharge pipe


Hoses & Clamps





Hoses & Clamps





Hoses & Clamps

PART NUMBER CL-011DESCRIPTION Hose clamp 112-121mm H/Duty W2 Clamp, suits H100 4”rubber discharge hose

PART NUMBER CL-012DESCRIPTION Hose clamp 121-130mm H/Duty W2 Clamp

PART NUMBER CL-013DESCRIPTION Hose clamp 130-140mm H/Duty W2 (to suit FFB 108mm discharge hose F006057)

Hoses & Clamps

Discharge Hose Clamps

PART NUMBER H100PCDESCRIPTION Hose clamp, 4″ double spiral for Tigerflex hose

Tigerflex Hose Clamps


Hoses & Clamps

Subcategory

Subcategory










Hoses & Clamps


Hoses & Clamps

Hosetails

PART NUMBER H100HDESCRIPTION 4″ Galvanised steel male BSP hosetail suits Tigerflex hose H100P

PART NUMBER H38HDESCRIPTION 1.5″ brass male BSP hosetail

PART NUMBER H80HDESCRIPTION 3″ brass male BSP hosetail

PART NUMBER H50HDESCRIPTION 2″ brass male BSP hosetail

Hoses & Clamps


Hoses & Clamps





Hoses & Clamps





Hoses & Clamps

Hot Air Hoses

Hot Air Hose Clamps

Whip Check Cables

PART NUMBER H100RDESCRIPTION 4″ food grade wire reinforced Hot Air Hose

PART NUMBER CL-007DESCRIPTION Hose clamp 85-91mm H/Duty W2

PART NUMBER H001DESCRIPTION 3″ & 4″ hose whipcheck cable

PART NUMBER H75DESCRIPTION 3″ Convair food grade wire reinforced Hot air hose, per metre

PART NUMBER H75-3.0DESCRIPTION 3″ Convair food grade wire reinforced Hot air hose, 3.0m length

Hoses & Clamps


Hosetubes

Subcategory

Subcategory










Hosetubes


Hosetubes

Hosetube Complete

PART NUMBER C064ADESCRIPTION Hose tube, aluminium complete inc. cap one end & swivel door & rubber latch 4.8m long

PART NUMBER C015ADESCRIPTION Hose tube, aluminium complete inc. cap one end & swivel door & rubber latch 6.0m long

Hosetubes


Hosetubes





Hosetubes





Hosetubes

PART NUMBER C064DESCRIPTION Hose tube, aluminium 200mm OD 4.8m long (tube only)

PART NUMBER C015DESCRIPTION Hose tube, aluminium 200mm OD 6.0m long (tube only)

Hosetubes

Hosetube Parts

PART NUMBER ALTU-004ADESCRIPTION Hose Tube, aluminium End Cap

PART NUMBER ALTU-007ADESCRIPTION Hose tube, aluminium swivel door stop

PART NUMBER ALTU-005ADESCRIPTION Hose tube, aluminium Swivel door (Hose Tube)

PART NUMBER GH-017ADESCRIPTION Hose tube, rubber latch for swivel door A1177

PART NUMBER ALTU-006ADESCRIPTION Hose tube, aluminium swivel door mounting Bracket

PART NUMBER FABU-003DESCRIPTION Hose tube, U-Bolt Stainless Steel 203mm ID, 20mm wide rolled 10mm rod.


Lighting

Subcategory

Subcategory










Lighting


Lighting

Lucidity LED Lights

PART NUMBER PH-M-BM-ARDESCRIPTION Side marker light LED, Lucidity (Phaser)

PART NUMBER PH-M-BM-TLDESCRIPTION LED Taillight assembly, Lucidity (Phaser)

PART NUMBER PH-M-BM-INDDESCRIPTION Side indicator light LED, Lucidity (Phaser)

PART NUMBER PH-M-BM-WLDESCRIPTION LED Worklight inc. switch, Lucidity (Phaser)

PART NUMBER PH-M-BM-INDMULTIDESCRIPTION Multi-function LED side marker/indicator, Lucidity (Phaser)

PART NUMBER PH-MB-STDDESCRIPTION Side Marker / Indicator Bracket

Lighting


Pressure Gauges





Pressure Gauges





Pressure Gauges

PART NUMBER C016-1DESCRIPTION Convair 4″ Pressure Gauge, 3/8″ BSP thread

PART NUMBER C014DESCRIPTION 1.5″ pressure gauge, rear connection

PART NUMBER C017DESCRIPTION 2.5″ Pressure Gauge, 1/4″ BSP thread

PART NUMBER F004553DESCRIPTION FFB 100mm Glycerin filled Pressure gauge 0-4 bar.

PART NUMBER NATA GAUGE CERT.DESCRIPTION NATA Pressure Gauge Certificate

PART NUMBER LS-033DESCRIPTION 4″ Pressure Gauge Redline

PART NUMBER F1013767DESCRIPTION FFB 2.5″ Glycerin filled Pressure gauge 0-6 bar.

Pressure Gauges

Pressure Gauges


Stickers & Signs

Subcategory

Subcategory










Stickers & Signs


Stickers & Signs

Convair Tanker Operation Stickers

PART NUMBER LS-004DESCRIPTION Open Label

PART NUMBER LS-007DESCRIPTION Aeration Label

PART NUMBER LS-010DESCRIPTION Safe Operation Label

PART NUMBER LS-005DESCRIPTION Close Label

PART NUMBER LS-008DESCRIPTION Top Air Label

PART NUMBER LS-011DESCRIPTION Warning Label

PART NUMBER LS-006DESCRIPTION Boost Label

PART NUMBER LS-009DESCRIPTION Air Dump Label

PART NUMBER LS-016DESCRIPTION LOOK UP - Handrail Label

Stickers & Signs

PART NUMBER LS-017DESCRIPTION Handrail Operation Label

PART NUMBER LS-019DESCRIPTION Hot Pipe Label

PART NUMBER LS-031DESCRIPTION Warning Sticker Fold Down Ladder


Stickers & Signs





Stickers & Signs





Stickers & Signs

Continued (Convair Tanker Operation Stickers)

PART NUMBER LS-032DESCRIPTION Warning Sticker Handrail

PART NUMBER LS-036DESCRIPTION Check function of relief valve monthly

PART NUMBER LS-039DESCRIPTION Maximum working pressure 160kPa

PART NUMBER LS-034DESCRIPTION Push to raise handrail



PART NUMBER LS-035DESCRIPTION Ensure tank pressure is zero before opening hatches




Stickers & Signs


Stickers & Signs

Subcategory

Subcategory










Stickers & Signs


Stickers & Signs

PART NUMBER F1103489DESCRIPTION FFB Boost Sticker Type 2

PART NUMBER F011349DESCRIPTION FFB Discharge Valve Open / Close


PART NUMBER F1103485DESCRIPTION FFB Aeration Sticker

Stickers & Signs

FFB Tanker Operation Stickers

PART NUMBER F1103490DESCRIPTION FFB Top Air Sticker

PART NUMBER F1063841DESCRIPTION FFB Hot Pipe Sticker



Suspension Parts





Suspension Parts





Suspension Parts

FFB Aluminium Hangers

FFB Aluminium Hanger Parts for BPW AL1

PART NUMBER F1043578DESCRIPTION FFB aluminium suspension hanger suits BPW AL1 & AL2 & SAF Intradisc

Suspension Parts

PART NUMBER F1026451DESCRIPTION FFB steel press in hub D170x50x7mm suits FFB hanger dwg 1043578 suits BPW AL1

PART NUMBER F8004232.QADESCRIPTION FFB ECCENTRIC DISK 102 X 15mm SUITS BPW AL1 drg 1043578

PART NUMBER F1063559DESCRIPTION FFB M30 EYEBOLT WASHER suits BPW AL1 drg 1043578

PART NUMBER F8004233.QADESCRIPTION FFB TOLERANCE WASHER D89 X 15mm SUITS BPW AL1 drg 1043578

PART NUMBER F205523DESCRIPTION FFB M30 LOCKNUT suits BPW AL1 see drg 1043578

PART NUMBER F1001931.QADESCRIPTION FFB suspension eyebolt M30*230 suits BPW AL1


Suspension Parts

Subcategory

Subcategory










Suspension Parts


Suspension Parts

FFB Aluminium Hanger Parts for BPW AL2

PART NUMBER F1060864DESCRIPTION FFB Eccentric disc suits BPW AL2 hanger F1043578

PART NUMBER F1094240DESCRIPTION FFB Steel press in hub 70 x 19mm suits BPW AL2 hanger F1043578

PART NUMBER F1060800DESCRIPTION FFB Spring arm spacer 108 x 21mm suits BPW AL2 hanger F1043578

PART NUMBER F1060891DESCRIPTION BPW M24 NUT for eyebolt suits AL2

PART NUMBER F1061054DESCRIPTION BPW M24 70x25x6mm washer for eyebolt suits AL2

PART NUMBER F1061637DESCRIPTION BPW M24x2x220 Eyebolt suits AL2

PART NUMBER F1060865DESCRIPTION FFB alignment washer suits BPW AL2 hanger F1043578

Suspension Parts


Swivel Coupling





Swivel Coupling





Suspension Parts

Suspension Parts

FFB Aluminium Hanger Parts for SAF Intradisc

PART NUMBER F1043519DESCRIPTION FFB aluminium suspension hanger suits SAF

PART NUMBER F059916DESCRIPTION FFB eccentric disc suits SAF drg. 1043519

PART NUMBER F053591DESCRIPTION FFB suspension eyebolt suits SAF drg. 1043519

PART NUMBER F059919DESCRIPTION FFB nut for eyebolt suits SAF drg. 1043519

PART NUMBER F059918DESCRIPTION FFB washer for eyebolt suits SAF drg. 1043519

PART NUMBER F1026451DESCRIPTION FFB steel press in hub D170x50x7mm suits BPW AL1 FFB hanger dwg 1043578 & SAF drg. 1043519


Swivel Coupling

Subcategory

Subcategory










Swivel Coupling


Tanker Vessel Parts

Subcategory

Subcategory










Tanker Vessel Parts

46 Order online www.convair.com.au | Sales support Tel 03 9408 7255 / Email [email protected] / Fax 03 9408 6820 46 Order online www.convair.com.au | Sales support Tel 03 9408 7255 / Email [email protected] / Fax 03 9408 6820

Swivel Coupling

Todo 3” Swivel Coupling

Spare Parts

PART NUMBER T6207DESCRIPTION TODO 3″ Swivel Coupling

Swivel Coupling

PART NUMBER T5563DESCRIPTION TODO swivel coupling Ball Bearing kit

PART NUMBER T6219DESCRIPTION TODO Wavy Washer for 3″ SWIVEL COUPLING

PART NUMBER T6207-1DESCRIPTION TODO swivel coupling seal kit

PART NUMBER T6207-3DESCRIPTION TODO GRUB SCREW M8 to lubricate Todo swivel coupling

PART NUMBER T6207-2DESCRIPTION TODO 3″ Swivel Coupling Gasket


Valves





Valves





Valves

Air Dump, FFB

PART NUMBER F1005779DESCRIPTION FFB 2″ Air Dump Valve

PART NUMBER F9403278DESCRIPTION FFB 2″air dump silencer

Valves

AKO Pinch Valves*

PART NUMBER VF100.03X.31.30LADESCRIPTION AKO 100mm VF Model pneumatic pinch valve, powder coated aluminium body, steel bushed DIN PN10 aluminium flanges, black natural rubber sleeve, 1/4″ air fitting. 6.0 Bar max. working pressure, 80°C max. temp rating.

PART NUMBER VF100.03X.33.30LADESCRIPTION AKO 100mm VF Model pneumatic pinch valve, powder coated aluminium body, DIN PN10 aluminium flanges, black natural rubber sleeve, 1/4″ air fitting. 6.0 Bar max. working pressure, 80°C max. temp rating.

PART NUMBER VT100.03X.33.30DESCRIPTION AKO 100mm VT Model pneumatic pinch valve, un-painted aluminium body, aluminium flanges, tapped mounting holes, black natural rubber sleeve, 1/4″ air fitting. 6.0 Bar max. working pressure, 80°C max. temp rating.

