Copper Structured Cabling Solutions...structured cabling solutions. Optronics products are designed,...

Copper Structured Cabling Solutions

www.optronicsnet.com2

About UsOptronics products provide a comprehensive range of premium end-to-end fibre optic connectivity and copper structured cabling solutions.

Optronics products are designed, manufactured and supported by a team of industry leaders dedicated to creating the highest quality products that exceed industry standards and are assured to give years of reliable service. All products are manufactured in ISO 9001:2008 certified facilities.

International standards are the basis for Optronics products, ensuring compatibility in all networks. Solutions constructed with Optronics products according to design, installation and testing standards will give years of reliable service. We stand behind our products with full product and system warranties.

OptronicsAn industry leader in enterprise connectivity

Optronics Value

Technical Excellence

CompleteSolutions

Customer Focus

Global Support

3www.optronicsnet.com [email protected] 3

Contents

General InformationIt is the customer's responsibility to check whether the components illustrated in this catalogue comply with different regulations from those stated in special fields of application we are unable to foresee.We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production.No part of this catalogue may be reproduced in any form (print, photocopy, microfilm or any other process) or processed, duplicated or distributed by means of electronic systems without the written permission ofOptronics Limited. We are bound by the English version available via our company website.© Optronics Limited. All rights reserved, including those of any translations.

Page

Network Fundamentals 4

Optronics Copper Cabling System

Category 6A 7

Category 6 21

Category 5e 42

OptronicsPlus Copper Cabling System

Category 7 62

Category 6A 67

Category 6 79

Category 5e 102

Faceplates and Accessories 124

Installation Tools 128

The Optronics Cabling System Warranty Explained 130


COPPER STRUCTURED CABLING | NETWORK FUNDAMENTALS

Network Fundamentals

Cabling Standards

Cabling Classification

Typical network Cables in use

Twisted Pair

Network operators first need to establish what service will run on the network, and determine the performance level needed to make it available to all connected outlets/users.

Stability and performance is always a matter of teamwork – cable and connecting hardware should meet similar requirements; improving just one of these is simply not sufficient.

Over the years, several cabling classes have emerged which are listed below.

However, operators should not only consider applications for today, but anticipate ever increasing network speed and make provisions for future applications. With the network lasting in excess of 15 years, performance headroom is key to creating sustainability in networking.

CLASS HERTS CATEGORY KBPS

Class D+ 100 MHz Category 5e 1000 Mbps

Class E 250 MHz Category 6 1 Gbps

Class EA 500 MHz Category 6A 10 Gbps

Class F 600 MHz Category 7 10 Gbps+

The concept of a generic communication infrastructure for buildings was formed in the early 1990’s resulting in the first EIA/TIA 568 standard.

Further advancements in this area saw the ISO/IEC 11801 and EN50173 standard which was created in 1993.

The purpose of these standards is to share guidelines for IT professionals to keep pace with fast developing network challenges.

Twisted pair cabling has been used for been extensively used for in building cabling applications and offers ease of installation and versatility over a distances of up to 100m, applications also include remote powering through power over Ethernet (PoE) enabled devices.

A twisted pair cable is made by physically twisting together two individually insulated copper wires. The two wires are twisted together to help minimize signals from interfering with or radiating from the pair. A number of twisted pairs are bundled together under one jacket to form a cable.

Jacket LSZH

Solid Copper

Insulation Coating

Drain wire

Foil

Jacket PVC

PE Cross Member

Solid Copper

Insulation Coating

Drain wire

Foil

Jacket PVC

PE Cross Member

Solid Copper

Insulation Coating

Drain wire

Jacket PVC

Solid Copper

Insulation Coating

Drain wire

Foil

Steel Braiding Mesh

PE Cross Member

U/UTPUnshielded Twisted Pair

F/UTPFoil/Unshielded Twisted Pair, Drain wire

U/FTPUnscreened/Foil Twisted Pair

S/FTPScreened (copper braid, tinned)/Foil Shielded Twisted Pair

www.optronicsnet.com [email protected] 5

COPPER STRUCTURED CABLING | STRUCTURED CABLING

Structured Cabling SystemsStructured cabling systems, predominately utilise copper cabling for both the backbone cabling as well as the horizontal cabling. In the hybrid copper/optical fibre cabling system, copper cabling is used for the horizontal cabling and optical fibre cabling is utilized for the backbone cabling.

The following paragraphs will highlight more detail on horizontal cabling.

Work Area CablingThe work area cabling consists of work cables (patch cords) which are used to connect a computing / VoIP device to the telecommunications outlet.

Horizontal CablingThe horizontal cabling is the portion of the cabling which links the work area cabling to the backbone cabling. The horizontal cabling consists of the telecommunications outlet the horizontal cable and patch cords or cross-connect wire.

Equipment CablingEquipment cabling consists of the cable between the equipment fields of the horizontal, intermediate and main cross-connects and the equipment itself. Examples of the equipment connected with equipment cabling are hubs, switches, servers. Equipment cable is typically factory terminated with the appropriate connector(s).

Backbone CablingThe backbone cabling is the portion of the cabling that links the cross-connect within a building and between buildings in a campus environment. The backbone cabling consists of the feeder field of the horizontal cross-connect, intrabuilding and interbuilding backbone cable, and intermediate and main cross-connects.

Copper backbone cabling is used for voice and data applications while optical fibre backbone cabling is used for data application where the reach or data rate of copper backbone cabling is exceeded.

Vertical Cabling

Telecoms Closet

Entrance Facility

Gateway

Horizontal Cabling

Work Area

Work Area

Equipment Room


COPPER STRUCTURED CABLING | HORIZONTAL CABLING

Horizontal Cabling SystemsHorizontal distribution systems are those that run from a telecommunications closet to a workstation outlet. This may be installed in a horizontal or vertical plane. The horizontal cabling systems consist of 2 basic elements:

> Horizontal Cable and connecting hardware

> Horizontal pathways and spaces – the container system

The maximum horizontal cable length is 90 metres (295 feet). 10 metres is allowed for cords in the work area, and for patch cords or jumpers in the telecommunications closet.

Horizontal cabling does not include the work area cabling or equipment cabling, which are used to connect telecommunications equipment at either end of the horizontal cabling. However, the work area and equipment cabling affect the end-to-end channel performance and must be taken into account when planning any system.

Horizontal cables link the telecommunications outlets to the horizontal cross-connect. A dedicated 4-pair 100 ohm UTP cable connects each telecommunications outlet to the horizontal cross-connect.

It is recommended to install horizontal cables to accommodate the maximum capacity of the floor size. This will facilitate easy moves, adds and changes however this is not always sufficient for expansion and re-cabling may need to be considered.

It is recommended to provide the same number of horizontal cables to each work area and to provide a minimum of two horizontal cables per work area to meet the service needs of today and the future.

At least one telecommunication outlet/connector shall be a 4 pairs, 100 Ω UTP cable, Category 5e or higher and the other/second telecommunication outlet/connector shall be one of

these 2 proposed horizontal media:

> 4 Pairs, 100 Ω UTP Category 5e cable

> 2 multimode optical fibres either 62.5/125 µm or 50/125 µm

The maximum horizontal cable length between an outlet and the telecommunications room shall not exceed 90 m (295ft).

This may be used as follows:

> 6m (20ft) max for patch cords

> 3m (10ft) max for work area cables

> 1m (3ft) for active equipment

The maximum backbone cable length is 90 metres (295 feet). This 90 metre length assumes that 5 metres (16 feet) are needed at each end for equipment cables connecting to the backbone.

The maximum allowed length of a Cat.-6 cable is 100 metres (330ft) when used for 10/100/1000BASE-T. This consists of 90 metres (295ft) of solid “horizontal” cabling between the patch panel and the wall jack, plus 10 metres (33ft) of stranded patch cable between each jack and the attached device. Since stranded cable has higher attenuation than solid cable, exceeding 10 metres of patch cabling will reduce the permissible length of horizontal cable.

A minimum of slack is recommended when installing a horizontal cable run. At the telecommunications room, a cable slack of 3m (10ft) stored in an 8 shape form is recommended and at the outlet, a cable slack of 30cm (12in.) is recommended. The slacks will allow for repairs and relocations needs. Splices on unshielded twisted –pair are not permitted.

www.optronicsnet.com

Category 6ACable 8

Patch Panels 12

Keystone Jacks 14

Faceplates 16

Patch Cords 17



Opt

roni

cs C

ateg

ory

6 A

13

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A U/UTP CABLE

Category 6A U/UTP Cable

Category 6A Unshielded Twisted Pair (U/UTP) cable is produced using a 4 x 2 x 23 AWG copper wire structure to a class EA

standard, and supports protocol’s up to 500 MHz. It is ideal for horizontal and backbone installations.

