Course Catalog

2012

Center For Academic Innovation &

Competitiveness (CAIC)

Universiti Malaysia Pahang

Student Course Catalog

C o u r s e C a t a l o g S e m e s t e r 1 2 0 1 2 / 2 0 1 3

COURSE CATALOG

ACADEMIC SESSION 1

2012/2013

The offering of this course is subject to the discretion of the faculty


CONTENTS

04 GUIDELINES FOR OPEN REGISTRATION

16 BLANK SCHEDULE

18 MANUAL COURSE REGISTRATION FORM

COURSES OFFERING FOR:

20 CENTRE FOR MODERN LANGUAGE & HUMAN SCIENCES

54 CO – CURRICULAR CENTRE

58 FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY (SERVICE COURSES)

68 FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINNERING

95 FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES

109 FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING

133 FACULTY OF MECHANICAL ENGINEERING

159 FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING

184 FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY

205 FACULTY OF TECHNOLOGY

236 FACULTY OF MANUFACTURING ENGINEERING



CONTENTS 1.0 WHAT IS OPEN REGISTRATION SYSTEM (OR SYSTEM)? PAGE 6

2.0 WHAT IS A PROGRAM COURSE STRUCTURE? PAGE 6

3.0 WHAT IS A STUDY PLAN? PAGE 8

4.0 WHAT ARE THE ADVANTAGES OF OR SYSTEM? PAGE 12

5.0 HOW OR SYSTEM WORKS? PAGE 12

6.0 WHAT IS THE COURSE CATALOG? PAGE 13

7.0 WHAT IS THE ROLE OF THE ACADEMIC ADVISERS? PAGE 13

8.0 HOW TO REGISTER UNDER THE OR SYSTEM? PAGE 13

9.0 WHAT IS ONLINE AND MANUAL REGISTRATION? PAGE 14

10.0 WHO ACTUALLY PRACTICE OR? PAGE 14

11.0 WHO SHALL BE CONTACTED FOR ANY HELP? PAGE 15


1.0 What is an Open Registration System (OR System)?

Open Registration System is a system that allows students to register their academic courses (some of us call them

“subjects”) based on their own Study Plan. This is possible since almost all courses are offered every semester. OR

System is different from the “Program-based Registration System” in which the student study plans are pre-determined

by the faculty based on the Program Course Structure. The current program-based system is a fixed menu system while

the OR system is a flexible menu system.

2.0 What is a Program Course Structure?

A Program Course Structure is a list of courses that lead to a particular program award for a particular student intake. In

general, a program course structure consists of four course categories: (1) university courses, (2) faculty courses, (3)

program core courses and (4) program core elective courses. An example of a Program Course Structure for Bachelor of

Chemical Engineering is shown below.

University Core Courses

Subject Code Subject Description Year

BKU1013 ENGINEERING MATHEMATICS 1 1

UQB1011 BRIGED SISWA (KOKURIKULUM I) 1

UHR1012 ISLAMIC AND ASIAN CIVILISATIONS 1 1

UHL2312 TECHNICAL ENGLISH 1

UHM1012 MALAYSIAN STUDIES 1

BKU1023 ENGINEERING MATHEMATICS II 1

UHL2322 TECHNICAL WRITING 1

UQ*2**1 CO-CURRICULUM ELECTIVE 1 2

UQ*2**1 CO-CURRICULUM ELECTIVE 2 2

UHR2012 ISLAMIC INSTITUTIONS 2

UHL2332 ACADEMIC REPORT WRITING 2

UHS1011 SOFT SKILLS I 2

UHM2022 ETHNIC RELATIONS 2

UHF1**1 FOREIGN LANGUAGE ELECTIVE LEVEL 1 3

UGE2002 TECHNOPRENEURSHIP 3

UHL4**2 ENGLISH ELECTIVE 3

UHS2011 SOFT SKILLS II 3

UHF2**1 FOREIGN LANGUAGE ELECTIVE LEVEL 2 4


Faculty Core Courses


BKF1233 APPLIED PHYSICS 1

BKF1112 ENGINEER & SOCIETY 1

BKF1223 APPLIED ORGANIC CHEMISTRY 1

BKF1213 APPLIED PHYSICAL CHEMISTRY 1

BKF1711 CHEMISTRY LAB 1 1

BKF1313 ENGINEERING MECHANICS 1

BKF1333 THERMODYNAMICS 1

BKF1243 ANALYTICAL CHEMISTRY 1

BKF1322 ELECTRICAL TECHNOLOGY 1

BKF2731 BASIC ENGINEERING LAB 2

BKF2413 CHEMICAL ENGINEERING THERMODYNAMICS 2

BKF2343 MATERIAL & ENERGY BALANCE 2

BKF2721 CHEMISTRY LAB II 2

BKF2353 FLUID MECHANICS 2

BKF2422 HEAT TRANSFER 2

BKF2443 NUMERICAL METHODS & OPTIMIZATION 2

BKF3522 ENGINEERING GRAPHICS 2

BKF2432 MASS TRANSFER 2

BKF2453 CHEMICAL REACTION ENGINEERING I 2

BKF2741 CHEMICAL ENGINEERING LAB I 2

BKF3472 CHEMICAL REACTION ENGINEERING II 3

BKF3751 CHEMICAL ENGINEERING LAB II 3

BKF3463 UNIT OPERATION I 3

BKF4791 PROCESS CONTROL & INSTRUMENTATION LAB 3

BKU4133 PROJECT MANAGEMENT & ECONOMICS 3

BKF3483 PROCESS CONTROL & INSTRUMENTATION 3

BKF3781 CHEMICAL ENGINEERING LAB III 4

BKF4916 INDUSTRIAL TRAINING 4


Program Core Courses


BKC3363 SCIENCE & ENGINEERING MATERIALS 3

BKC3492 UNIT OPERATION 2 3

BKC3761 CHEMICAL PLANT UTILITIES LAB 3

BKC3922 UNDERGRADUATE RESEARCH PROJECT I 3

BKC3533 OSH IN CHEMICAL INDUSTRIES 3

BKC3543 ENVIRONMENTAL ENGINEERING 4

BKC3912 PROCESS & PLANT DESIGN I 4

BKC4944 UNDERGRADUATE RESEARCH PROJECT II 4

BKC3771 ENVIRONMENTAL ENGINEERING LAB 4

BKC4934 PROCESS & PLANT DESIGN II 4

Program Core Elective Courses


BKC3**2 PROGRAM CORE ELECTIVE 1 4

BKC 3**2 PROGRAM CORE ELECTIVE 2 4

Students must be aware that some of the courses are pre-requisite to other advanced courses. For example, the

students must pass the UHL2312 TECHNICAL ENGLISH before registering UHL2322 TECHNICAL WRITING. Refer to faculty

for the exact pre-requisite requirements.

3.0 What is a Study Plan?

A Study Plan is a sequence of courses taken every semester towards graduation. Every semester, the students shall

register at least 16 credits to ensure graduation. According to the UMP Academic Regulation, students can register up to

19 credit hours per semester. For a full-time students, minimum of 12 credit hours are required.

Examples of two Study Plans for Bachelor of Mechatronics Engineering are shown on the next page.


STUDY PLAN 01 STUDY PLAN 02

SEMESTER 1 SEMESTER 1

UHL2312 Technical English 2 UHL2312 Technical English 2

UHR1012 Islamic and Asian Civilisations 2 UHR1012 Islamic and Asian Civilisations 2

UQB1**1 Co-Curriculum 1 1 UQB1**1 Co-Curriculum 1 1

BUM2123 Applied Calculus 3 BUM2133 Ordinary Differential Equation 3

BFM1102 Statics 2 BFM1102 Statics 2

BFM1113 Engineering Materials 3 BFM1303 Electrical/Electronics Engineering 3

BFM1602 Technical Drawing 2 BFM1602 Technical Drawing 2

BFM1801 Machining 1 1 BFM1811 Machining 2 1

Total Credit 16 Total Credit 16


UHL2322 Technical Writing 2 UHL2322 Technical Writing 2

BUM2133 Ordinary Differential Equation 3 BUM2123 Applied Calculus 3

BFM1123 Dynamics 3 BFM2003 Computer Programming 3

BFM1303 Electrical/Electronics Engineering 3 BFM1113 Engineering Materials 3

BFM1612 CAD Modeling 2 BFM1612 CAD Modeling 2

BFM1811 Machining 2 1 BFM1801 Machining 1 1



UHL2332 Academic Report Writing 2 UHL2332 Academic Report Writing 2

BFM2003 Computer Programming 3 BFM1123 Dynamics 3

BFM1133 Mechanics of Materials 3 BFM1133 Mechanics of Materials 3

BFM2403 Manufacturing Processes 1 3 BFM2403 Manufacturing Processes 1 3

BFM2603 CAD/CAM 3 BFM2603 CAD/CAM 3

BFM2801 Electrical/Electronics Lab 1 BFM2801 Electrical/Electronics Lab 1





UHS101 Soft Skills 1 1 UHF11*1 Foreign Language Level 1 1

UQ*2**1 Co-Curriculum 2 1 UQ*2**1 Co-Curriculum 2 1

BFM2013 Programming for Engineers 3 BFM3302 Sensor and Instrumentation Systems 2

BFM2203 Thermal-Fluid Engineering 1 3 BFM2203 Thermal-Fluid Engineering 1 3

BFM2303 Analog Electronics 3 BFM2303 Analog Electronics 3

BFM2313 Digital Electronics 3 BFM2313 Digital Electronics 3

BFM2821 Mechanics Lab 3 BFM2821 Mechanics Lab 3



UHF11*1 Foreign Language Level 1 1 UHS101 Soft Skills 1 1

UHS2011 Soft Skills 2 1 UHF21*1 Foreign Language Level 2 1

BFM3103 Vibrations 3 BFM3103 Vibrations 3

BFM2213 Thermal-Fluid Engineering 2 3 BFM2213 Thermal-Fluid Engineering 2 3

BFM3302 Sensor and Instrumentation Systems 2 BFM2013 Programming for Engineers 3

BFM3703 PLC and Microcontroller Systems 3 BFM3703 PLC and Microcontroller Systems 3

BFM4**3 Mechatronics Elective 1 3 BFM4**3 Mechatronics Elective 1 3



UHF21*1 Foreign Language Level 2 1 UHS2011 Soft Skills 2 1

BFM3912 Engineering Communication 2 UHM2022 Ethnic Relations 2

BFM3123 Machine Design 3 BFM3123 Machine Design 3

BFM3713 Electrical Drive System 3 BFM3713 Electrical Drive System 3

BFM3723 Fluid Drive System 3 BFM3723 Fluid Drive System 3

BFM3801 Thermal-Fluid Engineering Lab 1 BFM3801 Thermal-Fluid Engineering Lab 1





SHORT SEMESTER SHORT SEMESTER

BFM3906 Industrial Training 6 BFM3906 Industrial Training 6


UGE2002 Tehnopreneurship 2 UHE3**2 Elective Social Science 2

UHM2022 Ethnic Relations 2 BFM3912 Engineering Communication 2

BFM4923 Engineering Economy 3 BFM4912 Environment Safety & Health 2

BFM4103 Control System Engineering 3 BUM2313 Numerical Methods 3

BFM4902 Mechatronics Project 1 2 BFM4902 Mechatronics Project 1 2




UHE3**2 Elective Social Science 2 UGE2002 Tehnopreneurship 2

BUM2313 Numerical Methods 3 BFM4103 Control System Engineering 3

BFM4912 Environment Safety & Health 2 BFM4923 Engineering Economy 3

BFM4922 Engineers and Society 2 BFM4922 Engineers and Society 2

BFM4914 Mechatronics Project 2 4 BFM4914 Mechatronics Project 2 4



Total Credits 131 Total Credits 131

Notice that both Study Plans satisfy the Program Course Structure although different students register different courses.

In Semester 1, for example, the students that follow the first Study Plan register BFM1113 Engineering Materials,

BUM2123 Applied Calculus and BFM1801 Machining 1 whereas the students that follow the second Study Plan register

BUM2133 Ordinary Differential Equations, BFM1303 Electrical/Electronics Engineering and BFM1811 Machining 2.

Also, be aware that some courses are equivalent courses. This is especially true for the faculty courses. For instance,

BFM1801 Machining 1 is equivalent to BFF1801 Machining 1. The code different is just to differentiate the program of

study. Thus, students that take BFM1801 Machining 1 can also take BFF1801 Machining 1 and vice versa.


4.0 What are the advantages of OR system?

Flexibility is the main advantage of the OR System. From the student perspective, some of the advantages are:

Students can graduate early (or later if preferred!). Students can take lower or higher credits for each semester. For

those who do not want to have heavy academic loads, they can take 12 – 14 credits in a semester while for those who

are ambitious; they can take 18 – 19 credits. This will allow fast learners to graduate early and save some time and

financial cost. At the same time, OR System allows the students to accommodate their learning pace and graduate later.

Students can design their own study plan. With OR system, the sequence of the courses taken is flexible compare to the

existing system. As long as the intended courses have no pre-requisite or the pre-requisite are already passed, students

are allowed to register the intended courses. Students who are committing to extra-curricular activities (sports, student

societies etc.) for a particular semester can reduce the credit taken and then increase the credits in the following

semester or year.

Student intake is twice per year. With the OR System, students can enter UMP either in Semester I (September) or

Semester II (March) and can still graduate in four years.

Students can repeat the failed courses immediately. Currently, whenever a student fails a course, he has to wait for one

year in order to retake the course. With OR System, almost all courses are available every semester.

Students can easily involve in student exchange program. With the current system, the students are having difficulty

participating in the Student Exchange Program partly due to the fixed study plan. With OR System, students can transfer

credits easily from other participating institutions. Students also do not miss courses during the exchange program

because almost all courses are offered every semester.

Students can have a class with students from different programs of study. Currently, almost all courses are offered based

upon the specific program of study. This causes the students to have the same classmates in every course. With the OR

System, students are allowed to register in any section thus having different classmates for every course taken!

5.0 How OR System Works?

OR System works by offering almost all courses in every semester. However, the capacity of each offered course is only

half the capacity of the students enrolled.

For instance, if the course BMM1112 Statics is a requirement for all 300 Bachelor of Mechanical Engineering first year

students, it will be offered with the capacity of 180 students in Semester I and will be offered again with the capacity of

180 students in Semester II. Therefore, the students can register in either Semester I or Semester II.

As long as the students are taking 16 or more credit hours per week, they are on track to graduation.

Since the capacity is half the student enrolment, the place is given by the first-register basis (first-come first-serve basis).

The rest of the students shall take the following semester.


6.0 What is the Course Catalog?

Course Catalog is a document that lists all courses offered in that particular semester along with the time and location.

Students shall refer to the Course Catalog when registering the courses. Example (portion) of the course catalog is

shown below.

The students should refer to this course catalog when registering a course. It is important to note the section time of the

course chosen. By carefully chose the section, the students are able to register courses with timetable that does not

clash between classes.

Important: Some courses are offered both in Gambang and Pekan Campuses. Choose the proper section so that you

are able to attend the class!

7.0 What is the role of the academic advisors?

Academic advisors advice what courses should be taken in response to the student capability and plan of study. The

academic advisor will inform which courses are appropriate for a specific student requirement. Those who are in P1 or

P2 status (probation) may take different route towards graduation compare to students who are in the Dean list. In

addition to that, the academic advisor can inform the level of difficulty for each course so that the students can design

the plan of study that is mixed with heavy and light courses. In anyway, your academic advisors are your advisors in all

academic matters.

8.0 How to register under the OR System?

To register, please refer to the Student E-Community when the registration is opened. As an advice, print a blank

timetable and browse the Course Catalog and look for the courses that you want to register. Write manually to your

blank timetable first and then register online. Good luck!


9.0 What is online and manual registration?

OR System supports both online and manual registrations. Online registration is the registration when the first-come-

first-serve basis is implemented. For those who are unable to register the intended courses, they can register the

courses manually. However, the manual registration is based upon available capacity and permission of the instructor.

Manual registration can be carried out at the respective faculty. Use the Manual Course Registration Form when you

want to register manually.

10.0 Who actually practice OR?

OR System was and still implemented in the United States of America (USA). In Malaysia, UTM and UIAM are two major

universities that implement the OR System.


11.0 Who shall be contacted for any Help?

FACULTY/ CENTRE CONTACT PERSON EXTENSION NO:

FACULTY OF CHEMICAL & NATURAL RESOURCES

ENGINNERING (FKKSA) MOHAMED AZMI BIN RAMLI

09 – 549 2518 09 – 549 2838

FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES

(FKASA) ERNIE NURAZLIN BINTI LIZAM 09 – 549 2973

09 – 549 2977

FACULTY OF COMPUTER SYSTEMS & SOFTWARE

ENGINEERING (FSKKP) AZRIZULAZMI BUSTAN 09 – 549 2143

09 – 549 2147

FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY

(FSTI) RAHIATUL ADAWIYAH MOHD RUSLAN 09 – 549 2381

09 – 549 2371

FACULTY OF MANUFACTURING ENGINEERING (FKP) ZURYATY ZOL 09 – 424 5810 09 – 424 5858

FACULTY OF TECHNOLOGY (FTEK) ROSIDAH HASSAN 09 – 549 2636 09 – 549 2255

FACULTY OF MECHANICAL ENGINEERING (FKM) MOHD SHAHRI MOHD AKHIR 09 – 424 2271 09 – 424 2292

FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING

(FKEE) SYARIFAH IKHMAR AFZAN SYED ABD RAHMAN 09 – 424 2034

09 – 424 2151

CENTRE FOR MODERN LANGUAGE & HUMAN SCIENCES

(PBMSK) SAHARUDIN RAMLI 09 – 549 3041

09 – 549 3114

CO – CURRICULAR CENTRE NOOR ASHIKIN BINTI RAMLY 09 – 549 2540

CENTRE FOR ACADEMIC INNOVATION &

COMPETITIVENESS (CAIC) JULIANA MOHD ALI 09 – 549 2464

ACADEMIC MANAGEMENT DIVISION (BPA) NURULL SYAMIMI AHMAD ABZAN 09 – 549 2553 09 – 549 2633

Ggggggggg CONTACT PERSON:-

Any help with the OR System, please contact your respective faculty.


BLANK SCHEDULE

DAY / TIME

8:00 - 8:55

9:00 - 9:55

10:00 - 10:55

11:00 - 11:55

12:00 - 12:55

13:00 - 13:55

14:00-14:55

15:00 - 15:55

16:00 - 16:55

17:00 - 17:55

18:00 - 18:55

MON

TUE

WED

THU

FRI


FOR OFFICE USE (FACULTY/ PBMSK/ CO- CURRICULUM CENTRE):

_________________________ ________________________

CENTRE STAFF NAME & COP FACULTY STAFF NAME & COP (PBMSK/ FSTI/ CO-Q)

STUDENT INFORMATION

STUDENT NAME : ……………………………………………………………………………………………………

MATRIC NO. : ……………………………………………………………………………………………………

PROGRAM NAME : ……………………………………………………………………………………………………

YEAR OF STUDY : …………………………………………….. SEMESTER : ………………………………

SIGNATURE : ……………………………………………. DATE : ………………………………………

COURSE INFORMATION

COURSE CODE COURSE NAME SECTION

INSTRUCTOR APPROVAL

I HEREBY APPROVED THE STUDENT APPLICATION FOR REGISTERING THIS COURSE.

______________________ ______________________ ____________________

INSTRUCTOR SIGNATURE NAME & COP DATE

Ggggggggg MANUAL COURSE REGISTRATION FORM

INSTRUCTIONS :- 1. Fill up the form 2. Get the instructor approval 3. Send to the faculty for the registration process 4. For service courses (PBMSK/ FSTI/ CO-Q), please send a copy of this form to Centre Office

(PBMSK/ FSTI/ CO-Q) first before go to the Faculty Office for registration process

STUDENT COURSE CATALOG 18

Timetable by Program

Faculty : CENTRE FOR MODEN LANGUAGE & HUMAN SCIENCES

13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

UHF1121

Code

GERMAN FOR BEGINNERS

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

Day

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

Loc

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

Exam Pre Requisite Remark

This course is designed to give students an exposure to German language and culture as similar in German-speaking countries. The course covers the basic language skills of listening, reading, speaking and writing. Lessons are composed of individual and group work, role-play and simulation.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

UHM2022

Code

ETHNIC RELATIONS

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

05G

05G

06G

06G

07G

07G

08G

08G

09G

09G

10G

10G

11G

11G

12G

12G

Sec

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

WED

WED

WED

WED

THU

THU

THU

THU

FRI

FRI

FRI

FRI

MON

MON

Day

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

Time

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

X-DK-02

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course discusses the basic concepts and aspects related to human relations in multi ethnic society. It focused on the development of ethnic relations from the political, economic,social and religious aspects in engaging to the national integration and unity. The contemporary issues and challenges related to the development of ethnicity in Malaysia and other countries are also discussed. In general, the philosophy of this course is to promote and foster national solidarity among students as citizenship of the country.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

UHR1012

Code

ISLAMIC AND ASIAN CIVILISATIONS 1

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

05G

05G

06G

06G

07G

07G

08G

08G

09G

09G

10G

10G

11G

11G

12G

12G

21G

21G

22G

22G

Sec

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

WED

WED

WED

WED

THU

THU

THU

THU

FRI

FRI

FRI

FRI

TUE

TUE

FRI

FRI

TUE

TUE

Day

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

Time

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-01

Y-DK-02

Y-DK-02

Y-DK-02

Y-DK-02

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course is designed to equip students with a deeper understanding about Islamic and Asian civilizations particularly those civilizations which form the foundation of Malaysia. It concerns about the study of universal values promoted by Islamic and Asian civilizations. The course also discusses Western civilization in terms of its characteristics, philosophy as well as its development and how this impacts Asian civilizations, particularly the Malaysians. In addition, some contemporary civilizational issues are also being discussed. In general, the philosophy of the course is to develop students to become more aware of how Islamic and Asian civilizations have shaped our world today



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

1

2

Year

UHS1021

UHF1111

Code

SOFT SKILLS 1

MANDARIN FOR BEGINNERS

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

05G

05G

06G

06G

11G

11G

12G

12G

01G

01G

02G

02G

03G

03G

04G

04G

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

FRI

FRI

FRI

FRI

FRI

FRI

FRI

FRI

MON

MON

TUE

TUE

WED

WED

THU

THU

Day

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

Time

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

Y-DK-03

Y-DK-03

Y-DK-03

Y-DK-03

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

Mode

90

90

90

90

90

90

90

90

90

90

90

90

90

90

90

90

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course exposes students to Soft Skills which are non-job specific skills that can be used in different occupations. This module aims at creating the sense of awareness and responsibilities as UMP students in nurturing well-rounded personalities. This could be developed through the seven elements which are leadership, teamwork, communication, critical thinking and problem solving, life-long learning, entrepreneurship, and ethics and moral skills. Students could develop these skills through course work, internships, voluntary jobs and life experiences. Hence, allowing students to enhance their markebility nationality.

The course aims to enable students to speak simple Mandarin in their daily lives. The students will learn basic Chinese Phonetics (Hanyu Pinyin System), about 180 words, and basic sentence structures. They are also expected to be able to read and write 30 selected Chinese characters. Classroom activities will include listening and speaking skill practices. Reading and writing activities are also included to enhance the oral skills, Practices on certain basic grammar is also introduced. The students will be evaluated on all the four language skills - listening, speaking, reading and writing.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

3

3

Year

UHE3012

UHE3022

UHE3032

UHE3042

UHE3062

UHE3072

Code

CONTEMPORARY LEADERSHIP IN COMMUNITY

CRITICAL THINKING THROUGH LITERATURE

INTRODUCTION TO HUMAN BEHAVIOUR

ORGANIZATION COUNSELING

MALAYSIA: THE IMPACT OF GLOBALIZATION

TECHNOLOGY FOR HUMAN CAPITAL

Course Name

01G

01G

01G

01G

01G

01G

01G

01G

01G

01G

01G

01G

Sec

MON

MON

WED

WED

THU

THU

WED

WED

THU

THU

TUE

TUE

Day

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

Time

X-DK-02

X-DK-02

X-BK-01

X-BK-01

X-DK-02

X-DK-02

X-DK-01

X-DK-01

X-DK-01

X-DK-01

X-DK-02

X-DK-02

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

30

30

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N


The course is to equip students with knowledge and skills of good leadership. This subject explores the basic concept of leadership, ways and means of being leader. It includes the theoretical and practical aspects of leadership as well as issues and matters related to contemporary leadership in community.

This course aims to use literature as a subject matter that will be explored through the use ofvarious activities which engage students' critical thinking skills. it will intriduce representativeliterary genres: poetry, short story, popular culture, drama and play. this course is suitable for students who are interested in literature and in developing strong critical thinking skills asit guides students toward a greater understanding and appreciation of literature in connection to their own lives.

This course is designed to expose students to basic concepts & major aspects of psychology that related to human behavior. It discusses about the part of human being (physical, mental, spritual and emotion) from various perspectives. It is also emphasize on the aplication of psychology to diverse human activities. In general, the philosopy of this course is to provide students with a correct way of perceiving aspects of the world around them, insights into their own and others' behavior, and an appreciation of the complexity of human behavior.

This subject discusses the application of theories and practices of counseling psychology inthe work setting. The course also provides the basic framework of counseling skills to intill caring and sanity within students.

This course discusses the influence and impact of globalization on Malaysia and International Relations. The influence highlighted will be in the perspective of politics, economics and social. In general, the philosophy of the course is to facilitate borderless thinking among students.

This course is to equip students with process and techniques in human capital development by using technology. They will learn the use of computer, information systems and biofeedback devices in human development programs. The course covers various technologies in human development, personality profiling, system design, basic programming techniques, basic qualitative and quantitative analysis, EMG, GSR, HRV Biofeedback Systems and EEG Biofeedback systems. The uses of technology and theory are integrated in providing a hands-on approach to students in developing human capital.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

UHE3122

UHF1131

UHF1141

Code

ISLAMIC INSTITUTIONS

JAPANESE FOR BEGINNERS

ARABIC FOR BEGINNERS

Course Name

01G

01G

01G

01G

02G

02G

03G

03G

04G

04G

01G

01G

02G

02G

03G

03G

04G

04G

Sec

TUE

TUE

MON

MON

TUE

TUE

WED

WED

THU

THU

MON

MON

TUE

TUE

WED

WED

THU

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

X-BK-01

X-BK-01

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

Loc

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course exposes students to the comprehensiveness of Islam through the distinct of institutions. In addition, the course is designed to introduce the main characteristics in Islamic systems which cover universal aspects of management. It covers basic Islamic principles and tools in management such as syura, maslahah, hadaf and others which have been applied in particular institutions and organizations. In general, the philosophy of the course is to equip students with necessary and broad knowledge and skills about Islamic management that implemented in various institutions.

As the main aim of this course is basic communicative competence, learning in the classroom will be based on language tasks which students are likely to perform in real life, either in their native country or in Japan. Students will be equipped with basic communicative competence in the aspects of self-development, knowledge acquisition and social interaction.

The main aim of this subject is to introduce students to the Arabic language. Students will learn to speak the language in selected situations, read short passages and write simple Arabic language with correct grammar. Classroom activities focus on the four main skills: listening, speaking, reading and writing. Practice on certain basic grammar is also introduced. Students will be evaluated on the four skills namely reading, writing, listening and speaking.

Extensive written exercises give students ample opportunity to put into practice the skills they have learned, enabling them to build up confidence in reading and writing vocalised Arabic Text.Our mission is to support and enrich the students in their learning experience and conversation by enriching their Arabic vocabulary, and proper grammar usage through the use of Arabic educational flash games,quizzes,tests, and more especially the Beginners.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

UHF1151

UHF1161

UHF2111

Code

SPANISH FOR BEGINNERS

MALAY FOR BEGINNERS

MANDARIN FOR INTERMEDIATE

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

01G

01G

01G

01G

02G

02G

03G

03G

04G

04G

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

FRI

FRI

MON

MON

TUE

TUE

WED

WED

THU

THU

Day

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

CMLHS10

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHF1111

UHF1111

UHF1111

UHF1111

UHF1111

UHF1111

UHF1111

UHF1111

Pre Requisite Remark

The main aim of this subject is to introduce students to the Spanish language. Students will learn Spanish alphabets and basic sentence structures. They are expected to be able to speak simple Spanish in selected situation and also read and write in Spanish.Classroom activities will include listening and speaking skill practices, reading and also writing skill are given to enhance the oral skills. Practice on certain basic grammar is also introduced. The students will be evaluated on all four language skills-listening, speaking, reading and writing.

Pelajar-pelajar mengenal asas pembentukan kata dalam bahasa Melayu.Selain itu, mereka mengenal kata dalam bahasa Melayu dengan cara padankan kata dengan gambar dan objek-objek yang terdapat di sekitar mereka.Sebutan suku kata yang tepat membantu mereka untuk membentuk lidah ketika berbahasa Melayu.

The course aims to enable students to speak Mandarin in selected situations. The students will continue to practice the use of Chinese Phonetics (Hanyu Pinyin System). They will alsolearn additional 240 selected Chinese characters, common Chinese proverbs and are expected to be able to write simple sentences. Classroom activities will focus on language skills practices--listening, speaking, reading and writing. Chinese characters writing and translation exercises also formed part of the course. Students will be evaluated on the four language skills namely listening, speaking, reading and writing.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

UHF2121

UHF2131

Code

GERMAN FOR INTERMEDIATE

JAPANESE FOR INTERMEDIATE

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

01G

01G

02G

02G

03G

03G

04G

04G

Sec

TUE

TUE

WED

WED

THU

THU

MON

MON

TUE

TUE

WED

WED

THU

THU

MON

MON

Day

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS3

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

CMLHS12

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHF1121

UHF1121

UHF1121

UHF1121

UHF1121

UHF1121

UHF1121

UHF1121

UHF1131

UHF1131

UHF1131

UHF1131

UHF1131

UHF1131

UHF1131

UHF1131


German For Intermediate is a continuation course and intended for students who have successfully completed German For Beginners (UHF1121). This course is designed to reinforce and expand their command over grammatical structures, sharpen reading, writing, speaking, and listening skills, and gain a better understanding of the cultures of the German-speaking world.

As the main aim of this course students are equipped with intermediate proficiency in Japanese Language to enable them to communicate in Japanese language in an educational, social and working environment. This course will provide students with intermediate level reading, writing, speaking and vocabulary skills to function in a social and working environment



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

UHF2141

UHF2151

UHF2161

Code

ARABIC FOR INTERMEDIATE

SPANISH FOR INTERMEDIATE

MALAY FOR INTERMEDIATE

Course Name

01G

01G

02G

02G

03G

03G

04G

04G

01G

01G

02G

02G

03G

03G

04G

04G

01G

01G

Sec

TUE

TUE

WED

WED

THU

THU

MON

MON

MON

MON

TUE

TUE

WED

WED

THU

THU

FRI

FRI

Day

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS4

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS11

CMLHS10

CMLHS10

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHF1141

UHF1141

UHF1141

UHF1141

UHF1141

UHF1141

UHF1141

UHF1141

UHF1151

UHF1151

UHF1151

UHF1151

UHF1151

UHF1151

UHF1151

UHF1151

UHF1161

UHF1161


The main aim of this subject is to introduce students to the Arabic language. Students will learn to speak the language in selected situations, read short passages and write simple Arabic language with correct grammar. Classroom activities focus on the four main skills: listening, speaking, reading and writing. Practice on certain basic grammar is also introduced. Students will be evaluated on the four skills namely reading, writing, listening and speaking.Extensive written exercises give students ample opportunity to put into practice the skills they have learned, enabling them to build up confidence in reading and writing vocalised Arabic Text.

The course aims to enable students to speak simple Spanish in specific situations including one's learning, traveling, work place, shopping.To improve spanish grammar, nouns, verbs, vocab and simple sentences.The students develop intermediate competence in oral and written comprehension and experession of the Spanish language.Classroom activities will include listening, speaking and reading skills practices while writingskill is given to enhance the oral and reading skills. Besides that, translation exercises also from part of the classroom learning activities. The students will be evaluated on all the four language skills listening, speaking and writing. Evaluation will be in the forms of coursework and progressive tests.

Pelajar-pelajar didedahkan dengan unsur-unsur yang membentuk ayat dengan betul. Dalammasa yang sama pelajar berupaya membentuk ayat mudah. Selain itu, mereka juga memahami tentang nahu dalam bahasa Melayu. Tambahan lagi, mereka dapat menambah perbendaharaan kata dan berusaha membentuk lidah untuk berbahasa Melayu.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHE3132

UHE3142

Code

PUBLIC SPEAKING

PROJECT-BASED PROPOSAL WRITING

Course Name

01G

01G

02G

02G

01G

01G

02G

02G

03P

03P

Sec

MON

MON

TUE

TUE

TUE

TUE

THU

THU

MON

MON

Day

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

13:00-13:50

Time

CMLHS12

CMLHS12

CMLHS12

CMLHS12

X-BK-01

X-BK-01

X-BK-01

X-BK-01

X-BK-01

X-BK-01

Loc

B

B

B

B

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

Exam

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002

UHL3002


MULAI SEMESTER 2 SESI 2011/2012


The course aims to introduce students to the speech planning process. Students will be exposed to two varieties of public speaking, namely informative speaking and persuasive speaking. Students will learn how to select a topic, gather materials and supporting points, organize the body of the speech, prepare an outline and deliver the speech. Sample speeches and videos will be shown to enhance students¿ understanding of the course.

The course is designed to develop students' ability in writing a project-based proposal with regard to their final year engineering undergraduate research project (URP) or Projek Sarjana Muda (PSM). Students will be introduced to proposal writing in which emphasis is placed on academic writing conventions where grammar is implicitly embedded into the teaching and learning process. In addition, students will also be exposed to elements of citation techniques and referencing in order to avoid plagiarism. This course also utilizes online materials for students self-access activities as part of its methods of delivery and assessment.



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2400

Code

FUNDAMENTALS OF ENGLISH LANGUAGE

Course Name

01G

01G

01G

01G

02G

02G

02G

02G

03G

03G

03G

03G

04G

04G

04G

04G

05G

05G

05G

05G

06G

06G

06G

06G

07G

07G

07G

07G

08G

08G

08G

08G

09G

09G

09G

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

FRI

FRI

MON

MON

FRI

FRI

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

MON

MON

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-04

X-BK-04

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-05

X-BK-05

CMLHS8

Loc

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2400

Code


Course Name

09G

10G

10G

10G

10G

11G

11G

11G

11G

12G

12G

12G

12G

13G

13G

13G

13G

14G

14G

14G

14G

15G

15G

15G

15G

Sec

WED

MON

MON

WED

WED

MON

MON

FRI

FRI

MON

MON

FRI

FRI

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

Day

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

Loc

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N




13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2412

Code

ENGLISH FOR ACADEMIC COMMUNICATION

Course Name

01G

01G

01G

01G

02G

02G

02G

02G

03G

03G

03G

03G

04G

04G

04G

04G

05G

05G

05G

05G

06G

06G

06G

06G

07G

07G

07G

07G

08G

08G

08G

08G

09G

09G

09G

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS6

CMLHS6

X-BK-03

Loc

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This subject is equivalent with UHL2312 Technical English-



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2412

Code


Course Name

09G

10G

10G

10G

10G

11G

11G

11G

11G

12G

12G

12G

12G

13G

13G

13G

13G

14G

14G

14G

14G

15G

15G

15G

15G

16G

16G

16G

16G

17G

17G

17G

17G

18G

18G

18G

Sec

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

WED

MON

MON

WED

Day

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

Time

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

Loc

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N




13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2412

Code


Course Name

18G

19G

19G

19G

19G

20G

20G

20G

20G

21G

21G

21G

21G

22G

22G

22G

22G

23G

23G

23G

23G

24G

24G

24G

24G

Sec

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

Day

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

Time

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

Loc

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N




13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2422

Code

ENGLISH FOR TECHNICAL COMMUNICATION

Course Name

01G

01G

01G

01G

02G

02G

02G

02G

03G

03G

03G

03G

04G

04G

04G

04G

05G

05G

05G

05G

06G

06G

06G

06G

07G

07G

07G

07G

08G

08G

08G

08G

09G

09G

09G

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-02

X-BK-02

CMLHS5

CMLHS5

X-BK-03

X-BK-03

CMLHS6

Loc

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412


This subject is equivalent with UHL2322 Technical Writing-



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2422

Code


Course Name

09G

10G

10G

10G

10G

11G

11G

11G

11G

12G

12G

12G

12G

13G

13G

13G

13G

14G

14G

14G

14G

15G

15G

15G

15G

16G

16G

16G

16G

17G

17G

17G

17G

18G

18G

18G

Sec

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

WED

MON

MON

WED

Day

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

Time

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-03

X-BK-03

CMLHS6

CMLHS6

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

Loc

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412




13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2422

Code


Course Name

18G

19G

19G

19G

19G

20G

20G

20G

20G

Sec

WED

MON

MON

THU

THU

MON

MON

THU

THU

Day

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

X-BK-04

X-BK-04

CMLHS7

CMLHS7

Loc

B

L

L

B

B

L

L

B

B

Mode

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

Exam

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412




13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

Campus

DEGREE

Level Year

UHL2432

Code

ENGLISH FOR PROFESSIONAL COMMUNICATION

Course Name

01G

01G

01G

01G

02G

02G

02G

02G

03G

03G

03G

03G

04G

04G

04G

04G

05G

05G

05G

05G

06G

06G

06G

06G

07G

07G

07G

07G

08G

08G

08G

08G

09G

09G

09G

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS1

CMLHS1

X-BK-08

X-BK-08

CMLHS8

CMLHS8

CMLHS12

Loc

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422


This subject is equivalent with UHL2332 Academic Report Writing-



13-AUG-12 03:10 PM

PBMSK

Faculty

GAMBANG

PEKAN

Campus

DEGREE

DEGREE

Level

1

Year

UHL2432

UHF1121

Code


GERMAN FOR BEGINNERS

Course Name

09G

10G

10G

10G

10G

11G

11G

11G

11G

12G

12G

12G

12G

13G

13G

13G

13G

05P

05P

06P

06P

Sec

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

WED

WED

THU

THU

Day

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

Time

CMLHS12

CMLHS8

CMLHS8

CMLHS10

CMLHS10

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

X-BK-05

X-BK-05

CMLHS8

CMLHS8

CMLHS12

CMLHS12

E11F5.2

E11F5.2

E11F5.2

E11F5.2

Loc

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422


This course is designed to give students an exposure to German language and culture as similar in German-speaking countries. The course covers the basic language skills of listening, reading, speaking and writing. Lessons are composed of individual and group work, role-play and simulation.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

UHM2022

Code

ETHNIC RELATIONS

Course Name

13P

13P

14P

14P

15P

15P

16P

16P

17P

17P

18P

18P

19P

19P

20P

20P

Sec

MON

MON

MON

MON

TUE

TUE

TUE

TUE

THU

THU

THU

THU

FRI

FRI

FRI

FRI

Day

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

Time

E20BT1

E20BT1

E22BK6

E22BK6

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course discusses the basic concepts and aspects related to human relations in multi ethnic society. It focused on the development of ethnic relations from the political, economic,social and religious aspects in engaging to the national integration and unity. The contemporary issues and challenges related to the development of ethnicity in Malaysia and other countries are also discussed. In general, the philosophy of this course is to promote and foster national solidarity among students as citizenship of the country.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

1

1

Year

UHR1012

UHS1021

Code

ISLAMIC AND ASIAN CIVILISATIONS 1

SOFT SKILLS 1

Course Name

13P

13P

14P

14P

15P

15P

16P

16P

17P

17P

18P

18P

19P

19P

20P

20P

07P

07P

08P

08P

09P

09P

10P

10P

Sec

MON

MON

MON

MON

TUE

TUE

TUE

TUE

THU

THU

THU

THU

FRI

FRI

WED

WED

MON

MON

THU

THU

THU

THU

FRI

FRI

Day

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

Time

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E22BK6

E22BK6

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E20BT1

E00DK2

E00DK2

E00DK2

E00DK2

FKP-F-DK-02

FKP-F-DK-02

E00DK2

E00DK2

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

90

90

90

90

90

90

90

90

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N


This course is designed to equip students with a deeper understanding about Islamic and Asian civilizations particularly those civilizations which form the foundation of Malaysia. It concerns about the study of universal values promoted by Islamic and Asian civilizations. The course also discusses Western civilization in terms of its characteristics, philosophy as well as its development and how this impacts Asian civilizations, particularly the Malaysians. In addition, some contemporary civilizational issues are also being discussed. In general, the philosophy of the course is to develop students to become more aware of how Islamic and Asian civilizations have shaped our world today

This course exposes students to Soft Skills which are non-job specific skills that can be used in different occupations. This module aims at creating the sense of awareness and responsibilities as UMP students in nurturing well-rounded personalities. This could be developed through the seven elements which are leadership, teamwork, communication, critical thinking and problem solving, life-long learning, entrepreneurship, and ethics and moral skills. Students could develop these skills through course work, internships, voluntary jobs and life experiences. Hence, allowing students to enhance their markebility nationality.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

2

3

3

3

3

Year

UHF1111

UHE3012

UHE3032

UHE3042

UHE3062

Code

MANDARIN FOR BEGINNERS

CONTEMPORARY LEADERSHIP IN COMMUNITY

INTRODUCTION TO HUMAN BEHAVIOUR

ORGANIZATION COUNSELING

MALAYSIA: THE IMPACT OF GLOBALIZATION

Course Name

05P

05P

06P

06P

02P

02P

02P

02P

02P

02P

02P

02P

Sec

WED

WED

THU

THU

WED

WED

THU

THU

MON

MON

TUE

TUE

Day

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

Time

E11F5.1

E11F5.1

E11F5.1

E11F5.1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E20BT1

E20BT1

Loc

B

B

B

B

L

L

L

L

L

L

L

L

Mode

30

30

30

30

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N


The course aims to enable students to speak simple Mandarin in their daily lives. The students will learn basic Chinese Phonetics (Hanyu Pinyin System), about 180 words, and basic sentence structures. They are also expected to be able to read and write 30 selected Chinese characters. Classroom activities will include listening and speaking skill practices. Reading and writing activities are also included to enhance the oral skills, Practices on certain basic grammar is also introduced. The students will be evaluated on all the four language skills - listening, speaking, reading and writing.

