Date post: | 07-Apr-2018 |
Category: |
Documents |
Upload: | tin-nguyen |
View: | 234 times |
Download: | 0 times |
of 28
8/4/2019 Conveying and Storing
1/28
W E C O N V E Y Q U A L I T Y
Conveying & Storingin the Cement
induStry
8/4/2019 Conveying and Storing
2/28
W E C O N V E Y
2
ContentS
4 AUMUND Group Equipment inthe Cement Industry
6 Clinker Transport
10 Conveying o raw meal,
cement and additives
12 Transport o raw material, clinker,
additives and cement
14 Hopper discharge and crushereeding
16 Proportional eeding, proportional
discharge
17 Silo and hopper discharge
19 Dust-tight transport
20 Material reception and transer
21 Clinker loading
22 Clinker storage & Clinker
discharge
24 Conversions & Reurbishments
25 Ater-Sales Service
26 Other AUMUND Group Equipment
in the Cement Industry
For the conveying and storage
technology AUMUND oers a
unique combination o:
Highesttechnicalstandard
System-solutionswithreliably
high grades o efciency and
proftability
Centralmanufacturewith
intra-plant quality assuring
systems
Sophisticatedassemblyand
start-up concepts under the
instructions o highly qualifed
supervisors
ConCePt And engineering
The guideline or the AUMUND concept is maximum customer beneft.
Adaptedtothecustomers
specifc requirements, all
transport processes are
constantly optimised on the
basis o innovations and the
latest technical know how.
Inordertocombineeconomical
and ecological aspects which
will also comply with uture
demands, economical and at
the same time ecologically
balanced solutions are
considered.
mAunuFACture & ASSemBLy
Company Headquarters in Rheinberg
8/4/2019 Conveying and Storing
3/28
Q U A L I T Y
3
t Aumund gp
Highsafetystandards
in all unctions and
under all conditions
with worldwide proven
technology, quality and
reliability.
Certicationaccording
to DIN ISO 9001
Patentsandnumerous
reerences in more
than 100 countries
Worldwide the products o the AUMUND
Group are being applied successully in
more than 10,000 plants.
The high standards AUMUND set
themselves in the felds o concept,
engineering, manuacture and assembly
are supported by a network o worldwide
ofces and representations.
The products are manuactured in own
acilities and locations o the Group.
Hong Kong
P.R. China
India
Dubai U.A.E.
RussiaSwitzerland
France
Germany
Great Britain
BrazilUSA
8/4/2019 Conveying and Storing
4/28
W E C O N V E Y
4
1
19 20 20 21 22 23 24
25
26
2 3 4 5 6
7
8
9
10
11
1. Limestone intake and transer to
stationary crusher (SAMSON
Feeder)
2. Storage and reclaim o shale/
clay (Portal Reclaimer)
3. Feeding pre-blending silos
(Bucket Elevator)
4. Distribution o limestone and
aggregates (En Masse Chain
Conveyor)
5. Discharge and reclaim o
limestone and aggregates
(CENTREX/Rotary Discharge
Machine)
6. Proportional eeding o raw mill
(Weigh Feeder)
7. Raw mill circulation (Bucket
Elevator)
8. Filter dust reclaim (En Masse
Chain Conveyor)
9. Raw meal silo eeding (Bucket
Elevator)
10. Reception and transer o
alternative uels (SAMSON
Feeder)
11. Raw meal eeding to pre-heater
(Bucket Elevator)
12. Clinker dust reclaim (En Masse
Chain Conveyor)
13. Clinker transport rom cooler to
storage (Pan Conveyor)
14. Automatic clinker discharge
(MOLEX)
15. Grab unloading (Eco-Hopper)
Aumund grouP equiPment in the Cement induStry
8/4/2019 Conveying and Storing
5/28
Q U A L I T Y
5
27 28 29 30 32
31
12
13
14 15
16
17 18
33 34 34
16. Truck loading o clinker
(Telescopic Spout)
17. Clinker intake and transer to
shiploader (SAMSON Feeder)
18. Clinker loading with Mobile
Shiploader
