Copyright Statement20&%20WP960%20User%20Manual.pdfZTE WP560/960 User Manual 2 Safety Precaution 2.1...

Copyright Statement

Copyright © 2005 by ZTE Corporation

The copyright of this User Manual belongs to ZTE Corporation and under

the protection of Copyright Law of the People’s Republic of China and other

relative laws.

No part of this publication may be excerpted，reproduced, translated or

utilized in any form or by any means (electronic or mechanical，including

photocopying and microfilm) without prior written permission from ZTE

Corporation. Any violation behavior will be punished.

The information in the document is subject to change without notice. At the

same time we reserve the right to revise or recall the User Manual.

If there is anything unclear in this manual, please contact us or our agent or seller.

1st version, March, 2005

Contents

1 Function Introduction................................................................................. 1

2 Safety Precaution ....................................................................................... 4 2.1 During operation ................................................................................. 4 2.2 Use environment ................................................................................. 4 2.3 Battery & Adapter ............................................................................... 5

3 Checking the parts...................................................................................... 5 4 Instruction Icons in User Manual ............................................................... 7 5 FWP Installation......................................................................................... 7

5.1 Installing antenna ................................................................................ 7 5.1.1 Installing Indoor Antenna............................................................. 7 5.1.2 Installing Outdoor Antenna .......................................................... 8 5.1.3 Connection between outdoor antenna and FWP......................... 10 5.1.4 Lightening arrest measures......................................................... 10

5.2 Installing the FWP............................................................................. 12 5.3 Service Status Check......................................................................... 17

6 Getting to know your FWP ...................................................................... 18 6.1 Main parts ......................................................................................... 18 6.2 Keys .................................................................................................. 19 6.3 Display icons..................................................................................... 21

7 Calling function........................................................................................ 23 7.1 Make a call ........................................................................................ 23 7.2 Receive a call .................................................................................... 24 7.3 Redial ................................................................................................ 25 7.4 Pause ................................................................................................. 25 7.5 Emergency Call ................................................................................. 26

8 Optional Function..................................................................................... 27

8.1 Three-way Calling............................................................................. 27 8.2 Call Forwarding ................................................................................ 27 8.3 Call Waiting....................................................................................... 28 8.4 Call Setting........................................................................................ 28

8.4.1 Hot Line ..................................................................................... 28 8.4.2 Call Restrict................................................................................ 29 8.4.3 Originate Mode .......................................................................... 31 8.4.4 Ring Tone ................................................................................... 32 8.4.5 Auto Hyphen .............................................................................. 32

9 Short Message .......................................................................................... 33 9.1 Create New........................................................................................ 34 9.2 Receive and Send Message. .............................................................. 35

9.2.1 View Inbox ................................................................................. 35 9.2.2 View Outbox .............................................................................. 37 9.2.3 Voice Message............................................................................ 39 9.2.4 SMS Setting ............................................................................... 40

10 Message Saving...................................................................................... 42 10.1 Phonebook....................................................................................... 42

10.1.1 View book ................................................................................ 42 10.1.2 Search book.............................................................................. 45 10.1.3 Add entry.................................................................................. 47 10.1.4 Speed Dial ................................................................................ 48

10.2 Call History ..................................................................................... 50 10.2.1 Incoming Call........................................................................... 51 10.2.2 Outgoing Call ........................................................................... 51 10.2.3 Missed Call............................................................................... 52 10.2.4 Call Time.................................................................................. 52

11 Setting . ............................................................................................... .53

11.1 Greeting........................................................................................... 53 11.2 Phone Number................................................................................. 54 11.3 Alarm............................................................................................... 54 11.4 Backlight ......................................................................................... 56 11.5 Volume............................................................................................. 56 11.6 Font ................................................................................................. 57

12 Data service............................................................................................ 58 13 Input method .......................................................................................... 58

13.1 English Input ................................................................................... 59 13.1.1 English Letter Input.................................................................. 59 13.1.2 English word input ................................................................... 59

13.2 Number Input .................................................................................. 60 13.3 Punctuation mark input ................................................................... 60

14 Power supply.......................................................................................... 61 15 FAQ .................................................................................................. .62 16 Specifications ....................................................................................... 63 17 Legal Statement...................................................................................... 64

ZTE WP560/960 User Manual

1 Function Introduction

Thank you for choosing WP560/960 Fixed Wireless Phone (FWP) of ZTE

Corporation. To keep your FWP under the best condition, please read this manual

carefully before use, and please keep this manual well in case of future use.

1


WP560/960 series of CDMA FWP have the following functions： Voice service Function Description Making a call After applying to the local telecom operator for relevant voice

services, you can use the FWP to make local, domestic long-distance, international and IP calls

Receiving a call

You can use the FWP to receive incoming calls. If your FWP supports incoming call display and you have applied to the local telecom operator for incoming call display service, the incoming call number will be displayed on the FWP after a ringing

Emergency call Once the FWP can search out the local CDMA digital network, you can dial out the local emergency call numbers preset in the FWP to seek for help in case of emergency

Handfree talk /preset dialing

You can make or receive a call without picking up the handset.

Redial Redial the last outgoing number Call Delay Insert dial delay during dialing. Call forwarding

This function forwards an incoming call to another telephone you specify no matter the FWP is powered off or not.

Call waiting

If there is a second incoming call when a call is in progress, you can choose to receive or reject the second call. If you choose to receive it, you can switch between the two calls.

Three-way calling

This function allows three parties to have a talk simultaneously. You have to apply to the local telecom operator for this service.

Call Restrict You can restrict a user to make or receive calls ( including domestic and international long-distance calls) via setting

No-interfere Reject the incoming calls from the system side. Hotline mode Via setting, you can only make preset hotline calls by pressing

<RD/CALL> key.

2


Data service

Function Description Internet access

services

You can enjoy internet access services including CDMA 2000 1X high-speed wireless file transmission, email receiving/sending and homepage exploration, etc. Dormancy function is also supported

PC fax You can use a PC to receive or send a fax. Asynchronous data

This service can enable you to realize low-rate

(9.6/14.4Kbps) file transmission and internet access

services.

Advanced function

Function Description

SMS

Send/receive messages, view new messages, delete messages, write new messages. The Inbox can save 50 messages, the Outbox can save 10 messages (with UIM-card)

Voice email Voice email based on message notification. Phonebook Can store 100 addresses (with UIM-card),20 groups

for speed dial (with UIM-card), supporting grouping function

Call record 50 Incoming call records;20 dialed call records, time record

Ring Tone 15 ring tones available for choice

Alarm 4 alarms and 9 ringings available for choice

Others Adjustable volume, 4 fonts available, ZI English input

method

3


2 Safety Precaution

2.1 During operation 1） The FWP may interfere with heart pacemaker, hearing aid and other

electronic medical devices, please follow the instructions given by your

equipment suppliers or consult your doctor during operation.

2） Do not disassemble the FWP.

3） If you clean the surface of the FWP, use only a dry, soft cloth with cleanser

containing no alcohol, benzene or acetone.

4） Don’t drop the FWP or have it hit by strong impact.

5） Please make sure that your terminal is powered off when you connect the

antenna to it; do not try to pull out the antenna after it's connected to your

terminal.

6） Use only the original antenna. Do not use the antenna for any other purpose.

2.2 Use environment

1） The product can only be installed indoors.

2） The phone’s working temperature is -10℃ ~ 55℃, don’t use it outside this

temperature range. When the environment temperature is too high or too low,

problems may occur.

3） Keep the product from dust, furnace or gas stove.

4） Don’t put it under humid environment to avoid being affected with damp,

otherwise the circuit board may be eroded and you may lose the data.

5） Keep the phone away from magnetic field and static electricity.

4


2.3 Battery & Adapter

1） Use only the original AC/DC power adapter. Don’t use the adapter for other

purposes.

2） The adapter must be used within the specified AC voltage range.

3） The phone will give an alert when the power is insufficient. To ensure normal

communication, charge or use the backup battery during low power (ensuring

the battery’s power is sufficient).

4） When the FWP do not work normally because of low battery power, please

turn off the power switch until the power is supplied by the adapter.

5） When the FWP is not connected with the power adapter and its power is only

supplied by battery, please charge the battery in time in case of low power to

avoid battery damage due to over-discharge.

6） Take out the battery if you won’t use the product for a long time.

7） Don’t use the power adapter if the power cable is damaged.

8） Dispose of the used battery in the way of environment protection.

3 Checking the parts

Once you have unpacked your FWP, make sure you have all the parts shown

below. If any piece is missing or broken, please call your customer service.

The product has 8 parts:

5


No. Name Q'ty Remark

1 FWP Host 1 Including an antenna.

2 Handset 1

3 AC/DC Adapter 1

4 Ni-MH Rechargeable Battery

1

5 Prints 3 User Manual, Warranty Card andCertificate of Qualification

6 USB cable 1 Optional

7 Software Disk 1 Optional

8 Screw 1 For fixing the battery cover Include the plastic package

To protect your own right, please carefully fill in Warranty Card so as to get

warranty right. If you don’t fill in Warranty Card or dismantle the FWP yourself, you

may lose the warranty right.

6


4 Instruction Icons in User Manual

Attentions or cautions Function overview

Operation guide Operation skill

5 FWP Installation

5.1 Installing antenna

You can choose to install indoor or outdoor antenna, this chapter will tell you

how to install an antenna.

Make sure to switch off your FWP, disconnect the power adapter and battery

before installing the antenna. Please do not pull the antenna out after it is installed. Do

not frequently revolve the antenna or circumrotate it by 360 degrees, for that will

affect signal reception capability and lifespan of the FWP.

5.1.1 Installing Indoor Antenna

Operation guide

When your FWP is near to the BTS, the signal is good, the indoor antenna

will be ok for you to get a good conversation quality. Please insert the indoor

antenna to the antenna port on your FWP and screw it to make sure it’s well

connected.

7


5.1.2 Installing Outdoor Antenna

Outdoor antenna has a better signal receiving ability than indoor antenna.

When your FWP is far away from the BTS and the signal is weak, you could use

an outdoor antenna to get a better conversation quality. If you are already using an

outdoor antenna, we will not provide extra indoor antennas.

We provide two kinds of outdoor antennas: omni antenna and directional

antenna. The omni antenna is easy to install, you don’t have to consider about

direction and position during installation. The directional antenna has a better

signal receiving ability, but its installation is more complicated than the omni

antenna. The following is the instructions for installing outdoor antenna.

Operation guide

1) Installing omni outdoor antennas

You should install the omni outdoor antennas perpendicular to the ground.

Please follow the instructions given in the manual contained in the box. The

antenna must be fixed with a non-metal pole.

8


2) Installing directional outdoor antennas

Choosing a good location for the directional outdoor antenna

Directional outdoor antennas should be installed perpendicular to the ground

in a higher place, e.g., roof, top of a building and hilltop, etc. In general, the

higher the installation position is, the stronger the signal receiving ability is.

If there are very high buildings or hill-like barriers between the directional

outdoor antenna and BTS, you’d better install the antenna at least 50 meters

away from the building or barrier. If possible, you should install the antenna

directly over the barrier. At the same time, to prevent signal interruption,

you’d better install the outdoor antenna as far as possible from the TV

antenna.

Installing the directional outdoor antenna.

Please perform this operation according to the instruction manual contained

in the box. The antenna must be fixed with a non-metal pole.

The direction of the directional outdoor antenna.

If a directional antenna is already installed, then its direction is critical to its

signal receiving ability. If you live in a flat zone, please direct your antenna

towards the BTS. If you live in a hilly area, please rotate your antenna until it

receives the strongest signal. As follows:

9


5.1.3 Connection between outdoor antenna and FWP

Operation guide

After the outdoor antenna is well installed, please connect the feeder line to

the outdoor antenna, tie it to a backstop and then place it down. After going

through a lightening arrester, connect the feeder line to your FWP, screw it tight

and make sure the connection is reliable. At the same time do not try to hang

heavy things on the cable line or drag/distort the cable. The feeder cable we

provide is about 15 meters long, don’t try to add power cable to lengthen it. If the

length is not enough, please contact us.

5.1.4 Lightening arrest measures

Because the outdoor antenna is normally installed at higher outdoor places,

you should consider lightning protection. We will provide you with detailed

lightening protection suggestions, please choose and buy the lightening rod and

arrester as suggested. Our company shall not be responsible if any accident

happens because of misoperations by users without following the instructions

(without installing lightening conductor as suggested) .

10


Please do not make calls on a lightening day if you have installed an outdoor

antenna.

Operation guide

1） Lightning rod

Please install the lightning rod near your outdoor antenna, the lightning rod

should be higher than your outdoor antenna, well grounded, and have a grounding

resistance less than 10ohm. Furthermore, the angle between the top of the rod and

the outmost point of the antenna shall not exceed 45 degree, and the horizontal

distance between the rod and the antenna shall not be shorter than 3 meters. See

below:

2） Lightening arrester

Please connect 2 meters of feeder cable to the antenna port on your FWP

before installing the lightning arrester. Connect the arrester to the outdoor antenna

through a 15-meter long feeder cable. In the middle of the lightening arrester is a

ground point, which is to be connected to a grounding line chosen according to

11


lightning arrest suggestions. Make sure that the line is well grounded.

5.2 Installing the FWP

Bottom View

① Battery cover

Back View

12


① Power Interface (DC 6V) ② Power Switch ③ USB Interface/ Serial Port Interface

Power on the FWP: move the power switch (see the picture above) to “ON”, the

FWP will give a “du” alert and enter into idle mode. Power off the FWP: move the

power switch (see the picture above) to “OFF”.