The course is to equip students with knowledge and skills of good leadership. This subject explores the basic concept of leadership, ways and means of being leader. It includes the theoretical and practical aspects of leadership as well as issues and matters related to contemporary leadership in community.

This course is designed to expose students to basic concepts & major aspects of psychology that related to human behavior. It discusses about the part of human being (physical, mental, spritual and emotion) from various perspectives. It is also emphasize on the aplication of psychology to diverse human activities. In general, the philosopy of this course is to provide students with a correct way of perceiving aspects of the world around them, insights into their own and others' behavior, and an appreciation of the complexity of human behavior.

This subject discusses the application of theories and practices of counseling psychology inthe work setting. The course also provides the basic framework of counseling skills to intill caring and sanity within students.

This course discusses the influence and impact of globalization on Malaysia and International Relations. The influence highlighted will be in the perspective of politics, economics and social. In general, the philosophy of the course is to facilitate borderless thinking among students.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

3

Year

UHE3072

UHE3122

UHF1131

UHF1141

Code

TECHNOLOGY FOR HUMAN CAPITAL

ISLAMIC INSTITUTIONS

JAPANESE FOR BEGINNERS

ARABIC FOR BEGINNERS

Course Name

02P

02P

02P

02P

05P

05P

06P

06P

05P

05P

06P

06P

Sec

WED

WED

TUE

TUE

MON

MON

TUE

TUE

MON

MON

TUE

TUE

Day

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

12:00-12:50

13:00-13:50

12:00-12:50

13:00-13:50

Time

E20BT1

E20BT1

E00DK3

E00DK3

E11F5.2

E11F5.2

E11F5.2

E11F5.2

E11F5.1

E11F5.1

E11F5.1

E11F5.1

Loc

L

L

L

L

B

B

B

B

B

B

B

B

Mode

60

60

60

60

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N


This course is to equip students with process and techniques in human capital development by using technology. They will learn the use of computer, information systems and biofeedback devices in human development programs. The course covers various technologies in human development, personality profiling, system design, basic programming techniques, basic qualitative and quantitative analysis, EMG, GSR, HRV Biofeedback Systems and EEG Biofeedback systems. The uses of technology and theory are integrated in providing a hands-on approach to students in developing human capital.

This course exposes students to the comprehensiveness of Islam through the distinct of institutions. In addition, the course is designed to introduce the main characteristics in Islamic systems which cover universal aspects of management. It covers basic Islamic principles and tools in management such as syura, maslahah, hadaf and others which have been applied in particular institutions and organizations. In general, the philosophy of the course is to equip students with necessary and broad knowledge and skills about Islamic management that implemented in various institutions.

As the main aim of this course is basic communicative competence, learning in the classroom will be based on language tasks which students are likely to perform in real life, either in their native country or in Japan. Students will be equipped with basic communicative competence in the aspects of self-development, knowledge acquisition and social interaction.

The main aim of this subject is to introduce students to the Arabic language. Students will learn to speak the language in selected situations, read short passages and write simple Arabic language with correct grammar. Classroom activities focus on the four main skills: listening, speaking, reading and writing. Practice on certain basic grammar is also introduced. Students will be evaluated on the four skills namely reading, writing, listening and speaking.

Extensive written exercises give students ample opportunity to put into practice the skills they have learned, enabling them to build up confidence in reading and writing vocalised Arabic Text.Our mission is to support and enrich the students in their learning experience and conversation by enriching their Arabic vocabulary, and proper grammar usage through the use of Arabic educational flash games,quizzes,tests, and more especially the Beginners.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

3

Year

UHF1161

UHF2111

UHF2121

UHF2131

Code

MALAY FOR BEGINNERS

MANDARIN FOR INTERMEDIATE

GERMAN FOR INTERMEDIATE

JAPANESE FOR INTERMEDIATE

Course Name

02P

02P

05P

05P

06P

06P

05P

05P

06P

06P

05P

05P

06P

06P

Sec

MON

MON

WED

WED

FRI

FRI

WED

WED

FRI

FRI

WED

WED

FRI

FRI

Day

12:00-12:50

13:00-13:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

Time

E11F5.2

E11F5.2

E11F5.1

E11F5.1

E11F5.1

E11F5.1

E11F5.2

E11F5.2

E11F5.2

E11F5.2

E11F5.2

E11F5.2

E11F5.2

E11F5.2

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHF1111

UHF1111

UHF1111

UHF1111

UHF1121

UHF1121

UHF1121

UHF1121

UHF1131

UHF1131

UHF1131

UHF1131


Pelajar-pelajar mengenal asas pembentukan kata dalam bahasa Melayu.Selain itu, mereka mengenal kata dalam bahasa Melayu dengan cara padankan kata dengan gambar dan objek-objek yang terdapat di sekitar mereka.Sebutan suku kata yang tepat membantu mereka untuk membentuk lidah ketika berbahasa Melayu.

The course aims to enable students to speak Mandarin in selected situations. The students will continue to practice the use of Chinese Phonetics (Hanyu Pinyin System). They will alsolearn additional 240 selected Chinese characters, common Chinese proverbs and are expected to be able to write simple sentences. Classroom activities will focus on language skills practices--listening, speaking, reading and writing. Chinese characters writing and translation exercises also formed part of the course. Students will be evaluated on the four language skills namely listening, speaking, reading and writing.

German For Intermediate is a continuation course and intended for students who have successfully completed German For Beginners (UHF1121). This course is designed to reinforce and expand their command over grammatical structures, sharpen reading, writing, speaking, and listening skills, and gain a better understanding of the cultures of the German-speaking world.

As the main aim of this course students are equipped with intermediate proficiency in Japanese Language to enable them to communicate in Japanese language in an educational, social and working environment. This course will provide students with intermediate level reading, writing, speaking and vocabulary skills to function in a social and working environment



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

UHF2141

UHF2161

UHE3132

Code

ARABIC FOR INTERMEDIATE

MALAY FOR INTERMEDIATE

PUBLIC SPEAKING

Course Name

05P

05P

06P

06P

02P

02P

03P

03P

Sec

WED

WED

FRI

FRI

TUE

TUE

WED

WED

Day

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

12:00-12:50

13:00-13:50

14:00-14:50

15:00-15:50

Time

E11F5.1

E11F5.1

E11F5.1

E11F5.1

E11F5.2

E11F5.2

E11F5.2

E11F5.2

Loc

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

Exam

UHF1141

UHF1141

UHF1141

UHF1141

UHF1161

UHF1161

UHL3002

UHL3002



The main aim of this subject is to introduce students to the Arabic language. Students will learn to speak the language in selected situations, read short passages and write simple Arabic language with correct grammar. Classroom activities focus on the four main skills: listening, speaking, reading and writing. Practice on certain basic grammar is also introduced. Students will be evaluated on the four skills namely reading, writing, listening and speaking.Extensive written exercises give students ample opportunity to put into practice the skills they have learned, enabling them to build up confidence in reading and writing vocalised Arabic Text.

Pelajar-pelajar didedahkan dengan unsur-unsur yang membentuk ayat dengan betul. Dalammasa yang sama pelajar berupaya membentuk ayat mudah. Selain itu, mereka juga memahami tentang nahu dalam bahasa Melayu. Tambahan lagi, mereka dapat menambah perbendaharaan kata dan berusaha membentuk lidah untuk berbahasa Melayu.

The course aims to introduce students to the speech planning process. Students will be exposed to two varieties of public speaking, namely informative speaking and persuasive speaking. Students will learn how to select a topic, gather materials and supporting points, organize the body of the speech, prepare an outline and deliver the speech. Sample speeches and videos will be shown to enhance students¿ understanding of the course.



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level Year

UHL2400

Code


Course Name

16P

16P

16P

16P

17P

17P

17P

17P

18P

18P

18P

18P

19P

19P

19P

19P

20P

20P

20P

20P

21P

21P

21P

21P

22P

22P

22P

22P

23P

23P

23P

23P

24P

24P

24P

Sec

TUE

TUE

THU

THU

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

FRI

FRI

MON

MON

FRI

FRI

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

FRI

FRI

MON

MON

FRI

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

Time

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

FKP-A-BK-02

FKP-A-BK-02

E11F5.4

E11F5.4

FKP-A-BK-02

FKP-A-BK-02

E11F5.4

E11F5.4

FKP-A-BK-02

FKP-A-BK-02

E11F5.4

E11F5.4

FKP-A-BK-02

FKP-A-BK-02

E11F5.4

Loc

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level Year

UHL2400

Code


Course Name

24P

25P

25P

25P

25P

Sec

FRI

TUE

TUE

THU

THU

Day

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

E11F5.4

E22BT6

E22BT6

E11F5.3

E11F5.3

Loc

B

L

L

B

B

Mode

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N




13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level Year

UHL2412

Code


Course Name

25P

25P

25P

25P

26P

26P

26P

26P

27P

27P

27P

27P

28P

28P

28P

28P

29P

29P

29P

29P

30P

30P

30P

30P

31P

31P

31P

31P

32P

32P

32P

32P

33P

33P

33P

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

MON

MON

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.2

E11F5.2

FKP-A-BK-03

Loc

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This subject is equivalent with UHL2312 Technical English-



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level Year

UHL2412

Code


Course Name

33P

34P

34P

34P

34P

35P

35P

35P

35P

36P

36P

36P

36P

37P

37P

37P

37P

38P

38P

38P

38P

39P

39P

39P

39P

40P

40P

40P

40P

Sec

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

Day

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

Time

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

Loc

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N




13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

Campus

DEGREE

Level Year

UHL2422

Code


Course Name

21P

21P

21P

21P

22P

22P

22P

22P

25P

25P

25P

25P

26P

26P

26P

26P

27P

27P

27P

27P

28P

28P

28P

28P

29P

29P

29P

29P

30P

30P

30P

30P

35P

35P

35P

Sec

TUE

TUE

THU

THU

TUE

TUE

THU

THU

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

MON

MON

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

Time

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

FKP-A-BK-03

FKP-A-BK-03

E11F5.2

E11F5.2

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

FKP-A-BK-03

FKP-A-BK-03

E11F5.1

E11F5.1

FKP-A-BK-03

FKP-A-BK-03

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.1

E11F5.1

E22BT5

E22BT5

E11F5.2

Loc

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412


This subject is equivalent with UHL2322 Technical Writing-



13-AUG-12 03:10 PM

PBMSK

Faculty

PEKAN

NO TIMETABLE

Campus

DEGREE

DEGREE

Level Year

UHL2422

UHL2432

Code



Course Name

35P

36P

36P

36P

36P

14P

14P

14P

14P

15P

15P

15P

15P

16P

16P

16P

16P

17P

17P

17P

17P

18P

18P

18P

18P

19P

19P

19P

19P

20P

20P

20P

20P

Sec

THU

MON

MON

THU

THU

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

Day

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

Time

E11F5.2

E22BT5

E22BT5

E11F5.2

E11F5.2

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

E11F5.3

E11F5.3

E22BT6

E22BT6

Loc

B

L

L

B

B

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

B

B

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

UHL2412

UHL2412

UHL2412

UHL2412

UHL2412

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422

UHL2422


This subject is equivalent with UHL2332 Academic Report Writing-



13-AUG-12 03:10 PM

PBMSK

Faculty

NO TIMETABLE

Campus

DEGREE

Level

2

Year

UHS2021

Code

SOFT SKILL 2

Course Name

01G

02G

03G

04G

05P

06P

07P

Sec Day Time Loc Mode

90

90

90

90

90

90

90

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff Exam

UHS1021

UHS1021

UHS1021

UHS1021

UHS1021

UHS1021

UHS1021


-



Faculty : STUDENTS AFFAIRS & ALUMNI

13-AUG-12 03:11 PM

JHEPA

Faculty

NO TIMETABLE

Campus

DEGREE

Level

1

1

Year

UQB1011

UQD2011

Code

BRIGED SISWA (KOKURIKULUM I)

ROBOCON

Course Name

10G

10P

11G

11P

12G

12P

13G

14G

15G

16G

17G

18G

1G

1P

2G

2P

3G

3P

4G

4P

5G

5P

6G

6P

7G

7P

8G

8P

9G

9P

1P


40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


KURSUS INI KURSUS BERSEPADU MENGGABUNGKAN ASPEK KEPIMPINAN, DEDIKASI, KOMUNIKASI DAN JUGA ASAS PERTOLONGAN CEMAS SERTA KAWAD KAKI YANG MELIBATKAN TEORI DAN PRAKTIKAL.

-



13-AUG-12 03:11 PM

JHEPA

Faculty

NO TIMETABLE

Campus

DEGREE

Level

1

1

1

1

1

1

1

1

1

1

Year

UQN2031

UQP2061

UQS2011

UQS2021

UQS2031

UQS2041

UQS2051

UQS2081

UQS2111

UQS2121

Code

ANYAMAN

KEPIMPINAN

KAYAK

TREKKING

SILAT OLAHRAGA

BOLA SEPAK

HOKI

ARCHERY

MOUNTAIN BIKE

PAINTBALL

Course Name

1G

1G

1P

1G

1P

1G

1P

2G

2P

1G

1P

1G

1P

1G

1G

1P

1G

1G

1P


40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-

-

KURSUS INI MENEKANKAN KEMAHIRAN ASAS BERKAYAK , CARA MENYELAMAT, PERATURAN DAN UNDANG-UNDANG BERKENAAN SUKAN INI.

Latar belakang dan pengenalan kepada kegiatan luar, kemahiran asas dalam perkhemahan,ancaman hidupan liar komunikasi,kepimpinan di dalam kegiatan luar , kecemasan , teknik-teknik treking/hiking, pengenalan navigasi dan perilaku ekspedisi.

Sukatan kursus ini merangkumi aspek-aspek penguasaan kemahiran, pengembangan pengetahuan, kecergasan fizikal dan latihan kemahiran.

Kursus ini menekankan asas kemahiran bola sepak, struktur organisasi latihan dan pertandingan, peraturan dan undang-undang dan kepegawaian sukan berkenaan.

Kursus ini menekankan kemahiran asas sukan hoki , struktur organisasi latihan dan pertandingan, peraturan dan undang-undang sukan berkenaan.

-

-

-



13-AUG-12 03:11 PM

JHEPA

Faculty

NO TIMETABLE

Campus

DEGREE

Level

1

1

2

2

2

2

2

2

2

Year

UQS2131

UQS2141

UQN2011

UQN2021

UQP2011

UQP2021

UQS2061

UQS2071

UQS2091

Code

BASKETBALL

RC SPEED BOAT

MUZIK KOMPANG

NASYEED

KAUNSELOR SISWA

IQRA

BOLA BALING

KRIKET

FITNESS

Course Name

1G

1P

1P

1G

1P

1G

1P

1G

1P

1G

1G

1P

1G

1G

1P


40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-

-

KURSUS INI MEMBINCANGKAN MENGENAI MUZIK KOMPANG DARI ASPEK SEJARAH , PERALATAN,KATEGORI LAGU DAN TRADISI PERSEMBAHAN.

-

1.Membincangkan sejarah kaunseling rakan sebaya, perkembangan dan kesan pengaruh terhadap pembangunan masyarakat.2.Mendedahkaan kepada pelajar kemahiran asas sebagai kaunselor rakan sebaya.3. Subjek ini menggunakan pelbagai pendekatan pengajaran.

-

-

-

-



Faculty : FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY

13-AUG-12 03:18 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

Year

BUF1113

BUM1123

BUM1213

Code

BASIC PHYSICS

MATHEMATICS FOR MANAGEMENT

FUNDAMENTAL DISCRETE STRUCTURE

Course Name

01G

01G

01G

02G

02G

02G

01

01

01

01

01

01

02

02

02

03

03

03

Sec

MON

TUE

THU

MON

MON

TUE

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

13:00-13:50

13:00-13:50

13:00-13:50

16:00-16:50

17:00-17:50

16:00-16:50

12:00-12:50

12:00-12:50

12:00-12:50

08:00-08:50

08:00-08:50

08:00-08:50

11:00-11:50

11:00-11:50

11:00-11:50

16:00-16:50

16:00-16:50

16:00-16:50

Time

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-K-01

W-DKU-K-01

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

50

50

50

50

50

50

90

90

90

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG ADALAH 01 DAN 02, SEKSYEN DIPEKAN 03 DAN 04.

This course introduces a fundamental of physics. It covers unit and measurements, kinematics, forces and Newton¿s law of motion, statics equilibrium, work, energy and power,fluid mechanics, electric and magnetism.

This subject introduces the use of mathematical technique in the field of business administration and management. The topics introduce to the mathematical parts which are inequality, matrices, functions and the key business topics such as simple interest, compound interest, promissory notes,discount, markup and markdown.

This subject introduces and discusses the fundamental of the discrete as apply to computer science, focussing on providing a basic theoretical foundation for further work. Students are exposed to logic, set theory, elementary number theory, functions and relations, basic of counting, boolean algebra, and proof techniques. This course integrates symbolic tools, graphical concepts, and numeral calculations.



13-AUG-12 03:18 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BUM2123

Code

APPLIED CALCULUS

Course Name

01G

01G

01G

02G

02G

02G

03G

03G

03G

04G

04G

04G

05G

05G

05G

06G

06G

06G

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

12:00-12:50

12:00-12:50

12:00-12:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

75

75

75

60

60

60

75

75

75

75

75

75

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN UNTUK DIGAMBANG BERMULA 01 SEHINGGA 06 DAN SEKSYEN UNTUK DIPEKAN BERMULA 07 SEHINGGA 12

This course introduces Polar Coordinates and Vector, Vector-Valued Functions, Partial Derivatives and Multiple Integrals.



13-AUG-12 03:18 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

2

Year

BUM2133

BUM2223

Code

ORDINARY DIFFERENTIAL EQUATIONS

DISCRETE STRUCTURE & APPLICATIONS

Course Name

01G

01G

01G

02G

02G

02G

03G

03G

03G

04G

04G

04G

05G

05G

05G

06G

06G

06G

01

01

01

02

02

02

03

03

03

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

11:00-11:50

11:00-11:50

11:00-11:50

14:00-14:50

14:00-14:50

14:00-14:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

09:00-09:50

09:00-09:50

09:00-09:50

12:00-12:50

12:00-12:50

12:00-12:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

W-DK-16

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Y-BK-06

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

75

75

75

75

75

75

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BUM1213

BUM1213

BUM1213

BUM1213

BUM1213

BUM1213

BUM1213

BUM1213

BUM1213


SEKSYEN UNTUK DIGAMBANG BERMULA 01 SEHINGGA 06 DAN SEKSYEN DIPEKAN BERMULA 07 SEHINGGA 12

This course introduces to the Ordinary Differential Equations, Laplace Transform and Fourier Series and their applications in solving engineering problems.

This subject discusses an in depth of the discrete structures as they apply to computer science, focusing on providing a basic theoretical foundation for further work. Topics include review on algorithm, integers and matrices, advance counting technique, graphs, trees, and modeling computation. This course integrates symbolic tools, graphical concepts, and numerical calculations.



13-AUG-12 03:18 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

Year

BUM2313

Code

NUMERICAL METHODS

Course Name

01G

01G

01G

02G

02G

02G

03G

03G

03G

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

11:00-11:50

11:00-11:50

11:00-11:50

13:00-13:50

13:00-13:50

13:00-13:50

16:00-16:50

16:00-16:50

16:00-16:50

Time

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

W-DK-18

Loc

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG BERMULA 01 SEHINGGA 03 DAN SEKSYEN DIPEKAN BERMULA 04 SEHINGGA 09

This course introduces basic concepts of round-off and truncation errors,roots of equations, linear algebraic equations and matrices, curve fitting, numerical differentiation and integration, ordinary differential equations and partial differential equations. Appropriate software is used by students to implement some of these ideas in practice.



13-AUG-12 03:18 PM

FSTI

Faculty

GAMBANG

PEKAN

Campus

DEGREE

DEGREE

Level

2

Year

BUM2413

Code

APPLIED STATISTICS

Course Name

01G

01G

01G

02G

02G

02G

03G

03G

03G

04G

04G

04G

05G

05G

05G

06G

06G

06G

07G

07G

07G

08G

08G

08G

09G

09G

09G

10G

10G

10G

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

13:00-13:50

13:00-13:50

13:00-13:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

75

75

75

75

75

75

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG BERMULA 01 SEHINGGA 10 DAN SEKSYEN DIPEKAN BERMULA 11 SEHINGGA 16. SUBJEK INI H

Students are exposed to statistics including statistical problem-solving methodology and descriptive statistic, probability distributions commonly used in practice, sampling distributionand confidence interval, hypothesis testing, analysis of variance (ANOVA), goodness of fit test and contingency tables and regression and correlation including simple and multiple linear regressions. Appropriate software is used by students to implement some of these ideas in practice.



13-AUG-12 03:18 PM

FSTI

Faculty

PEKAN

Campus

DEGREE

Level

1

1

Year

BUF1113

BUM2123

Code

BASIC PHYSICS

APPLIED CALCULUS

Course Name

03P

03P

03P

04P

04P

04P

07P

07P

07P

08P

08P

08P

09P

09P

09P

11P

11P

11P

12P

12P

12P

Sec

MON

TUE

TUE

MON

THU

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

13:00-13:50

13:00-13:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

11:00-11:50

11:00-11:50

11:00-11:50

15:00-15:50

15:00-15:50

15:00-15:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

E00DK2

E00DK2

E00DK2

E00DK3

E00DK3

E00DK3

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

M22BK6

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

50

50

50

50

50

50

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG ADALAH 01 DAN 02, SEKSYEN DIPEKAN 03 DAN 04.

SEKSYEN UNTUK DIGAMBANG BERMULA 01 SEHINGGA 06 DAN SEKSYEN UNTUK DIPEKAN BERMULA 07 SEHINGGA 12

This course introduces a fundamental of physics. It covers unit and measurements, kinematics, forces and Newton¿s law of motion, statics equilibrium, work, energy and power,fluid mechanics, electric and magnetism.

This course introduces Polar Coordinates and Vector, Vector-Valued Functions, Partial Derivatives and Multiple Integrals.



13-AUG-12 03:18 PM

FSTI

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BUM2133

Code

ORDINARY DIFFERENTIAL EQUATIONS

Course Name

07P

07P

07P

08P

08P

08P

09P

09P

09P

10P

10P

10P

11P

11P

11P

12P

12P

12P

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

11:00-11:50

11:00-11:50

11:00-11:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

Time

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

E21BK4

E21BK4

E21BK4

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

E21BK4

E21BK4

E21BK4

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN UNTUK DIGAMBANG BERMULA 01 SEHINGGA 06 DAN SEKSYEN DIPEKAN BERMULA 07 SEHINGGA 12

This course introduces to the Ordinary Differential Equations, Laplace Transform and Fourier Series and their applications in solving engineering problems.



13-AUG-12 03:18 PM

FSTI

Faculty

PEKAN

Campus

DEGREE

Level

2

Year

BUM2313

Code

NUMERICAL METHODS

Course Name

04P

04P

04P

05P

05P

05P

06P

06P

06P

07P

07P

07P

08P

08P

08P

09P

09P

09P

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

13:00-13:50

13:00-13:50

13:00-13:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

M21BK3

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG BERMULA 01 SEHINGGA 03 DAN SEKSYEN DIPEKAN BERMULA 04 SEHINGGA 09

This course introduces basic concepts of round-off and truncation errors,roots of equations, linear algebraic equations and matrices, curve fitting, numerical differentiation and integration, ordinary differential equations and partial differential equations. Appropriate software is used by students to implement some of these ideas in practice.



13-AUG-12 03:18 PM

FSTI

Faculty

PEKAN

Campus

DEGREE

Level

2

Year

BUM2413

Code

APPLIED STATISTICS

Course Name

11P

11P

11P

12P

12P

12P

13P

13P

13P

14P

14P

14P

15P

15P

15P

16P

16P

16P

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

12:00-12:50

12:00-12:50

12:00-12:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

E21BK4

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SEKSYEN DIGAMBANG BERMULA 01 SEHINGGA 10 DAN SEKSYEN DIPEKAN BERMULA 11 SEHINGGA 16. SUBJEK INI H




Faculty : FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING

13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

Year

BKB1233

BKF1243

BKF1253

Code

BIOLOGY FOR ENGINEERS

ANALYTICAL CHEMISTRY

PHYSICAL CHEMISTRY

Course Name

01

01

01

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

Sec

THU

THU

FRI

MON

MON

WED

THU

THU

FRI

THU

THU

FRI

MON

MON

WED

THU

THU

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

10:00-10:50

11:00-11:50

10:00-10:50

08:00-08:50

09:00-09:50

08:00-08:50

16:00-16:50

17:00-17:50

16:00-16:50

10:00-10:50

11:00-11:50

10:00-10:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

W-DK-07

W-DK-07

W-DK-07

W-DK-01

W-DK-01

W-DK-01

W-DK-03

W-DK-03

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course provides an introduuction to biology for those who do not have biology background. The course covers theory, structure and functions of the cells as a unit life, physical and chemical properties of the molecules, enzyme, cellular respiration, photosynthesis, cell division and biological information. After completing this course, students should be familiar with the biology elements and convey the knowledge in other related courses.

The syllabus covers the basic knowledge and application of sample and data handling, calibration techniques and quality of analysis in analytical laboratory. It also deals with separation techniques and its basis application such as solid phase extraction, GC and HPLC. The introduction to the theory and application of spectroscopic techniques used in chemical analysis such as UV-Vis, FT-IR, MS and AAS are dicussed. The combinations of above techniques with their advantages are covered in this course.

This course discusses some introductory to thermodynamics in physical chemistry followed by continuition topics related to liquids and their mixtures, principles of chemical equilibrium and rate of reactions. The solids surfaces including their applications will also be discussed in this course. The development of key skills is facilitated by a program of tutorials and practices



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

Year

BKF1313

BKF1323

Code

ENGINEERING MECHANICS

ORGANIC CHEMISTRY

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

01

01

01

02

02

02

03

03

03

Sec

MON

MON

TUE

TUE

TUE

TUE

WED

WED

THU

THU

FRI

FRI

MON

MON

FRI

TUE

TUE

THU

THU

THU

FRI

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

15:00-15:50

Time

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This subject will introduce students with concept of statics and dynamics and its application in related engineering field. The topics covered in this subject are static of particle, static of rigid body, distributed forces, analysis of structure, friction, kinematics and kinetics of particles. By completing the course, students will comprehend the basic mechanisms and applications of statics and dynamics in related engineering field.

This course discuss the fundamental theory of the properties, synthesis and organic reactions where use the functional group as framework as a basic level courses with an organic cehmical content. This course focuses on the key concepts of organic chemistry through a study of the reactions of selected nonfunctional aliphatic, alicyclic, cyclic and aromatic molecules. Particular emphasis is placed on the underlying mechanistic pathways that are involved and their stereochemical consequences. the stereochemistry of the molecular structure is also considered.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

Year

BKF1333

BKF1513

Code

THERMODYNAMICS

INTRODUCTION TO CHEMICAL ENGINEERING

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

01

01

01

02

02

02

03

03

03

Sec

MON

MON

TUE

TUE

TUE

TUE

WED

WED

THU

THU

FRI

FRI

MON

MON

FRI

TUE

TUE

THU

THU

THU

FRI

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

15:00-15:50

Time

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-01

W-DK-01

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-01

W-DK-01

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

W-DK-02

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course is designed to introduce basic concept in thermodynamic in a thorough way. Topics cover are properties of pure substances, thermodynamics system, heat transfer through conduction, convection and radiation, the first law of thermodynamics for closed systems, open systems and their application in steady-flow and unsteady-flow processes, the second law of thermodynamics, entropy, introduction to refrigeration and steam power plant.

This subject gives an overview of engineering, the profession and its requirement in Malaysian scenario, and prepares the students for the Chemical Engineering Program. Topics will include ethics, management, and contribution of engineering, as well as generic skills and study skills. Generic skills to be covered are basic calculations, units conversions, creating engineering graphs and solving iterative problems on computer. Students will be taken on industrial visits as part of the exposure to the real working environment of chemicalengineers in particular and engineers in general.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

1

2

2

Year

BKF2711

BKB2132

BKB2212

Code

CHEMISTRY LAB

MOLECULAR & CELL BIOLOGY

BIOCHEMISTRY

Course Name

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

01

01

01

01

Sec

MON

MON

MON

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

FRI

FRI

FRI

FRI

FRI

FRI

TUE

TUE

MON

MON

Day

14:00-14:50

15:00-15:50

16:00-16:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

FTA01L

W-DK-03

W-DK-03

W-DK-01

W-DK-01

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

0

30

0

30

0

30

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y


-

-

The subject provides an overview of fundamental concepts in biochemistry, which focuses upon the major macromolecules and chemical properties of living systems. Important topics include the structure and function of water, amino acids, proteins, carbohydrates and lipids. The application of buffers as well as enzyme kinetics will be extensively emphasized. Various metabolisms for carbohydrates and lipids will be discussed in detail. The course will be completed by genetic elements of cells involving nucleic acids and genetic information.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BKB2412

BKB2761

Code

INDUSTRIAL BIOTECHNOLOGY

BIOCHEMISTRY & MICROBIOLOGY LABORATORY

Course Name

01

01

01

01

01

02

02

02

Sec

THU

THU

TUE

TUE

TUE

FRI

FRI

FRI

Day

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

W-DK-06

W-DK-06

FTA10L

FTA10L

FTA10L

FTA10L

FTA10L

FTA10L

Loc

L

L

B

B

B

B

B

B

Mode

60

60

30

30

30

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

N

N

N

N

N

N


The subject introduces students to introductory microbiology and fundamentals of biochemical engineering as used in industrial biotechnology. Microorganisms, microbial growth, nutrition and design of industrial growth media are discussed. Design and operation of clean-in-place systems, cleanrooms and heating, ventilation and air-conditioning (HVAC) systems are covered. Facility layout and engineering for compliance with Good Manufacturing Practices are discussed. Design for containment and validation are covered. Flowsheets of several representative industrial microbial processes are discussed. Case studies and visits to relevant biotechnology industry facilities are used to illustrate key concepts

This course covers basic handling of microbial culture using aseptic techniques. Consideration will be given to microbial cultures and enzyme kinetics. This course will also emphasize on the introduction to biochemistry, including appropriate analytical techniques that are DNS calorimetric method, burette method, UV-VIS spectrophotometer and protein concentration



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

2

Year

BKF2143

Code

COMPUTER PROGRAMMING FOR ENGINEERS

Course Name

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

03

03

03A

03A

03B

03B

Sec

MON

MON

TUE

TUE

THU

THU

MON

MON

WED

WED

THU

THU

THU

THU

FRI

FRI

FRI

FRI

Day

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

Time

W-DK-02

W-DK-02

FTA16L

FTA16L

FTA16L

FTA16L

W-DK-03

W-DK-03

FTA16L

FTA16L

FTA16L

FTA16L

W-DK-02

W-DK-02

FTA16L

FTA16L

FTA16L

FTA16L

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

60

60

30

30

30

30

60

60

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This subject aims to introduce the fundamental element and feasibilities of the computer programming by using Excel and MATLAB mathematical computing program. Students will be taught on analyzing data, developing a program using m-file and using the command window. solve general engineering mathematical equations in MATLAB, displaying the data via 2D and 3D graphs and to learn to develop the graphical user interface (GUI) for program.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BKF2343

BKF2353

Code

MATERIAL & ENERGY BALANCE

FLUID MECHANICS

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

01

01

01

02

02

02

03

03

03

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

THU

THU

FRI

FRI

MON

MON

TUE

TUE

TUE

WED

THU

THU

FRI

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

10:00-10:50

11:00-11:50

10:00-10:50

15:00-15:50

16:00-16:50

15:00-15:50

Time

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


Material and Energy Balance (MEB) course helps students to understand and acquire basic knowledge and skill in engineering calculations usually used in chemical processes. Beginning with chapter 1 and 2, conversion of units and determination of process variables is taught on how scale differs as resulted in using different units within particular dimension of measurement and how variables of a process are identified and calculated. Next, from chapter 3 to 7, material balance calculations are taught covering various aspects of mass and mole change in a system. Furthermore, consequences appeared when different numberof phase is considered in a system are taken into account in the subsequent chapters: 9 to 12. Finally, energy balance associated with the material system is taught from chapter 13 to 15 to complete a conceptual design of chemical process system. The ultimate gold of this course is to aid student to develop MEB of a process in Excel and Aspen Plus.

To introduce the concept and use of fluid mechanics, both static and kinematics,Bernoulli?s equation, impact of momentum and analysis of pipeline problems which related tochemical engineering. The topics cover are fluid properties, fluid static and kinematics,momentum equation and its applications, analysis of pipe flow and steady flow in pipelinesystems, pump and flow in chemical engineering equipment.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BKF2413

BKF2731

Code

CHEMICAL ENGINEERING THERMODYNAMICS

BASIC ENGINEERING LAB

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

Sec

MON

MON

TUE

TUE

TUE

WED

THU

THU

FRI

MON

MON

MON

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

FRI

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

10:00-10:50

11:00-11:50

10:00-10:50

15:00-15:50

16:00-16:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

FTA02L

Loc

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BKF1333

BKF1333

BKF1333

BKF1333

BKF1333

BKF1333

BKF1333

BKF1333

BKF1333


This subject mainly covers the topics of pure substances, heat effects, thermodynamics properties, VLE, thermodynamics solution and chemical reaction equilibrium. the course covers the teory and applications of thermodynamics concept and deals with composition dependent thermodynamics relations. this course requires conceptual thinking and requires greater mathematical sophistication to generate ideas and problem solving.

In basic engineering lab, students are required to perform laboratory work on the Bomb Calorimeter, Rockwell Hardness Tester, Losses in Pipe System, Marcet Boiler, Stability of Floating Body Apparatus, Vortex Apparatus, Tensile and Brinell Machine, Twist and BendingMachine and Sieving Apparatus. The aim is to strengthen the student¿s fundamental knowledge as it covers all the basic engineering subject such as fluid mechanics, strength ofmaterial and thermodynamics.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

2

3

3

3

Year

BKF3522

BKB3423

BKB3781

BKB4493

Code

ENGINEERING GRAPHICS

BIOREACTOR ENGINEERING

BIOSEPARATION ENGINEERINGLAB

BIOSEPARATION ENGINEERING

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

MON

TUE

TUE

THU

MON

MON

MON

WED

WED

FRI

Day

15:00-15:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

14:00-14:50

10:00-10:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

10:00-10:50

Time

FTA17L

FTA17L

FTA17L

W-DK-06

W-DK-06

W-DK-06

FTA10L

FTA10L

FTA10L

V-BK-05

V-BK-05

V-BK-05

Loc

B

B

B

L

L

L

B

B

B

L

L

L

Mode

0

0

0

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

N

N

N

Y

Y

Y


This particular course will introduce the usage of four common engineering tools for simulation and drawing to students, i.e; Aspen Plus, Microsoft Visio, Solidworks and AutoCAD 2008. Aspen Plus will involve dynamic process simulation. Others software deal with standards of drawing instruments, lettering, lines, dimensioning, geometrical constructions, principle of orthographic and isometric projections. Beside that, student will beteach on the basic construction of PFD and P& ID diagrams, as well as applying the softwares to draw 2D and 3D engineering objects. This subject very important as to prepare students for future usage of the softwares in any engineering fields involving design and simulations.

This subject covers the basic concepts of microbial growth phases and growth kinetic, selection and operating factors of bioreactor. This subject also emphasizes on the application of transport phenomena in bioreactor, sterilization methods, scale up, control system and instrumentation.

This course aims to provide hands on experience on separation units for biological products.The experiments cover the upstream and downstream of bioprocess. The students will be exposed to the preliminary works in bioprocess which are inoculum preparation, bioreactor setup and operation, and shake flask fermentation. Subsequently, first separation phase is introduced which covers centrifugation - bench-top for liquid recovery and disk stack for solidrecovery, and microfiltration. The obtained liquid product is then concentrated using cross-flow filtration. For the recovery of intracellular products, homogenization process is introduced. The second separation phase (isolation) is also included which is size exclusion chromatography.

This course is designed to introduce the unit operations that commonly employed to separate biological products. An idealized process of bioseparation consists of four phases which are the removal of insoluble products, the isolation of desired biological products or concentration, the purification and lastly, polishing of biological products. The basic methodsthat will be covered in this course include filtration, centrifugation, cell disruption, precipitation, extraction, adsorption, chromatography, crystallization and drying. In addition, an overview on the complete train of bioseparation will also be introduced.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BKC3363

BKC3492

BKC3533

Code

SCIENCE & ENGINEERING MATERIALS

UNIT OPERATION 2

OSH IN CHEMICAL INDUSTRIES

Course Name

01

01

01

02

02

02

03

03

03

01

01

02

02

03

03

01

01

01

02

02

02

Sec

MON

MON

TUE

TUE

TUE

THU

TUE

TUE

WED

FRI

FRI

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

WED

Day

11:00-11:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

08:00-08:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

Time

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

0

0

0

60

60

60

60

0

0

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BKF3463

BKF3463

BKF3463

BKF3463

BKF3463

BKF3463


This course is designed to provide a working knowledge in the solving of materials problemsencountered by chemical engineers and in the engineering of new and improved materials used in chemical processes. The approach used is the correlation of engineering properties with atomic and microstructures, utilizing the analysis techniques of materials characterization and phase relationships. Topics include structure and properties of metallic and nonmetallic materials of construction; interrelations between chemical bonding, structure, and behaviour of materials, corrosion resistant materials, polymers and composites as construction materials, particularly for sustainable environment. Each of the materials classes (metals, ceramics, polymer and composites) is discussed in detail in this context.

