CORNELL PUMP COMPANY SELF-PRIMING PUMPS€¦ · efficient by design self-priming pumps cornell pump...

EFFICIENT BY DESIGN

SELF-PRIMING PUMPSCORNELL PUMP COMPANY

STX, STL & STH SERIES

INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM

FIVE-YEARWARRANTY

CORNELL

SELF-PRIMING PUMPSCORNELL

Efficient, durable, innovative and dependable are all words that people use to describe Cornell pumps. The Cornell STX, STL & STH Self-Priming Lines are the newest products from Cornell Pump following a tradition of building world-class pumping equipment.

Efficient by Design is not only our mantra, but it is also our priority when designing our equipment. The Self-Priming Line exceeds the efficiency ratings of the competition by multiple efficiency points. This improvement translates into energy cost savings over the life of the pump.

In addition to being focused on efficiency, Cornell Pump is also known for its innovative features. The Self-Priming Pumps follow this tradition by the addition of the Cycloseal® sealing system, which will extend your seal life.

Have an existing self-primer installed? Contact Cornell Pump regarding the retrofit program, which allows the Cornell STX rotating assemblies to retrofit into your existing pump volute.

CORNELL CYCLOSEAL® SEALING SYSTEM with Run-Dry™, Type 2 silicon carbide seal and grit removal system.

CORNELL PUMP FIVE-YEAR WARRANTY is standard on all STX STL, & STH pumps.

17-4 PH STAINLESS STEEL SHAFT and oversized bearings extends the operating range and reduces shaft breakage.

HIGH-EFFICIENCY DESIGN pumps more liquid using less energy for substantial savings over the life of the pump.

ADJUSTABLE WEAR PLATE is abrasion resistant and easily accessible for replacement.

MODULAR DESIGN rotating assembly for easy conversion to SAE engine driven applications.

DOUBLE-LIP SEALS with atmospheric vents provide added protection for bearings.

DUCTILE IRON CONSTRUCTION for increased durability and resistance to wear.

HIGH RPM CAPACITY for high-head and engine driven applications.

DROP-IN REPLACEMENT for many existing installations.

OVERSIZED OIL RESERVOIR provides superior bearing cooling.

THREADED IMPELLER for increased strength.

FEATURES AND BENEFITS

SELF-PRIMING PUMPS CORNELL

REMOVABLE COVER PLATECornell STX, STL & STH Pumps have a removable coverplate that provides quick access to the pump’s impeller.

INNOVATIVE FEATURES

SOLIDS HANDLING IMPELLERDuctile iron two-blade impeller handles solids up to 3” in diameter. Impeller backvanes reduce the buildup of foreign matter and pressure in the stuffing box.

HOUSING MATERIAL: Ductile Iron ASTM A536IMPELLER MATERIAL: Ductile Iron ASTM A536BACK PLATE: Ductile Iron ASTM A536DISCHARGE SIZES: 2”, 3”, 4”, 6”, and 8”FLOW RATES: Up to 2,400GPM / 545 m3/hTDH: up to 156’ / 48 mSEAL TYPE: Type II, MechanicalSOLIDS HANDLING DIAMETER: Up to 3”IMPELLER TYPE: Semi-openSHAFT: 17-4 PH Stainless steel

• Discharge check valve• CD4MCu pump end• Self-cleaning wear plate• Complete replacement rotating assembly• Optional hardened ductile impeller• Optional hardened steel wear plate• V-belt drive• SAE engine mount• Air-release valve

STX/STL SPECIFICATIONS STX/STL OPTIONAL ACCESSORIES

THE INNOVATIIVE CORNELL CYCLOSEAL® SEALING SYSTEMEliminates air and gas pockets and keeps solids away from the seal area, extending seal life up to 3 times the industry average.