> 23 AWG conductor (0.57mm) – solid bare copper cable > PVC or LSZH external jacket options > Supplied in 305m boxes or 500m reels > Printed metre marks

Features

> Supports category 6A networks running up to 500 MHz applications

> Horizontal and backbone installations > 10 Base T (IEEE 802.3) > 100 Base T (IEEE 802.3U) > 1000 Base T (IEEE 802.3ab) > 100 VG any LAN (IEEE 802.12) > Token ring (IEEE 805.5) > ATM 155 > 10G Base T (IEEE 802.3an)

Applications

> Category 6A > EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements of

RoHS2 / REACH

Conformance

Jacket LSZH or PVC

PE Cross Member

23AWG Solid Copper

Rip Cord

Insulation Coating

U/uTP

> Category 6A U/UTP LSZH cables exceed the requirements of:

> IEC 60332-1-2

> IEC 60754-2

> IEC 61034

> The Category 6A U/UTP LSZH cable is manufactured and tested directly in accordance with the major industry standards:

> ISO/IEC 11801:2011

> ANSI/TIA/EIA 568-C.2

> CENELEC EN 50173-1:2011

> IEC 61156-5

> EN 50288-2-1

Applicable Standards

Fire Performance


Opt

roni

cs C

ateg

ory

6 A

13

DESCRIPTION PART NUMBER

Category 6A Unshielded Twisted Pair (U/UTP) PVC 23 AWG cable - 305m Box UTP6A305PVC

Category 6A Unshielded Twisted Pair (U/UTP) LSZH 23 AWG cable - 305m Box UTP6A305LSZH

Category 6A Unshielded Twisted Pair (U/UTP) PVC 23 AWG cable - 500m Box UTP6A500PVC

Category 6A Unshielded Twisted Pair (U/UTP) LSZH 23 AWG cable - 500m Box UTP6A500LSZH

Ordering Information

Transmission line performance at 20˚C

Mechanical Characteristics

Technical SpecificationsCONSTRUCTIONConductors A single strand of 23AWG (0.56mm) solid copper

Insulation Expanded Polyethylene

Cable8 insulated wires formed into 4 pairs. Each pair is individually screened with an aluminised polyester tape. (The aluminium side of the tape is in continuous contact with the tinned copper drain wire)

ScreenAn aluminised polyester tape screen applied with a 15% minimum overlap (The aluminium side is in continuous contact with the tinned copper drain wire.)

Sheath A uniform layer of violet coloured low smoke zero halogen (LSZH) compound (RAL 4005)

Diameter 7.5mm ± 0.3mm

TEMPERATURE RANGEOperation -20˚C to + 60˚C

Installation 0˚C to +50˚C

Storage -20˚C to + 70˚C

ELECTRICAL PROPERTIES AT 20˚CCharacteristic Impedance

(1-100MHz) (100 - 250MHz)

100 ± 15Ω100 ± 18Ω

DC Loop Resistance ≤ 19.0Ω/100m

Resistance Unbalance ≤ 2%

Capacitance Unbalance to Earth ≤ 1600 pF/km

Delay Skew ≤ 40ns/100m @ 500MHz

Nominal Velocity of Propagation 78%

Propagation Delay (Nominal) ≤ 534ns/100m

Test Voltage (d.c. for 1 minute) Conductor/Conductor 1000V

Insulation Resistance (500V d.c) ≥ 500MΩ.km

Transfer Impedance ≥ 55dB

MINIMUM BEND RADIIInstallation 8 x cable diameter

Installed 4 x cable diameter

MAXIMUM TENSILE FORCEDuring Installation 100N

FREQUENCYMHZ

ATTENUATIONdB/100M

NEXT MINdB

ACR MINdB

PSNEXTMIN dB

ELFEXT MIN dB

PSELFEXT MIN dB

PSANEXT MIN dB RETURN LOSS

1 1.8 95. 93.2 95.0 68.0 65.0 - -

4 3.8 66.3 62.5 66.3 58.0 55.0 76.5 23

10 5.9 60.3 54.4 60.3 50.0 47.0 72.5 25

20 8.4 55.8 47.4 55.8 44.0 41.0 69.5 25

62.5 15.0 48.4 33.4 48.4 34.1 31.1 64.5 21.5

100 19.1 45.3 26.2 45.3 30.0 27.0 62.5 20.1

250 31.1 39.3 8.2 39.3 22.0 19.0 56.5 17.3

500 45.3 34.8 -10.5 34.8 16.0 13.0 52.0 17.3

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A U/UTP CABLE


Opt

roni

cs C

ateg

ory

6 A

13

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A F/UTP CABLE

Category 6A F/UTP Cable

> 23 AWG conductor (0.57mm) – solid bare copper cable > PVC or LSZH external jacket options > Supplied in 305m boxes or 500m reels > Printed metre marks

Features

Conformance

Category 6A Foiled Twisted Pair (F/UTP) cable is produced using a 4 x 2 x 23 AWG copper wire structure to a class EA standard,

and supports protocol’s up to 500 MHz. It is ideal for horizontal and backbone installations.

Applications > Supports category 6A networks running up to 500 MHz

applications > Ideal for environments where heavy external interference

can disrupt signal such as EMI > Horizontal and backbone installations > 10 Base T (IEEE 802.3) > 100 Base T (IEEE 802.3U) > 1000 Base T (IEEE 802.3ab) > 100 VG any LAN (IEEE 802.12) > Token ring (IEEE 805.5) > ATM 155 > 10G Base T (IEEE 802.3an)

> Category 6A > EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements of

RoHS2 / REACH

Jacket LSZH or PVC

Insulation Coating

PE Cross Member

Foil

Drain wire

Rip cord

23AWG Solid Copper

F/uTP

> Category 6A F/UTP LSZH cables exceed the requirements of:

> IEC 60332-1-2

> IEC 60754-2

> IEC 61034

> The Category 6A F/UTP LSZH cable is manufactured and tested directly in accordance with the major industry standards:

> ISO/IEC 11801:2011

> ANSI/TIA/EIA 568-C.2

> CENELEC EN 50173-1:2011

> IEC 61156-5

> EN 50288-2-1


Fire Performance


Opt

roni

cs C

ateg

ory

6 A

13


Category 6A Foiled Twisted Pair (F/UTP) PVC - 23 AWG cable - 305m Box FTP6A305PVC

Category 6A Foiled Twisted Pair (F/UTP) LSZH - 23 AWG cable - 305m Box (Delta Approved) FTP6A305LSZH

Category 6A Foiled Twisted Pair (F/UTP) PVC 23 AWG cable - 500m Box FTP6A500PVC

Category 6A Foiled Twisted Pair (F/UTP) LSZH 23 AWG cable - 500m Box (Delta Approved) FTP6A500LSZH





Insulation Expanded Polyethylene

Cable8 insulated wires formed into 4 pairs. Each pair is individually screened with an aluminised polyester tape. (The aluminium side of the tape is in continuous contact with the tinned copper drain wire)


Sheath A uniform layer of violet coloured low smoke zero halogen (LSZH) compound (RAL 4005)

Diameter 7.5mm ± 0.3mm




ELECTRICAL PROPERTIES AT 20˚CCharacteristic Impedance

(1-100MHz) (100 - 250MHz)

100 ± 15Ω100 ± 18Ω













FREQUENCYMHZ

ATTENUATIONdB/100M

NEXT MINdB

ACR MINdB

PSNEXTMIN dB

ELFEXT MIN dB

PSELFEXT MIN dB

PSANEXT MIN dB RETURN LOSS

1 1.8 95. 93.2 95.0 68.0 65.0 - -

4 3.8 66.3 62.5 66.3 58.0 55.0 76.5 23

10 5.9 60.3 54.4 60.3 50.0 47.0 72.5 25

20 8.4 55.8 47.4 55.8 44.0 41.0 69.5 25

62.5 15.0 48.4 33.4 48.4 34.1 31.1 64.5 21.5

100 19.1 45.3 26.2 45.3 30.0 27.0 62.5 20.1

250 31.1 39.3 8.2 39.3 22.0 19.0 56.5 17.3

500 45.3 34.8 -10.5 34.8 16.0 13.0 52.0 17.3

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A F/UTP CABLE


Opt

roni

cs C

ateg

ory

6 A

13

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A UTP KEYSTONE JACK PATCH PANEL

Category 6A UTP Keystone Jack Patch Panel

Category 6A Unshielded Twisted Pair (UTP) tool free patch panels conform to class EA performance. These panels offer termination using the latest in tool free keystone jack technology. The use of an insertion tool is not required when terminating these panels.

