NS-289-5
NS
-289-5
Valued bearing solutions for agricultural, electrical, fluid, HVAC, lawn & garden, material handling and transmission industries
Global application engineering support
TS-16949 certified manufacturing facilities
Dedicated research and development center
Testing capabilities include: fatigue life, noise/vibration, mud slurry and salt spray testing
Flexible manufacturing to allow for low to high volume production
Customer service excellence
GRIP-IT Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3HVAC Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5AgXtreme Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Corrosion Resistant Highlights. . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
UCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11UCLP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12UCPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13HCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15HCLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17GRP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19GRLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21FHSP-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22FHP-G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23FHSLP-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24FHLP-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25FHSPWC-G/FHPWC-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26FHSPW-G/FHPW-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27UCPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28UCPAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29FHSPRZ/FHPRZ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30FHSPPZ/FHPPZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31FHSPBPFLZ/FHPBPFLZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32SPECIALS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
UCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35UCFX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37HCFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39GRF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41FHSF-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42FHF-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43FHSFJ-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44FHF4X-G/HCF4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45UCFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47FHSPFFZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53FHPFFZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
UCFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48GRFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49FHSF3X-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50FHF3X-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51FHSF3C-G/FHF3C-G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52FHSPFZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53FHPFZ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54FHSPFTZ/FHPFTZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
UCFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57UCFTX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59HCFTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61GRFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63FHSFT-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64FHFT-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65FHFTJ-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66FHSLF-G/FHLF-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67FHSFD-G/FHFD-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68FHSFLCTQ-G/FHFLCTQ-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69FHSFX-G/FHFX-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70FHSPFLZ/FHPFLZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71FHSR-4X700/FHR-4X700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72FHSR-2FM/FHSR-2NCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73RCSMRFZ-S/RCSMRFZ-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
FHSBR/FHBR/LCR/LRCR/RCR . . . . . . . . . . . . . . . . . . . . . . . . . . 75RCSM-S/RCSM-L/LRCSM-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76RCSM-UCR/RCSM-GRR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
UCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78GRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
UCHA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80GRHA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
UCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
GRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Casted Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Bearing/Seal Feature Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
UC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-87UCX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-89HC/HCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-91GR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92-93SER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94SER-ZSFF/SER-ZMKFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95GER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96GER-ZSFF/GER-ZMKFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97FHS-G/FHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98FHSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99FH-G/FH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100FHR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101FHRL/FHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Material Specs for Corrosion Resistant Units . . . . . . . . . . . . . . . 103
SSUCP Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104SSUCPAS Tapped Base Pillow Block . . . . . . . . . . . . . . . . . . . . . 105SSUCF 4-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106SSUCFB 3-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107SSUCFT 2-bolt Flange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108SSUCHA Hanger Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109SSUCT Take Up Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
SUCP-PBT Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . 110SUCPAS-PBT Tapped Base Pillow Block . . . . . . . . . . . . . . . . . . 111SUCF-PBT 4-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . 112SUCFB-PBT 3-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . 113SUCFT-PBT 2-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . 114SUCT-PBT Take Up Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 115SUCHA-PBT Hanger Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
ZUCP-PBT Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . 110ZUCPAS-PBT Tapped Base Pillow Block . . . . . . . . . . . . . . . . . . 111ZUCF-PBT 4-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . 112ZUCFB-PBT 3-Bolt Flange . . . . . . . . . . . . . . . . . . . . . . . . . . 113ZUCFT-PBT 2-Bolt Flange. . . . . . . . . . . . . . . . . . . . . . . . . . . 114ZUCT-PBT Take Up Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 115ZUCHA-PBT Hanger Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Nickel Plated Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
SUC Stainless Steel Insert . . . . . . . . . . . . . . . . . . . . . . . . . 117ZUC Zinc Plated Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . 118UC-BLK Black Oxide Plated Insert . . . . . . . . . . . . . . . . . . . . . . 119SSER Stainless Steel Insert. . . . . . . . . . . . . . . . . . . . . . . . . . 120ZSER Zinc Plated Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Chemical Resistance Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122-147
Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148-151
Contents
Pillow
Bloc
ksInt
roduc
tion
4-Bo
lt Fla
nges
3-Bo
lt Fla
nges
2-Bo
lt Fla
nges
Rubb
erCa
rtridg
eTa
ke Ups
Cylin
drica
lCa
rtridg
eBe
aring
Inse
rtsAll
Stain
less S
teel
Stainl
ess In
sert
Therm
oplas
tic Ho
using
Zinc I
nsert
Therm
oplas
tic Ho
using
Corro
sion
Resis
tant In
serts
Engin
eerin
gDa
taHa
nger
Units
P1-7 new++ 2010.1.27 1:29 AM Page 1
12 3
4
5
6
7
8
9
10
PEER’s GER Series
Replaces PEER’S popular SER series bearings. Cylindrical outerring with snap ring makes this ideal for conveyor and printingroller applications. Also available with non contact “Z” shields for high speed, free-spinning applications.
1 Through hardened steel spherical outer ring2 Machined groove with steel snap ring3 Grease relubrication groove and oil holes4 Through hardened steel wide inner ring5 Special heat treated gripping “Fingers”6 Concentric split locking collar7 Torx® style socket head cap screw8 Full contact metal shroud seals9 Metal slingers
10 Standard load capacity steel balls
GRIP-ITMEANS LONGER LASTING, QUIETER BEARING UNITS...
