Servo-Conventional lathes and milling machinesMade by KNUTH

CONVENTIONAL

MACHINING REDEFINED

2

SERVO-CONVENTIONAL

MACHINE TOOLS

BY KNUTH

KNUTH SERVO-CONVENTIONAL

www.knuth.de/servo

Conventionalmachining redefined!

3

CNC level accuracy and surface quality

Electronic stops for X and Z axis

Servo-feed technology

Offer

You are using conventional lathes and milling machines in your workshop

for flexible production of single parts and small batches? You are consid-

ering modernizing your equipment to optimize the quality of the finished

parts? You want to increase productivity, while reducing costs and mainte-

nance and make work simpler and more comfortable?

Our range of servo-conventional machine tools provides the right solution:

Servoturn® Highlights:

Maintenance-free feed system with servo motors

Electronically selectable thread leads

Constant cutting speed

Electronic stops

Infinitely variable feeds and spindle speeds

Mineral-casting machine frame with linear guides

Preloaded ball screws on all axes

Advanced feed technology:

Servo drives that translate your hand movements via preloaded ball screws

with the precision and dynamics of modern CNC machines

2 selector switches for setting the desired thread leads, feed

can be infinitely adjusted from 50% to 100% via an override potentiometer

Electronic hand-wheels offering the same handling and positioning

as with a conventional machine

New lathes bed:

Mineral-casting reduces vibration 6 times faster than cast-iron (GG25)

Linear guides provide precision, stability,

long life, minimum maintenance and

replaceable parts

Benefits Operators can apply their skills without

adapting to a new machine or learning new programming techniques

Higher operating efficiency for increased productivity

Higher precision and improved surfaces for increased quality

Extended tool life reduce costs

Significantly reduced maintenance

Low cost maintenance due to large series production

LathesThe following servo-conventional lathes are available:

Servoturn® 410x1000

Servoturn® 560x2000

Servoturn® 560x3000

For more information, visit www.knuth.de/servo

4

SERVO-CONVENTIONAL

MILLING MACHINES

BY KNUTH

KNUTH SERVO-CONVENTIONAL

www.knuth.de/servo

Easier, more precise, and more efficient due to integrated electronics

5

Pocketing

Face milling

Cutter head

Servomill®-HighlightsControl developed and built in Germany

Positioning control for traveling pre-selected paths on all axes

Constant cutting speed, whereby the feed speed is based on the spindle speed

Zero-backlash preloaded ball screws

Servo motors on all axes, infinitely variable feed, rapid feed, and speed control

Electronic spindle load indicator

Electronic hand-wheels on all axes

X, Y and Z axes can be controlled via joystick

Integrated position indicator with glass scales

Your AdvantagesSimple: intuitive operation - practical layout of control elements and

streamlined function

Faster: Rapid feed on all axes reduces down-times

More precise: Operated via electronic hand-wheels - axes are powere

by high-quality servo drives that translate your hand movements with

the precision and dynamics of modern CNC machines

More reliable: Drives, spindles, and measuring systems are totally enclosed

or mounted in protective enclosures and virtually maintenance-free

More capacity: this machine only uses premium drive components that

are designed for continuous operation

Maintenance-free: no regular maintenance needed for the entire feed drive

Advanced feed technologyElectronic hand-wheels: smoother and more precise as

conventional machines

Operation via joystick: easy handling, prefect for processing of

work sequences

Electronic fixed stops: set 2 limit stops at 3 positions on each axis by

the push of a button

High repeatability and more positions than on conventional machines

Constant cutting speed: in a selectable

feed-per-spindle revolution ratio in the range of 0.01 to 1 mm/rev – ensures

increased efficiency and benefit

Milling machinesThe following servo-conventional lathes are available:

Servomill® 700 • 1000 - multi-purpose milling machines

Servomill® UFM 6 • 8V - universal milling machines

Servomill® UWF 5 • 10 • 12 • 15 - milling machines with swiveling

angle cutter head

For more information, visit www.knuth.de/servo

High quality one-piece casting

Mineral-casting is one of the most efficient, modern construction

materials. Manufacturers of precision machines were among the

pioneers in the use of mineral casting.

Today, its use with regards to milling machines, drill presses, grind-

ers and electric discharge machines is on the rise, and the advan-

tages are not limited to high speed machines (HSC, HSM).

Mineral casting is composes of mineral fillers like gravel, quartz

sand, glacial meal and binders. The material is mixed according to

precise specifications and poured cold into the molds.