*Please contact us for further information on the wide range of AKO pinch valves available


Valves

Subcategory

Subcategory










Valves


Valves

AKO Accessories

PART NUMBER MP.200GDESCRIPTION AKO mounting paste

PART NUMBER MWF100DESCRIPTION AKO sleeve mounting kit for 100mm pinch valve

Valves

PART NUMBER VT100FLANGEDESCRIPTION Flange, laser cut steel 100mm to suit AKO 100mm VT Model pinch valve

AKO Flanges

PART NUMBER FF100.031LADESCRIPTION AKO 100mm Aluminium flange with steel bushing, suits VF Model valve

PART NUMBER FF100.33LADESCRIPTION AKO 100mm Aluminium flange, suits VF Model valve

PART NUMBER VF100FLANGEDESCRIPTION Flange, laser cut steel 100mm to suit AKO 100mm VF Model pinch valve

PART NUMBER FT100.33DESCRIPTION AKO 100mm Aluminium flange, suits VT Model valve


Valves





Valves





Valves

AKO Gaskets

PART NUMBER VF100GASKETDESCRIPTION Gasket, 100mm suits AKO VF Model pinch valve

PART NUMBER VT100GASKETDESCRIPTION Gasket, 100mm suits AKO VT Model pinch valve

Valves

AKO Pinch Valve Controls

PART NUMBER AFPVBTK-004DESCRIPTION SMC pneumatic valve for discharge direction control of AKO pinch valves

PART NUMBER AFPV-WAB2DESCRIPTION Straight fitting for WABCO switch, suits 8mm airline

PART NUMBER AFPV-WABDESCRIPTION WABCO Pneumatic Switch for AKO Pinch Valve operation

PART NUMBER CE-PP003-4DESCRIPTION Stainless steel Control Panel for operating 3 x AKO pinch valves

PART NUMBER AFPV-WAB1DESCRIPTION 90° Elbow fitting for WABCO switch, suits 8mm airline

PART NUMBER CE-PP003-5DESCRIPTION Stainless steel Control Panel for operating 4 x AKO pinch valves


Valves

Subcategory

Subcategory










Valves


Valves

PART NUMBER LS-029DESCRIPTION Convair discharge valve control sticker, suits 3 valves

PART NUMBER LS-030DESCRIPTION Convair discharge valve control sticker, suits 4 valves

Valves

Continued (AKO Pinch Valve Controls)

AKO Sleeves*

PART NUMBER M100.02xDESCRIPTION AKO 100mm White Natural Rubber food grade Sleeve

PART NUMBER M100.03XDESCRIPTION AKO 100mm Black natural rubber sleeve

*Additional sleeve materials available on request


Valves





Valves





Valves

Ball Valves, Airline

Ball Valves, Todo

PART NUMBER C058DESCRIPTION Ball Valve 1.5″

PART NUMBER T5140EDESCRIPTION TODO 4″ Ball Valve, aluminium ball & body, teflon seat, stainless steel spindle

PART NUMBER C005DESCRIPTION Ball Valve 3″

PART NUMBER C012DESCRIPTION Ball Valve 2″

PART NUMBER C018DESCRIPTION Ball Valve 2.5″

Valves


Valves

Subcategory

Subcategory










Valves


Valves

Ball Valves, Todo Spare Parts

Butterfly Valves, Bulk Tank Inc.

PART NUMBER T5060C-4407DESCRIPTION TODO stainless spindle assembly for 4″ Ball Valve

PART NUMBER T517207DESCRIPTION TODO 4″ Ball Valve, large o’ring

PART NUMBER C100-1DESCRIPTION Bulk Tank Inc 3″ Butterfly Valve, suits Table D Flange

PART NUMBER T5140BDESCRIPTION TODO machined steel flange

PART NUMBER T5274DESCRIPTION TODO white teflon seat & o’ring to suit 4″ Ball Valve

PART NUMBER C099-1DESCRIPTION Bulk Tank Inc 4″ Butterfly Valve, suits Table D Flange

PART NUMBER T5169-3DESCRIPTION TODO 4″ Ball Valve plated steel guide ring for teflon seat

PART NUMBER T5169A-1DESCRIPTION TODO aluminium seat guide ring for 4″ Ball valve

Valves


Valves





Valves





Valves

Butterfly Valves, FFB

Butterfly Valve Spares, FFB

Butterfly Valves, Sure Seal

PART NUMBER F006508DESCRIPTION FFB 3″ Butterfly Valve without handle

PART NUMBER F1011991DESCRIPTION FFB handle for butterfly valve

PART NUMBER C062DESCRIPTION Sure Seal 3″ butterfly valve

PART NUMBER C048DESCRIPTION Sure Seal 4″ 340 Model butterfly valve

PART NUMBER C063DESCRIPTION Sure Seal 4″ 890 Model butterfly valve, stainless steel disc & stem, aluminium body

PART NUMBER F006505DESCRIPTION FFB 4″ Butterfly Valve without handle

PART NUMBER F1023193DESCRIPTION FFB 4″ butterfly valve seat

PART NUMBER F002689DESCRIPTION FFB Butterfly Handle to suit 3″ & 4″ valve

Valves


Valves

Subcategory

Subcategory










Valves


Valves

Continued (Butterfly Valves, Sure Seal)

Butterfly Valve Spares, Sure Seal

PART NUMBER C046DESCRIPTION Sure Seal 5″ 340 Model butterfly valve

PART NUMBER C072DESCRIPTION Sure Seal 3″ 500 Model black butterfly valve seat

PART NUMBER C087-1DESCRIPTION Sure Seal 3″ aluminium stem sleeve for butterfly valve

PART NUMBER C043DESCRIPTION Sure Seal nylon coated disc to suit 340 Model butterfly valve

PART NUMBER C045DESCRIPTION Sure Seal 3″ butterfly valve handle

PART NUMBER C047DESCRIPTION Sure Seal bush kit for 4″ butterfly valve

Valves

PART NUMBER C065DESCRIPTION Sure Seal 4″ butterfly valve handle


Valves





Valves





Valves

Continued (Butterfly Valve Spares, Sure Seal)

Check Valves, Brass Swing Check

PART NUMBER C055DESCRIPTION Sure Seal 4″ - 500/890 black butterfly valve seat suits 340 & 500 Model

PART NUMBER C025DESCRIPTION Check valve, brass, 2.0″ KITZ

PART NUMBER C090DESCRIPTION Sure Seal 4″ 500/890 food grade white butterfly valve seat

PART NUMBER C056DESCRIPTION Sure Seal 4″ - 899 black butterfly valve seat suits Keystone valve


PART NUMBER C087DESCRIPTION Sure Seal 4″ aluminium stem sleeve for butterfly valve


PART NUMBER C051DESCRIPTION Sure Seal 5″ - black butterfly valve seat suits 500 Model

Valves


Valves

Subcategory

Subcategory










Valves


Valves

Check Valves, FFB

PART NUMBER F004642DESCRIPTION FFB 2″ Inclined Seat Spring Check Valve

PART NUMBER F004638DESCRIPTION FFB Spring for 2″ Inclined Seat Check Valve

PART NUMBER F004621DESCRIPTION FFB Inclined Seat Spring Check Valve Cap with Seal

PART NUMBER F004622DESCRIPTION FFB Seat for 2″ Inclined Seat Check Valve

Valves


Valves





Valves





Valves

PART NUMBER VA0011-1DESCRIPTION Knappco lid and poppet assembly to suit 3″ Knappco Check valve, silicon gasket, silicon poppet, spring loaded.

Valves

Check Valves, Posivent

PART NUMBER C019DESCRIPTION Posivent Valve 1⅟₂″ to suit Convair tanker

PART NUMBER C022DESCRIPTION Posivent Valve 2″ to suit Convair tanker

Check Valves, Knappco

PART NUMBER C042DESCRIPTION Flange steel 3″ suits Knappco Check Valve

PART NUMBER C044DESCRIPTION Gasket 3″ suits Knappco Check Valve

PART NUMBER VA0011DESCRIPTION Knappco 3″ Alumini-um Check valve, silicon gasket, silicon poppet, spring loaded


Valves

Subcategory

Subcategory










Valves


Valves

Valves

Pressure Relief Valves, Herose*

PART NUMBER C095DESCRIPTION Herose 1⅟₂″ brass pressure relief valve set at 175kPa

PART NUMBER C096DESCRIPTION Herose 2″ brass pressure relief valve set at 175kPa

PART NUMBER C097DESCRIPTION Herose 2″ brass pressure relief valve set at 165kPa

Pressure Relief Valves, Sure Seal*

PART NUMBER C023DESCRIPTION SureSeal Pressure Relief Valve Model RV2350 set at 175kPg (27psi) in accordance with AS/NZS1271. 2″ NPT thread

PART NUMBER C023-1DESCRIPTION SureSeal Pressure Relief Valve Model RV2350 set at 165kPa (24psi) in accordance with AS/NZS1271. 2″ NPT thread



*Please note that we can set Pressure Relief Valves at specific pressures on request


Valves





Valves





Valves

Pressure Relief Valves, Certificates

PART NUMBER PRV CERTIFICATEDESCRIPTION Convair Pressure Relief Valve Certificate for Sure Seal RV-2350 Model

PART NUMBER NATA PRV CERT.DESCRIPTION NATA Pressure Relief Valve Certificate

Valves


Valves

Subcategory

Subcategory










Valves


Valves

Valves

Sure Seal PRV Setting Parts

PART NUMBER C102-2DESCRIPTION Sure Seal spring for pressure relief valve (WHITE) 68-82kPa

PART NUMBER C103-3DESCRIPTION Sure Seal spring for pressure relief valve (GREEN) 152-158KPA

PART NUMBER C103-1DESCRIPTION Sure Seal spring for pressure relief valve (BLACK)96-103 kPa

PART NUMBER C104DESCRIPTION Sure Seal thin washer for adjusting pressure relief valve, 5kPa

PART NUMBER C103-2DESCRIPTION Sure Seal spring for pressure relief valve (ORANGE) 62-75kPa

PART NUMBER C105DESCRIPTION Sure Seal thick washer for adjusting pressure relief valve, 10kPa


Valves





Valves





Valves

Valves

Uni Joint for Remote Handle

Vacuum Relief Valves

PART NUMBER UJ001DESCRIPTION Universal Joing yoke, to suit 3/4″ shaft size 10-4-13

PART NUMBER F001475DESCRIPTION FFB Spring for 50mm anti - vacuum valve

PART NUMBER F9004583DESCRIPTION FFB Breather cap for Vacuum Relief Valve

PART NUMBER UJ002DESCRIPTION Bearing for Universal Joint

PART NUMBER F005943DESCRIPTION FFB Plunger for anti - vacuum valve

PART NUMBER F010067DESCRIPTION FFB 2″ Vacuum Relief Valve

PART NUMBER TextDESCRIPTION Text. Refer to










Blowers & Compressors

Betico PTO Drive Accessories

PART NUMBER C013DESCRIPTION Betico layshaft 600mm long Bright 1020 MS

PART NUMBER C006DESCRIPTION Betico compressor aluminium flywheel/pulley guard

PART NUMBER 102647DESCRIPTION Betico SB1-82 Compressor c/w plastic Dry type Inlet Filters and regulation kit, bareshaft

PART NUMBER SBFWDESCRIPTION Betico flywheel/pulley assembly. Refer to Betico Manual Drg. No. C04-SB1

PART NUMBER 8813741DESCRIPTION Betico SB1-82 Compressor c/w plastic Dry type Inlet Filters, bareshaft

PART NUMBER BRG-001DESCRIPTION Blue Brut Layshaft bearing


Betico Compressors

PART NUMBER SB1-70DESCRIPTION Betico SB1-70 Compressor c/w plastic Dry type Inlet Filters, bareshaft












Betico Spare Parts

PART NUMBER 4000448DESCRIPTION Betico intake manifold gasket

PART NUMBER 3722819DESCRIPTION Betico air intake manifold tube LHS. Refer to Betico Manual Drg. No.D05-SB1

PART NUMBER 4001644DESCRIPTION Betico M14 DOUTY SEAL. Betico Manual Drg. No. D05-SB1, D12-SB1


PART NUMBER 4017632DESCRIPTION Betico large clamp for rubber inlet elbow, Drawing No. D05-SB1. Refer to Betico Manual Drg. No. D05-SB1

PART NUMBER 4814806DESCRIPTION Betico rubber inlet elbow for plastic air filter housing. Refer to Betico Manual Drg. No. D05-SB1

PART NUMBER 4609958DESCRIPTION Betico M14 x 170 BOLT. Refer to Betico Manual Drg. No. D05-SB1

PART NUMBER 4000638DESCRIPTION Betico Cooling Fan Bolt. Refer to Betico Manual Drg. No. D07-SB1

PART NUMBER 4631168DESCRIPTION Betico small clamp for rubber inlet elbow, Drawing No. D05-SB1. Refer to Betico Manual Drg. No. D05-SB1

PART NUMBER 4000737DESCRIPTION Betico Cooling Fan Spring Washer. Refer to Betico Manual Drg. No. D07-SB1













PART NUMBER 4001115DESCRIPTION Betico Cooling Fan Nut. Refer to Betico Manual Drg. No. D07-SB1

PART NUMBER 4745638DESCRIPTION Betico Cooling Fan Guard (Bottom Section). Refer to Betico Manual Drg. No. D07-SB1

PART NUMBER 4000026DESCRIPTION Betico dipstick. Refer to Betico Manual Drg. No. D11-SB1

PART NUMBER 4364372DESCRIPTION Betico Cooling Fan Guard (Top Section). Refer to Betico Manual Drg. No. D07-SB1

PART NUMBER 4717637DESCRIPTION Betico crankshaft rear endcap. Refer to Betico Manual Drg. No. D10-SB1

PART NUMBER 4000539DESCRIPTION Betico suction filter gasket. Refer to Betico Manual Drg. No. D11-SB1

PART NUMBER 4621623DESCRIPTION Betico Cooling Fan Flat Washer. Refer to Betico Manual Drg. No. D07-SB1