19. Link Conveyor with mobile ace
crusher
20. Limestone crusher reclaim
(Arched Plate Conveyor)
21. Limestone blending bed (Stacker/
Reclaimer)
22. Coal/petcoke unloading and
reclaim (Rotary Wagon Tipper)
23. Storage and reclaim o coal/
petcoke (Circular Stockyard)
24. Bucket elevator to coal mill
25. Proportional eeding o coal mill
(En Masse Chain Conveyor)
26. Coal dust reclaim (En Masse
Chain Conveyor)
27. Clinker storage in steel plate silo
28. Gypsum storage and reclaim
(CENTREX/Rotary Discharge
Machine)
29. Clinker transer to mill hoppers
(Pan Conveyor)
30. Discharge and reclaim o clinker
and additives (Silo Discharge
Gate/CENTREX/Rotary
Discharge Machine)
31. Distribution o clinker and
additives (Pivoting Pan Conveyor)
32. Cement mill eeding (Bucket
Elevator)
33. Filter dust reclaim (En Masse
Chain Conveyor)
34. Cement silo eeding (Bucket
Elevator)
8/4/2019 Conveying and Storing
6/28
W E C O N V E Y
6
CLinKer trAnSPort
deeP-drAWn PAn ConveyortyPe KZB
Deep-Drawn Pan Conveyors with transfer station
Pan Conveyor with Deep Drawn Pans Type KZB
Deep-Drawn Pan Conveyor - Detail
Inclinationupto30
When conveying hot,
abrasive cement clinker,
a trouble-ree operation
o the transport system is
decisive or the availability
o the whole system.
AUMUND Deep-Drawn Pan
Conveyors type KZB, stand
out or reliability and long
service lie.
KZB the economic
conveying system or the
transport o cement clinker
in 24-hours-operation
qualityassuredandcost-
effective,recognisedand
provenonallcontinents.
Conveyingheightsof
more than 130 m
Capacitiesexceeding
1,600 t/h Standardisedcomponents
Platewidthsfrom400to
2,400 mm
Stiffenedsideplates
Contactlessoverlapping
o the plates
Chainbreakingloadsofup
to 3,000 kN/chain strand
8/4/2019 Conveying and Storing
7/28
Q U A L I T Y
7
Silo feeding with steep-angle conveyor
Inclinationupto45
Standard Deep-Drawn Pan
Conveyors rom AUMUND
orm the basic components
o the steep-angled clinker
conveyors, which are applied
successully and economi-
cally or inclination angles
up to 45.
The standard chain
program allows
conveyingheights
ofupto120m so
that in case o a
corresponding plant
design clinker silos may
be ed with only one
conveyor.
Stabilisedbafes
Avoidingspillageby
baferecesses
Capacitiesto1,100t/h
PAn Conveyor With deePdrAWn PAnS And BAFFLeS
tyPe KZB-q
Pan Conveyor with baffles
KZB-Q inclined at 45 degrees
8/4/2019 Conveying and Storing
8/28
8/4/2019 Conveying and Storing
9/28
Q U A L I T Y
9
Pivoting PAn ConveyortyPe SPB
Feedingmultiplehoppersandsilos
Important AUMUND developments have
turned the Pivoting Pan Conveyor type SPB,
into an efcient instrument o automation
or the installation o economic transport
systems.
I more than two silos are to be ed, the
AUMUND Pivoting Pan Conveyor is the
best solution.
Automatedfeedingofclinkersilosand
mill hoppers
Remote-controlled
Severalintermediatedischarges
Systemlengthof400mandmorerealised
Simultaneousconveyingofdifferentbulk
materials in the upper and lower run
Lowmaintenancerequirement
Minimumenergyconsumption
Longservicelife
Feeding two silos in line
Mill hopper feeding
8/4/2019 Conveying and Storing
10/28
W E C O N V E Y
10
Conveying oF rAW meAL, Cement And AdditiveS
BuCKet eLevAtor WithSteeL-reinForCed BeLttyPe BWg Automaticparalleltensioning
AUMUND Belt Bucket Elevators
type BWG, with automatic paralleltensioning device are applied or the
conveying o cement, raw meal or
other dusty additives.
For pre-heater eeding, lits to 175 m
and conveying capacities o more
than 1,850 m/h have been achieved
with AUMUND belt bucket elevators.