A solid foundation is the basis for success!

State-of-the-art machine tools must run faster and faster, and pro-

vide more precision than ever. However, high travel speeds and

heavy-duty machining produce unwanted vibrations of the machine

frame.

These vibrations will have negative effects on the part surface, and

they shorten the tool life.

Mineral-casting frames quickly reduce vibrations – about 6 times

faster than cast-iron frames and 10 times faster

than steel frames.

Machine tools with mineral casting beds, such

as milling machines and grinder, are significant-

ly more accurate and achieve a better surface

quality.

In addition, tool wear is significantly reduced

and service life is extended.

Advantages of mineral-casting at a glance:

Dampens vibrations

Features thermal stability

Deformation-free under load

Robust and rust-free

Manufactured using environmentally friendly processes

Machines with KNUTH mineral-casting frames for your machinery

KNUTH mineral-casting machines offer state-of-the-art technology on a solid foundation Your advantage for a reliable production.

6

7

KNUTH machines with mineral-casting frames

X.MILL 700 HS X.MILL 640 M SERVOTURN® 410 SERVOTURN® 560

Damping performance of cast-iron / mineral-casting [1]

Thermal stability: Further benefits of KNUTH machine tools

for large-scale production are perfect rigidity and constant

accuracy.

Dynamics: All machines with rotating components, high

speeds and fast acceleration benefit from the outstanding

vibration damping properties provided by the mineral-casting

frame.

Temperature influence: Excellent thermal stability of ma-

chine frames ensures higher accuracy.

Stability: Mineral-casting is a highly homogeneous material

and deformation-proof under high loads.

Coolants and Lubricants: Mineral-casting is absolute rigid

compared to other media.

Ecology: A manufacturing process with excellent energy

footprint (without use of external heat sources), and recycla-

ble materials support the benefits of mineral-casting

Cost benefits of mineral-casting:

Increased productivity

Narrower tolerances

Longer service life

Improved surface quality

Certified Quality Careful monitoring of all man-ufacturing parameters ensure maximum product quality. During the design phase extensive FEM cal-culations are performed and taken into account, to consistently use all benefits provided by this material.

8 For the latest specials, visit www.knuth.de

Standard Equipment: 3-axis position indicator, 3-jaw chuck (Ø 200 mm), quick-action WB tool changer head, coolant system, splatter guard, support shield, work lamp, quick-action tool changers (models WBD 25120 and WBH 32130), operator manual

The definition of a new standard for conven-tional lathes had to be perfect - therefore, we complemented the Servoturn® with the following features:

Mineral-Casting Machine Frame• mineral-casting reduces vibration 6 times faster than cast-

iron (GG25) and up to 10 times faster than steel- this ensures excellent surface quality that could not be achieved with conventional machines

• excellent thermal stability• modern manufacturing process with excellent energy footprint

Linear Profile Guide Rails• maximum reliability and performance• excellent rigidity, strength and accuracy is achieved by

optimum load distribution, designed for accepting high loads and torques

• no stick-slip effect• long life and minimum maintenance• replaceable parts

Recirculating Ball Screw

• considerably less errors due to loseness (backlash), resulting in significantly higher precision

• significantly reduced friction• no stick-slip effect• reduced heat development• less wear for even less maintenance requirements

intuitive operation

Servo drive technology – including "Teach-in" buttons that allow setting a limit stop at the current position

Options for Servoturn® 410 Part No.• 4-jaw chuck, Ø 200 mm, Camlock 1-6, 4000 rpm 146 472

• Oscillation element LT 55 (each) 103 322

For additional options for these machines, please visit our website and search for Servoturn® 410 (product search)

Specifications Servoturn® 410x1000Working areacenter width mm 1050turning diameter - over bed (max) mm 410- over support (max) mm 250X axis travel mm 225Z axis travel mm 960Z1 axis travel mm 100bed width mm 300Headstockspindle speed min-1 30 - 3000spindle bore mm 52spindle mount D1-6spindle taper MK 6FeedX axis feed mm/U 0,01 - 2Z axis feed mm/U 0,01 - 2

Thread Cuttingthread cutting, metric mm (24) 0,2 - 14thread cutting, Whitworth GPZ (24) 4 - 48Tailstocktailstock quill diam. mm 60tailstock taper MK 4tailstock quill stroke mm 150Drive Capacitiesheadstock motor rating kW 5,5motor rating X axis kW 1motor rating Z axis kW 1,5power supply V 400Dimensions / Weightoverall dimensions (LxWxH) mm 2250 x 1260

x 1250weight kg 2500Part No. 300 825

9

D

Servoturn® 410

For more information and options, visit www.knuth.de

Conventional Precision Lathe with servo drive - easy to operate, more reliable, more precise, for higher loads and reduced maintenance