All 8 wires can be loaded and terminated simultaneously, drastically reducing installation time. Available in 1U 24 port format, panels are supplied fully loaded with rear management bars and fixings.

> RJ45 24 port fully loaded 1U Panel > Saves valuable installation time > Supplied with fixings > Loaded with 180° tool free keystone jacks > 19” rack mountable > Rear cable management bar included > Port numerically identified

Features

> Supports category 6A networks running up to 500 MHz applications > Able to connect FCC Port for category 6A UTP patch cords > IDC for horizontal distribution cables

Applications

> Category 6A > EIA/TIA 568A/B wiring standard > ISO/IEC 11801 : 2002 > ANSI/EIA/TIA 568B.2 : 2002

Conformance

MECHANICAL VALUE

Housing Material PC UL94V-0

Panel Frame Carbon Steel Frame, Plastic Coated Clad

IDC Material Phosphor Bronze Stamp Pin 0.35mm

Contact Material Phosphor Bronze + Gold Plating 0.50mm

RJ45 Jack Life Min 750 Insertions

IDC Life Min 250 Terminations

Technical SpecificationsOrdering InformationDESCRIPTION PART NUMBER

Category 6A UTP Full Loaded 1U 24 Port patch panel Black CAT6AUTP24


Opt

roni

cs C

ateg

ory

6 A

13

Category 6A STP Tool Free Panel


Category 6A STP Full Loaded 1U 24 Port patch panel Black CAT6ASTP24TJ

Category 6A Shielded Twisted Pair (STP) tool free patch panels conform to class EA performance. These panels offer termination using the latest in tool free keystone jack technology. The use of an insertion tool is not required when termination these panels.

All 8 wires can be loaded and termination simultaneously, drastically reducing installation time. Available in 1U 24 port format, panels are supplied fully loaded with rear management bars and fixings.

> RJ45 24 port fully loaded 1U Panel > Saves valuable installation time > Supplied with fixings > Loaded with 180° tool free keystone jacks > 19” rack mountable > Rear cable management bar included > Port numerically identified

Features


> Able to connect FCC port for category 6A STP patch cords > IDC for horizontal distribution cables

Applications

> Category 6A > EIA/TIA 568A/B wiring standard > ISO/IEC 11801 : 2002 > EIA/TIA 568B.2 : 2002 > This product conforms to the materials requirements of

RoHS2

Conformance

MECHANICAL VALUE


Panel Frame High carbon, Plastic Powder Clad





Technical Specifications


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A STP TOOL FREE PANEL


Opt

roni

cs C

ateg

ory

6 A

13

Category 6A UTP Keystone Jack

Category 6A Unshielded Twisted Pair (UTP) keystone jacks conform to class EA performance. They follow the industry standard keystone jack footprint and the small design makes

them the ideal for high density applications. Each keystone jack is available with wiring diagram and conductor protection cap and can be supplied in black or white variants.

MECHANICAL VALUE







Ordering InformationDESCRIPTION PART NUMBER

Category 6A UTP keystone jack White Box of 20pcs CAT6AJACK180WH

Category 6A UTP keystone jack Black Box of 20pcs CAT6AJACK180BK

Representative image of a loaded angled module with a category 6A UTP keystone jack (please note angled module is sold separately).

> Small form RJ45 footprint design > IDC punch down > 180° termination > High performance > Available in black/white > Wiring diagram and conductor cap supplied > Supplied in boxes of 20pcs > A compact design, with punching sequence direction marks

on the side of the keystone jack

Features


> Ideal for high density installations

Applications

> Category 6A > ISO/IEC 11801 : 2002 > ANSI/EIA/TIA 568B.2 : 2002 > This product conforms to the materials requirements of

RoHS2

Conformance

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A UTP KEYSTONE JACK


Opt

roni

cs C

ateg

ory

6 A

13

Category 6A STP Keystone Jack

Category 6A Shielded Twisted Pair (STP) keystone jacks conform to class EA performance. They follow the industry standard keystone jack footprint, the small form design making them

perfect for high density applications. Each keystone jack is available with 180° termination design, wiring diagram and conductor protection cap.

MECHANICAL VALUEHousing Material PC UL94V-0






Ordering InformationDESCRIPTION PART NUMBERCategory 6A STP keystone jack - Box of 20pcs CAT6ASTPTJ

> Small form RJ45 footprint design > IDC punch down > 180° termination > High performance > Wiring diagram and conductor cap supplied > Supplied in boxes of 20pcs > A compact design, with punching sequence direction marks

on the side of the keystone jack

Features


> Ideal for high density installations

Applications


RoHS2

Conformance

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A STP KEYSTONE JACK


Opt

roni

cs C

ateg

ory

6 A

13

PRODUCT DESCRIPTION PART NUMBER PRODUCT DESCRIPTION PART NUMBER

Single gang - 2 position86x86mm - Box of 10pcs FACEPLATE2PBEV Single gang - 2 position

86x86mm - Box of 10pcs FACEPLATE2PFLAT

Double gang - 4 position86x147mm - Box of 10pcs FACEPLATE4PBEV Double gang - 4 position


Angled module and jack 86x86mm - Box of 10pcs CAT6AFACE1PBEVJ Angled module and jack

86x86mm - Box of 10pcs CAT6AFACE1PFLTJ

Angled module and jack 86x86mm - Box of 10pcs CAT6AFACE2PBEVJ Angled module and jack


Angled module and jack86x147mm - Box of 10pcs CAT6AFACE4PBEVJ Angled module and jack


Box of 20pcs ANGLEDMODULE 50x25mmBox of 50pcs HALFBLANK

50x12.5mm Box of 100pcs SINGLEBLANK 86x86mm - Box of 10pcs FACEPLATE1SL

86x86mm - Box of 10pcs FACEPLATE2SL

Category 6A Faceplates

> Fully loaded / completed outlets > Reduced installation time > Wiring diagram and mini cable tie supplied > Supplied in boxes of 10pcs > Fixing screws, labelling supplied

Features > Supports category 6A networks running up to 500 MHz

applications > Backwards compatible with category 6 distribution systems

Applications


RoHS2

ConformanceMECHANICAL VALUEIDC Material Phosphor Bronze Stamp Pin 0.35mm





OPTRONICS COPPER CABLING SYSTEM | CAT6A FACEPLATES



Opt

roni

cs C

ateg

ory

6 A

13

Category 6A U/UTP Patch Cords

Category 6A Unshielded Twisted Pair (U/UTP) patch cords conform to class EA standards. Our patch cords are made to the highest standards using only quality stranded cable, giving them the best in flexibility, plus top grade 50μ gold plated RJ45 connector plugs for high quality connections. This combination makes for outstanding performance and reduced degradation.

All patch cords are produced with an injection moulded boot with an easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties. For best performance we recommend these as part of a full Optronics category 6A system.

> Quality 24 AWG stranded (flexible) cable > High grade 50μ gold plated RJ45 connector > Injection moulded boot for improved strain relief > Soft latch-cover design for easy depression

