COURSE DIRECTORY (2014) - uetmt.ae particularly in the Oil & Gas Industry. UETMT-Course Directory...

UETMT-Course Directory 2014

Downstream (Oil and Gas)

COURSE DIRECTORY (2014)


To provide state-of-the-art Training and Consultancy Services

To enable organizations to remain competitive in Today’s

Competitive Environment

1

UETMT- Course Directory 2014

About UETMT

* Vision

* Mission

* Core Value

* Core Services

* Quality Matters

Course Methodology

Courses Categories

Courses Titles

NASP Certified HSE Courses

Course Booking

Location Map

Course Directory Index

2 2


About UETMT United Eastern Technical and Management Training

• United Eastern Technical and Management Training (UETMT) is a fully-

integrated Training and Consultancy Company, commercially registered

under Professional License No. (679871) government of Dubai, United

Arab Emirates.

3

• UETMT is a subsidiary company from the United Eastern

Group- (UEG) – based in Abu Dhabi, UAE. as the parent

company has been active in the region since 1976.

• The company is consisted by a group of Professionals, Consultants,

Executives, and Practitioners who have standing long experience records

as well-known Experts in specific areas of Technical and Management

Development, particularly in the Oil & Gas Industry.


• United Eastern Technical and Management Training (UETMT) in

cooperation with the Best of the Best UK based Learning Organizations,

Academy and Universities set up regional and International Oil and Gas

Training Services in Abu Dhabi and Dubai focusing primarily on the Oil

and Gas Industry worldwide.


4

• United Eastern Technical and Management Training (UETMT) is

primarily involved in Oil and Gas Training, Development, Human

Capital and Talent Acquisition

• UETMT is under process with (SQA) Approved Center

and Certification of Training Program


• Establishing United Eastern Technical and Management Training (UETMT), Oil

and Gas Centre of Expertise will not only serve the UAE, but also will focus and

cover all Gulf Countries, Middle East and the Far East, as well as the North Africa.

Thus, will be a regional talent competency hub focusing primarily on the Oil and

Gas Industry.


5

• The Value of our business includes Courses: Accredited,

Customized, In-house, Short-Term, Technical, Non-Technical

Training Courses; Consultancy Expertise; Competency and

Capability Assurance.

• United Eastern Technical and Management Training (UETMT) will be committed

to supporting the trainees efforts towards sustainable development. We will

prioritize development and empowerment of the UAE nationals through our

educational and training initiatives to transform them into professionals in the Oil

and Gas Industry.


To ensure a Competent, Qualified, and highly Motivated Workforce

focused on achieving the critical outcomes, through the Development

and Administration of Cost-effective and result-oriented Human

Resource and Occupational Training,

Vision

6

programs Services, and practices by

promoting social and Human

Resources Development and by

preparing the National Workforce to

serve Industrial and Technological

Growth.


Our mission is to facilitate the Community and Staff members of our

clients towards meeting their responsibilities and tasks.

Mission

7

Supported by a team of highly experienced

specialists and maintaining an open vision for

the ever changing trends and maintaining the

upmost standards. The UETMT will strive to

provide an unparalleled Competent

Workforce, permanently lowering your

Operating Costs and contributing to meeting

Organizational Goals.


We believe in demonstrated

Competence, Institutional

Integrity, Personal

Commitment and deep

sense of Nationalism.

Values

8


United Eastern Technical and

Management Training is

primarily involved in Oil and

Gas Training, Development,

Human Capital and Talent

Acquisition.

Core Services

Core Services

9


United Eastern Technical and Management Training

delivers is a mixture of Standard Courses ranging from 1-

day computing courses to bespoke, off-the-shelf Oil and

Gas Training Programs of over a year’s duration tailored to

an Individual Organization's requirements. Courses may

be attendance only, assessed against specific client needs or

courses that lead to recognized National and/or

International Qualifications.

Core Services

10


UETMT Management formally apply for Approved

Centre Status with appropriate Oil and Gas Training

awarding bodies such as SQA. UETMT continue to

develop and improve to meets a number of other

Quality Standards.