Installing the power adapter

The power for the FWP can be fed from the direct current output from the

power adapter which is connected to the indirect current power source.

Please connect the adapter with FWP’s power interface before connecting it with

external AC main supply.

Installing UIM card

If your FWP is without UIM card, you have to install UIM-card before use. When

you are installing UIM card, make sure your FWP’s power switch is in “OFF” state

and the external power supply is disconnected.

Please install the UIM-card first before installing the battery。

13


1. Remove the battery cover 2. Install UIM card (pay attention to UIM card’s cut corner position)

3. Follow the arrow to push the UIM-card into the card holder

Installing Battery

The FWP is equipped with a rechargeable built-in battery which can supply

power to the FWP when the power adapter is not available. When the power

adapter is supplying power to the FWP, it is also charging the battery.

When you are installing built-in battery, make sure your FWP’s power

switch is in “OFF” state and the external power supply is disconnected.

14


1. Remove the battery cover 2. Install battery (pay attention to polarity)

3. After battery installation 4. Install battery cover

For the first time use, please charge the Ni-MH battery for over 16 hours

non-stop. Attaching the handset

15


Connecting the FWP to a computer

Wall-Mount Installation

When in mount installation, plug out the anti-slip clip of handset as

shown in Fig. 1, and then reverse it and plug it back as shown in Fig. 2 to

avoid the slip of handset in mounting position.

Fig. 1 Fig. 2

16


5.3 Service Status Check

Display in service area: Turn on the FWP power, when the power cable is

connected properly, the FWP’s LCD window will light up and LOGO will be

displayed. The FWP will start to search for local CDMA digital network signals.

Once the network is found and the service is available, as shown in Fig. 1, you can

make a call.

Display in area with no service: When there is no service in your area, “No

Service!” will be displayed on the FWP. If the FWP still tries to search for local

CDMA digital network signal when there is no network, as shown in Fig. 2, in this

case please contact the local customer service.

Fig. 1 Fig. 2

17

heaixia

这个待机图片不适用于X60.


6 Getting to know your FWP

6.1 Main parts

① FWP phone

② Antenna

③ Handset

④ Microphone (for handfree calling)

⑤ LED lights

IN-USE: the light will keep on once the handset is picked up and turn off once

18


the handset is put back. H.F: the light will keep on after pressing the handfree key

for off-hook, and turn off after pressing the handfree key again for on-hook.

6.2 Keys

1) <SMS>

Press this key to enter into SMS menu

2) Soft keys(left : right: )

There are Left Soft key and Right Soft key. Pressing the Left Soft or Right Soft

key will execute the function of the left or right icon on the bottom of the LCD

window.

3) <VOL>

Press this key to adjust the volumes of receiver and speaker in idle or talk mode.

4) <MUTE>

19


Press this key to prevent the other person from hearing your voice but keep

connection during talk.

You can also press this key to mute the ring tone of the FWP when there is an

incoming call and at the same time you can receive the call as normal. The FWP

will quit mute state when the other person hangs up or you receive the call.

5) <PAUSE>

When you dial, press <PAUSE> key to enter timed-pause character “P”. One “P”

means a 3-second delay. Several Ps can be input. This function is mainly

intended for users to dial the extension number or make IP or international calls.

6) <FLASH>

When in conversation, you can press this key to set up a Three-Way Calling or

switch between Call-Waiting.

7) <END>

This is to reject an incoming call; return to main menu ; hang up the phone.

8) Direction keys ( , ,◄, ►)

They are used to move the cursor and the scroll bar and menu selection. Except

under some special interfaces, e.g., address selecting and revising, the functions

of ◄ and ►are the same as those of the Left and Right Soft keys

9) <RD/CALL>

Call or Redial or call back the phone numbers currently displayed in the FWP.

Dial out the hotline phone numbers when you have set the hotline function.

Look over the records of the outgoing calls.

20


10) <CLR>

Press this key to delete the character before the cursor or return to the upper

menu.

11)

Handfree key. Press this key to enter Handfree state.

12) 0－9 number and letter keys，*，#

To input numbers and characters. When allowed, “*” can be used to switch to

punctuation mark input mode. Under all the list interfaces, you can press * or #

to turn over or turn down the page.

Press<CLR>, you can return the upper menu., if “Back”is displayed on the right

below corner of the LCD window, then you can press the Right Soft key to return to

the upper menu. Press <END>, you can directly return to the main menu. In the

editing status, you can delete one character pressing <CLR> once and clear all by

pressing it and hold.

6.3 Display icons

The fist line of the LCD window displays the format of mobile network,

signal strength, network service, short message alert, ringing/mute, alarm, data

service and battery/external power supply. The second line displays greetings, the

third line displays date and time, the fourth shows the functions of left and right

soft keys and week.

21

heaixia

所有按键的具体用法是否要放进来？


Icon Description

Stands for CDMA digital format

Indicates the strength of current signal, the more bars, the stronger the signal is

Stands for network service is currently available. will appear when there is no network service

flickers to indicate there is new messages. If the Inbox is full, it will not flicker

Indicates sending fax, indicates receiving fax once only, indicates receiving fax all along, indicates asynchronous data sending, indicates asynchronous data receiving only once, indicates asynchronous data receiving all along

Indicates that you have set your Alarm function

Stands for mute; stands for ringing

Indicates the level of battery power, the more bars, the more power

The function of the right soft key in idle mode

The function of the left soft key in idle mode

Indicates current time, the numbers from left to right represent hour and minute in turn

Indicates the current date, the number from left to right represent year and month and day in turn

22


Icon Description

When you use your FWP only with the power adapter, the icon

of will replace the icon of on the LCD

When there is a new voice mail, will appear on the place of

Mon Indicates the current week

7 Calling function

7.1 Make a call

Function overview

If you have applied to the local telecom operator for relevant voice services,

you can use the FWP to make local, distance, international and IP calls.

Operation Guide

1) First make sure your FWP is powered on and enters the idle mode, as shown below

2) Using handset

Pick up the handset in idle mode;

A dialing tone is heard, dial the desired number;

Press <RD/CALL>key or wait for several seconds, the call will be made

automatically;

23

heaixia

这个待机图片是否可以用在X60系列上？


Hang up the handset to end the call.

3) Handfree talk

Press handfree key in idle mode;

A dialing tone is heard, dial the desired number;

Press <RD/CALL>key or wait for several seconds, the call will be made

automatically;

Press handfree key again to end the call.

4) Preset dial

Dial the desired number directly in idle mode;

Press <RD/CALL>key to make the call;

Press <END> key to end the call.

7.2 Receive a call

Function overview

When you receive an incoming call, your FWP will ring and the incoming

number will be displayed in the LCD window if you have applied to your local

telecom operator for incoming call display service.

Operation guide

1) Using handset

When there is an incoming call, pick up the handset;

Talk time displayed on the LCD;


2) Handfree receiving

24


When there is an incoming call, press the handfree key;

Talk time displayed on the LCD;


7.3 Redial

Function Overview

This function is for redialing the last called number.

Operation Guide

1) Using handset

Pick up the handset in idle mode, then a dialing tone is heard;

Press<RD/CALL> key twice continuously to dial out the last called number;


2) Handfree redial

Press handfree key in idle mode, the a dialing tone is heard;

Press <RD/CALL> key twice continuously to dial out the last called number;


If you activate Hot Line mode(not activate the call restriction), you can

only dial out the preset hot line calls (excluding emergency calls) by pressing the < RD/CALL> key.

7.4 Pause

Function overview

Add timed pause during dialing.

25

heaixia

4个图中是RD/CALL还是BACK/SEND,请确认.


Operation guide

1) Add timed pause during dialing

When you are dialing, Press <PAUSE> key to input timed pause character “P”

for delay in dialing. One “P” is 3-second delay.

2) If you dial a phone number with extension number, (e.g., the phone number is

123456, the extension number is 12) you input 123456PP12, your phone will

dial 123456 first, then after 6 seconds, it will dial 12. In this way, you can dial

the extension number directly.

7.5 Emergency Call

Function overview

In case of emergencies, only if the FWP can search out the local CDMA

digital network signal, can you dial out the emergency call numbers preset in the

FWP to seek for help.

Operation skill

1） When the Emergency call is over, your FWP will enter the Emergency state, and the

LCD will display:

EmergentCallOnly END to exit

2） You can press <END> key to exit Emergency state

3） During the Emergency state, you can only dial out the emergency call numbers, your

FWP will not respond to any other call numbers.

26


4） During the Emergency state, the volume of your key tone will be enhanced

Emergency calls are allowed even if Call Restrict is activated. Different countries

have different emergency call numbers, so the emergency call numbers preset in the

FWP won’t be effective in all countries. Please consult your local operator for details

when purchasing this product.

8 Optional Function

8.1 Three-way Calling

Function overview

This function allows a conservation involving three parties. Please contact

your local telecom operator to apply for this function and consult them for the

operations.

8.2 Call Forwarding

Function overview

This function enables you to forward your incoming calls to another

specified phone no matter your phone is turned off or not. You can still receive

calls while Call Forwarding is activated.

Please contact your local telecom operator to apply for this function and

consult them for the operations.

27


8.3 Call Waiting

Function overview

When there is a second incoming call when a call is in progress, you can

choose to receive or reject the second call. If you choose to receive it, you can

switch between the two calls.

Apply to your local telecom operator first to activate this function and

consult them for the operations.

8.4 Call Setting

Five submenus are available, including ①Hot Line②Call Restrict③

Originate Mode④Ring Tone⑤Auto Hyphen

8.4.1 Hot Line

Function overview

If you activate Hot Line mode, meanwhile not activate call restriction , you

can only dial out the preset hot line calls (excluding emergency calls) by pressing

the < RD/CALL> key.

Operation guide

1） In idle mode, press Left Soft key and then press digital key <2>, you will enter

the menu of Call Setting.

28


2） Press digital key <1> to select【Hot Line】menu,

You will enter the interface on the right:

① Setting

② Edit

3） Select Setting, two Hot Line modes will appear: On and Off. You can choose

to activate this function or not.

4） Press the Left Soft key to return to the upper menu.

5） Select Edit you will enter the editing interface of

hotline number on the right:

Hotline： OK Back

6） Press the Left Soft key to confirm the number and when you return to the idle

mode. The second line of the LCD window will appear :

－Hotline Mode－

8.4.2 Call Restrict

Function overview

Call Restrict includes five submenus: ① Origination ② Nation Wide ③

International④Incoming Call⑤Specified If Origination is activated, you cannot

make any calls (excluding emergency and hotline calls);If Nation Wide is

activated, you cannot make domestic distance calls;If International is activated,

you cannot make international distance calls;If Incoming Call is activated, you

cannot receive any calls;If Specified is activated, you cannot make specified calls.

29


Operation guide

1） In idle mode, press Left Soft key and then press digital key <2>, you will

enter the menu of Call Setting.

2） Press digital key <2> to select 【Call Restrict】, and then its submenus are

displayed.

3） Move the scroll bar to select the type of restriction you desires among the

submenus:

① Origination

② Nation Wide

③ International

④ Incoming Call

⑤ Specified

Press the Left Soft key to enter the activation interface of the restriction type

you selected.

4） Move the scroll bar to select On or Off option for the restriction type, and

then press the Left Soft key to confirm the option selection and return to the

upper menu. Specified Restriction:

Operation guide

1） In idle mode, press Left Soft key and then Press digital key <2>, you will

enter the menu of Call Setting.

2） Press digital key <2> to select 【Call Restrict】, and then its submenus are

30


displayed.

3） Press digital key <5> to choose【Specified】, you

will enter the interface on the right: ① Setting

② Edit

4） Select Setting, you can activate or deactivate this

type of restriction by selecting On or Off.

5） Press the Left Soft key to return to the upper menu.

6） Select Edit ,you will enter the editing interface of

Specified number on the right:

Specified： OK Back

7） Press the Left Soft key to confirm the input numbers and return to the upper

menu.

Emergency calls are still available after the setting of call restriction.

8.4.3 Originate Mode

Function overview

This function is intended to make it convenient for you to choose the way of

originating calls according to your own liking. Three options are available for

your choice.

Operation guide

1） In idle mode, press Left Soft key and then press digital key <2> to enter the

menu of Call Setting.

31


2） Press digital key <3> to select 【Originate Mode】 and enter its submenu,

three options are displayed:

①Sent Press (calls can be dialed out after pressing <RD/CALL>)

②After 3’S（the call will be automatically dialed out 3 seconds after the

number is input.）

③After 6’S（the call will be automatically dialed out 6 seconds after the

number is input.）

3） Select the desired originating mode and return to the upper menu.

8.4.4 Ring Tone

Function overview

15 types of ringings are available for your choice.

Operation guide

1） In idle mode, press Left Soft key and then press digital key <2> to enter

Call Setting.

2） press digital key <4> to enter the interface of Ring Type

3） Scroll to a ringing, and the system will play it.

4） Press the Left Soft key to select the desired ringing and return to the upper

menu.

8.4.5 Auto Hyphen

Function overview

By this function, you can set the input numbers with or without hyphen according to your own habit.

32


Operation guide

1） In idle mode, press the Left Soft key and then press digital key <2> to enter

Call Setting menu.

2） press digital key <5> to enter the setting menu of Auto Hyphen

3） Move the scroll bar to select between ON and OFF options.