PART NUMBER 3031906DESCRIPTION Betico SB1 cylinder stud. Refer to Betico Manual Drg. No. D11-SB1

PART NUMBER 4674754DESCRIPTION Betico sump plug. Refer to Betico Manual Drg. No. D11-SB1

Continued (Betico Spare Parts)













PART NUMBER 5951301DESCRIPTION Betico oil suction filter. Refer to Betico Manual Drg. No. D11-SB1

PART NUMBER 4001545DESCRIPTION Betico M14 x 165 BOLT outlet manifold to cylinder Head. Refer to Betico Manual Drg. No. D12-SB1

PART NUMBER 3005504DESCRIPTION Betico crankshaft bolt washer. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 3007609DESCRIPTION Betico outlet flange. Refer to Betico Manual Drg. No. D12-SB1

PART NUMBER 4001644DESCRIPTION Betico M14 douty seal. Refer to Betico Manual Drg. No. D05-SB1, D12-SB1

PART NUMBER 3024802DESCRIPTION Betico crankshaft key. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4001040DESCRIPTION Betico outlet flange gasket. Refer to Betico Manual Drg. No. D12-SB1, D23-SB1

PART NUMBER 3017509DESCRIPTION Betico SB1 outlet manifold. Refer to Betico Manual Drg. No. D12-SB1

PART NUMBER 4001230DESCRIPTION Betico main bearing (Small, rear). Refer to Betico Manual Drg. No. D08-S1















PART NUMBER 4001438DESCRIPTION Betico crankshaft oil seal (Small, rear). Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4002410DESCRIPTION Betico main bearing (Large, front). Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4049403DESCRIPTION Betico drive pin for cooling fan. Refer to Betico Manual Drg. No. D08-S1, D18-SB1

PART NUMBER 4002139DESCRIPTION Betico washer. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4070102DESCRIPTION Betico plug. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 5297705DESCRIPTION Betico SB1-82 CRANKSHAFT 41mm. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4002311DESCRIPTION Betico crankshaft oil seal (Large, front). Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4072009DESCRIPTION Betico bolt M18x2.5x45. Refer to Betico Manual Drg. No. D08-S1

PART NUMBER 4002543DESCRIPTION Betico oil pressure gauge. Refer to Betico Manual Drg. No. D13-SB1, Unloader Kit Part














PART NUMBER 4002642DESCRIPTION Betico oil pressure gauge bracket. Refer to Betico Manual Drg. No. D13-SB1, Unloader Kit Part

PART NUMBER 4035683DESCRIPTION Betico 6mm insert. Refer to Betico Manual Drg. No. D13-SB1, Unloader Kit Part. D01-RACORES-03D02-RACORES-02D03-RACORES-03D06-RACORES-02D08-RACORESD09-RACORES-01

PART NUMBER 4033191DESCRIPTION Betico nut. Refer to Betico Manual Drg. No. D13-SB1, Unloader Kit Part

PART NUMBER 4000141DESCRIPTION Betico washer M14 DIN7980. Refer to Betico Manual Drg. No. D18-SB1

PART NUMBER 4035287DESCRIPTION Betico olive. Refer to Betico Manual Drg. No. D13-SB1, Unloader Kit Part. D01-RACORES-03 D02-RACORES-02 D03-RACORES-03 D06-RACORES-02 D07-RACORES-03 D09-RACORES-01

PART NUMBER 4001990DESCRIPTION Betico bolt for cooling fan. Refer to Betico Manual Drg. No. D18-SB1














PART NUMBER 4049403DESCRIPTION Betico drive pin for cooling fan. Refer to Betico Manual Drg. No. D08-S1, D18-SB1

PART NUMBER 4000513DESCRIPTION Betico washer for oil pump retaining bolt. Refer to Betico Manual Drg. No. D22-SB1, D35-S1

PART NUMBER 4001131DESCRIPTION Betico crankcase cover plate gasket. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 5369835DESCRIPTION Betico cooling fan. Refer to Betico Manual Drg. No. D18-SB1

PART NUMBER 3657049DESCRIPTION Betico crankcase cover plate. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 4059279DESCRIPTION Betico screw. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 4023150DESCRIPTION Betico copper washer. Refer to Betico Manual Drg. No. D22-SB1, D23-SB1, Unloader Kit Part. D01-RACORES-03 D03-RACORES-03 D05-RACORES-02 D05-RACORES-02 D07-RACORES-03

PART NUMBER 4000430DESCRIPTION Betico washer. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 4628131DESCRIPTION Betico oil pressure relief valve cap. Refer to Betico Manual Drg. No. D22-SB1














PART NUMBER 4628339DESCRIPTION Betico sleeve for oil filter. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 4815704DESCRIPTION Betico compressor air filter element for plastic housing. Refer to Betico Manual Drg. No. D24-SB1

PART NUMBER 4810432DESCRIPTION Betico outlet flanged camlock adaptor, Drawing No. D23-SB1. Refer to Betico Manual Drg. No. D23-SB1

PART NUMBER 4641274DESCRIPTION Betico oil filter. Refer to Betico Manual Drg. No. D22-SB1

PART NUMBER 4813816DESCRIPTION Betico compressor plastic air filter housing. Refer to Betico Manual Drg. No. D24-SB1

PART NUMBER 4023150DESCRIPTION Betico copper washer. Refer to Betico Manual Drg. No. D22-SB1, D23-SB1, Unloader Kit Part. D01-RACORES-03 D03-RACORES-03D05-RACORES-02D05-RACORES-02D07-RACORES-03

PART NUMBER 4002493DESCRIPTION Betico air filter service indicator. Refer to Betico Manual Drg. No. D24-SB1

PART NUMBER 4814608DESCRIPTION Betico mounting bracket for plastic air filter housing. Refer to Betico Manual Drg. No. D24-SB1

PART NUMBER 4001917DESCRIPTION Betico Piston. Refer to Betico Manual Drg. No. D10-S1














PART NUMBER 4002634DESCRIPTION Betico piston ring - oil. Refer to Betico Manual Drg. No. D10-S1

PART NUMBER 4000125DESCRIPTION Betico nut - cylinder. Refer to Betico Manual Drg. No. D10-SBD, D30-S1

PART NUMBER 4002436DESCRIPTION Betico gudgeon pin. Refer to Betico Manual Drg. No. D10-S1

PART NUMBER 4002535DESCRIPTION Betico internal circlip 40mm for gudgeon pin. Refer to Betico Manual Drg. No. D10-S1

PART NUMBER 4002733DESCRIPTION Betico piston ring - compression. Refer to Betico Manual Drg. No. D10-S1

PART NUMBER 3015909DESCRIPTION Betico cylinder. Refer to Betico Manual Drg. No. D10-SBD, D30-S1

PART NUMBER 4714998DESCRIPTION Betico o ring. Refer to Betico Manual Drg. No. D10-SBD, D30-S1

PART NUMBER 4715094DESCRIPTION Betico O Ring endless for cylinder. Refer to Betico Manual Drg. No. D10-SBD, D30-S1

PART NUMBER 4000216DESCRIPTION Betico o ring 1m length (Cylinder). Refer to Betico Manual Drg. No. D30-S1














PART NUMBER 4715391DESCRIPTION Betico o ring for intake & outlet manifolds. Refer to Betico Manual Drg. No. D10-SBD, D30-S1

PART NUMBER 3033100DESCRIPTION Betico cylinder head retaining stud. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 4002345DESCRIPTION Betico locknut for valve retainer adjustment stud. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 3597302DESCRIPTION Betico valve retainer clamp, standard. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 4002147DESCRIPTION Betico nut for cylinder head retaining stud. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 3035501DESCRIPTION Betico valve retainer, outlet. Refer to Betico Manual Drg. No. D14-S1

PART NUMBER 3023408DESCRIPTION Betico Cylinder Head. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 4002246DESCRIPTION Betico valve retainer adjustment stud. Refer to Betico Manual Drg. No. D27-S1

PART NUMBER 4001743DESCRIPTION Betico valve retainer o ring. Refer to Betico Manual Drg. No. D14-S1, D16-S1, D22-S1, Unloader Kit Part














PART NUMBER 4001842DESCRIPTION Betico copper washer for inlet & outlet valves. Refer to Betico Manual Drg. No. D14-S1, D16-S1, D22-S1

PART NUMBER 3068502DESCRIPTION Betico valve top, outlet. Refer to Betico Manual Drg. No. D15-S1

PART NUMBER 5297101DESCRIPTION Betico inlet & outlet valve disk set, thin. Refer to Betico Manual Drg. No. D15-S1, D17-S1, D25-S1

PART NUMBER 5900605DESCRIPTION Betico outlet valve, complete. Refer to Betico Manual Drg. No. D14-S1, D15-S1

PART NUMBER 4346221DESCRIPTION Betico inlet & outlet valve bolt. Refer to Betico Manual Drg. No. D15-S1, D17-S1

PART NUMBER 5297200DESCRIPTION Betico inlet & outlet valve disk set, thick. Refer to Betico Manual Drg. No. D15-S1, D17-S1, D25-S1

PART NUMBER 3022202DESCRIPTION Betico valve body, outlet. Refer to Betico Manual Drg. No. D15-S1

PART NUMBER 4346817DESCRIPTION Betico inlet & outlet valve nut. Refer to Betico Manual Drg. No. D15-S1, D17-S1

PART NUMBER 5900605DESCRIPTION Betico outlet valve, complete. Refer to Betico Manual Drg. No. D14-S1, D15-S1














PART NUMBER 5956979DESCRIPTION Betico inlet & outlet valve spring. Refer to Betico Manual Drg. No. D15-S1, D17-S1, D25-S1, D18-S1


PART NUMBER 3067900DESCRIPTION Betico valve top, inlet. Refer to Betico Manual Drg. No. D17-S1, D25-S1

PART NUMBER 3035204DESCRIPTION Betico valve retainer, inlet. Refer to Betico Manual Drg. No. D16-S1, D28-S1

PART NUMBER 5906602DESCRIPTION Betico inlet valve, complete. Refer to Betico Manual Drg. No. D16-S1, D17-S1

PART NUMBER 5906602DESCRIPTION Betico inlet valve, complete. Refer to Betico Manual Drg. No. D16-S1, D17-S1


PART NUMBER 3021501DESCRIPTION Betico valve body, inlet. Refer to Betico Manual Drg. No. D17-S1, D25-S1

PART NUMBER 5956979DESCRIPTION Betico inlet & outlet valve spring. Refer to Betico Manual Drg. No. D15-S1, D17-S1, D25-S1, D18-S1






PART NUMBER 4346817DESCRIPTION Betico inlet & outlet valve nut. Refer to Betico Manual Drg. No. D15-S1, D17-S1


PART NUMBER 4346221DESCRIPTION Betico inlet & outlet valve bolt. Refer to Betico Manual Drg. No. D15-S1, D17-S1

PART NUMBER 4001669DESCRIPTION Betico O RING for unloader kit piston. Refer to Betico Manual Drg. No. D22-S1, Unloader kit part

PART NUMBER 3064907DESCRIPTION Betico valve retainer clamp for unloader kit. Refer toBetico Manual Drg. No. D31-S1, Unloader Kit part

PART NUMBER 4001867DESCRIPTION Betico unloader kit valve piston. Refer to Betico Manual Drg. No. D22-S1, Unloader kit part

PART NUMBER 3034801DESCRIPTION Betico valve retainer, inlet for unloader kit. Refer to Betico Manual Drg. No. D22-S1, Unloader kit part

PART NUMBER 4001966DESCRIPTION Betico O RING for unloader kit valve retainer. Refer to Betico Manual Drg. No. D22-S1, Unloader kit part







PART NUMBER 4000091DESCRIPTION Betico unloader kit inlet valve stud. Refer to Betico Manual Drg. No. D25-S1, Unloader Kit Part

PART NUMBER 4001222DESCRIPTION Betico unloader kit inlet valve nut. Refer to Betico Manual Drg. No. D25-S1, Unloader Kit Part

PART NUMBER 4002980DESCRIPTION Betico unloader kit valve spring. Refer to Betico Manual Drg. No. D25-S1, Unloader Kit Part

PART NUMBER 4002782DESCRIPTION Betico unloader kit valve spider. Refer to Betico Manual Drg. No. D25-S1, Unloader Kit Part

PART NUMBER 5956979DESCRIPTION Betico inlet & outlet valve spring. Refer to Betico Manual Drg. No. D15-S1, D17-S1, D25-S1

PART NUMBER 4002881DESCRIPTION Betico unloader kit valve spider hub retaining nut. Refer to Betico Manual Drg. No. D25-S1, Unloader Kit Part







PART NUMBER 3072900DESCRIPTION Betico conrod bolt. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 4001925DESCRIPTION Betico NUT for Conrod bolt. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 4002014DESCRIPTION Betico big end bearing shells (pair), standard size. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 4622845DESCRIPTION Betico big end bearing shells (pair), 1mm oversize. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 4002022DESCRIPTION Betico conrod washer. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 3013508DESCRIPTION Betico gudgeon bearing. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 4622746DESCRIPTION Betico big end bearing shells (pair), 0.5mm oversize. Refer to Betico Manual Drg. No. D18-S1