This subject will introduce the conceptand fundamental principles of unit operation in chemical engineering which include the drying process of materials, gas-liquid separation, vapor-liquid separation, liquid-liquid and solid-liquid separation, membrane separation and mechanical-physical separatiom process.

This subject is primarily to expose students with the fundamental concepts, practical aspectsand applications of occupational safety, health (OSH) in chemical industries. Among others, the students will be taught the fundamental application and day-to-day aspects of OSH and at the same time, the management aspects of it. Local and international regulations of SH&E such as OSHA and FMA will also be covered. Case studies from several chemical industries globally will also be included.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BKC3761

BKC3863

Code

CHEMICAL PLANT UTILITIES LAB

ADVANCED PROCESS CONTROL (E)

Course Name

01

01

01

02

02

02

01

01

01

Sec

WED

WED

WED

MON

MON

MON

WED

WED

THU

Day

10:00-10:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

FTA08L

FTA08L

FTA08L

FTA08L

FTA08L

FTA08L

V-BK-05

V-BK-05

V-BK-05

Loc

B

B

B

B

B

B

L

L

L

Mode

0

0

0

0

0

0

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

Y

Y

Y


This laboratory course is designed to introduce the basic utilities system employed in chemical related plants. Among the utilities systems cover are deionized (D.I) water system, cooling tower system, compressors, boiler system, pumps, industrial valves, waste water treatment plant, piping system and electrical system. In each of the module, students will be introduced to the basic concept of the theory, operations, industrial applications, maintenance procedure and scheduling, equipment safety. Students also will be emphasized on the basic design parameters in certain utilities systems and exposed to the existing utilities available in the laboratory. By completing this module, students will be able to elaborate, theorize and identify the utilities system that commonly employed in chemical industry.

CHAPTER 1 - DIGITAL SAMPLING AND z-TRANSFORMS

Components of Digital computer, sampling and signal reconstruction, z-Transforms for computer process control, Develop discrete time models from continuous time models

CHAPTER 2 - MULTILOOP AND MULTIVARIABLE CONTROL

Process ineractions and control loop interactions, Pairing of controlled and manipulated variables, Relative Gain Array method, Singular Value Analysis, Tuning of multiloop PID control system, Decoupling control

CHAPTER 3 - REAL TIME OPTIMIZATION

Basic requirements in real-time optimization, Formulation and solution of RTO problems, Unconstrained and constrained optimization, Linear Programming, Nonlinear and quadratic programming

CHAPTER 4 - MODEL PREDICTIVE CONTROL

Overview of Model Predictive Control (MPC), Predictions of SISO models, Predictions of MIMO models, MPC calculations, set-point calculations, Design and tuning of parameters, Implementation of MPC

CHAPTER 5 - DISTRIBUTED CONTROL SYSTEM

Overview of DCS,



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BKF1332

BKF2422

BKF2432

Code

ELECTRICAL & INSTRUMENTATION TECHNOLOGY

HEAT TRANSFER

MASS TRANSFER

Course Name

01

01

02

02

03

03

01

01

02

02

03

03

01

01

02

02

03

03

Sec

MON

MON

WED

WED

FRI

FRI

MON

MON

WED

WED

FRI

FRI

MON

THU

TUE

FRI

THU

FRI

Day

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

09:00-09:50

10:00-10:50

17:00-17:50

16:00-16:50

Time

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-03

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-04

W-DK-06

W-DK-04

W-DK-04

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This is an introductory level course of electrical principles for chemical engineering students.As far as this matter is concerned, instrumentation technology is identified to be one of the main areas which strongly related to the chemical engineering domain, particularly in designing a control system application. Thus, the course has been divided into two main parts which are fundamentals of electrical principles and essentials of instrumentation applications. Regarding electrical principles, the topics consist of introduction to electrical principles, DC electricity, AC electricity, AC power analysis, multiphase system and transformer. Meanwhile, topics on instrumentation include introduction to process instrumentation elements, data communications and instrumentation devices.

The objective of this course is to provide students with the concepts of heat transfer. This course will emphasize on the principles of the heat transfer in steady state by conduction, convection and radiation. The students will be exposed to the procedure for general problemsolving and its application on heat exchanger. Subsequently, the principles of unsteady-stateconvective heat transfer will be covered at the end of the course.

This course is to provide students with the concepts of mass transfer. This course will emphasize on the principles of the mass transfer in gases, liquids, biological solutions and gels, and solids. Subsequently, the principles of unsteady state and convective mass transfer will be covered to establish knowledge of mass transfer. The students will be exposed to the procedure for general problem solving and its application on real system.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BKF2443

BKF2453

Code

NUMERICAL METHODS & OPTIMIZATION

CHEMICAL REACTION ENGINEERING I

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

01

01

01

02

02

02

03

03

03

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

TUE

TUE

THU

THU

WED

WED

THU

THU

THU

FRI

MON

MON

TUE

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

11:00-11:50

12:00-12:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

Time

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-01

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413BKF2343BKF2413


This subject teaches the techniques by which mathematical problems are formulated so thatthey can besolved with arithmetic operations. The course is divided into several chapters starting from the basicsuntil problem solving in engineering applications. Matlab software will be introduced to empowerstudents in developing simple and well-structured programs.

This subject covers the knowledge of the reaction kinetics and reactor design which distinguishes chemical engineer from other engineers. The course introduces the basic design calculation and design of commercial chemical reactors, emphasizing synthesis of chemical kinetics and transport phenomena. The topics cover in this subject are kinetic rate theory, homogeneous reaction in batch and continuous systems, heterogeneous reaction and catalysis, temperature effect, effect of heat transfer and catalytic reactor also reactor design, sizing and modeling performance.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

Year

BKF3413

Code

PROCESS CONTROL & DYNAMIC

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

THU

THU

FRI

FRI

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

Time

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453


CHAPTER 1 INTRODUCTION TO PROCESS CONTROL

Importance of process control in CPI. Elements of control systems. Types of control problems. Guidelines to selelct controlled and manipulated variables.

CHAPTER 2 MATHEMATICAL MODELING OF CHEMICAL PROCESSES

Develop mathematical model for chemical processes, Linearization, Laplace Transforms, Degress of freedom Analysis, Transfer function models, Dynamic behavior of first-order, second-order and higher ordre systems

CHAPTER 3 FEEDBACK CONTROLLERS

Basic control modes, Transfer function models for P, I and D. Response of different control modes, Tuning of PID controllers using Direct Sysnthesis (DS) method, Internal Model Control (IMC) method, ITAE, Conhen-Coon and Ziegler-Nicholous ontroller settings.

CHAPTER 4 STABILITY OF CLOSED-LOOP CONTROL SYSTEM

Block diagram development, closed-loop transfer functions for set-point and load changes, Stability of closed-loop systems, Routh Stability Criterion, Frequency Response analysis, Bode plot



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BKF3463

BKF3472

BKF3553

Code

UNIT OPERATION I

CHEMICAL REACTION ENGINEERING II

PROCESS SIMULATION & COMPUTER AIDED DESIGN

Course Name

01

01

01

02

02

02

03

03

03

01

01

02

02

03

03

01

01

01

02

02

02

03

03

03

04

04

04

Sec

MON

MON

TUE

TUE

TUE

WED

MON

MON

THU

FRI

FRI

TUE

TUE

THU

THU

MON

MON

MON

TUE

TUE

TUE

THU

THU

THU

MON

MON

MON

Day

08:00-08:50

09:00-09:50

08:00-08:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-06

W-DK-05

W-DK-05

W-DK-06

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

W-DK-05

FTA16L

FTA16L

FTA16L

FTA17L

FTA17L

FTA17L

FTA17L

FTA17L

FTA17L

FTA16L

FTA16L

FTA16L

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BKF2343

BKF2343

BKF2343

BKF2343

BKF2343

BKF2343

BKF2343

BKF2343

BKF2343

BKF2453

BKF2453

BKF2453

BKF2453

BKF2453

BKF2453


The objective of this course is to provide students with concepts of separation processes in unit operation. This subject will emphasize in various unit operations, namely evaporation, distillation, absorption and extraction. By completing the subject, students will understand the basic mechanisms of the unit operations in chemical engineering fields.

This subject furthers the knowledge of chemical reactor. Topics to be covered are the heterogeneous systems of the catalytic reaction, including the effects which significantly influence the reactor performance, the study of the real scenario for nonideal reactors in industries, and introduction of biochemical reaction systems. The analysis of industrial chemical reactors frequently requires solution of non-linear algebraic and differential equations. Hence, modeling the nonideal reactor will be the crucial skill to fulfill the outcome requirement for each chemical engineer and researcher in chemical reaction engineering.

-



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BKF3721

BKF3731

Code

MASS & HEAT TRANSFER LAB

UNIT OPERATION LAB

Course Name

01

01

01

02

02

02

03

03

03

04

04

04

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

Sec

MON

MON

MON

WED

WED

WED

FRI

FRI

FRI

TUE

TUE

TUE

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

THU

THU

THU

THU

THU

THU

Day

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

FTA05L

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This laboratory course is offered to enhance their understanding through experiments to observe the application of theories learn in Unit Operation, Mass Transfer and Heat Transfer. Numbers of unit operation experiments have been designed such as shell and tube heat exchanger, plate heat exchanger, tray dryer, spray dryer, crystallizer, mass transfer coefficient apparatus, fixed and fluidized bed apparatus, and also climbing film evaporator. In this lab, student will be given a main objective of each experiment and instructor will explain about the Work Instruction to run the experimental. Then, by working intheir group student will run the experiment under supervision of the instructor. This will encourage student to be more creative and inculcate the critical thinking among the group member. Besides that, students will be exposed to industrial environment and safety precaution.

-



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BKF3741

BKG3413

BKG3433

Code

CHEMICAL REACTION ENGINEERING LAB

COMBUSTION & GAS UTILIZATION

GAS TRANSMISSION & DISTRIBUTION

Course Name

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

01

01

01

01

01

01

Sec

MON

MON

MON

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

FRI

FRI

FRI

THU

THU

FRI

TUE

TUE

THU

Day

08:00-08:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

15:00-15:50

Time

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

FTA04L

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

29

29

29

10

10

10

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y


This laboratory course is to strengthen their understanding through experiments by observing the application of theories learnt in chemical reaction engineering subject. Numbers of reaction in various reactors are to facilitate student to gain the objective of each experiment whereby the procedure will be instructed to run the experiment. Every 5-studentsgroup will run the experiment under supervision of the instructor. This will encourage studentto be more creative and inculcate the critical thinking among the group member. Besides that, students will be exposed to industrial environment and safety precaution.

This course enables students to understand the concept of combustion, fuel properties & characteristics, explosion phenomena and other related terms. The course also cover the application of mass & energy balance calculation related to combustion products and other important requirement i.e. theoretical air ratio, flue gases etc. Students will be exposed to the burner conversion calculation & design which is applicable in industry application. Venting systems option was also being discussed base on the appropriate circumstances. The gas fuel utilization methods and system was introduced base on current scenario application.

This course aims to provide fundamentals knowledge to design piping systems for gas transmission and distribution. These include gas pipeline design, engineering, fabrication, installation, testing and commissioning, as well as the gas pipeline network analysis. Students will be also be exposed on the requirements for installation, codes and standards use in the design and installation of gas systems. Other relevant topics such as welding, corrosion control, odoriser system and gas metering skids will also be introduced.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

4

Year

BKG3453

BKG3473

BKG3493

BKG3741

BKB3513

Code

GAS PROCESSING & LIQUEFACTION

GAS PROCESSING & UTILIZATION

GAS SYSTEM MATERIALS & COMPONENTS (E)

FUEL & COMBUSTION LAB

ENVIRONMENTAL BIOTECHNOLOGY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

01

01

01

Sec

MON

MON

TUE

WED

WED

FRI

MON

MON

THU

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

WED

Day

11:00-11:50

12:00-12:50

12:00-12:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

11:00-11:50

Time

W-DK-06

W-DK-06

W-DK-06

W-DK-05

W-DK-05

V-BK-04

V-BK-05

V-BK-05

W-DK-07

FTA07L

FTA07L

FTA07L

FTA07L

FTA07L

FTA07L

W-DK-02

W-DK-02

W-DK-02

Loc

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

L

L

L

Mode

10

10

10

30

30

30

30

30

30

28

28

28

0

0

0

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Y

Y

Y


This course mainly presents the treatment processes involved in transforming raw hydrocarbon gas produced from offshore fields into several valuable products. Such processes that include hydrocarbon gas processing, conditioning and liquefaction are vital inmeeting the pipeline specifications and the user requirements. Besides being utilized as a source of energy, the treated hydrocarbon gas, specifically the natural gas will be used as a feedstock for petrochemicals processes that apply the principles of natural gas conversion. Both of the indirect-and-direct conversion processes are being discussed in details. Furthermore, the course also encompasses the common processes that commercially applied in the production of non-hydrocarbon gases.

-

This course is established to provide sound understanding of the design and material selection for oil and gas piping, storage systems and its components. Special focus is given to the main construction materials for these systems, specifically gas piping that include steel and polyethylene materials. The course also encompass type, design and sizing consideration, industrial application and installation, and possibilities of failure of gas systems components.

This subject is provided the experiment related to combustion and fuel. This laboratory including experiment on combustion, gas turbiine, flame propagation and study, refrigeration, calorimeter and also calibration of gas

This subject is designed to utilizes microorganisms to improve environmental quality. These improvement include of contaminated water and wastewater, clean up of industrial waste stream and solid waste, remediation of soil contamineted with hazardous and toxic chemicals. Environmental biotechnology is essential to society and truly important as a technical displine



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

4

Year

BKB3533

BKB3823

BKB3912

BKB4833

BKC3543

Code

OSH IN CHEMICAL & BIOTECHNOLOGY INDUSTRIES

CELL CULTURE TECHNOLOGY (E)

PROCESS & PLANT DESIGN I

PHARMACEUTICAL TECHNOLOGY (E)

ENVIRONMENTAL ENGINEERING

Course Name

01

01

01

01

01

01

03

03

01

01

01

01

01

01

02

02

02

Sec

TUE

TUE

WED

THU

THU

FRI

THU

THU

THU

THU

FRI

MON

MON

TUE

WED

WED

FRI

Day

14:00-14:50

15:00-15:50

14:00-14:50

10:00-10:50

11:00-11:50

09:00-09:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

11:00-11:50

15:00-15:50

16:00-16:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

V-BK-04

V-BK-04

V-BK-04

W-DK-07

W-DK-07

W-DK-07

W-DKU-K-01

W-DKU-K-01

V-BK-05

V-BK-05

V-BK-05

W-DK-07

W-DK-07

W-DK-03

W-DK-07

W-DK-07

W-DK-07

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

62

62

3

3

3

59

59

59

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BKF3463BKF2453BKF3463BKF2453


This course is primarily to expose students with the fundamental concepts, practical aspectsand applications of occupational safety and health (OSH) in chemical industries. Among others, the students will be taught the fundamental application and day-to-day aspects of OSH and at the same time, the management aspects of it. Local and international regulations of SH&E such as OSHA and FMA will also be covered. Case studies from several chemical industries globally will also be included.

-

In this subject, students will be exposed to the chemical plant design principles. This subject will emphasize on process and plant design strategy, and practical design consideration approach. The students will be exposed to general design consideration such as safety, health and environmental issues, plant location, layout, operation and control. In addition, total plant mass balance and energy balance will be reviewed and then, the synthesis, development, evaluation and selection will be covered. Heat integration approach will be introduced and then, usage or application of software in design will be covered. At the end ofthis subject, students are expected to complete a mass and energy balance for a selected plant assigned to their respective group. A preliminary plant design report will be prepared by the group and oral presentation session will be held.

-

This subject is designed to introduce to the students the principles of environmental engineering. Topics includes introduction of environmental engineering, water and wastewater quality management, water and wastewater treatment, air pollution, and solid waste and hazardous waste management.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

Year

BKC3653

BKC3683

BKC3771

Code

MEMBRANE TECHNOLOGY (E)

WASTEWATER TREATMENT (E)

ENVIRONMENTAL ENGINEERING LAB

Course Name

01

01

01

02

02

02

01

01

01

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

Sec

MON

MON

TUE

MON

MON

TUE

MON

WED

WED

FRI

FRI

FRI

THU

THU

THU

WED

WED

WED

TUE

TUE

TUE

MON

MON

MON

MON

MON

MON

Day

16:00-16:50

17:00-17:50

16:00-16:50

09:00-09:50

10:00-10:50

09:00-09:50

15:00-15:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

Time

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

FTA15L

Loc

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

0

0

0

30

30

30

0

0

0

30

30

30

30

30

30

30

30

30

0

30

0

30

0

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-

-

This course will focus on various wastewater treatment plants, environmental testing techniques, common laboratory protocols, data analysis and reporting. Topics will be covered the analysis of water and wastewater using atomic absorption spectrophotometer,



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

Year

BKC3813

BKC3833

BKC3853

BKC3912

Code

OPERATION & PROJECT MANAGEMENT (E)

RECYCLING TECHNOLOGY (E)

PROCESS MONITORING (E)


Course Name

01

01

01

02

02

02

01

01

01

01

01

01

02

02

02

01

01

02

02

Sec

MON

MON

TUE

WED

FRI

FRI

THU

THU

FRI

THU

THU

FRI

MON

MON

WED

MON

MON

MON

MON

Day

14:00-14:50

15:00-15:50

12:00-12:50

11:00-11:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

Time

W-DK-06

W-DK-06

W-DK-02

W-DK-06

W-DK-06

W-DK-06

V-BK-04

V-BK-04

V-BK-04

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

W-DKU-K-01

W-DKU-K-01

W-DK-07

W-DK-07

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

0

0

0

30

30

30

0

0

0

0

0

0

152

152

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

Exam

BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453BKF3463BKF2453


-

-

This is an introductory level course in process monitoring. The students will be also exposedto the current issues in implementing process monitoring system for various industrial applications. The topics covered are introduction to process monitoring, statistical process control, multivariate statistical process monitoring, analytical-based methods, knowledge-based methods and industrial monitoring review.




13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

Year

BKC4653

BKC4683

BKC4693

BKF4143

Code

POLYMER TECHNOLOGY (E)

FOOD ENGINEERING (E)

CORROSION ENGINEERING (E)

PROCESS ENGINEERING ECONOMICS

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

03

03

03

Sec

TUE

TUE

WED

THU

THU

FRI

WED

WED

FRI

MON

MON

TUE

TUE

TUE

WED

MON

TUE

TUE

Day

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

11:00-11:50

11:00-11:50

12:00-12:50

10:00-10:50

08:00-08:50

09:00-09:50

08:00-08:50

10:00-10:50

11:00-11:50

10:00-10:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

W-DK-07

W-DK-07

W-DK-03

W-DK-07

W-DK-07

W-DK-07

W-DK-07

W-DK-07

W-DK-07

W-DK-02

W-DK-07

W-DK-07

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

4

4

4

60

60

60

60

60

60

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course will provide in depth knowledge of polymer science and technology. It will emphasize on classification of polymers, molecular weight and molecular weight distribution,polymerization techniques, concepts of polymer solubility, concepts of amorphous and crystalline structures, commercial plastics and rubbers, and overview of polymer processing,rubber technology, polymer composites. Upon completing this course, students will be able to explain what are the polymers, how they can be produced. The students should also be able to explain how polymers are processed into end-products and can suggest specific applications for specific polymers.

-

This is an introductory course on Corrosion Engineering with emphasis on the electrochemistry and kinetics of corrosion. The areas covered in this course are, namely, measurements and testing of corrosion, standard practices in corrosion prevention and inhibition, choices of materials and their environments, atmospheric corrosion, and metals oxidation. This course will provide students with general knowledge on corrosion mechanismand methods and ways of combating corrosion.

-



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

Year

BKF4791

BKG3412

BKG3443

Code

PROCESS CONTROL & INSTRUMENTATION LAB

OIL & GAS PRODUCTION SYSTEM

SAFETY ASPECTS, ACTS, CODES & STANDARDS

Course Name

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

01

01

01

01

01

Sec

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

FRI

FRI

FRI

THU

THU

THU

WED

WED

MON

MON

TUE

Day

14:00-14:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

12:00-12:50

Time

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

FTA03L

V-BK-04

V-BK-04

V-BK-04

V-BK-04

V-BK-04

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

10

10

10

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y


This laboratory have been developed to address the key engineering educational challenge of realistic problem solving within the contraints of a typical lecture-style course in process dynamics and control. Students will conduct experiments based on two major process operation which is based on computer simulation and plant experimental works. In computersimulation, students will simulate a case study using Matlab environment software and also operate a system on Distributed Control System (DCS). While the students also run the experiment using pilot plant available in this laboratory. This application will encourage students to apply their process control theories into practical term andinculcate the critical thinking among the group members.

-

This course addresses the safety aspects of the working environments, in particular, the oil and gas industry. One of the course objective is to ensure work compliance to existing laws and regulations in the oil and gas activities, which include transport, storage and handling of gas and other petroleum products. The course also provides working knowledge of the relevant standards and codes of practice to ensure safe design, construction and utilization of oil and gas systems and faclities. Case studies are presented and discussed to highlights lessons learnt.



13-AUG-12 03:11 PM

FKKSA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

Year

BKG3912

BKG4423

BKG4463

BKG4721

BKB4813

BKC3883

Code


OSH IN OIL & GAS INDUSTRIES

GAS STORAGE & RETICULATION (E)

GAS SYSTEM LAB

BIOPROCESS DEVELOPMENT (E)

HEAT INTERGRATION & OPTIMIZATION (E)

Course Name

02

02

01

01

01

01

01

01

01A

01A

01A

01

01

01

01

01

01

Sec

TUE

TUE

TUE

TUE

THU

MON

MON

TUE

THU

THU

THU

TUE

TUE

THU

TUE

TUE

WED

Day

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

14:00-14:50

16:00-16:50

17:00-17:50

16:00-16:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

14:00-14:50

Time

W-DKU-K-01

W-DKU-K-01

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

V-BK-05

FTA07L

FTA07L

FTA07L

V-BK-07

V-BK-07

V-BK-06

V-BK-05

V-BK-05

V-BK-05

Loc

L

L

L

L

L

L

L

L

B

B

B

L

L

L

L

L

L

Mode

57

57

30

30

30

29

29

29

10

10

10

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

Y

Y

Y

Y

Y

Y

N

N

N

Y

Y

Y

Y

Y

Y

Exam

BKF3463BKF2453BKF3463BKF2453



-

This subject aims to enable students to identify the various of storing methods of liquefied petroleum gases (LPG), natural gases (NG) and Liquefied natural gases (LNG). Besides that the understanding of gas reticulating system is provided. Students will be provided with a working knowledge to design the gas storage and reticulating systems. The topics of corrosion system , corrosion control as well as the corrosion protection system will aslo be covered.

Gas system lab provides the facilities for experiments related to gas transmission system and their control system. Basically, the content of this lab are divided to three sections whichis gas piping jointing, corrosion control system and gas piping testing and inspection. Student will be given a main objective of each experiment and instructor will explain about the standard operating procedure to run the experimental. By working in their group student will run the experiment under supervision of the instructor. It will help student improve their teamwork spirit.

-

-



13-AUG-12 03:11 PM

FKKSA

Faculty

NO TIMETABLE

Campus

DEGREE

Level

4

4

4

4

4

4

Year

BKB3922

BKB4934

BKB4944

BKC3843

BKC3873

BKC3922

Code

UNDERGRADUATE RESEARCH PROJECT I

PROCESS & PLANT DESIGN II

UNDERGRADUATE RESEARCH PROJECT II

ADVANCED REACTION ENGINEERING CATALYSIS (E)

MIXING OF FLUIDS & PARTICLES (E)


Course Name

03

03

03

01

01

01


30

1

60

3

0

75

Cap

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

Y

Y

N

Exam

BKF3463

BKB3912

BKB3922

BKF3463


This course is designed to expose the students to a research project. They have to apply all the knowledge they have learned in the programme to complete the research project. Each student will be supervised by at least one lecturer or two lecturers (main supervisor and co-supervisor). During the research project I, the students will be able to do a literature survey and prepare a draft which contains objective of the project, problem statement, literature survey, solving techniques, methodology, expected result, treatment of results and list of reference publications. At the end of this subject, the students are required to present the draft in a short seminar which will be evaluated by a faculty¿s panel.

In this subject, students will carry out a plant design project to demonstrate the practical aspects in designing chemical process and plant. The students will be divided into groups where they are expected to design a chemical process plant. They will also apply their previously obtained knowledge from Process and Plant Design I, in carrying out the design. Students will be assessed periodically based on their presentations and reports.

This subject is the continuation of the subject Research Project I. In this subject, the students are required to conduct the research, collect and analyze data, discuss the findingsand form the conclusions. At the end of this semester, the students are required to produce a research project report and present it to faculty¿s evaluation panel

This subject furthers the knowledge of Catalytic chemical reactor. Topics to be covered are the heterogeneous systems of the catalytic reaction, including the effects which significantly influence the reactor performance, the study of the real scenario for catalytic reactors in industries and introduction of biochemical reaction systems. The analysis of industrial chemical reactors frequently requires solution of non-linear algebraic and differential equations. Hence, modeling the industrial reactor will be the crucial skill to fulfill the outcomerequirement for each chemical engineer and researcher in chemical reaction engineering.

This subject covers the basic concepts of mixing such as power consumption, flow patterns and blending in single phase systems, mixedness of fluid and particulate mixtures, gas-liquiddispersion and mass transfer, liquid-liquid dispersion with applications in emulsion formation,solids suspension and distribution in agitated flows and non-Newtonian flow effects. The subject also emphasizes on CFD modelling of stirred tank reactor, mixing effects on product structure and selection of mixers for multi-purpose batch operations.




13-AUG-12 03:11 PM

FKKSA

Faculty

NO TIMETABLE

Campus

DEGREE

Level

4

4

4

4

4

Year

BKC4934

BKC4944

BKG3922

BKG4934

BKG4944

Code






Course Name

01

01

02

02

02


5

150

30

1

60

Cap

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

Exam

BKC3912

BKC3922

BKF3463

BKG3912

BKG3922









Faculty : FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES

13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BAA1112

Code

ENGINEERING DRAWING

Course Name

01B

01B

01B

01B

02C

02C

02C

02C

03A

03A

03A

03A

04D

04D

04D

04D

05B

05B

05B

05B

06C

06C

06C

06C

07A

07A

07A

07A

08D

08D

08D

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

THU

THU

MON

MON

WED

WED

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

15:00-15:50

Time

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11A

FKASA11A

FKASA11A

FKASA11A

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11A

FKASA11A

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11A

FKASA11A

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11B

FKASA11A

FKASA11A

FKASA11A

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This subject aims to expose the students to the civil engineering drawing. Students should be able to describe, discuss and analyse the information and conventions as presented in the civil engineering drawings. The learning approach of civil engineering drawings is integrated through series of hands-on tutorial. The students should be able to draw engineering drawings through selected exercises manually and generate engineering drawings using the application of software packages such as autocad and autodesk revit.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

Year

BAA1112

BAA1113

BAA1133

BAA1312

Code

ENGINEERING DRAWING

ENGINEERING MECHANICS

MECHANICS OF MATERIALS

CIVIL ENGINEERING MATERIALS

Course Name

08D

01A

01A

01A

02B

02B

02B

03C

03C

03C

04D

04D

04D

01

01

01

01A

01A

02B

02B

Sec

FRI

WED

FRI

FRI

MON

MON

WED

MON

MON

THU

TUE

TUE

THU

TUE

THU

THU

FRI

FRI

TUE

TUE

Day

16:00-16:50

12:00-12:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

10:00-10:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

Time

FKASA11A

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DK-17

W-DK-17

W-DK-08

W-DK-08

Loc

B

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA1113

BAA1113

BAA1113


The subject in Engineering Mechanics is the fundamental of all courses in engineering, which requires students to have basic knowledge in both statics and dynamics. The emphasis is on the development and correct application of the fundamental concepts of rigidbody mechanics. Topics covered for both statics & dynamics are force system resultants, condition of equilibrium, centroid & moment of inertia; force & acceleration and work & energy.

The aims of this course are the study of the behavior of engineering or structural elements subjected to loads. It is provides an introduction on elastic stress and strain analysis and axial deformations. Thus, properties and behavior of engineering materials including stress-strain relations. This course also deals with the analysis of direct and torsional shear stresses and their deformation; shear force and bending moment of beam also the stresses in beams; transformations of stresses.

This subject is compulsory and basic subject which will introduce students to the materials that been used in construction industry. Students will be exposed to the knowledge on the basic characteristic of each material together with the testing method to determine the material strength. Student who is able to complete this course sucessfully, would be able to understand easily the terms and materials related to construction project.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

Year

BAA1322

BAA1323

BAA1912

BAA1931

Code

CONSTRUCTION ENGINEERING

ENGINEERING SURVEYING

ENGINEERING SURVEYING FIELDWORK

ENGINEERING LABORATORY I

Course Name

01D

01D

02C

02C

01

01

01

01

01

01

01

01

01

02

02

Sec

THU

THU

FRI

FRI

WED

WED

FRI

MON

MON

MON

MON

FRI

FRI

MON

MON

Day

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

Time

W-DK-08

W-DK-08

W-DK-08

W-DK-08

W-DKU-K-01

W-DKU-K-01

W-DKU-K-01

FKASA5

FKASA5

FKASA5

FKASA5

FKASA1

FKASA1

FKASA1

FKASA1

Loc

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

Mode

60

60

60

60

30

30

30

30

30

30

30

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N


This compulsory and basic subject will introduce the students to the world of construction industry. As an introduction, students are given information on the current situations in construction industries including the main person in-charge and their role in the project. The students will be taught the fundamental knowledge on elements involved in construction work process that would lead towards completion of strong and stable structure at the end ofproject. Students who are successfully complete this course will be equipped with basic and fundamental knowledge that a civil engineer should have.

This subject will expose to the civil engineering students the role of survey engineering in their field. The subject topics encompasses introduction to the engineering surveying, surveying equipment, measurement unit, bearing/angle and distance measurement for horizontal control, coordinate system, area & volume calculation, mass transfer diagram & mass transfer measure and the final setting out for construction work.

This fieldwork emphasizes on handling of survey equipments, carry out linear survey, traverse survey, leveling, establishing temporary bench mark, detail survey, techniques of gathering the locating man-made and natural features, preparation of site plan, related computation, and setting-out simple construction work.

These laboratory works covers concrete laboratory and light structure laboratory. Some of the experiments to be conducted during laboratory sessions include concrete mix design,sieve analysus, Vicat, cube test, flexural test, slump test and compaction factor test, Tenile Test, Triangle of Force, Shear and Bending Moment, Bending of Beams and Coefficient of Elasticity,and Reaction of Continuous Beam, Penetration Test, ring nad Ball Test and Moisture Content of Aggregate.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

1

2

Year

BAA2012

BAA2113

Code

COMPUTER PROGRAMMING

THEORY OF STRUCTURES

Course Name

01

01A

01A

01B

01B

02

02A

02A

02B

02B

01

01

01

02

02

02

03

03

03

04

04

04

Sec

MON

THU

THU

FRI

FRI

MON

THU

THU

FRI

FRI

MON

MON

FRI

WED

WED

FRI

TUE

TUE

THU

MON

MON

THU

Day

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

12:00-12:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

14:00-14:50

16:00-16:50

17:00-17:50

17:00-17:50

Time

W-DK-09

FKASA11A

FKASA11A

FKASA11A

FKASA11A

W-DK-09

FKASA11A

FKASA11A

FKASA11B

FKASA11B

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

Loc

L

B

B

B

B

L

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

30

30

30

30

60

30

30

30

30

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133

BAA1133


The subject covers the basic principles of computer programming using C++, with applications in the engineering field. The topics in this course include Flowcharts and Pseudo Codes, programming with C++, variables and data types, input and output, calculation and relationship, selection, loops, function, arrays, string and writing from text files. Basic Worksheet manipulations for handling mathematical formulae and data handlingin statistics and graphical output.

In this course students will be introduced to the analysis of statically determinate and indeterminate structures. The course covers the fundamental concepts of determining the structural stability and determinacy, analysis of statically determinate beams and frames, trusses and arches. Also to determine the deflection and influence lines of beam and truss, and the analysis of indeterminate beams and frames



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

Year

BAA2123

BAA2213

BAA2413

Code

STRUCTURAL ANALYSIS

REINFORCED CONCRETE DESIGN I

HIGHWAY & TRAFFIC ENGINEERING

Course Name

01

01

01

01

01

01A

01A

02

02

02A

02A

03

03

03A

03A

04

04

04A

04A

01

01

01

02

02

02

Sec

TUE

TUE

THU

MON

MON

TUE

TUE

WED

WED

THU

THU

TUE

TUE

WED

WED

THU

THU

MON

MON

TUE

TUE

FRI

MON

WED

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

09:00-09:50

12:00-12:50

10:00-10:50

11:00-11:50

Time

W-DK-09

W-DK-09

W-DK-09

W-DK-11

W-DK-11

FKASA12

FKASA12

W-DK-11

W-DK-11

FKASA12

FKASA12

W-DK-11

W-DK-11

FKASA12

FKASA12

W-DK-11

W-DK-11

FKASA12

FKASA12

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

Loc

L

L

L

L

L

T

T

L

L

T

T

L

L

T

T

L

L

T

T

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113


Structure Analysis is the continuity studies of the Theory of Structures course that exposes the advanced analysis in the civil engineering structures and laboratory works. The course focuses on analyzing the column, statically indeterminate trusses, arches and cables and determines the displacement by using the Stiffness Matrix method for trusses, beams and frames. The principles and methods used to meet the objectives are drawn from prerequisitecourses in mechanics, physics and mathematics.

This course covers the introduction of reinforced concrete design, the limit state principles, ultimate strength analysis and flexural design. Shear, bond and torsion, analysis and design of beams and solid slab, staircases and introduction to axial column design. Using codes require for design and detailing. Group design project for double storey house.

This course is the combination of highway and traffic engineering where the students will be introduced to the following highway and traffic engineering concepts and attributes: various road users characteristics and speed-flow-density relationship, road geometric alignment study, raoad flexible pavement design, link and intersection performance analysis and planning traffic management system with traffic safety and public transport goals.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

Year

BAA2513

BAA2713

BAA2723

BAA2921

Code

SOIL MECHANICS & GEOLOGY

FLUIDS MECHANICS

HYDRAULICS

ENGINEERING LABORATORY II

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

03

03

03

04

04

04

01

01

01

01

01

02

02

Sec

THU

FRI

FRI

TUE

THU

THU

MON

WED

WED

TUE

TUE

FRI

MON

MON

THU

TUE

TUE

FRI

WED

WED

FRI

TUE

TUE

WED

WED

Day

16:00-16:50

15:00-15:50

16:00-16:50

12:00-12:50

11:00-11:50

12:00-12:50

08:00-08:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

17:00-17:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

Time

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-09

W-DK-10

W-DK-10

W-DK-08

FKASA1

FKASA1

FKASA1

FKASA1

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

Exam

BAA1113

BAA1113

BAA1113

BAA1113

BAA1113

BAA1113

BAA2713

BAA2713

BAA2713


This course provides an elementary introduction and the basic mechanics necessary for Geotechnical Engineering. This course aims to provide the basic understanding of the engineering geology, the soil origin and formation, basic soil engineering properties, the soil classification, the compaction of the soil, the effect of water in soil in term of permeability and seepage and also the stresses in the soil mass.

To introduce the fundamental principles of fluid mechanics, the basic equations governing fluid statics and fluid flow, and the methods of solving engineering problems related fluid mechanics.

This course introduces the concept and analysis of open channels (uniform & non-uniform flow). It covers the various phenomena such as hydraulic jump and backwater, specific energy concept application, design of water distribution system, analyses of hydraulics machinery principles and dimensional analysis & hydraulic similarity concepts.

This Engineering Lab II covers structural laboratory testing. The experiments are complimentary to the thery that students have learned in the classroom and also to expose them to the practices work at the construction industry.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

2

3

3

3

Year

BAA2941

BAA3012

BAA3023

BAA3213

Code

ENGINEERING LABORATORY III

LAW OF CONTRACT & ESTIMATION

PROJECT MANAGEMENT IN CONSTRUCTION

REINFORCED CONCRETE DESIGN II

Course Name

01

01

02

02

01

01

02

02

01

01

01

02

02

02

01

01

01A

01A

01B

01B

Sec

MON

MON

TUE

TUE

MON

MON

TUE

TUE

THU

FRI

FRI

THU

THU

FRI

MON

MON

WED

WED

WED

WED

Day

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

12:00-12:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

14:00-14:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

FKASA1

FKASA1

FKASA1

FKASA1

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

FKASA8

FKASA8

FKASA8

FKASA8

FKASA8

FKASA8

Loc

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

T

T

T

T

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA2213

BAA2213

BAA2213

BAA2213

BAA2213

BAA2213


-

The course covers topics of tendering, contract, condition of contract, contract administration / management, contract procurement, estimation, taking-off and the importance of information technology in estimation work

To introduce the concept of project management which will cover the life cycle of the projects, roles of project manager, type of project organization, resource management, techniques of planning and scheduling, monitoring and controlling and types of software for project planning and scheduling that have been practiced in construction industry.

This course covers the column design, foundation design, retaining wall design and introduction to prestressed concrete design and also typical design of a reinforced concrete building under the design project



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BAA3223

BAA3312

BAA3322

BAA3513

Code

STEEL & TIMBER DESIGN

BUILDING SERVICES & MAINTENANCE

ENGINEERING ECONOMICS

GEOTECHNICAL ENGINEERING

Course Name

01

01

01

02

02

02

01

01

02

02

01

01

02

02

01

01

01

02

02

02

Sec

TUE

TUE

THU

THU

THU

FRI

TUE

TUE

MON

MON

MON

MON

THU

THU

TUE

TUE

FRI

MON

WED

WED

Day

16:00-16:50

17:00-17:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

09:00-09:50

12:00-12:50

10:00-10:50

11:00-11:50

Time

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2113

BAA2513

BAA2513

BAA2513

BAA2513

BAA2513

BAA2513


this course covers introduction to the design code for designing beams, trusses, connections, tension members, compresion members and column. Timber design will also be covered.

This course will provide the fundamental knowledge of engineering design of the building services and maintenance in building through a specific design project

This subject covers the principles and applications of economic analysis in the field of engineering to make sound decision among alternatives.

Geotechnical Engineering provides students with further discussion and explanation related to soil engineering. The course describes: Soil compression, consolidation and settlement, Lateral pressure of soil, Slope stability, Bearing capacity of soil, Soil improvement and environment geotechnics.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BAA3613

BAA3713

BAA3921

BAA3922

Code

ENVIRONMENTAL ENGINEERING

HYDROLOGY & WATER RESOURCES

ENGINEERING LABORATORY IV

RESEARCH METHODOLOGY & PRE - PROJECT

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

01

01

02

02

01

02

Sec

MON

MON

FRI

THU

THU

FRI

MON

MON

FRI

THU

THU

FRI

WED

WED

THU

THU

FRI

WED

Day

16:00-16:50

17:00-17:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

16:00-16:50

17:00-17:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

17:00-17:50

12:00-12:50

Time

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-11

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

FKASA1

FKASA1

FKASA1

FKASA1

W-DKU-K-01

W-DKU-K-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

120

120

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Exam

BAA2713

BAA2713

BAA2713

BAA2713

BAA2713

BAA2713


Introduction to environmental engineering; physical, chemical and biological processes; water and wastewater treatment; air pollution; solid and hazardous waste; sewage treatmentand disposal and treatment plant design.

This course will be introduced the application of hydrological theory to solve problem in water resources engineering. The knowledge in hydrology will be used in planning, development, management and design of water resources project. This course also introduces the knowledge of reservoir management, engineering economy and determination of water demand requirement in water resources planning.