9 Short Message

Function overview

The contents of short message are mainly texts and digits. Owing to its

convenience in use and cost effectiveness, SMS is popular with users, especially

when you cannot make or receive calls if the traffic channel for voice service is

busy. SMS can bring you much convenience. In addition, short messages can be

saved in the FWP for you to view them, which can replace the function of voice

recorder when the call is not answered.

Submenus for Short Message include ①Create New②View Inbox③View

Outbox④Voice Message ⑤SMS Setting

Operation guide

You can enter Short Message via the following two ways.

1） In idle mode, press the Soft Left key and then press digital key <4>.

2） Press <SMS> key

Information including new message, old message, voice message and current

saving capacity, etc are displayed. After several seconds, the display disappears

33


and is replaced by submenus.If there isn’t any message, your system will not

display above information.

9.1 Create New

Function overview

Under this menu you can write new message. 160 English characters are

allowed for one message.

Operation guide

1） In Short Message interface, press digital key <1> to

select Create New, you will enter the interface on

the right:

How are you! OK 160 Word

2） After inputting the message, press the Left Soft key

for confirmation. And then input the number of the

message receiver via the number keys, See the

right picture:

Or you can press the Right Soft key to enter “BOOK” to get the number directly

SMS DestAddr: 26260000 OK Book

3） Press the Left Soft key, and three options as shown below will appear:

①Send;②Save;③Send & Save.

You can press the corresponding number key or press ▲ or ▼ to move the scroll bar to make your selection.

34


9.2 Receive and Send Message.

9.2.1 View Inbox

Function overview

When a new message is received, the FWP will give an alert with four

continuous “di” sounds. At the same time, the reception of a new message is

displayed on the LCD window together with the information of the sender. The

icon for new message will flicker on the standby picture. You can enter View

Inbox which have the following three options: ①New Msg②Old Msg③Clear

Inbox

Operation guide- New Msg

1） Under the View Inbox interface, Press digital key <1> to view 【New Msg】.

2） The content viewing interface is as the right

picture: 3/15 9:57AM 87654321 Delete Next

3） You can press the Left Soft key to delete this message or

press the Right Soft key to view the next message.

4） The viewed message, if not deleted, will be saved into Old Msg of Inbox.

Operation guide-Old Msg

1） Under the View Inbox interface, Press digital key <2> to select to view 【Old

Msg】.

35


*26260000*12345678 *87654321 Menu 1/3 View

2） The list of old messages is shown as the right

picture:

3） You can scroll to the desired message by pressing ▲ and ▼.

4） At this time ,you can get the Call Back phone number by pressing <RD/CALL>

key, if pressing the key again, you will dial out the number. If the message

sender hasn’t set the Call Back number, the system will give you the alert :No

Call Back phone number received。

5） Under the above list interface, click the Left Soft key, three options will

appear:①Reply;②Forward;③Delete.

6） Under the above list interface, click the Right Soft

key to enter content viewing interface on the right:

*Urgent*．．．．．．．．3/15 9:59AM

12345678 Menu Back

7） Under the above content viewing interface, you can press <RD/CALL> key to

get the Call Back number. Press the key again, you can dial out the number. If

the Call Back number is not set, you can get the phone number of the

message sender. Press <RD/CALL> key again, you can make a call to that

number.

Call back#．．．．．．．．．12345678

Save Back

8） The interface of getting the Call Back number is

shown as the right picture:

9） You can press the Left Sofy key to save the number

into Phonebook. Here are two options:

36


① New entry (save as a new record)

② Existing (save to an existing record)

Operation guide-Clear Inbox

1） Under the View Inbox interface, Press digital key <3> to enter【Clear Inbox】,

which has three options:① Clear Old Msg ② Clear New Msg ③ Clear All

2） Click the corresponding number key or press ▲ or ▼ to scroll to the desired

option, you will perform the corresponding operation

When the messages reach to the maximum capacity, the still icon will

appear on the LCD window. Under the New Msg viewing interface, the function of

<RD/CALL> key is the same as that in【Old Msg】.

9.2.2 View Outbox

Function overview

The Outbox saves the edited messages. You can press digital key <3> under

the SMS interface to enter 【View Outbox】which has four options:①Sent Msg;

②Unsent Msg;③Temp Msg;④Clear Outbox.

Operation guide- Sent Msg

1） Under the interface of 【View Outbox】,press digital

key <1> to enter Sent Msg, the list of phone numbers

2626000087654321 12345678 Menu 1/3 View

37


to which you have sent messages is displayed as the right picture:

2） You can scroll to select the number for viewing. You can click the Right Soft

key to enter View or click the Left Soft key, three options can be seen:①

Send;②Edit;③Delete.

Operation guide-Unsent Msg

You can send the messages later by this function.

1） Save your editing message(refer to 9.1).

2） Later when needed ,press digital key <2> Under the interface of 【View Outbox】to enter the Unsent Msg .

3） The next steps are referred to the operations in Sent Msg.

Operation guide-Temp Msg

This function enables to you save the message under editing any time when

there is an incoming call. Later you can continue editing the message.

1） Press digital key <3>under the interface of 【View Outbox】to enter Temp

Msg.

2） The next steps are referred to the operations in Sent Msg.

Operation guide-Clear Outbox

1） Press digital key <4> under the interface of 【View Outbox】to enter Clear

Outbox which has four options:

①Clear Sent;②Clear Unsent;③Clear Temp;④Clear All.

38


2） You can click the corresponding number key or move the scroll bar by

pressing ▲ or ▼ to have the desired operation.

In all the listing interfaces, the names matching with those in Phonebook will be

listed.

9.2.3 Voice Message

Function overview

Voice Message is a service similar to Voice Recorder. You can forward the

incoming call to the Voice Message. You can get the voice messages through the

FWP saved in the server of the operator at any time and any place. When your

Voice Message receives a new message, your FWP will get an alert in time.

When there is a new voice message, the icon will flicker on the LCD

window, and at the same time, when you press <SMS> key to enter SMS menu,

“New VM：01” is displayed together with other information. After several

seconds, the display disappears and you can press digital key<4> to enter【Voice

Message】to see the notice of it.

Operation guide- Activate Voice Message

1） First you shall consult the local operator on how to activate the local Voice

Message and get the center code

2） Activate Call Forwarding in your FWP and set the destination number to be

the number of Voice Message. You shall consult the local operator on how to

39


activate the function of Call Forwarding.

3） The number of Voice Message is provided by the operator. Users can edit in

the editing interface of VM center code (refer to 9.2.4).

The function of Voice Message must be activated by the operator. If it is not

activated, voice messages cannot be received even if the number is set. Before using

this service, please confirm Call Forwarding and Message Receiving have been

enabled for your FWP

Please consult the local operator on how to leave/read a voice message and

consult them for the parameters of Voice Message (such as capacity, time for

recording, etc.)

9.2.4 SMS Setting

Function overview

Submenus for SMS Setting include ①Alert Type②Priority③Lifetime④

Delivery ACK⑤Center code ⑥Call Back#.

Press digital key<5>under SMS interface, you can enter 【SMS Setting】.

Operation guide

1） Alert Type

Two types of alert are available:

Bell: when a new message is received, the FWP will give an alert in 4

continuous “di” sounds. At the same time, the LCD window will lighten up to

display the information of the message sender.

40


Lamp: when a new message is received, the FWP will just lighten up to show

the information of the message sender.

You can move the scroll bar via the directional keys to select the alert type.

2） Priority

Three levels of priority are available: Normal Urgent Emergency

You can scroll to and select the desired level by moving the direction keys.

3） Lifetime

Lifetime indicates the time period that the system saves your message when

you fail to turn on the FWP in time when a new message is received.

The system has set 6 types of Lifetime: 1 Hour 2 Hours 12 Hours 1 Day 2 Days 3 Days

You can press the directional keys to scroll to the desired one and select it.

4） Delivery ACK

This is the acknowledgement made by the system for if the receiver has got

the message. You can activate or deactivate this function by choosing Yes or

No via the direction keys.

5） Center code

41


One of the necessary steps of using the service of Voice Message is to input

the code of the voice message center.

6） Call Back#

If you want the message receiver to reply to another number, you need to

input the number here.

10 Message Saving

10.1 Phonebook

Function overview

Submenus for Phonebooks include ①View book②Search book③Add entry

④Speed dial.

Operation guide

You can enter Phonebook by the following 2 ways:

1） In idle mode press the Left Soft key and then digital key<3>.

2） Press the Right Soft key.

10.1.1 View book

Function overview

In Phonebook, Press digital key<1> to enter View book.

When there is no list in your phonebook, the following submenus are

included in View book: All entry Ungrouped (New group).

Operation guide- All entry

42


1） If no number is input in the Phonebook, only“ （New entry）”is displayed.

2） You can have the following operations:

Press the Left Soft key, you can add new entry, for which the detailed operation is

referred to Add entry in 10.1.3.

Press the Right Soft key, and then you can have the following operations:

① Add entry：please refer to Add entry in 10.1.3 for details.

② Search book：please refer to Search book in 10.1.2 for details.

③ Delete entry

After the above operations, the new entry will automatically be classified

into Ungrouped.

Operation guide- Ungrouped

If you haven’t input any number, the operations are the same as above.

Operation guide- New group

If you haven’t set any new group, (New group) will appear on the third

line of the LCD window. And then you can choose to click the Left Soft key.

……………… < Music 01 >

Edit Save

1） You will enter the interface of adding new group,

see the right picture:

2） Click the Left Soft key again, you will enter the

interface of editing New group, see the right

picture:

_

OK 9 Word

43


< Music 01 >

Edit Save

3） Input the name of new group, and press the Left

Softkey to confirm the input and return to the

previous display. Move to the next line, see the

right picture:

4） You can press the Left Soft key or the ◄► key to select the music. Finally

please press the Right Soft key to save this operation.

Or you can choose to click the Right Soft key

1） The following options will appear: ① Add group;② Modify group;③

Delete group.

2） You can click the corresponding number key or move the scroll bar to have

the desired operation.

Operation guide- viewing the content of existing records

1） While viewing the content of existing record, see

the right picture:

2） You can press the Left Soft key to edit the record.

Or you can press the Right Soft key, the following three options will appear:

①Save tel to;②Delete entry; ③Back.

joe <Friends> 13525010000

Edit Menu

3） When you choose Save tel to ,two options will appear:①New entry;②

Existing.

4） You can click the corresponding number key or move the scroll bar to have

desired operation.

44


All the records within the group will be deleted if a group is deleted. Only the

self-established group can be deleted. “All entry” and “Ungrouped” belong to fixed

classification.

10.1.2 Search book

Function overview

You can search by name, number and group.

Operation guide

……………… < All entry >

Edit Start

In Phonebook press digital key <2> to enter Search book, see the right picture, You can operate as follows:

1） Search by name

Move the scroll bar to via ▲ and ▼, and click the Left Soft key to

activate the function of . Now you can input the name for inquiry.

Press the Left Soft key to confirm the input and return to the previous

interface. Now you need only to click the Right Soft key to activate the

function of to start searching the information of the name you

specified.

2） Search by number


activate the function of . Now you can input the number for inquiry.

Press the Left Soft key to confirm the input and return to the previous

45


interface. Now you need only to click the Right Soft key to activate the

function of to start searching the information of the number you

specified.

3） Search by group


activate the function of or click ◄ and ► to select different group.

Press the Left Soft key to confirm the selected group, and then click the Right

Soft key to activate the function of to start searching the

information of the group.

Rules for searching:

1） If the name domain is empty but the number domain is not, then all the records

containing the specified characters in the number domain will be searched in the

specified group.

2） If the number domain is empty but the name domain is not, then all the records

containing the specified characters in the name domain will be searched in the

specified group.

3） If neither the name domain or the number domain is empty, then all the records

containing the specified characters in both the name and the number domain will

be searched in the specified group.

4） If both the name domain and the number domain are empty, then all the records

of the specified group will be listed.

46


10.1.3 Add entry

Function overview

You can add new contacts via the submenu Add entry of Phonebook.

Operation guide

1） In idle mode, press the Right Soft key to enter Phonebook.

2） Press digital key <3> to select Add entry.

3） And Edit entry appears. Move the scroll bar by pressing ▲or▼ to select one

from different icon shown below which stands for different items:

：Name ：Mobile phone

：Group ：Office phone

：Family phone ：Fax

4） After selecting the item by moving the scroll bar, you can press the Left Soft

key to enter the editing interface of the selected item.

5） After editing, press the Left Soft key to confirm it and return to Edit entry

6） Press the Right Soft key to save the setting.

Operation skill

1） When it comes to the icon , You can press the Left Soft key or the ◄► key

to select existing groups.

2） If you input the number in idle mode, you can press the Left Soft key to save

the number directly. There are two options: save to New entry and save to

47


Existing

10.1.4 Speed Dial

Function overview

This function enables you to manage, add, edit, view and delete speed dial

numbers. You can make calls or send messages in the viewing interface or from

the list of speed dial numbers. The FWP supports speed dial by inputting the

address into the interface in idle mode.

Operation guide-Add new record

（New entry） Add 0 Back

1） In Phonebook, press digital key <4> to enter

Speed Dial, see the right picture:

EDIT< 001 >

Menu Back

2） Click the Left Soft key to add new speed dial

record, see the right picture:

3） Address editing

Click ▲or▼ to move the scroll bar to address editing 【EDIT<001>】, and then

you can click ◄ or ► to select one from the addresses ranging from 001 to

020

4） Number editing

Click ▲or▼ to move the scroll bar to the icon , Click the Left Soft key,

three options will appear:①Edit;②Phone Book;③Save.