PART NUMBER 5951400DESCRIPTION Betico Con Rod, complete. Refer to Betico Manual Drg. No. D18-S1





PART NUMBER 4628537DESCRIPTION Betico oil pump gasket. Refer to Betico Manual Drg. No. D35-S1

PART NUMBER 5799023DESCRIPTION Betico new bi-direc-tional oil pump, Drawing No. D35-S1. Refer to Betico Manual Drg. No. D35-S1

PART NUMBER 4000513DESCRIPTION Betico washer for oil pump retaining bolt. Refer to Betico Manual Drg. No. D22-SB1, D35-S1

PART NUMBER 3053603DESCRIPTION Betico oil filler cap. Refer to Betico Manual Drg. No. D23-S1

PART NUMBER 5950907DESCRIPTION Betico oil filler cap vent assembly. Refer to Betico Manual Drg. No. D23-S1

PART NUMBER 3098608DESCRIPTION Betico oil filler body. Refer to Betico Manual Drg. No. D23-S1

PART NUMBER 5957332DESCRIPTION Betico oil filler strainer. Refer to Betico Manual Drg. No. D23-S1

PART NUMBER 4020750DESCRIPTION Betico BOLT M6 x 25. Refer to Betico Manual Drg. No. D23-S1

PART NUMBER 3038877DESCRIPTION Betico unloader kit pilot valve bracket. Unloader Kit Part





PART NUMBER 3060764DESCRIPTION Betico single regulator screw. Unloader Kit Part

PART NUMBER 4033084DESCRIPTION Betico reducing bush for Unloader kit. Unloader Kit Part

PART NUMBER 4036772DESCRIPTION Betico single swivelling connector (Unloader Kit). Unloader Kit Part. Refer to Betico Manual D01-RACORES-03 D03-RACORES-03 D06-RACORES-02 D07-RACORES-03

PART NUMBER 4037333DESCRIPTION Betico double swivelling connector for unloader kit. Unloader Kit Part

PART NUMBER 4037622DESCRIPTION Betico nylon tube, for oil pressure line & unloader kit. Unloader Kit Part. Refer to Betico Manual D01-RACORES-03 D02-RACORES-02 D03-RACORES-03 D06-RACORES-02 D07-RACORES-03 D08-RACORES D09-RACORES-01

PART NUMBER 4037838DESCRIPTION Betico double regulator screw (Unloader kit). Unloader Kit Part. Refer to Betico Manual D03-RACORES-03 D06-RACORES-02 D07-RACORES-03





PART NUMBER 4059360DESCRIPTION Betico locknut for unloader kit. Unloader Kit Part

PART NUMBER 4447003DESCRIPTION Betico LOCKNUT. Unloader Kit Part. Refer to Betico Manual D01-RACORES-03 D02-RACORES-02 D03-RACORES-03 D06-RACORES-02 D07-RACORES-03 D09-RACORES-01

PART NUMBER 4668707DESCRIPTION Betico pilot valve for unloader kit. Unloader Kit Part

PART NUMBER 4691253DESCRIPTION Betico fitting - oil pressure line. Unloader Kit Part. Refer to Betico Manual D01-RACORES-03

PART NUMBER 4692533DESCRIPTION Betico Washer Copper (Unloader kit). Unloader Kit Part. Refer to Betico Manual D02-RACORES-02 D03-RACORES-03 D04-RACORES-02 D07-RACORES-03 D08-RACORES

PART NUMBER 4729533DESCRIPTION Reinforced Rubber Elbow. Unloader Kit Part





PART NUMBER FIT006DESCRIPTION Betico 6.0mm Push In To 1/8″ Thread Elbow Swivel (Unloader Kit). Unloader Kit Part

PART NUMBER FIT007DESCRIPTION Betico 6.0mm Push In To 1/8″ Thread Tee Adaptor (Unloader Kit). Unloader Kit Part





PART NUMBER UNLOADER KITDESCRIPTION Betico unloader kit complete. Convair Part # Description Qty

3034801 Valve Retainer - Inlet (Unloader Kit) 43038877 Bracket (Unloader Kit) 13064907 Valve Retainer Clamp Cover 24000091 Stud 44001222 Nut (Unloader Kit) 44001669 O Ring (Unloader Kit) 84001743 Sealing Ring 44001867 Valve Piston (Unloader Kit) 44001966 O Ring (Unloader Kit) 44002543 Oil Pressure Gauge 14002642 Oil P. Gauge Bracket 14002782 Spider Hub (Unloader Kit) 44002881 Spring Top (Unloader Kit) 44002980 Spring (Unloader Kit) 44023150 Copper Washer (Unloader Kit) 14033084 Reducing Bush (Unloader Kit) 14033191 Nut 14035287 Olive 14035683 6mm Insert 24037622 Nylon Tube 44059360 Locknut (Unloader Kit) 14668707 Pilot Valve 14691253 Fitting - Oil Pressure Line 14692533 Washer Copper (Unloader Kit) 14729533 Reinforced Rubber Elbow 2Fit006 6.0Mm Push In To 1/8” Thread Elbow Swivel 1Fit007 6.0Mm Push In To 1/8” Thread Tee Adaptor 4





PART NUMBER 5297549DESCRIPTION Betico SB1-70 Crankshaft 35mm. Refer to Betico Manual Drg. No. C01-SB1

PART NUMBER 3722918DESCRIPTION Betico intake manifold tube RHS. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 4449918DESCRIPTION Betico air filter element for 4615719 AF4058. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 5299107DESCRIPTION Betico SB2 crankshaft 52.5mm. Refer to Betico Manual Drg. No. C01-SB1

PART NUMBER 4004465DESCRIPTION Betico 102-108mm clamp for rubber intake elbow 3722710. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 4615179DESCRIPTION Betico metal air intake filter complete. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 3722710DESCRIPTION Betico rubber intake elbow, standard. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 4017152DESCRIPTION Betico air filter intake hood for 4615719. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 4634816DESCRIPTION Betico air filter safety element for 4615179 AF1842. Refer to Betico Manual Drg. No. C02-SB1





PART NUMBER 4722314DESCRIPTION Betico Filter Support Bracket. Refer to Betico Manual Drg. No. C02-SB1

PART NUMBER 4001214DESCRIPTION Betico O Rings for old type oil pump. Refer to Betico Manual Drg. No. C05-SB1

PART NUMBER 4028605DESCRIPTION Betico pressure relief valve for old type oil pump. Refer to Betico Manual Drg. No. C05-SB1

PART NUMBER 3032003DESCRIPTION Betico Stud Cylinder SB2. Refer to Betico Manual Drg. No. C03-SB1, C04-SB1

PART NUMBER 4001412DESCRIPTION Betico pressure relief spring for old type oil pump. Refer to Betico Manual Drg. No. C05-SB1

PART NUMBER 5900001DESCRIPTION Betico old type RHS OIL PUMP. Refer to Betico Manual Drg. No. C05-SB1

PART NUMBER 3617399DESCRIPTION Betico cylinder spacer for SB2 compressor. Refer to Betico Manual Drg. No. C04-SB1

PART NUMBER 4005702DESCRIPTION Betico pressure relief spacer for old type oil pump. Refer to Betico Manual Drg. No. C05-SB1

PART NUMBER 5949909DESCRIPTION Betico old type LHS Oil Pump. Refer to Betico Manual Drg. No. C05-SB1





PART NUMBER 5313460DESCRIPTION Betico RHS Oil Pump. Refer to Betico Manual Drg. No. C06-SB1

PART NUMBER 4715490DESCRIPTION Betico SB3 o ring for outlet manifold. Refer to Betico Manual Drg. No D04-SB3

PART NUMBER 3109603DESCRIPTION Betico SB3 Lock Nut (2 Required). Refer to Betico Manual Drg. No D13-SB3

PART NUMBER 5313569DESCRIPTION Betico LHS OIL PUMP. Refer to Betico Manual Drg. No. C06-SB1

PART NUMBER 4007088DESCRIPTION Betico SB3 large crankshaft oil seal. Refer to Betico Manual Drg. No D10-SB3

PART NUMBER 4006882DESCRIPTION Betico SB3 crankshaft main bearing. Refer to Betico Manual Drg. No D13-SB3

PART NUMBER 4001891DESCRIPTION Betico SB3 M14 Nut For Outlet Manifold Bolt. Refer to Betico Manual Drg. No D04-SB3

PART NUMBER 4010256DESCRIPTION Betico SB3 input crankcase cover gasket. Refer to Betico Manual Drg. No D10-SB3

PART NUMBER 4006981DESCRIPTION Betico SB3 circlip. Refer to Betico Manual Drg. No D13-SB3






PART NUMBER 5037846DESCRIPTION Betico SB3 Crankshaft E-41. Refer to Betico Manual Drg. No. D13-SB3

PART NUMBER 4007286DESCRIPTION Betico SB3 circlip. Refer to Betico Manual Drg. No D13-SB3




CVS Siloking Spare Parts


PART NUMBER CVS002DESCRIPTION CVS Siloking Pressure Relief valve set at 2.5 bar.

PART NUMBER CVS003DESCRIPTION RIWO Outlet box assembly for silencer.

PART NUMBER CVS005DESCRIPTION RIWO Silencer check valve gasket.

PART NUMBER CVS006DESCRIPTION CVS Siloking 1100 Oil Filter.

PART NUMBER CVS007DESCRIPTION CVS Siloking 90° Inlet elbow.

PART NUMBER CVS008DESCRIPTION CVS Siloking Gasket Inlet/Outlet

CVS Siloking Screw Compressors

PART NUMBER 910200DESCRIPTION CVS Siloking 1100 Screw Compressor, Bareshaft.

PART NUMBER 910211DESCRIPTION CVS Siloking 1100 Screw Compressor inc. L/H Orientated 2:1 Step Up Gearbox ACW Rotation, bareshaft.



Continued (CVS Siloking Spare Parts)


PART NUMBER CVS012DESCRIPTION CVS Siloking Remote oil cooler accessories kit.

PART NUMBER LC-021DESCRIPTION Bracket stainless steel for 64mm oil pressure gauge and air filter service indicator.

PART NUMBER C134DESCRIPTION Oil Line fittings to remote mount compressor oil pressure gauge.

PART NUMBER CVS009DESCRIPTION CVS Siloking Absorptive Outlet silencer including check valve, flange and gaskets.

PART NUMBER CVS010DESCRIPTION Overhaul kit for CVS SiloKing 1100 Screw Compressor Bareshaft machine.

PART NUMBER CVS011DESCRIPTION Overhaul kit for CVS Siloking Screw Compressor CCW Gearbox.



GD Bulkline Spare Parts


PART NUMBER SBulkline10DESCRIPTION Bulkline Dipstick.

PART NUMBER SBulkline22DESCRIPTION Bulkline Oil seal for gearbox input shaft TW46104200.

PART NUMBER SBulkline11DESCRIPTION Bulkline steel outlet flange.

PART NUMBER SBulkline26DESCRIPTION Bulkline Alloy adaptor - Threaded both ends (For Silencer).

PART NUMBER SBulkline13DESCRIPTION Bulkline gearbox breather.

PART NUMBER SBulkline27DESCRIPTION Bulkline Oil pressure gauge 0-6 bar TW43012800.

GD Bulkline Compressors

PART NUMBER 91588000DESCRIPTION Bulkline 1000 Screw Compressor - bare shaft.

PART NUMBER 91589300DESCRIPTION Bulkline 1000 Screw Compressor inc. L/H Orientated CW gearbox.

PART NUMBER 91589400DESCRIPTION Bulkline 1000 Screw Compressor inc. L/H Orientated ACW gearbox.



Continued (GD Bulkline Spare Parts)


PART NUMBER SBulkline45DESCRIPTION Bulkline re-active Silencer Kit inc. swing check valve 8420002694-2.

PART NUMBER SBulkline6DESCRIPTION Bulkline Oil Filter TW43299100.

PART NUMBER SBulkline46DESCRIPTION Bulkline 1000 Compressor inc gearbox Overhaul kit TWSP915894-1.

PART NUMBER SBulkline7DESCRIPTION Bulkline flange Gasket TW46565300.

PART NUMBER C134DESCRIPTION Oil Line fittings to remote mount compressor oil pressure gauge.

PART NUMBER SBulkline9DESCRIPTION Bulkline 1000 bareshaft Compressor Overhaul kit TWSP915870-1.

PART NUMBER SBulkline3DESCRIPTION Bulkline Intake Flange/Elbow TWZ91584600.

PART NUMBER SBulkline4DESCRIPTION Bulkline Pressure Relief Valve 1.5″ @ 2.2 bar 7655447000-2.

PART NUMBER SBulkline44DESCRIPTION Bulkline large O ring for G/Box to Compressor.



Gardner Denver Cycloblowers

Cycloblower Spare Parts


PART NUMBER STFTN-007DESCRIPTION Nipple 3″ NPT 150mm Long Threaded One End Heavy Wall.

