All NOGA products meet the strict requirements of ISO9001 and ISO14001.
We invite you to visit our web site: www.noga.com for more information.
NOGA reserves the right to make changes in any of its products without prior notice.
© Copyright 2010 by NOGA Engineering & Technology (2008) Ltd.
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrievalsystem, translated into any language or computer language, or be transmitted in any form whatsoever without the
prior written consent of the publisher.
CONTENTS
Preface 4
The right choice of a holder 5
Articulated holders FAT 6 -†7
(Fine Adjustment Top)
Articulated holders FAB 8 -†9
(Fine Adjustment Base)
PH holders FAT 10 - 11
PH holders FAB 12 - 13
Specialty holders 14 - 15
Sets and indicators 16 - 17
Bases 18 - 19
Modular holders 20 - 21
Accessories 22 - 23
page
SIMPLY SOPHISTICATED 3
holdingsystem
is proud to present its new line of holding systems.
These state of the art mechanical holders, are divided into two groups, ARTICULATED and PH, bothdesigned to hold dial and test indicators, as well as many other components.
holders are also used in many other fields such as: machine construction, medical instruments,photography, light, sound and more.
holders consist of three main parts:Arms, base and top (See diagram on right).
ARTICULATED HOLDERS - articulated arms, with central locking mechanism.
PH HOLDERS - post and arm, with unique 3 points clamp.
Each group of holders consists of four sizes of arms, so you can always find one to suit your needs.
holders have fine adjustment mechanism, whether it is on the top (FAT), or at the base (FAB).
The plastic fine adjustment and the 2SM are now replaced by our top fine adjustment which is made ofmetal, and is the only fine adjustment to hold 6mm, 8mm, 3/8", dove tail and back lug.
SPECIALTY HOLDERS - eight unique individual items. These are Noga well known items.
SETS - four sets of holders and indicators.
BASES - eight different magnetic bases from 320 N to 1300 N, a 350 N vacuum base, and five clamps.
MODULAR HOLDERS - another useful addition to this catalog is the modular holders section whichallows the user almost unlimited range of holding applications.
Accessories - A variety of accessories are shown. Custom made accessories are available uponrequest.
SIMPLY SOPHISTICATED4
THE RIGHT CHOICE OF A HOLDER
• Choose the kind of arms needed, articulated or PH (post holder).
• When zero-setting is very important, use fine adjustment at base (FAB).In all other cases use fine adjustment on top (FAT).
• Decide what kind of base you want. Magnetic, vacuum or others.
• Depending on the type of indicator and job to be inspected, choose eitherstandard clamp or NOGA fine adjustment with unique swivel clamp.
• Consult the relevant section in this catalog to choose the right holder.
SIMPLY SOPHISTICATED 5
TOP
ARMS
BASE
ARTICULATED PH
holdingsystem
NF61003 DG61003 MG61003 MA61003
SIMPLY SOPHISTICATED6
NOGAarticulated holders
withfine adjustment
on top
ARTICULATED HOLDERS FAT
Due to its stability and ease of use, NOGA articulated holder hasbecome the industry most wanted.
• New fine adjustment on top with universal swivel clamp.
• Holds 6mm, 8mm, 3/8", dovetail and back lug.
• Central locking mechanism with NOGA designed spring loadedbearing.
• Five axis holder.
• Powerful on/off magnetic base.
• Instant fixation in any position.
• Fast and easy to set up gauges into required position.
• Black finished arms.
SIMPLY SOPHISTICATED 7
71 mmL3
D
L1
L2
BottomThread
NF61003
NF60103
DG61003
DG60103
MG61003
MG60103
MA61003
MA60103
Ext. M5
Ext. M5
Ext. M8
Ext. M8
Ext. M8
Ext. M8
Ext. M10 x 1.25
Ext. M10 x 1.25
320
–
800
–
800
–
1300
–
30
–
50
–
50
–
50
–
40
–
60
–
60
–
120
–
35
–
55
–
55
–
55
–
0.520
0.320
1.350
0.340
1.900
0.900
5.100
3.100
Order no. Bottom thread Force DimensionWeight
MagnetHolder
[Kg]D [N] W L H
56
56
110
110
133
133
326
326
Bottom arm
L1
Arm length
51
51
101
101
113
113
242
242
Top arm
L2
178
178
282
282
317
317
637
637
Total
L1 + L2 + L3
All measurements are in mm unless otherwise mentioned.
