Copyright © 2015 NEXUS COMPONENTS GmbH 2Version 4.5 Company profile Head office in Braunschweig...

Copyright © 2015 NEXUS COMPONENTS GmbH

2 Version 4.5

Company profile

Head office in Braunschweig

Offices and production plants in Taiwan and China


3 Version 4.5

Company profile

Offices in AsiaNEXUS COMPONENTS and our partner Tiger Technology Inc. run offices in Taipei, Shenzhen and Shanghai. More than 100 employees care for production management for

worldwide demands

quality control in accordance with certified international standards

professional logistics and worldwide shipping


4 Version 4.5

Company profile

Manufacturing facilities in AsiaNEXUS COMPONENTS and its partners operate manufacturing facilities in Taiwan, Hong Kong and China as a Corporate Joint Venture. More than 1,000 qualified and motivated employees care for “in time” production.

Continuous quality checks in accordance with certified European and international standards ensure high quality products.


5 Version 4.5

Company profile

Production plant in Shanghai/China


6 Version 4.5

Company profile

Facilities

Sales Europe: Braunschweig / Germany

Headquarters: Taipeh / Taiwan

Production: Shanghai / China

QA and R&D: Shenzhen / China

Europe

Asia

Sales North America: Denver / USA

Sales South America: Guadalajara / MexicoAmerika


7 Version 4.5

Company profile

HeadquartersTaipei / Taiwan

Sales EuropeBraunschweig / Germany

ProductionShanghai / China

Sales North AmericaDenver / USA

QA, R&DShenzhen / China

Sales South AmericaGuadalajara / Mexico


8 Version 4.5

Company profile

Contact persons

Wilfried RusniokManagement, Sales Key Account

Thorsten WildrichSales

Angela AuchOrder Processing and Accounting

Carsten BöhmQuality Assurance

Dirk TetenbergSales and Marketing

Ina BrackmannOrder Processing and Sales


9 Version 4.5

Company profile

Quality policy

The highest quality standard is one of our most important business goals.

All employees are regularly trained and highly motivated due to the friendly coexistence.

Reliable quality controls and the determined dedication of all employees guarantee the achievement of our goals.

NEXUS COMPONENTS is certified according to DIN EN ISO 9001 since 2005


10 Version 4.5

Company profile

Sustainability

NEXUS COMPONENTS offers only RoHS and RoHS-II complaint products

In 2005 almost 95% of all products were already lead-free

All products are suitable for lead-free, high temperature soldering

PBT plastics have been mostly replaced by Nylon

Products are not subject to registration according to REACh and do not contain any SVHC

Products do not contain DecaBDE


11 Version 4.5

Customers

EMS/OEM


12 Version 4.5

Customers

Telecommunication

Consumer electronic


13 Version 4.5

Customers

Mobility/Payment Systems

Security


14 Version 4.5

Customers

Embedded Systems

Industrial


15 Version 4.5

Company profile

Connectors and sockets

Cable assembly

Inductors

Metal parts

Consumer electronic (US only)