Conveyingheightsto175m
Conveyingcapacitiesofmore
than 1,850 m/h
Continuousreceiptanddischargeo conveying material by means o
tight bucket sequence
Optimumdischargeconditions
Continuousoperationwith
low-maintenance requirement
Standardsafetyequipment:
level control, o-track monitoring,
speed monitor
As traction element textileorsteel
reinforcedbeltswith longitudinal
and crosswise stabilizing steel cords
are used depending on the load situ-
ation. AUMUND provides the belt
endswithspecialclampcon-
nections consisting o aluminium
profles with spring-loaded screwconnections. The rope ends o the
steel reinorced belt are cast addi-
tionally with an artifcial resin mass.
As a standard, the drive pulleys
are equipped with exchangeable
riction lining elements with diamond
pattern, thus enabling the exchange
o the segments without opening the
belt. A parallel toothed rack guided
tensioning device provides the
automatic belt tension and prevents
o-track running.
Silo and pre-heater feeding Drive pulley
8/4/2019 Conveying and Storing
11/28
Q U A L I T Y
11
Individualsystemsfordifferent
conveying materials
Conveyingmaterialtemperatures
up to max. 130C Hightensilestrengthbymeans
o steel cord abric
Creepingdriveformaintenance
purposes
Pre-heater feeding
Belt Bucket Elevators handling raw meal
8/4/2019 Conveying and Storing
12/28
W E C O N V E Y
12
trAnSPort oF rAW mAteriAL,CLinKer, AdditiveS And Cement
BuCKet eLevAtor With CentrAL ChAintyPe BWZ
Reducingvibrations
Preventingcrackformation
Longservicelife
High conveying capacities due to a
tight bucket sequence and buckets
up to 1,200 mm width are the char-
acteristic eatures o the AUMUND
Bucket Elevator type BWZ, with
orged central chain.
The bucket fxing which AUMUND
realises by means o angular brack-
ets with patented loose setting
between chain bolts and angular
brackets, reduces vibrations and thus
prevents crack ormation at bucket
walls and welding seams.
The chain with lubricated labyrinth
sealings contributes to long service
lives.
Conveyingcapacitiesofmore
than 900 m/h
Conveyingheightsto90m
Longservicelifeevenin
case o continuous operation
Forgedcentralchainwithlargely
dimensioned joint suraces
Heat-resistantincontinuous
operation, designed to with-
stand short material tempera-
ture peaks o up to 400C
Driveringandtensionchain
wheel in segments
Creepingdrivefor
maintenance purposes
Wideapplicationrange
Bucket Elevator for silo feeding Central Chain
8/4/2019 Conveying and Storing
13/28
Q U A L I T Y
13
douBLe BuCKet eLevAtortyPe BWZ-d
Conveyingcapacitiesofmorethan
1,800m/h
Capacitydependantconveying
heightsover60m
Highoperationalreliability
Robustdesign
Higher kiln capacities and new grindingprocesses in the cement industry require Bucket
Elevators with high conveying capacities and
center distances.
AUMUND Double Bucket Elevators type
BWZ-D, are the appropriate solution or the
actual requirement.
By means o the structural arrangement o two
central chains in one casing and the resulting
increase in capacity, the double confguration is
especially suitable as circulating Bucket Elevator
in grinding plants.
Head of Double Bucket Elevator with double drive and two bucket strands
Silo feeding
8/4/2019 Conveying and Storing
14/28
W E C O N V E Y
14
hoPPer diSChArge And CruSher Feeding
ArChed PLAte Conveyor
tyPe BPB And BPB-S/SF Functionalsolution
Simplescrapingoffofstickymaterials
For the transport o humid, sticky materials, such as
clay, gypsum, anhydrite, puzzolana and marl, Arched
Plate Conveyors type BPB, have become accepted as
unctional solution. The plates bent in arched shape
as their name says allow a simple scraping o o
sticky materials.
Heavy plate conveyors o type BPB-S or SF are
applied in quarries, when blast limestone and other
raw materials with up to 1,000 mm edge length are to
be ed to the crusher.
The conveyors are equipped with orged chains and
wear-resistant components. The plate elements, chain
sizes and roller designs are confgured according to
the related task and required conveying capacity.