This ENGINEERING LAB IV covers Highway and Geotechnical laboratory testing. The experiments are complimentary to the theory that students have learned in the classroom and also to expose them to the practice work at the construction industry

Students are required to attend a research workshop at the beginning of the course, where they will be taught on how to do research; research methodology, conducting literature review, data sampling, collection, analysis, and interpretation. Students will be guided by their respective supervisors on how to plan for the research, which will be conducted later in PSM 2 course. Students will have to carryout weekly discussion with their supervisors on theresearch topic, objective, scope, research program, and the extent of the development of theresearch proposal. A report and a presentation of the research proposal are required at the end of the course.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

Year

BAA4023

BAA4222

BAA4233

Code

PROJECT FOR PROFESSIONAL PRACTICES

ENGINEERS IN SOCIETY

FINITE ELEMENT

Course Name

01

02

01

01

01

01

01

Sec

TUE

FRI

THU

THU

MON

MON

THU

Day

12:00-12:50

16:00-16:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

Time

W-DK-10

W-DK-10

W-DKU-K-01

W-DKU-K-01

FKASA8

FKASA8

FKASA8

Loc

L

L

L

L

L

L

L

Mode

60

60

120

120

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

Y

Y

Y

Y

Y


Project for Professional Practices is a group project at FKASA. Students are grouped into team and the group is pursuing a completed project planning and design of a civil engineering project. Based on the directions but minimal involvement of a Project Director assigned foe each group, the group plan and design the project until the completion of an acceptable project outputs i.e. Project Tender Reports. The aims of the course are to developed students' professionalism and ethical responsibilities skills, effective communication abilities with other multidisciplinary professions, effective team working skill, awareness about sustainable environment, desires for lifelong learning, utilization of moderns tools and technologies and techno-preneurship skills using technical knowledge that have been learned to date. Although it is PBL in nature, lectures and e-learning sessions are conducted as to provide general guidance to the groups.

Qualified engineers of tomorrow will need to be market conscious, commercially adept, enviromentally sensitive and responsive to needs of society. They must also be good communicators, organizers amd managers. Therefore, this course is designed to enrich the students and intended to introduce them to the professional practice of civil engineering, with emphasis on the roles of practicing engineers, professional practice organization, engineering ethics, professional registration and communication skills.

This course will cover three scopes which is technology in society, organization of engineering society and communication. The course features 13 guest speakers and all are civil engineering parcticioners and professional, providing the students an opportunity to interact with professionals in their major field og interest.

This course will enable students to understand the fundamental principles of finite element analysis in civil engineering structures. The finite element analysis use numerical method in solving structural engineering problems involving complicated geometries, loadings and material properties. The finite element formulation of the problem results in a system of simultaneous algebraic equations for solution. Basic concept of structural modelling finite element discretization, interpretations, review of the direct stiffness method are combined forobtain the solution in the framework of structure mechanics. This course also will introduce some of the computational modelling and analysis techniques for comprehensive evaluation and checking when interpreting results. It covers basic theory, modelling, meshing and analysis component models for stresses, deflections, treatment of boundary conditions and restrains, with example of good practice for safe and effective application in use.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

Year

BAA4243

BAA4253

BAA4313

BAA4513

Code

ADVANCED CONCRETE MATERIALS

BRIDGE ENGINEERING

GEOGRAPHICAL INFORMATION SYSTEM

FOUNDATION ENGINEERING

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

Sec

MON

MON

WED

THU

THU

FRI

TUE

TUE

THU

TUE

TUE

THU

MON

MON

THU

Day

10:00-10:50

11:00-11:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

12:00-12:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

FKASA8

FKASA8

FKASA6

W-DK-11

W-DK-11

W-DK-10

FKASA6

FKASA6

FKASA6

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

W-DK-10

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BAA3513

BAA3513

BAA3513

BAA3513

BAA3513

BAA3513


This course will introduce the students to the concepts, characterization, application and advantages of the recent concrete technology in construction as well as concrete durability in detail. The early part of the course will cover on the utilization of blended cement in concrete technology before introducing the student to the special concretes made using Portland cement and concrete produced not using Portland cement. The course will also touch on the durability aspect of concrete in terms of causes of deterioration, mechanism of attack as well as method to overcome the problem. Others topics that will also be included are quality control for durability of concrete and repairs of concrete structures.

This course covers on prestressed concrete bridge design, prestressing system, loss of prestress, analysis and design of section for flexural, shear and also principles and design ofprestressed concrete members for prestressed concrete bridge. The course also covers prestressed concrete one-way slab and two-ways slab design for prestressed concrete bridge.

"The goal of this course is to give knowledge and understanding about application of Geographical Information System (GIS) in Civil Engineering. The main content of this courseis about an application of GIS in civil engineering. Amongst the main topics discussed are;a) Fundamental and development of GIS in civil engineeringb) Data processing such as data collection, data management, spatial analysis, data manipulation and data output.c) Current application of GIS in civil engineering (focus in Malaysia)

"

This subject will introduce the students to aspect of foundation engineering design and analysis. The topics covered in the subject includes the review of site investigation report data, settlement of shallow foundation, soil improvement and ground modification method, all aspects of deep foundation including single pile and group piles and also earth retaining structure which involves braced cuts and sheet piles. At the end of this course, student should be able to practiced the knowledge gained and solved problems related to geotechnical engineering field.



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

4

Year

BAA4823

BAE4443

BAE4483

BAE4613

BAE4813

Code

FACILITIES & ASSET MANAGEMENT

WASTE MANAGEMENT

ADVANCED WATER AND WASTEWATER TREATMENT

ENVIRONMENTAL MANAGEMENT

ADVANCED HYDROLOGY & WATER RESOURCES

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

FRI

MON

MON

THU

TUE

TUE

THU

TUE

TUE

THU

TUE

TUE

FRI

Day

14:00-14:50

15:00-15:50

11:00-11:50

14:00-14:50

15:00-15:50

11:00-11:50

14:00-14:50

15:00-15:50

12:00-12:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

11:00-11:50

Time

W-DK-11

W-DK-11

W-DK-10

FKASA6

FKASA6

FKASA6

FKASA8

FKASA8

FKASA8

FKASA6

FKASA6

FKASA6

FKASA6

FKASA6

FKASA6

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The course provides the requisite knowledge for understanding facilities management as a profession with reference to how people, spaces, organisations, services, indoor and naturalenvironment interact within the property and construction industry in an environmentally sustainable fashion. Apart facilities the module also integrate with the nature and concepts of contemporary asset management. Asset management topic aspects as asset management systems, asset management plan, asset knowledge, the use of geographical information systems, delivery (plan, design, risk & value management, procure, construct), audit and review.

Waste management is the module focuses on solid waste and hazardous waste management. In this module student will be expose on the regulation, processes and designfor safe waste management begin from generation, storage, and transportation until disposalof solid and hazardous waste. It is important for student to learn and understand this subjectin order to develop clean and safe environment for human and health.

The aim of this course is to provide an overview of both the theoretical and practical aspectsof advanced water technology for surface water and wastewater treatments. Advanced wastewater treatment will be defined as any process designed to produce an effluent of higher quality than normally achieved by secondary treatment processes or containing unit operations not normally found in Secondary Treatment.

Environmental management of civil engineering is of increasing importance throughout the world, so demand is growing for qualified and trained environmental managers. This course is aimed at undergraduates who want a basic knowledge in environmental management.This subject covers various topic from water, air, noise and solid waste which contribute to pollution during constructions works. Rule and regulation from Department of Enviroment also will be addressed togather with enviroment impact assessement(EIA) before the construction works and environmental management planning (EMP) during constructions works. International standards and GIS application also will be highlighted with latest development, technologi and applications.

-



13-AUG-12 03:13 PM

FKASA

Faculty

GAMBANG

NO TIMETABLE

Campus

DEGREE

DEGREE

Level

3

4

4

4

Year

BAA4483

BAA4723

BAA4976

BAA4914

BAA4933

BAA4939

Code

ADVANCED WATER & WASTEWATER TREATMENT

APPLIED HYDRAULICS ENGINEERING

INDUSTRIAL TRAINING

FINAL YEAR PROJECT

INDUSTRIAL TRAINING REPORT

INDUSTRIAL TRAINING

Course Name

01

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

THU

TUE

THU

THU

Day

14:00-14:50

15:00-15:50

12:00-12:50

12:00-12:50

09:00-09:50

10:00-10:50

Time

FKASA8

FKASA8

FKASA8

W-DK-11

W-DK-09

W-DK-09

Loc

L

L

L

L

L

L

Mode

30

30

30

30

30

30

200

120

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

Exam

BAA3922


The aim of this course is to provide an overview of both the theoretical and practical aspectsof advanced water technology for surface water and wastewater treatments. Advanced wastewater treatment will be defined as any process designed to produce an effluent of higher quality than normally achieved by secondary treatment processes or containing unit operations not normally found in Secondary Treatment.

-

This course involves placement of students in relevant industry for approximate 10weeks duration to get real-world working experience. Every student will be assigned an advisor/lecturer from the faculty who will co-operate with the industrial counterpart. At the end of the industrial training, students need to submit report. In addition, the respective industrial counterpart need to evaluate and provide comments on the students performances.

After successfully completing Research Methodology and Pre-Project (BAA3922 ¿ PSM1), students will continue to proceed with the subsequent tasks of the proposed project program. They have to undertake data collection and conduct experiment or survey, tabulateand analyze the results, and conclude their project findings. They must constantly report andcarryout discussion with their supervisors on the extent of the development of their project. At the end of the course, students have to submit the final thesis and present their findings to the examiners

During industrial training the students should gain insightful information and knowledge related to industrial practice, visualize the job scope tasks and possibilities of their later occupation work. All students are required to undergo an industrial training for a certain period that has been agreed by the faculty and university. The performance of each student during the periods of his/her industrial training is evaluated by the faculty staffs, and the industrial supervisor. Students are required to submit report by end of the industrial period.

During industrial training the students should gain insightful information and knowledge related to industrial practice, visualize the job scope tasks and possibilities of their later occupation work. All students are required to undergo an industrial training for a certain period that has been agreed by the faculty and university. The performance of each student during the periods of his/her industrial training is evaluated by the faculty staffs, and the industrial supervisor.



Faculty : FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING

13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BEE1133

Code

CIRCUIT ANALYSIS I

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

MON

THU

TUE

TUE

TUE

TUE

MON

TUE

TUE

FRI

FRI

FRI

FRI

MON

MON

THU

WED

WED

WED

WED

Day

09:00-09:50

10:00-10:50

12:00-12:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

08:00-08:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

Time

E20BK1

E20BK1

E22BK5

E12F1

E12F1

E12F1

E12F1

E20BK2

E22BK5

E22BK5

E12F1

E12F1

E12F1

E12F1

E21BK3

E21BK3

E20BK1

E12F1

E12F1

E12F1

E12F1

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces the basic concepts and engineering methods of DC and AC circuit analysis. The contents include Ohm's Law, Kirchhoff's Law, series and parallel circuits, Mesh and Nodal analysis, Source Transformation Theorems, and responses of basic First Order circuits.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BEE1213

Code

DIGITAL ELECTRONICS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

MON

WED

THU

THU

THU

THU

THU

THU

FRI

MON

MON

MON

MON

WED

WED

FRI

THU

THU

THU

THU

Day

11:00-11:50

12:00-12:50

08:00-08:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

E20BK1

E20BK1

E21BK4

E12F3

E12F3

E12F3

E12F3

E21BK3

E21BK3

E22BK6

E12F3

E12F3

E12F3

E12F3

E00DK2

E00DK2

E21BK4

E12F3

E12F3

E12F3

E12F3

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course emphasizes on the fundamental of digital electronics. The student is first taught about the number system and logic gates before introducing them to digital IC technology. Then they are exposed to both combinational logic network and combinational MSI logic. In concurrence with this, the fundamental of sequential logic, flip-flop, counter and shift registerwill be taught. Finally, the memory devices are introduced.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BEE1222

Code


Course Name

01

01

01

01

02

02

02

02

03

03

03

03

Sec

MON

MON

WED

WED

TUE

TUE

FRI

FRI

WED

WED

FRI

FRI

Day

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

Time

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

E00H1

Loc

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff Exam Pre Requisite Remark

This course present the C programming language for electrical and electronics engineer. The contents emphasis not only on the theoritical knowledge of programming but also the practical impelementation in real-life situation. Students will learn basic structure of computer programming in C language. Students will also be exposed to method for basic hardware/software interfacing.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BEE1313

Code

INSTRUMENTATION & MEASUREMENTS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

MON

THU

TUE

TUE

TUE

TUE

TUE

TUE

THU

FRI

FRI

FRI

FRI

TUE

TUE

FRI

THU

THU

THU

THU

Day

09:00-09:50

10:00-10:50

12:00-12:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

08:00-08:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

09:00-09:50

10:00-10:50

08:00-08:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

E22BK5

E22BK5

E20BK2

E10F16

E10F16

E10F16

E10F16

E20BK1

E20BK1

E21BK3

E10F16

E10F16

E10F16

E10F16

E20BK2

E20BK2

E22BK6

E10F16

E10F16

E10F16

E10F16

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces students to the principles of instrumentation and measurements, determination of error that caused by the meters. The students will be exposed to the architecture and the operation of DC and AC meters, oscilloscope, signal generator, sensorsand transducers, analysis of DC and AC meters and introduction to signal conditioning



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

1

Year

BEE1931

BEE1941

Code

BASIC ELECTRONIC INSTRUMENTATION

ELECTRICAL WIRING

Course Name

01

01

02

02

03

03

04

04

05

05

06

06

07

07

01

01

02

02

03

03

04

04

Sec

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

WED

WED

MON

MON

TUE

TUE

TUE

TUE

WED

WED

Day

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

Time

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E12F1

E20F19

E20F19

E20F19

E20F19

E20F19

E20F19

E20F19

E20F19

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


Students will learn how to use power supply, function generator, digital multimeter, oscilloscope, analog digital trainer and IC tester. The students will learn on how to design a switching circuit and how to interface between electronics and electrical circuit.

This course introduces students to the single phase and three phase wiring and installation. The students will learn about supply system, rules and regulation, wiring system and electrical protection system. They are also will practice in applying trunking and conduits for electrical wiring as well as doing fitting and installation of electrical system devices. Then, they will conduct inspection and testing on their wiring and installation as safety conformation and fulfill the regulations.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

1

1

2

Year

BEE1951

BEE4632

BEE1143

Code

TECHNICAL DRAWING

MAINTENANCE TECHNOLOGY

CIRCUIT ANALYSIS II

Course Name

01

01

02

02

03

03

04

04

01

01

02

02

03

03

01

01

01

01A

01A

01B

01B

Sec

MON

MON

MON

MON

TUE

TUE

WED

WED

WED

WED

FRI

FRI

MON

MON

MON

TUE

TUE

FRI

FRI

FRI

FRI

Day

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

Time

E10F9

E10F9

E10F9

E10F9

E10F9

E10F9

E10F9

E10F9

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E22BK6

E22BK6

E22BK6

E12F1

E12F1

E12F1

E12F1

Loc

B

B

B

B

B

B

B

B

L

L

L

L

L

L

L

L

L

B

B

B

B

Mode

30

30

30

30

30

30

30

30

60

60

60

60

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Exam

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133


This course covers theoretical knowledge and practical-based on doing technical drawing byusing mainly AUTOCAD software. The software is focusing on the fundamental level of AUTOCAD skill until the plotting technique. The students will be guided and exposed to drawbasic technical drawing, electrical and electronic circuit diagrams as well as the geometrical drawing.

This course exposed the students to various maintenance strategies and technologies available for maintenance practices adoption. The course will introduce the students to the many skills required for the implementation of an effective maintenance program, including workplace environment simulation, i.e. interpersonal skills, desired work-culture, costs appreciation, workplace safety, workplace productivity, etc.

This course provides the basic concepts and engineering methods of DC and AC circuits. The contents include applications of Mesh and Nodal analysis, Superposition and Source Transformation theorems, Thevenin¿s and Norton¿s theorem. Resonant circuit, second order circuit and Balanced 3-phase circuits are also covered.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

2

2

Year

BEE2213

BEE2931

Code

ANALOG ELECTRONICS I

BASIC PROGRAMMABLE LOGIC CONTROLLER

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

01

01

02

02

03

03

04

04

Sec

TUE

FRI

FRI

MON

MON

MON

MON

TUE

TUE

FRI

THU

THU

THU

THU

MON

TUE

TUE

WED

WED

WED

WED

MON

MON

MON

MON

TUE

TUE

WED

WED

Day

08:00-08:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

10:00-10:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

Time

E00DK1

E20BK2

E20BK2

E12F2

E12F2

E12F2

E12F2

E00DK3

E00DK3

E20BK1

E12F2

E12F2

E12F2

E12F2

E22BK5

E20BK1

E20BK1

E12F2

E12F2

E12F2

E12F2

E10F15

E10F15

E10F15

E10F15

E10F15

E10F15

E10F15

E10F15

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

Exam

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133


This course introduces the fundamental of semiconductor devices which are diodes and transistors. It also describes BJT transistors operational charactreistics that covers the DC and AC analysis. In addition, the various type of BJT configuration will be examined and analyzed. Furthermore, the analysis of the amplifier circuit will be extended to its frequency response.

This course covers the fundamental of Programmable Logic Controller (PLC) included input and output component, memory address, wiring diagram, troubleshooting and design of a ladder diagram.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

2

2

Year

BEE2941

BEE3113

Code

BASIC ELECTROPNEUMATICS

ELECTROMAGNETIC FIELDS THEORY

Course Name

01

01

02

02

03

03

04

04

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

MON

MON

MON

TUE

TUE

WED

WED

MON

MON

WED

THU

THU

THU

THU

TUE

TUE

THU

MON

MON

MON

MON

WED

WED

THU

TUE

TUE

TUE

TUE

Day

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

08:00-08:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

12:00-12:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E12F17

E12F17

E12F17

E12F17

E12F17

E12F17

E12F17

E12F17

E22BK6

E22BK6

E20BK1

E11F5

E11F5

E11F5

E11F5

E21BK3

E21BK3

E20BK2

E11F5

E11F5

E11F5

E11F5

E20BK2

E20BK2

E22BK6

E11F5

E11F5

E11F5

E11F5

Loc

B

B

B

B

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

30

30

30

30

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This subject covers about pneumatic and electropneumatics system starting from energy supply, input elements, processing elements, control elements and working elements. The student also will learn how to used electropneumatic tools and design electropneumatic control system using relay, timer, counter and sensors.

This course introduces students on the importance and the applications of the Electromagnetic Fields Theory in the Electrical Engineering courses. The syllabus covered includes the concepts of electrostatic field, magnetostatic field and electromagnetic field (time varying field).



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

2

2

Year

BEE3413

BEE3931

Code

PRINCIPLES OF COMMUNICATION SYSTEMS

PC INTERFACING

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

02

02

03

03

04

04

05

05

06

06

07

07

08

08

Sec

WED

THU

THU

TUE

TUE

TUE

TUE

MON

FRI

FRI

THU

THU

THU

THU

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

WED

WED

WED

WED

Day

11:00-11:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

15:00-15:50

16:00-16:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

E22BK5

E20BK2

E20BK2

E11F11

E11F11

E11F11

E11F11

E20BK1

E20BK1

E20BK1

E11F11

E11F11

E11F11

E11F11

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

E11F8

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course introduces theories in the area of communication systems. Topics covered include the basic elements of communications, signal analysis, amplitude modulation, angle modulations and digital modulations, as well as transmission channels and noise impact on the modulation system. Finally, some emergence of digital communication technologies are presented and compared.

-



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

2

2

3

Year

BEE3941

BEE4641

BEE1611

Code

MICROCONTROLLER APPLICATIONS

ENGINEERS & SOCIETY

OCCUPATIONAL SAFETY & HEALTH

Course Name

01

01

02

02

03

03

04

04

05

05

06

06

07

07

08

08

01

01

02

02

01

01

02

02

Sec

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

WED

WED

WED

WED

TUE

TUE

WED

WED

WED

WED

THU

THU

Day

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

Time

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E11F10

E00DK2

E00DK2

E20BK1

E20BK1

E20BK2

E20BK2

E22BK6

E22BK6

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-

This course is to enable student to gain a deeper understanding of the ethical and laws issues and dilemmas that arise in one or more areas in professional conduct and their responsibility to society. It also intended to develop students to understand the academic responsibility and accountability of a profession in engineering and the organizational activities of professional engineering institutions.

The course aims to ensure worker safety and health by workingwith employers to create better working environments.Outreach, education and compliance assistance enable OSHA toplay a vital role in preventing on-the-job injuries and illnesses.At the end of this course, students will be able to establishsafety and health programs and identifying and correctingworkplace hazards.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BEE2123

Code

ELECTRICAL MACHINES

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

THU

THU

FRI

FRI

FRI

FRI

TUE

WED

WED

FRI

FRI

FRI

FRI

MON

MON

TUE

THU

THU

THU

THU

Day

16:00-16:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

08:00-08:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

11:00-11:50

12:00-12:50

14:00-14:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E20BT1

E20BT1

E20BT1

E10F14

E10F14

E10F14

E10F14

E20BK2

E21BK4

E21BK4

E10F14

E10F14

E10F14

E10F14

E22BK5

E22BK5

E20BK2

E10F14

E10F14

E10F14

E10F14

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces the fundamental concepts and principles of transformer and various types of electrical machines. It is intended for students to understand fundamental aspects of rotating electrical machines. The first part of the course is a quick review of some electromagnetism fundamental while the following will deal with the transformers and different types of electrical machines.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BEE2143

Code

SIGNALS & NETWORKS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

WED

WED

THU

THU

THU

THU

MON

FRI

FRI

THU

THU

THU

THU

TUE

TUE

WED

FRI

FRI

FRI

FRI

Day

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

12:00-12:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

Time

E22BK6

E20BK1

E20BK1

E11F11

E11F11

E11F11

E11F11

E20BK2

E22BK5

E22BK5

E11F11

E11F11

E11F11

E11F11

E20BK1

E20BK1

E20BK1

E11F11

E11F11

E11F11

E11F11

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133

BUM2133


This course introduces the students to various signals transformation techniques and its application to electrical circuits. This includes Fourier Series, Fourier Transforms and Laplace Transform. The concept of transfer function is introduced in filter analysis and design with additional two port network techniques.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BEE2223

Code

MICROPROCESSOR

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

Sec

MON

THU

THU

TUE

TUE

TUE

TUE

WED

FRI

FRI

TUE

TUE

TUE

TUE

Day

08:00-08:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E20BK1

E20BK1

E20BK1

E11F12

E11F12

E11F12

E11F12

E20BK2

E22BK5

E22BK5

E11F12

E11F12

E11F12

E11F12

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213


This course in an introduction to a microprocessor. Students are exposed to the internal architecture of the microprocessor, various instruction sets, and basic hardware design of microprocessor-based.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BEE2233

Code

ANALOG ELECTRONICS II

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

MON

MON

TUE

FRI

FRI

FRI

FRI

TUE

FRI

FRI

WED

WED

WED

WED

WED

THU

THU

TUE

TUE

TUE

TUE

Day

14:00-14:50

15:00-15:50

08:00-08:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

Time

E22BK5

E22BK5

E20BK1

E12F2

E12F2

E12F2

E12F2

E00DK2

E00DK2

E00DK2

E12F2

E12F2

E12F2

E12F2

E20BK2

E20BK1

E20BK1

E12F2

E12F2

E12F2

E12F2

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213

BEE2213


This course introduces the fundamental of semiconductor devices which are transistors. It also describes Field-Effect Transistor (FET) operational characteristic that covers the DC and AC analysis. Some important devices such as op-amp and active filters are also introduced. Towards the end of this course, students are exposed to the applications of these semiconductor devices. During the laboratory sessions, students are expected to demonstrate and troubleshoot basic semiconductor device circuits.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BEE3133

BEE3143

Code

ELECTRICAL POWER SYSTEMS

POWER SYSTEM ANALYSIS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

01

01

01

01A

01A

01B

01B

Sec

MON

MON

WED

THU

THU

THU

THU

TUE

THU

THU

WED

WED

WED

WED

THU

FRI

FRI

TUE

TUE

TUE

TUE

WED

THU

THU

FRI

FRI

FRI

FRI

Day

11:00-11:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

E21BK3

E21BK3

E20BK2

E30F23

E30F23

E30F23

E30F23

E00DK2

E00DK1

E00DK1

E10F14

E10F14

E10F14

E10F14

E00DK1

E00DK2

E00DK2

E10F14

E10F14

E10F14

E10F14

E22BK5

E22BK5

E22BK5

E10F14

E10F14

E10F14

E10F14

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE1133

BEE3133

BEE3133

BEE3133

BEE3133

BEE3133

BEE3133

BEE3133


This course introduces the fundamental of electrical power system which are the overview ofpower system,generation,transmission lines,distribution,representation of components,basic power system analysis.

This course introduces students to the fundamental concepts of power system analysis which covered the power flow problem analysis, balanced and unbalanced fault analysis andstability evaluation. Students will be exposed to the problems commonly encountered in power system engineering practice, analysis and techniques applied to solve some practical problems in power systems.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

Year

BEE3233

BEE3313

BEE4143

Code

ELECTRONICS SYSTEM DESIGN

PRINCIPLES OF CONTROL SYSTEMS

POWER SYSTEM PROTECTION & HIGH VOLTAGE

Course Name

01

01

01

01A

01A

01B

01B

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

01

01A

01A

01B

01B

Sec

MON

MON

WED

THU

THU

THU

THU

MON

WED

WED

FRI

FRI

FRI

FRI

WED

WED

THU

TUE

TUE

TUE

TUE

WED

FRI

FRI

THU

THU

THU

THU

Day

11:00-11:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

10:00-10:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

08:00-08:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

E20BK2

E20BK2

E22BK6

E11F8

E11F8

E11F8

E11F8

E21BK3

E21BK3

E21BK3

E10F16

E10F16

E10F16

E10F16

E21BK4

E21BK4

E22BK6

E10F16

E10F16

E10F16

E10F16

E21BK3

E21BK3

E21BK3

E10F14

E10F14

E10F14

E10F14

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213


In this course, the principles of advanced digital design will be introduced. It builds on logic design principles learned in BEE 1213 and demonstrates how digital design and rapid prototyping can be facilitated by FPGAs and hardware description languages (HDL). Digital design is taught at a higher level of abstraction than BEE1213. It has a lab component involving VHDL and FPGAs.

This course introduces students to the control system technology, mathematical models of feedback systems. The students will be exposed to transient and steady-state analysis, root locus, frequency response and analysis design of compensator.

This course introduces students to the concept of power system protection and high voltage engineering. It covers in detail the components of power system protections and relay coordination. The theory of high voltage engineering will also be covered in this course.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BEE4213

BEE4323

Code

MULTIMEDIA TECHNOLOGY & APPLICATIONS

EMBEDDED CONTROLLER TECHNOLOGY

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

Sec

MON

MON

THU

TUE

TUE

TUE

TUE

WED

FRI

FRI

TUE

TUE

TUE

TUE

MON

WED

WED

FRI

FRI

FRI

FRI

MON

MON

WED

FRI

FRI

FRI

FRI

Day

08:00-08:50

09:00-09:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

Time

E21BK3

E21BK3

E21BK3

E12F4

E12F4

E12F4

E12F4

E21BK3

E21BK3

E21BK3

E12F4

E12F4

E12F4

E12F4

E00DK1

E21BK3

E21BK3

E11F12

E11F12

E11F12

E11F12

E20BK1

E20BK1

E20BK1

E11F12

E11F12

E11F12

E11F12

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213

BEE1213


This course introduces the basic principles, attributes and characteristics of typography, colour, images, animation, sound and video as elements of multimedia. It also introduces how multimedia can be used in digital technology and various application areas.Student alsowill be exposed with a variety of multimedia software and tools used to develop multimedia products.

This course is an introduction to a microcontroller and is designed to give the students a fundamental understanding of the microcontroller-based system. It provides an introduction to the architecture and the design of hardware and software for the Motorola M68HC11. Various instruction sets and internal features are explained. Its applications as a single chip controller are discussed and its interfacing with various I/O devices is demonstrated



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BEE4343

BEE4373

Code

PROCESS CONTROL

ROBOTICS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

01

01

01

01A

01A

01B

01B

Sec

WED

THU

THU

FRI

FRI

FRI

FRI

MON

THU

THU

TUE

TUE

TUE

TUE

MON

TUE

TUE

WED

WED

TUE

TUE

TUE

TUE

Day

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E21BK4

E22BK6

E22BK6

E10F16

E10F16

E10F16

E10F16

E00DK1

E22BK5

E22BK5

E10F16

E10F16

E10F16

E10F16

E21BK4

E11F8

E11F8

E21BK3

E21BK3

E11F8

E11F8

E11F8

E11F8

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

B

B

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The course introduces students to establishing the process performance through methods ofspecifying and measuring process performance. With basic overview of the control loop and its components, this leads students for designing process control loops, process control improvement and techniques to assist in the process of identifying the potential for improvedprocess control performance in team.

This course provides an understanding of the principles of operation of automated equipment with particular reference to the industrial robot. This course covers classification and various types of robots and its application, robot kinematics, differential kinematics, robot dynamics, robot path planning and robot sensing.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

4

4

4

Year

BEE4113

BEE4153

BEE4163

Code

ELECTRICAL INSTALLATION DESIGN

POWER QUALITY

ALTERNATIVE ENERGY

Course Name

01

01

01

01A

01A

01B

01B

01

01

01

01A

01A

01B

01B

01

01

01

01A

01A

01B

01B

Sec

MON

TUE

TUE

THU

THU

THU

THU

TUE

TUE

FRI

MON

MON

MON

MON

TUE

TUE

FRI

WED

WED

WED

WED

Day

12:00-12:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E20BT1

E22BK6

E22BK6

E10F9

E10F9

E10F9

E10F9

E22BK6

E22BK6

E21BK4

E30F23

E30F23

E30F23

E30F23

E22BK5

E22BK5

E20BK2

E30F23

E30F23

E30F23

E30F23

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course provides knowledge in electrical installation design especially for commercial buildings. It explores the basic estimation and design procedure based on various codes of practice and standards. Student will be introduced to design a few basic systems in electrical installation such as lighting, protection system, grounding and lightning protection. Students also involve in problem solving and troubleshooting technique when they study on system inspection and testing.

This course is an introduction to power quality disturbances. It first introduces the concept ofpower quality and then quantifies the particular power quality disturbances that fall within thewider umbrella of electromagnetic phenomena. It provides a strong foundation for better understanding of the underlying principles of each power quality problem. Students are exposed to power quality solutions, standards, monitoring tools, grounding practices and distributed generation.

This course introduces students to the alternative energy theories and concepts of some components and energy utilization in electric power system industries. It covers energy conversion, utilization and storage system for renewable technologies such as solar, wind, biomass, fuel cell, wave and etc. This course emphasis on fundamental of photovoltaic (PV) systems. It also touches upon the environmental consequences of energy conversion and how alternative energy can reduce pollution and global climate change.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

4

4

Year

BEE4173

BEE4223

Code

POWER SYSTEM OPERATION & CONTROL

POWER ELECTRONICS & DRIVES SYSTEMS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

Sec

MON

MON

THU

TUE

TUE

TUE

TUE

WED

FRI

FRI

TUE

TUE

TUE

TUE

MON

WED

WED

THU

THU

THU

THU

MON

MON

TUE

THU

THU

THU

THU

Day

08:00-08:50

09:00-09:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

12:00-12:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E00DK3

E00DK3

E20BK2

E30F23

E30F23

E30F23

E30F23

E20BK1

E21BK4

E21BK4

E30F23

E30F23

E30F23

E30F23

E00DK3

E22BK6

E22BK6

E11F8

E11F8

E11F8

E11F8

E21BK3

E21BK3

E20BK2

E11F8

E11F8

E11F8

E11F8

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces students to the concept of power system operation control. Students will be exposed to the concept of power system management to meet load demand at optimal operating cost and various ways in controlling electrical power.

The primary objective of the course is to give students a foundation of knowledge, understanding, analysis and design of power electronics circuits for conversion and control of electrical energy. The course presents concepts, fundamentals analysis tools, practical consideration for design, and a range of power electronics applications. Practical experiments in the laboratory will also be conducted. Students will be exposed to the power converter, PWM switching techniques, DC and induction motor drives.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

Campus

DEGREE

Level

4

4

4

Year

BEE4233

BEE4253

BEE4333

Code

DATA COMMUNICATIONS

COMPUTER VISION SYSTEMS

INTELLIGENT CONTROL

Course Name

01

01

01

01A

01A

01B

01B

01

01

01

01A

01A

01B

01B

01

01

01

01A

01A

01B

01B

Sec

TUE

TUE

THU

MON

MON

MON

MON

MON

TUE

TUE

THU

THU

THU

THU

THU

THU

FRI

WED

WED

WED

WED

Day

08:00-08:50

09:00-09:50

12:00-12:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

12:00-12:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

E21BK3

E21BK3

E21BK3

E11F11

E11F11

E11F11

E11F11

E00DK3

E21BK3

E21BK3

E12F4

E12F4

E12F4

E12F4

E21BK3

E21BK3

E21BK3

E00H1

E00H1

E00H1

E00H1

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course emphasizes the importance and the applications of the data communications in the electrical & electronic engineering courses. The syllabus covers data communications, communication networks, and TCP/IP suites.

This course introduces students to the principles of Computer Vision which includes image formation and low level image processing, theory and techniques for extracting features fromimages, measuring shape and location, and recognizing and classifying objects. Student willbe assessed through design project using image processing software.

This course introduces students to the principles of Artificial Intelligence which includes Expert System, Fuzzy Logic, Artificial Neural Networks and Genetic Algorithms. Project based exercise will also included in order to have a better understanding on the course.



13-AUG-12 03:06 PM

FKEE

Faculty

PEKAN

NO TIMETABLE

Campus

DEGREE

DEGREE

Level

4

Year

BEE4413

BEE1112

BEE4273

Code

DIGITAL SIGNAL PROCESSING

PROJECT MANAGEMENT

HIGH VOLTAGE DIRECT CURRENT & FACTS

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

01

01

02

02

01

01

01

01A

01A

01B

01B

Sec

MON

WED

WED

TUE

TUE

TUE

TUE

TUE

TUE

WED

FRI

FRI

FRI

FRI

TUE

TUE

THU

THU

TUE

THU

THU

FRI

FRI

FRI

FRI

Day

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

11:00-11:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

15:00-15:50

16:00-16:50

Time

E22BK6

E22BK6

E22BK6

E12F3

E12F3

E12F3

E12F3

E00DK1

E00DK1

E00DK1

E12F3

E12F3

E12F3

E12F3

E00DK1

E00DK1

E00DK1

E00DK1

E20BK2

E20BK2

E20BK2

E30F21

E30F21

E30F21

E30F21

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

L

L

L

L

B

B

B

B

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces students to the fundamental principles of digital signal processing including characterization and analysis of linear time-invariant systems, z-transform, discrete Fourier transform, filters design and sturcture of discrete-time systems. This course also exposes students to computational tools in solving engineering problems related to analysis of discrete-time system and design of digital filters.

-

This course deals with the importance of HVDC transmission, analysis of HVDC converters, analysis of the FACTS and controllers. It also deals with Reactive power control and Power fault and protections.



13-AUG-12 03:06 PM

FKEE

Faculty

NO TIMETABLE

Campus

DEGREE

Level

3

3

4

4

4

4

Year

BEE3735

BEE3741

BEE4712

BEE4724

BEE4739

BEE4743

Code

INDUSTRIAL TRAINING (HW)

INDUSTRIAL TRAINING REPORT(HW)

ENGINEERING PROJECT I

ENGINEERING PROJECT II

INDUSTRIAL TRAINING (HW)

INDUSTRIAL TRAINING REPORT(HW)

Course Name

01

01

01

01

01

01


300

300

400

200

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

Exam

BEE1313

BEE4712


In industrial training the students should gain insight into industrial practice, in order to visualize the tasks and possibilities of their later occupation work. All students are required to undergo an industrial training for a certain period that has been agreed by the faculty during last semester of the academic year. The performance of each student during the periods of his/her industrial training is evaluated by the faculty staff, and the representatives from employer organization


This course introduces and exposes students to acquire and apply knowledge of sciences and electrical & electronics engineering fundamentals through individual project assessment. The students will learn how to identify, formulate and provide effective solutionto engineering problem.

This course introduces students to acquire and apply knowledge of sciences and electrical &electronics engineering fundamentals through individual project assessment. The students will learn to design and evaluate the performance of a system using integrated and interdisciplinary approaches.

In industrial training the students should gain insight into industrial practice, in order to visualize the tasks and possibilities of their later occupation work. All students are required to undergo an industrial training for a certain period that has been agreed by the faculty during last semester of the academic year. The performance of each student during the periods of his/her industrial training is evaluated by the faculty staff, and the representatives from employer organization.




Faculty : FACULTY OF MECHANICAL ENGINEERING

13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

1

1

Year

BMM1021

BMM1312

Code

OCCUPATIONAL SAFETY & HEALTH


Course Name

01

01

01A

01A

01B

01B

02

02A

02A

02B

02B

03

03A

03A

03B

03B

Sec

THU

WED

MON

MON

MON

MON

WED

THU

THU

THU

THU

WED

FRI

FRI

FRI

FRI

Day

10:00-10:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

11:00-11:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

M00DK1

M20BK2

M11F1B

M11F1B

M11F1B

M11F1B

M20BK2

M11F1B

M11F1B

M11F1B

M11F1B

M20BK1

M11F1B

M11F1B

M11F1B

M11F1B

Loc

L

L

B

B

B

B

L

B

B

B

B

L

B

B

B

B

Mode

180

60

30

30

30

30

60

30

30

30

30

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course introduces occuptional safety and health in Malaysia, identification, types and inspection of industrial hazard, analysis and control of industrial hazard, mechanical hazard, chemical hazard, physical hazard, psycho-social hazard, industrial hygiene, accident causation phenomenon, accident investigation and analysis, managing safety and health, and industrial safety and health regulation.

This course introduces to Computers and Computing Fundamentals, Program Structure, Printing, Comments, Variables, Arithmetic Operations, Math Functions, Input/ Output, Control Structure, Looping, Functions, Numeric Arrays, User Friendly Interface and their application on solving engineering problems. C programming language is utilized in this course.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

1

Year

BMM1511

Code

ENGINEERING MECHANICS LAB 1

Course Name

01

01

02

02

03

03

04

04

05

05

06

06

Sec

MON

MON

MON

MON

TUE

TUE

TUE

TUE

WED

WED

WED

WED

THU

THU

THU

THU

THU

THU

THU

THU

FRI

FRI

FRI

FRI

Day

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

Time

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

M11F6

M20F9A

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532BMM1523BMM1532


This lab introduces the engineering materials and statics principles through practicsl experiments. the covered topics for engineering materials experiments comprise steel microstructure microscopy, Brinell hardness test, Vickers hardness test, rapid quenching and tempering of plain carbon steel, creep test and impact test. The statics experiments covered are forces resolutions in basic roof truss and crane jib, moments application in bell crank lever, precision friction measurement and friction forces on an inclined plane.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

1

1

1

Year

BMM1523

BMM1532

BMM1533

Code

ENGINEERING MATERIALS

STATICS

STRENGTH OF MATERIALS 1

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

Sec

MON

MON

THU

TUE

TUE

THU

MON

MON

THU

MON

MON

THU

TUE

TUE

THU

TUE

TUE

THU

MON

MON

THU

TUE

TUE

THU

TUE

TUE

THU

Day

10:00-10:50

11:00-11:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

17:00-17:50

Time

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

Loc

L

L

L

L

L

L

L

L

L

L

L

T

L

L

T

L

L

T

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532


This course introduce students to the fundamentals of engineering materials which includes its application, atomic bonding, crystal structure, mechanical and physical properties, corrosion and degradation mechanism, microstructure analysis, phase diagram, ferrous and non-ferrous alloys, polymer and advanced materials and issues in economic, environmental,societal of materials engineering.

