Corrosion Resistant Alloy specialist
World’s largest supplier of CRA weld overlay
Global leader in supply of CRA Mechanically Lined Pipe (MLP)
One-Stop-Shop CRA capability: Pipe, fittings, induction bends, and spools
Manufacturing facilities in Indonesia (Batam Island), Brazil and Saudi Arabia*
Cost effective locations with excellent global logistics
Over 700 employees
Outstanding safety performance
API5LD, API5LC and ISO9001 accreditation
ABOUT US
* From late 2015
VISION and MISSION
Vision
Our Vision is to be the world’s leading
supplier of Corrosion Resistant
Alloy clad and lined products.
Mission
Our Mission is to understand our
customers needs and provide them
with cost effective and reliable CRA
solutions using innovative technology
and methods which put us at the
forefront of our industry.
EXPERIENCE - SUMMARY
Total CRA Pipe Produced 285 km
Total Mechanically Lined Pipe 228 km
Total WO Clad Pipe 77 km
Total WO Clad Bends 2000+ Induction Bends
Total WO Clad Fittings 20,000+ Items
Mechanically Lined 625 25 km
Mechanically Lined 825 161 km
Mechanically Lined 316L 42 km
PRODUCTS
CRA Mechanically Lined Pipe
(MLP)
CRA Weld Overlay Clad Pipe
CRA Weld Overlay Clad Fittings
Induction Bends
Seam Welded CRA Pipe
MECHANICALLY LINED CRA PIPE
The Ultimate Flow-Line Solution
Low Risk – High Reliability
Passive corrosion resistance
Fast Production time
Patented process
CS carrier pipe up to X80 for strength
Rolled and longitudinally welded CRA liner of 2.5 - 11mm thickness
Various liner options available including: 316L, 317LN, 904L,6Mo, Alloy
825, Alloy 625
Pipe diameters of 4” – 26” from current facility in 6,12 or 24m lengths
Technology tested to up to 42” diameter pipe size.
Qualified for HP/HT Lateral Buckling and Dynamic Service
Match bored weld overlaid ends for faster offshore installation
CLADTEK MLP - ADVANTAGES
Cladtek is the only supplier offering metallurgically clad ends as standard:
Hot wire GTAW/TIG overlay
Improved AUT clarity during welding
Weld overmatching for faster installation
Cladtek guarantees superior ID and OOR tolerances through machining:
+/- 0.5mm ID tolerance, rapid fit-up and superior fatigue performance
1mm maximum on OOR
Cladtek patented process uses CNC dynamic expansion control:
Operates only within elastic range of CS carrier pipe and with no change
to dimensions or mechanical properties of the carrier pipe, Superior
collapse resistance.
Suitable for SMLS, SAW, ERW, HFW, and HFI outer pipe
Only manufacturer with installed DNV F101 HFW/HFI clad pipe reference
Qualified for HP/HT Lateral Buckling Service
Qualified for Dynamic Service
CRA WELD OVERLAY CLAD PIPE
Largest weld overlay capacity in the world
Highly reliable processes and equipment
Extensive non destructive testing regime
EC, UT, RT, DP
Innovative automatic inspection technology
Laser End Measurement System
CS carrier pipe up to X80 for strength
Wide range of overlay materials available:
Alloy 625, Alloy 825, 3-400 Grade SS, Monel, Stellite
6” to beyond 60” sizes in 12m lengths
Sizes < 6” can be produced, but in lengths less than 12m.
CRA WELD OVERLAY CLAD FITTINGS
Vertical and Horizontal cladding equipment
Jigs to suit full range of sizes and fittings
Capability includes:
Elbows, Tees, Flanges, End Caps, Blinds
Special fittings and valve bodies
Barred Tee fabrication
Base material fittings can be supplied by Cladtek or Free Issue
Wide range of overlay materials available including:
Alloy 625, Alloy 825, 3-400 Grade SS, Monel, Stellite
Full machining capability to assure final dimensional tolerances and finish
API certified
INDUCTION BENDING
In-house facility in Brazil: 2” - 16” range
Batam facility being installed for 2015:
6” - 36” range
API-6A Furnace:
Full heat treatment capability
Bending service for clad and non-clad pipe
Extensive procedures available
Capability to produce 3D and 5D bends
Experience based on supply of over 2000 bends to date
SEAM WELDED CRA PIPE
Rolled and longitudinal seam welded to API5LC
Wall thickness up to 15mm
Materials
DUPLEX Stainless Steel
300 and 400 Series Stainless Steels
Alloy 625
Alloy 825
254 SMO
904L
CLAD PIPE SPOOL FABRICATION
Reduces site construction costs
Controlled environment
Maximises quality and productivity
Full services pipe spooling capability available
Fitting, Welding, Hydrotest, Painting, Packing and Crating
Highly skilled team with extensive CRA experience
Full traceability and documentation
For Onshore, Topsides, Subsea applications
Our One-Stop-Shop approach
helps our customers save
time and cost, whilst
improving quality.