Click digital key <1> to enter the editing interface of the specified address

48


Click digital key <2> to enter Phone Book and select the number of the

specified address.

After editing ,return back and click digital key <3> to save the setting.

Operation guide- viewing existing record

001 81512345 002 26260000 Menu 2/2 Back

1） When you enter Speed Dial again, the interface is

as the right picture:

2） The list of numbers for speed dial is displayed, e.g., 【002 26260000】, here the

first three numbers 002 is the address for the phone number 2626000. If the phone

number is too long, you can press digital key <0> so that the address won’t

displayed but only the phone number is displayed.

3） Then you can click the Right Soft key to return to the upper menu or click the

Left Soft key to have the following operation:①New entry;②View Mode;③

Delete. You can add new entry of speed dial or delete the current entry.

4） The interface of View Mode is as the right picture:

You can view the speed dial records under different addresses via pressing ◄

or ►. You can press the Right Soft key to return to the upper menu or press

the Left Soft key to enter the next submenu which has three options:① Edit

Mode② New entry ③ Delete.

< 001 > 26260000

Menu Back

49


Function overview- having speed dial in idle mode

In idle mode, two ways of speed dial are available.,

Operation guide

1) In idle mode, input the correct address and press <RD/CALL>, if the address is

recorded, the system shall start dialing; if not recorded, There will be an alert

of No Record!!!

2) In idle mode, input the correct address and hold the last key of the input for a

few seconds. If the address is recorded, the system shall start dialing; if not

recorded, There will be an alert of No Record!!!

Under the number list interface and the view interface of speed dialing, you can

send messages by pressing <SMS> key or call by pressing <RD/CALL>key to the

number of the record directly.

10.2 Call History

Function overview

Submenus for Call History includes ①Incoming Call②Outgoing Call③

Missed Call④Call Time.

In idle mode, just press the Left Soft key and then digital key<1>, you can

enter the menu of Call History.

50


10.2.1 Incoming Call

Operation guide

1) Press digital key<1> in Call History or press ▲ in idle mode to view the

incoming calls.

2) The list of incoming calls will be displayed, among which you can select the

desired number.

3) Press the Left Soft key to enter the view interface, the information related to

the incoming calls will be displayed.

10.2.2 Outgoing Call

Operation guide

1) In Call History, press digital key<2>to enter the submenus of Outgoing Call

2) The list of outgoing calls will be displayed, you can select the desired number

for view.

3) Press the Left Soft key to enter the view interface, the information related to

the dialed number will be displayed.

When in idle mode , you can press <RD/CALL> key to look over the outgoing call

records; press again, you will dial out the selected number.

51


10.2.3 Missed Call

Operation guide

1) In Call History, press digital key<3> to view Missed Call, or you can view

Missed Call directly by pressing ▼ in idle mode.

2) The missed calls will be displayed, and you can move the scroll bar to the

desired number.

3) Press the Left Soft key to enter the interface of View, and the information

relative to the missed call will be displayed.

After entering the viewing interface of Incoming Call, Outgoing Call or Missed

Call, you can click the Left Soft key to directly save the number into Phonebook.

After entering the viewing interface or the list of Incoming Call, Outgoing Call or

Missed Call, you can press <RD/CALL> key to call the number directly or press

<SMS> to send messages to the number .

10.2.4 Call Time

Function overview

Submenus for Call Time includes ①Last Call②Incoming Call③ Outgoing Call④All Calls.

Operation guide

1) In Call History, press digital key <4> to enter the submenu of Call Time

52


2) Scroll to the submenu to be viewed or press the corresponding number key to

select the submenu.

3) The total talk time and the number of calls for the selected submenu will be

displayed

the call time here may vary from your actual call time , so you can refer to it but

not depend on it.

11.Setting

Function overview

Submenus for Setting includes①Greeting②Phone Number③Alarm④

Backlight⑤Volume⑥Font.

In idle mode, you can press the Left Soft key and then digital key <6> to

enter Setting menu.

11.1 Greeting

Function overview

This function enables you set the greetings displayed on the second line of LCD window in idle mode.

Operation guide

1) In Setting, press digital key <1> to enter the editing interface of

Greeting ,The greeting words shall be no longer than 16 ASCII characters.

53


2) After editing, press the Left Soft key for confirmation. The new greetings will

be displayed after the FWP returns to the idle mode.

11.2 Phone Number

Function overview

You can set the number of your FWP for your convenience in operation.

Operation guide

1) In Setting, press digital key <2> to enter editing interface of your phone

number.

2) After editing, press the Left Soft key for confirmation.

11.3 Alarm

Function overview

At most you can set four alarms

Operation guide

1) In Setting, press digital key <3> to enter Alarm’s setting menu.

2) Scroll to the alarm to be set.

3) Press the Left Soft key to confirm your choice. And then 3 lines of texts

shown below are displayed on the LCD window:

2005-02-23 11：43

Method < Once >

Bell < Sound 1 >

54


4) The line that the scroll bar is on is the alarm time you are editing. You can

press ◄ or ► to move the cursor to the number you want to revise, at this

time the number will flicker, and you can input the desired alarm time by

pressing the number keys.

5) Scroll to the next line by pressing ▼, and then you can press ◄ or ► to select

an alarming method from three options: <Never>, <Once> and <Daily>

6) Press▼ again to scroll to the third line, and then you can press ◄ or ► to

select an alarming bell from nine groups of sound

7) To confirm the setting, press the Left Soft key; to cancel the setting, press the

Right Soft key.

8) When one or more alarms are effectively set, the icon will appear on the

LCD window when the FWP returns to idle mode.

9) When it comes to the alarming time, there will be time display on the screen

together with the preset ringing. You can press the Right Soft key to exit the

alarm, or the alarm ringing will last 3 minutes before returning to idle mode.

The date and time of the FWP is obtained from the local CDMA digital network.

If the system time cannot be obtained from the network, the preset alarm will become

ineffective.

55


11.4 Backlight

Function overview

This function enables you to choose the time interval from the last time when

you trigger on the backlight on the LCD window to the time when the backlight

turns off. The time interval may affect standby time and talk time supported by the

battery.

Operation guide

1) In Setting Menu, press digital key <4> to enter Backlight’s setting menu.

2) three options including 5 Seconds、10 Seconds、Never are displayed. You can

click the direction keys to move the scroll bar and select your desired time

length.

3) After setting, press the Left Soft key for confirmation

11.5 Volume

Function overview

The volumes of income call ringing, keytone and other system sounds (e.g.

volume of alarm or new message alert) can be adjusted. The volume is divided

into five scales ranging from Silent、Low、Middle、High、Super.

Operation guide

Please refer to the following steps for adjusting volume:

56


1) Under the menu of Setting, press digital key <5> to enter the setting menu

of Volume.

2) three options are available:

① Ringer

② Key Tone

③ Alert Tone

Select the desired option and enter it for adjustment. Each option has five

scales of volumes

3) Press or to select the appropriate volume, and then press the Left

Soft key for confirmation.

Function overview

You can press <VOL> key to adjust the volumes of the receiver and the

microphone. There are four levels of volume including Low、Middle、High、Super.

Operation guide

1） When press <VOL> again after pressing the handfree key, you can adjust the

volume of dialing tone and the volume of microhphone during handfree talk.

2） After picking up the handset or during talk, you can press <VOL> to adjust the

volume of the receiver.

11.6 Font

Function overview

Four types of font are available for display: Italic, Old, Normal and Bold

57


Operation guide

Please refer to the following steps:

1) In Setting, press digital key <6> to enter Font Setting

2) Press or to select your desirable font.

3) Press the Left Soft key for confirmation and return to the upper menu.

12 Data service

Please refer to Data Service User Instruction in USB installation disk.

13 Input method

Number

Keys

English

Letter

Digital

keys

English Letter

1 6 M m o

2

3

4

A b c

D e f

G h i

7

8

9

P q r s

T u v

W x y z

5 J k l 0 Space

*# - , @’ ( ) _ ! ? * # % ” : + < > = etc

Function Overview

Four input methods are available, including English word input, upper case

English letter input, lower case English letter input and digital input. 26 English

letters are laid out on 2-9 number keys. The English word input method adopts the

intelligent input method of ZI Company, making input faster and more convenient.

58


Under upper or lower case English letter input mode, the English letters can be

input by clicking the 26-English-letter keys once or more times. The details are

referred to the following operation guide.

13.1 English Input

13.1.1 English Letter Input

Operation guide

1) Press Right soft key to select uppercase letter (ABC) or lowercase letter ( abc)

input in editing state.

2) Click a key to input the first letter on the key.

3) Double click the key to input the second letter on the key.

4) Click the key three times to input the third letter on the key.

5) E.g.: to input “c”，you must click 2 three times.

6) During keying, wait a few seconds until the cursor moves right, then click the

key for the second or third time.

7) Or quickly click the key for the second or third time, and then the second or

third letter is input.

13.1.2 English word input

Operation guide

1) In editing state, press Right Soft key to switch to Word input.

2) Input the first few letters in turn until the desired English word appears.

59


3) Take “ tomorrow” as an example， press 8, 6, 6 and 6 in turn.

4) And then press to select “ tomorrow” into the editing area.

13.2 Number Input

Operation guide

1) Press Right Soft key to move to number input method in editing state.

2) Press the desired number key in turn.

3) In editing, * and # stand for themselves.

Press <CLR> key, one character before the cursor will be deleted. Press <CLR> key

and hold, all the characters will be cleared.

13.3 Punctuation mark input

Operation guide

1) Press * in non-digital editing state, the first screen of punctuation marks

appear.

2) Press to get the punctuation marks one by one.

3) Press ▲ to input the selected punctuation mark into the editing area.

Note：

1） Press to get the the other punctuation marks.

2） Press number keys to input the corresponding punctuation marks

During editing, the 4th line in the LCD window will display the number of

characters currently editable.

60


14 Power supply

Function overview

1） The power supply of the FWP has two types: power adapter (DC 6V) and

backup battery.

2） Rechargeable battery has several statuses including low power, no power,

under charging and full.

3） Battery charging has two types: charging during power-on and charging

during power-off. When the charging starts, the FWP will give a “du” alert.

After the charging is completed, disconnect the power supply and disconnect

the FWT from the charger.

4） To ensure your correct use of the power supply of the FWT, please read

carefully the contents in “ Installing Battery”, “installing power adapter” and

“ Battery & Power Adapter” in “ Safety Precautions”.

61


15 FAQ

Problems Solutions

No display on LCD after the FWP is powered on

Check the status of power switch, quality and connection of adapter and battery, otherwise change power adapter or battery.

No display on LCD after the FWP is powered on when its power is supplied by battery.

Check if the battery is correctly installed, if the battery socket and plug are well connected, if the battery’s connection is broken or has welding problem, otherwise change the broken battery.

Can’t make long distance calls

Check if the long distance setting of the FWP is enabled, if enabled, please cancel this function according to the User Manual

No indication of signal strength

Change the antenna’s position; change the FWP’s place when the network signal is weak; set the power switch to “OFF” and then reset it to “ON” to check if the FWP starts normally. If it can’t start normally, please contact your seller.

No dialing tone after the handset is picked up

Hang up and pick up the handset again; check the connection between the phone and the handset.

Can’t have internet access.

First check to see if USB data line is in good connection, then operate according to the instructions in the disk. Power off the FWP and power it on. If internet access still fails, please contact your seller.

Other abnormalities First read the User Manual, check the connection of power supply and antenna, if no abnormality is found, power off the FWP and power it on again.

If the problems cannot be solved after the above handling, you may contact

62


customer service, or send emails to [email protected]. We will reply to you as

fast as possible and provide you with good after-sales services.

16 Specifications

Model WP560 WP960 Frequency Tx:

450~458MHz Rx:

460~468MHz

Tx: 1850~1910MHz

Rx: 1930~990MHz

Max. Transmitting

Power

CDMA Class III (200mW)

Air Interface IS-95A/B, IS-2000 Vocodec 13K QCELP & 8K EVRC

Max. Data Rate 153.6Kbps Bandwidth of Channel

1.25MHz

Operating Temperature

-10 ℃ ～ +55℃

Range of Humidity

≤95% RH

AC/DC Power Adapter

AC input: 100~240V (47~63Hz) DC output: 6V/1.5A

Backup Battery Rechargeable Ni-MH battery: 3.6V/1800mAH,

Max. talk time: ≥2 hr. Max. standby time: ≥48 hr.

Size (L * W *H) 200mm×174mm×59mm

Weight About 650g

(including battery but excluding AC/DC power adapter)

63

mailto:[email protected]


17 Legal Statement

Users must follow User Manual in strict accordance during operations. If

things undescribed in User Manual occur, don’t handle them by yourself but

contact us or the local agent immediately. ZTE shall not be held responsible for

the loss due to user’s misoperations. The product’s specifications are subject to

change without notice.