L
W
H
FA1510 see page 18
M6
75
Universal Swivel Clamp
ø4
ø63/8" ø8
Dovetail 1/4"
FA1500
holdingsystem
MG10503
DG10503
NF10403
SIMPLY SOPHISTICATED8
NOGAarticulated holders
withfine adjustment
at base
ARTICULATED HOLDERS FAB
NOGA has developed a unique fine adjustment mechanism which isplaced on the magnetic base. This mechanism allows the hand to reston the base rather than on the clamp of the indicator. Zero-settingbecomes faster than with any other mechanism.
• Unique single direction fine adjustment at base.
• Powerful on/off magnetic base.
• Holds 8mm or 3/8" and dovetail.
• Central locking mechanism with NOGA designed spring loadedbearing.
• Five axis holder.
• Instant fixation in any position.
• Easy to set up gauges into required position.
• Black finished arms.
SIMPLY SOPHISTICATED 9
BottomThread
NF10403
NF10433
DG10503
DG10533
MG10503
MG10533
320
320
800
800
800
800
30
30
50
50
50
50
40
40
60
60
60
60
35
35
55
55
55
55
FA1100
FA1120
FA1100
FA1120
FA1100
FA1120
Order no. Force DimensionOrder no.
MagnetHolder
[N] W L H
Arm length
51
51
101
101
113
113
Top arm
L2
128.5
128.5
232.5
232.5
267.5
267.5
Total
L1 + L2 + L3
All measurements are in mm unless otherwise mentioned.
56
56
110
110
133
133
Bottom arm
L1
0.520
0.520
1.400
1.400
1.900
1.900
Weight
[Kg]
Standard clamp
8
3/8”
8
3/8”
8
3/8”
Standardclamp
D
Standard clamp
W L
H
L1
L2 21.5mmL3
M6Dovetail 1/4"
D
Cat. no. FA1100 Dia 8mm and Cat. no. FA1120 Dia 3/8"
holdingsystem
PH6800PH6600 PH6400
SIMPLY SOPHISTICATED10
NOGAeconomical holders
with fine adjustmenton top
PH HOLDERS FAT
PH6400
PH6410
PH6600
PH6610
PH6800
PH6810
M8
M8
M8
M8
M10 x 1.25
M10 x 1.25
800
–
1000
–
1300
–
50
–
50
–
50
–
60
–
75
–
120
–
55
–
55
–
55
–
1.700
0.700
2.300
1.070
3.450
1.450
Order no. Bottom thread Force DimensionWeight
MagnetHolder
[Kg]D3 [N] W L H
NOGA PH (Post Holder) holders are the latest improvement of thetraditional indicator holder.
• New fine adjustment on the top with universal swivel clamp.
• Holds 6mm, 8mm, 3/8”, dovetail and back lug.
• Powerful on/off magnetic base.
• Strong arm lock by using 3 points clamp.
• Easy to set up gauges into required position.
• Black finished arms.
SIMPLY SOPHISTICATED 11
All measurements are in mm unless otherwise mentioned.
ø14 x 203
ø14 x 203
ø16 x 260
ø16 x 260
ø18 x 350
ø18 x 350
ø12 x 185
ø12 x 185
ø16 x 225
ø16 x 225
ø16 x 225
ø16 x 225
Post
Dia. (D1) xlength (L1)
Arm length and diameter
Dia. (D2) xlength (L2)
Arm
3 points clamp
PH0310
PH0310
PH0312
PH0312
PH0313
PH0313
Order no.
L
W
H
L3
D1
D3
L2
D2
L1
3 points clamp
see page 18
71mm
holdingsystem
PH3100 PH2040 PH4016
SIMPLY SOPHISTICATED12
BottomThread
NOGAeconomical holders
with fine adjustmentat base
PH HOLDERS FAB
PH3100
PH2040
PH4016
30
50
50
40
60
70
35
55
55
0.500
1.700
2.450
Order no. DimensionWeight
Magnet
[Kg] W L H
PH holders with NOGA unique fine adjustment at base.
• Single direction fine adjustment at base.
• Powerful on/off magnetic base.
• Universal swivel clamp for all dial and test indicators.
• Holds 6mm, 8mm, 3/8", dovetail and back lug.
• Strong arm lock by using 3 points clamp.
• Easy to set up gauges into required position.
• Black finished arms.
SIMPLY SOPHISTICATED 13
All measurements are in mm unless otherwise mentioned.