PART NUMBER GDB-12LDESCRIPTION Gardner Denver Cycloblower Model T5CDL12L, bareshaft.

PART NUMBER GDB-12L7DESCRIPTION Gardner Denver Cycloblower Model T5C-DL12L7, bareshaft.


PART NUMBER GDB-9L7DESCRIPTION Gardner Denver Cycloblower Model T5CDL9L7, bareshaft.

PART NUMBER STFTN-008DESCRIPTION Nipple 4″ NPT 150mm Long Threaded One End Heavy Wall.


PART NUMBER GD106DESCRIPTION Gardner Denver Cycloblower 200CTH6008 - Gear Set for T5CDL9.



Continued (Cycloblower Spare Parts)


PART NUMBER GD107DESCRIPTION Gardner Denver Cycloblower 201CTH6008 - Gear Set for T5CDL12 & T5CDL13.

PART NUMBER GD114DESCRIPTION Gardner Denver Cycloblower 8500148 - Bearing Spacer.

PART NUMBER GD117DESCRIPTION Gardner Denver Cycloblower 8500030 - Cover Gasket.

PART NUMBER GD110DESCRIPTION Gardner Denver Cycloblower 8500151 - End Cover.

PART NUMBER GD115DESCRIPTION Gardner Denver Cycloblower 8501081 - Rotor Shaft Seal.

PART NUMBER GD118DESCRIPTION Gardner Denver Cycloblower 8500029 - Housing Shim Set.

PART NUMBER GD112DESCRIPTION Gardner Denver Cycloblower 8500665 - Power Pack End Cover.

PART NUMBER GD116DESCRIPTION Gardner Denver Cycloblower 8500023 - Housing Shim.

PART NUMBER GD119DESCRIPTION Gardner Denver Cycloblower 8501269 - Shaft Shim Set.





PART NUMBER GD120DESCRIPTION Gardner Denver Cycloblower 40E37 - Lube Relief Fitting.

PART NUMBER GD123DESCRIPTION Gardner Denver Cycloblower 60DD513 - Oil Bearing Seal.

PART NUMBER GD126DESCRIPTION Gardner Denver Cycloblower 8500406 - Ball Bearing.

PART NUMBER GD121DESCRIPTION Gardner Denver Cycloblower 8500163 - Cover End Gasket.

PART NUMBER GD124DESCRIPTION Gardner Denver Cycloblower 8500165 - Ball Bearing.

PART NUMBER GD127DESCRIPTION Gardner Denver Cycloblower 8501275 Replaced by 40P45 - Oil Level Gauge.

PART NUMBER GD122DESCRIPTION Gardner Denver Cycloblower 8501240 - Oil Shaft Seal.

PART NUMBER GD125DESCRIPTION Gardner Denver Cycloblower 8501200 - Roller Bearing.

PART NUMBER GD128DESCRIPTION Gardner Denver Cycloblower 5L223 - Breather.





PART NUMBER GD129DESCRIPTION Gardner Denver Cycloblower 200CTH6003 Replaced by 5L255 - Breather Vent.

PART NUMBER GD132DESCRIPTION Gardner Denver Cycloblower 95W17 - Washer Plain.

PART NUMBER GD136DESCRIPTION Gardner Denver Cycloblower 62M83 - Dowell Pin.

PART NUMBER GD130DESCRIPTION Gardner Denver Cycloblower 95U3 - Washer Plain.

PART NUMBER GD134DESCRIPTION Gardner Denver Cycloblower 64B16 - 3″ NPT Plug.

PART NUMBER GD143DESCRIPTION Gardner Denver Cycloblower 50Z9 - Locknut.

PART NUMBER GD131DESCRIPTION Gardner Denver Cycloblower 75LM12N - Socket Head Screw.

PART NUMBER GD135DESCRIPTION Gardner Denver Cycloblower 64B10 - 4″ NPT Plug.

PART NUMBER GD144DESCRIPTION Gardner Denver Cycloblower 95W25 - Lockwasher.





PART NUMBER GD146DESCRIPTION Gardner Denver Cycloblower 8501246 - Fusible Plug.

PART NUMBER GD149DESCRIPTION Gardner Denver Cycloblower 8504125 - Timing Pin.

PART NUMBER GD150DESCRIPTION Gardner Denver Cycloblower 8504126 - Timing Bush.

PART NUMBER GD155DESCRIPTION Gardner Denver Cycloblower 8507529 - OVERHAUL KIT. Description Qty Convair Part # Gardner Denver Part #

SEAL--ROTOR SHAFT 4 GD115 8501081SHIM--HOUSING 1 GD116 8500023SHIM--HOUSING SET 1 GD118 8500029SHIM--SHAFT SET 1 GD119 8501269GASKET--COVER 1 GD117 8500030GASKET--COVER 3 GD121 8500163SEAL--OIL 2 GD122 8501240SEAL--OIL 4 GD123 60DD513BEARING--BALL 1 GD124 8500165BEARING--CYLINDRICAL ROLLER 1 GD125 8501200BEARING--ANGULAR CONTACT 4 GD126 8500406WASHER--PLAIN 5 - 95W48LOCKNUT, BEARING 3 GD143 50Z9LOCKWASHER, BEARING 3 GD144 95W25PLUG--FUSIBLE 1 GD146 8501246SPACER--BEARING 4 GD114 8500148CAPSCREW 8 GD175 75P6NCAPSCREW 8 GD176 75P57NWASHER--PLAIN 4 - 95U3

IMPORTANT: For spare parts requirement in remote areas, export or where more than one unit is operating, a spare gear set is recommended.

For Models T5CDL9L, T5CDL9L7, T5CDL12L9 & T5CDL13L9 order kit part number 200CTH6008 which consists of one gear and one pinion.

For Models T5CDL12L, T5CDL13L & T5CDL13L7 order kit part number 201CTH6008 which consists of one gear and one pinion.

NOTE: Overhaul kit is recommended for spare parts and/or scheduled maintenance or overhaul requirements.





PART NUMBER GD160DESCRIPTION Gardner Denver Cycloblower Econograph Outlet Gasket (Suits T5CDL9 & T5CDL12) 85mm ID. 130mm OD.

PART NUMBER GD158DESCRIPTION Gardner Denver Cycloblower 8501103 End Shaft Cover.

PART NUMBER GD161DESCRIPTION Gardner Denver Cycloblower Econograph Outlet Gasket (Suits T5CDL13) 110mm ID. 180mm OD.

PART NUMBER GD159DESCRIPTION Gardner Denver Cycloblower 64BJ4 Magnetic Sump Plug.

PART NUMBER GD162DESCRIPTION Gardner Denver Cycloblower 40E9 - Fitting - Lube.

PART NUMBER GD163DESCRIPTION Gardner Denver Cycloblower 60DD587 - Seal - Oil. Suits Model T5CDL12L72.

PART NUMBER GD164DESCRIPTION Gardner Denver Cycloblower 12BA139 - Bearing. Suits Model T5CDL12L72.

PART NUMBER GD165DESCRIPTION Gardner Denver Cycloblower 25BC255 - Ring O. Suits Model T5CDL12L72.

PART NUMBER GD166DESCRIPTION Gardner Denver Cycloblower VP1004578 - Breather. Suits Model T5CDL12L72.

on page 106-109 on page 106-109 on page 106-109

on page 106-109





PART NUMBER GD172DESCRIPTION Gardner Denver Cycloblower aluminium Silencer - Reactive.

PART NUMBER GD175DESCRIPTION Gardner Denver Cycloblower 75P6N Capscrew.

PART NUMBER GD173DESCRIPTION Gardner Denver Cycloblower Camlock Adaptor 3″ Male for Cyclosilencer.

PART NUMBER GD174DESCRIPTION Gardner Denver Cycloblower Camlock Adaptor 3″ Female for Cyclosilencer.

PART NUMBER GD169DESCRIPTION Gardner Denver Cycloblower 40E37 Fitting - Lubrication.

PART NUMBER GD167DESCRIPTION Gardner Denver Cycloblower 301CTH199 - Seal - Oil. Suits Model T5CDL12L72.

PART NUMBER GD170DESCRIPTION Gardner Denver Cycloblower 2631695 O-Ring. Suits Model T5CDL12L72.

PART NUMBER GD168DESCRIPTION Gardner Denver Cycloblower 64BJ4 Pipe Plug - Magnetic.

PART NUMBER GD171DESCRIPTION Gardner Denver Cycloblower 25BC255 Bearing, roller - self aligning. Suits Model T5CDL12L72.

on page 106-109

on page 106-109

on page 106-109

on page 106-109





PART NUMBER GD181DESCRIPTION Gardner Denver Cycloblower 655ED050 - Screw 3/8-16UNC x 1.25 LG.

PART NUMBER GD178DESCRIPTION Gardner Denver Cycloblower 655ED040 - Screw 3/8-16UNC x 1.00 LG.

PART NUMBER GD176DESCRIPTION Gardner Denver Cycloblower 75P57N Capscrew.

PART NUMBER GD179DESCRIPTION Gardner Denver Cycloblower 75G17 - Screw-Machine 8-32 x 1/4 Steel.

PART NUMBER GD182DESCRIPTION Gardner Denver Cycloblower, reactive. Stainless steel silencer

PART NUMBER GD177DESCRIPTION Gardner Denver Cycloblower 8500109, Shaft key, 3/8 x 2 ROE.

PART NUMBER GD180DESCRIPTION Gardner Denver Cycloblower 95B3 - Washer-Lock 3/8 Helical Spring.



Gardner Denver Hydrapak Oil Coolers

Gardner Denver Hydrapak Spare Parts

CentaFlex Coupling


PART NUMBER GDH-MH3DESCRIPTION Gardner Denver MH3 Hydrapak, 150 lpm, 3500 psi, 2″ NPT Suction Port.

PART NUMBER C101DESCRIPTION Centaflex coupling element - Size 30.

PART NUMBER GDH-MH5DESCRIPTION Gardner Denver MH5-P Hydrapak Oil Cooler, 3000psi, 2″ NPT.

PART NUMBER C101-1DESCRIPTION Cap Screws (Suits size 30 Centa Coupling).

PART NUMBER GDH001DESCRIPTION Gardner Denver Hydrapak 306000206 - Oil Filter for MH3 Cooler.

PART NUMBER C101-2DESCRIPTION Stud set to suit size 30 Centa Coupling.



F110 Tyre Coupling

Continued (CentaFlex Coupling)


PART NUMBER CFA-030-3-S-10DESCRIPTION Centaflex coupling to suit VM/GD Cycloblower inc. flywheel, studs, 30 element, bolts & hub machined to suit 1 5/8″ Shaft 3/8″ Key, 2 x grubscrews.

PART NUMBER F110-BDESCRIPTION Fenner B flange for F110 tyre coupling.

PART NUMBER F110-TL2DESCRIPTION Fenner 3020 Taperlock Bush To Suit 1.75″ Shaft (Suits VM Engine Stubshaft).

PART NUMBER CFA-030-3-S-8DESCRIPTION Centa coupling to suit Hatz 4L41C engine with SAE8 Flywheel and Compressor with 38mm Keyed shaft - Includes machining.

PART NUMBER F110-HDESCRIPTION Fenner H flange for F110 tyre coupling.

PART NUMBER F110-TYREDESCRIPTION Fenner F110 Fras rubber tyre.

PART NUMBER F110-TLDESCRIPTION Fenner 3020 Taperlock Bush To Suit 48mm Shaft (Hatz).



Companion Flanges

Donaldson Air Filters & Accessories


PART NUMBER C068-1DESCRIPTION Companion flange for Gardner Denver Cycloblower, bore dia 1 5/8″.

PART NUMBER AF-026DESCRIPTION Donaldson Powercore air filter assembly - Complete PSD100031.

PART NUMBER AF-019DESCRIPTION 4″ 90° rubber elbow for Powercore air cleaner.

PART NUMBER C068-2DESCRIPTION Companion flange for layshaft, bore dia 1⅟₂″.

PART NUMBER AF-024DESCRIPTION Air filter element for Donaldson Powercore air cleaner.

PART NUMBER AF-029DESCRIPTION 4″ Rubber hump Joiner for Powercore air cleaner.

PART NUMBER C068-3DESCRIPTION Companion flange for screw compressor gearbox, bore, 40.01 mm dia.

PART NUMBER AF-025DESCRIPTION Air filter safety element for Donaldson Powercore air cleaner

PART NUMBER AF-031DESCRIPTION 6-5″ rubber elbow for Powercore air cleaner



Continued (Donaldson Air Filters & Accessories)


PART NUMBER AF-027DESCRIPTION Clamp 6″ for Power-core air filter intake elbow

PART NUMBER AF-032DESCRIPTION 5-4″ steel concentric steel reducer for Powercore air cleaner.

PART NUMBER STFTEX-015DESCRIPTION 4″ Light Gauge Pipe 45 Deg Elbow.

PART NUMBER AF-028DESCRIPTION Clamp 5″ for Power-core air filter intake elbow.

PART NUMBER STFTEX-009DESCRIPTION 4″ Light Gauge 90 Deg Elbow.