64

版权声明

Copyright © 2005 by ZTE Corporation

本用户手册之版权属于中兴通讯股份有限公司所有，并依法受《中华人

民共和国著作权法》及有关法律的保护。

未经中兴通讯股份有限公司许可，任何人不得摘录、复制、发行、汇编

或者以各种方式（电子版、印刷品等）向公众传播本手册的任何内容。对于

有损版权人利益的行为，公司将依法追究侵权人的责任。

本公司保留在不预先通知的情况下，对此手册中描述的产品进行修改和

改进的权利；同时保留随时修订或收回本手册的权利。

本用户手册中如有文字不明之处，请您及时向本公司或者代理商、销售

商咨询。

2005 年 3 月第 1版

目录

1 功能简介..................................................1

2 安全使用需知..............................................4

2.1 操作注意事项..........................................4

2.2 使用环境注意事项......................................4

2.3 电池和适配器使用注意事项..............................4

3 包装清单..................................................5

4 用户手册图标提示说明......................................6

5.无线固话安装说明 .........................................7

5.1 安装无线固话.........................................11

5.2 工作状态检测.........................................15

6.无线固话外观简介 ........................................16

6.1 主要外观部件.........................................16

6.2 按键介绍.............................................17

6.3 显示图标.............................................19

7 通话功能 ................................................20

7.1 拨打电话.............................................20

7.2 接听电话.............................................21

7.3 重拨.................................................22

7.4 拨号延时.............................................22

7.5 紧急呼叫.............................................23

8.可选功能 ................................................24

8.1 三方通话.............................................24

8.2 呼叫转移.............................................24

8.3 呼叫等待.............................................24

8.4 呼叫设置.............................................24

8.4.1 热线模式.........................................25

8.4.2 呼叫限制.........................................25

8.4.3 起呼模式.........................................27

8.4.4 来电铃音.........................................28

8.4.5 连字符设置.......................................28

9.短信 ....................................................29

9.1 编辑新短信...........................................29

9.2 收发短信.............................................30

9.2.1 查看收件箱.......................................30

9.2.2 查看发件箱.......................................33

9.2.3 语音信箱 ........................................34

9.2.4 短信设置（SMS Setting） .........................35

10.信息存储 ...............................................37

10.1 电话本..............................................37

10.1.1 查看(View book).................................38

10.1.2 查找(Search book)...............................40

10.1.3 新增(Add entry).................................42

10.1.4 快速拨号(Speed dial)............................43

10.2 呼叫历史............................................45

10.2.1 已接来电........................................45

10.2.2 拨出电话........................................45

10.2.3 未接来电........................................46

10.2.4 通话时间........................................46

11.个人设置 ...............................................47

11.1 问候语..............................................47

11.2 本机号码............................................48

11.3 闹钟................................................48

11.4 背景灯..............................................49

11.5 音量................................................50

11.6 字体................................................51

12.数据业务 ...............................................51

13.输入法 .................................................52

13.1 英文输入............................................52

13.1.1 英文字母输入....................................52

13.1.2 英文单词输入....................................53

13.2 数字输入............................................53

13.3 标点符号输入 .......................................53

14.电源 ...................................................54

15.常见故障解决 ...........................................55

16.规格说明 ...............................................56

17.法律声明 ...............................................57

ZTE WP560/960用户手册

1 功能简介

感谢您选择中兴通讯股份有限公司的 WP560/960 系列 CDMA 无线固定

电话。为保证您的WP560/960 系列无线固定电话工作在最佳状态，请在使用

前仔细阅读本用户手册，并妥善保存用户手册以备将来使用。

1


WP560/960系列 CDMA无线固话具有以下功能：语音业务功能描述拨打电话只要您向当地的电信运营商开通了相关的语音业务，您就可以

利用本产品拨打本地电话、国内长途、国际长途及 IP 电话等。

接听电话

您可接听呼入电话。如果您向当地的电信运营商开通了来电显

示业务，并且所使用的固定电话机支持来电显示功能，那么响

铃时，固定电话上将会显示来电的号码。

紧急呼叫只要固定电话能搜索到本地的 CDMA 数字网络，您可拨打在电话中已设置的本地紧急电话号码以寻求紧急援助。

免提通话 /预拨号

您无需摘机即可拨打和接听电话。

重拨功能重拨最后一次呼出的号码。

呼叫延时在拨号中插入拨号延时。

呼叫转移本功能是将来电转移到您指定的另一部话机上，不管您的话机

关机与否。

呼叫等待

当您正在通话时，如果又有一个新来电呼入，那么您可以选择

接听或拒听新来电。如果您选择接听新来电，那么您可以在两

个来电之间来回切换。

三方通话本功能允许三方同时互相通话。本功能需要向当地的电信运营

商申请。

呼叫限制通过设置，可以限制用户拨打或接听电话(包括国际或国内长途)。

免打扰从系统侧直接拒绝来电。

热线模式通过设置，直接按<RD/CALL>键可以且仅可以呼出预先设置的

热线号码。

2


数据业务

功能描述上网服务您可以享受 CDMA20001X高速的无线文件传输、

收发电子邮件、网页浏览等 INTERNET网络服务，同时支持休眠功能。

PC传真您可以用 PC机来收发传真。异步数据通过该业务，您可以实现低速率(9.6/14.4Kbps)的文件传

输、INTERNET接入等服务。

高级功能

功能描述

短信

收发短信、查看新短信、删除短信、编辑新短信等

功能；收件箱可存储 50条，发件箱可存储 10条(机卡一体)。

语音邮件支持基于短信通知的语音邮件。电话本可存储 100个地址(机卡一体)，支持 20组速拨(机

卡一体)，支持群组分类。通话记录 50条来电记录、20条去电记录，时间记录。

来电铃音来电铃音 15组可选。

闹钟 4组闹钟，9组铃声可选。

其他音量可调、4种字体可选、ZI英文输入法。

3


2 安全使用需知

2.1 操作注意事项

1) 本产品可能会影响心脏起搏器、听力助听器或其他电子医疗设备，请在

使用本产品时遵循设备提供商或您的医生的建议。

2) 请不要自行拆卸本产品外壳。

3) 当您清洁本产品时，请使用干燥、柔软的抹布，请使用不含酒精、笨及

丙酮的清洁剂。

4) 请避免本产品跌落或受到其他强烈冲击。

5) 安装天线时请确保您的固定台已经断电；请不要试图拔出天线。

6) 请只使用原配的天线，请勿将天线用于其他用途。

2.2使用环境注意事项

1) 本产品只能安装在室内。

2) 本机的工作温度是-10 摄氏度到 55 摄氏度，请勿在此温度范围外使用。

当环境温度过高或过低时，可能会引起故障。

3) 请不要将本机置于多尘的环境下，远离火炉或煤气炉。

4) 请不要将本机置于潮湿的环境下，避免机器进水或受潮，否则可能腐蚀

电路板并造成资料丢失。

5) 请不要将本机靠近磁场、静电等环境。

2.3电池和适配器使用注意事项

1）请仅使用原配的 AC/DC适配电源。请勿将该电源适配器用于其他用途。

2） AC/DC适配电源应在规定的交流电压范围内使用。

3）电量不足时，本产品会发出指示，为了确保您通讯正常，请尽快充电或

4


使用后备电池，并保证后备电池的电池电量充足。

4）当电池电量不足，无线固话无法正常工作时，应把话机电源开关拨到 OFF

状态，直到使用电源适配器供电。

5）当您的无线固话不使用电源适配器，而只用电池供电时，请及时给电池

充电，以免电池过放电。

6）当您长期不需要使用本产品时，请及时将备用电池取出。

7）当电源线已损坏时，请不要再使用电源适配器。

8）请用环保的方式处理废弃的电池。

3.包装清单

当您拆开全新的本产品的包装时，请确保产品各部件齐全，如果您发现

产品部件不全或破损，请与我们的客户服务部联系。

本产品共有 8个主要部件：

5


序号名称数量备注

1 无线固话主机 1 包括一根天线

2 手柄 1

3 电源适配器 1

4 镍氢可充电电池 1

5 印刷品 3 包括 1本用户手册、一张保

修卡及一张合格证

6 USB 数据电缆 1 可选部件

7 软件光盘 1 可选部件

8 螺钉 1 用于固定电池盖，含包装袋

为维护您的权利，请您在购机时仔细填写“保修卡”以便获得保修权利，如果您

没有填写“保修卡”或私自拆机，您将享受不到保修权利。

4.用户手册图标提示说明

功能简介

操作指导

操作技巧

注意事项或警告

6


5.无线固话安装说明

5.1 天线安装

您的无线固话可以选择安装室内天线或者室外天线，本章将为您详细介

绍天线的安装。

安装天线前，请确认您的无线固话已关机，拔掉电源适配器以及电池。天线安装

后，请不要拔出天线。不要频繁扭转天线或者 360 度旋转天线，这样将对无线接入终

端的信号接收能力、使用寿命产生不良影响。

5.1.1 室内天线的安装

操作指导

当您的无线固话离基站较近，信号较强时，您只需要安装室内天线就可

以得到良好的通话质量。请您按照下图位置将室内天线插入无线固话天线接

口中，注意拧紧接头。

5.1.2 室外天线的安装室外天线的信号接受能力强于室内天线。当您的无线固话离基站较远，

7


信号较弱时，您可以选择使用室外天线以获得更好的语音效果。如果您已配

置了室外天线，我们将不再提供室内天线。

我们为您提供了两种室外天线，室外全向天线与室外定向天线。室外全

向天线安装简易，在安装过程中，您不需要考虑朝向、位置等因素。室外定

向天线拥有更好的信号接受能力，但是它的安装比室外全向天线复杂，下面

为您详细介绍室外天线的安装。

操作指导

1) 室外全向天线

室外全向天线需要垂直安装在室外。请您按照室外全向天线包装盒中的

安装说明进行操作，用非金属物固定。

2) 室外定向天线

室外定向天线的选址：

室外定向天线需要在室外较高的地方垂直地面安装，例如：房顶，建筑

物顶部，小山顶或者其他一些相对较高的地方。一般来说，天线安装位

置越高，接受信号能力就越强。如果在室外定向天线与基站之间有高的

建筑或者小山等比天线高的障碍物挡在天线前边，那么希望您将天线安

装在离障碍物至少 50米远的地方。如果可能，可以直接将天线安装在该

障碍物上。同时，为防止干扰，请将室外定向天线安装在尽可能远离电

视天线的地方。

室外定向天线的安装：

室外定向天线的安装，请您参照室外定向天线包装盒中的安装说明进行

操作，用非金属杆固定。

8


室外定向天线的朝向：

如果一个定向天线已经安装，那么决定它信号接受能力强弱的一个重要

因素是它的朝向。如果您所在的地方为平地，请将您所安装的天线面向

基站方向安装。如果您的住宅附近山或者建筑物较多，请旋转定向天线

的朝向，直到无线固话达到最好的信号接受能力。如下图：

5.1.3 室外天线与无线固话的连接

操作指导

固定好室外天线后，请将馈线与室外天线连接，并固定于支撑物后垂下。

再将馈线经过避雷器后与无线固话连接、旋紧，确保连接可靠。同时，请不

要将重物悬挂在天线电缆上，用力拉扯，扭曲。我们提供的馈线长 15 米，请

不要用照明电线加长，如果长度不够，请与我们联系。

5.1.4 避雷措施

由于室外天线一般安装在室外较高的地方，您还需要考虑到避雷。我们

将为您提供详细的避雷建议，请您按照建议选配避雷针与避雷器。任何不正

当操作（没有按照建议安装避雷设施）产生的意外事故，本公司不负责任。

如果您安装了室外天线，请您在雷雨天气暂时不要打电话。

9


操作指导

1）避雷针

请您在室外天线附近竖起避雷针，避雷针应比室外天线高，接地良好，

并且接地阻抗小于 10 欧姆。同时，避雷针顶端与室外天线最外边点的连线与

垂直线夹角应不大于 45 度，避雷针与室外天线的水平间距不低于 3米。如下

图：

2）避雷器

请您在无线固话天线接口

另一端通过 15 米馈线接室外天

按照避雷建议选择接地线，并

处连接 2 米馈线，然后安装避雷器，避雷器的

线。在避雷器中间有安装接地线的位置，请您

确保将该线接地。

10


5.2安装无线固话

底视图

① 电池盖

后视图

④ 电源插口 (DC 6V)