TESTING and PROVING SERVICES
Purpose Build test equipment
4 Point and 2 Point Bend Testing
Lateral buckling tests
Reel lay simulations
Conventional S-Lay simulations
Hydrotest to 1400Bar by machine and
2500 Bar manual
Services available to operators, designers, and contractors
Can be used for Clad and non clad pipe
Available for proof of concept at FEED stage
Available for proof of product and/or installation method at delivery stage
FACILITIES
Batam Manufacturing Facility
Brazil Manufacturing Facility
Saudi Arabia Manufacturing
Facility*
* Under construction . Opening scheduled 2H 2015
BATAM, INDONESIA
Mechanically Lined Pipe
Weld Overlay Clad Pipe & Fittings
Testing and Simulations
Clad Pipe Spooling
Induction Bending*
Equipment Manufacture
Conveniently located to port
Over 20,000m2 state-of-the-art covered facility
19 twin head and 35 hex/quad head horizontal weld overlay machines
60+ vertical weld overlay machines
50,000m2 of pipe storage and laydown
Conveniently located near to major coating yard
* From end 2015
RIO De JANEIRO - BRAZIL
Over 5,000m2 state-of-the-art covered facility. Total 8,000m2
2 twin head and 26 single head for pipes and fittings
Strategic location close to main industries and Oil & Gas operators
Weld Overlay Clad Pipe & Fittings
Induction Bending
Heat Treatment facility
Clad Pipe Spooling
DAMMAM, SAUDI ARABIA*
Weld Overlay Clad Pipe
Weld Overlay Clad Fittings
Clad Pipe Spool Fabrication
State-of-the-art covered facility at Dammam Industrial Area 2
10 Horizontal and 20 Vertical weld overlay machines
Pipe storage and laydown
Conveniently located to port
Conveniently located near to concrete weight coating and bending facilities
* Under construction . Opening scheduled 2H 2015
QUALITY AND RELIABILITY
Quality assurance to international standards
World class quality control systems
Cutting edge technology for inspection and
verification
Automatic visual inspection
Laser scanning for discontinuities
In-house R&D team
Assured constant innovation and improvement
In-house NDE
For greater reliability and control
Cladtek: No1 in Quality and Reliability
CERTIFICATION and ACCREDITATION
Cladtek are certified to:
Quality management to ISO 9001
Safety management to ISO 18000
API Q1 – since 2010
API 5LD License 0007 - since 2008
API 5LC License 0019 – since 2010
LOGISTICS MADE EASY
Batam is a duty free zone
15km from Singapore
Major Global logistics hub
Easy inbound and outbound
materials transport
Regular shipping and airfreight
options
Flight connections to the world
Batam/Singapore ferry link
45 minutes transit time
Singapore is also a major trading hub
boasts ready availability of many services and products
WHY CRA?
Very high corrosion resistance
Well suited to CO2 and H2S presence where ordinary CS is readily corroded
Well suited to High Temperature / High Pressure applications (HTHP)
Eliminates the need for chemical injection for corrosion protection
Cleaner produced water for easier disposal
Cost effective when compared to solid products such as duplex
More reliable when compared to 13Cr materials
Highly reliable product: reduces project and operational risk
Lower whole of life cost
Minimal pigging requirements
High system cleanliness no scale or corrosion products to block filters
Cladtek: Your Partner for CRA
WHY CLADTEK
Largest capacity for CRA weld overlay in the world
Technologically superior CRA MLP product
Cost Effective CRA manufacture
Easy Logistics
Strategically located global manufacturing
capability
One-Stop-Shop CRA service
Pipe, fittings, bending, spooling
Quality and Reliability
Flexibility and friendly service
Cladtek: Your Partner for CRA
Appendices – Sample Projects
CLIENT/OWNER PROJECT GRADE QTY *
Tons
FLOWLINE
SIZE
TEMP
Deg C
Length
km
Santos/Clough/Subsea7 Mutineer Exeter,
Australia X65 - Alloy 316L2.5Mo 1410 12" 125 11
Pertamina / IKPT Sth Sumatra Gas,
Indonesia (Sour Gas) X52/Alloy 825 1350 4” 6” 8” 110 49
Shell / PDO Harweel, Oman
(Sour Gas + Oil) X65/ Alloy 825 3980 14” 16” 90 32
British Gas (BG) /
IntecSEA
Hasdrubal, Tunisia
(Sour Gas), DNV450 / Alloy 825 2200 18” 140 11
Hess Jambi Merang, Indonesia DNV360/316L 700 8” 10” 80 10
Medco Singa Lematang ,
Indonesia (Sour Gas) X52/825 200 6” 80 2
Tenaris Test Program X65/825, DNV450/316L 10 12” 16” N/a -
Pertamina PPGJ (Sour Gas) X60/825 1100 6” 120 29
Husky / Saipem Liwan, China DNV450 625 1000 22” 120 3
Husky / Saipem Liwan, China DNV450 316L 2500 12” 120 15
Repsol/Eni - Cardon IV Perla, Venezuela X65/316L 2200 14” 120 7
Exxon Mobil Damar, Malaysia DNV450/825 2800 16” 90 23
• Cladding only