Lathe

Tu

rnin

gIntuitive operation as we know it from conventional machines - only much better:

• feed and thread leads can be selected via rotary switch - what a brilliant concept

• stops can be set electronically with the press of a button

• feeds are infinitely variable between 50 and 100% via override potentiometer - finally available on a conventional lathe

• micro-control via electronic hand-wheels - but handling and postioning just as with a conventional machine

• axes are powered by high-quality servo drives that translate your hand movements with the precision and dynamics of modern CNC machines

• infinitely variable speed adjustment and constant cutting speed of headstock Cross-slide with mechanical movement and swivel

• mineral-casting• preloaded ball screws• electronic hand-wheels• axes are driven by servomotor• linear guide• V const

10 For the latest specials, visit www.knuth.de

Specifications Servoturn® 560x2000 560x3000Working areaCenter width mm 2200 3000Turning diameter - over bed (max) mm 560 560- over support (max) mm 350 350X axis travel mm 316 316Z axis travel mm 2000 2800Z1 axis travel mm 100 100Bed width mm 350 350HeadstockSpindle speed rpm 25-1600 25-1600Spindle bore mm 80 80Spindle mount D1-8 D1-8Spindle taper MT 7 MT 7FeedX-axis feed mm/rev 0.01-2 0.01-2Z-axis feed mm/rev 0.01-2 0.01-2

Thread CuttingMetric mm (24) 0.2-14 (24) 0.2-14Whitworth TPI (24) 4-48 (24) 4-48TailstockTailstock quill diam. mm 75 75Tailstock taper MT 5 MT 5Tailstock quill stroke mm 180 180Drive Capacitiesmotor rating Headstock kW 7.5 7.5motor rating X axis kW 1 1motor rating Z axis kW 1.5 1.5Voltage V 400 400Dimensions/Weight Dimensions (LxWxH)

mm

3700x1260x1800

4500x1260x1800

Weight kg 4300 5000Part No. 300 826 300 827

Feeds are selected via 2 rotary switches

Setting new standards with conventional lathes featuring large center widths: • The extensive Servoturn® series offers the same performance and

features as servo-conventional precision machines • All major controls are located for optimum accessibility or are

intuitively linked to their respective functions.• A powerful main spindle drive with infinitely variable speed allows

machining with constant cutting speed• Feed and thread leads are selected electronically via a rotary

switch, and executed by servo-motors featuring maximum precision and dynamics

• Quick-action tool holder included

11

Servoturn® 560

D

For more information and options, visit www.knuth.de

Tu

rnin

g

rigid rests for shaft machining included in standard equipment

Advanced servo-conventional lathe technology for powerful chip removal at long turning lengths

Precision LathesNEW! Center widths up to 3 m!• mineral-casting• preloaded ball screws• electronic hand-wheels• axes are driven by servomotor• linear guide• V const

Feed control via joystick, limit stops are set electronically by the push of a button

rigid rests for shaft machining included in standard equipment

Standard Equipment: 3-axis position indicator, 3-jaw lathe chuck, quick-action WB tool changer head, steady rest (19 - 165 mm), live rest (16-95 mm), coolant system, splatter guard, support shield, work lamp, quick-action tool changers (models WBD 25120 and WBH 32130), operator manual

Options Part No.• 4-jaw lathe chuck, Ø 315 mm, cast-iron 116 625

• Oscillation element LT 66 (each) 103 323

For additional options for these machines, please visit our website and search for Servoturn® 560 (product search)

• Heavy, large machine beds made of high-strength mineral-casting

• SERVOTURN® integrates many years of experience and superior construction properties, allowing uninterrupted cuts with high grade surface quality even under highest loads

• Long turning length can be machined with highest precision due to the superior thermal stability and damping properties of this machine

12

D

Servomill® 700The bestseller in the servo-conventional class for workshop applications, single parts production and training purposes

Multipurpose Milling Machine

Standard Equipment: 3-axis position indicator, electronic hand-wheels, pneu-matic tool clamping, chip tray, LED work lamp, coolant system, manually operated central lubrication, horizontal guideway cover, operating tools, operator manual

Options Part No.• Oscillation element LT 55 (each) 103 322• Hydraulic vise HS 125 125 024