⑤ 电源开关

⑥ 数据 USB/串口接口

开机：将电源开关(见图)拨到 ON 档，这时话机发出“嘀～”的一声提示

音，进入待机画面；关机：将电源开关(见图)拨到 OFF 档。

11


电源适配器安装

无线固话工作电源可来自电源适配器输出的直流电源，电源适配器连接

在外部交流电源上。

请先将电源适配器插入无线固话电源插孔，再将电源适配器与外部交流电源连

接。

UIM 卡安装

当您使用的是机卡分离的 WP560/960 时，需要在使用前安装 UIM 卡。当您安装 UIM

卡时，首先请确保无线固话的电源开关处于 “Off” 状态，同时拔掉外部电源。

请在安装电池前安装 UIM 卡。

1.拆下电池盖 2. 安装 UIM 卡（注意

UIM 卡缺口位置）

12


3.将 UIM 卡按照方向

推进卡座后示意图

电池安装

无线固话配备了一块可充电的内置备用电池，当没有电源适配器时，无

线固话可以依靠电池供电工作。当采用电源适配器给无线固话供电时，电源

适配器同时也在给电池充电。

当您安装电池时，首先请确保无线固话的电源开关处于 “Off” 状态，同时拔掉

外部电源。在您第一次使用前，请给镍氢电池连续充电 16 小时。

1.拆下电池盖 2.安装电池（注意电池极性）

13


3.电池安装后示意 4.装上电池盖

话机手柄安装

连接无线固话和电脑

无线固话挂墙安装

14


在挂墙安装时，请根据图1所示拔出手柄防滑扣，然后再根据图2所示反向将防

滑扣插回，以避免在挂墙使用状态下手柄滑脱。

图 1 图 2

5.3 工作状态检测

服务区显示：打开电源，如果电源连接正确，无线固话 LCD 显示屏

将点亮，显示 LOGO 信息，然后无线固话开始搜索本地的 CDMA 数字网络

信号，当搜索到有网络且有服务时，如图 1所示，此时您就可以拨打或接听

电话了。

无服务区显示 : 当您处于无服务区域时，固定台将提示“No

Service!”；如果无网络时，还将试图搜索本地的 CDMA数字网络信号，如图

2所示，此时请与当地客户服务联系。

图 1 图 2

15


6.无线固话外观简介

6.1主要外观部件

①主机；②天线；

③手柄；④免提麦克风；⑤LED 灯

手柄状态指示灯(IN-USE)：提手柄摘机后长亮，放手柄挂机后长灭；免

提状态指示灯(H.F)：按免提键摘机后长亮，按免提键挂机后长灭。

16


6.2按键介绍

1) <SMS> 按此键进入短信菜单。

2) 左右软键(左软键：右软键： ) 有左右两个软键，按左右软键分别等同于显示屏左下角和右下角显示的

功能软键。

3) <VOL> 按此键可在待机或通话过程中调节听筒、喇叭音量。

4) <MUTE> 在通话过程中使对方暂时听不到自己的声音，但保持通话连接。

在对方来电，振铃响起的过程按下可暂时使铃声静音，同时可以正常接

听电话，对方挂机或接听电话后恢复铃声正常设定；

5) <PAUSE>

17


在输入的电话号码中插入暂停“P”标识，每个“P”相当于 3S 延迟，

可多次重复输入多个“P”，主要用于用户一次拨通分机号码或用于 IP

电话或国际长途。

6) <FLASH> 闪断键，通话过程中可按此键进行三方通话或切换呼叫等待。

7) <END> 对方来电时，按此键拒接电话；菜单操作中直接退回到主菜单；挂机。

8) , , ►,◄（方向键）用于移动当前的光标位置、改变当前的菜单选项、垂直滚动条。除某些

界面下（如地址的选择和修改界面等），左右方向键的功能等同于左右

软键的功能。

9) <RD/CALL> 开始呼叫当前显示的电话号码、回拨、重拨、热线呼叫、查看呼出电话

记录。

10) <CLR> 删除当前光标处的字符；返回上一级菜单。

11) 免提键：待机状态下，按此键进入免提状态。

12) 0－9 ，*，# 数字/字母键数字、字符的输入；其中*键在允许时可以切换至标点符号的输入模式。

在各记录列表界面，您可以按*键向上翻页，按#键向下翻页。

按键盘上 CLR 键可返回上一级菜单，如果在显示屏右下角的提示软键为 Back,则

按右软键可返回上一级菜单。按 END 键直接返回主菜单，如果是在菜单的编辑屏中，

按一次 CLR 键可删除一个字符，长按可全部删除。

18


6.3显示图标

LCD显示屏上第一行显示的图标分别用来指示当前移动网络的制式、信

号强度、网络服务、短信提示、铃音/静音、闹钟、数据业务和电池/外接电源，

第二行显示问候语，第三行显示日期时间，第四行显示左右功能键和星期。

图标描述

表示 CDMA数字制式

指示当前接受信号强度；竖条越多，表明信号越强

指示当前网络有服务；网络无服务时显示

闪烁表示有未读短消息；不闪烁表示存储区满

指示 FAX 发送；表示 fax 接收一次；表示 fax

一直接收；表示异步数据发送；表示异步数据接收一

次；表示异步数据一直接收

指示您已经设置了闹钟功能.

静音提示；铃音提示为

指示当前电池容量，竖条越多，表明电池容量越大

待机状态下的功能右键(右软键)

待机状态下的功能左键(左软键)

当前时间指示，从左到右依次为小时和分钟

当前日期指示，从左到右依次为年、月、日

19


图标描述

当您只通过电源适配器使用无线固话时，图标将会取代

图标出现在 LCD右上角

当您有新的语音信息时，此图标会出现在图标出现的地

方

Mon 当前星期显示

7 通话功能

7.1拨打电话

功能简介

只要您向当地的电信运营商开通了相关的语音业务，您就可以利用本产

品拨打本地电话、国内长途、国际长途及 IP 电话等。

操作指导

1) 首先确保您的无线固话开机并进入待机状态,如下图所示：

2) 手柄通话

待机状态提起手柄；

听拨号音，拨打所需号码；

按<RD/CALL>键或等待数秒自动呼出；

通话结束后手柄挂机。

3) 免提通话

20


待机状态按免提键；

听拨号音拨打所需号码；

按<RD/CALL>键或等待数秒自动呼出；

通话结束后再次按免提键挂机。

4) 预拨号

待机状态直接拨打所需号码；

按<RD/CALL>键开始呼叫；

通话结束后，按<END>键挂机。

7.2接听电话

功能简介

您可以接听呼入电话。如果您向当地的电信运营商开通了来电显示业务，

并且所使用的固定电话机支持来电显示功能，那么响铃时，固定电话上将会

显示来电的号码。

操作指导

1) 手柄接听

来电时提起手柄，LCD屏显示通话时长；

通话结束后，手柄挂机。

2) 免提接听

来电时按免提键，LCD屏显示通话时长；

通话结束后，再次按免提键挂机。

21


7.3重拨

功能简介

重拨最后一次呼出的号码。

操作指导

1) 手柄重拨

待机状态提起手柄，听拨号音；

连续按<RD/CALL>键两次，您将重拨最后一次呼出号码；

通话结束后，手柄挂机。

2) 免提重拨

待机状态按免提键，听拨号音；

连续按<RD/CALL>键两次，您将重拨最后一次呼出号码；

通话结束后，再次按免提键挂机。

如果您启用了热线模式（同时没有开启呼叫限制功能），您拨打任何号码按

<RD/CALL>键呼出的都是你所设置的热线号码（不包括紧急号码）。

7.4拨号延时

功能简介

在拨号中插入拨号延时。

操作指导

1) 拨号时插入拨号延时等待

当您拨号时，按 <PAUSE> 键输入拨号延时字符 (P)，一个拨号延时字

22


符相当于 3秒钟延时。

2) 如果您要拨打一个分机 ,例如主机号码 123456, 分机号码是 12，您输入

123456PP12，无线固话将先拨出 123456，等待 6秒钟后再拨出 12。这样

您就可以一次性直接拨通分机号码 12。

7.5紧急呼叫

功能简介

当您处于紧急情况下时，只要固定电话能搜索到本地的 CDMA数字网络

信号，您就可以拨打已设置在固定电话中的紧急呼叫号码，寻求紧急援助。

操作技巧

1) 紧急呼叫结束通话后，进入紧急呼叫状态，此时屏幕显示

EmergentCallOnly END to exit

2) 您可以按<END>键退出紧急呼叫状态。

3) 在紧急呼叫状态只能拨打紧急号码，对其他号码不响应。

4) 处于紧急呼叫状态时按键音量增大

即使设置了呼叫限制，也允许紧急号码的呼出。不同的国家有不同的紧急呼叫号

码，所以固定台的紧急呼叫号码不会在所有地区生效。详细情况请在购买本机时咨询

本地运营商。

23


8.可选功能

8.1三方通话

功能简介

本功能允许三方同时互相通话。如果您需要使用此项功能，请首先向当

地的电信运营商咨询并申请。

8.2呼叫转移

功能简介

呼叫前转功能是将来电转移到您指定的另一部话机上，不管您的话机关

机与否。呼叫前转激活时，您仍然可以接听电话。

如果您需要使用此项功能，请首先向当地的电信运营商咨询并申请。

8.3呼叫等待

功能简介

当您正在通话时，如果又有一个新来电呼入，那么您可以选择接听或拒

听新来电。如果您选择接听新来电，那么您可以在两个来电之间来回切换。

如果您需要使用此项功能，请首先向当地的电信运营商咨询并申请。

8.4呼叫设置

呼叫设置包括：①热线模式(Hot Line)②呼叫限制(Call Restrict)③起呼模

式(Originate Mode)④来电铃音(Ring Tone)⑤连字符设置(Auto Hyphen)等子

菜单。

24


8.4.1热线模式

功能简介

如果您启用了热线模式，同时没有启动呼叫限制，那么您拨打任何号码

按<RD/CALL>键呼出的都是你所设置的热线号码（不包括紧急号码）。

操作指导

1）待机状态按左软键后，按数字键<2>，进入呼叫设置菜单。

2）按数字键<1>键选择菜单【Hot Line】(热线模式)，有两个选项：

①Setting（设置）；②Edit（编辑）。

3）选择 Setting（设置）选项，您可以激活（On）或者关闭(Off)热线模式。

Hotline： OK Back

4）按左软键确认后返回上级菜单，选择 Edit（编辑）

选项，您将进入热线号码编辑界面，如右图所示：

5）按左软键确认热线号码后返回到待机状态，LCD屏第二行显示：

－Hotline Mode－

8.4.2呼叫限制

功能简介

呼叫限制功能包括：①所有去电限制②国内长途限制③国际长途限制④

来电限制⑤特殊号码限制等子菜单。若所有去电限制设定，该无线固话将不

25


能拨打任何电话(不包括紧急号码与热线)；若国内长途限制设定，该无线固

话将不能拨打国内长途电话；若国际长途限制设定，该无线固话将不能拨打

国际长途电话；若来电限制设定，该无线固话将不能进行所有电话的接听；

若特殊号码限制设定，该无限固话将不能拨打所设置的电话号码。

操作指导


2）按数字键<2>选择菜单【Call Restrict】(呼叫限制)，此时，您将进入呼叫限

制类别选择界面。

3）移动反选条选择您需要限制的呼叫类型，有 5个选项：

①Origination（所有去电限制）

②Nation Wide（国内长途限制）

③International（国际长途限制）

④Incoming Call（来电限制）

⑤Specified（特殊号码限制）

按左软键确认后进入您指定的呼叫限制激活界面

4）移动光标条选择开启（On）或关闭（Off），按左软键确认并返回上级菜

单。特殊号码限制设定：

操作指导


2）按数字键<2>选择菜单【Call Restrict】(呼叫限制)，此时，您将进入呼叫限

26


制类别选择界面。

3）按数字键<5>选择菜单【Specified】(特殊号码设置)，有两个选项：① Setting

（设置）② Edit（编辑）

4）选择 Setting（设置），您可以激活（On）或者关闭(Off) 特殊号码设置。

5）按左软键确认后返回上级菜单。

Specified： OK Back

6）选择 Edit（编辑）选项，您将进入特殊号码编辑

界面，如右图所示：

7）按左软键，确认您输入的特殊号码后返回。

呼叫限制设置后，紧急呼叫仍然可行.

8.4.3起呼模式

功能简介

起呼模式功能是为了方便用户选择自己习惯的打电话的方式。有三种模

式。

操作指导


2）按数字键<3>，进入【Originate Mode】(起呼模式)选择界面；有 3个选项：

①Sent Press（按<RD/CALL>键方可拨出）

②After 3’S（输完号码 3秒后自动拨出）

③After 6’S（输完号码 6秒后自动拨出）

27


3）选择您需要的起呼模式后返回上级菜单。

8.4.4来电铃音

功能简介

您可以选择自己喜欢的来电铃音；共有 15首铃音供您选择。

操作指导


2）按数字键<4>，进入铃音选择界面。

3）移动反选条，系统会播放反选条选中的铃声。

4）按左软键选择您需要的铃音种类，并返回上级菜单。

8.4.5连字符设置

功能简介

用户可以设置输入号码时是否有连字符，以符合自己的使用习惯。

操作指导


2）按数字键<5>，进入连字符设置界面。

3）移动反选条选择开启（On）或关闭（Off）。

28


9.短信

功能简介

短信业务内容以文本、数字为主。短信业务以其使用简单方便，经济实

惠，深受用户欢迎。尤其当话音服务信道繁忙，无法打进（出）电话时，短

信业务的优势将给您带来诸多方便；同时短信可以保存在无线固话中直到您

查看，可取代无人接听电话时的电话录音功能。

本机的短信业务包括：①Creat New（编辑新短信）②View Inbox（查看

收件箱）③View Outbox（查看发件箱）④Voice Message（语音信息）⑤SMS

Setting（短信设置）等菜单。

操作指导

您可以通过以下两种途径进入短信设置菜单：

1）待机状态按左软键后，按数字键<4>

2）按面板上的<SMS>键

系统在进入的过程中，会提示您新短信，旧短信，新语音信息以及当前

存储容量等信息。显示数秒后，系统回到短信设置界面，有 5个选项供您选

择。如果没有任何短信息，系统不会显示上述信息。

9.1编辑新短信

功能简介

在此菜单下，您可以进行新的短信编辑，您可以输入 160个英文字符。

29


操作指导

1）在短信界面下，按数字键<1>进入编辑新短信

界面,如右图：

How are you! OK 160 Word

2）输入短信内容后，点击左软键确认，您将进入

收件人号码输入界面，如右图：

您可以通过数字键直接输入（也可以按右软键，直接从电话本提取号码）

SMS DestAddr: 26260000OK Book

3）按左软键，出现发送画面，有三个选项：

① Send（发送）

② Save（保存）

③ Send&Save（发送并保存）

您可以点击相应的数字键选择；也可以点击上下方向键移动反选条选择。

9.2收发短信

9.2.1查看收件箱

功能简介

当您收到新短信的时候，无线固话发出新短信提示音，四声连续的“嘀”

