55
Reg. No. 059-A ISO 9001 - 2000
Reg. No. 059-A
ISO 9001 - 2000
Real Wood
Ceramic
Fiber cement
CONWOOD
Concrete
• Strong and high durability
• Low Workability
• High Workability
• Low Durability
WHAT IS CONWOOD ?
“CONWOOD” Green Technology
Cement + Fiber Cellulose
• Strong and high durability
• High Workability
Decorative Panel
Lap siding
Eave
Lath
Deck
Stairs
CONWOOD PRODUCTS
siding
Mould
Product Color Thickness
(mm) Width (mm)
Length (mm)
Weight (kg)
Eave 6” Cream 16 152 3050 9.00
Eave 8” Cream 16 203 3050 12.06
1.CONWOOD EAVE
Product Color Thickness(mm) Width (mm) Length (mm) Weight (kg)
Eave 2 in 1 Cream/Naked 22 235 3050 17.56
• Straight without bending
• Grain surface & cutting edge at the bottom
• Dimension look like natural wood
• Weather resistance
• Easy installation
• Cost saving & time saving
• Span of structure reach 1.20 m.
• 0.32 piece / 1 m.
CONWOOD EAVE 2 in 1
CONWOOD EAVE 2 in 1
Product Color Thickness (mm)
Width (mm)
Length (mm)
Weight (kg)
Lath 3” cut Cream 11 76 3050 3.22
2.CONWOOD LATH
Lath 3”cut
Installation Of Lath Application
Wooden frame structure
Steel frame structure
40 cm.
Conwood Lath 3” cut with Paint Oak Shade
Product Color Thickness(mm)
Width (mm)
Length (mm)
Weight (kg)
Moulding 4” Louis/Classic/Modern
Cream 14 102 3050 5.20
Classic
Louis
Modern
CONWOOD MOULD
CONWOOD MOULD
Product Color Thickness(mm)
Width (mm)
Length (mm)
Weight (kg)
Lap Siding BG Cream 11 152 3050 6.44
CONWOOD Lap Siding
Lap Siding
Installation Of Lap siding Application
Wooden or Steel frame structure which spacing 60 cm.
CONWOOD Lap siding
Nail or Screw can be used to fix CONWOOD with frame structure
The picture of CONWOOD Lap Siding installation
Product Color Thickness(mm)
Width (mm)
Length (mm)
Weight (kg)
Siding Cream 8 152 3050 4.69
CONWOOD Siding
CONWOOD SIDING
Conwood Lap Siding G-Series ( G0,G1,G2 )
Product Color Thickness (mm.)
Width (mm.)
Length (mm.) Weight (kg.)
Conwood Lap Siding G0 Primer 11 200 3050 9.04 Conwood Lap Siding G1 Primer 11 200 3050 8.88
Conwood Lap Siding G2 Primer 11 200 3050 8.71
G0
G1
G2
Product Color Thickness(mm)
Width (mm)
Length (mm)
Weight (kg)
Decorative Panel Natural 11 600 1200 9.80
CONWOOD Decorative Panel
Decorative Panel
CONWOOD DECORATIVE PANEL
Installation Of Conwood Decorative Panel
1 cm spacing between joining
1 cm spacing between joining
Wooden or steel frame structure with spacing 60 cm.
Decorative Panel
Used nail or screw for installation
Product Color Thickness(mm)
Width (mm)
Length (mm) Weight (kg)
Deck 4”
Natural
25 101 3050 9.76
Deck 6” 25 152 3050 14.64
Deck 8” 25 203 3050 19.52
CONWOOD DECK
Deck 8”
CONWOOD DECORATIVE DECK
CONWOOD DECORATIVE DECK
INSTALLATION OF CONWOOD DECK
CONWOOD DECK
Reinforced Concrete Slab Slop 1:100 Fixing with screws
length = 2.5 inch
Notice: Should avoid to use this product at the flood area
For steel or wooden frame 20 x 20 cm. Point load is less than 150 KG
CONWOOD DECK 12’’
D1 D2 D3
Product Color Thickness (mm) Width (mm) Length (mm) Weight (kg)
Deck 12‘’ Naked 25 300 3050 28.75
• Possible to install on structure (wood, iron)
• 1.07 piece / 1 sq.m.
CONWOOD SUNSHADE
Product Color Thickness(mm)
Width (mm)
Length (mm) Weight (kg)
Sunshade Cream 14 76 3050 4.1
A type Horizontal
1 side grain surface
Installation Guide
B type Vertical 1 side 1 side grain surface
C type Vertical 2 sides 2 sides grain surface
D type 45 degree 1 side grain surface
CONWOOD Fence-Botany
Product Color Thickness(mm)
Width (mm)
Length (mm) Weight (kg)
Fence-Botany Primer 16 100 1000 1.99
Fence-Botany Primer 16 100 1500 2.98
Lattice which applied by Eave and Lath 3”cut
Lath 3”cut
Eave
Sunshade by Eave 8”
Eave
Curving wall which applied by Lath 3”cut
• แผงบังตา ประยุกต์โดยใช้ไม้ระแนงคอนวูดตัดชิ้น หน้า 3 นิ้ว ตีเว้นร่อง 2 นิ้ว โดยมีโครงคร่าวระยะ 40 ซม.
• ปริมาณการใช้ = 2.7 แผ่น/ตร.ม. Sunshade which applied by Lath 3”cut
Applied by Lath 3”cut
Deck
Sinaran Condominium, Taman Tun Dr. Ismail. P.J.
The Olive Condo at Subang Jaya
Conwood Fencing at Ara Damansara
KL Sentral Park
Maritime Museum at Sentosa Singapore