INNOVATIVE FEATURESSELF-PRIMING PUMPSCORNELL

Impeller Back Vanes

Specifically-Calibrated Impeller

Quality Mechanical Seal

Backplate Deflector Vanes

Dished Backplate

Voluminous SpaceBehind Impeller

CYCLOSEAL® DESIGNThe patented, premium mechanical seal system that distinguishes our pumps from all others.

One of the main reasons STX pumps have a distinctive edge on competitors is Cornell’s patented Cycloseal design that removes solids and abrasive material from the seal area, while purging air and gas pockets. This innovative cyclonic action extends seal life and eliminates the need for venting or flush water.

TYPE II SEALSCycloseal utilizes Type II seals as part of the Cycloseal system.

SELF-ALIGNING: Automatic adjustment compensates for abnormal shaft movement, primary sealing wear, and machinery tolerances.

NON-PUSHER DESIGN: No dynamic O-rings to hang up.

All seal movement occurs in the bellows.

NO SET SCREWS: Nothing to mar the shaft or sleeve.

TEMPERATURE LIMITS: -40°F/-40°C to +160°F/70°C (Buna); -40°F/-40°C to +400°F/200°C (Viton®).*

SEAL FACES: Silicon carbide vs. silicon carbide.

ELASTOMERIC BELLOWS: Buna-N, Viton® .

HARDWARE: Stainless steel.

NON-CLOGGING SINGLE COIL SPRING: Greater dependability than multiple spring designs.

*Consult Factory for high temperature applications

CYCLOSEAL® BENEFITSExtended Seal Life: Cornell’s Cycloseal® design has proven itself in the toughest applications from manure slurry to starch recovery to clear water, food processing, self-priming and hot cooking oil applications — in some cases more than tripling the normally expected mechanical seal life.

System Savings: The Cycloseal® system requires no external water flush, filters, grease cups, piping or instrumentation normally associated with packing or double mechanical seals.

Maintenance Savings: Longer seal life which translates into less pump down time and lower maintenance costs.

Photograph reprinted with the permission of John Crane. ©John Crane 2014

Watch the Cycloseal video online to see it in action: http://www.cornellpump.com/support/videos.html

FEATURES A FIVE YEAR WARRANTY CORNELL

DUAL PROTECTION OF BEARINGS—Atmospheric barrier and double lip seals provide bearing protection in the event of seal failure.

BACK PULL-OUT DESIGN The rotating assembly can be removed without dismantling the pump or disturbing the piping.

ROTATING ASSEMBLY Cornell’s STX rotating assembly allows for retrofits of existing installations to upgrade your existing pump with Cornell Pump quality and features.

HEAVY-DUTY BEARINGS HEAVY-DUTY THRUST BEARINGS WITH SEPARATE OIL RESERVE sized for V-belt drive loads. Separate oil filling plugs for bearings and mechanical seals with sight gauges.

STX STH STL

BRINGING HIGHER HEAD, GREATER FLOW, AND MARKED EFFICIENCY, WITHOUT THE NEED FOR A BOOSTER PUMP! STH FEATURE LARGER IMPELLERS THAN STANDARD SELF-PRIMERS FOR THE SAME DISCHARGE SIZE—MOST 25% LARGER.

SPECIFICATIONSHOUSING MATERIAL: Ductile Iron ASTM A536 IMPELLER MATERIAL: Ductile Iron ASTM A536 BACK PLATE: Ductile Iron ASTM A536 DISCHARGE SIZES: 2”, 3”, and 4”, FLOW RATES: Up to 2000 GPM / 454 m3/hTDH: Up to 253’ / 77 mSEAL TYPE: Type II, Mechanical SOLIDS HANDLING DIAMETER: Up to 3” IMPELLER TYPE: Semi-open SHAFT: 17-4 PH Stainless steel

STH PERFORMANCEWith greater flow, head, efficiency, and lower NPSHr, the STH series sets a new standard for self-primers.