• Divider ST 130 110 960• Milling chuck set ISO 40 106 044• Clamping tools, assorted, De Luxe 16/M14 105 300

Specifications Servomill® 700Working area X axis travel mm 680Y axis travel mm 365Z axis travel mm 370Table setup area mm 1370 x 300Table load capacity (max.) kg 350Feed Feed speed mm/min 0 - 1000 (infinitely var.)Feed per spindle revolution mm/rev 0.01 - 1X axis rapid feed mm/min 5000Y axis rapid feed mm/min 3000Z axis rapid feed mm/min 2000

Vertical Cutter Head Speed range (infinitely var.) rpm 50 - 4000Spindle mount ISO 40Quill stroke mm 125Spindle nose-to-table distance mm 180 - 550Drive capacities Main motor rating kW 3.7Voltage V 400 Dimensions/Weight Dimensions mm 2540 x 2156 x 2235Weight kg 1800Part No. 301 250

• Rigid machine base in a proven design, and meticulous workmanship

• Variability via swiveling and moving top beam• Perfectly adjustable dovetail guide on the X

axis, and wide square guides in Y and Z direction

• High-precision preloaded ball screws on all 3 axes

• All guides are hardened and ground, and are supplied with oil by the central lubrication unit

• Cutter head swivels with pneumatic tool clamping and powerful 3.7 kW motor

• Infinitely variable spindle speed with back gearing and LED speed indicator

• Manual quill feed with micrometer depth stop allows for precise angular bores

• Large, swiveling control panel with integrated position indicator

For the latest specials, visit www.knuth.de

13

D

Servomill® 1000

For more information and options, visit www.knuth.de

Mil

lin

g

Servo/conventional bed-type milling machine

Multipurpose Milling Machine

X.pos Plus Display - For increased productivity, quality and comfort

• Heavy cast-iron frame features a bed-type design • Large workpiece weights• Ground and hardened box-ways on Z and Y axis -

with high load capacity and wear-resistance• Low-maintenance, robust, and precise preloaded

ball screws on all axes• Supporting weight balance on Z axis ensures

smooth travel and minimal wear of drive and guideways

• Cutter head swivels ± 90° and quill can be moved automatically or manually

• Pneumatic tool clamping for quick tool changes • Digital speed indicator• Automatic lubrication system reduces

the operator's workload and simplifies maintenance

Specifications Servomill® 1000Working area X axis travel mm 1000Y axis travel mm 480Z axis travel mm 560Table setup area mm 1524 x 305Table load capacity (max.) kg 500Feed Feed speed mm/min 0 - 1000 (infinitely var.)Feed per spindle revolution mm/rev 0.01 - 1X axis rapid feed mm/min 5000Y axis rapid feed mm/min 3000Z axis rapid feed mm/min 2000

Vertical Cutter Head Spindle speed (infinitely variable, back gear ranges)

rpm

4000

Spindle mount ISO 40Quill stroke mm 125Drive capacities Main motor rating kW 3.7Voltage V 400 Dimensions/Weight Dimensions mm 2400 x 2100 x 2550Weight kg 1820Part No. 301 251

Standard Equipment: 3-axis position indicator, Electronic hand-wheels, pneumatic workpiece clamping, chip collector tray, LED work lamp, coolant system, automatic central lu-brication, horizontal guideway cover, operating tools, operator manual

Options Part No.• Oscillation element LT 55 (each) 103 322• Hydraulic vise HS 125 125 024

• Divider ST 130 110 960• Milling chuck set ISO 40 106 044• Clamping tools, assorted, De Luxe 16/M14 105 300

14

D

Servomill® UFM 6Servo-Conventional Universal Milling Machine - Superior machining quality and high reliability

Universal Milling Machine

For the latest deals, visit www.knuth.de

Standard Equipment: 3-axis position indicator, electronic hand-wheels, draw bar, chip tray, coolant system, central lubrication, work lamp, operating tools, operator manual

Options Part No.• Oscillation element LT 55 (each) 103 322• Hydraulic vise HS 125 125 024

Part No.• Milling chuck set ISO 40 106 044• Clamping tools, assorted, De Luxe 16/M14 105 300

• Rigid, heavy machine frame featuring proven knee-and-column design

• Wide, heavy square guides on Y and Z axis plus dovetail guides on X axis for maximum load capacity and lasting accuracy

• Guideways and gears are hardened and ground

• Vertical cutter head swivels and can easily be disassembled and handled via a machine-mounted bracket