音。同时，LCD显示已经接收到新短信并显示发送人信息。在待机画面上方

30


会出现闪烁的新短信提示图标。此时您可以进入收件箱查看新短信，有三

个选项：①New Msg（新短信）②Old Msg（旧短信）③Clear Inbox（清空收件

箱）

操作指导－新短信

1）在查看收件箱界面，按数字键<1>选择查看【New Msg】（新短信）。

3/15 9:57AM 81515105 Delete Next

2）新短信文本浏览界面如右图所示：

3）按下左软件您将删除该短信，按右软键浏览下一条短信。

4）您阅览过的短信如果没有删除将直接进入旧短信收件箱。

操作指导－旧短信

1）在查看收件箱界面，按数字键<2>选择查看【Old Msg】（旧短信）。

*26260000*81515105 *81512345 Menu 1/3 View

2）旧短信列表界面如右图所示：

3）您可以通过上下键移动反选条选择您想查阅的短信。

4）此时，您可以通过<RD/CALL>键提取对方的回复（Call Back）号码，再次

按<RD/CALL>键您将呼叫该号码；如果对方没有设置回复（Call Back）号

码，系统会提示您：No Call Back phone number received。

5）在旧短信列表界面下您可以点击左软键，出现三个选项：① Reply（回复）

31


② Forward（转发）③ Delete（删除）

您可以点击相应的数字键选择；也可以点击上下方向键移动反选条选择。

*Urgent*．．．．．．．．3/15 9:59AM

81512105 Menu Back

6）在旧短信列表界面下点击右软键，进入短信内容

浏览界面,如右图：

7）在短信内容浏览界面下，您可以通过<RD/CALL>

键提取对方的回复（Call Back）号码，再次按<RD/CALL>键您将呼叫该号

码；如果对方没有设置回复（Call Back）号码，您将提取对方发送信息的

本机号码，再次按<RD/CALL>键您将呼叫该号码； Call back#．．．．．．．．．

81512105

Save Back

8）提取回呼号码界面如右图：

9）此时您按左软键可以将该号码存入电话本中，有两个选项：

①New entry（保存至新记录）

②Existing（拷贝至已有记录下）

操作指导－清空收件箱

1）在查看收件箱界面，按数字键<3>选择【Clear Inbox】（清空收件箱）。有三

个选项：①清空旧短信；②清空新短信；③清空所有短信。

2）您可以点击相应的数字键选择；也可以点击上下方向键移动反选条选择

相应的选项，您将会清空对应的收件箱。

当短信容量达到最大后， LCD屏会显示静止的图标。在新短信浏览界面下，

32


<RD/CALL>键的功能与【Old Msg】（旧短信）中描述的功能一致。

9.2.2查看发件箱

功能简介

发件箱为您保存了已编辑的短信。您可以在短信界面按数字键<3>进入发

件箱查看短信，有 4个选项：① Sent Msg（已发短信）② Unsent Msg（未发短

信）③ Temp Msg（临时短信）④ Clear Outbox（清空发件箱）

操作指导－已发短信

2626000081515105 81512345 Menu 1/3 View

1）在查看发件箱界面按数字键<1>，LCD屏显示您

已发短信的号码列表，如右图：

2）您可以点击上下方向键移动反选条，选择您需要

查阅的号码。此时您可以点击右软键，进入短信内容浏览界面或点击左

软键，有三个选项：① Send（发送）② Edit（编辑）③ Delete（删除）

3）您可以点击相应的数字键选择；也可以点击上下方向键移动反选条选择。

操作指导－未发短信

您可以通过该功能，晚一点将短信发出。

1）将正在编辑的短信保存(参照 9.1节)；

2）需要提取时在查看发件箱界面按数字键<2>进入进行进一步操作；

3）后续相关操作请您参考 Sent Msg（已发短信）的查阅操作。

33


操作指导－临时短信

当您正在输入短信的时候有来电时，这个功能将把您编辑的短信随时保

存，您可以继续编辑未编辑完的短信。

1）在发件箱界面按数字键<3>进入；

2）后续相关操作请您参考 Sent Msg（已发短信）的查阅操作。

操作指导－清空发件箱

1）在发件箱界面按数字键<4>选择进入清空发件箱后，有四个选项：①Clear

Sent（清空发送过的短信）②Clear Unsent（未发送的短信）③Clear Temp（清

空临时短信）④Clear All（清空所有短信）；

2）您可以点击相应的数字键选择；也可以点击上下方向键移动反选条选择

相应的选项，您将会清空对应的发件箱。

在所有的列表界面，如果有与电话本匹配的姓名，则显示姓名列表。

9.2.3 语音信箱

功能简介

语音信箱是类似于录音电话的一项服务。您可以将来电转移到语音信箱

中。您可通过无线固话随时随地提取运营商服务器中存储的"语音"信息，当

您的语音信箱内有新留言时，您的无线固话会及时收到短消息通知。

当有新语音信息时，LCD屏显示闪烁的图标，同时，在您按<SMS>键

进入短信菜单时，系统提示：New VM： 01，显示消失后，您可以按数字键

34


<4>进入语音信箱查看语音信息通知。开通语音信息功能

操作指导

1）首先应咨询当地运营商，如何开通本地的语音信箱功能，并获取语音信

息中心号码信息。

2）在手机上设置呼叫转移，并将呼叫转移的号码设为语音信箱号码。呼叫

转移的设置方法请参见“呼叫转移”的介绍。

3）语音信箱号码由局方提供后,您可在语音信息中心代码（Center code）（参

考9.2.4节）编辑界面进行编辑.

语音信箱的功能需要由局方开通,如果没开通,即时设了号码也收不到语音信息。

在使用语音信箱业务之前请确认您的手机已开通“呼叫转移”和“短消息接收”两

项功能。

请向当地运营商咨询如何留言、如何读取留言以及他们提供的语音信箱的具体参

数（容量、录音时间等）。

9.2.4 短信设置（SMS Setting）

功能简介

短信设置包括：①Alert Type（新短信提示音）②Priority（优先级别）③Lifetime

(短信保存时间)④Delivery ACK（回送报告）⑤Center code（语音信息中心代码）

⑥Call Back#（回复号码）等子菜单。

您可以在短信界面下按数字键<5>进入【SMS Setting】（短信设置）进行设

35


置。

操作指导

1） Alert Type（新短信提示音）

当您进入此界面后，系统为您提供了两种新短信提示音：

Bell（铃音提示）：当您接收到新短信时，无线固话发出四声连续的“嘀”

音；同时，显示屏被点亮，显示发送人信息。

Lamp（点亮显示屏）：当您接收到新短信时，无线固话只点亮显示屏，显

示发送人信息。

您可以通过方向键移动反选条选择您所需要的方式。

2） Priority（优先级别）

当您进入此界面后，系统为您提供了三类级别：

Normal（一般）

Urgent（紧急）

Emergency（特别紧急）

您可以通过方向键移动反选条选择您所需要的方式。

3） Lifetime (短信保存时间)

短信保存时间是指当您有新短信时没有及时开机，系统为您保存新短信

的时间期限。

当您进入此界面后，系统为您提供了六种时间选择：

1 Hour（1小时）

2 Hours（2小时）

36


12 Hours（12小时）

1 Day（1天）

2 Days（2天）

3 Days（3天）

您可以通过方向键移动反选条选择您需要设置的时长。

4） Delivery ACK（回送报告）

回送报告是系统对于对方是否已经收到短信的回执。当您进入此界面后，

您可以通过方向键移动反选条选择开启（Yes）或关闭（No）此项功能。

5） Center code（语音信息中心代码）

在这里输入语音信息中心代码是您使用语音信息功能的必要步骤之一。

6） Call Back#（回复号码）

当您需要对方将信息回复到其它号码时，您只需在此界面下输入回复号

码。

10.信息存储

10.1电话本

功能简介

该菜单项包括：①View book (查看电话本)②Search book (查找电话本)③Add

entry (新增)④Speed dial (快速拨号)等子菜单。

操作指导

您可以通过以下两种途径进入电话本：

37


1）待机状态按左软键后，按数字键<3>

2）按面板上的右软键

10.1.1查看(View book)

功能简介

在电话本界面下按数字键<1>查看。

该菜单项包括：

All entry：总记录

Ungrouped：未分组

(New group)：新增群组

操作指导－总记录

1）如果您尚未输入任何号码，显示屏底部提示您有 0个记录，同时显示“

（New entry）”即新增记录；

2）此时您可以进行以下操作：

点击左软键，您可以开始新增记录，具体操作方法请您参照 10.1.3 新增

(Add entry)。

点击右软键，您可以进行下列操作：

① Add entry（新增记录）：具体操作请您参照 10.1.3新增(Add entry)。

② Search book（查看电话本）：具体操作请您参照 10.1.2查找(Search book)

③ Delete entry（删除记录）

通过上述操作新增的记录将自动归入“未分组（Ungrouped）组别中。

38


操作指导－未分组

如果您尚未输入任何号码，操作方法同上。

操作指导－新群组

如果您尚未新建任何群组，LCD 屏第三行将显示： (New group)。此时

您可以选择按左软键：

……………… < Music 01 >

Edit Save

1）点击左软键，进入新增群组界面，如右图所示：

_

OK 9 Word

2）点击左软键，您将进入新增群组名称编辑界面，

如右图：

3）录入群组名后，请按左软键确认并退回新增群组

界面，移动反选条到下行，如右图：

< Music 01 >

Edit Save

4）您可以按左软键或者按左右方向键◄►进行铃音选择，有 15首铃音可选。

完成后请您按右软键保存此次操作。

或者您可以选择按右软键：

1）出现三个选项：① 新增群组（Add group）② 修改群组（Modify group） ③

删除群组（Delete group）

2）您只需要点击相应的数字键或者利用方向键移动反选条，即可进行您需

要的操作。

39


操作指导－浏览已有记录 joe

<Friends> 13525010000

Edit Menu

1) 已有记录的浏览界面如右图所示：

2) 您可以按左软键对当前记录进行编辑或按右软键，出现三个选项：①Save

tel to（号码保存至）②Delete entry（删除记录）③Back（返回）

3) 当您进入①Save tel to后，有两个选项：①New entry（保存至新记录）②

Existing（拷贝至已有记录下）

4) 您只需要点击相应的数字键或者利用方向键移动反选条，即可进行您需

要的操作。

删除组同时删除组内所有记录。删除只能删除自建分类。All entry，未分组

（Ungrouped）属于固定分类。

10.1.2查找(Search book)

功能简介

您可以按姓名、号码、组合方式查找。

操作指导

在电话本界面下按数字键<2>进入查找界面,如右

图：

您可以进行下列操作：

……………… < All entry >

Edit Start

1）按姓名查找

40


通过上下方向键移动反选条到图标处；点击左软键，启动图标

的功能，即可输入您所查询的姓名；完成输入后，按左软键确认，返回

上次显示界面，此时，您只需点击右软键，启动图标的功能，开

始搜索您指定的姓名的所有信息。

2）按号码查找


的功能，即可输入您所查询的号码；完成输入后，按左软键确认，返回

上次显示界面，此时，您只需点击右软键，启动图标的功能，开

始搜索您指定的号码的所有信息。

3）按组合查找


的功能（或者点击左右方向键），即可循环选择不同的组别；确认您准备

查询的组别后，点击右软键，启动图标的功能，开始搜索。

查找规则：

1）如果姓名域为空，号码域不为空，则在指定组别中查找所有号码域包含指定字符

串的所有记录。

2）如果号码域为空，姓名域不为空，则在指定组别中查找姓名域包含指定字符串的

所有记录。

3）如果姓名域与号码域都不为空，则在指定组别中查找号码域与姓名域分别包含指

定字符串的所有记录。

4）如果姓名域与号码域均为空，则列出指定组别的所有记录。

41


10.1.3新增(Add entry)

功能简介

您可以通过电话本菜单下的【Add entry】(新增记录)子菜单，增加联系

人记录。

操作指导

1）待机状态，按右软键进入电话本功能

2）按数字键<3>选择【Add entry】(新增记录)子菜单

3）系统进入 Edit entry（记录编辑）界面；按上下方向键移动反选条选择不

同的图标，它们代表记录的不同分项：

：姓名：移动电话

：群组：办公电话

：家庭电话：传真

4）当反选条选中相应选项时，您可以通过左软键进入对应分项的编辑界面。

5）编辑完成后，按左软键确认，系统返回 Edit entry（记录编辑）界面。

6）按右软键保存此次操作。

操作技巧

1）您只能从已存在的分组中选择图标处的名称，不能在这里新增群组。 2）待机画面输入电话号码后，按左软键您可以将此号码直接保存。您可以

选择作为新记录保存（New entry）或选择保存在已有记录下(Existing)。

42


10.1.4快速拨号(Speed dial)

功能简介

快速拨号包括对速拨号码的管理、添加、编辑、查看、删除速拨记录等

功能；可在速拨列表和查看界面打电话、发短信；支持待机界面输入地址快

速拨号。

操作指导

（New entry） Add 0 Back

1) 您可以在电话本菜单下按数字键<4>进入快速

拨号界面,如右图：

此时您可以进行下列操作：

EDIT< 001 >

Menu Back

2) 点击左软键，新增速拨记录，如右图所示：

3) 地址编辑

点击上下方向键，移动反选条到地址编辑【EDIT<001>】,您可以点击左右

方向键循环选择地址，地址范围是 001～020。

4) 号码编辑

点击上下方向键，移动反选条到图标处，点击左软键，出现三个选项：

① Edit（编辑）② Phone Book (电话本) ③ Save (保存)

