C104

1/3rd A4 brochure holderOpening dimension 104mm x 32mm

2C112

Double DL & 1/3rd A4brochure holder

Opening dimension 112mm x 32mm x 2

2C110

2 compartment DL 1/3rd A4high back brochure holder

deep pocket (240mm)

Opening dimension 110mm x 45mm x 2

3C104

3 compartment 1/3rd A4brochure holder

(also for wall mounting)Opening dimension 104mm x 32mm x 3

3C110H

3 compartment DL 1/3rd

A4 counter standing(also for wall mounting)

Opening dimension 110mm x 32mm x 3

1/3

A4 S

IZE

STAN

DS

CL230

1/3rd A4 landscapebrochure holder

Opening dimension 230mm x 32mm

4C104

4 compartment 1/3rd A4brochure holder

Opening dimension 104mm x 32mm x 4

FP110

1/3rd Flat Pack brochure holderOpening dimension 110mm x 32mm. Comes flat and clips together easily to make a counter stand.

C160

A5 brochure holderOpening dimension 160mm x 32mm

2C160

2 compartment A5 deep pockets

(also for wall mounting)Opening dimension 160mm x 45mm x 2

2C155H

2 compartment A5counter standing

(also for wall mounting)Opening dimension 160mm x 32mm x 2

3C160

3 compartment A5brochure holder

Opening dimension 160mm x 32mm x 3

4C160

4 compartment A5brochure holder

Opening dimension 160mm x 32mm x 4

A5 S

IZE

STAN

DS

C230

A4 brochure holderOpening dimension

230mm x 32mm

C330

Landscape A4 Counter standing

(also for wall mounting)Opening dimension

330mm x 32mm

3C230

3 compartment A4brochure holder

Opening dimension 230mm x 32mm x 3

4C230

4 compartment A4 brochure holder

(also for wall mounting)Opening dimension 230mm x 32mm x 4Optional dividers allow for conversation

to 8 pockets DL 1/3rd A4

Multi-Use 4C330

4 compartment A4 landscapebrochure holder

(also for wall mounting)Opening dimension 330mm x 32mm x 4Optional dividers allow for conversion

to pocket sizes A4, A5, 1/3rd A4

A4 S

IZE

STAN

DS

CC104

12 pocket 1⁄3 rd A4 Rotarythis unit is also available with the ad-dition of the optional CAP210 header

unit - item code is CC104H

CC230

6 pocket A4 Rotarythis unit is also available with the ad-dition of the optional CAP210 header

unit - item code is CC230H

CC160

6 pocket A5 Rotarythis unit is also available with the ad-dition of the optional CAP210 header

unit - item code is CC160H

CC104H, CC160H, CC230H

Choice of A4, A5 or 1/3rd A4 RotaryIncluding a centre pole

and header(Image shows CC104H)

12C230

12 pocket A4 desktop carouselOverall height: 550mm

Optional divider available to dividepockets into 1/3 A4 if required

LAZY

SUS

ANS

Counter Standing: S I N G L E , D U A L A N D M U LT I - C O M PA RT M E N T L E A F L E T H O L D E R S

BC93

Landscape businesscard holder

Opening dimension 93mm x 18mm

VBC56

Portrait businesscard holder

Opening dimension 56mm x 18mm

4BC93

4 compartment businesscard holder

Opening dimension 93mm x 18mm x 4

8BC93

8 compartment businesscard holder

Opening dimension 93mm x 18mm x 8

WBC93

Wall mounted landscapebusiness card holder

Opening dimension 93mm x 18mm

W104

1/3rd A4 brochure holderOpening dimension

104mm x 32mm

W110

DL & 1/3rd A4brochure holder

Opening dimension 110mm x 32mm

3W110H

3 compartment DL 1/3rd

A4 pocket side by sideOpening dimension 110mm x 32mm x 3

4W104

4 compartment 1/3rd A4brochure holder

Opening dimension 104mm x 32mm x 4

WL230

1/3rd A4 landscapebrochure holder

Opening dimension 230mm x 32mm

W230

A4 brochure holderOpening dimension

230mm x 32mm

W330

Landscape A4brochure holder

Opening Dimension330mm x 32mm

3W230

3 compartment A4stacked wall mount

brochure holderOpening dimension 230mm x 32mm x 3

W160

A5 brochure holderOpening dimension

160mm x 32mm

2W155H

2 compartment A5brochure holder

Opening dimension 160mm x 32mm x 2

W104-B/W110-B

DL & 1/3 A4 brochure holder(with angle bracket for

counter standing)W110 - Opening dimension 110mm x 32mmW104 - Opening dimension 104mm x 32mm