• 7.5 kW main spindle drive and back gearing ensure a wide variable speed spectrum and high torque at the spindle

• Vconst on all 3 axes - tuned to spindle speed

Specifications Servomill® UFM 6 Working areaX axis travel mm 1300Y axis travel mm 290Z axis travel mm 450Table dimensions mm 1600 x 320Table load capacity (max.) kg 300T-slots (qty x width x spacing) mm 3 x 18 x 70Cutter headSpeed range rpm 60 - 360 / 360 - 1800Spindle mount DIN 2080 ST 40Spindle center-to-table distance mm 20 - 470Horizontal spindleSpeed range rpm 60 - 360 / 360 - 1800

Spindle mount DIN 2080 ST 50Spindle center-to-table distance mm 10 - 460FeedRapid feed X / Y / Z axis mm/min 5000 / 3000 / 1500Feed X / Y / Z axis mm/min 0 - 1000 (infinitely var.)

Drive CapacitiesMain drive motor rating kW 7,5Voltage V 400Dimensions/WeightDimensions mm 1900 x 2550 x 2100Weight kg 2350Part No. 301 253

15

D

Servomill® UWF 5

D

For more information and options, visit www.knuth.de

Mil

lin

g

Servo-Conventional Knee-and-Column Milling with Universal Swivel Head

Universal Milling Machine

• Extremely rigid machine-bed made of high-strength, ribbed HT-200 cast-iron

• Precision-ground guideways, surface hardened, for lasting precision and wear-resistance

• Quiet precision spindle gears with hardened and ground gears

• Powerful 7.5 kW horizontal spindle and heavy-duty top beam with outer arbor ensure excellent machining results when working with long cutter arbors

• Servo-conventional drives on all axes, infinitely variable with fast rapid feeds

• Preloaded ball screws on all axes ensure superior precision and long-term wear-resistance

Standard Equipment: 3-axis position indicator, electronic hand-wheels, reducing sleeves (ISO 50 / MT4), milling arbors (24, 32, 40 mm), collet chuck (ISO 50) incl. collets up to 16 mm (8-pc set), coolant system, work lamp, chip tray, draw bar,foundation bolts (M20 x 500 mm), operating tools, operator manual

Specifications Servomill® UWF 5 Working areaX axis travel mm 1300Y axis travel mm 290Z axis travel mm 450Table dimensions mm 1600 x 320Table load capacity (max.) kg 300T-slots (qty x width x spacing) mm 3 x 18 x 80Cutter headSpeed range (2) rpm 60 - 360

360 - 1800Spindle mount ISO 50Swivel range 360°Upper beam travel mm 550Spindle-to-table distance mm 200 - 590

Horizontal Milling SpindleSpeed range (2) rpm 60 - 360 / 360 - 1800Spindle mount DIN 2080 SK 50Spindle center-to-table distance mm 10 - 460FeedFeed X / Y / Z axis mm/min 0 - 1000 (infinitely var.)

Rapid feed X / Y / Z axis mm/min 5000 / 3000 / 1500Drive CapacitiesMain motor rating kW 7,5Voltage V 400Dimensions/WeightDimensions mm 2520 x 2100 x 2000Weight kg 2800Part No. 301 254

For available options for this machine, visit our website and search for Servomill® UWF 5 (product search)

Universal swivel head and horizontal spindle

16

D

Servomill® UFM 8 VCost-effective machining and intuitive control = servo-conventional

Universal Milling Machine

For the latest deals, visit www.knuth.de

Options Part No.• Oscillation element LT 55 (each) 103 322• Hydraulic vise HS 125 125 024

Part No.• Milling chuck set ISO 40 106 044• Clamping tools, assorted, De Luxe 16/M14 105 300

• Rigid frame design with wide guideways and travels

• Servo-conventional drives on all axes, infinitely variable with fast rapid feeds, synchronized with spindle speed

• Preloaded ball screws on X, Y and Z ensure high precision, low maintenance and low wear

• All gears and guideways are hardened and ground

• Swivelling vertical cutter head, pneumatic tool clamping and powerful 5.5 kW motor

• 2 gear steps for a wide speed range, infinitely variable up to 5000 rpm, and high torque at the spindle