点击数字键<1>,进入指定地址下的号码编辑界面；

点击数字键<2>,进入电话本，选择指定地址下的号码；

在您完成此次的编辑后，返回并点击数字键<3>,您可以保存此次设定。

43


操作指导－浏览已有速拨记录

001 81512345 002 26260000 Menu 2/2 Back

1）当您再次进入速拨界面时，如右图：

2） LCD 屏显示您已设定的速拨记录列表，如：【002 26260000】其中，前三

位数字 002是号码 26260000的地址。如果号码很长，您可以通过按数字

键<0>键，使反选条所在行不显示地址，只显示记录号码。

3）此时，您可以点击右软键返回上级菜单或点击左软键，出现三个选项：

①New entry（新增记录）② View Mode (查阅模式) ③ Delete (删除)

在此，您可以新增速拨记录或者删除当前记录；

4） View Mode (查阅模式)界面如图：

您可以通过左右方向键选择查阅不同地址下的速拨记录。您可以按右软

键选择返回上级菜单或点击左软键，进入下级子菜单，有三个选项：①

Edit Mode（编辑模式）② New entry（新增记录） ③ Delete（删除）。

< 001 > 26260000

Menu Back

功能简介－待机状态下的快速拨号

待机画面下，提供两种方式的快速拨号

操作指导

1）在待机界面，输入正确的地址，按<RD/CALL>键。如果该地址有记录，

则系统开始拨号；

44


如果无记录，系统提示：No Record！！！

2）在待机界面，输入正确的地址,并长按输入地址的最后 1个键数秒。如果

该地址有记录，则系统开始拨号；

如果无记录，系统提示：No Record！！！

在速拨列表界面和查看界面，您可直接按<SMS>给本记录的号码发送短消息，可

直接按<RD/CALL>给本记录的号码打电话

10.2呼叫历史

功能简介

呼叫历史包括①已接来电（Incoming Call）②拨出电话（Outgoing Call）③

未接来电（Missed Call）④呼叫时间（Call Time）等子菜单。

您可以在待机状态下，点击左软键后，按数字键<1>，进入呼叫历史菜单。

10.2.1已接来电

操作指导

1）在呼叫历史菜单下，点击数字键<1>；；或在待机状态下，按上方向键▲直接

查看已接来电记录。

2）显示屏显示已接来电的号码清单，选择您需要查看的号码

3）按左软键，进入查阅界面，LCD屏将显示已接电话的通话信息。

10.2.2拨出电话

操作指导

45


1）在呼叫历史菜单下，点击数字键<2>

2）显示屏显示拨出电话的号码清单，选择您需要查看的号码

3）按左软键，进入查阅界面，LCD屏将显示已拨电话的相关信息。

在待机画面下，按<RD/CALL>键，您就可以直接查看拨出电话记录，再次按

<RD/CALL>键，您将呼叫该号码。

10.2.3未接来电

操作指导

1）在呼叫历史菜单下，点击数字键<3>进入未接来电记录；您也可以在待机

界面下，按下方向键▼直接查看未接来电记录。

2）显示屏显示未接来电记录，选择您需要查看的号码

3）按左软键，进入查阅界面，LCD屏将显示未接来电的相关信息。

在您进入已接来电、未接来电、拨出电话的信息浏览界面后，可以点击左软键直

接将对应号码保存在电话本中。

在您进入已接来电、未接来电、拨出电话的信息列表界面和信息浏览界面后，按

<RD/CALL>键可以直接呼叫该号码，按<SMS>键可以向显示号码发送短信,按<CLR>

键删除该记录.

10.2.4通话时间

功能简介

通话时间菜单包括①最近一次通话(Last Call)②来电通话时间(Incoming

46


Call)③拔出电话时间(Outgoing Call)④总通话时间(All Calls)等子菜单。

操作指导

1）在呼叫历史菜单下，点击数字键<4>，进入下级菜单

2）点击对应的数字键或者移动反选条选择您需要查阅的选项

3）显示屏显示同类电话的总通话时间以及个数。

此通话时间仅供您参考，不可作为计费凭证。

11.个人设置

功能简介

个人设置包括①问候语(Greeting)②本机号码(Phone Number)③闹钟(Alarm)

④背景灯(Backlight)⑤音量(Volume)⑥字体(Font)等子菜单。

您可以在待机状态下，点击左软键后，按数字键<6>，进入个人设置菜单。

11.1问候语

功能简介

您可以设置待机状态下 LCD 屏显示在第二行的问候语

操作指导

请您参阅以下步骤：

1）在个人设置菜单下，点击数字键<1>,进入问候语编辑屏,问候语最长为 16

个 ASCII字符。

2）编辑完毕按左软键确定，返回待机状态后屏幕显示最新修改后的问候语。

47


11.2本机号码

功能简介

您可以设置本机号码，以便于您的操作。

操作指导


1）在个人设置菜单下，点击数字键<2>,进入本机号码(Phone Number) 编辑

屏。

2）编辑完毕按左软键确定。

11.3闹钟

功能简介

您最多可同时设置 4组独立的闹钟。

操作指导


1）在个人设置菜单下，点击数字键<3>,进入闹钟(Alarm)设置菜单

2）移动反选条选择四个组别中的任一进行设置

3）按左软键确认，此时 LCD屏显示 3行正文，如下： 2005-02-23 11：43

Method < Once >

Bell < Sound 1 >

4）反选条选中的这行，是您目前正在编辑的闹钟时间，当光标移动到某个

48


数字时，此处的数字会处于闪烁状态，此时您可以点击数字键设置您需

要的闹钟时间

5）点击上下方向键移动反选条到下行，您可以通过左右方向键选择响铃方

式，有三种：关闭<Never>、到时后仅响铃一次<Once>、每日到时后响一

次<Daily>。

6）点击上下方向键移动反选条到下行，您可以通过左右方向键选择闹钟铃

声；有 9首闹钟铃音供您选择。

7）确认请按左软键；取消设置请按右软键

8）当设置成功一组或一组以上的有效闹钟时，返回待机画面后显示屏出现

图标。

9）当闹钟到时后，将在屏幕上提示到时时间，并有您已设置的铃音提示，

您可以按右软键退出或者持续响铃三分钟后退出返回待机状态。

本固定电话的日期和时间从本地的 CDMA 数字网络获取，当无法获取本地 CDMA 数

字网络的系统时间时，事先设置的闹钟可能会失效。

11.4背景灯

功能简介

您可以选择从最后一次有效触发点亮显示屏背景灯(如按键)到关闭背景

灯的时间间隔。该间隔的选择可能会影响待机时间和通话时间等充电电池的

指标。

49


操作指导


1）在个人设置菜单下，点击数字键<4>,进入背景灯(Backlight)设置菜单

2） LCD屏显示三个选项：5 Seconds、10 Seconds、Never（从不关闭背光）；您

可以点击上下方向键移动反选条选择您需要设置的间隔长度。

3）设置完毕，点击左软键确认。

11.5音量

功能简介

您可以调节来电振铃、按键音以及其他系统声音(如闹铃、新短信提示音)

的音量。音量共分 5级，从小到大依次为：Silent、Low、Middle、High、Super。

操作指导


1）在个人设置菜单下，点击数字键<5>,进入音量(Volume)设置菜单；

2）有三个选项：①Ringer（铃音）②Key Tone（按键音）③Alert Tone（信息提

示音）；

3）选择您需要调节的声音种类进入，每类都有 5个音量等级；

4）按上下方向键，选择您认为合适的音量，按左软键确定。

功能简介

您也可以调节听筒与免提音量，分为四个级别：Low、Middle、High、Super。

50


操作指导

1）您可以直接点击面板上的<VOL>按钮进入，调节听筒与免提音量；

2）当按下免提键，再按<VOL>键时可以调节拨号音的大小，以及用免提通

话的音量。

3）当摘机,按<VOL>键,可以调节听筒的音量,也可以在通话过程中进行调

节.

11.6字体

功能简介

您可以选择显示的字体样式；有 4种字体可选：Italic（斜体）、Old、Normal、

Bold（粗体）。

操作指导


1）在个人设置菜单下，点击数字键<6>,进入字体(Font)设置菜单。

2）按上下方向键，选择您需要或喜欢的字体。

3）按左软键确定并返回上级菜单。

12.数据业务

请参见 USB 安装光盘中的《数据业务用户指南》。

51


13.输入法

功能简介

该输入法分为英文单词输入模式、大写英文字母输入模式、小写英文字

母输入模式和数字输入模式四种。26个英文字母分布 2-9数字键。其中的英

文单词输入是采用 ZI 公司的智能联想输入法，这使得输入英文变得更加快

捷和方便。在大小写英文字母的输入模式下，可以根据 26 个英文字母的键盘

输入，通过单次和多次击键，即可完成英文字母的输入。具体的细节输入、

击键要点见以下操作指导。

13.1英文输入

13.1.1英文字母输入

操作指导

1）编辑状态下，按右软键至 ABC/abc输入法。

2）单击某键，输入该键上第—个字母。

3）双击某键，输入该键上第二个字母。

52


4）三击某键，输入该键上第三个字母。

5）例：输入英文字母“c”，三击数字键 2。

6）按键中，等待几秒后光标向右移动，再击键二下、三下。

7）或快速按击该键二下、三下，输入该键上第二、第三个英文字母。

13.1.2英文单词输入

操作指导

1）在编辑状态下，按右软键切换到 word输入法。

2）依次按下前几个字母直至出现所需单词。

3）例：“tomorrow”，依次按下数字键 8、6、6、6。

4）按向上方向键▲，将单词“tomorrow”选入编辑区。

13.2数字输入

操作指导

1）编辑状态下，按右软键至数字输入法。

2）依次按所需数字键。

3）编辑中，*、# 键为*、#符号键。

按<CLR>键，删除光标前 1个字符。长按<CLR>键，删除所有字符。

13.3 标点符号输入

操作指导

1) 在非数字输入的编辑状态下，按*键，弹出第一屏标点符号。

53


2) 按方向键，可依次选择后面的标点符号。

3) 按向上方向键▲，将选择的标点符号选入编辑区。

在您编辑的过程中，LCD 屏第四行会显示您目前可编辑的字符数。

14.电源

功能简介

1）固定电话的电源分为外接电源适配器(DC 6V)和备用充电电池两种。

2）充电电池分为低电、欠电、正在充电、充满等几种状态；

3）充电电池的充电分为开机下充电和关机下充电。开始充电时，无线固定

台会发出“嘟～”的一声提示音；充电结束后，断开电源并断开无线固

定台与充电器的连接。

4）为确保您正确使用固定电话的电源，请在使用前详细阅读前面“电池安

装”、“电源适配器安装”及“电池和适配器使用注意事项”等部分的内

容。

54


15.常见故障解决

故障处理方法

无线固话开机后 LCD

显示屏没有显示

请检查电源开关状态、适配器或充电电池的质量、

接线、及连接可靠度，否则应更换电源适配器或

充电电池。

使用电池供电时开机

LCD 没有显示

检查是否安装好电池，电池插座与其插头接触是

否良好，电池连接线与其连接线是否有断裂脱焊

故障，否则应更换已损坏的电池。

不能拨打长途电话检查无线固话是否设置国内长途设置功能，如果

设置，请按照用户手册描述取消该功能。

没有信号强度指示改变天线位置；网络信号弱时，应移动无线固话

的位置；将电源开关置 OFF 后，再重新置 ON，检

查无线固话是否正常启动。如不能正常启动，请

联系您的销售商。

摘机后无拨号音将手柄挂机后再摘机；检查手柄曲线和无线固话

的连接情况。

不能接入 Internet 首先检查 USB 数据电缆是否正确连接，然后按照

光盘中指南操作。将无线固话关电重启，如果仍

然无法接入 Internet，请和您的销售商联系。

出现其他异常情况。请先查看用户使用手册，检查电源及天线等部件

连接，如果没有异常，关机再重新开机。

如果以上方法均不能解决您的疑难问题，请与我们的客户服务部联系。或者，您

可以直接发送电子邮件到以下地址： [email protected]我们将尽快回复您，

并给予您优质的售后服务。

55


16 规格说明

型号 WP560 WP960

频率 Tx: 450~458MHz

Rx: 460~468MHz

Tx: 1850~1910MHz

Rx: 1930~990MHz

最大发射功率 CDMA Class III (200mW) 空中接口 IS-95A/B, IS-2000

语音编码 13K QCELP & 8K EVRC

最大数据数率 153.6Kbps

带宽 1.25MHz

工作温度范围 -10 ℃ ～ +55℃

湿度范围 ≤95% RH

AC/DC电源适配器交流输入: 100~240V (47~63Hz) 直流输出:6V/1.5A

后备电池可充电镍氢电池: 3.6V/1800mAH, 最大通话时间: ≥2 小时最大待机时间: ≥48 小时

尺寸

(长×宽×高)

200mm×174mm×59mm

重量约650g

(包括电池，不包括电源适配器)

56


17 法律声明

用户应严格按照使用说明进行操作，发生说明中未描述的情况时，请勿

擅自处理，应及时与当地代理商或者本公司取得联系，由于用户误操作造成

的损失，本公司不承担任何责任。产品规格如有变化，恕不另行通知。

57

Date post:	24-May-2018
Category:	Documents
Upload:	trannguyet
View:	216 times
Download:	1 times

Copyright Statement20&%20WP960%20User%20Manual.pdfZTE WP560/960 User Manual 2 Safety Precaution 2.1...

Documents