PUMP BEP FLOW BEP HEAD BEP EFFNPSHR @

BEPMAX HEAD

MAX FLOW MAX SPEED

Cornell 2STH 2” Discharge / 2950 RPM

310 GPM70 m3/h

128’39 m 49% 10’

3 m182’55 m

490 GPM111 m3/h 2950 RPM

Leading Competitor2” discharge / 2900 RPM

200 GPM45 m3/h

93’28 m 45% 14’

4.2 m122’37 m

220 GPM50 m3/h 2900 RPM


860 GPM195 m3/h

196’58 m 59% 18’

5.5 m253’77 m

1050 GPM238 m3/h 2200 RPM


600 GPM136 m3/h

140’43 m 57% 18’

5.5 m183’56 m

700 GPM159 m3/h 2600 RPM


1325 GPM301 m3/h

156’48 m 60% 18’

5.5 m207’63 m

2025 GPM460 m3/h 2100RPM


960 GPM218 m3/h

132’40 m 58% 19’

5.8 m182’55 m

1120 GPM254 m3/h 2400 RPM

• Discharge check valve• Self-cleaning wear plate• Complete replacement rotating assembly• Optional hardened ductile impeller• Optional hardened steel wear plate• V-belt drive • SAE engine mount • Air-release valve

OPTIONAL ACCESSORIES

STH HIGH HEAD SELF-PRIMERSCORNELL

CAPACITY0 100 200 300 400 500 600 700 800 900

Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes

8.00"VARIOUS SEMI-OPEN 1.5" 1330 3" 2" 2

TYPE :SELF PRIMINGCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.

GPM

M3/HR

FEE

T

MET

ERS

Volute

SINGLE

0002 03/23/15

01/14/14CTG MODEL : 2STH CURVE NO:

2STHVA

17 FT. (5.2 M) NPSHR

2950 RPM

3 HP

0 20 40 60 80 100 120 140 160 180 200

0

10

20

30

40

50

60

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

30%

40%

40%

45%

45%

49%47%

47%

49%2400 RPM

1800 RPM

1200 RPM

5 HP7.5 HP 10 HP

15 HP

20 HP

20%

AE

10 FT. (3.0 M)

14 FT. (4.3 M)

25 HP

2700 RPM

2100 RPM

1500 RPM30%

4 HP

6 FT. (1.8 M)

OPERATING LIMIT

2STHBEP 49%10’ NPSHR @ BEP

FAMILY

3STX

4STX6STX

8STL

2STH

3STH

4STH

SELF-PRIMING PUMP CURVES CORNELL

SELF-PRIMING PUMP CURVESCORNELL


12.38"VARIOUS SEMI-OPEN 2.5" 1230 4" 3" 2

TYPE : SELF-PRIMERCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.

0 50 100 150 200 250 300 350 400

0

10

20

30

40

50

60

70

80

90

CAPACITY

TOTA

L D

YN

AM

IC H

EA

D

0

25

50

75

100

125

150

175

200

225

250

275

300

0 200 400 600 800 1000 1200 1400 1600 1800 GPM

M3/HR

FEE

T

Volute

SINGLE

0000 07/31/14


CTG

45%

3STHVA

24 FT. (7.3M) NPSHR

2200 RPM

75 HP

MET

ERS

1800 RPM

1500 RPM

1200 RPM

50%

50%

55%

55%

58%

2000 RPM

900 RPM

58%

60 HP

50 HP

40 HP

30 HP

20 HP

10 HP

18 FT. (5.5M)

13 FT. (4.0)M)

9 FT. (2.7)M)

6 FT. (1.8)M)

40%

25 HP

15 HP

59%

0 50 100 150 200 250 300 350 400 450 500

0

10

20

30

40

50

60

70

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

240

CAPACITY0 250 500 750 1000 1250 1500 1750 2000 2250


12.38"VARIOUS SEMI-OPEN 3" 1715 6" 4" 2

TYPE :SELF-PRIMERCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith cycloseal. Other mounting styles orS.G. may require curve adjustments.