• Horizontal spindle motor with 7.5 kW

Specifications Servomill® UFM 8 VWorking areaX axis travel mm 1300Y axis travel mm 290Z axis travel mm 450Top-slide travel mm 550Table dimensions mm 1600 x 320Table load capacity max. kg 300T-slots (qty x width x spacing) mm 3 x 18 x 80 FeedRapid feed X / Y / Z axis mm/min 5000 / 3000 / 1500Feed X / Y / Z axis mm/min 0 - 1000 (infinitely var.)Vertical Cutter HeadSpeed range (2) rpm 80 - 650 / 650 - 5000

Spindle mount DIN 2080 ST 40Horizontal Cutter HeadSpeed range (2) rpm 60 - 360 / 360 - 1800Spindle mount DIN 2080 ST 50Horiz. spindle-to-table surface dist. mm 10 - 460Spindle axis-to-top beam distance mm 245Drive CapacitiesMotor rating for horizontal spindle kW 7.5Motor rating for vertical spindle kW 5.5Dimensions/WeightDimensions mm 1900 x 2050 x 2500Weight kg 2400Part No. 301 255

Standard Equipment: 3-axis position indicator,electronic hand-wheels, pneumatic tool clamping, coolant system, work lamp, chip tray, draw bar, operating tools, operator manual

Cutter head swivels ± 45°

17

D

Servomill® UWF 10 • 12 • 15

For more information and options, visit www.knuth.de

Mil

lin

g

Servo-Conventional Drive Technology - rigidity, flexibility and large workspace

Universal Milling Machine

• Rigid, torsion-proof construction with dovetail guide on X axis, and wide square guides on Y and Z

• Large work table and long travels on all axes• All guides are hardened and ground, and are

supplied with oil by a central lubrication unit• Universal swivel head swings easily to a

horizontal position• Infinitely variable feed speeds and rapid feeds

can be synchronized to spindle speed by the push of a button

• Preloaded ball screw with zero backlash for easy and precise feeds

• Robust transmission with hardened and ground gears

Specifications Servomill® UWF 10 UWF 12 UWF 15Working areaX / Y / Z axis travel mm 900 / 650 / 450 1200 / 700 / 500 1400 / 700 / 500Table dimensions mm 1235 x 460 1600 x 500 2000 x 500Table load capacity (max.) kg 400 1500 1500T-slots (qty x width x spacing) mm 5 x 18 x 80 5 x 18 x 80 5 x 18 x 80Cutter headSpeed range (2) rpm 30 - 390 / 390 - 2050 30 - 390 / 390 - 2050 30 - 390 / 390 - 2050Spindle mount DIN 2080 ST 40 ST 50 ST 50Swivel range 360° 360° 360°Spindle-to-table distance mm 32 - 482 50 - 550 50 - 550FeedRapid feed X / Y / Z axis mm/min 5000 / 3000 / 1500 2200 / 2200 / 1100 2200 / 2200 / 1100X / Y axis feed mm/min 0 - 1000 (infinitely var.) 10 - 1000 10 - 1000Z axis feed mm/min 0 - 1000 (infinitely var.) 5 - 500 5 - 500Drive CapacitiesMain motor rating kW 7.5 11 11Dimensions/WeightDimensions mm 1832 x 2660 x 2100 2200 x 2500 x 2100 2600 x 2500 x 2100Weight kg 4000 4500 5000Part No. 301 256 301 257 301 258

Standard Equipment: 3-axis position indicator, electronic hand-wheels, chip tray, LED work lamp, central lubrication, coolant system, operating tools, operator manual

Servomill UWF 10® is shownFor available options for this machines, visit our website and search for Servomill® UWF 10, 12 or 15 (product search)

KNUTH Machines

LIVE

At our headquarters in Wasbek, at our branch in Denkendorf, and in our Cutting Center, we keep a large number of machines ready for demo. Make an appointment!

www.knuth.de

Test our servo-conventional machines

Make an appointment for a personal demonstration!Telephone 04321-6090 or visit info@knuth.de

KNUTHHeadquarters GermanySchmalenbrook 1424647 Wasbek / NeumünsterTel. +49 (0) 4321 - 609-0Mail info@knuth.de

KNUTH Southern GermanyAlemannenstraße 1985095 Denkendorf / IngolstadtTel. +49 (0) 8466 - 9419-0Mail verkauf-sued@knuth.de

KNUTH Cutting CenterHavelstraße 2524539 NeumünsterTel. +49 (0) 4321 - 609-131Mail c.busch@knuth.de V

0/E

N04

-201

6

KNUTH-Neutec Eastern GermanyZum Mühlenflies 815366 Neuenhagen / BerlinTel. +49 (0) 3342 - 2487-16Mail verkauf@knuth-neutec.de