Features

> Supports category 6A, 6 and 5e networks running up to 500 MHz applications

> Backwards compatible with category 6 distribution systems

Applications


RoHS2

Conformance

Jacket PVC/LSZH

PE Cross Member

24AWG Stranded Copper

Insulation Coating

CONSTRUCTION VALUE

Conductors

AWG 24

Size (mm) 7/0.20 +/- 0.008

Material Bare Copper

InsulatorsDiameter (mm) 0.98+/-0.05

Material Polyolefin

Jacket

External O.D. 6.0 +/- 0.20

Thickness (mm) 0.5

Material PVC / LSZH


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A U/UTP PATCH CORDS

Scan for MoreInformation

on PVC Patch Cords


on LSZH Patch Cords

U/uTP


Opt

roni

cs C

ateg

ory

6 A

13

PART NUMBER METRE

YELL

OW

UTP6AYE0.5-PVC 0.5

UTP6AYE1-PVC 1

UTP6AYE2-PVC 2

UTP6AYE3-PVC 3

UTP6AYE5-PVC 5

UTP6AYE10-PVC 10

RED

UTP6ARD0.5-PVC 0.5

UTP6ARD1-PVC 1

UTP6ARD2-PVC 2

UTP6ARD3-PVC 3

UTP6ARD5-PVC 5

UTP6ARD10-PVC 10

WH

ITE

UTP6AWH0.5-PVC 0.5

UTP6AWH1-PVC 1

UTP6AWH2-PVC 2

UTP6AWH3-PVC 3

UTP6AWH5-PVC 5

UTP6AWH10-PVC 10

PART NUMBER METRE

GRE

Y

UTP6AGY0.5-PVC 0.5

UTP6AGY1-PVC 1

UTP6AGY2-PVC 2

UTP6AGY3-PVC 3

UTP6AGY5-PVC 5

UTP6AGY10-PVC 10

BLA

CK

UTP6ABK0.5-PVC 0.5

UTP6ABK1-PVC 1

UTP6ABK2-PVC 2

UTP6ABK3-PVC 3

UTP6ABK5-PVC 5

UTP6ABK10-PVC 10

PART NUMBER METRE

BLU

E

UTP6ABL0.5-PVC 0.5

UTP6ABL1-PVC 1

UTP6ABL2-PVC 2

UTP6ABL3-PVC 3

UTP6ABL5-PVC 5

UTP6ABL10-PVC 10

GRE

EN

UTP6AGN0.5-PVC 0.5

UTP6AGN1-PVC 1

UTP6AGN2-PVC 2

UTP6AGN3-PVC 3

UTP6AGN5-PVC 5

UTP6AGN10-PVC 10

ORA

NG

E

UTP6AOR0.5-PVC 0.5

UTP6AOR1-PVC 1

UTP6AOR2-PVC 2

UTP6AOR3-PVC 3

UTP6AOR5-PVC 5

UTP6AOR10-PVC 10

PVC

LSZHPART NUMBER METRE

GRE

Y

UTP6AGY0.5-LSZH 0.5

UTP6AGY1-LSZH 1

UTP6AGY2-LSZH 2

UTP6AGY3-LSZH 3

UTP6AGY5-LSZH 5

UTP6AGY10-LSZH 10

BLA

CK

UTP6ABK0.5-LSZH 0.5

UTP6ABK1-LSZH 1

UTP6ABK2-LSZH 2

UTP6ABK3-LSZH 3

UTP6ABK5-LSZH 5

UTP6ABK10-LSZH 10

PART NUMBER METRE

YELL

OW

UTP6AYE0.5-LSZH 0.5

UTP6AYE1-LSZH 1

UTP6AYE2-LSZH 2

UTP6AYE3-LSZH 3

UTP6AYE5-LSZH 5

UTP6AYE10-LSZH 10

RED

UTP6ARD0.5-LSZH 0.5

UTP6ARD1-LSZH 1

UTP6ARD2-LSZH 2

UTP6ARD3-LSZH 3

UTP6ARD5-LSZH 5

UTP6ARD10-LSZH 10

WH

ITE

UTP6AWH0.5-LSZH 0.5

UTP6AWH1-LSZH 1

UTP6AWH2-LSZH 2

UTP6AWH3-LSZH 3

UTP6AWH5-LSZH 5

UTP6AWH10-LSZH 10

PART NUMBER METRE

BLU

E

UTP6ABL0.5-LSZH 0.5

UTP6ABL1-LSZH 1

UTP6ABL2-LSZH 2

UTP6ABL3-LSZH 3

UTP6ABL5-LSZH 5

UTP6ABL10-LSZH 10

GRE

EN

UTP6AGN0.5-LSZH 0.5

UTP6AGN1-LSZH 1

UTP6AGN2-LSZH 2

UTP6AGN3-LSZH 3

UTP6AGN5-LSZH 5

UTP6AGN10-LSZH 10

ORA

NG

E

UTP6AOR0.5-LSZH 0.5

UTP6AOR1-LSZH 1

UTP6AOR2-LSZH 2

UTP6AOR3-LSZH 3

UTP6AOR5-LSZH 5

UTP6AOR10-LSZH 10

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A U/UTP PATCH CORDS


Opt

roni

cs C

ateg

ory

6 A

13

Category 6A F/UTP Patch Cords

Category 6A Foiled Twisted Pair (F/UTP) patch cords conform to class EA standards. Our patch cords are made to the highest standards, using only quality stranded cable, giving you the best in flexibility, plus top grade 50μ gold plated RJ45 connector plugs for high quality connections. This combination makes for outstanding performance and reduced degradation. Aluminium tape is used to shield all 4 pairs; this gives a screened protection against external interference such as EMI.

All patch cords are produced with an injection moulded boot with easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties. For best performance we recommend you use these as part of a full Optronics category 6A system.

> Quality 26 AWG stranded (flexible) cable > High grade 50μ gold plated RJ45 connector > Injection moulded boot for improved strain relief > Soft latch-cover design for easy depression

Features

> Supports category 6A, 6 and 5e networks running up to 500 MHz applications

> Ideal for environments where heavy external interference can disrupt signal such as EMI