Loading and unloading station
Hopper discharge type BPB
Workshop assembly type BPB-SF
Arched Plate Conveyor type BPB-SF
8/4/2019 Conveying and Storing
15/28
Q U A L I T Y
15
Armoured ChAin ConveyortyPe PKF
Severaloverallwidths
Adaptationtogivenhoppergeometries
The Armoured Chain Conveyor type PKF, is used as hopper
discharge equipment or crushed limestone or or sticky raw
materials, such as chalk, gypsum, clay or raw coal.
Dischargecapacitiesof10toover1,200t/h
Overallwidthsfrom600upto2,600mm
Tractionforcesupto680kN/chainstrand
Twotovestrandversionsdependingonthehopperwidth
Lowoverallheight
The Armoured Chain Conveyor conveys in the upper run so
that the conveyor trough orms the bottom o the hopper.
Several overall widths permit in each case the most avourable
adaptation to given hopper geometries, while the low overall
height also enables a subsequent installation into existing
conveyors.
Hopper discharge with Armoured Chain Conveyor
Armoured Chain Conveyor type PKF
8/4/2019 Conveying and Storing
16/28
W E C O N V E Y
16
ProPortionAL Feeding, ProPortionAL diSChArge
APron Weigh FeedertyPe dPB
Proportionalfeeding
Proportionaldischarge
The Apron Weigh Feeder is applicable or the propor-
tional eeding and the proportional dischargeo a wide variety o bulk materials.
For proportional reclaim o bulk materials with poor
owpropertiessuchasClay,Gypsum,Marl,Limestone,
Puzzolana etc. the Apron Weigh eeder eatures arched
plates especially designed or cohesive materials.
Proportional eeding o dusty, grained bulk materials
such as Clinker, Slag Sand and Petcoke is perormed
with the Apron Weigh Feeder eaturing deep-drawn pans.
This version o a pan-type weigh eeder is especiallysuitable or the proportional eeding o the cement mill
with clinker.
For mill eeding the Apron Weigh Feeder is also available
as completely enclosed and pressure-proo design.
Apron Weigh Feeder with arched plates Proportional feeding of additives
Mill feedingApron Weigh Feeder with deep drawn pans
8/4/2019 Conveying and Storing
17/28
Q U A L I T Y
17
SiLo And hoPPer diSChArge
CentreXtyPe CtX-Ad/Av/i
Trouble-freedischarge
Continuousmaterialow
Compactandrigiddesign
Trouble-ree discharge o sticky and cohesive materials
withpoorowproperties,suchasFGDornaturalgyp-
sum with high moisture content.
The logarithmically shaped discharge arm conveys the
bulk material radially rom the silo wall towards under-
neath the inner cone where it is discharged throughthe centrally located outlet. The discharge arm reaches
into the material rom underneath the material column,
undercutting the silo outside wall to prevent material
caking and dead zones. Thus, a continuous lowering o
the entire hopper content is achieved. Segregationand
bridgingareprevented.
On account o its compact and rigid design, the
CENTREX is an idealsolutionforinstallationinto
orunderneathexistingsilosorhoppers. Three basic
alternatives are available within the CENTREX system:
CENTREXwithexternaldriveandrotating
inner cone type CTX-AD
CENTREXwithexternaldriveandstationary
inner cone type CTX-AV
CENTREXwithinternaldrivetypeCTX-I
CENTREX for discharge of natural gypsum and trass
Internal drive CENTREX with internal drive
8/4/2019 Conveying and Storing
18/28
W E C O N V E Y
18
Reliabledischarge
Rotary Discharge Machines ensure the reliable dis-
charge o a wide variety o dierent additives or raw
materials such as:
Limestone,marlordolomitestone
NaturalandFGD-gypsum
Coal
The threedesign alternatives o the discharge machineallow its adaptation to completely dierent applications:
For the dischargefromlongitudinalhoppersoraline
ofsilos,theatandlowproledesignvariantisused,
while the rotating discharge machine is applied or the
dischargefromcylindricalsilos.