Quality Matters

11


Strategic Goals

12

• Define Core Curriculum based on Competencies of market Corporate needs

• Conduct on going Evaluations / Assessments of Programs

• Determine delivery methods and Sources

• Offer Training / Learning Opportunities to meet Organizational Needs

• Consistently align with Operations and Project Workforce Planning

Requirements

• Skills Enhancement Process (SEP) for continuous Development

• Each Individual will have a Skills Enhancement Training Plan

• On-Job Learning supported by focused Technical Training.

• Build a Competent Workforce

• Build a Competency base Integrated System for

Managing and Assessing Performance

• Provide Training to Transfer knowledge and Develop Skills


Course Methodology

13

• These courses can be introduced in English or Arabic Language

according to trainees requirements

• The course material are available in English or Arabic Language

according to Trainees requirements

• These courses are supported by Simulators Software's (if possible) like

SIMTRONIC, UHDE

• Every course will include practices, Case Studies and workshops

(if possible)

Every Course will be include

• 60% Lectures

• 30% Workshop /Simulators

• 10% Case Studies


Courses Categories

14

Oil and Gas Processing Foundations & Principles Section (A):

Surface Production Operations (Oil)

Section (H):

Section (B):

Surface Production Operations (Gas) Section (C):

Oil Refining, Petrochemicals, Fertilizers Process Technologies & Operations Section (D):

Laboratory Section (E):

Maintenance

Section (F ): On-Job-Training (OJT)

Section (G): Safety


Courses Categories

Fundamentals Courses or Generals Courses

15

• To train Operators / Engineers in Multidiscipline who have joined recently

Oil and Gas Industry to work in Operation or Maintenance.

• These courses are available as Training School which contains necessary

courses or package from A to Z for Operators or Engineers.

• These courses are supported by Advanced Simulations Software's like

HYSYS, Aspen Plus, CHEMCAD, Pro2

• Every course will contain Pre-assessment and Post-assessment for Trainees

as evaluation and what they gained after completion of the program

• The course duration is 40 hr or 5 days or more according to agreements and

the training school can be prolonged for 40 days

• The course outlines can be modified according to trainees requirements &

based upon their experience & training requirements


Section (A): Oil and Gas Processing Foundations & Principles

16

1. Overview of Oil & Gas Industry

2. Crude Oil Chemistry and Gases Behavior

3. Basic of Petroleum Industry

4. Fluid Flow and Fluid Properties in Oil and Gas Industry

5. Fundamentals of Equipment Selection and Operation in Oil & Gas Industry

6. Static and Rotary Equipment (Process Point of View)

7. Basic of Pump Technology, Operation, Performance

8. Steam Traps, Pipelines & Steam Generation System

9. Heat Exchangers Operation, Design, Maintenance and Troubleshooting

10. Gas Compressors Operation, Design and Troubleshooting

11. Basics of Rotating Equipment Operation & Maintenance

12. Fired Heater Operation, Selection, Design and Troubleshooting

13. Heat Transfer Equipment Operation, Start up, Commissioning (Heat Exchanger, Fired

Heater, Condenser

14. Fundamentals of Field Instrumentation and Automatic Control

15. Compressors & Turbines Operation-Maintenance & Troubleshooting


Section (A): Oil and Gas Processing Foundations & Principles

17

16. Process Measurements (Level, Flow, Pressure, Temperature)

17. PFD, P&ID …. Process Drawing Reading

18. Fundamentals of Distillations in Oil and Gas Industry

19. Relieving & Flare System Operation

20. Valves Types and Selection

21. Fundamentals of Corrosion and Corrosion Control in Oil and Gas Industry

22. Waste and Oily Water Treatment

23. Hydrogen Sulphide (H2S) Gas Awareness Program

24. Flow Diagram & Control System Fundamentals (PID,PFD,UFD,…….)

25. Process Safety Engineering and LOPA Analysis

26. Basic Gas Chromatography - Principles and Applications

27. Petroleum Oil and Gases Wastes and Disposal

28. Pollution Prevention and Production Cleaner for Oil and Gas Industry

29. Closed Drain and Hot Oil System

30. Fuel Gas, Instrument Air, Nitrogen and Utilities

31. Steam Boiler Operation & Maintenance

32. Process Operations for Technicians


Section (B): Surface Production Operations (Oil)