> Backwards compatible with category 6A distribution system

Applications


RoHS2

Conformance

CONSTRUCTION VALUE

ConductorsAWG 26Size (mm) 7/0.20 +/- 0.008Material Bare Copper

InsulatorsDiameter (mm) 0.98+/-0.05Material Polyolefin

Jacket External O.D. 6.0 +/- 0.20Thickness (mm) 0.5Material PVC / LSZH

TapeMaterial Aluminium MylarCoverage (%) 125


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A F/UTP PATCH CORDS

Jacket PVC/LSZH

PE Cross Member


Insulation Coating

Foil


on PVC Patch Cords


on LSZH Patch Cords

F/uTP


Opt

roni

cs C

ateg

ory

6 A

13

PVC

LSZH

PART NUMBER METRE

GRE

Y

FTP6AGY0.5-PVC 0.5

FTP6AGY1-PVC 1

FTP6AGY2-PVC 2

FTP6AGY3-PVC 3

FTP6AGY5-PVC 5

FTP6AGY10-PVC 10

BLA

CK

FTP6ABK0.5-PVC 0.5

FTP6ABK1-PVC 1

FTP6ABK2-PVC 2

FTP6ABK3-PVC 3

FTP6ABK5-PVC 5

FTP6ABK10-PVC 10

PART NUMBER METRE

YELL

OW

FTP6AYE0.5-PVC 0.5

FTP6AYE1-PVC 1

FTP6AYE2-PVC 2

FTP6AYE3-PVC 3

FTP6AYE5-PVC 5

FTP6AYE10-PVC 10

RED

FTP6ARD0.5-PVC 0.5

FTP6ARD1-PVC 1

FTP6ARD2-PVC 2

FTP6ARD3-PVC 3

FTP6ARD5-PVC 5

FTP6ARD10-PVC 10

WH

ITE

FTP6AWH0.5-PVC 0.5

FTP6AWH1-PVC 1

FTP6AWH2-PVC 2

FTP6AWH3-PVC 3

FTP6AWH5-PVC 5

FTP6AWH10-PVC 10

PART NUMBER METRE

BLU

E

FTP6ABL0.5-PVC 0.5

FTP6ABL1-PVC 1

FTP6ABL2-PVC 2

FTP6ABL3-PVC 3

FTP6ABL5-PVC 5

FTP6ABL10-PVC 10

GRE

EN

FTP6AGN0.5-PVC 0.5

FTP6AGN1-PVC 1

FTP6AGN2-PVC 2

FTP6AGN3-PVC 3

FTP6AGN5-PVC 5

FTP6AGN10-PVC 10

ORA

NG

E

FTP6AOR0.5-PVC 0.5

FTP6AOR1-PVC 1

FTP6AOR2-PVC 2

FTP6AOR3-PVC 3

FTP6AOR5-PVC 5

FTP6AOR10-PVC 10

PART NUMBER METRE

GRE

Y

FTP6AGY0.5-LSZH 0.5

FTP6AGY1-LSZH 1

FTP6AGY2-LSZH 2

FTP6AGY3-LSZH 3

FTP6AGY5-LSZH 5

FTP6AGY10-LSZH 10

BLA

CK

FTP6ABK0.5-LSZH 0.5

FTP6ABK1-LSZH 1

FTP6ABK2-LSZH 2

FTP6ABK3-LSZH 3

FTP6ABK5-LSZH 5

FTP6ABK10-LSZH 10

PART NUMBER METRE

YELL

OW

FTP6AYE0.5-LSZH 0.5

FTP6AYE1-LSZH 1

FTP6AYE2-LSZH 2

FTP6AYE3-LSZH 3

FTP6AYE5-LSZH 5

FTP6AYE10-LSZH 10

RED

FTP6ARD0.5-LSZH 0.5

FTP6ARD1-LSZH 1

FTP6ARD2-LSZH 2

FTP6ARD3-LSZH 3

FTP6ARD5-LSZH 5

FTP6ARD10-LSZH 10

WH

ITE

FTP6AWH0.5-LSZH 0.5

FTP6AWH1-LSZH 1

FTP6AWH2-LSZH 2

FTP6AWH3-LSZH 3

FTP6AWH5-LSZH 5

FTP6AWH10-LSZH 10

PART NUMBER METRE

BLU

E

FTP6ABL0.5-LSZH 0.5

FTP6ABL1-LSZH 1

FTP6ABL2-LSZH 2

FTP6ABL3-LSZH 3

FTP6ABL5-LSZH 5

FTP6ABL10-LSZH 10

GRE

EN

FTP6AGN0.5-LSZH 0.5

FTP6AGN1-LSZH 1

FTP6AGN2-LSZH 2

FTP6AGN3-LSZH 3

FTP6AGN5-LSZH 5

FTP6AGN10-LSZH 10

ORA

NG

E

FTP6AOR0.5-LSZH 0.5

FTP6AOR1-LSZH 1

FTP6AOR2-LSZH 2

FTP6AOR3-LSZH 3

FTP6AOR5-LSZH 5

FTP6AOR10-LSZH 10

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6A F/UTP PATCH CORDS


Category 6Optronics Copper Cabling System

Cable 22

Patch Panels 26

Keystone Jacks 31

Euro Modules 34

Faceplates 35

Work Area Outlets Keystone Boxes 37

Patch Cords 38


Opt

roni

cs C

ateg

ory

6

11

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 U/UTP CABLE

Category 6 U/UTP Cable

Category 6 Unshielded Twisted Pair (U/UTP) cable is produced using 4 x 2 x 23 AWG copper wire structure to a class E standard.

More than capable of supporting protocol’s up to 250 MHz for horizontal and backbone installations.

> 23 AWG conductor – solid bare copper cable > PVC, LSZH and PE external jacket options > Supplied in 305m boxes or 500m reels > Printed metre marks

Features

> Supports category 6 (class E) networks running up to 250MHz applications

> Backwards compatible with category 5e distribution systems

> Horizontal and backbone installations > 10 Base T (IEEE 802.3) > 100 Base T (IEEE 802.3U) > 1000 Base T (IEEE 802.3ab) > 100 VG any LAN (IEEE 802.12) > Token ring (IEEE 805.5)

Applications

Conformance > Category 6 > ANSI/EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements of

RoHS2 > REACH > ETL/UL approved

PE Cross Member

Insulation Coating

Jacket PVC, LSZH or PE

23AWG Solid Copper

U/uTP


Fire PerformanceCategory 6 U/UTP PVC cables exceed the requirements of:

> IEC 60332-1-2

The Category 6 U/UTP PVC cable is manufactured and tested directly in accordance with the major industry standards:

> ISO/IEC 11801:2011

> ANSI/TIA/EIA-586-C.2

> CENELEC EN 50173-1:2011

> IEC 61156-5

> EN 50288-2-1


Opt

roni

cs C

ateg

ory

611

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 U/UTP CABLE

DESCRIPTION PART NUMBERCategory 6 Unshielded Twisted Pair (U/UTP) 23 AWG cable PVC Grey - 305m box - ETL, UL approved UTP6305PVC

Category 6 Unshielded Twisted Pair (U/UTP) 23 AWG cable LSZH Violet - 305m box - ETL approved UTP6305LSZH

Category 6 solid Unshielded Twisted Pair (U/UTP) 23 AWG cable LSZH Grey - 500m reels - ETL approved UTP6500LSZH

Category 6 Unshielded Twisted Pair (U/UTP) External Grade 23 AWG cable - PE black 305m box UTP6305EXT





Insulation Polyethylene

Cable8 insulated wires formed into 4 pairs. The 4 pairs are subsequently cabled together around a polyethylene cross-filler to form a cohesive unit.

Sheath A uniform layer of grey coloured polyvinyl chloride (PVC) compound (RAL 7035)

Diameter 6.0mm

ELECTRICAL PROPERTIES AT 20˚CCharacteristic Impedance (1-100MHz) 100 ± 15Ω
















FREQUENCYMHZ

ATTENUATIONdB/100M

42.0NEXTdB38.3

ACRdB/100M

PSNEXTdB

ELFEXTdB/100M

PSELFEXTdB/100M RETURN LOSS

1 2.1 74.0 71.9 72.0 68 65 20

4 3.8 65.3 61.5 63.3 56 53 23

10 6.0 59.3 53.3 57.3 48 45 25

16 7.6 56.0 48.4 54.0 44 41 25

20 9.3 45.8 36.5 42.8 42 39 25

62.5 17.0 38.4 21.4 35.4 32 29 21.5

100 22.0 35.3 13.3 32.3 28 25 20.1

125 22.5 43.0 20.5 41.0 26 23 19.5

155.5 25.4 42.0 16.6 40.0 24 21 18.8

250 33.0 38.3 5.3 32.3 20 17 17.3


Opt

roni

cs C

ateg

ory

6

11

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 F/UTP CABLE

Category 6 F/UTP Cable

Category 6 Foiled Twisted Pair (F/UTP) cable is produced using 4 x 2 x 23 AWG copper to a class E standard. An aluminium tape is used to shield all 4 pairs; this gives a screened protection

against external interference such as EMI. Capable of supporting protocol’s up to 250 MHz for horizontal and backbone installations.

> 23 AWG conductor – solid bare copper cable > PVC, LSZH and PE external jacket options > Supplied in 305m boxes or 500 reels > Printed metre marks

Features

> Supports category 6 (class E) networks running up to 250 MHz applications


> Horizontal and backbone installations > 10 Base T (IEEE 802.3) > 100 Base T (IEEE 802.3U) > 1000 Base T (IEEE 802.3ab) > 100 VG any LAN (IEEE 802.12) > Token ring (IEEE 805.5)

Applications

Conformance > Category 6 > ANSI/EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements

of RoHS2 > REACH > ETL/UL approved

PE Cross Member

23AWG Solid Copper

Foil

Drain Wire

Insulation Coating

Jacket PVC, LSZH or PE

F/uTP


Fire PerformanceCategory 6 F/UTP PVC cables exceed the requirements of:

> IEC 60332-1-2

The Category 6 F/UTP PVC cable is manufactured and tested directly in accordance with the major industry standards:

> ISO/IEC 11801:2011

> ANSI/TIA/EIA-568-C.2

> CENELEC EN 50173-1:2011

> IEC 61156-5

> EN 50288-2-1


Opt

roni

cs C

ateg

ory

611

DESCRIPTION PART NUMBERCategory 6 Foiled Twisted Pair (F/UTP) 23 AWG cable PVC Grey 305m box - ETL, UL approved FTP6305PVC

Category 6 Foiled Twisted Pair (F/UTP) 23 AWG cable LSZH Violet - 305m box FTP6305LSZH

Category 6 Foiled Twisted Pair (F/UTP) External Grade 23 AWG cable - PE black 305m box FTP6350EXT





Insulation Polyethylene

Cable8 insulated wires formed into 4 pairs. The 4 pairs are subsequently cabled together around a polyethylene cross-filler to form a cohesive unit.


Sheath A uniform layer of grey coloured polyvinyl chloride (PVC) compound (RAL 7035)

ELECTRICAL PROPERTIES AT 20˚CCharacteristic Impedance (1-100MHz) 100 ± 15Ω
















FREQUENCYMHZ

ATTENUATIONdB/100M

42.0NEXTdB38.3

ACRdB/100M

PSNEXTdB

ELFEXTdB/100M

PSELFEXTdB/100M RETURN LOSS

1 2.1 74.0 71.9 72.0 68 65 20

4 3.8 65.3 61.5 63.3 56 53 23

10 6.0 59.3 53.3 57.3 48 45 25

16 7.6 56.0 48.4 54.0 44 41 25

20 9.3 45.8 36.5 42.8 42 39 25

62.5 17.0 38.4 21.4 35.4 32 29 21.5

100 22.0 35.3 13.3 32.3 28 25 20.1

125 22.5 43.0 20.5 41.0 26 23 19.5

155.5 25.4 42.0 16.6 40.0 24 21 18.8

250 33.0 38.3 5.3 32.3 20 17 17.3

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 F/UTP CABLE


Opt

roni

cs C

ateg

ory

6

11

Category 6 UTP Keystone Jack Patch Panel

MECHANICAL VALUE Housing Material PC UL94V-0

Panel Frame Carbon Steel Frame, Plastic Powder Clad





DESCRIPTION PART NUMBERCategory 6 Unshielded Twisted Pair (UTP) Fully Loaded 1U 24 port patch panel - UL approved CAT6+UTP24K

Unloaded 1U 24 Port Keystone Panel Frame for use with keystone jacks PANEL24KEYSTONE

Category 6 modular keystone jack Unshielded Twisted Pair (UTP) patch panels conform to class E performance. Each port is made up from individual modular RJ45 keystone jacks. Each

jack can be easily removed from the patch panel for individual termination and has a wiring diagram to assist termination to either 568A or B wiring standards.