This course introduces introduction to mechanics, force vector, equilibrium of particle and rigid body, structural analysis, friction, centroids, center of gravity and moment of inertia.

This course introduces the concept of stress and design of structural members under axial, torsion, bending and shearing load.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

1

1

Year

BMM1553

BMM1811

Code

DYNAMICS

MECHANICAL LABORATORY 1

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

06

06

06

Sec

TUE

TUE

WED

TUE

TUE

WED

MON

MON

THU

MON

MON

MON

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

THU

THU

THU

MON

MON

MON

MON

MON

MON

Day

14:00-14:50

15:00-15:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

Time

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

M30F3

Loc

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

0

30

0

30

0

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532

BMM1532


This course introduces kinematics of particles, kinetics of particles utilizing force and acceleration principles, kinetics of particles utilizing work and energy principles, kinetics of particles utilizing impulse and momentum principles, planar kinematics of rigid bodies and planar kinetics of rigid bodies utilizing force and acceleration principles.

This course introduces student with safe working habits, drawing interpretation, basic measuring instruments, layout methods & basic hand tools. Operation of drill press, pedestalgrinder and lathe machine.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

1

2

Year

BMM1821

BMM2021

Code

MECHANICAL LABORATORY 2

QUALITY AND ENVIRONMENTALMANAGEMENT SYSTEM

Course Name

01

01

01

02

02

02

03

03

03

04

04

04

05

05

05

06

06

06

01

Sec

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

THU

THU

THU

THU

THU

THU

FRI

FRI

FRI

TUE

Day

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

12:00-12:50

Time

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M30F4

M00DK1

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

180

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y


This course introduces student basic application of the dial indicator, gauge block, gauges, measuring instruments, milling machines and processes, CNC milling simulator operation and surface grinding machines and processes.

The objective of this course is to Analysis of philosophy and implementation of Total Quality,World Class, and Productivity Management. Students will be exposed to ¿real world¿ problems through the development of cases and the application of techniques and processes selected by class members. Examination of the impact of environmental issues on organizational structure and operations from a management perspective with a focus on how environmental concerns create threats opportunities and affect organizational strategic management. Discussion of current environmental issues involving research and development legislation regulatory policies and technological advances in environmental management and examination of new "corporate culture" that integrates environmental considerations into organizational design. A special emphasis will be placed on public perceptions of environmental issues and how they affect business strategy.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

2

2

Year

BMM2433

BMM2513

Code

ELECTRICAL & ELECTRONIC TECHNOLOGY

THERMODYNAMICS 1

Course Name

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

03

03

03A

03A

03B

03B

01

01

01

02

02

02

03

03

03

Sec

WED

WED

MON

MON

MON

MON

FRI

FRI

TUE

TUE

TUE

TUE

FRI

FRI

THU

THU

THU

THU

MON

THU

THU

MON

MON

TUE

MON

MON

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

12:00-12:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

12:00-12:50

Time

M20BK2

M20BK2

M12F12

M12F12

M12F12

M12F12

M20BK2

M20BK2

M12F12

M12F12

M12F12

M12F12

M20BK7

M20BK7

M12F12

M12F12

M12F12

M12F12

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

L

L

L

L

L

L

L

L

L

Mode

60

60

30

30

30

30

60

60

30

30

30

30

60

60

30

30

30

30

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces fundamental of electric circuit, circuit network analysis and Direct Current motor. The electronics technology covers operational amplifiers, diodes, bipolar junction transistor (BJT) and digital logic circuits.

This course provides the basics of the thermodynamics involved in mechanical engineering with emphasis on pure substance especially steam and ideal gas as working fluid. The subject covers properties of pure substance, energy transfer by heat, work and mass, first law and second law of thermodynamics and entropy.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

2

Year

BMM2533

Code

FLUIDS MECHANICS 1

Course Name

01

01

01

02

02

02

03

03

03

Sec

WED

THU

THU

MON

MON

TUE

MON

TUE

TUE

Day

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

M20BK2

Loc

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course introduces properties of fluid, concept of pressure and its application, stability offloating bodies, fluid in motion analysis, fluid momentum analysis, flow measurement devices, fluid friction in piping system and dimesional analysis.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

2

Year

BMM2613

Code

COMPUTER AIDED DESIGN

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

04

04

04

04

05

05

05

05

06

06

06

06

Sec

MON

MON

WED

WED

MON

MON

WED

WED

TUE

TUE

FRI

FRI

TUE

TUE

FRI

FRI

TUE

TUE

TUE

TUE

THU

THU

THU

THU

TUE

TUE

THU

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

M11F1A

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

29

30

29

30

29

30

29

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course introduces engineering drawing, fundamentals of technical drawing, Introductionto CAD Software, 2D drawing command, coordinate system, organizing the drawing, CAD drawing setting



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM2521

Code


Course Name

01

01

02

02

03

03

04

04

05

05

06

Sec

MON

MON

MON

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

WED

WED

WED

WED

WED

WED

THU

THU

THU

THU

THU

THU

THU

THU

THU

THU

THU

THU

FRI

FRI

FRI

Day

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

10:00-10:50

10:00-10:50

10:00-10:50

Time

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

M11F6

M20F9A

M20F9B

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

0

0

0

0

0

0

30

30

30

30

30

30

30

30

30

30

30

30

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553BMM1533


Prerequisites for bacth 2008 and below are BMM1543.This lab introduces an application on the topic in stress and strain in axial & compression loading, torsion, fatigue, bending moment, shearing stress, transformation of stress and strain, kinematics of particles, force and acceleration, work and enargy, impulse and momentum.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

Year

BMM2521

BMM2523

BMM2543

Code


THERMODYNAMICS 2

FLUIDS MECHANICS 2

Course Name

06

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

Sec

FRI

FRI

FRI

MON

MON

THU

TUE

TUE

THU

TUE

TUE

THU

TUE

THU

THU

MON

MON

THU

MON

TUE

TUE

Day

11:00-11:50

11:00-11:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

M11F6

M20F9A

M20F9B

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

Loc

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

0

0

0

65

65

65

60

60

60

60

60

60

60

60

60

60

60

60

61

61

61

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1533BMM1553BMM1533BMM1553BMM1533BMM1553

BMM2513

BMM2513

BMM2513

BMM2513

BMM2513

BMM2513

BMM2513

BMM2513

BMM2513

BMM2533

BMM2533

BMM2533

BMM2533

BMM2533

BMM2533

BMM2533

BMM2533

BMM2533


This course focuses on the application of the thermodynamics knowledge in various engineering systems. The subject covers the review and analysis of different gas power cycles, vapor power cycles, reciprocating engines, refrigerators, heat pumps and compressors. At the end of the course, students should be able to evaluate the different thermal systems and perform detail analysis to solve the related engineering problems.

This course introduces the flow over immersed body, boundary layer analysis, compressible fluids flow, application in pumps and turbines.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

Year

BMM2582

BMM3011

BMM3513

Code

STRENGTH OF MATERIALS 2

ENGINEER & SOCIETY

HEAT TRANSFER

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

01

02

02

02

03

03

03

Sec

MON

MON

THU

TUE

TUE

THU

MON

MON

THU

THU

MON

MON

TUE

TUE

TUE

THU

MON

THU

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

17:00-17:50

11:00-11:50

14:00-14:50

15:00-15:50

12:00-12:50

14:00-14:50

15:00-15:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M22BK5

M00DK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

204

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533BMM1543BMM1533

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523


THIS CODE IS ONLY FOR BACTH 2010 AND 2011.This course introduces students to analyze shearing stresses in beams and thin-walled members ,transformations of stress and strain state , stresses under combined loadings on rectangular and round members, deflection of beams, buckling of columns, bending of thin plates.

This course introduces the engineering profession, local industries sector, issues in local industries, ethics and public responsibility, engineer and law, and contract law.

The basic modes of thermal energy transfer viz., conduction, convection and radiation are introduced with emphasis on understanding the fundamental concepts useful for solving real-life problems. The applicability of 1-D heat conduction in various geometries, the validity of one dimensional heat conduction in fins, the distinction between steady and unsteady states, the concept of boundary layer, the analogy between fluid flow and convective heat transfer, the distinction between free and forced convection, the properties of materials which are responsible for energy transfer by radiation, the principles in the design of heat exchangers with importance on the understanding of fundamental concepts are emphasized in this course.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BMM3521

BMM3531

Code

ENGINEERING FLUIDS MECHANICS LAB

ENGINEERING THERMODYNAMICS LAB

Course Name

01

01

02

02

03

03

04

04

05

05

06

06

01

01

02

02

03

03

04

04

05

05

06

06

Sec

MON

MON

MON

MON

TUE

TUE

TUE

TUE

THU

THU

THU

THU

MON

MON

MON

MON

TUE

TUE

TUE

TUE

THU

THU

THU

THU

Day

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

Time

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F10

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

M10F25

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2543

BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523BMM2513BMM2523


This lab introduces the application on topics in fluid mechanics covering properties of fluid, flow pattern over different immersed bodies, fluid flow determination and validation of Bernoulli¿s theorem, friction losses in pipes, turbomachinery performance analysis and pump performance.

This lab introduces practical application of basic thermodynamics principles and the coveredareas are properties of pure substance, first law and second law of thermodynamics, ideal gas law and perfect gas characteristics, entropy, compressors, refrigeration cycle, conduction heat transfer, convection, radiation, method of solution, and their practical application.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BMM3532

BMM3553

Code

MEASUREMENT & INSTRUMENTATION

MECHANICAL VIBRATIONS

Course Name

01

01

02

02

03

03

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

Sec

WED

WED

FRI

FRI

FRI

FRI

MON

MON

THU

MON

MON

TUE

TUE

TUE

TUE

THU

WED

WED

WED

WED

TUE

TUE

THU

FRI

FRI

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M21BK4

M20BK1

M20BK1

M20BK1

M10F22

M10F22

M10F22

M10F22

M20BK1

M20BK1

M20BK1

M10F22

M10F22

M10F22

M10F22

M20BK1

M20BK1

M20BK1

M10F22

M10F22

M10F22

M10F22

Loc

L

L

L

L

L

L

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553


This course introduces the principles of measurement, signal analysis and provide the students hands-on laboratory experiences with a variety of transducers and instruments (including `virtual instruments¿). Students also expose how to write substantial, professional,computer-generated technical reports.

This course introduces fundamental of vibration, free vibration response for single, two and multi degree of freedom, harmonically excited vibration response for single and two DOF system and some applications of vibrations in engineering.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM3562

Code

FINITE ELEMENT METHOD

Course Name

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

03

03

03A

03A

03B

03B

Sec

WED

WED

MON

MON

MON

MON

FRI

FRI

TUE

TUE

TUE

TUE

WED

WED

WED

WED

WED

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

30

30

15

15

15

15

30

30

15

15

15

15

30

30

15

15

15

15

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533

BMM1533


THIS CODE IS ONLY FOR BACTH 2010 AND 2011.-



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM3563

Code

FINITE ELEMENT METHOD

Course Name

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

03

03

03A

03A

03B

03B

Sec

WED

WED

MON

MON

MON

MON

FRI

FRI

TUE

TUE

TUE

TUE

WED

WED

WED

WED

WED

WED

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

M22BK5

M22BK5

M11F1B

M11F1B

M11F1B

M11F1B

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

40

40

20

20

20

20

40

40

20

20

20

20

40

40

20

20

20

20

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583

BMM2583


THIS CODE IS ONLY FOR BACTH 2009.This course covers the basics of Computer-Aided Engineering (CAE) and Finite Element Method, some related mathematics and continuum mechanics, theory of Finite Element Method (FEM), application of FEM to solving problems in solid, structural, heat transfer and dynamics, and finite element analysis of real world problems using FE software(s).



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM3611

Code

MANUFACTURING PROCESSES LAB

Course Name

01

01

01

02

02

02

Sec

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

MON

Day

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

10:00-10:50

10:00-10:50

10:00-10:50

10:00-10:50

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

10:00-10:50

Time

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643


This lab provides hands-on experience on manufacturing actvities and equipment through a series of laboratory exercises with emphasied on safety requirements, work with engineeringmaterials and processing tools. In each lab, manufactuirng process will be thorougly explained. This course develops skills in writing technical report.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM3611

Code


Course Name

02

03

03

03

04

04

04

Sec

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

TUE

Day

10:00-10:50

10:00-10:50

10:00-10:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

Time

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M10F2

M40F15

M40F16

M40F17

M40F19

M10F2

M40F15

M40F16

M40F17

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643




13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

Year

BMM3611

Code


Course Name

04

05

05

05

06

06

06

Sec

TUE

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

WED

Day

16:00-16:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

16:00-16:50

Time

M40F19

M10F2

M40F15

M40F16

M40F17

M40F19

M10F2

M40F15

M40F16

M40F17

M40F19

M10F2

M40F15

M40F16

M40F17

M40F19

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

M10F2

M40F15

M40F16

M40F17

M40F19

M40F8A

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643BMM2643BMM3643




13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

Year

BMM3613

BMM3623

Code

AUTOMATIC CONTROL

MECHANICAL DESIGN

Course Name

01

01

01

01A

01A

01B

01B

02

02

02

02A

02A

02B

02B

03

03

03

03A

03A

03B

03B

01

01

01

02

02

02

03

03

03

Sec

MON

MON

THU

MON

MON

MON

MON

TUE

TUE

THU

TUE

TUE

TUE

TUE

MON

MON

THU

THU

THU

THU

THU

MON

WED

WED

TUE

TUE

THU

TUE

TUE

THU

Day

10:00-10:50

11:00-11:50

10:00-10:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

12:00-12:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

17:00-17:50

Time

M20BK7

M20BK7

M20BK7

M12F13

M12F13

M12F13

M12F13

M20BK7

M20BK7

M20BK7

M12F13

M12F13

M12F13

M12F13

M20BK7

M20BK7

M20BK7

M12F13

M12F13

M12F13

M12F13

M22BK6

M22BK6

M22BK6

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

Loc

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

B

B

B

B

L

L

L

L

L

L

L

L

L

Mode

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

30

30

30

30

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM2582

BMM2582

BMM2582

BMM2582

BMM2582

BMM2582

BMM2582

BMM2582

BMM2582


Pre-requisite for intake 2010 and 2011 is BMM2582.

This course introduces linear, time-invariant (LTI) control system modeling, analysis and design. The covered topics are frequency domain modeling of mechanical, electrical and electro-mechanical systems; time response analysis, stability analysis and steady-state analysis; control system analysis and design using root-locus and frequency response techniques.

Introduction to design process. Study of static and dynamic loading resulting normal and shear stresses, principles stresses. Engineering materials, static and fatigue failure theories.Machine element design including screws, shafts, bolts, fasteners, welded joints, keys and coupling and springs.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

Year

BMM3633

BMM3643

BMM4022

Code

INDUSTRIAL ENGINEERING

MANUFACTURING PROCESSES

PROJECT MANAGEMENT

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

03

03

03

01

01

Sec

MON

MON

THU

MON

TUE

TUE

TUE

THU

THU

MON

MON

THU

TUE

TUE

THU

MON

MON

THU

WED

WED

Day

14:00-14:50

15:00-15:50

12:00-12:50

12:00-12:50

14:00-14:50

15:00-15:50

12:00-12:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

12:00-12:50

13:00-13:50

Time

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK7

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M00DK1

M00DK1

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

62

62

62

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

180

180

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N


This course introduces Industrial engineering, productivity, facilities planning, facilities design, work study, human factors engineering, introduction to production planning and control, inventory management, total quality management system and quality control.

This course introduces students to conventional and advanced manufacturing processes, used to convert engineering materials into the finished products. It pays attention to understand relation between product specification, engineering materials and selection of manufacturing process. In addition, some related manufacturing activities such as metrology, assembly and surface treatment are also included . With this knowledge, student must able to discuss sustainability in manufacturing which will be detailed in group projects.

This course introduces the project management concepts in order to enhance the skills and managerial abilities and provide a holistic and integrative view of project management. The covered areas for project management are strategic management, organization structure and culture, project management, cost estimating and budgeting and project plan.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

4

4

4

4

4

Year

BMA4703

BMA4713

BMA4733

BMA4743

BMB4703

Code

AUTOMOTIVE TECHNOLOGY

INTERNAL COMBUSTION ENGINE

AUTOMOTIVE DESIGN & STYLING

ROAD VEHICLE AERODYNAMICS

BIOMECHANICS

Course Name

01

01

01

01

01

01

01

01

01A

01A

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

THU

THU

FRI

TUE

FRI

FRI

WED

WED

MON

MON

MON

TUE

TUE

MON

MON

THU

THU

TUE

TUE

WED

WED

Day

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

12:00-12:50

16:00-16:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

12:00-12:50

13:00-13:50

Time

M30F23

M30F23

DPM

DPM

DPM

DPM

DPM

DPM

M30F24

M30F24

M30F21A

M30F21A

DPM

M30F21A

M30F21A

DPM

DPM

M30F11

M30F11

M21BT5

M21BT5

M12F13

M12F13

Loc

B

B

L

L

L

L

L

L

B

B

B

B

L

B

B

L

L

B

B

L

L

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM2523

BMM2523

BMM2523

BMM2523

BMM2523

BMM2543

BMM2543

BMM2543

BMM2543

BMM1533

BMM1533

BMM1533

BMM1533


This course introduces workshop safety, the workings of automotive engines and the supporting systems, the workings of the automotive electrical, electronic and HVAC systems, the operation of the drivetrain, and the whole automotive chassis.

This course provides the scientif and technological foundations for understandings the operation, performance, design, application and pollution analysis of internal combustion engines.

This course introduces fundamental techniques of vehicle styling and the component associated such as sketching, rendering, surfacing as well as model making. During the course students are exposed to techniques in automobile styli9ng design through basic concepttual sketches, finished rendering, 2D and 3D graphic and clay model.

This course introduce students to advanced concepts of ground vehicles aerodynamic in particular car and truck aerodynamics. Solve problem related using computional approach and theoritical analysis

-



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

4

4

4

4

4

4

Year

BMB4753

BMF4703

BMF4723

BMF4753

BMI4713

BMI4733

Code

BIOFLUID MECHANICS

PRODUCTION PLANNING CONTROL

DESIGN FOR MANUFACTURE & ASSEMBLY

QUALITY ENGINEERING

PRODUCTION PLANNING CONTROL

QUALITY ENGINEERING

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

THU

WED

WED

FRI

FRI

MON

MON

WED

WED

MON

MON

THU

WED

WED

FRI

FRI

MON

MON

THU

Day

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

11:00-11:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

11:00-11:50

Time

M21BT5

M21BT5

M11F1A

M11F1A

M21BT5

M21BT5

M21F7

M21F7

M21F7

M21F7

M21BT5

M21BT5

M21BT5

M21BT5

M21BT5

M21BT5

M21BT5

M21F7

M21F7

M21BT5

M21BT5

M21BT5

Loc

L

L

B

B

L

L

B

B

B

B

L

L

L

L

L

L

L

B

B

L

L

L

Mode

30

30

30

30

0

0

0

0

0

0

0

0

1

1

1

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM2533

BMM2533

BMM2533

BMM2533

BMM3633

BMM3633

BMM3633

BMM3633

BMM3643

BMM3643

BMM3643

BMM3643

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633

BMM3633


-

This course introduces production planning and control, forecasting, aggregate planning, production scheduling, inventory management, material requirements planning and project management.

Design for manufacture and assembly is methodologies and tools to define product development phases. It provides experience of working in teams to design high-quality competitive products. Primary goals are to improve ability to reason about design, material and process alternatives and apply modeling techniques appropriate for different development phases.

This course introduces students with basic knowledge on quality control, engineering and management. It is also introduce the statistical tools and techniques to monitor, control and improve product, process quality and expose students the concept of integrating human andtechnical aspects for managing quality itself.

-

-



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

Campus

DEGREE

Level

4

4

4

4

4

Year

BMI4743

BMM4623

BMM4703

BMM4723

BMM4733

Code

DESIGN FOR MANUFACTURE & ASSEMBLY

MECHANICAL SYSTEM DESIGN

HYDRAULICS AND PNEUMATICS

MECHANISM DESIGN

POWER PLANT TECHNOLOGY

Course Name

01

01

01

01

01

01

01

02

02

02

03

03

03

01

01

01

01

01

01A

01A

01B

01B

01

01

01

Sec

MON

MON

WED

WED

WED

WED

FRI

WED

FRI

FRI

WED

WED

FRI

TUE

TUE

WED

TUE

TUE

MON

MON

THU

THU

MON

WED

WED

Day

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

11:00-11:50

08:00-08:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

12:00-12:50

10:00-10:50

11:00-11:50

Time

M21F7

M21F7

M21BT5

M21BT5

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

M20BK1

DPM

DPM

DPM

DPM

DPM

M21F7

M21F7

M21F7

M21F7

DPM

DPM

DPM

Loc

B

B

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

L

L

L

Mode

30

30

30

30

60

60

60

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

80

80

80

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BMM3643

BMM3643

BMM3643

BMM3643

BMM3623

BMM3623

BMM3623

BMM3623

BMM3623

BMM3623

BMM3623

BMM3623

BMM3623

BMM2543

BMM2543

BMM2543

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM1553

BMM2523BMM2543BMM2523BMM2543BMM2523BMM2543


-

-

This course introduces hydraulic system, hydraulic actuators, valves and accessories, pneumatics system, pneumatic actuators, valves and accessories, electro fluid power system and programmable logic controller.

This course introduces mechanisms and kinematics, vector and position analysis, velocity analysis, acceleration analysis, cam design and kinematics analysis and mechanism analysis and synthesis.

This course introduces steam power plant and its components, economics of power generation, fuels and combustion, Steam generators, steam turbines, gas power plant, combined power plant, and environmental aspects of power generation.



13-AUG-12 03:12 PM

FKM

Faculty

PEKAN

NO TIMETABLE

Campus

DEGREE

DEGREE

Level

4

4

4

2

3

3

Year

BMM4753

BMM4783

BMM4912

BMM2643

BMM3912

BMM3991

Code

RENEWABLE ENERGY RESOURCES

COMPUTATIONAL FLUID DYNAMICS

FINAL YEAR PROJECT 1

MANUFACTURING PROCESSES



Course Name

01

01

01

01

01

01

01

01

01

01

01BMM

02BMA

03BMI

04BMB

Sec

MON

MON

TUE

THU

THU

FRI

FRI

MON

Day

08:00-08:50

09:00-09:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

13:00-13:50

Time

DPM

DPM

DPM

M11F1B

M11F1B

M11F1A

M11F1A

M00DK1

Loc

L

L

L

B

B

L

L

L

Mode

80

80

80

30

30

30

30

300

0

0

130

100

50

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

N

Y

N

N

N

N

Exam

BMM2543BMM1312BMM2543BMM1312BMM2543BMM1312BMM2543BMM1312


Section 01 - BMM, 02 - BMA, 03 - BMI and 04 - BMB

-

This subject is to introduce the fundamental and application of simulation of fluid mechanics phenomenon and solving fluids problem via simulation. Holistic approaches of programming and commercial software are essentials towards solving, analyzing and evaluating the results of fluid mechanics problem-based simulation. The objective of this subject is to provide the basic of simulation focusing on fluid problem which is from mathematical model such as Navier Stokes equation and solve it numerically with the aid of programming software. The next step is to understand and utilize commercial software to solve engineering fluid problem base on actual physical shape appearance which is more complexboundaries.

-

This course introduces students to industrial manufacturing processes used for converting raw materials into finished products. Various processes, machinery, and operations will be examined with emphasis placed on understanding engineering materials and processing parameters that influence design considerations, product quality, and production costs. Sustainable manufacturing process will be discussed and included in student project presentation.

This course aim to give chances for the student to practice and apply their knowledge and skills that they gain during their study in the university. Student will learn to identify problem, analyse the problem, give general solution, collect the required data regarding specific solution and do research on the solution. Finally student will be able to produce report proposal for the suggested solution and present the study result confidently and with good ethics. During the course, student will be supervised by their supervisor in order to guide andmonitor the students project progress and to ensure that they can achieve the course objective.

This training exposes the students to professional skills and experience in aspect of mechanical engineering practice. The exposure will help to produce an excellent, responsible and good attitude.



13-AUG-12 03:12 PM

FKM

Faculty

NO TIMETABLE

Campus

DEGREE

Level

3

4

4

4

Year

BMM3995

BMM4924

BMM4993

BMM4999

Code

INDUSTRIAL TRAINING



INDUSTRIAL TRAINING

Course Name

01BMM

02BMA

03BMI

04BMB

01

01BMM

02BMA

03BMF

01BMM

02BMA

03BMF


130

100

50

30

300

20

20

20

20

20

20

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

Exam

BMM3912


Section 01 - BMM, 02 BMA, 03 - BMI and 04-BMB

Section 01 - BMM, 02 - BMA and 03 - BMF

Section 01 - BMM, 02 - BMA and 03 - BMF


-





Faculty : FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING

13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

Year

BCC1012

BCC1013

Code

ICT COMPETENCY WORKSHOP

ICT COMPETENCY WORKSHOP

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

04

04

04

04

05

05

05

05

01

01

01

01

Sec

TUE

TUE

WED

WED

MON

MON

TUE

TUE

MON

MON

TUE

TUE

THU

THU

FRI

FRI

THU

THU

FRI

FRI

MON

MON

TUE

TUE

Day

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

FSK7B

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

0

0

0

0

30

30

30

30

30

30

30

30

0

0

0

0

0

0

0

0

1

1

1

1

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course is designated to expose the student an IT Technician and Desktop Support Technician such as be able to troubleshoot and manage all the computer hardware and software. The work is carried out independently and in a team. Student must be able to carryout assigned tasks.

This course is designated to expose the student an IT Technician and Desktop Support Technician such as be able to troubleshoot and manage all the computer hardware and software. The work is carried out independently and in a team. Student must be able to carryout assigned tasks.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BCC1032

Code

APPLICATION DEVELOPMENT WORKSHOP

Course Name

01

01

01

01

02

02

02

02

03

03

03

03

04

04

04

04

05

05

05

05

06

06

06

06

07

07

07

07

08

08

08

08

Sec

MON

MON

FRI

FRI

MON

MON

TUE

TUE

MON

MON

TUE

TUE

MON

MON

THU

THU

THU

THU

FRI

FRI

MON

MON

TUE

TUE

WED

WED

FRI

FRI

WED

WED

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

Time

FSK6

FSK6

FSK6

FSK6

FSK4

FSK4

FSK4

FSK4

FSK6

FSK6

FSK6

FSK6

FSK4

FSK4

FSK6

FSK6

FSK4

FSK4

FSK4

FSK4

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10B

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10B

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

31

31

31

31

31

31

31

31

31

31

31

31

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course enables students to learn how to develop an executable application starting withthe design of interface, writing of the codes using programming tool and lastly integrating theapplication with database.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

Year

BCN1043

BCN1052

Code

COMPUTER ARCHITECTURE & ORGANIZATION

LOCAL AREA NETWORK WORKSHOP

Course Name

01

01

01

02

02

02

01

01

01

01

02

02

02

02

03

03

03

03

Sec

MON

MON

TUE

WED

THU

THU

MON

MON

TUE

TUE

THU

THU

THU

THU

FRI

FRI

FRI

FRI

MON

MON

TUE

TUE

Day

11:00-11:50

12:00-12:50

12:00-12:50

16:00-16:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

Y-DK-02

Y-DK-02

Y-DK-03

Y-DK-02

Y-DK-02

Y-DK-02

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK13

FSK3

FSK3

FSK3

FSK3

Loc

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

104

104

104

0

0

0

31

31

31

31

27

30

27

30

27

30

27

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


This course discusses the structure and function of a computer. It expose student with the architecture and organization of a computer. This subject covers on the numbering system and the representation of data, the internal and external computer communication through system buses and Input and Output, computer storage, internal architecture of Central Processing Unit, Logic Gates and Boolean Algebra.

This subject focuses in establishing a computer network. The student will be experience the fundamental of computer network, network topology, network devices, UTP cabling, networkoperating system and protocols, network maintenance and troubleshooting, network documentation, internet connection and security elements.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

Year

BCN2053

BCN2223

Code

OPERATING SYSTEMS

LOCAL AREA NETWORK WORKSHOP

Course Name

01

01

1A

1A

1B

1B

1C

1C

01

01

01

01

Sec

FRI

FRI

MON

MON

THU

THU

WED

WED

MON

MON

TUE

TUE

Day

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

Y-DK-04

Y-DK-04

FSK6

FSK6

FSK6B

FSK6B

FSK6B

FSK6B

FSK13

FSK13

FSK13

FSK13

Loc

L

L

B

B

B

B

B

B

B

B

B

B

Mode

60

60

30

30

30

30

0

0

4

4

4

4

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N


This subject introduces the various data and control structures necessary for the design and implementation of modern computer operating systems. Process creation and control, communication synchronization and concurrency, memory management and file systems concept are explored in the context of the WINDOWS/LINUX operating system.

-



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BCS1023

Code

PROGRAMMING TECHNIQUES

Course Name

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

02B

02B

02C

02C

03

03

03A

03A

03B

03B

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

TUE

TUE

WED

WED

THU

THU

FRI

FRI

MON

MON

TUE

TUE

THU

THU

Day

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

Y-DK-01

Y-DK-01

FSK6

FSK6

FSK4

FSK4

FSK4B

FSK4B

Y-DK-02

Y-DK-02

FSK6

FSK6

FSK6

FSK6

FSK6

FSK6

Y-DK-02

Y-DK-02

FSK6

FSK6

FSK6

FSK6

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

B

B

L

L

B

B

B

B

Mode

115

115

35

35

35

35

35

35

115

115

35

35

35

35

35

35

70

70

35

35

35

35

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course discusses on understanding problems and translating them into computer solution techniques using programming language. This course enables students to apply programming techniques, write programming codes from given problems and execute programming codes successfully.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BCS1093

Code

DATA STRUCTURE & ALGORITHMS

Course Name

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

02B

02B

02C

02C

03

03

03A

03A

03B

03B

03C

03C

Sec

MON

MON

TUE

TUE

WED

WED

THU

THU

TUE

TUE

WED

WED

THU

THU

FRI

FRI

MON

MON

TUE

TUE

THU

THU

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

17:00-17:50

18:00-18:50

Time

Y-DK-02

Y-DK-02

FSK6

FSK6

FSK6

FSK6

FSK6

FSK6

Y-DK-02

Y-DK-02

FSK6

FSK6

FSK6

FSK6

FSK6

FSK6

Y-DK-02

Y-DK-02

FSK6

FSK6

FSK6

FSK6

FSK6

FSK6

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

B

B

L

L

B

B

B

B

B

B

Mode

90

90

30

30

30

30

30

30

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023


This course is designed to expose the students to the data structures and algorithm. It provide theoretical basis in data structures and the application of data structures is based onstandard algorithms. Students must also be able to transform the data structure and algorithms problems into the computer programs.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

1

Year

BCS1133

Code

SYSTEMS ANALYSIS & DESIGN

Course Name

01

01

02

02

1A

1A

1B

1B

1C

1C

2A

2A

2B

2B

2C

2C

Sec

THU

THU

FRI

FRI

WED

WED

FRI

FRI

TUE

TUE

MON

MON

MON

MON

THU

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

Y-DK-02

Y-DK-02

Y-DK-04

Y-DK-04

FSK10B

FSK10B

FSK9

FSK9

FSK9

FSK9

FSK10B

FSK10B

FSK9

FSK9

FSK10B

FSK10B

Loc

L

L

L

L

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

60

60

30

30

30

30

0

0

30

30

30

30

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course describes the concepts and methods of information system analysis and design,with an emphasis on system analysis methods and tools. The course focuses on the issues and management technique involved in analysis, design and implementation of information system



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BCI2023

BCM2043

Code

DATABASE SYSTEMS

MULTIMEDIA TECHNOLOGY & APPLICATION

Course Name

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

02B

02B

01

01

01A

01A

01B

01B

01C

01C

02

02

Sec

WED

WED

THU

THU

FRI

FRI

MON

MON

MON

MON

TUE

TUE

THU

THU

MON

MON

TUE

TUE

THU

THU

MON

MON

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

Y-DK-02

Y-DK-02

FSK5

FSK5

FSK5

FSK5

FSK5

FSK5

Y-DK-02

Y-DK-02

FSK5

FSK5

FSK5

FSK5

Y-DK-04

Y-DK-04

FSK14

FSK14

FSK14

FSK14

FSK14

FSK14

Y-DK-02

Y-DK-02

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

B

B

L

L

Mode

60

60

30

30

30

30

0

0

60

60

30

30

30

30

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


ELECTIVE FOR BCN & BCG

The course emphasizes on the importance of data to an organization and how the data should be managed. Database management system (DBMS) will be viewed as a solution to the problems of file processing system. Aspects of relational database design will be covered in details. This includes database development life cycle, database architecture, data models, and normalization process. Several query languages such as relational algebra, Structured Query Language (SQL) and Query by Example (QBE) will be discussed but the emphasis is on SQL. Students will be given a real life problem to design and developa database application system. In the later part of the course students will be exposed to thelatest developments in database architecture.

This course will expose students to the theoretical and fundamental concepts of multimedia, its applications and the techniques involved. Topics to be covered include text and audio, image and video, the art of multimedia, and multimedia over the network.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

Year

BCM2053

BCM3183

BCN1053

Code

COMPUTER GRAPHICS

MULTIMEDIA INTERACTIVE DEVELOPMENT

DATA COMMUNICATION & NETWORKING

Course Name

01

01

01A

01A

01B

01B

01

01

1A

1A

1B

1B

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

Sec

TUE

TUE

WED

WED

FRI

FRI

THU

THU

MON

MON

FRI

FRI

MON

MON

TUE

TUE

THU

THU

FRI

FRI

MON

MON

TUE

TUE

Day

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

20:00-20:50

21:00-21:50

Time

Y-BK-06

Y-BK-06

FSK15

FSK15

FSK15

FSK15

Y-DK-05

Y-DK-05

FSK15

FSK15

FSK15

FSK15

Y-DK-03

Y-DK-03

FSK11

FSK11

FSK11

FSK11

FSK11

FSK11

Y-DK-03

Y-DK-03

FSK11

FSK11

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

B

B

L

L

B

B

Mode

60

60

30

30

30

30

60

60

30

30

30

30

30

30

30

30

0

0

0

0

0

0

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


ELECTIVE FOR BCN & BCGThis course is designed to expose the student to the basic concept of digital graphic technology. This includes understanding and designing aspects by using a computer graphics application. The student will be exposed to the skill of using a computer graphics application. Through this course, the students will expose to explore on the latest graphics design context which will focus on the `graphic thinking' and `creative design process'.

This course is designed to expose the student to the multimedia interactive project including basic theories of multimedia learning. This course also teach student to apply various multimedia scripting and tools in order to develop a prototype of multimedia interactive application.

This course introduces the architecture, structure, functions, components, and models of theInternet and other computer networks. It uses the OSI and TCP layered models to examine the nature and roles of protocols and services at the application, network, data link, and physical layers. The principles and structure of IP addressing and the fundamentals of Ethernet concepts, media, and operations are introduced to provide a foundation for the curriculum.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BCN2083

BCN2193

Code

COMPUTER NETWORKS

NETWORK TECHNOLOGIES

Course Name

01

01

01A

01A

01B

01B

01

01

01A

01A

01A

01B

01B

01B

Sec

TUE

TUE

WED

WED

TUE

TUE

TUE

TUE

THU

THU

THU

THU

THU

THU

Day

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

13:00-13:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

Y-DK-03

Y-DK-03

FSK11

FSK11

FSK11

FSK11

Y-BK-04

Y-BK-04

FSK11

FSK11

FSK11

FSK2

FSK2

FSK2

Loc

L

L

B

B

B

B

L

L

B

B

B

B

B

B

Mode

60

60

30

30

30

30

60

60

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053


The primary focus of this course is on LAN switching and wireless LANs. This course focuses on Layer 2 switching protocols and concepts used to improve redundancy, propagate VLAN information, and secure the portion of the network where most users access network services. Switching technologies are relatively straightforward to implement; however, as with routing, the underlying protocols and algorithms are often quite complicated. This course will go to great lengths to explain the underlying processes of the common Layer 2 switching technologies. Each switching concept will be introduced within the context of a single topology for each chapter.

This course describes the architecture, components, and operation of routers, and explains the principles of routing and routing protocols. Students analyze, configure, verify, and troubleshoot the primary routing protocols RIPv1, RIPv2, EIGRP, and OSPF. By the end of this course, students will be able to recognize and correct common routing issues and problems. Students complete a basic procedural lab, followed by basic configuration, implementation, and troubleshooting labs in each chapter.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

Year

BCN3123

BCN3133

BCN3143

Code

DISTRIBUTED SYSTEMS

COMPUTER ETHICS & POLICIES

RELATIONAL DATABASE FOR Z/OS APPLICATION

Course Name

01

01

01A

01A

01B

01B

01

01

01

01

01

01A

01A

01A

Sec

MON

MON

THU

THU

FRI

FRI

TUE

TUE

WED

WED

WED

FRI

FRI

FRI

Day

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

Y-DK-04

Y-DK-04

FSK6B

FSK6B

FSK6B

FSK6B

Y-DK-03

Y-DK-03

Y-DK-03

Y-DK-04

Y-DK-04

FSK12

FSK12

FSK12

Loc

L

L

B

B

B

B

L

L

L

L

L

B

B

B

Mode

60

60

30

30

30

30

90

90

90

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCN3083

BCN3083

BCN3083

BCN3083

BCN3083


CORE PROGRAM FOR BCN, ELECTIVE FOR BCG & BCS

CORE PROGRAM FOR BCN, ELECTIVE FOR BCG & BCS

Elective For All Programme

Owing to new technologies like the Internet and cluster computing, distributed systems havebecome reality and are widely applied in practice. Well known are the Web and distributed component infrastructures like CORBA or J2EE compliant application servers. Moving from a centralized to a distributed environment introduces new complexity: communication, synchronous and asynchronous behaviour of the different components in the system, architectural considerations, failures and more. Distributed systems handle these issues by providing tools and protocols for efficient and powerful coordination among the cooperating components. The objectives of this new subject is to learn the state-of-the-art of practical distributed systems, to understand the typical problems and challenges encountered in distributed environments, and to discuss both sound and practical solutions for them.

This course introduces an overview of how computers have affected society and how they could further affect it in the future. Student will learn how to examine various ethical issues surrounding computers. These will include piracy, hacking, viruses, responsibility and liabilityfor the use of software, cyberporn, computerized invasion of privacy, computers in the workplace, and the use of artificial intelligence and expert systems. This course will also consider many of the moral and professional issues that those who work with computers might encounter in real life.

-



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BCS2143

BCS2203

Code

OBJECT ORIENTED PROGRAMMING

WEB APPLICATION DEVELOPMENT

Course Name

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

02B

02B

02C

02C

01

01

01A

01A

01B

01B

Sec

WED

WED

THU

THU

FRI

FRI

MON

MON

MON

MON

TUE

TUE

THU

THU

FRI

FRI

THU

THU

MON

MON

TUE

TUE

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

Y-DK-03

Y-DK-03

FSK4

FSK4

FSK4

FSK4

FSK4

FSK4

Y-DK-03

Y-DK-03

FSK4

FSK4

FSK4

FSK4

FSK4

FSK4

Y-BK-06

Y-BK-06

FSK14

FSK14

FSK4B

FSK4B

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

B

B

L

L

B

B

B

B

Mode

60

60

30

30

30

30

0

0

60

60

30

30

30

30

0

0

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023


This course provides an introduction to the concepts of object orientation and object-oriented programming (OOP) techniques using Java programming language. It will provide students with a through look at the basic constructs of the Java programming language suchas its basic data types and operations. It will also emphasize on the use of OOP characteristic that expose students to Unified Modelling Language (UML) design, class and object, inheritance, polymorphism, exception handling and Graphical User Interface (GUI) and event driven programming.