For the specifc control o the reclaim capacity and or
blending the additives when the machine is used in the
mill eeding section, the block design model can be
additionally equipped with a weigh eeder which comes
ully integrated into the mobile discharge machine. On
account o the homogenous, volumetric reclaim process,
the Weigh Feeder allows to reach an accuracy o +/- 1%.
rotAry diSChArgemAChinetyPe BeW
The rotating discharge machine guarantees a trouble-
ree reclaim o material rom concrete or steel silos o up
to 12 m diameter, oering an adjusting range o 1:10.
Firstin/Firstout
Simultaneousfeedinganddischarge
Proportionalreclaim
BEW-BL in block design BEW-FL in low profile design
BEW-K Rotating discharge machine
8/4/2019 Conveying and Storing
19/28
Q U A L I T Y
19
duSt-tight trAnSPort
en mASSe ChAin ConveyortyPe tKF
Especiallywear-resistantdesign
Ensuresauniformmaterialow
Controlledfeedingcapacities
For conveying, distributing, and reclaiming cement and flter dusts
as well as coal and additives such as gypsum, anhydrite, sand or
limestone.
In especially wear-resistant design the Chain Conveyor is also usedto convey cement clinker.
Enclosedconveyingpath,reduceddedustingeffort
Intermediatedischargethroughelectro-mechanicallydrivengates
Wear-resistantchainsforalongservicelife
Conveyingcapacityupto500t/h
Lengthupto50m
Shock-pressureproofdesignasanoption
For coal mill eeding applications, all Chain Conveyors come in a
design which is shock-pressure proo up to 3.5 bar on a standard
basis. Additionally, such Chain Conveyors eature a double-strand
chain. A variable speed drive with requency converter ensures a
uniformmaterialowandacontrolledfeedingcapacity.
Chain Conveyor in shock-pressure proof design for coal mill feeding
Single-Strand Chain Conveyor as filterdischarge conveyor with gravity chain
tensioning
Chain Conveyor for handling limestone
8/4/2019 Conveying and Storing
20/28
W E C O N V E Y
20
mAteriAL reCePtion And trAnSFer
SAmSon SurFACe Feeder
SAMSON - Transfer of additives
The ideal solution or the reception o all bulk materials
in the cement industry such as cement clinker, coal and
pet-coke, clay, limestone, gypsum rock, FGD gypsum,
granulated slag, alternative uels.
Where materials are imported to cement plants by tipping
or dump trucks and transerred to the next process stepthe SAMSON Feeder oers an economical alternative to
conventional and expensive underground pits and hoppers.
Surace installation eliminates costly permanent civil
engineeringworksandallowsgreaterexibilityinplant
layout regardless o local ground conditions.
Since the SAMSON is a single integrated
machine it may be easily re-located to
accommodate plant development.
The SAMSON is available in dierent series
designed or a specifc range o applications.
Holding capacities up to 300 tons may be
provided with a controlled rate discharge.
SAMSON Surface Feeder - for crusher feedingin a quarry
Fasttruckdischarge
Nobridgingregardlessofmaterialhandling
characteristics
Minimumdustgeneration
Easyaccessformaintenance
Flexibilityinlocationandrelocation
ReducedenergydemandandoperatingcostMinimuminvestmentrisk
The Samson concept
8/4/2019 Conveying and Storing
21/28
Q U A L I T Y
21
CLinKer LoAding
teLeSCoPiC SPout
tyPe tS Integraldustcontrol
Lowandheavydutyoperation
The AUMUND Telescopic Spout with integral dust con-
trol ensures the loading o clinker into trucks, barges or
ships, oering an economic solution or low and heavy
duty operation.
The heavydutyversion o the telescopic spout is
designed or rapidly successive loading cycles and high
capacitiesofupto700t/h. This system is used in
more than 200 installations worldwide.
Applications with approximately fve loading cycles per
day and loading capacitiesof100t/hto150t/hare
theidealeldfortheapplicationofthelowduty
design. Due to the diminished segments, the smaller
hoist and the reduced dedusting volume, this system is
the economical solution or installations requiring a low
or medium handling capacity.
Ship loading Truck loading
8/4/2019 Conveying and Storing
22/28
W E C O N V E Y
22
CLinKer StorAge
Concrete silo with steel roof
Design, implementation and modernization o clinker
storage installations, customised as per requirements.