24Ports

Features > RJ45 24 port fully loaded 1U panel > 19” rack mountable > Krone style IDC > Rear cable management bar included > Supplied with fixings > Ports numerically identified

> Category 6 > EN50173-1 : 2002 > EIA/TIA 568A/B Wiring standard > ANSI/EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements

of RoHS2 > UL approved

Applications

Conformance




OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP KEYSTONE JACK PATCH PANEL


Opt

roni

cs C

ateg

ory

611


Panel Frame Carbon Steel Frame, Plastic Powder Clad





DESCRIPTION PART NUMBERCategory 6 Unshielded Twisted Pair UTP Tool Free Keystone 1U 24 port patch panel - UL approved CAT6+UTP24TJ

Category 6 UTP Tool Free Panel

Category 6 Unshielded Twisted Pair (UTP) tool free patch panels conform to class E performance. These panels offer termination using the latest in tool free keystone jack technology.

The use of an insertion tool is not required when terminating these panels. Available in a 1U 24 port format, panels are supplied fully loaded with rear management bars and fixings.


> RJ45 24 port fully loaded 1U panel > 19” rack mountable > Saves valuable installation time > Supplied with fixings > Loaded with 180° tool free keystone jacks > Ports numerically identified > Includes rear cable management bar

Features

Applications

Conformance




> Category 6 > ISO/IEC 11801 : 2002 > EIA/TIA 568A/B wiring standard > ANSI/EIA/TIA 568B.2 : 2002 > EN50173-1 : 2002 > This product conforms to the materials requirements


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP TOOL FREE PANEL

24Ports


Opt

roni

cs C

ateg

ory

6

11

Category 6 UTP Patch Panel PCB Type

MECHANICAL VALUE Housing Material PBT + 15% GF UL94V-0

Panel Frame Carbon Steel, Powder Coating

Contact Material PC UL94V-0 Contact: Phosphor Bronze + Nickel Plating




Category 6 Printed Circuit Board (PCB) Unshielded Twisted Pair (UTP) patch panels conform to class E performance. Backwards compatible with category 5e distribution systems. The PCB is fully sealed for extra protection, and in-line IDC

blocks. Wiring diagram, assists termination to either 568A or B wiring standards. Available in 1U 24 port or 2U 48 port. All panels are supplied with rear cable management bars and fixings.


Category 6 1U 24 Port Printed Circuit Board (PCB) patch panel - UL approved CAT6+UTP24PCB

Category 6 2U 48 Port Printed Circuit Board (PCB) patch panel - UL approved CAT6+UTP48PCB

> 19” rack mountable > Ports numerically identified > RJ45 24 port 1U or 48 port 2U options > 110 style IDC punch down > Removable label area > Supplied with fixings > Rear cable management bar included

Features

Applications

Conformance



> Category 6 > ISO/IEC 11801 : 2002 > EIA/TIA 568A/B Wiring standard > ANSI/EIA/TIA 568B.2 : 2002 > EN50173-1 : 2002 > This product conforms to the materials requirements of

RoHS2 > UL approved


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP PATCH PANEL

24Ports


Opt

roni

cs C

ateg

ory

611


Panel Frame Zinc Plating, Powder Coating





Category 6 24 Ports Right Angle Panel


Category 6 Unshielded Twisted Pair (UTP) 1U 24 Port 90 degree patch panel UL approved CAT6+UTP24RA

Category 6 Unshielded Twisted Pair (UTP) patch panels conform to class E performance. Each panel is produced using a right angled (90°) frame design for flat termination onto the IDC blocks. This ensures termination and general management is quick and easy when

working with bulky horizontal cables. Integral cable management also provides a solid platform for fixing and managing cable entry. Each port has its own 8 pin IDC block including a wiring diagram. Available in 1U 24 port format, panels are supplied with fixings.



> 19” rack mountable > Integral cable management > RJ45 24 port 1U > Ports numerically identified > Right angle (90°) design > Printed label area > Supplied with fixings



> Category 6 > ISO/IEC 11801 : 2002 > EIA/TIA 568A/B wiring standard > ANSI/EIA/TIA 568B.2 : 2002 > EN50173-1 : 2002 > This product conforms to the materials requirements


Features

Applications

Conformance

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 24 PORTS RIGHT ANGLE PANEL

24Ports


Opt

roni

cs C

ateg

ory

6

11

Category 6 STP Patch Panel



> Fully screened for EMI protection

Category 6 Shielded Twisted Pair (STP) patch panels conform to class E performance and are backwards compatible with category 5e distribution systems. Each shielded panel is produced using a right angled (90°) frame design for flat termination onto the IDC blocks. This ensures termination, grounding and general management is quick and easy, when

working with category 6 shielded cables. Cable grounding is achieved by using the shielding clamps located to the rear of the integral cable management. Each port has its own 8 pin IDC block. The panel includes an overall sliding cover which gives extra screening against EMI and protects the terminations.


> 19” rack mountable > Ports numerically identified > RJ45 24 port 1U > Right angle (90°) design > Supplied with fixings and earthing wire > Integral cable management > Grounding clamps

Features

Applications

Conformance > Category 6 > ISO/IEC 11801 : 2002 > EIA/TIA 568A/B Wiring standard > ANSI/EIA/TIA 568B.2 : 2002 > EN50173-1 : 2002 > This product conforms to the materials requirements of

RoHS2 > UL approved


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 STP PATCH PANEL

24Ports


Panel Frame Zinc Plating, Powder Coating






Category 6 Shielded Twisted Pair (STP) 1U 24 Port patch panel - UL approved CAT6+STP24


Opt

roni

cs C

ateg

ory

611

Category 6 UTP Keystone Tool Free Jack

Category 6 Unshielded Twisted Pair (UTP) tool free keystone jacks conform to class E standards. They follow the industry standard RJ45 footprint and, due to the small form design, they

are perfect for high density Applications. The keystone jack requires no insertion tool for termination.


> Small form RJ45 footprint design > 180° termination > IDC tool free punch down > Reduces installation time > Supplied in boxes of 20pcs > Wiring diagram and conductor cap supplied


> Ideal for high density installations > Backwards compatible with category 5e distribution system

> Category 6 > ISO/IEC 11801 : 2002 > ANSI/EIA/TIA 568B.2 : 2002 > This product conforms to the materials requirements of

RoHS2 > UL approved

Features

Applications

Conformance


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP KEYSTONE TOOL FREE JACK







Category 6 Unshielded Twisted Pair Free keystone jack – White - Box of 20pcs - UL approved CAT6+JACKTJ


Opt

roni

cs C

ateg

ory

6

11

Category 6 STP Keystone Jack

Category 6 Shielded Twisted Pair (STP) keystone jacks conform to class E performance. They follow the industry standard RJ45

footprint and due to the small form design they are perfect for high density applications.

> Small form RJ45 footprint design > Tool less termination > High performance > Fully shielded for EMI protection > Wiring diagram and conductor cap supplied


> Ideal for high density installations > Ideal for environments sensitive to EMI > Backwards compatible with category 5e distribution

systems


RoHS2 > UL approved

Features

Applications

Conformance



Representative image of a loaded angled module with a category 6 UTP keystone jack (please note angled module is sold separately).

MECHANICAL VALUE Housing Material PC UL94V-0Shielding Material Brass 0.30mm + Nickel PlatingInsert Material Flame retardant ABS UL94V-0IDC Material Phosphor Bronze Stamp Pin 0.35mmContact Material Phosphor Bronze + Gold Plating 0.50mmRJ45 Jack Life Min 750 InsertionsIDC Life Min 250 Terminations

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 STP KEYSTONE JACK


Category 6 Shielded Twisted Pair (STP) keystone jack UL approved CAT6+JACK180STP


Opt

roni

cs C

ateg

ory

611

Category 6 UTP Keystone Jack

Category 6 Unshielded Twisted Pair (UTP) keystone jacks conform to class E performance. They follow the industry standard keystone jack footprint and, due to their small form design, they are perfect for high density applications.

Each jack is available with a 180° termination design, wiring diagram and conductor protection cap and can be supplied in black or white variants.