This course provides students with the knowledge and skills that are needed to develop webapplication. Students learn data access from database to web application, create and utilize web services, create component and deploy application. The students will implement what they have learned in a mini project.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

Year

BCS2213

BCS2283

BCS2303

Code

FORMAL METHOD

INTRODUCTION TO SOFTWARE ENGINEERING

WEB SCRIPTING

Course Name

01

01

01A

01A

01B

01B

01

01

01

01

01

01A

01A

01B

01B

01C

01C

02

02

02A

02A

02B

02B

Sec

THU

THU

WED

WED

WED

WED

TUE

WED

WED

WED

WED

THU

THU

FRI

FRI

TUE

TUE

WED

WED

TUE

TUE

FRI

FRI

Day

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

Y-DK-04

Y-DK-04

FSK15

FSK15

FSK9

FSK9

Y-DK-04

Y-DK-01

Y-DK-01

Y-DK-05

Y-DK-05

FSK5

FSK5

FSK5

FSK5

FSK4B

FSK4B

Y-DK-04

Y-DK-04

FSK4B

FSK4B

FSK4B

FSK4B

Loc

L

L

B

B

B

B

L

L

L

L

L

B

B

B

B

B

B

L

L

B

B

B

B

Mode

60

60

30

30

30

30

110

110

110

60

60

30

30

30

30

0

0

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023

BCS1023




This course is introducing Formal Methods, which can be used in developing software specification. Formal Method is the software specification language that is used to ensure the software or system to be developed is being validated before it is actually deployed. Therefore, bugs can be detected at early stages in order to reduce the cost of the development. Formal Methods language to be introduced is Z notation or any language related to Formal Methods

This course presents an introduction to software engineering concepts including: software engineering paradigms, requirements specification, functional design, object-oriented design, software verification, and maintenance.

This course introduces the essential topics of Internet programming & development of web-based applications. Students are required to develop a web/Internet application which connected to the database.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BCS2313

BCS2343

Code

ARTIFICIAL INTELLIGENCE TECHNIQUES

SOFTWARE DESIGN WORKSHOP

Course Name

01

01

01A

01A

01B

01B

01

01

01

01

01

01

02

02

02

02

02

02

03

03

03

03

03

03

04

04

04

04

04

04

Sec

MON

MON

THU

THU

FRI

FRI

MON

MON

MON

WED

WED

WED

TUE

TUE

TUE

FRI

FRI

FRI

MON

MON

MON

THU

THU

THU

TUE

TUE

TUE

FRI

FRI

FRI

Day

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

Y-DK-05

Y-DK-05

FSK15

FSK15

FSK15

FSK15

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

Loc

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

30

30

30

30

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333

BCS2333


ELECTIVE FOR BCN & BCGThis course introduces student to the theory and practice of the Artificial Intelligence (AI). Student are expose to the main artificial intelligence concept currently most applied in application such as Artificial Neural Networks(ANN), Fuzzy Logics(FL), Genetic Algorithms(GA) and Expert Systems(ES). Practical examples of how artificial intelligence is applied to commercial, scientific and consumer applications will be covered.

This course introduces the students how to develop software development documents ¿Software Design Description (SDD) and their system development process. Continue from previous project/problems (from course BCS2293 Software Planning & Requirement Workshop), students must produce Software Design Description document.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BCC3031

BCI3913

BCM2063

Code

RESEARCH METHODOLOGY

STRUCTURED QUERY LANGUAGE

IMAGE PROCESSING

Course Name

01

02

03

01

01

01

01

02

02

01

01

01A

01A

01B

01B

Sec

TUE

WED

FRI

TUE

TUE

TUE

TUE

WED

WED

TUE

TUE

WED

WED

FRI

FRI

Day

16:00-16:50

10:00-10:50

08:00-08:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

Y-DK-02

Y-DK-02

Y-DK-02

Y-DK-04

Y-DK-04

FSK1

FSK1

FSK1

FSK1

Y-DK-05

Y-DK-05

FSK15

FSK15

FSK15

FSK15

Loc

L

L

L

L

L

B

B

B

B

L

L

B

B

B

B

Mode

90

90

90

30

30

30

30

0

0

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCI2023

BCI2023

BCI2023

BCI2023

BCI2023

BCI2023


ELECTIVE FOR ALL PROGRAM

CORE PROGRAM FOR BCG, ELECTIVE FOR BCS & BCN ONLY

This course provides an introduction to a research methods used in Computer Science field.Students are taught to follow the process of conducting research including understanding research background and scope, conducting the literature review, data sampling, collection, analysis, research methodology and interpretation using various approaches and tools. The students need to focus on the following issues: the nature of research and research processes, an appropriate research method, the essential stages in planning a research project, literature survey and the using of statistical technique to analyze research data. At the end of the semester, students are required to complete a research proposal and a proposal overview.

Understanding the basic concepts of relational databases ensure refined code by developers. This course helps the participants to write subqueries, combine multiple queries into a single query using SET operators and report aggregated data using group functions. Controlling privileges at the object and system level are also dealt with in detail.

This course covers creating indexes and constraints, and altering existing schema objects. Additionally, participants learn how to create and query external tables. In order to query andmanipulate data within the database, to use the dictionary views to retrieve metadata and create reports about their schema objects, participants get to understand the advanced features of SQL. Some of the date-time functions available in the Oracle Database are also covered. This course also discusses how to use the regular expression support in SQL.

This course discusses about the processing of digital images. The techniques covers are reading image enhance the image quality and manipulate the image. Several image processing methods will be touch in this course. Programming skill and creativity is a required whereby students¿ are compulsory to do one related project in order to complete this course.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BCM2073

BCM3103

BCM3113

Code

MODELING & SIMULATION

VIRTUAL REALITY

3D MODELLING

Course Name

01

01

01A

01A

01B

01B

01C

01C

01

01

01A

01A

01B

01B

01

01

01A

01A

01B

01B

Sec

MON

MON

TUE

TUE

THU

THU

THU

THU

TUE

TUE

WED

WED

FRI

FRI

THU

THU

WED

WED

FRI

FRI

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

Y-DK-04

Y-DK-04

FSK14

FSK14

FSK14

FSK14

FSK14

FSK14

Y-BK-04

Y-BK-04

FSK14

FSK14

FSK14

FSK14

FSK15

FSK15

FSK14

FSK14

FSK14

FSK14

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

60

60

30

30

30

30

0

0

60

60

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


This course will discuss on general knowledge and a few techniques of the simulation. Topics to be covered are introduction to simulation, a few examples of simulation system, general principles in simulation, techniques to develop simulation system, how to analyze input and output, how to verify and validate the models and comparison and validation of alternatives system design. Students are expected to equip themselves with adequate skill of modeling and simulation.

This module introduces the concepts of virtual reality and enables the students to gain hands-on experience by developing their own applications.

The focus of the course is on 3D design and modeling. Students are introduced to 3D design and modeling methods such as modeling with NURBS, polygons, and subdivision surfaces. Basic rendering consepts are also discussed. Production pipeline issues such as geometry deformation and level of detail are emphasized.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BCM3123

BCM3192

Code

DATA VISUALIZATION

PROJECT PLANNING & REQUIREMENT WORKSHOP

Course Name

01

01

01A

01A

01B

01B

01

01

01

01

01

01

02

02

02

02

02

02

03

03

03

03

03

03

Sec

THU

THU

MON

MON

TUE

TUE

MON

MON

MON

WED

WED

WED

WED

WED

WED

THU

THU

THU

MON

MON

MON

WED

WED

WED

Day

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

Y-DK-05

Y-DK-05

FSK15

FSK15

FSK15

FSK15

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Loc

L

L

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

60

60

30

30

30

30

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


Topics include the introduction to data visualization. It focuses on the visualization techniques and method that have a broad applicability in visualization applications. This course also covers the dataset concept by describing the most frequently used types of datasets in visualization. Students will be exposed to the various data processing stages that form the visualization process: data acquisition, data filtering, data mapping and rendering.

This course is about software standard documentations throughout the system development especially for multimedia-based project.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BCN2023

BCN2093

BCN3023

Code

DATA & NETWORK SECURITY

NETWORK ANALYSIS & DESIGN

NETWORK MANAGEMENT

Course Name

01

01

01A

01A

01B

01B

01

01

01A

01A

01B

01B

01C

01C

01

01

1A

1A

1B

1B

1C

1C

Sec

MON

MON

THU

THU

THU

THU

WED

WED

FRI

FRI

FRI

FRI

THU

THU

FRI

FRI

MON

MON

WED

WED

MON

MON

Day

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

Y-DK-05

Y-DK-05

FSK4B

FSK4B

FSK5

FSK5

Y-DK-04

Y-DK-04

FSK12

FSK12

FSK12

FSK12

FSK12

FSK12

Y-DK-05

Y-DK-05

FSK12

FSK12

FSK12

FSK12

FSK12

FSK12

Loc

L

L

B

B

B

B

L

L

B

B

B

B

B

B

L

L

B

B

B

B

B

B

Mode

60

60

30

30

30

30

60

60

30

30

30

30

0

0

60

60

30

30

30

30

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The course introduces fundamental of security. Every chapter will explain security concepts, fundamentals, purpose, implementation and discussion in their respective areas related to data and network security. Topics include: Introduction to security, cryptographic tools, user authentication and access control, security in networks, intrusion detection systems, firewalls and intrusion prevention systems and wireless security.

This course focuses on analysis and design of enterprise networks that are reliable, secure and manageable. It includes top-down network design methodology to design networks that meet customer¿s business and technical goals, analyzationof business and technical requirements, examine traffic flow and Quality of Service (QoS) requirements, and production of RFP documentation with relevant procedure steps for case study/project to fulfil this subject requirement.

This course introduces the overview of network management to familiarize student with network management systems and the five areas of network management. Student will learna practical means of desigining and evaluating a network management system for particular networking environment. Student also equipped with the example of simple, complex and advanced tools for each category of network management so that they could determine that a particular functionality would be useful and might want to pursue its development.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BCN3103

BCN3113

BCN3183

Code

Z/OS BASIC FOR ENTERPRISE COMPUTING

ETHICAL HACKING

INTERNET TECHNOLOGY

Course Name

01

01

01

01

01

01

01

01A

01A

01

01

01A

01A

01B

01B

Sec

WED

WED

FRI

FRI

FRI

WED

WED

TUE

TUE

WED

WED

THU

THU

THU

THU

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

Time

Y-DK-04

Y-DK-04

FSK12

FSK12

FSK12

Y-DK-03

Y-DK-03

FSK12

FSK12

Y-DK-05

Y-DK-05

FSK12

FSK12

FSK12

FSK12

Loc

L

L

B

B

B

L

L

B

B

L

L

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCN3083

BCN3083

BCN3083

BCN3083

BCN3083




The course provides students with basic computer programming and reporting for file-oriented, computerized information systems utilizing the COBOL language. The student will be able to explain the MVS concepts including how data are stored in mainframe environment. Students will learn basic JCL statements which include creating new data sets, referencing existing data sets, condition code testing, applies IF/THEN/ELSE/ENDIF constructs, use symbolic parameters in procedures as well use selected utility programs.

This course will immerse the student into an interactive environment where they will be shown how to scan, test, hack and secure their own systems. The lab intensive environmentgives each student in-depth knowledge and practical experience with the current essential security systems. Students will begin by understanding how perimeter defenses work and then be lead into scanning and attacking their own networks, no real network is harmed. Students then learn how intruders escalate privileges and what steps can be taken to securea system.

This course is designated to expose the student about Active Directory Technology Specialists including how to implement and configure secure network access and implementfault tolerant storage technologies, understand the network technologies, most commonly used and IP-enabled network, and how to secure servers and maintain update compliance.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BCN3203

BCS2173

Code

WAN TECHNOLOGY

HUMAN COMPUTER INTERACTION

Course Name

01

01

01A

01A

01A

01B

01B

01B

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

Sec

MON

MON

TUE

TUE

TUE

FRI

FRI

FRI

THU

THU

FRI

FRI

FRI

FRI

TUE

TUE

THU

THU

FRI

FRI

Day

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

Time

Y-DK-04

Y-DK-04

FSK2

FSK2

FSK2

FSK2

FSK2

FSK2

Y-DK-04

Y-DK-04

FSK10B

FSK10B

FSK9

FSK9

Y-DK-04

Y-DK-04

FSK9

FSK9

FSK9

FSK9

Loc

L

L

B

B

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

0

0

0

0

0

0

0

0

60

60

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053

BCN1053


ELECTIVE FOR BCN ONLY

This course discusses the WAN technologies and network services required by converged applications in enterprise networks. The course uses the Cisco Network Architecture to introduce integrated network services and explains how to select the appropriate devices and technologies to meet network requirements. Students learn how to implement and configure common data link protocols and how to apply WAN security concepts, principles oftraffic, access control and addressing services. Finally, students learn how to detect, troubleshoot and correct common enterprise network implementation issues.

This course provides an introduction to Human-Computer Interaction (HCI). HCI is concerned with understanding, designing, implementing and evaluating user-interfaces so that the students have better support users in carrying out their tasks. On completing this course, the students will have knowledge of the theoretical foundations of designing for interaction between humans and computers. They will also have practical experience in implementing and evaluating graphical user interfaces.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

Year

BCS2333

BCS3263

Code

SOFTWARE PLANNING & REQUIREMENT WORKSHOP

SOFTWARE QUALITY ASSURANCE

Course Name

01

01

01

01

01

01

02

02

02

02

02

02

03

03

03

03

03

03

01

01

01A

01A

01B

01B

Sec

MON

MON

MON

WED

WED

WED

TUE

TUE

TUE

FRI

FRI

FRI

MON

MON

MON

THU

THU

THU

MON

MON

MON

MON

TUE

TUE

Day

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10

FSK10

FSK10

FSK10B

FSK10B

FSK10B

FSK10B

FSK10B

FSK10B

Y-DK-05

Y-DK-05

FSK9

FSK9

FSK9

FSK9

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Exam

BCS1133

BCS1133

BCS1133

BCS1133

BCS1133

BCS1133


This course exposes the student to software project planning and software requirement stages. It will concentrate on analysis of options and risks, configuration management plan and project planning, discovering and eliciting requirements techniques, languages and models for representing requirements, requirement documentation standard, handling requirement changes and writing Software Development Plan (SDP) document and SoftwareRequirement Specifications (SRS) customize from DOD and IEEE standard.

This course introduces students to the concept of Software Quality Assurance (SQA) including principles, component, process, models, standards and certification of SQA. Students are required to understand the relationship between software quality assurance and software engineering.



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

Campus

DEGREE

Level

3

Year

BCS3323

BCM2083

BCM3143

BCM3173

Code

SOFTWARE TESTING & MAINTENANCE

MULTIMEDIA DATA PROCESSING

COMPUTER GAME PROGRAMMING

GEOGRAPHICAL INFORMATION SYSTEM

Course Name

01

01

01A

01A

01B

01B

01

01

01A

01A

01B

01B

01

01

1A

1A

1B

1B

01

01

01A

01A

Sec

THU

THU

TUE

TUE

THU

THU

TUE

TUE

TUE

TUE

WED

WED

TUE

TUE

TUE

TUE

WED

WED

TUE

TUE

TUE

TUE

Day

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

Time

Y-DK-05

Y-DK-05

FSK10

FSK10

FSK1

FSK1

Y-DK-04

Y-DK-04

FSK15

FSK15

FSK15

FSK15

Y-DK-04

Y-DK-04

FSK15

FSK15

FSK15

FSK15

Y-BK-04

Y-BK-04

FSK5B

FSK5B

Loc

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

B

B

L

L

B

B

Mode

60

60

30

30

30

30

60

60

30

30

30

30

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCS1133

BCS1133

BCS1133

BCS1133

BCS1133

BCS1133


ELECTIVE FOR BCG & BCN

ELECTIVE FOR BCG

ELECTIVE FOR ALL

This course is designed to provide students with indepth knowldege on software testing and its test process. The course covers the basic principles of software testing and test activities that include the test plan, test design, monitoring, implementation and test closure. The student will also learn various categories of test design techniques and methods used in both black-box and white-box testing. At the end of this course, students should be able to recognize various types and levels of testing as well as categorizing and applying software testing process & techniques.

-

This course will expose students to the theoretical and fundamental concepts of computer game programming. Topics to be covered include game architecture (content, mechanics and technology), 3D in game (coordinates, cameras and objects), game engine (engine differences across genres, etc.), runtime engine architecture (hardware, drivers, OS, middleware, core systems, rendering engine, collison and physics, online multiplayer, gameplay, tools and asset pipeline, etc.), game AI (game AI vs academic AI, etc.), AI engine, game AI across genres and other sub topics that contributed to the development of game application.

-



13-AUG-12 03:07 PM

FSKKP

Faculty

GAMBANG

NO TIMETABLE

Campus

DEGREE

DEGREE

Level Year

BCM3193

BCN3193

BCS3113

Code

PROJECT PLANNING & REQUIREMENT WORKSHOP

COMPUTER FORENSICS & INVESTIGATION

ZEND PHP FOUNDATIONS

Course Name

01

01

01

01

01

01

02

02

02

02

02

02

03

03

03

03

03

03

01

01

01

01

01

01

01A

01A

01B

01B

Sec

MON

MON

MON

WED

WED

WED

WED

WED

WED

THU

THU

THU

MON

MON

MON

WED

WED

WED

MON

MON

THU

THU

TUE

TUE

THU

THU

WED

WED

Day

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

Time

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

FSK9

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Y01-1012

Y-BK-04

Y-BK-04

FSK12

FSK12

Y-BK-05

Y-BK-05

FSK4B

FSK4B

FSK4B

FSK4B

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

B

B

L

L

B

B

B

B

Mode

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BCS2303

BCS2303

BCS2303

BCS2303

BCS2303

BCS2303


ELECTIVE FOR BCG

ELECTIVE FOR ALL

-

The primary focus of this course is to give students instruction in the principle knowledge of Computer Forensics, and the need to be observed by the computer forensic investigator in order to successfully identify, secure, analyse and present digital evidence. This course will enable students to relate the principle and practice of computer forensic, which builds on that foundation simultaneosly enhance the skills of the IT security professional.

-



13-AUG-12 03:07 PM

FSKKP

Faculty

NO TIMETABLE

Campus

DEGREE

Level

3

3

3

4

4

Year

BCC3012

BCC3013

BCC3024

BCC4018

BCC4024

BCS3413

Code

UNDERGRADUATE PROJECT I

UNDERGRADUATE PROJECT 1

UNDERGRADUATE PROJECT II

INDUSTRIAL TRAINING


INTRODUCTION TO INTEGRATED BUSINESS PROCESS WITH SAP

Course Name

01

01

02

03

01

02

03

01

01

01


30

90

90

90

90

0

0

300

300

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

Y

Exam

BCS1133


This course aim to give chances for the student to practice and apply their knowledge and skills that they gain during their study in the university. Student will learn to identify problem, analyze the problem, give general solution, collect the required data regarding specific solution and do research on the solution. Finally student will be able to produce report proposal and solve the problem identified. During the course, student will be supervised by their supervisor in order to guide and monitor the students? project progress and to ensure that they can achieve the course objective.

This course aim to give chances for the student to practice and apply their knowledge and skills that they gain during their study in the university. Student will learn to identify problem, analyze the problem, give general solution, collect the required data regarding specific solution and do research on the solution. Finally student will be able to produce report proposal and solve the problem identified. During the course, student will be supervised by their supervisor in order to guide and monitor the students¿ project progress and to ensure that they can achieve the course objective.

This course aim to give chances for the student to practice and apply their knowledge and skills that they gain during their study in the university. Student will learn to identify problem, analyze the problem, give general solution, collect the required data regarding specific solution and do research on the solution. Finally student will be able to produce report proposal and solve the problem identified. During the course, student will be supervised by their supervisor in order to guide and monitor the students¿ project progress and to ensure that they can achieve the course objective.

This course aim to give chances for the student to practice and apply their knowledge and skills that they gain during their study. During the placement, we expect students to keep a log book, in which they make regular entries describing the work they are undertaking. Student also supervised by industrial and university supervisor to guide and ensure that theycan do their work as good as possible and achieved the objective for this course.

During the placement, we expect students to keep a log book, in which they make regular entries describing the work they are undertaking. Then, student need to provide industrial training report to describe their technical and personal development during their placement. The industrial training report need to hand in to the university supervisor. Students also needto do final presentation for assessment.

-




13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

1

Year

BSB1102

BSB1113

BSB1122

BSB1133

BSB1163

Code

BIOPHYSICAL CHEMISTRY

BIOCHEMISTRY

GENETICS

ORGANIC CHEMISTRY

CELL AND MOLECULAR BIOLOGY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

FRI

FRI

MON

MON

TUE

TUE

THU

TUE

TUE

THU

Day

12:00-12:50

13:00-13:50

14:00-14:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

09:00-09:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

W-DK-12

W-DK-12

W-DK-13

W-DK-18

W-DK-18

W-DK-12

W-DK-12

W-DK-14

W-DK-14

W-DK-14

W-DK-12

W-DK-12

W-DK-12

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1402/BIOCHEMISTRY LAB

SUBJEK INI PERLU DIAMBIL OLEH PELAJAR SESI 2011/2012 SAHAJA DENGAN MENGGUNAKAN KOD INI

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1412/ORGANIC CHEMISTRY LAB

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1422/CELL AND MOLECULAR BIOLOGY LAB

The goal of this course is to emphasize the principle and biochemical calculation that are commonly used in biological studies including preparation of buffers and solutions, acids and bases chemistry, aqueous ionic equilibrium, bioenergetics and kinetics.

This course is designed to study the physical and biochemical characteristics of biomolecules including nucleic acids, amino acids and proteins, carbohydrates and lipids. Important pathways for biosynthsis and degradation of nucleic acids, amino acids, proteins, carbohydrates and lipids will be discusssed. Production of energy from carbohydrates, lipids and other metabolites will also be discussed. Besides that, the principles of cellular signalling in living organisms will also be described in this course.

The course will provide the students with a strong background in the basic concepts of genetics. Students will be introduced to the brief history pertaining to genetics, cell division and chromosomes. Apart from that, the students will be exposed to the Mendelian Law of Inheritance, gene interaction including epistasis, sex lingkage and determination, crossing, inbreeding, hetrosis and environmental effect on genetics. Other topics to be discussed include genetic application and mechanism in race and species diversification formation. Population genetics and evolutionary genetics will also be discussed.

In this course you will be introduced to the fundamental principles of organic chemistry. Structure, properties and stereochemistry of organic molecules and basic organic reactions to prepare common functional groups will be studied.

This course discusses fundamental concepts of cell biology, structure and function of cellular organelles and its their biomolecules. Emphasis will be given on compositions, structures and functions of cell membrane and concepts of cell division. Concepts of central dogma of molecular biology and gene regulation and its control are also discussed. Discussion includes techniques and applications of molecular biology such as DNA recombinant technology, gene cloning application and bioinformatics analysis.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

1

Year

BSB1402

BSB1412

BSB1422

BSF1212

BSK1103

Code

BIOCHEMISTRY LABORATORY

ORGANIC CHEMISTRY LABORATORY

CELL AND MOLECULAR BIOLOGY LABORATORY

LABORATORY SAFETY MANAGEMENT

ORGANIC CHEMISTRY I

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

FRI

FRI

FRI

FRI

FRI

FRI

WED

WED

WED

TUE

TUE

WED

WED

THU

Day

15:00-15:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

Time

FIST-L-BC

FIST-L-BC

FIST-L-BC

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-14

Loc

B

B

B

B

B

B

B

B

B

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

97

97

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1113/BIOCHEMSITRY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1133/ORGANIC CHEMISTRY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB1163/CELL AND MOLECULAR BIOLOGY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK1402/ORGANIC CHEMISTRY LAB

The course introduces student with the basic calculation and techniques that are commonly used in a biochemical lab. The principle of spectrophotometry and the application of spectrophotometry in biochemistry. Several quantitative and qualitative tests on important biomolecules such as Lowry assay, Bradford assay and DNS assay.

To expose the student to techniques, methods and data analysis via Basic Organic Experiments.

Objectives: 1) To expose students to conduct the basic experiments that cover organic chemistry 2) To illustrate and demonstrate the techniques employed in organic chemistry

In this course, students will be introduced and practice modern biotechnology laboratory techniques and theories. The subjects that will be covered are basic laboratory equipments handling and techniques such as nucleic acid isolation and purification, deoxyribonucleic acid (DNA) cloning, polymerase chain reaction (PCR) and gel electrophoresis analysis. In addition, students will be exposed to basic bioinformatic tools for analysis of genes.

This course exposes students to basic concepts of industrial and laboratory safety. Topics include quality systems (Good laboratory Practice and ISO/IEC 17025) for laboratory management, occupational health & safety and acts and related regulations. Students will be introduced to laboratory and industrial safety, laboratory and industrial accident, safety policy and procedure, emergency response plan, introduction to basic toxicology and first aid. The students also are exposed in writing a laboratory safety manual.

This course discuss the fundamental theory of properties, synthesis and organic reactions where use the functional group as framework as a basic for second level courses with an organic chemical content. This course focuses on the key concepts of organic chemistry through a study of the reactions of selected nonfunctional aliphatic, alicyclic, cyclic and aromatic molecules. Particular emphasis is placed on the underlying mechanistic pathways that are involved and their stereochemical consequences. The stereochemistry of the molecular structure is also considered. The development of key skills is facilitated by a program of tutorials and practical.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

Year

BSK1133

BSK1143

BSK1153

BSK1402

Code

PHYSICAL CHEMISTRY

INORGANIC CHEMISTRY 1

ANALYTICAL CHEMISTRY

ORGANIC CHEMISTRY LABORATORY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

TUE

TUE

TUE

TUE

THU

THU

FRI

FRI

MON

MON

MON

Day

12:00-12:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

17:00-17:50

15:00-15:50

16:00-16:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

V-BK-03

V-BK-03

V-BK-03

W-DK-15

W-DK-15

W-DK-15

W-DK-14

W-DK-15

W-DK-15

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

Loc

L

L

L

L

L

L

L

L

L

B

B

B

Mode

31

31

31

31

31

31

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK1103/ORGANIC CHEMISTRY I

The objective of this course is to provide students with a basic understanding of analytical chemistry, the science of chemical characterization and measurement. The courseis an introductory part of a series of analytical chemistry courses for industrial chemistry majors. It will concentrate upon escriptive analytical chemistry and analytical methods based on chemical equilibriums which include precipitation, volumetric and thermal analysis. A briefintroduction to instrumental methods, separation methods, instruments calibration and methods validation, process analytical chemistry as well as good laboratory practice will also be discussed.

This course provides a critical introduction to modern inorganic chemistry. Basic concepts ofinorganic chemistry, focusing largely on structure, periodicity and reactivity of inorganic substances are presented.Part I presents a balanced and critical account of the fundamentals of inorganic chemistry and their application to the systematic study of the elements and compounds. The first few weeks covers atomic structure, electronic configurations and physical properties of atoms and molecules, and the structures and energetics of inorganic solids. This is followed by a brief presentation on inorganic chemistry in aqueous media and in non-aqueous media.There follows in Part II, a systematic study of the elements and some of their compounds. This includes the systematic survey of descriptive inorganic chemistry of the main group elements (IA to VIIIA).Part III presents the chemistry of the solid state providing a glimpse at the practical uses of inorganic compounds and their industry.

The objective of this course is to provide students with a basic understanding of analytical chemistry, the science of chemical characterization and measurement. The courseis an introductory part of a series of analytical chemistry courses for industrial chemistry majors. It will concentrate upon escriptive analytical chemistry and analytical methods based on chemical equilibriums which include precipitation, volumetric and thermal analysis. A briefintroduction to instrumental methods, separation methods, instruments calibration and methods validation, process analytical chemistry as well as good laboratory practice will also be discussed.

Practical comprises several laboratory experiments related to organic chemistry. In organic chemistry experiments, students are exposed to melting point determination and mixture melting points, extraction, distillation, isolation andcrystallization.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

1

1

1

Year

BSK1412

BSK1422

BSK1432

BSP1103

BSP1113

BSP1123

BSP1133

Code

PHYSICAL CHEMISTRY LABORATORY

INORGANIC CHEMISTRY LABORATORY

ANALYTICAL CHEMISTRY LABORATORY

INORGANIC CHEMISTRY

PHYSICAL CHEMISTRY

PHYSICS I

ORGANIC CHEMISTRY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

TUE

WED

WED

WED

TUE

TUE

TUE

TUE

TUE

THU

MON

TUE

TUE

MON

MON

WED

TUE

TUE

THU

Day

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

12:00-12:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

15:00-15:50

09:00-09:50

Time

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-ACL

FIST-L-ACL

FIST-L-ACL

W-DK-15

W-DK-15

W-DK-15

V-BK-03

V-BK-03

V-BK-03

V-BK-03

V-BK-03

V-BK-02

W-DK-14

W-DK-14

W-DK-14

Loc

B

B

B

B

B

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

15

15

15

15

15

15

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK1113/PHYSICAL CHEMISTRY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK1123/INORGANIC CHEMISTRY I

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK1133/ANALYTICAL CHEMSITRY

Practical comprises laboratory experiments related to physical chemistry. Students will be exposed to chemical equilibrium, chemical kinetics, thermo-chemistry, electrochemistry and various experiments related to physical chemistry concepts

This course will provide the students a clear idea of the reactivity of the elements in different groups from 1A to VII A in the periodic table.

The objective of this course is to provide students with a basic skills of analytical chemistry field, the science of chemical characterization and measurement. The course is an introductory part of a series of analytical chemistry courses for industrial chemistry majors. It will concentrate upon escriptive analytical chemistry and analytical methods based on chemical equilibriums which include precipitation, volumetric and thermal analysis. A brief introduction to instrumental methods, separation methods, instruments calibration and methods validation, process analytical chemistry as well as good laboratory practice will also be practice in lab.

-

-

-

-



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

2

2

Year

BSP1143

BSP1153

BSP1402

BSP1412

BSB1172

BSB2102

Code

PHYSICS II

SOLID STATE PHYSICS I

PHYSICS I LABORATORY

PHYSICS II LABORATORY

GENETICS

BIOMATERIAL SCIENCE

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

MON

WED

WED

FRI

FRI

FRI

FRI

FRI

FRI

MON

MON

FRI

FRI

Day

13:00-13:50

14:00-14:50

16:00-16:50

16:00-16:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

09:00-09:50

10:00-10:50

Time

V-BK-03

V-BK-03

V-BK-03

V-BK-03

V-BK-02

V-BK-02

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

W-DK-12

W-DK-12

W-DK-12

W-DK-12

Loc

L

L

L

L

L

L

B

B

B

B

B

B

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

0

0

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Y

Y

Y

Y


SUBJEK INI PERLU DIAMBIL OLEH PELAJAR SESI 2010/2011 SAHAJA DENGAN MENGGUNAKAN KOD INI

-

-

-

-

The course will provide the students with a strong background in the basic concepts of genetics. Students will be introduced to the brief history pertaining to genetics, cell division and chromosomes. Apart from that, the students will be exposed to the Mendelian Law of Inheritance, gene interaction including epistasis, sex lingkage and determination, crossing, inbreeding, hetrosis and environmental effect on genetics. Other topics to be discussed include genetic application and mechanism in race and species diversification formation. Population genetics and evolutionary genetics will also be discussed.

This course covers basic knowledge in biomaterials, and their properties, and characterization techniques. This study also covers structure of solids such as atomic bonding, crystal structure, struture of polymers, supercooled and network solids and composite material structures. Within this framework of study, students will be introduced to types of materials such as metallic, ceramic, polymeric, composite and biological materials and characteristics of the materials such as mechanical, magnetic, electrical, thermal, optical, chemical and biological properties.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

2

Year

BSB2123

BSB2143

BSB2152

BSB2163

BSB2173

Code

INDUSTRIAL MICROBIOLOGY

ENZYME TECHNOLOGY

INDUSTRIAL BIOTECHNOLOGY

MICROBIOLOGY

BIOANALYTICAL CHEMISTRY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

WED

WED

FRI

WED

WED

FRI

THU

THU

MON

MON

FRI

TUE

TUE

THU

Day

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

10:00-10:50

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

13:00-13:50

14:00-14:50

Time

W-DK-12

W-DK-12

W-DK-12

W-DK-13

W-DK-13

W-DK-13

W-DK-12

W-DK-12

V-BK-01

V-BK-01

V-BK-01

W-DK-12

W-DK-12

W-DK-12

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

60

60

60

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BSB1143

BSB1143

BSB1143

BSB1113

BSB1113

BSB1113


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB2411/INDUSTRIAL MICROBIOLOGY LAB

SUBJEK INI PERLU DIAMBIL BERSAMA BSB2492/ENZYME TECHNOLOGY LABORATORY

KURSUS INI PERLU DIAMBIL SEKALI DEGAN BSB2432/MICROBIOLOGY LABORATORY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB2442/BIOANALYTICAL CHEMISTRY

This course introduces various industrial applications of microorganisms in traditional fermentation process and advanced contemporary applications such as productions of biological materials and vaccines, biopharmaceutical, bioemulsifier, biopolymers, and biodegradation. Discussion includes biotechnology unit operation, bioprocess design, process modulation, kinetics and analysis. In addition, students will be introduced to work flow and operation of an industry through a site-visit to a related industry.

This course provides the theory and knowledge relevant to the enzymology principles including fundamental properties of enzymes, enzyme catalytic mechanisms and enzyme kinetics. Techniques employed in enzymes purification and characterization are also emphasized in this course. Students will also be introduced to the theory as well as applications of enzyme technology in food, medical, and household industries. Finally this course serves to provide an awareness of the current and possible future applications of enzyme technologies.

-

-

This course introduces spectroscopic methods for matrix characterization, principles of electrophoresis, isoelectric focusing, capillary electrophoresis, centrifugation methods, chromatography and mass spectrometry of biomolecules.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

Year

BSB2432

BSB2442

BSB2492

BSB3123

Code

MICROBIOLOGY LABORATORY

BIOANALYTICAL CHEMISTRY LABORATORY

ENZYME TECHNOLOGY LABORATORY

BIOPROCESS TECHNOLOGY

Course Name

01

01

01

02

02

02

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

TUE

FRI

FRI

FRI

MON

MON

MON

MON

MON

MON

TUE

TUE

FRI

Day

10:00-10:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

09:00-09:50

Time

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-BC

FIST-L-BC

FIST-L-BC

FIST-L-ET

FIST-L-ET

FIST-L-ET

W-DK-13

W-DK-13

W-DK-13

Loc

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Exam

BSB2143

BSB2143

BSB2143

BSB2123

BSB2123

BSB2123


KURSUS INI PERLU DIAMBIL SEKALI DENGAN BSB2163/MICROBIOLOGY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB2173/BIOANALYTICAL CHEMISTRY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3481/BIOPROCESS TECHNOLOGY LAB

This course covers practical in experiments and analyses in microbiology laboratory. Emphasis on basic techniques in microscopy and staining, handling microorganisms (bacteria, fungi and yeast), including aseptic technique, media preparation, inoculation and isolation of pure culture. Analysis and control of microbial growth, and biochemical and morphological characterization, will also be carried out.

An introduction in theory, techniques and practical in modern protein biotechnology laboratory. Emphasis will be given in concept and technique on basic laboratory and instrumentation handling, purification process, protein electrophoresis and peptide sequencing.

An introduction in theory, techniques and practical in modern enzyme technology laboratory.Emphasis will be given in concept and technique on basic laboratory and instrumentation handling, extraction and purification process, and polyacrylamide gel electrophoresis for enzyme/protein separation.

The course discuss on the basic operational in bioprocess technology, unit, dimension, mass transfer at the equilibrium phase, stoichiometry of microbial growth and product formation as well. This course explicates the connection between microbial growth, product formation, mass transfer and environment. Likewise, this course gives an overview of the bioprocess from raw material to product. Upstream and downstream processing will be discussed. This course explains the processes and techniques used for extraction and purification of a product from culture medium. Also, bioprocess consideration in using animaland plant cell cultures will discuss using different techniques.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

2

Year

BSB3481

BSF2222

BSF2223

BSF2232

BSK2002

Code

BIOPROCESS TECHNOLOGY LABORATORY

LABORATORY QUALITY MANAGEMENT

TESTING & CALIBRATION METHODS

QA & QC FOR TESTING LABORATORY

BUSINESS ORGANIZATION SKILL

Course Name

02

02

02

01

01

01

01

01

01

01

01

01

01

Sec

THU

THU

THU

FRI

FRI

WED

THU

THU

TUE

TUE

THU

MON

MON

Day

15:00-15:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

12:00-12:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

14:00-14:50

08:00-08:50

09:00-09:50

Time

FIST-L-BP

FIST-L-BP

FIST-L-BP

W-DK-14

W-DK-14

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DK-15

W-DK-15

Loc

B

B

B

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

60

60

30

30

30

50

50

50

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BUM2123BSU1013BUM2123BSU1013BUM2123BSU1013


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3123/BIOPROCESS TECHNOLOGY

KOD KURSUS INI DIAMBIL BAGI SESI PENGAMBILAN BERMULA 2011/2012

KOD KURSUS INI DIAMBIL BERMULA SESI PENGAMBILAN 2011/2012 SAHAJA

KOD KURSUS INI AKAN DIAMBIL SESI PENGAMBILAN BERMULA 2011/2012 SAHAJA

Bioprocess technology laboratory course deals with and cover the extraction and bioseparation of different microbial industrially important by products. The course will be given on different techniques of mini-project for preparing and drawing the microbial growth curve. Also, mini project will cover the bioprocesses for citric acid production from different microbial isolates including acid production, extraction, titration, quantification, precipitation and filtration.

-

This course serves as an introduction to testing and calibration in accordance to ISO/IEC 17025. We will discuss the rationale behind testing and calibration, and the factors that affect the need to test and calibrate measurement equipments. One should always make sure that the data produced by the measurement equipment is reliable and accurate. Naturally the equipment must be fit for the purpose and used in such appropriate and suitable way. It will concentrate upon calibration and testing of measurement equipments as an operation that relates an output quantity to an input quantity for measuring system under given conditions. Discussion on the relationships among metrology, calibration, and quality control will be emphasized. An introduction to uncertainty and traceability will be discussed. Finally, fundamentals of single component calibration and multispecies calibration as well aspractical aspects of calibration will be presented.

-

-



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

2

Year

BSK2113

BSK2123

BSK2133

BSK2183

BSK2193

Code

ORGANIC SPECTROSCOPY

MATERIAL CHEMISTRY

SEPARATION TECHNIQUE

THERMODYNAMICS

INSTRUMENTATION METHOD

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

TUE

MON

MON

WED

MON

MON

FRI

MON

MON

TUE

TUE

TUE

THU

Day

16:00-16:50

17:00-17:50

16:00-16:50

10:00-10:50

11:00-11:50

10:00-10:50

10:00-10:50

11:00-11:50

10:00-10:50

16:00-16:50

17:00-17:50

16:00-16:50

14:00-14:50

15:00-15:50

15:00-15:50

Time

W-DK-14

W-DK-14

W-DK-14

W-DK-15

W-DK-15

W-DK-15

W-DK-14

W-DK-14

W-DK-16

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-15

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

90

90

90

60

60

60

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BSK2452

BSK2452

BSK2452

BSK1113

BSK1113

BSK1113

BSK1153

BSK1153

BSK1153


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK2441/ORGANIC SPECTROCOPY LAB

KOD KURSUS INI DIGUNAKAN BAGI PENGAMBILAN BERMULA SESI 2011/2012 KE ATAS DAN KURSUS INI PERLU D

BAGI KOD KURSUS INI DIGUNAKAN BERMULA SESI PENGAMBILAN 2011/2012 SAHAJA

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK2431/INSTRUMENTATION METHOD LAB

The course introduces the interaction of electromagnetic radiation with molecules and the use of such interactions to elucidate structures of unknown compounds. Visible radiation absorption-based quantitative analyses will be stressed. Aspects of instrumentation and spectral interpretation will be covered for the following spectroscopic techniques: UV/Vis,IR, MS (& GC-MS) and NMR. Lesser used techniques such as ESR are briefly mentioned. The development of key skills is facilitated by a programme of tutorialsand practical.