ø 10 x 120
ø 14 x 203
ø 16 x 260
ø 8 x 110
ø 12 x 185
ø 16 x 225
Post
Dia. (D1) xlength (L1)
Arm length and diameter
Dia. (D2) xlength (L2)
Arm
Holder
320
800
1000
Force
[N]
3 pointsclamp
Order no.
PH0315
PH0310
PH0312
Order no.
FA1210
FA1410
FA1410
Universalswivel clamp
3 points clamp
Universal swivel clamp
W
H
L
D1
L1
L2
D2
ø4 or ø6
ø63/8" ø8
Dovetail 1/4"
holdingsystem
NF1015 / NF1018
NF1022
MG71003
NF1021 / NF1024NF1030 / NF1033
SIMPLY SOPHISTICATED14
NF1021 8mm
NF1024 3/8”
• On/off switchable magnet.• Magnet dimensions - W30 x L40 x H35.• Magnet force - 320N.• Weight: 0.575 Kg.
• Permanent magnet.• Magnet dimensions - W16 x L60 x H32.• Magnet force - 280N.• Weight: 0.545 Kg.
• 5 axis holder.• 360° fine adjustment at base.• Holds indicator with stem and dovetail.• Central locking mechanism with NOGA designed spring loaded
bearing.• Bottom arm - 56mm.• Top arm - 51mm.• Black finished arms.
• Used for centering of workpieces.• Holds indicator with stem or dovetail.• Central locking mechanism with spring loaded bearing.• Bottom arm - 56mm.• Top arm - 51mm.• Centering rod ø 8mm x 40 mm.• Black finished arms.• Weight: 0.345 Kg.
• Universal fine adjustment, holds: 6mm, 8mm, 3/8”,dovetail and back lug.
• New fine adjustment on top with universal swivel clamp.• Holds 6mm, 8mm, 3/8", dovetail and back lug.• Central locking mechanism with NOGA designed spring loaded
bearing.• 5 axis holder.• Powerful on/off magnetic base.• Instant fixation in any position.• Fast and easy to set up gauges into required position.• Black finished arms.• Bottom arm - 163.5 mm.• Top arm - 113 mm.• Bottom thread - Ext. M8.• Magnet force - 800N.• Magnet dimensions - W50 x L60 x H55.• Weight: 1.950 Kg.
SPECIALTY HOLDERSIn respond to market demand NOGA offers 8 holders with special features.
NF1015 8mm
NF1018 3/8”
MG71003 universal
SIMPLY SOPHISTICATED 15
360° fine adjustment
Order no. Clamp
NF1030 8mm
NF1033 3/8”
NF1022 universal
holdingsystem
MG6150 Heavy duty holder set
Includes:MG61003DG1000
DG6150 Standard holder set
Includes:DG61003DG1000
SIMPLY SOPHISTICATED16
NF1036 Centering set
Includes:NF1022NF1000 Indicator
NF6150 Mini holder set
Includes:NF61003NF1000 Indicator
SETS&INDICATORS
NOGA offers four sets combining the most popular holders with theworld’s best made indicators.
SIMPLY SOPHISTICATED 17
NF6150
NF1036
DG6150
MG6150
Ext. M5
–
Ext. M8
Ext. M8
30
–
50
50
40
–
60
60
35
–
55
55
0.600
0.360
1.600
2.100
56
56
110
133
51
51
101
113
178
178
282
317
Order no. Bottom thread DimensionWeight
MagnetHolder
[Kg]D W L H
Bottom arm
L1
Arm length
Top arm
L2
Total
L1 + L2 + L3
All measurements are in mm unless otherwise mentioned.
Order no.
Indicators
NF1000
NF1000
DG1000
DG1000
• Dial diameter 58 mm.• Stem diameter 8 mm.• Measuring range 10 mm.• Graduations 0.01 mm.
• Lever-type test indicator, dialdiameter 39 mm.
• Measuring range 0.8 mm.• Graduations 0.01 mm.• Contact point 2 mm dia., 20.9 mm
length.• Three dovetails for clamping.
15.5
20.9
37
ø8
4830
W L
H
L1
L2
L371 mm
DG1000 NF1000
holdingsystem
DG0039NF0037
NF3778
DG0036
DG3678
DG0038
DG0118
SIMPLY SOPHISTICATED18
DG1003see page 19 DG0040
NOGAbases
BASES
Eight different magnets ranging from the world’ssmallest switchable on/off (320N) to a large magneticbase (1300N), a 350N vacuum base and 5 clampsare offered for our customers’ choice.
SIMPLY SOPHISTICATED 19
354030On/off magnetwith fine adj.