> Small form RJ45 footprint design > IDC punch down > 180° termination > High performance > Available in black/white, with or without shutter > Wiring diagram and conductor cap supplied > Supplied in boxes of 20pcs


> Ideal for high density installations > Backwards compatible with category 5e distribution

systems

> Category 6 > ISO/IEC 11801 : 2002 > ANSI/EIA/TIA 568B.2 : 2002 > This product conforms to the materials requirements

of RoHS2 > 3P approved (3rd party approval as part of permanent

link using cable and panel) > UL approved

Features

Applications

Conformance

Ordering InformationDESCRIPTION PART NUMBERCategory 6 Unshielded Twisted Pair (UTP) keystone jack White Box of 20pcs - UL approved - 3P CAT6+JACK180WH

Category 6 Unshielded Twisted Pair (UTP) keystone jack Black - Box of 20pcs - UL approved - 3P CAT6+JACK180BK

Category 6 Unshielded Twisted Pair (UTP) Shuttered keystone jack White - Box of 20pcs - UL approved - 3P

CAT6+JACK180WHS

Category 6 Unshielded Twisted Pair (UTP) Shuttered keystone jack Black - Box of 20pcs - UL approved - 3P

CAT6+JACK180BKS

Representative image of a loaded angled module with a category 6 UTP keystone jack (please note angled module is sold separately).

Technical SpecificationsMECHANICAL VALUE Housing Material PC UL94V-0IDC Material Phosphor Bronze Stamp Pin 0.35mmContact Material Phosphor Bronze + Gold Plating 0.50mmRJ45 Jack Life Min 750 InsertionsIDC Life Min 250 Terminations

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP KEYSTONE JACK


Opt

roni

cs C

ateg

ory

6

11

Category 6 UTP Euro Module

Category 6 Unshielded Twisted Pair (UTP) 25x50mm shuttered, moulded, modules (Euro Mod) conform to class E performance. They feature a slim line design, which is an ideal solution for shallow floor box or dado trunking applications.

Each module is supplied with a slide-in label area, for easy and clear outlet identification, and a mini cable-tie. Suits British Standard faceplates only.

> Complete shuttered module with PCB technology > Slim line design for shallow Applications > IDC punch down > Wiring diagram and mini cable tie supplied > Supplied in boxes of 20pcs > Compatible with UK faceplates


> Installations with limited space > Backwards compatible with category 5e distribution systems

> Category 6 > ANSI/EIA/TIA 568B.2 : 2002 > ISO/IEC 11801 : 2002 > This product conforms to the materials requirements of

RoHS2 > UL approved

Features

Applications

Conformance



Category 6 Unshielded Twisted Pair (UTP) 50x25mm Shuttered Moulded Module - White - Box of 20pcs - UL approved

CAT6+FACEMODULE

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 UTP EURO MODULE

MECHANICAL VALUEHousing Material PC UL94V-0






Opt

roni

cs C

ateg

ory

611

> Fully loaded / completed outlets > Reduced installation time > Wiring diagram and mini cable tie supplied > Supplied in boxes of 10pcs > Fixing screws, labelling supplied

Features > Supports category 6 networks running up to 500 MHz

applications > Backwards compatible with category 5e distribution

systems

Applications


RoHS2

ConformanceMECHANICAL VALUEIDC Material Phosphor Bronze Stamp Pin 0.35mm






Single gang - 2 position86x86mm - Box of 10pcs FACEPLATE2PBEV Single gang - 2 position


Double gang - 4 position86x147mm - Box of 10pcs FACEPLATE4PBEV Double gang - 4 position


Angled module and jack 86x86mm - Box of 10pcs CAT6+FACE1PBEVJ Angled module and jack

86x86mm - Box of 10pcs CAT6+FACE1PFLTJ

Angled module and jack 86x86mm - Box of 10pcs CAT6+FACE2PBEVJ Angled module and jack


Angled module and jack86x147mm - Box of 10pcs CAT6+FACE4PBEVJ Angled module and jack


Box of 20pcs ANGLEDMODULE 50x25mmBox of 50pcs HALFBLANK

50x12.5mm Box of 100pcs SINGLEBLANK Euro module and Jack

86x86mm - Box of 10pcs CAT6+FACE2PBEVM

Euro module and Jack 86x86mm - Box of 10pcs CAT6+FACE1PBEVM Euro module and Jack

86x147mm - Box of 10pcs CAT6+FACE4PBEVM

Category 6 Faceplates

OPTRONICS COPPER CABLING SYSTEM | CAT6 FACEPLATES



Opt

roni

cs C

ateg

ory

6

11


Euro module and jack 86x86mm - Box of 10pcs CAT6+FACE1PFLTM

Category 6 Single Port European Outlet with Jack -

Box of 10pcsCAT6+FACE1PFRA

Euro module and jack 86x86mm - Box of 10pcs CAT6+FACE2PFLTM

Category 6 Double Port European Outlet with Jack -


Euro module and jack86x147mm - Box of 10pcs CAT6+FACE4PFLTM

Category 6 Quad Port European Outlet with Jack -


OPTRONICS COPPER CABLING SYSTEM | CAT6 FACEPLATES


Opt

roni

cs C

ateg

ory

611

Technical Specification Ordering Information

Single and Double Port Mounted Keystone Box

DESCRIPTION 1-PORT BOX W/O SHUTTER

2-PORT BOX W/O SHUTTER

Material ABS, UL94V-0 ABS, UL94V-0

Length (mm) 30 30

Width (mm) 50 50

Depth (mm) 30 30

Colour White White

DESCRIPTION PART NUMBERSingle port mounted box, without shutter - White CAT6BOX1PJ

Double port mounted box, with-out shutter - White CAT6BOX2PJ

OPTRONICS | WORK AREA OUTLETS KEYSTONE BOXES

1-port w/ shutter (37 × 65 × 30 mm)

2-port w/ shutter (63 × 65 × 30 mm)

1. Identification2. Box3. Dust Cover4. Insert

1. Identification2. Box3. Dust Cover4. Insert

Drawing


Opt

roni

cs C

ateg

ory

6

11

Category 6 U/UTP Patch Cords

Category 6 Unshielded Twisted Pair (U/UTP) patch cords conform to class E standards. Our patch cords are made to the highest standards, using only quality stranded cable, giving you the best in flexibility, plus top grade 50μ gold plated RJ45 connector plugs, for high quality connections. This combination makes for outstanding performance and reduced degradation.

All patch cords are produced with a injection moulded boot with an easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties. For best performance we recommend you use these as part of a full Optronics category 6 system.

> Quality 24AWG stranded (flexible) cable > High grade 50μ gold plated RJ45 connector > Injection moulded boot for improved strain relief > Soft latch-cover design for easy depression