-

-

This course discusses thermodynamics in greater detail. Changes in physical properties will be extensively discussed in each law of thermodynamics. A special emphasis will be placed on the basic concepts of work, heat, internal energy, heat capacity and enthalpy changes in First Law of Thermodynamic. In the Second Law, entropy changes in reversible and irreversible processes will be discussed. Absolute entropy will be discussed in Third Law. Also discussed in this course is thermal equilibrium in the Zeroth Law, principles and applications of ionic interactions and electrochemical systems.

The course is designed to introduce the modern instrumental methods that are used to solveanalytical problems in chemistry. A qualitative and quantitative analysis which is studied in Analytical Chemistry course will be further developed. The course will begin with the explanation of instrumentation methods concept and the tools of quantitative analysis. Students will expose to spectroscopy (AAS, AES, MS, UV/VIS, FTIR, X-RAY, and NMR) anddeals with the methods of electroanalytical chemistry and radiochemical.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

Year

BSK2431

BSK2441

BSK2442

BSK2452

Code

INTRUMENTATION METHOD LABORATORY

ORGANIC SPECTROSCOPY LABORATORY

INSTRUMENTATION METHOD LABORATORY

MATERIAL CHEMISTRY LABORATORY

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

01

01

01

Sec

TUE

TUE

TUE

TUE

TUE

TUE

FRI

FRI

FRI

FRI

FRI

FRI

TUE

TUE

TUE

FRI

FRI

FRI

TUE

TUE

TUE

MON

MON

MON

Day

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-ACL

FIST-L-ACL

FIST-L-ACL

FIST-L-ACL

FIST-L-ACL

FIST-L-ACL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-IOCL

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

1

30

1

30

1

30

0

30

0

30

0

30

0

0

0

30

30

30

29

29

29

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK2193/INSTRUMENTATION METHOD

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK2113/ORGANIC SPECTROCOPY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK2193/INSTRUMENTATION METHOD

Students will conduct experiments involving techniques, methods, investigations, and data collection using instruments such as UV/Vis spectrophotometer, gas chromatography (GC), gas chromatography mass spectrometry (GC-MS), ion chromatography (IC), high performance liquid chromatography (HPLC), atomic absorption and emission spetrometry (AAS, AES), and fourier transform infrared spectroscopy (FTIR). Emphasis in on analyses ofsamples as conducted in industrial laboratories.

The aim of this course is to provide students with a basic understanding of spectroscopic analysis suitable for the determination of the structure of organic molecules. The course will concentrate upon the most commonly used techniques in organic structure determination, i.e. infrared spectroscopy (IR), ultraviolet-visible (UV-Vis) spectroscopy and gas-chromatography-mass spectrometry (GC/MS). The amount of time devoted to each technique in this course is meant to be representative of their current usage for structure determination

-

-



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

Year

BAM3022

Code

STATISTICS

Course Name

02

02

02

03

03

03

04

04

04

05

05

05

06

06

06

07

07

07

08

08

08

09

09

09

10

10

10

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

09:00-09:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

13:00-13:50

13:00-13:50

13:00-13:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


MENGIKUTI KELAS BUM2413 (SEKSYEN 01- 10) KOHORT LAMA ATAU DIRECT ENTRY KE TAHUN 2 SESI 2010/2011 KEB




13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

Year

BPF3313

Code

STATISTICS

Course Name

01G

01G

01G

02G

02G

02G

03G

03G

03G

04G

04G

04G

05G

05G

05G

06G

06G

06G

07G

07G

07G

08G

08G

08G

09G

09G

09G

10G

10G

10G

Sec

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

MON

TUE

THU

Day

08:00-08:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

09:00-09:50

10:00-10:50

10:00-10:50

10:00-10:50

11:00-11:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

13:00-13:50

13:00-13:50

13:00-13:50

14:00-14:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

16:00-16:50

17:00-17:50

17:00-17:50

17:00-17:50

Time

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

W-DK-17

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y





13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

3

Year

BSB1162

BSB2183

BSB2471

BSB3133

BSB3143

Code

ELECTRONIC FOR INSTRUMENTATION

EXTRACTION AND BIOSEPARATION TECHNOLOGY

BIOSENSOR AND BIOINSTRUMENTATION LABORATORY

BIOMATERIAL AND BIOMANUFACTURING

GENE TECHNOLOGY

Course Name

01

01

01

01

01

01

01

01

02

02

02

01

01

01

01

01

01

Sec

MON

MON

MON

MON

TUE

MON

MON

MON

MON

MON

MON

MON

WED

WED

TUE

TUE

FRI

Day

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

16:00-16:50

09:00-09:50

10:00-10:50

11:00-11:50

15:00-15:50

16:00-16:50

17:00-17:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

Time

W-DK-13

W-DK-13

W-DK-12

W-DK-12

W-DK-12

FIST-L-BP

FIST-L-BP

FIST-L-BP

FIST-L-BP

FIST-L-BP

FIST-L-BP

W-DK-16

W-DK-12

W-DK-12

W-DK-13

W-DK-13

W-DK-13

Loc

L

L

L

L

L

B

B

B

B

B

B

L

L

L

L

L

L

Mode

35

35

45

45

45

30

30

30

30

30

30

46

46

46

46

46

46

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Exam

BSB3123

BSB3123

BSB3123

BSB2172

BSB2172

BSB2172


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3421/EXTRACTION AND BIOSEPARATION TECHNOLOGY L

KHAS UNTUK PELAJAR TAHUN 4 SAHAJA DAN DIAMBIL SEKALI DENGAN BSB2112/BIOSENSOR

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3411/BIOMATERIAL AND BIOMANUFACTURING LAB

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3431/GENETECHNOLOGY LAB

Electronic for instrumentation will cover about basic concepts in several fields of electrical engineering. It discusses analog components such as resistor, capacitors and inductors. It then goes on to basic circuit ananlysis, ampliifiers and filters. From this, it moves to digital domain, which include converters, sampling theory and digital signal processing.

This course introduces the basic principle of extraction, separation and purification of bioproducts together with theory and principle of related separation instrument. In extraction parts, students will be exposed on extraction methods of nucleic acids, proteins and metabolic compounds. While in bioseparation parts, students will be exposed on separation and purification principles, techniques including separation by liquid chromatography, filtration, precipitation, sedimentation, crystallization and drying process.

-

This course covers basic knowledge in biomaterials, and their properties, and characterization techniques. This study also covers structure of solids such as atomic bonding, crystal structure, struture of polymers, supercooled and network solids and composite material structures. Within this framework of study, students will be introduced to types of materials such as metallic, ceramic, polymeric, composite and biological materials and characteristics of the materials such as mechanical, magnetic, electrical, thermal, optical and chemical properties. Students will be exposed to biomanufacturing workflow, Good Manufacturing Practices concept, designs and validation of facilities.

Topics discussed include the advanced techniques in gene technology including application of polymerase chain reaction (PCR) and real-time PCR, recombinant technology, genomic and cDNA libraries, molecular markers, DNA hybridization, functional genomic and genetic engineering in plants and animals. This course emphasize on the application of gene technology in agriculture, medical and forensic. Students are also trained to participate in group discussion and present on the application of gene technology and related ethical issues



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BSB3411

BSB3421

BSB3431

Code

BIOMATERIAL AND BIOMANUFACTURING LABORATORY

EXTRACTION AND BIOSEPARATION TECHNOLOGYLABORATORY

GENE TECHNOLOGY LABORATORY

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

02

02

02

Sec

THU

THU

THU

FRI

FRI

FRI

WED

WED

WED

THU

THU

THU

THU

THU

THU

TUE

TUE

TUE

Day

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

15:00-15:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

FIST-L-ET

FIST-L-ET

FIST-L-ET

FIST-L-ET

FIST-L-ET

FIST-L-ET

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

FIST-L-MB

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

20

20

20

30

30

30

25

25

25

20

20

20

25

25

25

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3133/BIOMATERIAL AND BIOMANUFACTURING

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB2183/EXTRACTION AND BIOSEPARATION TECHNOLOGY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3143/GENETECHNOLOGY

In this course, students will learn how to fabricate the thin films, how to fabricate the nanofibres of hydrogels and also learn the pricniples of UV-Vis absorption spectroscopy. These experiments will enahance their knowledge in the area of bio-medical applications. In biomanufacturing, case they report key concepts used in biomanufacturing industry.

This course exposes students the principle of extraction, separation and purification of bioproducts together with related separation instrument. In extraction parts, students will be exposed on extraction methods of nucleic acids, proteins and metabolic compounds. While in bioseparation parts, students will be exposed on separation and purification techniques.

Students will be exposed to the techniques in gene technology such as molecular markers (RAPD and ISSR), manipulation of constructed cDNA library, Expressed Sequence Tags (ESTs) development, gene detection and analysis using real-time PCR, and non-halal detection using real-time PCR. Students will also be exposed to the application of bioinformatics softwares for gene analysis.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BSB3441

BSB3613

BSB3623

BSB3643

Code

PLANT AND MAMMALIAN CELL TECHNOLOGY LABORATORY

IMMUNOTECHNOLOGY

TRANSGENIC TECHNOLOGY

VACCINE TECHNOLOGY

Course Name

01

01

01

02

02

02

01

01

01

01

01

01

01

01

01

Sec

FRI

FRI

FRI

TUE

TUE

TUE

MON

MON

TUE

TUE

TUE

THU

WED

WED

FRI

Day

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

Time

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

FIST-L-MCB

V-BK-01

V-BK-01

V-BK-01

V-BK-01

V-BK-01

V-BK-01

V-BK-01

V-BK-01

V-BK-01

Loc

B

B

B

B

B

B

L

L

L

L

L

L

L

L

L

Mode

25

25

25

20

20

20

47

47

47

30

30

30

45

45

45

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BSB1143

BSB1143

BSB1143

BSB2172

BSB2172

BSB2172

BSB1143

BSB1143

BSB1143


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3163/PLANT AND MAMMALIAN CELL TECHNOLOGY

KHAS UNTUK PELAJAR TAHUN 3 KEATAS SAHAJA

This course introduce techniques and skills required in both plant and animal cell/tissue culture laboratories. Aseptic techniques and sterilization are emphasized in this course. For plant cell and tissue culture practicals, students are exposed to media preparation and several tissue culture techniques including callus induction, organogenesis,shoot and root induction, and acclimatization of tissue cultured plntlets. While in anaimal cell practicals, students are exposed to the techniques of handling mammalian cells, calculating viability of cells and also cell toxicity studies.

This course provides a comprehensive overview on basic immunology, which covers the innate immune responses and acquired immunity. Topics include specific interactions of target cells and T cells, generation and molecular structure of B and T cell antigen receptors,signaling through immune receptors, development of antigen specific T and B cells, and specific roles of cytokines/lymphokines. This course emphasizes T and B cell-mediated immunity and topics of clinical relevance, such as microbial immunity, allergy, autoimmunity, tumor immunology, transplantation immunology, and immunotherapy. In addition, generationand application of monoclonal antibodies will be discussed.

-

This course will be focused on basic principle of vaccine technology such as the scientific methods and vaccine protocol developments. This topic also introduces the regulatory requirement of health care system, vaccine development and large scale production. The other topics will also be discussed includes research and future trends in vaccine discovery and new vaccines.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

3

Year

BSB3653

BSB3693

BSF3233

BSF3243

BSK3123

Code

BIONANOTECHNOLOGY

STEM CELLS TECHNOLOGY

QA & QC SYSTEM

VALIDATION & UNCERTAINTY

SEPARATION TECHNIQUE

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

TUE

TUE

MON

THU

TUE

TUE

THU

TUE

THU

THU

MON

MON

WED

Day

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

15:00-15:50

17:00-17:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

10:00-10:50

Time

V-BK-03

V-BK-03

V-BK-03

W-DK-12

W-DK-12

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DK-14

W-DK-14

W-DK-16

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

0

0

0

30

30

100

100

100

90

90

90

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BSB3133

BSB3133

BSB3133

BSB2172

BSB2172

BSF2212

BSF2212

BSF2212

BSF3233

BSF3233

BSF3233

BSK2193

BSK2193

BSK2193


KHAS UNTUK PELAJAR TAHUN 3 KEATAS SAHAJA

KOD KURSUS INI DIAMBIL BERMULA SESI PENGAMBILAN 2009/2010 DAN 2010/2011 SAHAJA

This course gives an introduction to bionanotechnology where students can learn the different area of nanotechnology can be implmented for biological applications, biomedical applications etc. This c ourse covers funadamental and basic knowledge about nanotechnology, biotechnology and bionanotechnoloy and also the variety of applications concened with nanotechnology.At the end of the couse student gets familiarized with the new field of bionanotechnology, how different area got boost from nanotehcnology and also how one can modify the systemsusing nanostructured materials.

-

This course focuses on the design and management of quality for manufacturing, service and public sectors to achieve global competitiveness. Emphasis is placed on new techniques for managing quality. This course is divided by two parts. Part one provides an introduction to quality principles. Part two focuses on the management system, which is concerned with planning to meet customers¿ needs, arranging to meet those needs throughleadership and strategic planning and accomplishing goals through the action of people and work processes. All of these done with an eye toward continuous improvement and using data and information to guide decision-making process.

The course consists of two closely related parts: uncertainty and validation in scientific analysis and its application to ISO/IEC 17025. Uncertainty covers the type of uncertainty, thecomponents and their sources, combined and standard uncertainty as well as random and systematic errors. Validation discusses and explains method and laboratory validation.

This course introduces the basic principles and instrumentation of separation methods in chemistry. The major separation method used in chemical analysis, including chromatography and electrophoresis will be discussed. Characterization, mechanism involved in separation, instrumental systems, advantages and limitation of methods will also be discussed. Students will be exposed to development and application of knowledge in explaining the concepts and principles of separation. The development of key skills is facilitated by a program of tutorials and practices.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BSK3133

BSK3143

BSK3153

BSK3163

Code

MATERIAL CHEMISTRY

UNIT OPERATION

ORGANIC CHEMISTRY PROCESS

INORGANIC CHEMISTRY PROCESS

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

WED

TUE

THU

THU

THU

THU

FRI

MON

THU

THU

Day

10:00-10:50

11:00-11:50

10:00-10:50

17:00-17:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

10:00-10:50

14:00-14:50

10:00-10:50

11:00-11:50

Time

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-15

W-DK-14

W-DK-14

W-DK-14

V-BK-02

W-DK-15

W-DK-15

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BSK1133

BSK1133

BSK1133

BSK1123

BSK1123

BSK1123

BSK1123

BSK1123

BSK1123


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK3461/MATERIAL CHEMISTRY LAB

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK3451/UNIT OPERATION LAB

This course exposes students to inorganic, organic materials and recent development in nanomaterials. Composite materials consisting of reinforced polymer with conventional fillersand nanomaterials will be discussed. The type of reinforcements, the types of matrices as well as others constituent are discussed in details. Emphasis will be placed on types, characteristics, processing and applications of the various types of materials. The course willexplain the properties of materials i.e. mechanical, electrical, magnetic, thermal and optical properties.

This course discusses material balance on steady and recycle states and material balance based on chemical processes. Emphasis will be placed on energy balance concept based on chemical processes including stoichiometric chemical reaction equations, calculation of heats of reactions and application of the steam table. Also covered in this course are fluid pressure and fluid dynamics, liquid flow measurement, heat transfer and heat exchangers. The development of key skills is facilitated by a program of tutorials and practical.

This course reviews the whole spectrum of today's most commonly used industrial organic chemicals.It explains their origins, uses, preparations.It answers questions of today of chemical industry, such as, What are the industrial chemicals and Where do they come from? How are they made? What are the factors that effect their level of production and pricing ? The course covers the sources, their competitive process and commercial uses of main building blocks starting from 1 carbon - structure to other cycle building blocks as well as other important industrial products such as organic pigments, oils & fats, soap & detergents etc

Modern inorganic chemical processes in the framework of globalisation, sustainability and technical innovation; Major inorganic chemistry industries; Traditional and novel inorganic processes; New chemical science and engineering technology; Sophisticated informationsystems in product and process design and development; Manufacturing and operation; Future of inorganic chemical processes; R&D need for new process chemistry.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

3

Year

BSK3451

BSK3461

BSK3513

BSK3523

BSK3533

Code

UNIT OPERATION LABORATORY

MATERIALS CHEMISTRY LABORATORY

PETROCHEMISTRY

OLEOCHEMISTRY

POLYMER CHEMISTRY

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

TUE

FRI

FRI

FRI

TUE

TUE

TUE

MON

MON

MON

WED

WED

FRI

TUE

WED

WED

WED

WED

FRI

Day

10:00-10:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

11:00-11:50

12:00-12:50

11:00-11:50

16:00-16:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

11:00-11:50

Time

FIST-L-UOL

FIST-L-UOL

FIST-L-UOL

FIST-L-UOL

FIST-L-UOL

FIST-L-UOL

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

FIST-L-PCL

W-DK-15

W-DK-15

W-DK-15

V-BK-01

V-BK-01

V-BK-01

V-BK-03

V-BK-03

V-BK-03

Loc

B

B

B

B

B

B

B

B

B

B

B

B

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

3

3

3

30

30

30

30

30

30

30

30

30

22

22

22

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y


SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSK3143/UNIT OPERATION

SUBJEK INI PERLU DIAMBIL SEKALI DENAGN BSK3133/MATERIAL CHEMISTRY

KURSUS ELEKTIF BAGI PELAJAR TAHUN 3 KE ATAS SAHAJA



Laboratory experiments are designed and structured for the course is related to several unit operations in an open laboratory concept. Laboratory practice are based on pilot-scale apparatus i.e. evaporators, heat exchangers, mixers, filters, gas absorption, distillation, rectification, extraction etc

This course expose students to the handling of various materials and their laboratory preperations and characterizations. The students will acquire the skill and experimental techniques for the sysnthesis, determination of their properties and characterizations of some important materials discussed in the Material Industry course.

-

This course covers various aspects of oils and fats, including oleochemical derivatives. Oleochemical compounds are environmentally friendly chemicals that can be produced from raw material of oils and fats from plant, animal and petroleum by cracking process, or modification. In recent times, with depleting oils from fossil origin, oils and fats of non-fossil origin have started to make great re-entries into various industries including the fuel sector. The advantage of such oils and fats is that their sources are renewable. Research in the field of Oleochemistry has been progress rapidly in Malaysia. This allows our country to continue to emerge as a developed country that is competitive and continues to lead the global oleochemical industry. In this course, recent trends in research and development of Oleochemistry will be discussed.

-



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

4

4

Year

BSB2112

BSB3163

BSB4172

BSK4173

BSK4183

BSK4471

Code

BIOSENSOR AND BIOINSTRUMENTATION

PLANT AND MAMMALIAN CELL TECHNOLOGY

CURRENT TOPICS IN INDUSTRIAL BIOTECHNOLOGY

CURRENT TOPICS IN INDUSTRIAL CHEMISTRY

ENVIRONMENTAL CHEMISTRY

ENVIRONMENTAL CHEMISTRY LABORATORY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

Sec

WED

WED

MON

MON

TUE

FRI

FRI

WED

FRI

FRI

TUE

TUE

WED

THU

THU

THU

MON

MON

MON

Day

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

16:00-16:50

09:00-09:50

10:00-10:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

10:00-10:50

10:00-10:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

W-DK-18

W-DK-18

W-DK-13

W-DK-13

W-DK-13

W-DK-15

W-DK-15

W-DK-14

W-DK-14

W-DK-14

W-DK-14

W-DK-14

W-DK-18

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

FIST-L-OCL

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

Mode

60

60

45

45

45

60

60

60

60

60

60

60

60

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Exam

BSB1162BSB3133BSB1162BSB3133

BSB1143BSB2172BSB1143BSB2172BSB1143BSB2172

BSK1113

BSK1113

BSK1113


KHAS UNTUK PELAJAR TAHUN 4 SAHAJA DAN DIAMBIL SEKALI DENGAN BSB2471/BIOSENSOR LABORATORY

SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB3441/PALNT AND MAMMALIAN CELL TECHNOLOGY LAB

SUBJEK INI PERLU DIABIL SEKALI DENGAN BSK4471/ENVIRONMENTAL CHEMISTRY LAB

SUBJEK INI PERLU DIABIL SEKALI DENGAN BSK4183/ENVIRONMENTAL CHEMISTRY

-

Topics will be discussed in this course includes concepts, techniques and applications of plant and mamalian cell culture; principle of totipotency; essential equipment of a tissue and cell culture facility; growth media preparation; methods for growingand store suspension nadadhesion cultures; different cell type such as embriogenic culture, callus, independent cell, and stem cell; as well as benefits from clone reproduction in agriculture, live stock, medicine and other related fields. Priciple and benefit of cryo preservation and germplasm collection also will be discussed further.

-

The course discusses current topics in industrial chemistry and chemical technology with emphasis on local and regional industries.

This course introduces the concepts of environmental science, environmental analysis, and environmental issues. It covers some fundamental aspects of the science of atmosphere, waters, and soil. This course covers environment quality guidelines used in Malaysia. It also covers the environmental monitoring strategies and analysis of inorganic and organic analyte in environment.

In this course students will learn basic techniques for sampling and carry out chemical analysis of environmentalsamples. Students will also learn to utilize electronic data acquisition systems and further develop their scientific writing skills.



13-AUG-12 03:16 PM

FSTI

Faculty

GAMBANG

NO TIMETABLE

Campus

DEGREE

DEGREE

Level

2

2

2

2

Year

BSK3573

BSK3583

BSB2411

BSF2212

BSK2103

BSK2173

Code

FLAVOR AND FRAGRANCE CHEMISTRY

ELECTROCHEMISTRY

INDUSTRIAL MICROBIOLOGY LABORATORY

INDUSTRIAL MANAGEMENT

INORGANIC CHEMISTRY II

ORGANIC CHEMISTRY II

Course Name

01

01

01

01

01

01

01

02

01

02

01

01

Sec

WED

WED

FRI

THU

THU

THU

Day

11:00-11:50

12:00-12:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

Time

W-DK-14

W-DK-14

W-DK-14

V-BK-03

V-BK-03

V-BK-03

Loc

L

L

L

L

L

L

Mode

22

22

22

22

22

22

0

0

0

0

5

1

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

N

N

Y

Y

Y

Y

Exam

BSK1143

BSK1123




SUBJEK INI PERLU DIAMBIL SEKALI DENGAN BSB2123/INDUSTRIAL MICROBIOLOGY

-

-

This course covers practical in the application of microbes in industries. Emphasis will be given on techniques for screening of potential industrial microbes, identification of microorganisms, water and food analyses, fermentation processes and antibiotic tests.

The purpose of this course is to introduce to you the comparable GLP and ISO 17025 Principles and Requirements for high-stakes testing and calibration laboratories. We will address the quality infrastructure supporting testing and research laboratory management so you become familiar with many aspects of laboratory quality management and how to achieve recognition and certification. Upon successful completion of this course, students will have a firm grasp of the technical and philosophical aspects of laboratory quality management and will have the skills to initiate laboratory quality management for high-stakes testing and research programs.

This course provides a sritical study of modern inorganic chemistry. Atomistics and the fundamentals of inorganic chemistry shall be the foundation for a critical and systematic study. Part I presents a balanced and critical account of a systematic study of transition metals and some of their compounds. Emphasis shall be on the stability, structure and properties based on d-block chemistry. There follows, in Part II a balanced and critical account of a systematic study of actinoids and their compounds; and lanthanoids and their compounds. Emphasis shall be on the stability, structure and properties based on f-block chemistry. Part III takes a look at the chemistry of the d-block and f-block solid state providing a glimpse at the practical uses of important classes of these oinorganic compounds and their industrial applications.

The course is a continuation of organic chemistry I on the chemistry of carbon compounds. Upon successful completion of Organic Chemistry II, students should understand principles of organic compounds including, to understanding nomenclature, structure, reactions, reaction mechanisms, reactivity and biological relevance, properties and synthesis of organic molecules



Faculty : FACULTY OF MANUFACTURING ENGINEERING

13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

1

1

1

1

1

Year

BFF1102

BFF1113

BFF1123

BFF1303

BFF1502

Code

STATICS

ENGINEERING MATERIALS

DYNAMICS

ELECTRICAL/ELECTRONICS ENGINEERING

PROJECT MANAGEMENT

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

02

02

Sec

TUE

TUE

FRI

FRI

TUE

FRI

FRI

WED

WED

FRI

FRI

MON

MON

WED

WED

MON

MON

WED

WED

Day

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

15:00-15:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

Time

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

75

75

75

60

60

60

60

60

60

60

60

60

60

70

70

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BFF1102

BFF1102

BFF1102

BFF1102


This course introduces introduction to mechanics, force vector, equilibrium of particle and rigid body, structural analysis, friction, centroids, center of gravity and moment of inertia.

This course introduces atomic bonding, crystal structure, mechanical and physical properties, microstructure, phase diagram, ferrous and non-ferrous alloys, polymers, ceramics and advanced materials.

This course introduces principles of kinematics of a particle and a rigid body, kinetics of a particle and a rigid body utilizing force and acceleration method, work and energy method and impulse and momentum method.

This course introduces DC resistive network analysis, AC network analysis, diodes, bipolar junction transistors (BJT), operational amplifier (op-amp) and digital logic circuits.

This course embraces a broad basic overview and principles of project management which has become central to operations in manufacturing enterprises throughout the three primary processes of managing projects; initialization, planning and scheduling, and organizing.



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

1

1

1

1

Year

BFF1602

BFF1612

BFF1801

BFF1811

Code

TECHNICAL DRAWING

CAD MODELING

MACHINING 1

MACHINING 2

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

02

02

02

Sec

MON

MON

MON

WED

WED

WED

TUE

TUE

TUE

MON

MON

MON

TUE

TUE

TUE

MON

MON

MON

WED

WED

WED

TUE

TUE

TUE

THU

THU

THU

Day

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-A-M-05

FKP-A-M-05

FKP-A-M-05

FKP-A-M-05

FKP-A-M-05

FKP-A-M-05

FKP-A-M-04

FKP-A-M-04

FKP-A-M-04

FKP-A-M-04

FKP-A-M-04

FKP-A-M-04

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BFF1602

BFF1602

BFF1602

BFF1602

BFF1602

BFF1602


This course introduces basic technical drawing method, symbols and standards. Manual drafting and CAD software are used to produce drawing on assignments throughout the course.

This course introduces students to CAD/CAM and geometric modeling which emphasizes oncurves, surfaces and NURBS. Students also experience the practical learning through the CATIA V5 software.

This course introduces the basic technique to perform manual production techniques by selecting and using appropriate hand tools and perform basic turning processes and operations according to the given dimensions, specifications and tolerances.

This course introduces student basic application of the measuring instruments, milling process and surface grinding.



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

1

1

2

2

2

2

Year

BFF1921

BFF1922

BFF1133

BFF2003

BFF2223

BFF2233

Code

ENGINEERS IN SOCIETY

ENGINEERING ECONOMY

MECHANICS OF MATERIALS


FLUID MECHANICS

THERMODYNAMICS

Course Name

01

01

01

01

1

1

1

1

01

01

01

01

02

02

02

02

01

01

01

01

01

01

01

01

Sec

THU

THU

WED

WED

MON

MON

WED

WED

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

FRI

FRI

Day

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

FKP-F-DK-04

FKP-F-DK-04

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

Loc

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

30

30

30

30

30

30

30

30

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BFF1102BFF1113BFF1102BFF1113BFF1102BFF1113BFF1102BFF1113


-

-

This course introduces the concept of stress and strain under axial, torsion, bending, transverse shear and combined loadings in elastic structural members. Plane stress transformation is also included.

This course introduces input and output, variables, constants, arithmetic operations and mathematical functions, user-defined functions, selection making decision and repetitive construct and array data structure. The programming language used for the course is C language.

-

-



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

2

2

2

2

Year

BFF2403

BFF2413

BFF2513

BFF2613

Code

MANUFACTURING PROCESSES 1

MANUFACTURING PROCESSES 2

MANUFACTURING SYSTEM

MANUFACTURING DESIGN

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

THU

TUE

TUE

THU

THU

WED

WED

FRI

FRI

MON

MON

WED

WED

Day

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

Time

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-02

FKP-F-BK-02

FKP-F-BK-01

FKP-F-BK-01

FKP-B-M-05

FKP-B-M-05

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

Mode

60

60

60

60

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

Exam

BFF2403

BFF2403

BFF2403

BFF2403


This course introduces the various type of manufacturing processes including metal casting processes, forming and shaping processes for metal, plastics and composites, material removal processes, joining processes and finishing processes.

This course introduces the processing of ceramics and composite materials. It also covers powder metallurgy, non traditional machining and rapid prototyping processes

The course provides in-depth understanding of the structure and function of modern manufacturing systems. Methods of managing resources through implementation of strategic lean practices in a manufacturing environment to achieve the strategic goals of waste minimization, quality improvement, increased manufacturing flexibility, downtime reduction, continuous process improvement and greater resources efficiency would be emphasized.

-



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

2

2

2

2

Year

BFF2623

BFF2801

BFF2821

BFM2013

Code

CAD/CAM/CAE

ELECTRICAL/ELECTRONICS LAB

MECHANICS LAB

PROGRAMMING FOR ENGINEERS

Course Name

01

01

01

01

02

02

02

02

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

01

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

MON

TUE

TUE

TUE

TUE

TUE

TUE

THU

THU

THU

THU

THU

FRI

FRI

Day

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

Time

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-G-MK-01

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-A-MK-01

FKP-A-MK-01

FKP-A-MK-01

FKP-A-MK-01

FKP-A-MK-01

FKP-A-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

FKP-B-MK-01

Loc

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

B

L

L

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

Exam

BFF1612

BFF1612

BFF1612

BFF1612

BFF1612

BFF1612

BFF1612

BFF1612

BFF1303

BFF1303

BFF1303

BFF1303

BFF1303

BFF1303

BFF1133

BFF1133

BFF1133

BFF1133

BFF1133

BFF1133

BFF2003

BFF2003

BFF2003

BFF2003


.This course introduces the basic concept CAD/CAM system. The understanding of the of CAD/CAM concept and focus on different procedures in NC programming, the different geometry and the selection of the appropriate cycle and the proper tooling. Understanding the features and application of the various method of creating geometrical surfaces, free form surface and derived surface also ability to handle digitized data to constructed model. Use the available features to machine the different types of surfaces using 3-Axis and the application of tool containment boundaries during machining

-

This lab introduces engineering materials principles, principles of solid mechanics through practical experiments. It covers area of static, dynamic and frinctional mechanics. It also covers experiments on stress and strain for different materials.

This course is an intermediate C programming designed specifically for mechatronics system. It covers pointers, enumerated, structure and union data types, link-list, queue and stack data types, dynamic library link programming, object-oriented programming and programming under Windows GUI. A project-based mechatronics system is required.



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

2

2

3

3

3

3

Year

BFM2303

BFM2313

BFF3103

BFF3123

BFF3203

BFF3302

Code

ANALOG ELECTRONICS

DIGITAL ELECTRONICS

VIBRATIONS

MACHINE DESIGN

HEAT TRANSFER

SENSOR AND INSTRUMENTATION SYSTEMS

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

Sec

MON

MON

WED

WED

TUE

TUE

THU

THU

FRI

FRI

FRI

MON

MON

THU

THU

TUE

TUE

THU

THU

WED

THU

THU

WED

THU

THU

Day

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

09:00-09:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

12:00-12:50

14:00-14:50

15:00-15:50

Time

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-B-M-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-BK-06

FKP-B-M-03

FKP-B-M-03

FKP-F-BK-06

FKP-B-M-03

FKP-B-M-03

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

L

B

B

Mode

30

30

30

30

30

30

30

30

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

Y

Y

Y

Y

N

N

N

N

N

N


This course introduces Junction Field-Effect Transistor (JFET), Metal Oxide Semiconductor Field-Effect Transistor (MOSFET), thyristor circuit and devices, waveform generator, wave shaping circuit, multivibrator, oscillator, timer and filter circuits.

This course covers flip-flops, counters and registers, Integrated Circuit (IC) logic families, DAC/ADC and memory devices.

-

-

-

This course covers PC-based data acquisition system to measure speed, position, temperature, strain, force and pressure. Extensive laboratory and group project.



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

3

3

Year

BFF3403

BFF3503

BFF3523

BFF3543

BFF3801

Code

ADVANCED MACHINING

PRODUCTION ENGINEERING

PRODUCTION PLANNING AND CONTROL

RELIABILITY ENGINEERING

THERMAL-FLUID ENGINEERING LAB

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

02

02

02

Sec

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

WED

WED

MON

MON

MON

THU

THU

THU

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

Time

FKP-B-M-07

FKP-B-M-07

FKP-B-M-07

FKP-B-M-07

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-DK-03

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-05

FKP-F-BK-05

FKP-A-BK-05

FKP-A-BK-05

FKP-A-BK-05

FKP-A-BK-05

FKP-B-M-10

FKP-B-M-10

FKP-B-M-10

FKP-B-M-10

FKP-B-M-10

FKP-B-M-10

Loc

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Exam

BFF2213

BFF2213

BFF2213

BFF2213

BFF2213

BFF2213


This course will introduce the knowledge and technologies in precision machining, techniqueof making tool and die and engineering measurement using industrial standard equipments

This course introduces the role of production engineering in a manufacturing plant. The concept of production engineering for lean production, planning of a manufacturing plant from layout planning, process planning, equipment and facilities planning up to designing a manufacturing plant and process will be introduce together with practical project. Student toowill expose to the basic knowledge of time standard, takt time, ergonomic elements planningin performing production engineering tasks and producibility engineering.

-

This course introduce the concept of basic quality tools, fundamental of statistics, control chart for variables, control chart for attributes, acceptance sampling systems and reliability.

-



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

Campus

DEGREE

Level

3

3

3

3

4

4

Year

BFM3003

BFM3303

BFM3403

BFM3503

BFF4103

BFF4503

Code

ARTIFICIAL INTELLIGENCE SYSTEM

ELECTRICAL DRIVE SYSTEM

FLUID DRIVE SYSTEM

PLC AND MICROCONTROLLER SYSTEMS

CONTROL SYSTEM ENGINEERING

FACTORY MANAGEMENT

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

TUE

TUE

THU

THU

TUE

TUE

WED

WED

MON

MON

FRI

FRI

TUE

TUE

THU

THU

TUE

FRI

FRI

MON

MON

WED

WED

Day

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

09:00-09:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

16:00-16:50

17:00-17:50

Time

FKP-F-BK-02

FKP-F-BK-02

FKP-G-MK-01

FKP-G-MK-01

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-F-BK-06

FKP-B-M-04

FKP-B-M-04

FKP-B-M-04

FKP-B-M-04

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-01

FKP-F-DK-04

FKP-F-DK-04

FKP-F-DK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

Loc

L

L

L

L

B

B

L

L

B

B

L

L

L

L

B

B

L

L

L

L

L

L

L

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

Y

Y

Y

Y

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y


-

This course introduces basic power system, DC motor analysis and design DC motor drive, and single and three phase motor drives analysis and design.

This course introduces hydraulic system, hydraulic actuators, valves and accessories, pneumatics system, pneumatic actuators, valves and accessories, electro fluid power system and programmable logic controller.

-

This course introduces linear, time-invariant (LTI) control system modeling, analysis and design. The covered topics are modeling and representing the frequency response of dynamic systems; transient, stability and steady-state analysis; control system analysis and design using root-locus and sinusoidal frequency techniques.

-



13-AUG-12 03:13 PM

FKP

Faculty

PEKAN

NO TIMETABLE

Campus

DEGREE

DEGREE

Level

4

4

4

4

4

4

3

Year

BFF4543

BFF4603

BFF4613

BFF4911

BFM4503

BFM4703

BFF3906

Code

LEAN PRODUCTION SYSTEM 2

MOLD 1

DIE 1

ENVIRONMENT SAFETY & HEALTH

ROBOTICS FOR ENGINEERS

COMPUTER-CONTROLLED OF MANUFACTURING SYSTEM

INDUSTRIAL TRAINING

Course Name

01

01

01

01

01

01

01

01

1

1

1

1

01

01

02

02

02

02

01

01

01

01

01

Sec

TUE

TUE

THU

THU

TUE

TUE

THU

THU

TUE

TUE

THU

THU

MON

MON

MON

MON

WED

WED

TUE

TUE

FRI

FRI

Day

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

Time

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-01

FKP-F-BK-03

FKP-F-BK-03

FKP-F-BK-03

FKP-F-BK-03

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-F-BK-04

FKP-F-DK-03

FKP-F-DK-03

FKP-A-BK-04

FKP-A-BK-04

FKP-A-BK-04

FKP-A-BK-04

FKP-F-BK-03

FKP-F-BK-03

FKP-F-BK-03

FKP-F-BK-03

Loc

L

L

L

L

L

L

B

B

L

L

B

B

L

L

L

L

L

L

L

L

L

L

Mode

30

30

30

30

15

15

15

15

15

15

15

15

80

80

30

30

30

30

30

30

30

30

130

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BFF4513

BFF4513

BFF4513

BFF4513

BFF3603

BFF3603

BFF3603

BFF3603

BFF3613

BFF3613

BFF3613

BFF3613


-

-

This course introduce on tribology in die industries and hot press forming. Construction of die design starting from CAD untill fabrication and testing of final stamping parts was also performed.

-

-

-

The industrial training has to be completed in an industrial firm. The students work in currentprojects of the firm in the development, production or distribution process. The projects deal with manufacturing or related fields and allow the practical application of university knowledge. The training delivers insight into the future professional life.



13-AUG-12 03:13 PM

FKP

Faculty

NO TIMETABLE

Campus

DEGREE

Level

4

4

Year

BFF4902

BFM4902

Code



Course Name

F01LB

01


70

70

Cap

TBA

TBA

Staff

N

N


This course focuses on the real professional approach to engineering studies. Students will practice their engineering knowledge and technical skill from the previous training to solve an engineering. The application of project management element as a medium for conductingand integration all expertise areas during the course run is highly encouraged.

-


Faculty : FACULTY OF TECHNOLOGY

13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

Year

BPF1113

BPF1123

BPF1213

Code

PRINCIPLES OF MANAGEMENT

INDUSTRIAL PSYCHOLOGY

PRINCIPLES OF ECONOMICS

Course Name

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

02

02

02

Sec

MON

MON

MON

WED

WED

WED

MON

MON

TUE

TUE

TUE

THU

MON

MON

TUE

THU

THU

FRI

Day

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

14:00-14:50

10:00-10:50

11:00-11:50

14:00-14:50

11:00-11:50

12:00-12:50

12:00-12:50

09:00-09:50

10:00-10:50

08:00-08:50

Time

T-DK-01

T-DK-01

T-DK-01

T-DK-01

T-DK-01

T-DK-01

T-DK-02

T-DK-02

T-DK-02

T-DK-02

T-DK-02

T-DK-02

T-DK-01

T-DK-01

T-DK-01

T-DK-01

T-DK-01

T-DK-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

70

70

70

70

70

70

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The principles of management course generally discusses on the fundamentals management, i.e., Planning, Organizing, Leading and Controlling or POLC. Students will also be exposed to the issues and global challenges of future managers so that they will understand on the trends and best practices in managing an organization.

