Barrier BridgeSolution For Dividing CablesAt IntersectionsCTBB-11
2
The Barrier Bridge Solution
Cooper B-Line is proud to introduce the Barrier Bridge, a solution for keeping cable runsdivided at horizontal tees and crosses. Cables are separated for code compliance, protection,and organization. Keeping cables separate at fittings has always been a challenge, but theprocess is now simplified with the Barrier Bridge.
Benefits of the product include:
• Code Compliance:Eliminate questions on the jobsite with an obvious and visible solid metal barrierbetween cable types.
• Cable Protection:Minimize the potential for signal interference at the weakest link – the intersection.
• Design Simplicity:Make your design intention clear with available CAD details, template specifications,and submittal data sheets.
• Labor Savings:Speed up your installation by having a plan for intersections and having the rightpieces and parts for each fitting.
In addition, the Barrier Bridge solution offers thefollowing features:
• Slots for easy attachment of cable ties
• Raised sides of top level to retain cables
• Smooth, hemmed edges to protect cable
• Pre-engineered products for two (2) orthree (3) cable runs
• Installation steps that use standard tools
For additional information,visit www.cooperbline.com
or call 800-851-7415
3
Table of Contents
Barrier Bridge Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Barrier Bridge Component Numbering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Horizontal Tee, Two Cable Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
Horizontal Tee, Three Cable Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Horizontal Cross, Two Cable Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Horizontal Cross, Three Cable Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4
Barrier Bridge ComponentsThe Barrier Bridge System is made up of four key components: the Elevation Brace, the Cable Bridge,
the Straight Section Barrier, and Hardware Kit(s).
Cable Bridge
Elevation Brace Hardware Kit
Straight Section Barrier*
* Straight Section Barrier information can be found in the Cable Tray Systems catalog.
To build a Barrier Bridge, you need to know about your cable tray and your cable runs. Most of the
information is already known when you order your tray system.
Here is what you need to know:
Use the tables on pages 6 through 13 to select your parts. Also select a hardware kit from page 14.
Cable Tray
• Height or Loading Depth• Material• Width• Fitting Type (HT / HX)• Fitting Radius
Cable Runs
• Number of Runs• Approximate Width and Relative
Location of Each Run
5
Barrier Bridge Component Numbering System
Cooper B-Line Sales Engineers are available to assist you in selecting parts for a Barrier Bridge System.
Phone (800) 851-7415 ext. 366
Elevation BraceThe Elevation Brace divides the lower level of cables, much like a standard divider/barrier strip.It also supports the Cable Bridge.
7 3 A - EB 24
Cable Tray Loading Depth Material Elevation LengthBarrier 3 = 3” (76mm) (4” Siderail) A = Aluminum Brace 24 = 24” (609mm)
4 = 4” (101mm) (5” Siderail) P = Pre-Galvanized 60 = 60” (1524mm)
5 = 5” (127mm) (6” Siderail) G = Hot Dip6 = 6” (152mm) (7” or 8” Siderail) Galvanized
SS6 = Stainless SteelType 316
Cable BridgeThe Cable Bridge supports and retains the upper level of cables.