AB1

Free standing adaptor clip

Adapts to W104, W110, W160,W230, 4W104

W160-B

A5 brochure holder (with angle bracket for

counter standing)Opening dimension 160mm x 32mm

W230-B

A4 portrait style brochure holder

(with angle bracket forcounter standing)

Opening dimension 230mm x 32mm

4W104-B

4 compartment 1/3rd A4brochure holder

(with angle bracket for counter standing)

Opening dimension 104mm x 32mm x 4

Wall Mounted: S I N G L E , D U A L A N D M U LT I - C O M PA RT M E N T L E A F L E T H O L D E R S

Business Card Holders:

A 4 S I Z E WA L L H O L D E R S

1 / 3 A 4 S I Z E WA L L H O L D E R S

D U A L WA L L M O U N T E D - E A S I LY C O N V E RT E D T O C O U N T E R

A 5 S I Z E WA L L H O L D E R S

WS8-D8 WS16-D16

CD-1 DividerTo Divide A4 pocketsinto 1/3rd A4 pockets.Included with kitsWS16-D16, WS16-D8WS8-D8, WS8-D4

95 cm

64 cm

16 cmCLW Clip

All Wall Systems are simple to install with first row mounting onto a Wall Strip and subsequent rows

mounting onto previous holders. Diagram depicts WS16

32 compartment 1/3rd A4 wall systemOpening dimension 104mm x 32mm x 32

16 compartment 1/3rd A4 wall system

Opening dimension 104mm x 32mm x 16

1/3

A4 S

IZE

STAN

DS

WS9 WS18-95

18 compartment A5 wall systemOpening dimension 160mm x 32mm x 18

9 compartment A5 wall systemOpening dimension 160mm x 32mm x 9

A5 S

IZE

STAN

DS

WS8 WS16

16 compartment A4 wall systemOpening dimension 230mm x 32mm x 16

8 compartment A4 wall systemOpening dimension 230mm x 32mm x 8

A4 S

IZE

STAN

DS

WS8-D4 WS16-D8

24 compartment wall system8 x A4 pockets

16 x 1/3 A4 pockets

12 compartment wall system4 x A4 pockets

8 x 1/3 A4 pockets

COM

BINA

TION

SWall Systems:

Unique AdjustableA superbly innovative product allowing forinfinite flexibility in displaying literature

A product which can be set up tohold any size material, this systemhas the bonus that single piecescan be added as required, witheach additional module creatingan extra 3 pocket display at lessthan half the cost of a standardbrochure holder.

The unique system has been de-veloped for use in all types of lo-cations, especially where wallspace is limited.

Three versions have been developed:

3PAS - For use with our unique clip-on aluminium strip, AL95. Thissystem can turn whole walss into an adjustable display system whichcan be changed to accommodate any size of material - standard ornot - at any time. Cut aluminium strip to required length and screwto wall or display board through the holes provided.

3PSW - For use with slat wall displays; modules clip into standard slatand slide to required position.

3PFB - For gluing; ideal for permanent displays.

A5 brochures(1/2 letterhead)

A4 (letterhead) landscapebrochures

1/3 A4 (trifold)landscapebrochures

and so on...