Type HLW
NF3778
Order no.
All measurements are in mm unless otherwise mentioned.
On/off magnet 354030NF0037
556050DG0036 On/off magnet
DG3678 55On/off magnetwith fine adj. 6050
On/off magnet 557550DG0038
On/off magnetwith fine adj. 557550DG0118
On/off magnet 5512050DG0039
557550DG1003 On/off magnet multi thread
DG0040 Vacuum base ø 92
MA0322 –4” clamp 100
MA0320 4” clamp 100
MG1006 3” clamp 75
MG1003 3” clamp 75
MG0125 3” clampwith plastic cover 75
–
–
–
–
–
–
–
–
–
L
W
H
L
L
– –
M5
Thread
M5
M8
M8
M8
M8
M10 x 1.25
M6/8/10/1210 x 1.25
M8
Ext. M10 x 1.25
Int. M10 x 1.25
Ext. M8
Int. M8
Int. M8
0.250
Weight [Kg]
0.230
1.000
1.100
1.270
1.380
2.000
1.350
0.400
1.150
1.160
0.570
0.600
0.600
320
Force [N]
320
800
800
1000
1000
1300
1000
350
–
–
–
–
–
W L
H
holdingsystem
NF60003 DG60003 MG60003 MG70003 MA60003
SIMPLY SOPHISTICATED20
MODULAR HOLDERS
Six different sizes of articulated arms are offered for a widerange of applications.
Choose the arms that fit your needs.
A number of accessories are shown on pages 18-19 and22-23.
Custom-made arms and accessories are available uponrequest. Minimum quantity 500 pcs.
SIMPLY SOPHISTICATED 21
LC60003
NF60003
DG60003
MG60003
MG70003
MA60003
All measurements are in mm unless otherwise mentioned.
M6
M6
M6
M6
M6
M6
D1
M6
M6
M6
M8
M8
M10 x 1.25
D2
50
56
110
133
163
326
L1
50
51
101
113
113
242
L2
Order no. Int. thread Arms length
0.070
0.210
0.250
0.750
0.800
3.000
Weight
[Kg]
D1
L1 L2
Int. thread
D2
Int. thread
NEWThe smallest and lightestarm in the market.
NEW
LC60003
M6
0-25(0"-1")
NF0125
NF0125 M6EXT.
holdingsystem
Clamps for top attachment
SIMPLY SOPHISTICATED22
CLAMP1”
DG0125 M6EXT.
CLAMP2”
Top attachments for dial & test indicators
FA1300 M6 PLASTICF.A. 8mm
FA1301
FA1400
FA1500
M6 PLASTICF.A. 3/8”
M62SM Metal F.A.
6mm, 8mm,3/8”
M6 Metal F.A.6mm, 8mm,
3/8”
M6
75.7
Universal Swivel Clamp
M6
75
Universal Swivel Clamp
ø4
ø63/8" ø8
Dovetail 1/4"
ø8
14
Dovetail 1/4"
M6
62
14
ø3/8”
14
Dovetail 1/4"
M6
62
14
M6
0-25mm(0"-1")
M6
0-50.8mm(0”-2”)
ACCESSORIES
SIMPLY SOPHISTICATED 23
DG0094 M2.5x10Replacement screw forDG10503, DG10533,MG10503 & MG10533.
MA0100 Knob for MA Holders
M6 Accessories
Screws
NF0049 M2.5x10Replacement screwfor NF10403 &NF10433.
DG0061 M2.5x10 Replacement screwfor FA1500.
3 Points ClampDia.Post
Dia.Arm
Knobs
MG1620 Knob for MG Holders
DG0160 Knob for NF&DG Holders
PH0313 18 For Holders: PH6800, PH681016
PH0312 16 For Holders: PH4016,PH6400, PH6410
16
M8 Accessories
MA0125 M6 W 1/4AD1080
M10 x 1.25 Accessories
AD1030
AD1000
AD8080
AD8030
MA0125
AD6080
AD6060
AD6030
AD6013
AD6010
PH0310 14
For Holders:PH2040PH6400PH6410
12
PH0315 10 For Holder PH31008
107
M6 W-1/4
W-1/4M6
382212
9
ø32
W-3/8
10 10M6
9.8
M6 M6
6.510.5
M6 M8
W-1/450
9
14
ø32
14 13 8.5
M8 W-3/8
M8
4 25
M10x1.25
185
21.54
M10x1.25 10 W-3/8
M10x1.25 8
M8
19.5