7 3 A - 12 - CB 20
Cable Tray Loading Depth Material Bridge Width Cable LengthBarrier 3 = 3” (76mm) (4” Siderail) A = Aluminum 03 = 3” (76mm) Bridge 05 = 4.5” (114mm)
4 = 4” (101mm) (5” Siderail) P = Pre-Galvanized 06 = 6” (152mm) 08 = 7.5” (190mm)
5 = 5” (127mm) (6” Siderail) G = Hot Dip 09 = 9” (228mm) 11 = 10.5” (267mm)
6 = 6” (152mm) (7” or 8” Siderail) Galvanized 12 = 12” (305mm) 14 = 13.5” (343mm)
SS6 = Stainless Steel 18 = 18” (457mm) 17 = 16.5” (419mm)
Type 316 24 = 24” (609mm) 20 = 19.5” (495mm)
30 = 30” (762mm) 23 = 22.5” (571mm)
36 = 36” (914mm) 26 = 25.5” (648mm)
42 = 42” (1067mm) 29 = 28.5” (724mm)
32 = 31.5” (800mm)
35 = 34.5” (976mm)
38 = 37.5” (952mm)
44 = 43.5” (1105mm)
50 = 49.5” (1257mm)
53 = 52.5” (1333mm)
6
Horizontal Tee, Two Cable Runs
Use the table on page 7 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray. Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled with the radius of your fitting.The box contains both the quantity and the catalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
Cable Bridgefor ‘B’ Run
Elevation Brace
Tee Fitting
Straight Section Barrier
7
Horizontal Tee, Two Cable Runs
Tray ‘A’ Larger ‘B’ Smaller RadiusWidth Description Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
6” 2 runs 03 03 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14(152mm) 03" and 03" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24
2 runs 06 03 (1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB179” 06" and 03" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24
(228mm) 2 runs 03 06 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB11 (1) : 7 # *-18-CB1403" and 06" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24 (3) : 7 # *-EB24
2 runs 03 09 (1) : 7 # *-03-CB17 (1) : 7 # *-06-CB17 (1) : 7 # *-09-CB17 (1) : 7 # *-12-CB2003" and 09" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (3) : 7 # *-EB24 (2) : 7 # *-EB24
12” 2 runs 09 03 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB11 (1) : 7 # *-18-CB11 (1) : 7 # *-24-CB14(305mm) 09" and 03" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24 (3) : 7 # *-EB24
2 runs 06 06 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB14 (1) : 7 # *-18-CB1706" and 06" (2) : 7 # *-EB24 (2) : 7 # *-EB24 (2) : 7 # *-EB24 (3) : 7 # *-EB24
2 runs 12 06 (1) : 7 # *-06-CB1412" and 06" (2) : 7 # *-EB24
18” 2 runs 06 12 (1) : 7 # *-12-CB08(457mm) 06" and 12" (2) : 7 # *-EB24
2 runs 09 09 (1) : 7 # *-09-CB1109" and 09" (2) : 7 # *-EB24
2 runs 18 06 (1) : 7 # *-06-CB2018" and 06" (2) : 7 # *-EB24
24” 2 runs 06 18 (1) : 7 # *-18-CB08(609mm) 06" and 18" (3) : 7 # *-EB24
2 runs 12 12 (1) : 7 # *-12-CB1412" and 12" (2) : 7 # *-EB24
2 runs 24 06 (1) : 7 # *-06-CB2624" and 06" (2) : 7 # *-EB24
2 runs 06 24 (1) : 7 # *-24-CB0830” 06" and 24" (3) : 7 # *-EB24
(762mm) 2 runs 18 12 (1) : 7 # *-12-CB2018" and 12" (2) : 7 # *-EB24
2 runs 12 18 (1) : 7 # *-18-CB1412" and 18" (3) : 7 # *-EB24
2 runs 30 06 (1) : 7 # *-06-CB3230" and 06" (2) : 7 # *-EB24
2 runs 06 30 (1) : 7 # *-30-CB0806" and 30" (3) : 7 # *-EB24
36” 2 runs 24 12 (1) : 7 # *-12-CB26(914mm) 24" and 12" (2) : 7 # *-EB24
2 runs 12 24 (1) : 7 # *-24-CB1412" and 24" (3) : 7 # *-EB24
2 runs 18 18 (1) : 7 # *-18-CB2018" and 18" (3) : 7 # *-EB24
# = Loading Depth of Tray System – 3", 4", 5", 6"* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)(1, 2, 3, 4 or 5) = Quantity
8
Horizontal Tee, Three Cable Runs
Tray ‘A’ Larger ‘B’ Medium ‘C’ Smaller RadiusWidth Description Cable Run Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
9” 3 runs (1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
(228mm) 03" / 03" / 03” 03 03 03 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14(2) : 7 # *-EB24 (3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB24
3 runs(1) : 7 # *-03-CB17 (1) : 7 # *-06-CB17 (1) : 7 # *-09-CB17 (1) : 7 # *-12-CB20
06" / 03" / 03”06 03 03 (1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
(2) : 7 # *-EB24 (3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB2412”(305mm)
3 runs(1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB14 (1) : 7 # *-18-CB17
03" / 03" / 06”03 03 06 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14
(3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB60
Use the tables below and on page 9 to select parts needed to build yourBarrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray. Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeledwith the radius of your fitting.The box contains both the quantity and the catalog number of the partsneeded for the Barrier Bridge