Each additionalmodule provides 3

more pockets

3PAS-5

L100

1/3rd A4 informationholder (angled)(Shown with PVC top)

V100

1/3rd A4 information holder(Double-sided - shown with

PVC top)

M120

Small information holder(Supplied with PVC cover)to hold 135mm x 120mm

VAP210

A4 information holder(double-sided - portrait style)

210mm x 297mm

WAP210-B

A4 information holder(Single-sided - wall mounted)

WAP210-B (black frame), WAP210 -C(clear frame), WAP210-W (white frame)

M210

A4 information holder(Double-sided - supplied with PVC cover)

to hold material 297mm x 210mm

AP210

A4 ad-print holder (70 deg. angle)

(Single-sided - to hold material 297mm x 210mm

L210

A4 information holder (angled)

(Shown with PVC top)

LAP210

A4 information holder (double-sided - landscape style)

210mm x 297mm

M150

A5 information holder (Double-sided - supplied with PVC cover)

to hold 210mm x 150mm

V150

A5 information holder(Double-sided - shown with

PVC top)

L150

A5 information holder (an-gled)

(Shown with PVC top)

AP150

A5 ad-print holder(70 deg. angle)

(Single-sided - to hold material 210mm x 148mm)Can also be displayed landscape

Information & Menu Holders:

Accessories:

Overprinting:

1 / 3 A 4 S I Z E H O L D E R S

A 4 S I Z E H O L D E R S ( c o n t i n u e d )

A 5 S I Z E H O L D E R S

S M A L L H O L D E R A 4 S I Z E H O L D E R S

SW1Slat wall clips attach wallmount to

slatwalls

HB1Wire grid clipsattach wall mount to

wire grids/AL95

CLWWall mount clip to attach wall mount

unit to AL95 & AL47 &W230 holders

Ring ClipRing & Screw

to secure the carouselbrochure holder to pole

PC260Placecard holder

to hold 260gsm card 90 x 60mm

CL1 & CL2Clip to attach

BC93 to brochure holders CL2 to attach

wall mounted units

CD1 DividerConverts A4 size holder to 1/3rd A4(Use with W230,

3W230, 4C230, 6CA230)CD2 Divides 4C330

pockets

Add that little bit extra toyour display!

Personalise holders with your company logo,a message or advertising slogan.

We can offer you a customised screenprint-ing service to apply your message etc di-rectly onto the brochure/information holderof your choice.

AL95950mm Aluminium Wall Hanger Strip(AL47 also avail. in 470mm size)

Carousels: MIX AND MATCH REVOLVING CAROUSEL STANDS

• A unique modular sys-tem which allows youto design your own�oor standing carousel.

• Three sizes of pocketsare available, and can bemixed and matched foryour choice ofbrochure sizes.

• Easily assembled in min-utes with the Allen keyprovided.

• Each module ofbrochure holders maybe rotated independ-ently.

• Brochure pockets are atan angle of 120o formaximum viewing.

SPECIFICATIONSCarousel height is 1460mm

Brochure modules clearplastic. Base and pole lightgrey.

Unit illustrated showsthree di�erent brochureholder modules.

CAP210 Header accessoryavailable.

Base with castors is alsoavailable on request (op-tional extra). FS1CW1

12 pocket 1/ 3 rd A4 tier for usewith any carousel

12CA104

6 pocket A4 tier for use withany carousel

(Shown with optional CD1 divider)

6CA230

6 pocket A5 tier for use withany carousel

6CA160

Optional A4 header foruse with carousel units

CS2, CS3, CS4

CAP210

Mini carousel supplied w/header & choice of tier

Height: 1210mm inc. CAP 210

MSC1CS3

A two tier �oor carouselwith two modules of

your choiceHeight: 1500mm

CS2

A four tier �oor carouselwith two modules of

your choiceHeight: 1500mm

CS4

12 pocket A4 ‘Classic’carousel

Overall height: 1500mm

12F230

24 pocket A4 ‘Classic’carousel

Overall height: 1500mm

24F230

6 pocket 1/ 3 rd A4 tier foruse with 12F230 & 24F230

(Shown with optional CD1 divider)

3W230

Mini-carousel withtray and A4 header

included

Tray carousel - 4 trays(A4 header included)

Height: 1500mm excluding headerpanel - 1900mm with header)

MCT1 CAT 4

CT460 Round tray forcarousel units

MCT1 & CAT-4

Distributor:

P and M Plastics and RubberTelephone: 07 5535 7544Facsimile: 07 5535 7522www.pmplastics.com.ausales@pmplastics.com.au