The subject is intended to provide an understanding of human work behavior in any industrial setting. It will focuses on three parts concerning personnel issues, worker issues, organizational issues and work environment issues investigated in industrial/organizstional psychology. Specific topic include Introduction: Definitions & History;Research Methods; Job Analysis: Employee selection, Performance and Training & Development; Positive and Negative Employee Attitudes and Behavior; Leadership & Motivation; Work Teams and Organizational Development

This course is designed to introduce students to key concepts used in microeconomics and macroeconomics, and to facilitate a basic understanding of economic phenomena. The goals will help students to understand fundamental concepts and tools so that students can use them to analyse various economic issues at the national and international levels. This course is primarily concerned with Malaysian economy and will help them understand how economy works.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

Year

BPF1223

BPP1113

BPS1113

Code

INTRODUCTION TO COST ACCOUNTING

PROJECT MANAGEMENT

OCCUPATIONAL SAFETY & HEALTH FUNDAMENTALS

Course Name

01

01

01

01

02

02

02

02

01

01

01

01

01

01

02

02

02

Sec

THU

THU

FRI

FRI

WED

WED

THU

THU

TUE

TUE

THU

MON

MON

TUE

WED

WED

THU

Day

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

17:00-17:50

15:00-15:50

11:00-11:50

12:00-12:50

11:00-11:50

Time

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-03

T-DK-03

T-DK-03

T-DK-01

T-DK-01

T-DK-05

T-DK-01

T-DK-01

T-DK-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


-

This course provides foundation and conceptual framework of project management. The discussion will begin with the introdution of project management body of knowledge and its recognized institutions in the world in promoting the area of project management. In this relation, Project Management Institute (PMI) will be introduced to the students as a recognized and professional institution for project management. issues pertaining tp PMI credentials, core values, code of ethics and professional conduct and knowledge areas among the topics to be discussed. Furthermore, students will have an opportunity to discussproject management concept involving organizational influence and team's involvement in ensuring successful project implementation, scope management, project charter and project management processes. The last chapter aims to familiarized students with the tools and latest technology in managing project.

This course introduces the principles and basic concepts of occupational safety and health. Students will be exposed to the history of occupational safety and health (OSH) development, act and legislations in relation to OSH, the responsibilities and qualification of safety and health practitioner and professional ethics. The human bodies and it's relaationship to workplace productivity will also be discussed. Introduction to industrial hygiene is also discussed as a foundation for the next subjects. Some common safety and health hazards will be emphasized for better understanding.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

1

1

1

1

Year

BPS1413

BPS1423

BPS1433

BPS1443

Code

FIRE PREVENTION AND PROTECTION SYSTEM

INDUSTRIAL HYGIENE

HAZARD RECOGNITION & RISK MANAGEMENT

INDUSTRIAL TOXICOLOGY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

WED

WED

WED

THU

THU

THU

FRI

THU

THU

FRI

Day

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

10:00-10:50

08:00-08:50

09:00-09:50

09:00-09:50

16:00-16:50

17:00-17:50

10:00-10:50

Time

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-04

T-DK-04

T-DK-04

T-DK-04

T-DK-04

T-DK-04

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPS1113

BPS1113

BPS1113

BPS1113

BPS1113

BPS1113

BPS1113

BPS1113

BPS1113


This subject is aimed to give an understanding on the basic concept of Fire Prevention and ProtectionSystem including its application in buildings. Organization pesonnel from top management to the lowest rank of workers are the focused group that carries continuous fireprevention measures while at work or living within the premisess. Besides, the usage of fire protection equipment are important to all workers particularly actions during emergencies. The course will cover topics such as: Introduction to Basic principles iof Fire , The components ofFire Safety, The (Protection) Active and (Prevention) Passive Fire safety System , The Life Cyclers of A Building, Loss Impact and Means of Escape During Emergenciesa. Upon completion of this course , the student will have studied the major topic areas within the field of fire hazard management and other sources of hazard, fire safety best practices and fire management system as well as emergency preparedness.

This course generally will give an introduction to the field of industrial hygiene, including the chemical, physical and biological agents which affect the health and safety of employees, the application of control measures for the various agents and study of occupational exposure limit. Upon completion of this course, the student will have studied the major topic areas within the field of chemical, physical and biological hazards, principle of exposure monitoring, medical surveillance and personal protective equipment.

The most important aspect of OSH study is the ability in recognizing and understanding the existence of hazardous substance or materials within the work place or living areas. The level of risk is depends on how the hazards are being managed and controlled. This course is aimed to give an understanding on the basic steps in recognizing hazards at work place and managing the risks to an acceptable standard. These include the studies oh hazard identification, types of risks, risk characterization, international standards, total quality management and impact assessment.

This course provides students with a basic understanding and appreciation of the principles of the toxic effects of chemicals on the living organism, regulatory aspect, application of toxicology in industry and the effects of toxic substances on man and the environment. Topics include: disposition and metabolism of toxic substances, types of exposure and response, toxic responses of selected body systems, toxic mechanisms of drugs, industrial chemicals, food additives, pesticides, environmental pollutants, household products, toxicity testing and risk assessment



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

1

2

2

2

Year

BPT1113

BPF2113

BPF2123

BPF2213

Code

OPERATION & PRODUCTION IN INDUSTRIAL MANAGEMENT

RESEARCH METHODOLOGY

QUALITY MANAGEMENT SYSTEM

INTRODUCTION TO FINANCE

Course Name

01

01

01

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

02

02

02

Sec

TUE

TUE

THU

MON

MON

WED

THU

THU

FRI

WED

WED

THU

THU

THU

FRI

MON

MON

TUE

MON

MON

TUE

Day

08:00-08:50

09:00-09:50

08:00-08:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

08:00-08:50

09:00-09:50

08:00-08:50

16:00-16:50

17:00-17:50

09:00-09:50

10:00-10:50

11:00-11:50

14:00-14:50

16:00-16:50

17:00-17:50

10:00-10:50

Time

T-DK-02

T-DK-02

T-DK-01

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-03

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

T-DK-05

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The subject is intended to provide an understanding on the operational aspects of management techniques. It will focus on the nature of operations management and its impact on competitiveness, and the role of the operations manager and the relationship with other business functions.

The research methodology course introduces students to the principles of social science research and its application when conducting research projects. Particular attention will be placed on quantitative research methodology. However, a briefly introduction of qualitative research will also be introduced. Topics that will be covered include how to identify researchproblem, research questions, research objectives and the significance of the research. The importance of literature review will be discussed and the role of theoretical framework in a research will be higlighted. The role of theories in research, hypotheses development and detail description about research design will be discussed. Finally, how to prepare a research proposal and research report will be part of students activities in this course.

This course intends to provide and understanding of fundamentals of Quality Management. The topics covered include Introduction to Quality Management, Cost of Poor Quality, Employee Involvement, Customer Satisfaction, Continuous Process Improvement, Supplier Partnership, Benchmarking, Environmental Management System, Quality Function Deployment and Quality Tools. Students will be exposed to various case studies on quality concept either locally or internationally.

-



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

Year

BPF2413

BPP2113

Code

MANAGEMENT INFORMATION SYSTEM

PROJECT PLANNING & CONTROL

Course Name

01

01

01A

01A

01B

01B

02

02

02A

02A

02B

02B

01

01

01A

01A

01B

01B

Sec

MON

MON

TUE

TUE

TUE

TUE

WED

WED

TUE

TUE

THU

THU

FRI

FRI

MON

MON

WED

WED

THU

THU

Day

08:00-08:50

09:00-09:50

11:00-11:50

11:00-11:50

12:00-12:50

12:00-12:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

T-DK-02

T-DK-02

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

T-DK-02

T-DK-02

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

T-DK-04

T-DK-04

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

Loc

L

L

B

T

B

T

B

B

L

L

B

B

B

B

L

L

B

B

B

B

Mode

61

61

31

31

31

31

30

30

60

60

30

30

30

30

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPP1113

BPP1113

BPP1113

BPP1113

BPP1113

BPP1113


This course aims to provide firm understanding on the significance role of information systems in today's organization in particular in managing organizational most valuable assets - its data and information. The discussion sessions shall covers four major topics; Information Systems and its applicability in modern enterprise and organization including its strategic competitive advantage as well as ethical issues involved; Information technology infrastructure and security issues; Information system applicability for digital age; building and managing information systems for organizational use. Hands on activity on the usage of office automation system and designing relational database shall be covered in lab sessions.

The aim of this course is to expose students to frameworks and processes that are useful in project planning and control. At the end of this course students will be able to apply SMART principles to a project. They will be aware of the wider issues of planning and control in relation to project management.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

Year

BPP2123

BPP2223

BPP2613

Code

PROJECT PORTFOLIO MANAGEMENT

PROJECT COST & BUDGET MANAGEMENT

ENVIRONMENTAL MANAGEMENT AND SUSTAINABILITY

Course Name

01

01

01

01

01

01

01

01

01

02

02

02

Sec

TUE

FRI

FRI

MON

TUE

TUE

TUE

TUE

FRI

TUE

TUE

FRI

Day

17:00-17:50

15:00-15:50

16:00-16:50

12:00-12:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

T-DK-01

T-DK-03

T-DK-03

T-DK-04

T-DK-04

T-DK-04

T-DK-04

T-DK-04

T-DK-04

T-DK-01

T-DK-01

T-DK-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

20

20

20

20

20

20

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPP1113

BPP1113

BPP1113

BPP1113

BPP1113

BPP1113


This course aims to provide a bird-eye's view in managing all projects within the organization. Students will have opportunity to obtain firm understanding on project portfolio management (PPM). Improving resource utilization and planning and making right decision at the right time about adding new projects or continues with the current one are the key topics. Establishing proper methods in evaluating, selecting and prioritizing organizational resources to the projects shall be discuss extensively. Appropriate tools and techniques shall be practice in class to assists student in evaluating project that is aligned with corporate strategies and return on investment goals. At the end, students are able to develop necessary skills in monitoring resource utilization, cost and projects across the portfolio.

This subject is intended to introduce students the first step in successfully managing a project's costs is to have a project budget that realistically reflects the costs for executing theproject. Project Cost & Budget Management addresses the identification, elaboration, planning, development and management of the project budget. Using best practices students learn how to develop a project cost estimate, project budget and the project budgetbaseline. In addition, students practice the preparation of a spending profile that supports variance analysis and corrective action using earned value management (EVM). Students gain an effective skill set for developing and controlling the project budget baseline

This course will cover principles and concepts about ecology and ecosystems, weather and human impacts on the environment and its management and pollution. Natural renewable and non-renewable resources and its management, current issues on the environment, including economics, global view and ethics comprise the materials of the course. The topicsthat will be discussed include issues related to trade, environment and development and roles that are played by the consumer, community, industry and government towards sustainable development. The students will be also introduced to the ISO 14000 series of Environmental Management Standards



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

Year

BPS2113

BPS2123

BPS2413

BPS2423

Code

OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT SYSTEM

BEHAVIOUR BASED SAFETY

TOXIC AND HAZARDOUS WASTE MANAGEMENT

INDUSTRIAL SAFETY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

Sec

THU

THU

FRI

TUE

TUE

THU

MON

MON

TUE

MON

THU

THU

Day

11:00-11:50

12:00-12:50

08:00-08:50

08:00-08:50

09:00-09:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

12:00-12:50

09:00-09:50

10:00-10:50

Time

T-DK-06

T-DK-06

T-DK-06

T-DK-06

T-DK-06

T-DK-06

T-DK-04

T-DK-04

T-DK-04

T-DK-06

T-DK-06

T-DK-06

Loc

L

L

L

L

L

L

L

L

L

L

L

L

Mode

70

70

70

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPS1113

BPS1113

BPS1113

BPF1123

BPF1123

BPF1123

BPS1443

BPS1443

BPS1443

BPS1113

BPS1113

BPS1113


This course will expose the candidates to the latest and existing occupational safety and health management system, the evolution and the elements in the systems that cater current requirement in occupational safety and health. The course also introduces the concepts, relationships and principles of managing the occupational safety and health function and the development of training procedures and practices to integrate that function into the organization.

the course will introduce usage of behavior based safety as a tool for widespread involvement and change. the course will review the relationship between attitudes, culture, systems and behavior, explain how behaviour based safety fits into the hierarchy of countrol and introduce four elements of the behaviour based safety process. underlying concepts related to performane management and a powerfool tool (ABC analysis) is learned and applied to understanding behavioural and to develop a change plan. overall, the course provides a clear understanding of how attitudes, cultures and system influence or affect behaviour and focuses on understanding how successful behavioral change efforts really work. effective leadership and managemnt are seen as the cornerstone to success in promoting safety culture. this course also will introduce current thinking on safety leadership,supervision models, and strategies relevant to health and safety at work

This course introduces the student to the physical, chemical and toxic properties of toxic andhazardous wastes which are the basis for their hazard classification, movement and distribution as well as their impacts on human health and the environment. The industries which generate toxic and hazardous waste will be discussed. The management of these wastes which include handling, storage and transportation based on the regulations stipulated in the Environmental Quality Act, 1974 as well as other international regulations will be discussed. Understanding on the treatment and disposal processes will be emphasized including pollution prevention and waste minimization strategies.

This course is designed to give student understanding in industrial safety field and its application in the hazards identification and risk management. Students will be exposed to machinery safety practices including design, safe operation, fencing and guarding. Student also will be introduced to mechanical handling safety which details out the design and safe operation of material handling equipment. Hazards and control of confined space and pressure vessel are also exposed to student. Basic electrical safety topics are discussed as part of industrial safety menagement.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

2

2

2

Year

BPS2433

BPS2613

BPT2113

BPT2123

BPT2413

Code

ERGONOMICS


LEGAL AND ETHICAL ISSUES

SUPPLY CHAIN MANAGEMENT

PRINCIPLES OF CAD/CAM

Course Name

01

01

01

02

02

02

03

03

03

01

01

01

01

01

01

01

01

01A

01A

01B

01B

Sec

MON

MON

TUE

TUE

TUE

FRI

TUE

TUE

FRI

MON

MON

MON

MON

TUE

TUE

MON

MON

TUE

TUE

WED

WED

Day

10:00-10:50

11:00-11:50

14:00-14:50

08:00-08:50

09:00-09:50

10:00-10:50

15:00-15:50

16:00-16:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

12:00-12:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

Time

T-DK-03

T-DK-03

T-DK-03

T-DK-01

T-DK-01

T-DK-01

T-DK-04

T-DK-04

T-DK-04

T-DK-02

T-DK-02

T-DK-02

T-DK-03

T-DK-03

T-DK-03

T-DK-04

T-DK-04

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

Mode

60

60

60

20

20

20

20

20

20

60

60

60

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

Exam

BPS1113

BPS1113

BPS1113


This course provides a foundation for understanding the key concepts and principles related to ergonomics. The aim of ergonomics in industry is to increase productivity according to thehuman machine and environment interaction. And it also assist to decrease accidents and illnesses by obtaining a good fit and techniques of handling between the employer and the job. Examines relationships between employer, work equipment and work environment. case studies are also used to test students' current knowledge and understanding of the waycomplex systems are designed and used. Managerial and administrative approach will also covered in terms of best practice at workplace as part of ergonomics solutionsin work organization.

-

This course is intended to introduce the legal and ethical issues pertaining to business and organization. Students examine such issues as personnel law and obligations; negotiations; contract management; constitutional rights of individuals; legal liability of professionals and organizations; legal compliance; and ethical standards.

-

-



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

2

2

3

3

Year

BPT2423

BPT2613

BPF3113

BPP3113

Code

STATISTICAL PROCESS CONTROL


MANAGING HUMAN CAPITAL

CHANGE MANAGEMENT

Course Name

01

01

01A

01A

01B

01B

01

01

01

02

02

02

01

01

01

02

02

02

01

01

01

Sec

WED

WED

THU

THU

FRI

FRI

TUE

TUE

FRI

TUE

TUE

FRI

MON

MON

TUE

MON

MON

TUE

TUE

TUE

THU

Day

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

08:00-08:50

09:00-09:50

10:00-10:50

15:00-15:50

16:00-16:50

11:00-11:50

08:00-08:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

17:00-17:50

16:00-16:50

17:00-17:50

08:00-08:50

Time

T-DK-02

T-DK-02

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

T-DK-01

T-DK-01

T-DK-01

T-DK-04

T-DK-04

T-DK-04

T-DK-03

T-DK-03

T-DK-03

T-DK-02

T-DK-02

T-DK-03

T-DK-06

T-DK-06

T-DK-05

Loc

L

L

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

Mode

60

60

30

30

30

30

20

20

20

20

20

20

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y


The subject is designed to introduce methods for data collection, control chart construction and interpretation, and statistical diagnosis for process improvement. The course blends statistical process control (SPC) and principles of statistics for quality control and process improvement purpose. It also covers forecasting techniques and acceptance sampling methods.

-

This course provides an overview of many issues related to managing human capital in the organization. Topics are designed to gain an understanding of how individuals in organization grow and progress, and what are the formal dimensions that impinge upon employees and employers, and their relationship to planning, mobility, goal-achievement, motivation and performance.

The student will identify ways to solve problems related to change on the job, including organising change in organisation. Strategies and need to help the organisation successfully implement change will be discussed. Students are introduced with models in helping the organisation to manage change and how to manage resistance to change. Several approaches will be introduced in ensure how change in management will be effective.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

Year

BPP3133

BPP3143

BPP3213

Code

CONTRACT AND PROCUREMENT MANAGEMENT

PROJECT RISK MANAGEMENT

ESTIMATING & SCHEDULING

Course Name

01

01

01

01

01

01

01

01

01

Sec

WED

WED

THU

THU

FRI

FRI

THU

THU

FRI

Day

10:00-10:50

11:00-11:50

10:00-10:50

09:00-09:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

17:00-17:50

Time

T-DK-04

T-DK-04

T-DK-04

T-DK-05

T-DK-05

T-DK-05

T-DK-04

T-DK-04

T-DK-04

Loc

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPP3213BPP2113BPP2223BPP3213BPP2113BPP2223BPP3213BPP2113BPP2223

BPP3213BPP2113BPP2223BPP3213BPP2113BPP2223BPP3213BPP2113BPP2223

BPP2223

BPP2223

BPP2223


This course develops an understanding on the concepts and practices in contract and procurement management. The discussion involved strategies applied during procurement processes and contract negotiation as one of the project management activities. Procurement solution options, procurement decision model, problem solving approach by considering project activities, risk allocation and responsibility will be discuss during the class sessions. At the end of teh course, students will be equipped with the skills and necessary knowledge in negotiating and successfully managing the contract and procurement processes for a project.

This course develops student with necessary knowledge and skills in managing risk and becoming good project manager. Project managers are required to possess a wide range of knowledge and skills, including time management, budget analysis, interpersonal and communication skills as well as risk management competencies. In this course, students willbe exposed to the Project Life Cycle in assessing risk management process. The discussionwill cover input and output from risk identification, quantification, response development as well as risk control.

Realistic schedules and budgets for every project is crucial and perhaps one of the most challenging aspects in project planning. This to ensure that project could be delivered within teh agreed time, reasonable cost and manageable constraints. On the other hand, studies show that majority of projetcs finish "Late" or "Over Budget". Such scenarios make project managers and his team fail in the eyes of key stakeholder, unable to deliver as what is expected by their clients and less support to the business objectives. Further, attempting to meet impossible deadlines and budgets leads to unplanned product shortfalls that cause long term support and utilization problems.

As a matter of fact, this course attempts to explain the importance of estimation and scheduling process in the project planning. The discussion will focus on approach and strategies in developing viable schedules and cost estimation which is influence the business success projects, products and organizations.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BPP3413

BPP3613

BPS3413

BPS3423

Code

PROJECT MANAGEMENT TOOLS

STAKEHOLDER MANAGEMENT

CONSTRUCTION SAFETY

EXPOSURE MEASUREMENT TECHNIQUES AND ANALYSIS

Course Name

01

01

01A

01A

01B

01B

01

01

01

01

01

01

01

01

01A

01A

Sec

TUE

TUE

THU

THU

FRI

FRI

WED

WED

THU

TUE

TUE

WED

MON

MON

MON

MON

Day

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

14:00-14:50

08:00-08:50

09:00-09:50

10:00-10:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

Time

T-DK-01

T-DK-01

FKPPT-01A

FKPPT-01A

FKPPT-01A

FKPPT-01A

T-DK-06

T-DK-06

T-DK-06

T-DK-05

T-DK-05

T-DK-06

T-DK-03

T-DK-03

FT-L-01

FT-L-01

Loc

L

L

B

B

B

B

L

L

L

L

L

L

L

L

B

B

Mode

60

60

30

30

30

30

60

60

60

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

Y

Y

Y

Y

Y

Y

N

N

N

N

Exam

BPP2113

BPP2113

BPP2113

BPP2113

BPP2113

BPP2113

BPS1113

BPS1113

BPS1113

BPS1423

BPS1423

BPS1423

BPS1423


Project Management Tools course aims to endow students with knoweldge as well as practical experiences in managing a project using selected project management software. The ultimate goal of this course is to show how elements of project management can be made more predicatable and scientific through the use of structured system and integrated tools. Selected project management tools/software will be introduced during the lab session to grant student with necessary knowledge and skills in dealing with stages of the project lifecycle, how to work within organizational and cost constraints, manage resource and project team effectively.

Business is about how customers, suppliers, employees, financiers (stockholders, bondholders, bank etc), communities, the media and managers interact and create value. In this subject, concrete principles and practical techniques for managing stakeholder relationships in order to ensure a firm¿s survival, reputation and success will be learnt.

This course is designed for persons who work in the contruction industry. This course will provide all members with greater safety contruction field particularly refered to contruction safety awareness. It also designed to increase their confidence in the action to take in case of any emergencies. The stages of contruction and most of the building process within the life cycle of a building will be elaborated. All the relevant document and acts particularly relating to Malaysia scenario a among the important references that will be discussed along with the sequence of building contruction. Student are expected to venture into a general safe working practices at contruction site and able to supervise the total environment as a free accident area.

This course is for advanced in depth study of the approaches to workplace and personel exposure sampling. Emphasis is on statistical sampling methods, passive monitoring, colorimetric devices, breathing zone, area sampling strategies, monitoring and surveillance techniques. Course work will include laboratory exercises and field work. This course is also designed to assist student in understanding the various instruments that are utilized in industrial hygiene studies and give them the chance to fully understand the way these instruments are calibrated and applied



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

3

Year

BPS3433

BPS3443

BPS3453

BPS3613

BPS3623

Code

APPLIED MECHANICS FOR SAFETY

HUMAN FACTOR IN SAFETY ENGINEERING

ACCIDENT AND INCIDENT INVESTIGATION AND ANALYSIS

SOLID WASTE MANAGEMENT

AIR POLLUTION CONTROL TECHNOLOGY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01A

01A

Sec

WED

WED

THU

THU

THU

FRI

MON

MON

TUE

THU

FRI

FRI

TUE

TUE

THU

THU

Day

11:00-11:50

12:00-12:50

10:00-10:50

15:00-15:50

16:00-16:50

08:00-08:50

10:00-10:50

11:00-11:50

16:00-16:50

14:00-14:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

11:00-11:50

12:00-12:50

Time

T-DK-03

T-DK-03

T-DK-03

T-DK-01

T-DK-01

T-DK-04

T-DK-04

T-DK-04

T-DK-05

T-DK-04

T-DK-06

T-DK-06

T-DK-03

T-DK-03

FKPPT-L-28

FKPPT-L-28

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

Mode

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BUM2123

BUM2123

BUM2123

BPS2433

BPS2433

BPS2433

BPS1113

BPS1113

BPS1113


-

An analysis of the man-machine relationship and the biological, physiological and psychological factors that contribute to accident causation; examination of theoretical and applied research findings.

-

This course introduces the students to elements of solid waste management systems, whichinclude generation, on-site handling, collection, transportation, treatment and disposal. Aspects to be discussed include methods of waste classification, categorization and listing, handling of waste at source, collection and transportation of waste, waste treatment technologies including waste minimization and recycling, and final disposal technologies. Current and legal issues on solid waste management both from local and international perspectives will also be discussed.

The topics in this course discuss several important aspects of air pollution that include classification and sources of air pollutants, their effects towards human, vegetation and material. Sampling methods, pollution control and air quality management system will be discussed.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

3

Year

BPT3113

BPT3123

BPT3133

BPT3153

Code

MANAGEMENT OF TECHNOLOGY

INDUSTRIAL LOGISTICS

PROCUREMENT IN INDUSTRIAL MANAGEMENT

CREATIVITY AND INNOVATION

Course Name

01

01

01

02

02

02

01

01

01

01

01

01

01

01

01A

01A

01B

01B

Sec

TUE

TUE

WED

THU

FRI

FRI

THU

FRI

FRI

THU

FRI

FRI

TUE

TUE

WED

WED

MON

MON

Day

11:00-11:50

12:00-12:50

12:00-12:50

12:00-12:50

15:00-15:50

16:00-16:50

15:00-15:50

08:00-08:50

09:00-09:50

14:00-14:50

10:00-10:50

11:00-11:50

14:00-14:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

T-DK-04

T-DK-04

T-DK-04

T-DK-01

T-DK-04

T-DK-04

T-DK-02

T-DK-02

T-DK-02

T-DK-03

T-DK-02

T-DK-02

T-DK-06

T-DK-06

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

Mode

60

60

60

60

60

60

60

60

60

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N


This subject is intended to give an understanding on the concept of technology managementand its application to organization particularly business firm. The topics to be covered are : Introduction to Management of Technology, The Role of Technology in the Creation of Wealth, Critical Factors in Managing Technology, MOT New Paradigms, Technology Life Cycles, The Process of Technological Innovation, Competitiveness, Business Strategy & Technology Strategy, Technology Planning and Technology Transfer.

-

This subject is aimed to provide the understanding of procurement management in industrialsector. It focuses on the management of the procurement, Purchasing Procedures and Systems Contracting, Order Management, Supplier Selection and Evaluation, Price/Cost Analysis and Negotiation Strategies, Relationship Management, E-Procurement, and Special Purchasing Applications.

This subject is intended to help students develop or enhance their own creativity, to understand the relationship between creativity and innovation, and finally, to explore how business organisations foster and inhibit creativity for competitiveness and commercialisation.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

3

3

3

4

4

Year

BPT3413

BPT3423

BPT3613

BPP4113

BPP4123

Code

OPTIMIZATION METHODS

PRODUCTION PLANNING AND CONTROL

TECHNOLOGY ASESSMENT

PROJECT COMMUNICATION & NEGOTIATION

CONTRACT LAW

Course Name

01

01

01

01

01

01A

01A

01B

01B

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

WED

WED

TUE

TUE

MON

MON

THU

THU

FRI

TUE

TUE

THU

WED

WED

WED

Day

10:00-10:50

11:00-11:50

08:00-08:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

16:00-16:50

17:00-17:50

17:00-17:50

11:00-11:50

12:00-12:50

14:00-14:50

10:00-10:50

11:00-11:50

12:00-12:50

Time

T-DK-06

T-DK-06

T-DK-06

T-DK-04

T-DK-04

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

T-DK-02

T-DK-02

T-DK-02

T-DK-05

T-DK-05

T-DK-05

T-DK-02

T-DK-02

T-DK-02

Loc

L

L

L

L

L

B

B

B

B

L

L

L

L

L

L

L

L

L

Mode

60

60

60

60

60

30

30

30

30

60

60

60

60

60

60

60

60

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPP3143BPP3133BPP3143BPP3133BPP3143BPP3133

BPP3133

BPP3133

BPP3133


The course will expose and develop skills in the theory, algorithms, and application of optimization techniques. Optimization methodologies include linear programming, network optimization, integer programming, decision trees, and dynamics programming. The methods have application to logistics, manufacturing, transportation, marketing, project management, and finance.

The subject covers the planning and controlling of production in industrial management including the topics of JIT, MRP, MRPII, ERP, production system design, analytical techniques and concepts of production and process control.

This subject is intended to provide students with the opportunity to:-¿ Understand the importance of technology assessment in corporate strategic planning;¿ Understand the critical elements of technology assessment; and¿ Learn and apply tools and techniques related to technology scanning, technology impacts,strategic technology analysis, technology road mapping, technology forecasting, and measuring technology performance.

-

-



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

4

Year

BPP4133

BPP4524

BPS4113

BPS4413

BPS4423

Code

STRATEGIC MANAGEMENT


OCCUPATIONAL SAFETY AND HEALTH LEGISLATION

PROCESS SAFETY AND LOSS PREVENTION

OCCUPATIONAL EPIDEMIOLOGY AND DISEASE

Course Name

01

01

01

01

01

01

01

01

01

01

01

01

01

01

01

Sec

MON

MON

THU

WED

WED

THU

THU

THU

TUE

TUE

THU

MON

MON

TUE

TUE

Day

14:00-14:50

15:00-15:50

09:00-09:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

10:00-10:50

10:00-10:50

11:00-11:50

16:00-16:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

Time

T-DK-01

T-DK-01

T-DK-03

T-DK-04

T-DK-04

T-DK-02

T-DK-02

T-DK-02

T-DK-06

T-DK-06

T-DK-06

T-DK-05

T-DK-05

FT-L-01

FT-L-01

Loc

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

Mode

60

60

60

53

53

30

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Exam

BPP1113

BPP1113

BPP1113

BPP3522

BPP3522

BPS1433

BPS1433

BPS1433

BPS1443BPF3313BUM2413BPS1443BPF3313BUM2413BPS1443BPF3313BUM2413BPS1443BPF3313BUM2413


Organizations especially business orgnizations create conditions to survive and grow in the future. While day to day activities are important but they can not come at the expense of long term survival and growth becuase their stakeholders make demand on managers to full fill their expectations. In order to do that they chart vision and mission, goals and objectives which are the longterm directions of the organization. They formulate and implement strategies to meet the directional goals. They evolve and plan bsuiness and corporate level strategies, devlop structures and systems to implement these strategies including inetrnational strategies, use mergers and acquisitions and form strategic alliances with partners and competitors. This course covers and fills this gap in the program. This course isintegrative in nature and world over is taught in final years of program

Final Year Project is intended to give an exposure to the students on the process of conducting academic reserach in their respective area of study such as Industrial Technology Management, Project Management, and Occupational Safety and Health. Final Year Project consists of FInal Year Project I and Final Year Project II. The students are expected to prepare and present their research/project proposal.

-

-

This course will expose the students to basic principles of epidemiology necessary to understand scientific literature, monitor data in industry, and/or to conduct scientific investigations or surveillance activities. This course will emphasize on aspects of disease transmission and causation, occurrence of disease, determining the cause of disease and estimating risk. The major types of epidemiologic study (cohort, case referent and cross-sectional) will be described. Threats to validity and issues in interpreting epidemiologic data such as bias, confounding factors, and random error will be discussed. Communicable and non-communicable diseases plus epidemiologic surveillance will be also discussed for preventing and controlling diseases. Students will also learn how to review a number of published articles related to epidemiologic issues.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

4

Year

BPS4514

BPS4613

BPT4113

BPT4413

Code


WASTEWATER TREATMENT TECHNOLOGY

STRATEGIC MANAGEMENT

MANUFACTURING TECHNOLOGY

Course Name

01

01

01

01

01

01

01

01

01

01

01

01A

01A

01B

01B

Sec

WED

WED

WED

WED

FRI

FRI

MON

MON

TUE

MON

MON

TUE

TUE

THU

THU

Day

16:00-16:50

17:00-17:50

11:00-11:50

12:00-12:50

15:00-15:50

16:00-16:50

16:00-16:50

17:00-17:50

12:00-12:50

08:00-08:50

09:00-09:50

16:00-16:50

17:00-17:50

15:00-15:50

16:00-16:50

Time

T-DK-05

T-DK-05

T-DK-06

T-DK-06

FT-L-01

FT-L-01

T-DK-06

T-DK-06

T-DK-06

T-DK-06

T-DK-06

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

Loc

L

L

L

L

B

B

L

L

L

L

L

B

B

B

B

Mode

30

30

30

30

30

30

60

60

60

60

60

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N



This course gives the students exposure to the physical, biological and chemical processes that are used in the treatment of wastewater. Process design calculation for specific processes will be stressed. Examples of the use of these processes in the manufacturing sector and agriculture including low waste zero discharged technology also will be discussed. The environmental laboratory is introduced to students the important of scientificanalysis of the wastewater as part of environmental impact assessment. This is to curb the damaged done to the purity of water and to be able to reduce the level of pollution into the surrounding living space particularly involving the quality of river

Organizations especially business orgnizations create conditions to survive and grow in the future. While day to day activities are important but they can not come at the expense of long term survival and growth becuase their stakeholders make demand on managers to full fill their expectations. In order to do that they chart vision and mission, goals and objectives which are the longterm directions of the organization. They formulate and implement strategies to meet the directional goals. They evolve and plan bsuiness and corporate level strategies, devlop structures and systems to implement these strategies including inetrnational strategies, use mergers and acquisitions and form strategic alliances with partners and competitors. This course covers and fills this gap in the program. This course isintegrative in nature and world over is taught in final years of program

The subject is intended to introduce manufacturing processes as used by industries to transform raw material to a final product: covering basic principles in metal forming, casting, joining and machining processes. The subject also covers other essential processes such as bulk deformation processes, powder metallurgy and surface treatments.Besides theoretical learning, students are also will be exposed to the practical experiences related to basic manufacturing works which are common to the production industries.



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level

4

4

4

Year

BPT4423

BPT4514

UGE2002

BTU1001

Code

MANUFACTURING DESIGN


TECHNOPRENEURSHIP

PHYSICS LABORATORY

Course Name

01

01

01A

01A

01B

01B

01

01

01G

01G

02G

02G

03G

03G

04G

04G

05G

05G

06G

06G

01A

01A

01A

02A

02A

02A

03A

03A

03A

Sec

TUE

TUE

FRI

FRI

THU

THU

WED

WED

MON

MON

MON

MON

TUE

TUE

TUE

TUE

WED

WED

THU

THU

THU

THU

THU

MON

MON

MON

WED

WED

WED

Day

10:00-10:50

11:00-11:50

09:00-09:50

10:00-10:50

09:00-09:50

10:00-10:50

16:00-16:50

17:00-17:50

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

10:00-10:50

11:00-11:50

12:00-12:50

10:00-10:50

11:00-11:50

12:00-12:50

08:00-08:50

09:00-09:50

10:00-10:50

Time

T-DK-01

T-DK-01

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

FKPPT- L-08

T-DK-06

T-DK-06

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

W-DKU-S-01

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

FIST-L-PL

Loc

L

L

B

B

B

B

L

L

L

L

L

L

L

L

L

L

L

L

L

L

B

B

B

B

B

B

B

B

B

Mode

60

60

30

30

30

30

58

58

120

120

120

120

120

120

120

120

120

120

120

120

30

30

30

30

30

30

30

30

30

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-


-

-



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

Campus

DEGREE

Level Year

BTU1004

BTU1011

BTU1013

Code

PHYSICS

CHEMISTRY LAB

CHEMISTRY

Course Name

01

01

01

01

02

02

02

02

01A

01A

01A

02A

02A

02A

03

03

03

01

01

01

01

02

02

02

02

Sec

MON

MON

TUE

TUE

TUE

TUE

MON

MON

TUE

TUE

TUE

TUE

WED

WED

WED

THU

THU

THU

THU

THU

THU

MON

MON

TUE

TUE

MON

MON

TUE

TUE

Day

08:00-08:50

09:00-09:50

08:00-08:50

08:00-08:50

09:00-09:50

09:00-09:50

14:00-14:50

15:00-15:50

14:00-14:50

14:00-14:50

15:00-15:50

15:00-15:50

09:00-09:50

10:00-10:50

11:00-11:50

10:00-10:50

11:00-11:50

12:00-12:50

14:00-14:50

15:00-15:50

16:00-16:50

14:00-14:50

15:00-15:50

14:00-14:50

15:00-15:50

08:00-08:50

09:00-09:50

08:00-08:50

09:00-09:50

Time

W-DK-14

W-DK-14

Y-DK-05

Y-DK-05

Y-DK-05

Y-DK-05

W-DK-12

W-DK-12

T-DK-03

T-DK-03

T-DK-03

T-DK-03

FT-L-01

FT-L-01

FT-L-01

FT-L-01

FT-L-01

FT-L-01

FT-L-01

FT-L-01

FT-L-01

T-DK-06

T-DK-06

Y-DK-05

Y-DK-05

FT-MR

FT-MR

T-DK-04

T-DK-04

Loc

L

L

T

T

T

T

L

L

T

T

T

T

B

B

B

B

B

B

B

B

B

L

L

T

T

L

L

T

T

Mode

45

45

30

45

30

45

45

45

30

45

30

45

30

30

30

30

30

30

30

30

30

45

45

45

45

45

45

45

45

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

N


-

-

-



13-AUG-12 03:14 PM

FTec

Faculty

GAMBANG

PEKAN

NO TIMETABLE

Campus

DEGREE

DEGREE

DEGREE

Level

4

3

3

Year

BTU1023

UGE2002

BPP3522

BPS3512

Code

TRIGONOMETRY & ELEMENTRYFUNCTIONS

TECHNOPRENEURSHIP



Course Name

01

01

01

01

02

02

02

02

07P

07P

08P

08P

09P

09P

10P

10P

11P

11P

01

01

Sec

WED

WED

THU

THU

TUE

TUE

THU

THU

MON

MON

TUE

TUE

WED

WED

THU

THU

THU

THU

Day

08:00-08:50

09:00-09:50

14:00-14:50

15:00-15:50

10:00-10:50

11:00-11:50

08:00-08:50

09:00-09:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

20:00-20:50

21:00-21:50

Time

T-DK-05

T-DK-05

T-DK-01

T-DK-01

T-DK-06

T-DK-06

T-DK-04

T-DK-04

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK1

E00DK2

E00DK2

Loc

L

L

T

T

L

L

T

T

L

L

L

L

L

L

L

L

L

L

Mode

45

45

45

45

45

45

45

45

100

100

100

100

100

100

100

100

100

100

0

60

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

Y

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

N

N

N

N

Exam

BPF2113BPF3313BUM2413


-

-

Final Year Project is intended to give an exposure to the students on the process of conducting academic research in their respective area of study such as Industrial Technology Management, Project Management, or Occupational Safety and Health. Final Year Project consists of Final Year Project I (BP*3512/3522) and Final Year Project II (BP*4514/4524).

This subject is intended to give an exposure to the students on the process of conducting academic research in their respective area of Project Management. The students are expected to prepare and present their research/project proposal.


This subject is intended to give an exposure to the students on the process of conducting academic research in their respective area of Occupational Safety and Health. The studentsare expected to prepare and present their research/project proposal



13-AUG-12 03:14 PM

FTec

Faculty

NO TIMETABLE

Campus

DEGREE

Level

3

4

4

4

4

Year

BPT3512

BPP4528

BPP4534

BPS4534

BPT4534

BPS4538

BPT4538

Code


INDUSTRIAL TRAINING




INDUSTRIAL TRAINING

INDUSTRIAL TRAINING

Course Name

01

01

01

01

01

01

01


0

4

4

1

4

1

2

Cap

TBA

TBA

TBA

TBA

TBA

TBA

TBA

Staff

N

N

N

N

N

N



This subject is intended to give an exposure to the students on the process of conducting academic research in their respective area of Industrial Technology Management. The students are expected to prepare and present their research/project proposal

This course aims to give chances for the student to practise and apply their knowledge and skills that they gain during their study. During the placement, we expect students to keep a log book, in which they make a regular entries describing the work they are undertaking. Student are supervised by industrial and university supervisors to guide and ensure they cando their work as good as possible and achieve the objective for this course.

During the placement, we expect students to keep a log book, in which they make a regular entries describing the work they are undertaking. Then, student need to provide industrial training report to describe their technical and personal development during their placement. The industrial training report need to hand in to the university supervisor. Student need to dofinal presentation for assessment.






Date post:	27-Oct-2014
Category:	Documents
Upload:	fu-hong
View:	91 times
Download:	3 times

Course Catalog

Documents