GPM

M3/HR

FEE

T

MET

ERS

Volute

SINGLE

0000 09/08/14


CTG

35%

4STHVA

23 FT. (7.0 M) NPSHR

2100 RPM

100 HP

40%45%

30%

50%

50%

55%

55%

57%

57%

59%

59%

75 HP

60 HP50 HP

40 HP

30 HP20 HP

10 HP

18 FT. (5.5 M)14 FT. (4.3 M)

10 FT. (3.1 M)

8 FT. (2.4 M)

1800 RPM

1500 RPM

1200 RPM

900 RPM

OPERATING LIMIT

60%



CAPACITY0 100 200 300 400 500 600 700 800 900


VARIOUS 9.75" SEMI-OPEN 3" 1600 4" 4" 2

TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.

0 25 50 75 100 125 150 175 200

0

10

20

30

40

50

60

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

GPM

M3/HR

FEE

T

MET

ERS

6 FT. (1.8M)

12 FT. (3.7M)

25 HP

20 FT. (6.1M) NPSHR

50%

7.5 HP

Volute

SINGLE

0002 06/23/14

06/14/13CTG MODEL : 4STX CURVE NO:

AE

3 HP

45%

4STXVA

50%

55%

55%

40%

900 RPM

5 HP

15 HP

1200 RPM

10 HP

1800 RPM

1500 RPM

650 RPM

20 HP

OPERATING LIMIT

2100 RPM9 FT. (2.7M)

16 FT. (4.9M)

53%

53%

30 HP

4STXBEP 55%15’ NPSHR @ BEP


CAPACITY0 100 200 300 400 500 600 700 800 900


VARIOUS 8.75" SEMI-OPEN 2.5" 1600 3" 3" 2



0 25 50 75 100 125 150 175 200

0

10

20

30

40

50

60

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

GPM

M3/HR

FEE

T

MET

ERS

8 FT. (2.4M)

12 FT. (3.7M)

2 HP

18 FT. (5.5M) NPSHR50%

7.5 HP

Volute

SINGLE

0003 03/19/15


AE

3 HP

45%

3STXVA

56%55%

55%

35% 40%

900 RPM

5 HP

15 HP1200 RPM

10 HP

1800 RPM

1500 RPM

650 RPM

20 HP

OPERATING LIMIT

2100 RPM

2200 RPM

1 HP

SELF-PRIMING PUMP CURVES CORNELL

CAPACITY0 200 400 600 800 1000 1200 1400 1600 1800





0 50 100 150 200 250 300 350 400

0

10

20

30

40

50

60

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

GPM

M3/HR

FEE

T

MET

ERS

8 FT. (2.4M)

14 FT. (4.3M)

25 HP

23 FT. (7.0M) NPSHR

50%

60 HP

Volute

SINGLE

0005 10/13/14


40 HP

45%

6STXVA

60%55%

55%

40%

900 RPM

50 HP

15 HP

1200 RPM

10 HP

1800 RPM

1500 RPM

20 HP

OPERATING LIMIT

1900 RPM10 FT. (3.1M)

18 FT. (5.5M)62%

58%

30 HP

62%

60%

58%

35%30%

650 RPM

5 HP

CAPACITY0 400 800 1200 1600 2000 2400 2800 3200 3600





0 100 200 300 400 500 600 700 800

0

10

20

30

40

50

60

TOTA

L D

YNA

MIC

HE

AD

0

20

40

60

80

100

120

140

160

180

200

220

GPM

M3/HR

FEE

T

MET

ERS

12 FT. (3.7M)

75 HP

25 FT. (7.6M) NPSHR

50%

60 HP

Volute

SINGLE

0004 10/13/14

04/12/14CTG MODEL : 8STL CURVE NO:

40 HP

45%

8STLVA

60%55%

65%

900 RPM50 HP

15 HP

1200 RPM

10 HP

1800 RPM

1500 RPM

20 HP

OPERATING LIMIT

19 FT. (5.8M)65%

30 HP

67%

60%

67%

16 FT. (4.9M)

35%40%5 FT. (1.5M)

8 FT. (2.4M)

25 HP650 RPM

5 HP


8STLBEP 67%20’ NPSHR @ BEP

SELF-PRIMING PUMP CURVESCORNELL


8STLBEP 67%20’ NPSHR @ BEP

CORNELLSELF-PRIMING PUMPS

Municipalities choose the Cornell Self-Priming Pump for its RELIABILITY.