18

1. Basic Crude Oil Processing and Desalting

2. Oil Treatment (Desalting, Dehydration & Stabilization)

3. Fundamentals of Oil & Gas Field Processing

4. Advanced Crude Oil Treatment

5. Paraffin and Asphaltenes Removal in Crude Oils

6. Surface Facilities Production Operations

7. Fundamental of Process Calculations

8. Hydrocarbon Storage, Shipping and Utilization

9. Chemicals Treatment in Oil and Gas Field Processing

10. Crude Oil Production and Wellhead Process

11. Process Panel Operator Assessment (DCS Operations, Process Control Fundamentals and using Life

Simulator

12. Mass and Heat Balance in Petroleum Industry

13. Operations Accidents Investigations

14. HAZOP Applications in Petroleum Industry (Level I)

15. HAZOP Applications in Petroleum Industry (Level II)

16. Plant Monitoring & Optimization

17. Risk Assessment within Production Operations


Section (C): Surface Production Operations (Gas)

19

18. Natural Gas Processing Technology

19. Advanced Natural Gas Processing Technology

20. Gas Plant Troubleshooting & Special Problems

21. Oil and Gas Separation Equipment

22. Basic / Advanced Gas Dehydration Technology

23. LPG, NGL & LNG Production and Handling

24. Process Plant Operations, Troubleshooting, Special Problems

25. LPG & Sour Gases Sweetening Amine Process & Regeneration System

26. Gas Processing Treatment and Sulphur Recovery

27. Hydrocarbon Dew Point Plant Operation, Design, Troubleshooting

28. Process Calculation and Simulation: by HYSYS

29. Propane Refrigeration System


31. Gas Driers Operation Design, Logic and Calculation

32. Basic Gas Chromatography - Principles and Applications

33. Principle of Compressor Operation and Troubleshooting


Section (C): Surface Production Operations (Gas)

20

34. Process Safety and Hazard Analysis (PHA & HAZOP)

35. Flare & Valuable Gases Recovery System

36. Screw Gas Compressors & Dry Gas Seals Application: Design, Construction,

Control & Operation

37. Planned Shutdown and Critical Activities, Isolation, Startup & Commissioning




41. Process Panel Operator Assessment (DCS Operations, Process Control

Fundamentals and using Life Simulator

42. Oil & Gas Operational Safety


44. Sulfur Recovery Engineering

UETMT-Course Directory 2014 16

Section (D): Oil Refining, Petrochemicals, Fertilizers Process Technologies & Operations

21

1. Fundamentals of Oil Refining Technology

2. Distillation Processes, Calculations and Multivariable Process Control.

3. Advanced Conversion Processing & Advanced Oil Refining Technology

4. Fundamental of Catalyst in Oil & Gas Industry (Evaluation, Operation. Regeneration,…..)

5. Continuous Catalyst Regeneration (CCR)

6. MEROX Processes

7. Hydro Treating Processes Technology

8. Gas and Liquid Driers Operation Design, Logic and Calculation

9. Naphtha Hydro Treatment (HDS & NHT)

10. Catalytic Reforming (CRU)

11. Catalytic Reforming: Modern Plat- Forming Process with Continuous Catalyst

Regeneration, CCR)