4. Then select a hardware kit from page 14.
Cable Bridgefor ‘B’ Run
Elevation Brace
Tee Fitting
Straight Section Barrier
Cable Bridgefor ‘C’ Run
9
Horizontal Tee, Three Cable Runs
Tray ‘A’ Larger ‘B’ Medium ‘C’ Smaller RadiusWidth Description Cable Run Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
3 runs12 03 03 (1) : 7 # *-03-CB17 (1) : 7 # *-03-CB14 (2) : 7 # *-EB2412" / 03" / 03”
3 runs 03 03 12 (1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB2403" / 03" / 12”
18” 3 runs09 06 03 (1) : 7 # *-03-CB17 (1) : 7 # *-06-CB11 (3) : 7 # *-EB24(457mm) 09" / 06" / 03”
3 runs03 06 09 (1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (4) : 7 # *-EB24
03" / 06" / 09”3 runs
06 06 06 (1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (3) : 7 # *-EB2406" / 06" / 06”
3 runs18 03 03 (1) : 7 # *-03-CB23 (1) : 7 # *-03-CB20 (2) : 7 # *-EB2418" / 03" / 03”
3 runs03 03 18 (1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB24
03" / 03" / 18”3 runs
12 09 03 (1) : 7 # *-03-CB23 (1) : 7 # *-09-CB14 (3) : 7 # *-EB2412" / 09" / 03”
3 runs03 09 12 (1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (4) : 7 # *-EB24
24” 03" / 09" / 12”(609mm) 3 runs
12 06 06 (1) : 7 # *-06-CB20 (1) : 7 # *-06-CB14 (3) : 7 # *-EB2412" / 06" / 06”
3 runs06 06 12 (1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
06" / 06" / 12”3 runs
09 09 06 (1) : 7 # *-06-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB2409" / 09" / 06”
3 runs06 09 09 (1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (4) : 7 # *-EB24
06" / 09" / 09”3 runs
18 06 06 (1) : 7 # *-06-CB26 (1) : 7 # *-06-CB20 (3) : 7 # *-EB2418" / 06" / 06”3 runs
06 06 18 (1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB2406" / 06" / 18”
3 runs12 12 06 (1) : 7 # *-06-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB24
30” 12" / 12" / 06”(762mm) 3 runs
06 12 12 (1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB2406" / 12" / 12”
3 runs12 09 09 (1) : 7 # *-09-CB23 (1) : 7 # *-09-CB14 (4) : 7 # *-EB24
12" / 09" / 09”3 runs
09 09 12 (1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB2409" / 09" / 12”
3 runs24 06 06 (1) : 7 # *-06-CB32 (1) : 7 # *-06-CB26 (3) : 7 # *-EB2424" / 06" / 06”
3 runs06 06 24 (1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
06" / 06" / 24”3 runs
18 12 06 (1) : 7 # *-06-CB32 (1) : 7 # *-12-CB20 (4) : 7 # *-EB2436” 18" / 12" / 06”
(914mm) 3 runs06 12 18 (1) : 7 # *-18-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB24
06" / 12" / 18”3 runs
18 09 09 (1) : 7 # *-09-CB29 (1) : 7 # *-09-CB20 (4) : 7 # *-EB2418" / 09" / 09”
3 runs09 09 18 (1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
09" / 09" / 18”3 runs
12 12 12 (1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB2412" / 12" / 12”
# = Loading Depth of Tray System – 3", 4", 5", 6"* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)(1, 2, 3, 4 or 5) = Quantity
10
Horizontal Cross, Two Cable Runs
Use the table on page 11 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray. Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled withthe radius of your fitting. The box contains both the quantity and thecatalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
Cable Bridgefor ‘B’ Run
Elevation Brace
Cross Fitting
Straight Section Barrier
Straight SectionBarrier