Features

> Supports category 6 (class E) networks running up to 250MHz applications

> Backwards compatible with category 5e distribution system

Applications


RoHS2 > REACH > UL listed

Conformance


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 U/UTP PATCH CORDS

CONSTRUCTION VALUE

ConductorsAWG 24Size (mm) 7/0.20 +/- 0.008Material Bare Copper


Jacket External O.D. 6.0 +/- 0.20Thickness (mm) 0.5Material PVC or LSZH

PE Cross Member


Insulation Coating

Jacket PVC or LSZH


on PVC Patch Cords


on LSZH Patch Cords

U/uTP


Opt

roni

cs C

ateg

ory

611

PART NUMBER METRE

GRE

Y

UTP6GY0.5-PVC 0.5

UTP6GY1-PVC 1

UTP6GY2-PVC 2

UTP6GY3-PVC 3

UTP6GY5-PVC 5

UTP6GY10-PVC 10

BLA

CK

UTP6BK0.5-PVC 0.5

UTP6BK1-PVC 1

UTP6BK2-PVC 2

UTP6BK3-PVC 3

UTP6BK5-PVC 5

UTP6BK10-PVC 10

PART NUMBER METRE

GRE

Y

UTP6GY0.5-LSZH 0.5

UTP6GY1-LSZH 1

UTP6GY2-LSZH 2

UTP6GY3-LSZH 3

UTP6GY5-LSZH 5

UTP6GY10-LSZH 10

BLA

CK

UTP6BK0.5-LSZH 0.5

UTP6BK1-LSZH 1

UTP6BK2-LSZH 2

UTP6BK3-LSZH 3

UTP6BK5-LSZH 5

UTP6BK10-LSZH 10

PART NUMBER METRE

YELL

OW

UTP6YE0.5-PVC 0.5

UTP6YE1-PVC 1

UTP6YE2-PVC 2

UTP6YE3-PVC 3

UTP6YE5-PVC 5

UTP6YE10-PVC 10RE

DUTP6RD0.5-PVC 0.5

UTP6RD1-PVC 1

UTP6RD2-PVC 2

UTP6RD3-PVC 3

UTP6RD5-PVC 5

UTP6RD10-PVC 10

WH

ITE

UTP6WH0.5-PVC 0.5

UTP6WH1-PVC 1

UTP6WH2-PVC 2

UTP6WH3-PVC 3

UTP6WH5-PVC 5

UTP6WH10-PVC 10

PART NUMBER METRE

YELL

OW

UTP6YE0.5-LSZH 0.5

UTP6YE1-LSZH 1

UTP6YE2-LSZH 2

UTP6YE3-LSZH 3

UTP6YE5-LSZH 5

UTP6YE10-LSZH 10

RED

UTP6RD0.5-LSZH 0.5

UTP6RD1-LSZH 1

UTP6RD2-LSZH 2

UTP6RD3-LSZH 3

UTP6RD5-LSZH 5

UTP6RD10-LSZH 10

WH

ITE

UTP6WH0.5-LSZH 0.5

UTP6WH1-LSZH 1

UTP6WH2-LSZH 2

UTP6WH3-LSZH 3

UTP6WH5-LSZH 5

UTP6WH10-LSZH 10

PART NUMBER METRE

BLU

E

UTP6BL0.5-PVC 0.5

UTP6BL1-PVC 1

UTP6BL2-PVC 2

UTP6BL3-PVC 3

UTP6BL5-PVC 5

UTP6BL10-PVC 10

GRE

EN

UTP6GN0.5-PVC 0.5

UTP6GN1-PVC 1

UTP6GN2-PVC 2

UTP6GN3-PVC 3

UTP6GN5-PVC 5

UTP6GN10-PVC 10

ORA

NG

E

UTP6OR0.5-PVC 0.5

UTP6OR1-PVC 1

UTP6OR2-PVC 2

UTP6OR3-PVC 3

UTP6OR5-PVC 5

UTP6OR10-PVC 10

PART NUMBER METRE

BLU

E

UTP6BL0.5-LSZH 0.5

UTP6BL1-LSZH 1

UTP6BL2-LSZH 2

UTP6BL3-LSZH 3

UTP6BL5-LSZH 5

UTP6BL10-LSZH 10

GRE

EN

UTP6GN0.5-LSZH 0.5

UTP6GN1-LSZH 1

UTP6GN2-LSZH 2

UTP6GN3-LSZH 3

UTP6GN5-LSZH 5

UTP6GN10-LSZH 10

ORA

NG

E

UTP6OR0.5-LSZH 0.5

UTP6OR1-LSZH 1

UTP6OR2-LSZH 2

UTP6OR3-LSZH 3

UTP6OR5-LSZH 5

UTP6OR10-LSZH 10

PVC

LSZH

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 U/UTP PATCH CORDS


Opt

roni

cs C

ateg

ory

6

11

Category 6 F/UTP Patch Cords

Category 6 Foiled Twisted Pair (F/UTP) patch cords conform to class E standards. Our patch cords are made to the highest standards, using only quality stranded cable, giving you the best in flexibility, plus, top grade 50μ gold plated RJ45 connector plugs, giving high quality connections. This combination makes for outstanding performance and reduced degradation. Aluminium tape is used to shield all 4 pairs; this gives a screened

protection against external interference such as EMI.

All patch cords are produced with a injection moulded boot with easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties. For best performance we recommend you use these as part of a full Optronics category 6 system.

> Quality 26 AWG stranded (flexible) cable > High grade 50μ gold plated RJ45 connector > injection moulded boot for improved strain relief > Soft latch-cover design for easy depression

Features


> Ideal for environments where heavy external interference can disrupt signal such as EMI

> Backwards compatible with category 5e distribution system

Applications


RoHS2 > REACH > UL listed

Conformance


OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 F/UTP PATCH CORDS

CONSTRUCTION VALUE

ConductorsAWG 26Size (mm) 0.915 +/- 0.008Material Bare Copper


Jacket External O.D. 6.0 +/- 0.20Thickness (mm) 0.5Material PVC or LSZH

TapeMaterial Mylar & Aluminium MylarCoverage (%) 125

PE Cross Member


Insulation Coating

Foil

Jacket LSZH


on PVC Patch Cords


on LSZH Patch Cords

F/uTP


Opt

roni

cs C

ateg

ory

611

PART NUMBER METRE

GRE

Y

FTP6GY0.5-PVC 0.5

FTP6GY1-PVC 1

FTP6GY2-PVC 2

FTP6GY3-PVC 3

FTP6GY5-PVC 5

FTP6GY10-PVC 10

BLA

CK

FTP6BK0.5-PVC 0.5

FTP6BK1-PVC 1

FTP6BK2-PVC 2

FTP6BK3-PVC 3

FTP6BK5-PVC 5

FTP6BK10-PVC 10

PART NUMBER METRE

YELL

OW

FTP6YE0.5-PVC 0.5

FTP6YE1-PVC 1

FTP6YE2-PVC 2

FTP6YE3-PVC 3

FTP6YE5-PVC 5

FTP6YE10-PVC 10

RED

FTP6RD0.5-PVC 0.5

FTP6RD1-PVC 1

FTP6RD2-PVC 2

FTP6RD3-PVC 3

FTP6RD5-PVC 5

FTP6RD10-PVC 10

WH

ITE

FTP6WH0.5-PVC 0.5

FTP6WH1-PVC 1

FTP6WH2-PVC 2

FTP6WH3-PVC 3

FTP6WH5-PVC 5

FTP6WH10-PVC 10

PART NUMBER METRE

BLU

E

FTP6BL0.5-PVC 0.5

FTP6BL1-PVC 1

FTP6BL2-PVC 2

FTP6BL3-PVC 3

FTP6BL5-PVC 5

FTP6BL10-PVC 10

GRE

EN

FTP6GN0.5-PVC 0.5

FTP6GN1-PVC 1

FTP6GN2-PVC 2

FTP6GN3-PVC 3

FTP6GN5-PVC 5

FTP6GN10-PVC 10

ORA

NG

E

FTP6OR0.5-PVC 0.5

FTP6OR1-PVC 1

FTP6OR2-PVC 2

FTP6OR3-PVC 3

FTP6OR5-PVC 5

FTP6OR10-PVC 10

PART NUMBER METRE

GRE

Y

FTP6GY0.5-LSZH 0.5

FTP6GY1-LSZH 1

FTP6GY2-LSZH 2

FTP6GY3-LSZH 3

FTP6GY5-LSZH 5

FTP6GY10-LSZH 10

BLA

CK

FTP6BK0.5-LSZH 0.5

FTP6BK1-LSZH 1

FTP6BK2-LSZH 2

FTP6BK3-LSZH 3

FTP6BK5-LSZH 5

FTP6BK10-LSZH 10

PART NUMBER METRE

YELL

OW

FTP6YE0.5-LSZH 0.5

FTP6YE1-LSZH 1

FTP6YE2-LSZH 2

FTP6YE3-LSZH 3

FTP6YE5-LSZH 5

FTP6YE10-LSZH 10

RED

FTP6RD0.5-LSZH 0.5

FTP6RD1-LSZH 1

FTP6RD2-LSZH 2

FTP6RD3-LSZH 3

FTP6RD5-LSZH 5

FTP6RD10-LSZH 10

WH

ITE

FTP6WH0.5-LSZH 0.5

FTP6WH1-LSZH 1

FTP6WH2-LSZH 2

FTP6WH3-LSZH 3

FTP6WH5-LSZH 5

FTP6WH10-LSZH 10

PART NUMBER METRE

BLU

E

FTP6BL0.5-LSZH 0.5

FTP6BL1-LSZH 1

FTP6BL2-LSZH 2

FTP6BL3-LSZH 3

FTP6BL5-LSZH 5

FTP6BL10-LSZH 10

GRE

EN

FTP6GN0.5-LSZH 0.5

FTP6GN1-LSZH 1

FTP6GN2-LSZH 2

FTP6GN3-LSZH 3

FTP6GN5-LSZH 5

FTP6GN10-LSZH 10

ORA

NG

E

FTP6OR0.5-LSZH 0.5

FTP6OR1-LSZH 1

FTP6OR2-LSZH 2

FTP6OR3-LSZH 3

FTP6OR5-LSZH 5

FTP6OR10-LSZH 10

PVC

LSZH

OPTRONICS COPPER CABLING SYSTEM | CATEGORY 6 F/UTP PATCH CORDS



Category 5eCable 43

Patch Panels 47

Keystone Jacks 51

Euro Modules 54

Faceplates 55

Work Area Outlets Keystone Boxes 57

Patch Cords 58

Date post:	03-Aug-2020
Category:	Documents
Upload:	others
View:	10 times
Download:	1 times

Copper Structured Cabling Solutions...structured cabling solutions. Optronics products are designed,...

Documents