MP200 Counterweight-Balanced Universal Manipulator Flexibility & Convertibility • Conversion kits for scaling up to MP300 in handling test head up to 320kg • Selectable variety of arms: Single-Point-Fitted Tilt Arm, Dual-Point-Fitted Fork Arm • Convertible up/down axis motion from manual to motorized system (option feature) • High modularity arm configuration for different test heads High Performance • Wide range of vertical linear movement up to 780mm suitable for probers and various test handler configurations. • Up to 3000 swing rotational movement • 5 degree-of-freedom for maximized ease of operation
Transcript
MP200Counterweight-Balanced Universal Manipulator
Flexibility & Convertibility
• Conversion kits for scaling up to MP300 in handling test head up to 320kg• Selectable variety of arms: Single-Point-Fitted Tilt Arm, Dual-Point-Fitted Fork Arm• Convertible up/down axis motion from manual to motorized system (option feature)• High modularity arm con�guration for di�erent test heads
High Performance• Wide range of vertical linear movement up to 780mm suitable for probers and various test handler con�gurations.• Up to 3000 swing rotational movement• 5 degree-of-freedom for maximized ease of operation
KT Microhandling Sdn. Bhd.Plot 30, Hilir Sungai Kluang 1, Bayan Lepas Industrial Park, Phase 4, 11900 Bayan Lepas, Pulau Pinang
Tel : +604 - 641 1888Fax : +604 - 641 2888E-mail : [email protected] global sales locations and support, please visit www.ktmicrohandling.com
Adaptive Con�guration
Speci�cations
Max. Test Head Weight : 200kgUnladen Weight : 960kgLaden Weight : 1360kg
Physical Load
Physical DimensionHeight : 1940mm1
Width : 1525mm2
Depth : 1210mm3
1 Include footing 2&3 Footing excludes arm
Test Head InterfaceCustomisable tumble 4 to 8 points mountingTheta �ne adjustment (optional)
MP200Counterweight-Balanced Universal Manipulator
User InterfaceManual drive arm handleFine precision cradlePush button console (motorized option)
Movement CharacteristicsUp/Down movement : Counterweight-balanced vertical belt-driveIn/Out movement : 2-points rotational thrust bearingSide-to-side movement : 2-points rotational thrust bearingTwist movement : 1-point rotational thrust bearingTumble movement : 2-points rotational thrust bearing
Single-Point-Fitted Tilt ArmDual-Point-Fitted Fork Arm
Con�gurable Arm Option
Active Cable ManagementSingle or dual cable hanger – variable sizeVarious load capacity balancer