Agricultural users appreciate the DURABILITY of the Cornell Self-Priming Pump.

The Cornell Self-Priming Pump’s VERSATILITY makes is popular as a rental pump.

• Industry leading efficiency• Five year warranty• STX drop- in replacement for systems• Cycloseal® sealing system• High RPM operable—engine mountable• Oversize oil-reservoir• Oversize Shaft and Bearings• Heavy duty construction

CORNELL SELF-PRIMERS FEATURE:

WE PUT OUR BEST IDEAS TO THE TESTOur modern hydraulics lab is the proving ground for all Cornell pumps. Our goal is to deliver the most efficient pumps at a time when energy costs are escalating. Technicians, under the direction of Registered Professional Engineers, conduct certified performance tests that precisely determine the performance and NPSH required for particular design conditions.

The focal point of the research facility is a 80,000 gallon (302,833 liters) closed loop system for running accurate low pressure tests. It can circulate up to 60,000 gallons (227,125 liters) of water per minute. All test motors are calibrated, and adhere to the Hydraulic Institute Standards in testing. A variable frequency drive will allow us to test pumps up to 4,000 horsepower at various speeds. Additional tests can be conducted upon customer request.

The CORNELL TEST LAB verifies the performance of all Cornell Pumps.

Cycloseal® and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;

6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and foreign patent applications.

EFFICIENT BY DESIGN

SELF-PRIMING PUMPSCORNELL PUMP COMPANY

STX & STL SERIES

INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM

FIVE-YEARWARRANTY

CORNELL SUBMERSIBLESCORNELL PUMP COMPANY

EFFICIENT BY DESIGNEFFICIENT BY DESIGN

EFFICIENT, RELIABLE, TROUBLE-FREE

EFFICIENT BY DESIGN

HYDRO TURBINECORNELL PUMP COMPANY

AGRICULTURECORNELL PUMP COMPANY

EFFICIENT BY DESIGN

INDUSTRIALCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

Immersible motors are designed to be used in dry-pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).

IMMERSIBLE MOTOR BASIC DESIGN:The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals.

The Immersible motor can withstand up to 30 feet of submergence depth for a two-week period. This exceeds the requirements of Immersible motors that is described in the industry standard “Index of

Protection” IP67. Competitive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 ‘. Hardly enough time to deal with any kind of flooding emergency!

THE IMMERSIBLE MOTOR CONCEPT:

CORNELL PUMP COMPANY // 16261 SE 130th AVE CLACKAMAS, OR2013 © ALL RIGHTS RESERVED

IMMERSIBLECORNELL PUMP COMPANY

FOOD PROCESSCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

WATER TRANSFERCORNELL PUMP COMPANY

HYDRAULIC FRACTURING

EFFICIENT BY DESIGN

REDI-PRIME PUMPSBOMBAS DE CEBADO ASISTIDO REDI-PRIME®

CORNELL PUMP COMPANY

Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338

Efficient by Design

CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY

LÍNEA DE PRODUCTOS DE CORNELL

Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;

6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.