Products


16 Version 4.5

Products

Board to Board-Connectors

from 0.5 mm pitch, 1 to 4 rows

customer defined pin length, keying and special types


17 Version 4.5

Products

FPC-Socket, FFC-Flat Foil Cable

FPC-Socket from 0.3 mm pitch, upper and lower contacts

ZIF, LIF and Easy-Lock

Flat-Foil-Cable 0.5 mm, 1.0 mm and 1.25 mm pitch, shielded and non-shielded


18 Version 4.5

Products

Wire to Board-/Wire to Wire-Connectors

1 mm to 8 mm pitch

all common configurations

1 Amp to 20 Amp

Cable assembly according to customer specification


19 Version 4.5

Products

Memory Card Socket

PCMCIA

CF Card Socket and Card Housing

SD and Micro SD Card Socket

SIM, Micro SIM and Nano SIM Card Socket

Micro MMC, XD, Multi Card and Express Card Socket


20 Version 4.5

Products

Digital I/O

USB-, Micro-USB, Mini-USB

SATA, eSATA, SAS and Combo SATA-USB

HDMI: numerous connectors and adaptors

DVI, IEEE1394


21 Version 4.5

Products

Western Modular

Single- and Multiport up to 16 Ports

4P2C to 10P10C

with LED and without LED

Gigabit Ethernet, customer defined wiring

Side-, Top- and Bottom-Entry and special types


22 Version 4.5

Products

Audio/Video

Mini-DIN 3 – 10 contacts, GEO-Port

RCA, 1- to 12-gang

Audio connectors, shielded and non-shielded

SCART

numerous combo modules Cinch, Mini-DIN, Audio and SCART


23 Version 4.5

Products

D-Sub, HD D-Sub and Power D-Sub

D-Sub, HD D-Sub, IDC for flat cable

Power D-Sub up to 40 Amp, RF D-Sub with COAX

Centronics


24 Version 4.5

Products

RF-Connectors

F, IEC, BNC

SMA, SMB, SSMA, SSMB

MMCX, IPEX

numerous adaptors


25 Version 4.5

Products

Card Edge

DDR-DIMM II/III

PCI-Express, Mini-PCI, Mini-PCI-Express

PCI, AGP and ISA from 0.80 to 3.96 mm pitch


26 Version 4.5

Products

AC/DC Connectors

DC-Connectors from 0.65 to 2.50 mm contact size

AC-Connectors C6, C8, C13 and C14


27 Version 4.5

Products

Switches

Micro Switches, DIP-Switches

Push- and Rocker Switches

Power Switches for PCB and Panel Mount


28 Version 4.5

Products

Waterproof

M8 IP67 up to M24 IP68

Circular connectors 10 and 16 Amp IP67

USB and RJ45


29 Version 4.5

Cable assembly

Cable assemblyCable assembly is a sophisticated process. As your professional partner, we consider this process as one and offer our support from design to final production of the cable product.

Our long-standing experience enables us to support you in developing ideas and approaches that fit your requirements, and together we create the desired product.


30 Version 4.5

Cable assembly

Round and flat cable

Audio and video cable

Signal lines

RF cable

Cable for telecommunications

Cable for network

Mixed-Mode cable

Cable assembly by customer specification

We are game for anything


31 Version 4.5

Products

The requirements on the components used are often as unique as the product itself. And sometimes it's just a better idea to "reinvent the wheel".

We at NEXUS COMPONENTS supplement you in all stages of the project as your professional partner:

Create proposed solutions for your projects

Joint development of connectors

Manufacturing according to customer specification

Customized Connectors


32 Version 4.5

Products

Our range of services covers all processes to complete your project quickly:

Drafting - also 3D model creation if needed

Rapid prototyping - even without previous tooling

Short-term tooling assembly

Initial samples for release - with test report on request

Volume production of excellent quality at a familiar low price

Customized Connectors

Customized connectors - in no time from concept to production.

Challenge us - we look forward.


33 Version 4.5

Products

Lead times

Connectors 6 weeks Western Modular without Transformers 7 weeks Western Modular with Transformers 10 weeks Inductors 10 weeks Cable assembly 12 weeks

All information above is related to air freight shipping. Sea freight shippingextends lead times by 6 weeks.


34 Version 4.5

Online Catalog

Cutting edge, intuitive, in depthOur entire product range is available in our online catalog: always accessible, always up to date, clearly structured and easy to use.

You will find all the components in detail, pictures and PDF data sheet. An ingenious search will let you find the desired component in seconds - simply based on keyword, series, or item number.

www.connectors-catalog.com

Thank you for your kind attention

Date post:	11-Dec-2015
Category:	Documents
Upload:	julianne-troth
View:	213 times
Download:	0 times

Copyright © 2015 NEXUS COMPONENTS GmbH 2Version 4.5 Company profile Head office in Braunschweig...

Documents