PART NUMBER C042-1DESCRIPTION 150mm flange, 102mm ID, suits 4″ light gauge exhaust pipe.

PART NUMBER AF-030DESCRIPTION Clamp 4″ for Power-core air filter intake straight/elbow.

PART NUMBER STFTEX-010DESCRIPTION 4″ Light Gauge Pipe.

PART NUMBER C042-2DESCRIPTION 150mm flange, 115mm ID, suits 4″ steel pipe.



Continued (Donaldson Air Filters & Accessories)


PART NUMBER C044-1DESCRIPTION 4″ Flange Gasket.

PART NUMBER LC-021DESCRIPTION Bracket stainless steel for 64mm oil pressure gauge and air filter service indicator.

PART NUMBER AF-018DESCRIPTION Air filter element for Donaldson FHG14-5 14″ Air cleaner P18-2046

PART NUMBER AF-033DESCRIPTION Inlet Restriction Service Indicator KIT for Powercore air cleaner.

PART NUMBER C041-3DESCRIPTION Mounting Bracket to suit Powercore Air Cleaner.

PART NUMBER LC-020DESCRIPTION Bracket, stainless steel for air filter service indicator

PART NUMBER AF-017DESCRIPTION Air filter element for Donaldson FHG12-5 12″ Air cleaner P182034.




PART NUMBER C108DESCRIPTION M140 Mackay Flanged Isolator mount & oil shield.

PART NUMBER C109DESCRIPTION Heavy Duty Isolation mount M2200 - 80 DURO.

PART NUMBER C109HDDESCRIPTION Extreme Offroad Isolation Mount K6990-50 M20.

Fuel Tanks

Isolation Mounts

PART NUMBER FT-001DESCRIPTION Highgate 50L aluminium fuel tank. 336mm dia. 600mm long with vented fuel cap.

PART NUMBER FT-002DESCRIPTION Highgate 100L aluminium fuel tank. 336mm dia. 1185mm long with vented fuel cap and Mechanical Fuel Gauge.



Lubricants

Mounting Brackets, PTO Drive


PART NUMBER LU-006DESCRIPTION Castrol GTX2 15W40 oil, 5 litre bottle. Suits Betico compressors fitted with oil filter.

PART NUMBER LU-005DESCRIPTION Mobil XHP222 Grease for Gardner Denver Cycloblower, 450 Gram Tube. Suits GD Cycloblowers.

PART NUMBER C041DESCRIPTION Gardner Denver Cycloblower PTO Drive mounting bracket.

PART NUMBER LU-004DESCRIPTION Mobil 1 5W-50 Synthetic Oil, 5 litre bottle. Suits CVS Siloking & GD Bulkline compressors.

PART NUMBER C041-1DESCRIPTION Bulkline 1000 PTO Drive mounting bracket, standard.

PART NUMBER LU-003DESCRIPTION Mobil SHC 630 Synthetic Gear Oil, per litre. Suits GD Cycloblowers.

PART NUMBER C041-2DESCRIPTION CVS Siloking 1100 PTO Drive mounting bracket, standard.



Continued (Mounting Brackets, PTO Drive)


PART NUMBER C041-4DESCRIPTION CVS Siloking 1100 PTO Drive offset mounting bracket, suits Mack M Drive chassis.

PTO, Chelsea 880 PTO, Muncie 150%

PART NUMBER PTO-004-1DESCRIPTION CHELSEA 880XRAHX-V3XV PTO and mounting kit only (Control kit not included). Suits Eaton Roadranger transmissions 160% step up (subject to gearbox model).

PART NUMBER PTO-FUL050K.DADESCRIPTION MUNCIE Heavy Duty PTO inc. mounting kit to suit Eaton Roadranger transmission 150% stepup (subject to gearbox model).

PTO, Muncie 195%

PART NUMBER PTO-FUL052K.DADESCRIPTION MUNCIE Heavy Duty PTO inc. mounting kit to suit Eaton Roadranger transmission 195% stepup (subject to gearbox model).

PTO, Muncie PTO Seal Kit

PART NUMBER PTO-FULSEALKITDESCRIPTION Muncie PTO seal kit.

PTO, 12V double acting control kit

PTO, 24V double acting control kit

PART NUMBER PTO-EAC011DA-12VDESCRIPTION PTO CONTROL KIT 12V. Double acting inc. weather resistent box fitted with hour meter, wiring loom, PTO switch and pneumatic hold back valve.(INCLUDES: WLEAC001, 511239, AIR005 & 594402)

PART NUMBER PTO-EAC011DA-24VDESCRIPTION PTO CONTROL KIT 24V. Double acting inc. weather resistent box fitted with hour meter, wiring loom, PTO switch and pneumatic hold back valve.(INCLUDES: WLEAC001, 511239, AIR005 & 594402)


Blowers & CompressorsBetico Manual

Model T5CDL9L

Appendix 1: Cycloblower Spare Parts Drawings

37--2--600 Page 16

SECTION 5PARTS LIST

MODEL T5CDL9L CYCLOBLOWERr

6




Betico Manual

Model T5CDL9L Parts ListOrder by Convair Part Number and Description. (Reference Numbers refer to diagrams).Ref # Description Qty Manuf.Part # Convair Part #

1 Housing 1 8500422 Special order Rotor Group, Includes Ref. No. 2 & 3 1 200CTH010A Special order2 Rotor–Main3 Rotor–Gate4 Bearing Carrier–Inlet End 1 8500155 Special order5 Bearing Carrier–Discharge End 1 8501180 Special order6 Gear Kit (Includes next two items) 1 200CTH6008 GD106 Gear–Driver 1 Gear–Pinion 1 8 Hub–Gear 1 8500011 Special order9 Clamp Plate–Bearing 1 8500152 Special order10 Cover–End 2 8500151 GD11011 Cover–End 1 8500150 Special order12 Cover–End Shaft 1 8501103 GD15813* Cover–End 1 8500436 Special order14 Spacer–Bearing 4 8500148 GD11415 Seal–Rotor Shaft 4 8501081 GD11516 Shim–Housing 1 8500023 GD11617 Gasket–Cover 1 8500030 GD11718 Shim–Housing Set 1 8500029 GD11819 Shim–Shaft Set 2 8501269 GD11921 Gasket–Cover End 3 8500163 GD12122 Seal–Oil Shaft 2 8501240 GD12223 Seal–Oil Bearing 4 60DD513 GD12324 Bearing–Ball Single Row 1 8500165 GD12425 Bearing–Roller Cylindrical 1 8501200 GD12526 Bearing–Angular Contact 4 8500406 GD12627 Gauge–Oil Level 1 40P45 GD12728 Breather Filter 1 5L223 GD12829 Breather Vent 2 5L255 GD12930 Fitting Lube–Grease 2 40E9 GD16231 Fitting Lube–Relief 2 40E37 GD16932 Pipe Plug–SqHd 1 64AA3 Special order33 Plug–Magnetic 1 64BJ4 GD15934 Pipe Plug–Countersunk 2 64B16 GD13435 Key–Square 2 8500109 GD17736 Pin–Dowel 6 62M83 GD13637 Screw–Socket Head Lock 8 75P6N GD17538 Screw–Socket Head Lock 8 75P57N GD17639 Screw–Hex Head 56 75A1 Special order40 Screw–Round Head 3 75G17 GD17941 Washer–Plain 4 95U3 Special order42 Washer–Lock 60 95B3 GD18043 Bearing Locknut 3 50Z9 GD14344 Bearing Lock Washer 3 95W25 GD14445 Clamp Plate–Shaft 1 8500414 Special order46 Fusible Plug 1 8501246 GD14647 Cover–Vent 2 8501360 Special order48 Screw–Hex Head 4 75A2 Special order49 Pin–Timing 1 8504125 GD14950 Bushing–Timing 1 8504126 GD15051 Washer–Plain 1 95W17 GD13252 Screw–Socket Head Lock 1 75LM12N GD131

*All parts as listed are for top discharge construction. For units built with top inlet construction, all parts are the same

except gear end cover, order as follows: Ref. No. 13 Cover–End, Part Number 850066




Model T5CDL12L

37--2--600 Page 18

MODEL T5CDL12L CYCLOBLOWERr

6




Betico Manual

Model T5CDL12L Parts ListOrder by Convair Part Number and Description. (Reference Numbers refer to diagrams).Ref # Description Qty Manuf.Part # Convair Part #

1 Housing 1 200CTH002 Special order Rotor Group, Incl. Ref. No. 2 & 3 1 208CTH010A Special order2 Rotor--Main 3 Rotor--Gate4 Bearing Carrier--Inlet End 1 8500155 Special order5 Bearing Carrier -- Discharge End 1 8501206 Special order6 Gear Kit (Includes next two items) 1 201CTH6008 GD107 Gear -- Driver 1 Gear -- Pinion 18 Hub -- Gear 1 8500011 Special order9 Clamp Plate -- Bearing 1 8500152 Special order10 Cover -- End 2 8500151 GD11011 Cover -- End 1 8500150 Special order12 Cover -- Shaft 1 8501103 GD15813* Cover -- End 1 8500436 Special order14 Spacer -- Bearing 4 8500148 GD14415 Seal -- Rotor Shaft 4 8501081 GD11516 Shim -- Housing 1 8500023 GD11617 Gasket -- Cover 1 8500030 GD11718 Shim -- Housing Set 1 8500029 GD11819 Shim -- Shaft Set 2 8501269 GD11921 Gasket -- Cover End 3 8500163 GD12122 Seal -- Oil Shaft 2 8501240 GD12223 Seal -- Oil Bearing 4 60DD513 GD12324 Bearing -- Ball 1 8500165 GD12425 Bearing -- Roller Cylindrical 1 8501200 GD12526 Bearing -- Angular Contact 4 8500406 GD12627 Gauge -- Oil Level 1 40P45 GD12728 Breather Filter 1 5L223 GD12829 Breather Vent 2 5L255 GD12930 Fitting Lube -- Grease 2 40E9 GD16231 Fitting Lube -- Relief 2 40E37 GD16932 Pipe Plug -- SqHd 1 64AA3 Special order33 Plug -- Magnetic 1 64BJ4 GD15934 Pipe Plug -- Countersunk 2 64B10 GD13535 Key -- Square 3 8500109 GD17736 Pin -- Dowel 6 62M83 GD13637 Screw -- Socket Head Lock 8 75P6N GD17538 Screw -- Socket Head Lock 7 75P57N GD17639 Screw -- Hex Head 56 75A1 Special order40 Screw -- Round Head 3 75G17 GD17941 Washer -- Plain 4 95U3 Special order42 Washer -- Lock 56 95B3 GD18043 Bearing Locknut 3 50Z9 GD14344 Bearing Lock Washer 3 95W25 GD14445 Clamp Plate -- Shaft 1 8500414 Special order46 Fusible Plug 1 8501246 GD14647 Cover -- Vent 2 8501360 Special order48 Screw -- Hex Head 4 75A2 Special order49 Pin -- Timing 1 8504125 GD14950 Bushing -- Timing 1 8504126 GD15051 Washer -- Plain 1 95W17 GD13252 Screw -- Socket Head Lock 1 75LM12N GD131

*All parts as listed are for top discharge construction. For units built with top inlet construction, all parts are the same

except gear end cover, order as follows: Ref. No. 13 Cover -- End, Part Number 8500665.



Notes


-

ISO-9001EMPRESA CERT

IFICA

DA

UNE-EN

ISSUE: JULY 2013

BETICO SB1 COMPRESSOR

PARTS MANUAL

Betico Manual

Appendix 2: Betico Spare Parts Manual


10

9

-02Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A.