Cylindricalsteelplatesilos
Specialdesignforextremelylargestoragevolumes
Concretesilowithsteelroof
Circularstoragehallwithsteelroof
Circularstoragehallwithconcretewall
and steel roo
Toreceiveanoptimumoverallconveying
andstoragelayout,earlyimplementationof
experiencedlayoutengineersisrecommended.
CLinKer diSChArgeSiLo diSChArge gAtetyPe SAK
The design principle o the silo discharge gates
prevents the ree all o the clinker onto the
discharge conveyor. The low throughput rate,
corresponding to the discharge rate o the pan
conveyor, eectively avoids dust generation
(gravity principle).
Thesystematicalternatingbetweenthesilo
dischargegatesensuresauniformdischarge
oftheclinkeroverthewholesilobasis.
Clinker storage hall with concrete wall and steel roof
Gravity silo discharge
8/4/2019 Conveying and Storing
23/28
Q U A L I T Y
23
AutomAtiCCLinKer diSChArgetyPe moLeX
Successfullyoperating
Lowerinvestment
Loweroperatingand
maintenancecosts
The discharge system MOLEX is the
successor o the residue-ree discharge
systemMOLEwhichissuccessfully
operating in several cement plants.
The MOLEX operates in the same way as
the proven predecessor with the dierence
that no central column is required and the
housing structure o the discharge unit
is protected rom the load o the clinker
stockpile by a concrete garage.
Largeractivestock
Upto97%clinkerreclaim
Availabilityofclinkerevenduringyearlykiln shutdown
Blendingofoldandfreshclinker
Blendingofcoarseandne-grained
clinker
Almostconsistentclinkermixtureformill
eeding
Lower investment and/or operating and
maintenance costs are the result o:
Reductiontoonlyonereclaimtunnel Lessconveyorsanddischargegates
Reducedstoragevolume,asupto97%of
the volume is active and can be reclaimed
Noresiduestocktoberemovedwith
loading shovels
Version with central column
Scraper chain drive
Covered stockpile with automatic discharge
8/4/2019 Conveying and Storing
24/28
8/4/2019 Conveying and Storing
25/28
Q U A L I T Y
25
AFter-SALeSServiCeS
CustomerProximityaroundtheWorld
At AUMUND, service does not end at the sale o the
equipment.Itsthebeginningofalong-termpartnership.
AUMUND oers you a ull range o services rom
commissioning to the delivery o quality spare and wear
parts to customized preventive maintenance programs
and equipment upgradings. The benefts or you:
Maximum equipment efciency at lower operating costs.
CommissioningandFieldService
Today, presence on the spot is an absolute must.Thereore, our commissioning and service engineers
operate rom support centers on all continents to
guarantee immediate and competent support.
SpareandWearParts
A comprehensive range o genuine spare parts is
available or our entire product range rom stocks
in Germany, Great Britain and the USA. Our product
specialists provide assistance and respond instantly.
RetrotsAged and worn equipment? Capacity increase needed?
Too high operating cost? Aumund just as new retrofts
are economical and tailor-made solutions or improving
your existing equipment at reasonable cost.
PreventiveMaintenance
Knowing beorehand that service will be needed allows
you to schedule downtime and save money with timely
repairs. Repairs or retrofts can be accurately anticipated
allowing or the downtime to be at the most convenient
times and at the lowest possible cost.
8/4/2019 Conveying and Storing
26/28
W E C O N V E Y
26
other Aumund grouP equiPmentin the Cement induStry
StoCKyArdteChnoLogy
Portal,bridge-typeor
cantileverreclaimers
Longitudinalstockyards
andblendingbeds
Fixedandmobilestackers
Waggontippers
Circularstockyardsandblendingbedswithportal,
semi-portal,bridge-type
orcantileverreclaimer
BuLK mAteriALimPort AndeXPort Eco-Hopper
MobileShiploaders
Stormajor
MobileLinkConveyors
Bridge Scraper Reclaimer for limestone
Mobile Shiploader with Samson Feeder handling clinker for export
8/4/2019 Conveying and Storing
27/28
Q U A L I T Y
27
the Aumund grouP
Stacker & Bridge Scraper Reclaimerin circular storage for limestone
Cantilever Scraper Reclaimer for additiveand corrective material
Unloading hoppers for clinker and additives
Stormajor handling pet-coke
GERMANY
AUMUNDFrdertechnikGmbHSaalhoer Str. 1747495 RheinbergPhone: +49 - 2843 - 72 0Fax: +49 - 2843 - 6 02 70e-mail: [email protected]
AumundLogisticGmbHSaalhoer Str. 1747495 Rheinberg
Phone: +49 - 2843 - 72 0Fax: +49 - 2843 - 7 24 73e-mail: [email protected]
SCHADELagertechnikGmbHDorstener Strae 36044653 HernePhone: +49 - 2325 - 58 74 0Fax: +49 - 2325 - 58 74 74e-mail:[email protected]
GREATBRITAIN
B&WMechanicalHandlingLtd.