Cable Bridgefor ‘B’ Run
11
Horizontal Cross, Two Cable Runs
Tray ‘A’ Larger ‘B’ Smaller RadiusWidth Description Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
6” 2 runs (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14
(152mm) 03" and 03" 03 03 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14(2) : 7 # *-EB24 (3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB24
2 runs 06 03 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB11 (1) : 7 # *-18-CB149” 06" and 03"(228mm) 2 runs 03 06
(1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
03" and 06"(3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB60
2 runs 09 03 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB11 (1) : 7 # *-18-CB11 (1) : 7 # *-24-CB1409" and 03"12” 2 runs 03 09
(1) : 7 # *-03-CB17 (1) : 7 # *-06-CB17 (1) : 7 # *-09-CB17 (1) : 7 # *-12-CB20
03" and 09"(3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB60 (4) : 7 # *-EB60
(305mm)
2 runs (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB14 (1) : 7 # *-18-CB1706 06 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB14 (1) : 7 # *-18-CB1706" and 06" (3) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB24 (4) : 7 # *-EB60
2 runs 12 06 (1) : 7 # *-12-CB0812" and 06"(1) : 7 # *-06-CB14
18” 2 runs06 12 (4) : 7 # *-EB24
(457mm) 06" and 12"
2 runs (1) : 7 # *-09-CB11
09" and 09" 09 09 (1) : 7 # *-09-CB11(4) : 7 # *-EB24
2 runs 18 06 (1) : 7 # *-18-CB0818" and 06"(1) : 7 # *-06-CB20
24” 2 runs 06 18 (4) : 7 # *-EB24(609mm) 06" and 18"
2 runs (1) : 7 # *-12-CB14
12" and 12" 12 12 (1) : 7 # *-12-CB14(4) : 7 # *-EB24
2 runs 24 06 (1) : 7 # *-24-CB0824" and 06"(1) : 7 # *-06-CB262 runs 06 24 (4) : 7 # *-EB60
30” 06" and 24"
(762mm) 2 runs 18 12 (1) : 7 # *-18-CB1418" and 12"(1) : 7 # *-12-CB202 runs 12 18 (4) : 7 # *-EB6012" and 18"
2 runs 30 06 (1) : 7 # *-30-CB0830" and 06"(1) : 7 # *-06-CB322 runs 06 30 (4) : 7 # *-EB6006" and 30"
36” 2 runs 24 12 (1) : 7 # *-24-CB14(914mm) 24" and 12"
(1) : 7 # *-12-CB262 runs 12 24 (4) : 7 # *-EB6012" and 24"
2 runs (1) : 7 # *-18-CB20
18" and 18" 18 18 (1) : 7 # *-18-CB20(4) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)(1, 2, 3, 4 or 5) = Quantity
12
Horizontal Cross, Three Cable Runs
Tray ‘A’ Larger ‘B’ Medium ‘C’ Smaller RadiusWidth Description Cable Run Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
(1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
9” 3 runs (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14
(228mm) 03" / 03" / 03” 03 03 03 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14(1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
(3) : 7 # *-EB24 (5) : 7 # *-EB24 (5) : 7 # *-EB60 (5) : 7 # *-EB60
3 runs (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB14 (1) : 7 # *-18-CB17
12” 06" / 03" / 03” 06 03 03 (1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14
(305mm) 3 runs(1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
03" / 03" / 06” 03 03 06 (1) : 7 # *-03-CB17 (1) : 7 # *-06-CB17 (1) : 7 # *-09-CB17 (1) : 7 # *-12-CB20(3) : 7 # *-EB24 (5) : 7 # *-EB24 (5) : 7 # *-EB60 (5) : 7 # *-EB60
Use the tables below and on page 13 to select parts needed to build yourBarrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray. Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeledwith the radius of your fitting.The box contains both the quantity and the catalog number of theparts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