Vitoria - ESPAÑA

D04-SB1GENERAL

MODEL SB-1 20-06-13

DESCRIPCIÓN

AIR FILTERS 28-12-13

5

2

41

1

1

1

3

5

N° Part # Drawing number1 D08-SB12 D12-SB13 D23-S14 37921765 D24-SB19 4353003

10 4002949

KIT MANTENIMIENTO / SERVICE KIT SB -014

Código / Code: 5815662(Incluye todos los filtros)

Betico Manual


11

7

10

6

1

1110

24

3

WIT

HO

UT

RE

GU

LA

TIO

N K

IT

12

12

5

7

9

8

5

8

9

6

N°

Par

t #

Dra

win

g n

um

ber

1D

08-S

B1

2D

12-S

B1

3D

23-S

14

D13

-SB

1 -0

05

D24

-SB

16

3722

819

748

1480

68

4017

632

946

3116

810

4001

644

1146

0995

812

4726

588

DE

SC

RIP

CIÓ

N

-02

D05

-SB

1

AN

ULA

AL

DE

FE

CH

A:

MIG

UE

L C

AR

RE

RA

Y C

ía.,

S.A

.V

itori

a - E

SP

AÑ

A

FE

CH

A D

E E

DIC

ION

:20

-06-

13

MO

DE

L S

B-1

GE

NE

RA

L

Nº

DE

PLA

NO

28-1

2-13

Betico Manual


WIT

H C

OO

LIN

G F

AN

-02

D07

-SB

1

AN

ULA

AL

DE

FE

CH

A:

MIG

UE

L C

AR

RE

RA

Y C

ía.,

S.A

.V

itori

a - E

SP

AÑ

A

FE

CH

A D

E E

DIC

ION

:20

-06-

13M

OD

EL

SB

-1

Nº

DE

PLA

NO

GE

NE

RA

L

DE

SC

RIP

CIÓ

N

01-0

3-13

12 11

Det

alle

A

13

A

2

3

1

8

109

141

11

4

15

N°

Par

t #

Dra

win

g n

um

ber

1D

08-S

B1

2D

12-S

B1

3D

23-S

14

D24

-SB

18

D18

-SB

19

4364

372

1047

4563

811

4000

737

1240

0063

813

4001

115

1436

5115

815

4621

623

Betico Manual


5

55

5

5

6

4

14

6

5

5

5

N°

Par

t #

Dra

win

g n

um

ber

1D

11-S

B1

3D

22-S

B1

4D

18-S

15

D10

-SB

D6

D10

-S1

WIT

HO

UT

RE

GU

LAT

ION

KIT

DE

SC

RIP

CIÓ

N

D08

-SB

1

AN

ULA

AL

DE

FE

CH

A:

MIG

UE

L C

AR

RE

RA

Y C

ía.,

S.A

.V

itori

a - E

SP

AÑ

A

FE

CH

A D

E E

DIC

ION

:13

-06-

03M

OD

EL

SB

-1

Nº

DE

PLA

NO

CO

MP

RE

SO

R B

AS

E-0

0

Betico Manual


DE

SC

RIP

CIÓ

NN

º D

E P

LAN

O

D09

-SB

1

AN

ULA

AL

DE

FE

CH

A:

MIG

UE

L C

AR

RE

RA

Y C

ía.,

S.A

.V

itori

a - E

SP

AÑ

A

FE

CH

A D

E E

DIC

ION

:17

-02-

12M

OD

EL

SB

-113

-06-

03

CO

MP

RE

SO

R B

AS

E

WIT

HO

UT

RE

GU

LAT

ION

KIT

-01

AB

Det

alle

A

89

Otr

o ex

trem

o

en

D15

-SB

1

A

5

5

5

5

6

4

14

6

5

5

55

R2

N°

Par

t #

Dra

win

g n

um

ber

1D

11-S

B1

3D

22-S

B1

4D

18-S

15

D30

-S1

6D

10-S

17

D01

-RA

CO

RE

S8

D03

-RA

CO

RE

S9

D01

-RA

CO

RE

S

8

7

AB

Betico Manual


DE

SC

RIP

CIÓ

NN

º D

E P

LAN

O

D10

-SB

1 -0

2

AN

ULA

AL

DE

FE

CH

A:

MIG

UE

L C

AR

RE

RA

Y C

ía.,

S.A

.V

itori

a - E

SP

AÑ

A

FE

CH

A D

E E

DIC

ION

:

MO

DE

L S

B-1

14-1

0-13

CO

MP

RE

SO

R-C

IGÜ

EÑ

AL

25-0

3-10

Otr

o ex

trem

o

en

D15

-SB

1

4

75

109

8

3

1

2

R1

6

5

en

D13

-SB

1 O

tro

extr

emo

R3

(with

out R

egul

atio

n K

it)

(with

Reg

ulat

ion

Kit)

TO

RQ

UE

INF

OR

MA

TIO

N1º

.- T

orq

ue:

6 K

g.m

2º.-

Ap

ply

th

read

sea

lan

t:

LO

CT

ITE

243

N°

Par

t #

Dra

win

g n

um

ber

1D

11-S

B1

2D

08-S

13

D22

-SB

14

D

01-R

AC

OR

ES

546

2162

36

4011

916

740

0083

68

4717

637

940

0416

810

4622

084

Betico Manual


With Regulation Kit 5

7

4

6

3

13

2

1

8

10

11

9

4

4

5

5

4

4

44

4

Without Regulation Kit

4

4

N° Part # Drawing number1 30122032 46747543 40000264 30319065 37006096 40028407 46141158 40005399 595130110 400073711 401106412 462876813 4717207

12

17-02-12

Nº DE PLANO

ANULA AL DE FECHA:


-01D11-SB1

Vitoria - ESPAÑA

CARTER

MODEL SB-1

DESCRIPCIÓN

13-06-03

Betico Manual


11

Kit Impulsión (Opcional)

Otro extremoen D16-SB1

6

5

7

2

3

1Models without Regulation

R7

8

10

9

Models with Regulation Kit

4

Grupos C/RegulaciónCód.3814731

N° Part # Drawing number1 30175092 40016443 40015454 D23-SB15 40013476 40012487 40011498 D01-RACORES9 3007609

10 400104011 4001446

DESCRIPCIÓN Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A. 14-10-13

D12-SB1 -02

Vitoria - ESPAÑA

AIR OUTLET

MODEL SB-115-02-13

Betico Manual


Bearings rated to 100°C

Torque 30m.Kg

5

4

11

3

14

13

12

15

10

9

8

2

7

1

6

SB-1 Y SB-2 Correasno se monta

N° Part # Drawing number1 30292072 52977053 40019334 40021395 40701026 40014387 40012308 40024109 4002311

10 302480211 466679212 300550413 400211314 407200915 4049403


ANULA AL DE FECHA:


Vitoria - ESPAÑA

D08-S1 -00

Compresor S-1

SB1-82 CRANKSHAFT E-41

20-12-02Betico Manual


34

52

1

D10-SB1

6

D08-SB2

7

SB-1

R1

D09-SB1H

SB-1H

D08-SB4D10-SB3

SB-4SB-3SB-2

Otro extremo en "Ver tabla"

R1

Grupos Sin Regulación

N° Part # Drawing number1 40026422 40025433 40331914 40352875 40356836 40027417 4002949


ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A. MODEL SB-1

D13-SB1 -00

Vitoria - ESPAÑA

CUADRO MANDOS

13-06-03 Betico Manual


3

24

4

1

N° Part # Drawing number1 53698352 40001413 40019904 4049403

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA

D18-SB1 -00DESCRIPCIÓN

COOLING FAN

MODEL SB-113-06-03Betico

Manual


Vitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A. Compresor SB-1

D22-SB1 -00DESCRIPCIÓN

CRANKCASE COVER PLATE

24-03-10

4

5

11

10

9

8

6

1

13

16

14

15

12

7

32

N° Part # Drawing number1 36570492 5800177 D36-S13 5799023 D35-SI4 40005135 40116846 46477197 40093408 46281319 400043010 462833911 464127412 402315013 462162314 400113115 435532116 4059279

Betico Manual


KIT WITH REGULATION KIT COD.5812867

R7

KIT WITHOUT REGULATION KIT COD.5812966

GRUPO SB-103-04-13

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A.U.

Vitoria - ESPAÑA

D23-SB1DESCRIPCIÓN

KIT IMPULSION VAL. SEGURIDAD 00

Otro extremo

Models without Regulation Kit

en D16-SB1

2

34

1

5

6

8

7

Models with Regulation Kit

Apply thread sealant LOCTITE L-5910

(Cód. A813550)

N° Part # Drawing number1 4810432 2 4786962 3 4786863 4 47884555 40010406 40231507 46499478 D01-RACORES

Betico Manual


7

4

3

8

6

5

4

1

2

9

N° Part # Drawing number1 4813816 2 4814608 SBD-3023 4815704 4 40007375 40011156 40218247 40051408 40024939 4698696

DESCRIPCIÓN

AIR FILTER ASSEMBLY

MODEL SB-120-06-13

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:

D24-SB1

Vitoria - ESPAÑA

MIGUEL CARRERA Y Cía., S.A.U.

00Betico

Manual


4

4

5

1

3

2

3

Cod.5449413

N° Part # Drawing number1 40019172 40024363 40025354 40027335 4002634

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA

D10-S1 -00DESCRIPCIÓN

PISTON ASSEMBLY

COMPRESOR S-114-10-02Betico

Manual


6

7

5

7

2

4

1

3

Torque 6 m.Kg

N° Part # Drawing number1 30159092 47150943 47149984 D27-S15 40005626 40001257 4715391

20-02-12

Nº DE PLANO

ANULA AL DE FECHA:


-01D10-SBD

Vitoria - ESPAÑA

TOP END ASSEMBLY WITHOUT REGULATION KIT

MODEL SB1

DESCRIPCIÓN

15-10-02

Betico Manual


3

3

3

5

2

Torque

2

8

D14-S1

7

3 m.Kg

1

6

4

Par de apriete: 1º etapa: 8 m.Kg

2D16-S1

N° Part # Drawing number1 30234082 D28-S13 D29-S14 3597302 C-30235 -005 40021476 30331007 40022468 4002345

VALVE ASSEMBLY WITHOUT REGULATION KIT

D27-S1 -0129-01-14

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:

Compresor S-1Vitoria - ESPAÑA

MIGUEL CARRERA Y Cía., S.A.

DESCRIPCIÓN

25-01-07

Check carefully that parts are assembled correctly and tightened to the correct torque settings.

Betico Manual


19-09-06

Nº DE PLANO

ANULA AL DE FECHA:


DESCRIPCIÓN

D14-S1

Vitoria - ESPAÑA

OUTLET VALVE ASSEMBLY

Compresor S-114-10-02

-01

2

3

1

4

N° Part # Drawing number1 5900605 D15-S12 30355013 40017434 4001842

Betico Manual


19-09-06

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


OUTLET VALVE BREAKDOWN

Compresor S-1 14-10-02

67

5

4

4

6

1

2

3

3

3

4

6


COMPLETE VALVE PART NO. 5900605

Torque 8 m.Kg

Máx

. 1,3

1M

ín.

1,15

Betico Manual


14-10-02

Nº DE PLANO

ANULA AL DE FECHA:


DESCRIPCIÓN

D16-S1

Vitoria - ESPAÑA

INLET VALVE ASSEMBLY WITHOUT REGULATION KIT

Compresor S-119-09-06

01

1

2

3

4

N° Part # Drawing number1 5906602 D17-S12 30352043 40017434 4001842

Betico Manual


19-09-06

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


INLET VALVE BREAKDOWN WITHOUT REGULATION KIT

Compresor S-1 14-10-02

6

7

5

5

5

1

3

2

3

4

4

4

3


Torque 8 m.kg

COMPLETE INLET VALVE PART NO.5906602

Máx

. 1,6

1M

ín.

1,45

Betico Manual



ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A.Compresor S-1

D30-S1 -00

Vitoria - ESPAÑA

TOP END ASSEMBLY WITH REGULATION KIT

25-01-07

4

7

6

5

5

2

3

1

Torque 6 m.kg

N° Part # Drawing number1 30159092 D31-S13 47150944 47149985 47153916 40005627 4000125

Betico Manual


3

2

2

3

5

4

1

7

8

8

4

Par de apriete:

7

D14-S1

2

6

1º etapa: 8m.Kg

Par de apriete 3m.Kg

3 D22-S1

N° Part # Drawing number1 30234082 D29-S13 D32-S14 30649075 30331006 40021477 40022468 4002345

NOTA: Verificar con atención que se aplican los pares de apriete indicados y comprobar que los espárragos se han apretado correctamente contra los fijadores de las válvulas.

DESCRIPCIÓN

Vitoria - ESPAÑACompresor S-1

29-01-14

Nº DE PLANO

ANULA AL DE FECHA:

VALVULAS EN BAJA (C/Regulación)

MIGUEL CARRERA Y Cía., S.A. FECHA DE EDICION:

D31-S1 -01

25-01-07

Betico Manual


Betico Manual

1

5

2

6

3

4

4

7

N° Código Nº Plano1 5900506 D25-S1 -002 30348013 40018674 40016695 40019666 40017437 4001842


ANULA AL DE FECHA:


Vitoria - ESPAÑA

D22-S1 -00

Compresor S-1

VALVULA ADMISION S-1 (Con Regulación)

27-05-03



INLET VALVE INC. REGULATION COMPLETE PART NO.5900506


ANULA AL DE FECHA:


Vitoria - ESPAÑA

D25-S1 -00

Compresor S-1

INLET VALVE ASSEMBLY

19-06-03

3

9

8

10

7

2

4

4

1

6

5

5

5

4

3

3

N° Part # Drawing number1 30679002 30215013 52972004 52971015 59569796 40000917 40012228 40027829 4002881

10 4002980


Betico Manual



Betico Manual

2

2

3

4

4

3

6

6

5

CON ROD COMPLETE PART NO.5951400

8

7

Oversize 0.5 mm

Oversize 1 mm


Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


CON ROD ASSEMBLY

COMPRESOR S-114-10-02 Betico

Manual




NOTE: Check that the letter D is in the upper position next to the recess R.

12-03-2010

Nº DE PLANO

ANULA AL DE FECHA:


DESCRIPCIÓN

D35-S1

Vitoria - ESPAÑA

BI-DIRECTIONAL OIL PUMP

MODEL S-1

00

9

Bomba Completa Cód.5799023

11

10

1

7

2

3

5

4

8

6

ATTENTION! Contact Convair for instructions to change the direction of rotation of the oil pump.