12. Blending Operations and Optimization

13. Operations & Troubleshooting of Refinery Facilities

14. Chemical Engineering for Non-chemical Engineers



22

15. PENEX Isomerization Process

16. Kerosene MEROX

17. LPG MEROX

18. Sour Water Stripping and Amines Regeneration System

19. LPG & Sour Gases Sweetening Amine Process & Regeneration System

20. Hydrocracker Technology

21. Crude Atmospheric and Vacuum Distillation

22. Process Safety and Hazard Analysis (PHA & HAZOP)

23. Process Operations, Troubleshooting for Technicians

24. Pumps; Centrifugal & Positive Displacement (Installation, Operation, Maintenance and

Troubleshooting) "Advanced

25. Refinery Process Units & Equipments Troubleshooting

26. Hydrocarbon Storage, Shipping and Utilization.

27. Plant Operation and Troubleshooting.

28. Fundamental of Process Calculations



23

29. Process Calculation and Simulation: by HYSYS.

30. Oil Water Treatment.

31. Crude Oil Desalting Operation, Design, Troubleshooting

32. Operations Accidents Investigations

33. Incident Investigation & Accident Prevention in Process

& Environmental Management System in Refinery

34. Oil & Gas Industry for Administration Team

35. Refinery Process Operations

36. Refinery Gas Treating, Sour Water, Sulfur & Tail Gas

37. Refinery Cracking Technology

38. Planned Shutdown and Critical Activities, Isolation, Startup & Commissioning

39. Fundamentals of Equipment Selection & Sizing, Operation in Oil & Gas Industry

40. Refinery-Petrochemical Integration & Economics

41. Overview of Oil, Gas & Petrochemicals Industry

42. Methods & Techniques for Crude Oil Evaluation



24

43. Modern Refinery Technology

44. Oil & Gas Operational Safety

45. Safe Process Start up and Shutdown

46. Hydrocarbon Losses in Oil and Gas Industry

47. Flare & Valuable Gases Recovery System

48. Petroleum Refinery for non Technical Persons

49. Understanding Success Factors in Petrochemicals Industry

50. Troubleshooting in Refinery Process Equipment

51. Tank Farm Off Site & Oil Movement

52. Tank & Tank Farms Design, Operations, Instrumentation, Inspection & Maintenance

53. Hydrocarbon and Sour Gases MEROX Process

54. LPG Production Technology, Gasoline Stabilization



57. Basic of Petrochemicals Industry

58. Basic of Fertilizers Industry



25

59. Gasoline Production and Quality Improvement Technology


61. Petroleum Products Specifications

62. Emergency and Process Shut-down (ESD and PSD)

63. Tower Internals

64. Oil Movement, Storage & Troubleshooting in Modern Refineries, Marine Terminals & Oil

Plants

65. Fundamentals of Ethylene & Propylene, Polypropylene and Polyethylene Industry

66. Petroleum Oil and Gases Wastes and Disposal

67. Process Safety Engineering and LOPA Analysis

68. LPG Production Technology (MEROX, Gasoline Stabilization, Processing & Conditioning,

Start up and Shutdown)

69. Process Plants Design, Calculation & Life Simulation SEMTRONIX

70. Process Panel Operator Assessment (DCS Operations, Process Control Fundamentals and

using Life Simulator)




26

72. Engineering Design for Process Safety

73. Planning & Economic for Refinery Operations


75. Introduction to Petrochemicals

76. L.P.G. Engineering Course

77. Modern Valve Technology

78. L.P.G. Design & Installation of Systems

79. Quality Control in Oil and Gas Production

80. Oil and Gas Operations: Environmental Concerns and Solutions

81. Steam Turbines Operation & Troubleshooting

82. Process Engineering for Non-process Engineering Professionals

83. Managing Shutdowns, Turnarounds and Outages

84. Crude Distillation Tower Operations

85. Emergency Handling Refinery Industry

86. International Oil Supply, Transportation, Refining & Trade

87. Process Operation & Troubleshooting and Optimization "Workshop"


Section (E): Laboratory

27

1. Crude Oil Testing & Equipment

2. Crude Oil Properties and Chemistry

3. Chemical Laboratory in Oil and Gas Industry

4. Universal Tests for Petroleum and Petroleum Products

5. Water Treatment Chemicals

6. Desalting & Emulsion Treating

7. Choice and Evaluation of Chemical Treatment for Oil and Gas

8. Process Engineering for Non-process Engineering Professionals

Section (F): On Job Training

1. OJT in Refinery Distillation & Oil Treatment Units

2. OJT in Refinery Utilities Unit

3. OJT in Refinery Catalytic Reforming Unit

4. OJT in Refinery Isomerization Unit

5. OJT in Refinery Hydro Treating and Hydro Cracking Unit

6. OJT in Gas Processing Technology

7. Process Field Operator/ Panel Operator Schools (OJT)

UETMT-Course Directory 2014 17 16

Section (G) : Safety

28

1. Advanced Process Risk Assessment & Risk Management

2. Advanced Process Risk Assessment

3. Process Hazard Analysis (PHA) for Team Leaders



6. Work Permit System



9. Wastes Disposal in Oil and Gas Industry

10. Safe Isolation of Process Plant Equipments

11. Scaffolding Review and Inspection

12. Golden Rules for Process Safety

13. Emergency Management Planning

14. NEBOSH International Technical Certificate in Oil and Gas Operational Safety


Section (H): Maintenance:

29

1. Advanced Maintenance Management

2. Advanced Reliability Centered Maintenance

3. API 579-1 ASME FFS-1: Fitness for Service: Pressure Vessels, Tanks & Piping

System

4. Compressors & Turbines Operation-Maintenance & Troubleshooting

5. Maintenance Auditing, Benchmarking & Improvement

6. Maintenance Management-Developing & Enhancing Maintenance Strategies

7. Maintenance Planning, Scheduling & Work Control

8. Managing Shutdowns, Turnarounds and Outages

9. Pumps & Compressors: Predictive Maintenance & Troubleshooting

10. Steam Boiler Operation & Maintenance

11. Screw Gas Compressors & Dry Gas Seals Application: Design, Construction,

Control & Operation


Certified HSE Courses

30

List of NASP Certified Courses :

1. Blood borne Pathogens

2. Confined Space Entry

3. Electrical Safety Ergonomics

4. Hazard Communication

5. Hazardous Materials

6. Inspections

7. Lockout -Tagout

8. Machine Guarding

9. Materials Handling

10. Egress/Fire Safety

11. PPE

12. Record Keeping (not for International Students)

13. Workplace Violence

14. Walk/Work Surfaces

15. Weld/Cut/Braze

16. Other NASP Topical Courses the STS Has Successfully

Completed


NASP Certified HSE Courses

31

The Certified Safety Trainer Specialist

• Trainers holding the NASP (IASP) STS (Safety Training

Specialist) Certificate are Authorized to conduct a variety of

Safety Training Programs and to issue NASP (IASP) Wallet Cards

and Certificates as follows:

1. NASP 10 and 30 hour Courses for General Industry.

2. Any Topic of the list.

3. The Occupational Safety and Health Basic Diploma (any six of

the previous topical courses):

4. The Occupational Safety and Health Advanced Diploma (all of

the following topics):


About NASP- IASP Certification

32

• NASP: (National Association of Safety Professionals) in USA and its International branch – IASP (International Association of

Safety Professionals) is a non-profitable organization providing safety training, safety certification, training materials and association membership.

• NASP: is approved by the US Department of Veterans Affairs as a certifying agency. Also NASP (IASP) obtained recently the approval of the United Nations (UN).

• NASP: (IASP) Certifications are accepted worldwide (in 42 Countries) and are accepted by the US Federal Government, State Governments, Local Governments and major businesses and industries in USA.


Send us your Information:

To obtain detailed program information, schedules,

and locations, please visit our website www.uetmt.ae

We also invite you to contact our Training &

Development Manager, who is available to facilitate

registration and answer any training questions you

have

Sherine Abdel Hamid Ali

Training & Development Manager

e-mail: [email protected] / [email protected]

Mobile : +971-55 38 55 215

Tel : +971-4-221-99-11

Fax : +971-4-222-66-42

P.O. Box 8670, Dubai, UAE

How To Book

33

1- Program Title:

Date:

Location:

2- Your Details

Mr./Mrs.

Position:

Company:

Country:

Mobile:

Phone:

Fax:

E-mail:

mailto:[email protected]






UETMT- Course Directory 2014

Location Map

Address: P.O. Box 8670, Dubai, UAE Banyas Road, Al Salemiyah Tower, 1003 Tel: 00971-4-221-99-11 Fax: 00971-4-222-66-42

34

E-mail: [email protected]

[email protected]

Website: www.uetmt.ae


Date post:	04-Jul-2018
Category:	Documents
Upload:	hoangdung
View:	219 times
Download:	0 times

COURSE DIRECTORY (2014) - uetmt.ae particularly in the Oil & Gas Industry. UETMT-Course Directory...

Documents