Cable Bridgefor ‘A’ Run
Elevation Brace
Cross Fitting
Straight SectionBarrier
Straight SectionBarrier
Cable Bridgefor ‘C’ Runs
Cable Bridge 1for ‘B’ Run
Cable Bridge 2for ‘B’ Run
13
Horizontal Cross, Three Cable Runs
Tray ‘A’ Larger ‘B’ Medium ‘C’ Smaller RadiusWidth Description Cable Run Cable Run Cable Run 12" (305mm) 24" (609mm) 36" (914mm) 48" (1219mm)
3 runs12 03 0312" / 03" / 03” (1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB14
3 runs03 03 12
(1) : 7 # *-03-CB17 (5) : 7 # *-EB2403" / 03" / 12”
18” 3 runs09 06 03
(457mm) 09" / 06" / 03” (1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (1) : 7 # *-06-CB113 runs
03 06 09(1) : 7 # *-03-CB17 (5) : 7 # *-EB24
03" / 06" / 09”3 runs 06 06 06 (1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB08
06" / 06" / 12” (1) : 7 # *-06-CB14 (5) : 7 # *-EB24
3 runs18 03 0318" / 03" / 03” (1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB20
3 runs03 03 18 (1) : 7 # *-03-CB23 (5) : 7 # *-EB24
03" / 03" / 18”3 runs
12 09 0312" / 09" / 03” (1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (1) : 7 # *-09-CB143 runs
03 09 12 (1) : 7 # *-03-CB23 (5) : 7 # *-EB2424” 03" / 09" / 12”
(609mm) 3 runs12 06 0612" / 06" / 06” (1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB14
3 runs06 06 12 (1) : 7 # *-06-CB20 (5) : 7 # *-EB24
06" / 06" / 12”3 runs
09 09 0609" / 09" / 06” (1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (1) : 7 # *-09-CB113 runs
06 09 09 (1) : 7 # *-06-CB20 (5) : 7 # *-EB2406" / 09" / 09”
3 runs18 06 0618" / 06" / 06” (1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB20
3 runs06 06 18 (1) : 7 # *-06-CB26 (5) : 7 # *-EB60
06" / 06" / 18”3 runs
12 12 0630” 12" / 12" / 06” (1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (1) : 7 # *-12-CB14(762mm) 3 runs
06 12 12 (1) : 7 # *-06-CB26 (5) : 7 # *-EB6006" / 12" / 12”
3 runs12 09 0912" / 09" / 09” (1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB14
3 runs09 09 12 (1) : 7 # *-09-CB23 (5) : 7 # *-EB60
09" / 09" / 12”3 runs
24 06 0624" / 06" / 06” (1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB263 runs
06 06 24 (1) : 7 # *-06-CB32 (5) : 7 # *-EB6006" / 06" / 24”
3 runs18 12 0618" / 12" / 06” (1) : 7 # *-18-CB20 (1) : 7 # *-12-CB11 (1) : 7 # *-12-CB20
36” 3 runs06 12 18 (1) : 7 # *-06-CB32 (5) : 7 # *-EB60
(914mm) 06" / 12" / 18”3 runs
18 09 0918" / 09" / 09” (1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB203 runs
09 09 18 (1) : 7 # *-09-CB29 (5) : 7 # *-EB6009" / 09" / 18”
3 runs12 12 12
(1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (1) : 7 # *-12-CB1412" / 12" / 12” (1) : 7 # *-12-CB26 (5) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)(1, 2, 3, 4 or 5) = Quantity
14
Hardware Kits
Visit the Barrier Bridge webpage for additional tools and resources:
• Installation instructions
• CAD details
• Submittal sheets
www.cooperbline.com/barrier-bridge
Fitting HX - 2 runs HX - 3 runs HT - 2 runs HT - 3 runs
Redi-Rail/Series 2-5 Aluminum 7ZN-HK1 7ZN-HK1 7ZN-HK1 7ZN-HK1
Series 1 Pre-Galv 7ZN-HK1 7ZN-HK1 7ZN-HK1 7ZN-HK1
Series 2-5Alternating Strut Rung 7ZN-HK2 7ZN-HK3 7ZN-HK4 7ZN-HK5
Pre-Galv Up Strut Rung 7ZN-HK2 7ZN-HK3 7ZN-HK4 7ZN-HK5