N° Part # Drawing number1 37991142 40007113 40006124 37990155 46285376 40010167 40009198 30291089 400111510 400051311 4681379

R


Betico Manual



Betico ManualVitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A. COMPRESOR S-1

D23-S1DESCRIPCIÓN

OIL FILLER ASSEMBLY

13-06-03

4

1

2

3

5

N° Part # Drawing number1 30986082 5957332 3 5950907 D21-S14 30536035 4011684

Betico Manual




3

COMPLETE PART NO.5950907

N° Part # Drawing number3 4002816

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


OIL FILLER BREATHER

COMPRESOR S-114-10-02


Betico Manual



Betico Manual

Bicono estanqueidadCód. 4035287

Olive Part No. 4035287

Tuerca racor hidraulicoCod. 4447003

Nut Part No. 4447003


Vitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:

FECHA DE EDICION:MIGUEL CARRERA Y Cía., S.A.14-10-13

D01-RACORES -03DESCRIPCIÓN

AIR FITTINGS 1/8" TO 6mm TUBE

Grupo RACORES19-10-06

3

2

1

4

TUBE Ø 6 N° Part # Drawing number1 40380262 40356833 40376224 4023150

TUBE Ø 6

2

4

3

1

2



3

4

1

2


Betico Manual





2

4

1

3

N° Código Nº Plano1 46917332 40356833 40376224 4692533




1

TUBE Ø 6

4

3

2

TUBE Ø 6

2

N° Código Nº Plano1 46926322 46925333 40356834 4037622


Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA



23-09-03


Betico Manual



Betico Manual




4

1

5

2

5

2

5

4

3

3


TUBE Ø 6

5

45

4

2

2

33

1

3

TUBE Ø 6



Vitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:


DOUBLE SWIVEL AIR FITTINGS Ø 6 D03-RACORES -03DESCRIPCIÓN


19-10-06

Betico Manual



19-10-06

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA



Grupo RACORES 23-09-03





4

4

1

3

2


4

1

3

2



Betico Manual


Betico Manual

19-10-06

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


AIR FITTINGS 1/8" TO Ø 8


Nut Part No.4454595


TUBE Ø 8

1

4

4

2

3

TUBE Ø 8


1

2

3

4







Vitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:



DOUBLE SWIVEL AIR FITTINGS Ø 6


6

1 5

3

2

2

2

4

5

6

6

5

TUBE Ø 6 N° Part # Drawing number1 40378382 40231503 40380264 40367725 40356836 4037622



Betico Manual


Betico Manual


1

23

43

7

3

6

8

5

N° Part # Drawing number1 40378382 46245693 40231504 40367725 44493896 40356837 46241638 4037622

TUBE Ø 8

1

32

32

3

5

4

4

5

TUBE Ø6 Y Ø 8






Olive Part No.4449280

Vitoria - ESPAÑA

Nº DE PLANO

ANULA AL DE FECHA:



DOUBLE AIR FITTINGS





14-10-13

Nº DE PLANO

ANULA AL DE FECHA:


D08-RACORES 02DESCRIPCIÓN

DOUBLE AIR FITTINGS 6mm & 8mm

Grupo RACORESVitoria - ESPAÑA 19-10-06

Nut Part No. 4454595 Nut Part No. 4447003

8

TUBE Ø6 Y Ø 8

1

42

43

4

6

5

7

N° Part # Drawing number1 46505152 46850653 46926324 46925335 46241636 44493897 40376228 4035683



Betico Manual



19-10-06

Nº DE PLANO

ANULA AL DE FECHA:


Vitoria - ESPAÑA


6mm TEE AIR FITTING


2

3

2

2

3

1

3

N° Part # Drawing number1 47809402 40356833 4037622


Betico Manual




Betico Manual

DRG CO1-SB1



Betico Manual

Betico Manual

DRG CO2-SB1





Betico Manual

DRG CO3-SB1



Betico Manual


Betico Manual

DRG CO4-SB1




Betico Manual

DRG CO5-SB1



Betico Manual

DRG CO6a-SB1

Betico Manual





Betico Manual


Betico Manual




Betico Manual



Betico Manual


Betico Manual


Terms and Conditions of Sale1. Application of Terms and Conditions Orders are only accepted subject to the conditions of sale as detailed herein. Any variation of these conditions in any document of the buyer is inapplicable unless accepted in writing by Convair.

2. Payment Terms. Unless an account has been authorised, payment terms are C.O.D. If an account has been authorised, payment terms are strictly 30 days from the end of the month following the invoice date except for tankers where a 20% deposit with order applies with balance due on delivery. Convair reserves the right to make specifications and price changes on standard products, without prior notice. Please consult Convair for current product and price information.

3. Prices All prices quoted are ex works and are subject to change without notice. Shipping charges will be added to the invoice. Convair is not responsible for loss or damage once any product has left its premises. All prices quoted are exclusive of 10% GST.

4. Damage, Loss in Transit Convair Engineering Pty Ltd. does not accept any responsibility for shortages or for goods lost or damaged in transit, unless such shortages, or loss or damage on the delivery note is specified as examined, or, if the goods have been signed for as not examined, such shortages, loss or damage are notified within 48 hours and reported by separate notice in writing to the carriers and Convair within 5 days of receipt of the goods by the buyer or the consignee.

5. Delivery Commitments a) Delivery commitments are entered into in good faith but are not guaranteed, and Convair shall not be liable for any loss or damage occasioned by failure to deliver on the specified date howsoever caused. Nor shall failure be deemed to be breach of the Order, or any of its conditions, or part thereof. b) Refusal of the buyer to accept part of whole delivery at the time specified in the Order shall permit Convair to treat the Order as repudiated by the buyer and to decline to make further deliveries without prejudice to Convair’s right to recover damages for breach of Order. c) Where Orders provide for a single delivery, goods shall be delivered and accepted as soon as ready. d) Where Orders provide for deferred delivery, such delivery shall be accepted as specified in the Order, (or as soon thereafter as ready).

6. Force Majeure Convair will endeavour to give delivery within the time specified in the quotation. Convair shall not be liable for any loss or damage which may be sustained by the buyer through failure on the part of Convair to deliver within the time specified in this Order, for any loss or damage incurred by reason of act of God, war, riots, fires, strikes, lockouts, cessation of labour, trade disputes, break-downs, accidents of any kind or any other cause whatsoever beyond the control of Convair whether similar to these aforesaid or not. Convair shall be entitled to recover all monies owing to them in respect of deliveries made or services performed prior to such failure. The time of any such suspension will be added to the time of original Order.

7. Cancellation of Orders Cancellation of an order, in whole or part, cannot be accepted without Convair’s written consent.

8. Warranty a) Goods manufactured by Convair are warranted against defects in workmanship and materials for a period of one (1) year from the date of delivery. b) Convair’s sole responsibility under this warranty shall be to either repair or replace, at its option, any product which fails during the warranty period. c) This warranty does not cover travel expenses, road service, towing, loss of revenue, customer or overtime labour, downtime, drivers’ expenses or cost of rental equipment. d) Warranty repairs do not constitute an extension of the original warranty period for the piece of equipment as a whole or for any specific component. e) goods supplied by Convair but manufactured by others are not warranted by Convair but are supported by the warranty of the original manufacturer. These include compressors, blowers, suspensions, axles, wheels, tyres, valves, etc. f) No Conditions of Warranty is expressed or to be implied as to the life of the goods supplied. g) Any express or implied statement, condition or warranty, statutory or otherwise, not stated herein is hereby excluded and deemed to be inconsistent herewith. No responsibility is accepted by Convair for any damage or loss arising directly or indirectly out of goods supplied or for any damage or loss arising by reason of any failure of the goods to comply with the specifications. Furthermore Convair shall be under no liability for any damage or injury arising directly or indirectly out of the supply from us of the goods.

9. Title a) The Ownership of the goods ordered herein will only be transferred to the buyer on payment by the buyer. b) Should the buyer remain in default of any payment for which the buyer is liable to Convair, Convair reserves the right to decline to make any further deliveries. c) The buyer shall store all goods delivered by Convair but for which payment has not been made, in such a way as to be clearly separate and identifiable from the buyer’s other goods and products and the buyer hereby grants to Convair, its servants or agents the right to enter on to the buyer’s premises for the purposes of recovering such goods at any time until payment. d) Notwithstanding the above, if the buyer shall sell any goods delivered in such a manner as to pass to a third party a valid title to the goods, the buyer shall hold the proceeds of such sale on trust for Convair; providing that nothing herein shall constitute the buyer the agent of Convair for the purposes of any such subsale and also providing that the buyer shall not be entitled to sell such goods after the appointment of a Receiver to its property, or it has been placed in liquidation, or, not being a company, has committed an act of bankruptcy. e) The buyer shall assume the risk of loss or damage to the goods from the time of delivery ex works and must accordingly reply on its own insurance from that time.

10. Returns Prior authorisation is required before any goods may be returned.

11. Law Applicable To the extent any provision of this warranty contravenes the law of any jurisdiction, such provision shall be inapplicable in that jurisdiction, and the remainder of the warranty shall not be affected.

12. Proprietary design Convair reserves all patent, copyright, proprietary design, manufacturing, reproduction, and sale rights to all products that the company manufactures. The copying of any products or documents without the written consent of Convair is a violation of national and state laws and will be subject to legal action by Convair.

13. PPSA a) The buyer acknowledges that these terms and conditions (and, where applicable, any contract) constitute a security agreement for the purposes of the PPSA. A security interest is taken in all goods previously delivered to the buyer and all the goods that may be supplied in the future to the buyer securing the performance by the buyer of its obligations under these terms and conditions and any contract between Convair and the buyer. b) The buyer acknowledges and agrees that all goods supplied under these terms and conditions from time to time constitute its inventory, within the meaning of that term in the PPSA. c) The buyer must ensure that no security interest (within the meaning of the PPSA) is created, exists or subsists over the goods in its possession or control other than a security interest arising under these terms and conditions. d) The buyer agrees to do anything (such as obtaining consents, completing, signing and producing documents and supplying information) which Convair considers necessary for the purposes of: (i) ensuring that any security interest under these terms and conditions is enforceable, perfected and otherwise effective; (ii) enabling Convair to apply for any registration, or give any notification, in connection with any security interest under these terms and conditions so that it has the priority required by Convair; and (iii) enabling Convair to exercise its rights in connection with any security interest under these terms and conditions. e) The Seller may apply all payments or other amounts it receives from the buyer or in exercise of its rights and remedies under these terms and conditions, first, in payment of any interest owing by the buyer to Convair; secondly, in payment of any costs, charges and expenses incurred by Convair as a consequence of any breach by the buyer of these terms and conditions; thirdly, in payment of all fees and charges due to Convair under or in connection with these terms and conditions; and, fourthly, in payment and satisfaction of all other moneys owing by the buyer to Convair in accordance with the order of priority set out in section 14(6)(c) of the PPSA and Convair’s application of such payments and amounts shall prevail notwithstanding any purported application or appropriation to the contrary by the buyer. f) The Seller need not give any notice under the PPSA (including a notice of a verification statement) unless the notice is required by the PPSA and cannot be excluded. g) To the extent permitted by law, the following provisions of the PPSA shall not apply as between Convair and the buyer: section 121(4); section 125; section 130 (to the extent that it requires Convair to give a notice to the buyer); section 132(3)(d); section 132(4); section 135; section 142; section 143; and all provisions of Part 4.3 of the PPSA in relation to any of the goods while a person is a controller of that property in a capacity other than those mentioned in section 116(1) of the PPSA. h) Neither party will disclose any of the information set out in section 275(1) of the PPSA in relation to this document or any security interest created under this document to any person (except that Convair may do so where required due to the operation of section 275(7) of the PPSA or in accordance with another provision of this document). g)”PPSA” means the Personal Property Securities Act 2009 (Cth) (PPS Act) and any regulation made at any time under the PPS Act (each as amended from time to time) and any amendment made at any time to any other legislation as a consequence of the PPSA.

14. Limitation of liability a) Notwithstanding any other provision of these terms and conditions and to the extent permitted by statute, Convair will not in any circumstances be liable for any: (i) indirect, consequential, incidental, special r exemplary damages, expenses, losses or liabilities; or (ii) loss of profits, business interruption, loss of revenue, economic loss, loss of goodwill, loss of opportunity or expectation loss or loss of production, which may be suffered or incurred by any person, including in respect of the goods or otherwise in connection with these terms and conditions. b) The aggregate liability of Convair to the buyer in respect of events, acts or omissions will be limited, to the extent permitted by statute, to the purchase price paid for the goods.

Parts Catalogue

Issue 3

Online ordering now available www.convair.com.au

Authorised Distributors:

Convair Engineering Pty Ltd

93 Miller StreetEpping VIC 3076Australia

Tel +613 9408 7255Fax +613 9408 [email protected]

www.convair.com.au

CONVAIR Parts Catalogue, Issue 3

Online ordering now

available at ww

w.convair.com

.au

Date post:	16-Jul-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Convair Engineering - Authorised Distributors · 2016-04-26 · Convair Engineering Pty Ltd 93...

Documents