*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:

Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.

self-priming

refrigeration municipal food process industrial

submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE

MINE DEWATERINGCORNELL PUMP COMPANY

WHEN RELIABILITY MATTERS

BOMBAS AUTOCEBANTES BOMBAS SUMERGIBLES TURBINAS BOMBAS PARA AGRICULTURA Y RIEGO

BOMBAS PARA REFRIGERACIÓN

BOMBAS DE CEBADO ASISTIDO

BOMBAS PARA ELSECTOR PÚBLICO

DESAGÜES EN MINERÍA

TRANSPORTE HIDRÁULICODE ALIMENTOS

CORPORATIVO

BOMBAS PARA EL SECTOR INDUSTRIAL

MOTORES INMERSIBLES

CUANDO LA FIABILIDAD ES LO QUE IMPORTA

MUNICIPALITIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MINING

EFFICIENT BY DESIGN


EFFICIENT BY DESIGN

CUTTER PUMPS

EFFICIENT BY DESIGN


CHOPPERCORNELL PUMP COMPANY

EFFICIENT BY DESIGNEFFICIENT BY DESIGNEFFICIENT BY DESIGN

END GUNBOOSTER PUMP


EFFICIENT BY DESIGN

FOR CENTER PIVOT IRRIGATION

HYDRAULIC SUBSCORNELL PUMP COMPANY

• Models Available - 4NNT, 6NNT, 8NNT, etc.• Discharge Sizes Available - 4 to 8 inch• Standard Construction - Cast Iron, Class 30• Optional Construction - 316SS, CD4MCU, Ductile Iron• Permco hydraulic drive

• Various adaptor plates available for hydraulic motor fit• Heavy duty shaft / bearing frame assembly• Heavy duty “wet end” construction• Manufactured in the United States

• Premium Hydraulic Efficiencies, 76 to 80% BEP• 3 inch or larger solid handling capability• Total Dynamic Head: 50 to 360 feet• Capacity: 200 to 7000 GPM

• General Agriculture, Industrial and Municipal Applications• Rental Applications• Mining Applications• Flood Control Applications• Construction / Dewatering Applications

STANDARD SPECIFICATIONS

FEATURES AND BENEFITS

PERFORMANCE CHARACTERISTICS

TYPICAL MARKETS

EFFICIENT BY DESIGN

MANURE PUMPSCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MP SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MINING PUMPS DESIGNED FOR COARSE ABRASIVES

MX SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MX SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

HIGH HEAD MINING PUMPS

SLURRY PUMPS

SLURRY PUMPSCORNELL PUMP COMPANY

CURVES

EFFICIENT BY DESIGN

SELF PRIMING SUBMERSIBLE

HYDRO TURBINE

AGRICULTURAL REFRIGERATIONMUNICIPALMINE DEWATERINGFOOD PROCESS

CUTTERCHOPPER EDGE™ HYDRAULIC SUBS MANURE MP SERIES

MX SERIES MX MINING REDI-PRIME® SLURRY

INDUSTRIAL

IMMERSIBLE

REFRIGERATIONCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

WATER TRANSFER

CORNELLPUMP.COM©2015 CORNELL PUMP COMPANY

MARKET AND PRODUCT LINEOIL & GAS


EFFICIENT BY DESIGN

OIL & GAS

AUTHORIZED CORNELL PUMP DISTRIBUTOR

Cornell Pump CompanyClackamas, Oregon, USA

P: +1 (503) 653-0330F: +1 (503) 653-0338

EFFICIENT BY DESIGN

V-SERIES PUMPSCORNELL PUMP COMPANY

FOR MEDIUM DUTY APPLICATIONS

V SERIES

CYCLOSEAL®CORNELL PUMP COMPANY

PATENTED LONG LASTING, LEAK-FREE FLUSHLESS SEALING SYSTEM

EFFICIENT BY DESIGN

Celebrating

20YEARS

1994-2014SYSTEMSYSTEM

CYCLOSEALCYCLOSEAL

CYCLOSEAL®

Date post:	02-Jul-2018
Category:	Documents
Upload:	duongtuyen
View:	213 times
Download:	0 times

CORNELL PUMP COMPANY SELF-PRIMING PUMPS€¦ · efficient by design self-priming pumps cornell pump...

Documents