Down Strut Rung 7ZN-HK1 7ZN-HK1 7ZN-HK1 7ZN-HK1
Series 1 HDG 7SS-HK1 7SS-HK1 7SS-HK1 7SS-HK1
Series 2-5 Alternating Strut Rung 7SS-HK2 7SS-HK3 7SS-HK4 7SS-HK5
HDG & Up Strut Rung 7SS-HK2 7SS-HK3 7SS-HK4 7SS-HK5Stainless Steel Down Strut Rung 7SS-HK1 7SS-HK1 7SS-HK1 7SS-HK1
Catalog Number Hardware
7ZN-HK1 (60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
7ZN-HK2 (60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws(7) 9ZN-1204NB Hold-Down Clamps
7ZN-HK3 (60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws(10) 9ZN-1204NB Hold-Down Clamps
7ZN-HK4 (60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws(5) 9ZN-1204NB Hold-Down Clamps
7ZN-HK5 (60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws(8) 9ZN-1204NB Hold-Down Clamps
7SS-HK1 (60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
7SS-HK2 (60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws(7) 9SS6-1204NB Hold-Down Clamps
7SS-HK3 (60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws(10) 9SS6-1204NB Hold-Down Clamps
7SS-HK4 (60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws(5) 9SS6-1204NB Hold-Down Clamps
7SS-HK5 (60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws(8) 9SS6-1204NB Hold-Down Clamps
15
Why Cooper B-Line?
Why Cooper B-Line?
Unmatched range of solutions
We have a full line of products to support, enclose, connect and protectdata center infrastructure
Superior service
We offer an industry leading commitment to service and a shippingguarantee that is unique to the market
Specification and design resources
We offer customers a strong set of design and specification toolsand resources
Innovation
We deliver product solutions that are innovative and offer labor savings
American made
We manufacture domestically, allowing over 90% of our products to beBuy American Act compliant
Global Locations:
Cooper B-Line’s U.S. Customer Service Service Facility - Canada: Cooper B-Line - Saudi Arabia:Center is staffed Monday through Friday from Cooper B-Line - Canada PO Box 70160 - Al Khobar - 319527 a.m. to 5:00 p.m. Central Standard Time. Div. of Cooper Ind. Canada, Inc. Kingdom of Saudi ArabiaIf a situation requires that you have to contact 5925 McLaughlin Road Phone: 00966 3 812 2236us after hours, please leave a message via Mississauga, ON L5R 1B8 Fax: 00966 3 812 1291phone or E-mail so we can give it immediate Canada Email: [email protected] the following business day. Phone: (800) 569-3660
Fax: (888) 753-3355 Literature Fulfillment Questions:Service Facility - United States: Email: [email protected] Phone: (314) 426-1800Cooper B-Line - USA Fax: (314) 426-6022509 West Monroe Street Service Facility - Europe: Email: [email protected], IL 62249 Cooper B-Line, Ltd. - UKUnited States Walrow, Highbridge Request Literature Website:Phone: (800) 851-7415 Somerset, TA9 4AQ http://order.repcographics.com/cooperb/Fax: (800) 356-1438 United KingdomEmail: [email protected] Phone: + 44 (0) 1278 783371
Fax: + 44 (0) 1278 789037Email: [email protected]
© 2011 Cooper B-Line, Inc. CTBB-11 Printed in U.S.A. 15811
Cooper B-Line509 West Monroe StreetHighland, IL 62249Phone: 800-851-7415Fax: 618-654-1917
www.cooperbline.com
Cooper Industries, Plc.600 Travis, Ste. 5600Houston, TX 77002-1001Phone: 713-209-8400www.cooperindustries.com