Gemini House CambridgeshireBusiness Park, 1 Bartholomew`s WalkEly, Cambridgeshire CB7 4EAPhone: +44 - 1353 - 665 001Fax: +44 - 1353 - 666 734e-mail: [email protected]
INDIA
AUMUNDEngineeringPrivateLtd.2nd Floor, Lakshmi Neela Rite ChoiceChambers 9, Bazulla Road,T. Nagar Chennai - 600 017Phone: +91 - 44 - 4393 63 00Fax: +91 - 44 - 2815 60 46e-mail: [email protected]
HONGKONGSAR
AUMUNDAsia(H.K.)LimitedSuite 1301, Oxord House,Taikoo Place, 979 Kings Road,Quarry BayHong KongPhone: +852 - 3695 - 43 33Fax: +852 - 3695 - 43 11e-mail: [email protected]
DUBAIU.A.E.
AUMUNDFrdertechnikGmbHRepresentativeOfceP.O. Box 35291Dubai, UAE
Phone: +971 - 4 - 2823762e-mail: [email protected]
THENETHERLANDS
AUMUNDHoldingB.V.Wilhelminapark 405911 EE VenloPhone: +31 - 77 - 320 01 11Fax: +31 - 77 - 320 07 28e-mail: [email protected]
SWITZERLAND
AUMUNDAGArther Str. 3
6301 ZugPhone: +41 - 41 - 710 10 82Fax: +41 - 41 - 710 42 02e-mail: [email protected]
RUSSIA
AUMUNDRepresentativeOfceGerman-Russian House, Ofce 44ul. Malaja Pirogovskaja 5119435 Moscow / RussiaPhone: +7 - 495 - 287 90 02Fax: +7 - 495 - 287 90 06e-mail: [email protected]
FRANCE
AUMUNDFranceS.A.R.L.43, rue de Trvise F 75009 ParisPhone: +33 - 1 - 42 46 72 72Fax: +33 - 1 - 42 46 72 74e-mail: [email protected]
BRAZIL
AUMUNDLtda.Rua Haddock Lobo, 337 - 11. andar01414-001 So Paulo, SPPhone: +55 - 11 - 3059 0160Fax: +55 - 11 - 3059 0161e-mail: [email protected]
USA
AUMUNDCorporation
1825 Barrett Lakes BoulevardBarrett Lakes Center IISuite 520Kennesaw, GA 30144Phone: +1 - 770 - 226 - 95 78Fax: +1 - 770 - 953 - 48 44e-mail: [email protected]
P.R.CHINA
AUMUNDMachineryTrading(Beijing)Co.Ltd.Rm. 7-8, 22-F, East Ocean CentreNo. 24 Jianguomenwai AvenueChaoyang DistrictBeijing 100004Phone: +86 - 10 - 65 15 58 13 / 14
Fax: +86 - 10 - 65 15 58 15e-mail: [email protected]
8/4/2019 Conveying and Storing
28/28
W E C O N V E Y Q U A L I T Y
www.aumund.com
AUMUND Headquarters in Rheinberg, Germany
Your partner or all requirements regarding material
handling and storage.We design, engineer, manuacture, erect and service
reliable equipment.
Reputation and competence proven by more than
10.000 installations in over 100 countries.
GB
Technicaldatasubjecttochangewithoutnotic
eA-GB-04-XI/11-MA.2
011byAUMUNDF
rdertechnikGmbH.Allrightsreserved.