IMPORTANT MAINTENANCE AND REPLACEMENT SAVINGS
1 2
3
4
5
6
97
8
10
PEER’s GER Series
PEER’s GR Series
2 3
PEER’s GR Series
GRIP-IT bearings are ideal for bi-directional applications and can replace both set screw locking and eccentric collar lockingbearings. Available in a full range of sizes, the new “GR” seriesself aligning bearings can be used in all standard cast iron,malleable and pressed steel housings making it a drop-inreplacement for your current bearing unit.
1 Through hardened steel spherical outer ring2 Grease relubrication groove and oil holes3 Through hardened steel wide inner ring4 Special heat treated gripping “Fingers”5 Concentric split locking collar6 Torx® style socket head cap screw7 Full contact metal shroud seals8 Metal slingers9 Anti-Rotation pin
10 Standard load capacity steel balls
P1-7 new++ 2010.1.27 1:29 AM Page 2
utergs
How GRIP-IT ball bearings do it:
Forget the old-fashioned mechanism that pushes the shaft against one side of the bearing ring. (Figure A). PEER’S GRIP-IT mounted units are designed to produce 360 degrees of equalized locking contact.(Figure B). The shaft is centered concentrically in the bore of the bearing and always runs true. Shaft offset is eliminiated and premature locking failure is minimized.Since locking design is a major factor in mounted bearingperformance, GRIP-IT stands out as a major advantage.
n Shaft offset eliminatedn Vibration and noise significantly reducedn Rotational balance remains constantn GRIP-ITs are easily removed or repositioned. Since they
do not mar or score the shaft, they are easier and lessexpensive to service.
Available in most standard,medium and light dutyhousings.
G, QUIETER BEARING UNITS...E AND REPLACEMENT SAVINGS
True center lineUsing PEER’S GR Series Bearing.
Offset using conventional set screw locking.
Figure AOffset using set screws
Figure BTrue center line
Air Handling
360o
3
P1-7 new++ 2010.1.27 1:29 AM Page 3
Air Handling Mounted Units for use in
H V A CApplications
4
P1-7 new++ 2010.1.27 1:29 AM Page 4
• 100% noise tested on state-of-the-artAnderon Meter equipment to EMQ (electric motor quality) standards.
• Bearings and housings are individuallymatched to achieve an air handling fit, aunique set of tolerances to ensure easyalignment and prevent bearing pre-loadwhen mounting on light steel andaluminum frames.
• Solid foot housing design is standard on all pillowblocks, 2-bolts and heavyduty 4-bolt flanges to offergreater mounting stability.
• Each bearing ismanufactured withSAE52100 bearing steel withgrade 10 or better balls. Our 62 degree set screw angleis proven to provide greaterlocking power between thebearing and shaft.
• Final assembly of each airhandling unit is done at PEER’s Waukegan, IL plant and each unit is then certified and labeled for air handling use.
5
Available in standard and medium duty sizes.
Air Handling
P1-7 new++ 2010.1.27 1:29 AM Page 5
PEER developed AgXtreme bearing seals specifically for harsh and severe environments. The AST (Advanced Seal Technology) was designed for environments where a standard seal is not tough enough.
Applications Include:Agriculture - Combines, Hay balers, Mower Conditioners, Cotton Strippers, Augers, Planters/grain drillsLawn & Garden - Lawn MowersConveyors - Grain, Aggregate
Field TestingAgXtreme bearing seal designs have undergone independent fieldtesting in a wide range of agricultural applications.
Test Results“The test shows the PEER bearing seals performed significantly better than the name brand bearing seals. The lack of durability in the name brand seal design is evident, as the contamination levels of the bearing were high at the 75-hour mark. It is clear that the PEER bearing seals are superior to the name brand seals”
Chris Napoleon,Chief Engineer, Napoleon Engineering Services,Independent Bearing Testing Facility
Lab Testing / Mud Slurry TestingThe test is performed to determine the effectiveness of the bearingsealing device to withstand contamination intrusion under aggressive
environmental conditions. Seal designs are tested against competitive parts in side-by-side mud slurry testing. In this test, bearings are operated while submerged in a suspension containing Water, Arizona Coarse Test Dust (ISO 12103-1 A4 coarse test dust), Fertilizer, and Calcium Chloride.
PEER AGXTREMEAFTER 144 HOURS
NAME BRANDAFTER 144 HOURS
AgXtreme designed seal groove to prevent seals from “turning” during operation
Durable steel zerk fitting
All bearings lubricated with brand name greases proven to perform in extreme environments High grade cast iron or
ductile iron housings(Stamped steel housing also available)
Solid foot housing designfor added strength
Grade 10 precision balls
Class 3A set screwwith nylon patch
High strength riveted, steel retainers(Retainers are also available in Nylon)
Improved finish for seal contactarea to reduce seal wear
Precision ground andsuper-finished raceways
Exclusive AgXtreme seal design. Single (F or G), double or triplelip seal options all bonded to athick gauge steel shroud forprotection even in the harshestof environments
PEER offers a wide range ofAgricultural Bearing Products
PEER AGXTREMEAFTER 75 HOURS
NAME BRANDAFTER 75 HOURS
MUD SLURRY TEST FIXTURE
6 7
P1-7 new++ 2010.1.27 1:30 AM Page 6
PEER developed AgXtreme bearing seals specifically for harsh and severe environments. The AST (Advanced Seal Technology) was designed for environments where a standard seal is not tough enough.
Applications Include:Agriculture - Combines, Hay balers, Mower Conditioners, Cotton Strippers, Augers, Planters/grain drillsLawn & Garden - Lawn MowersConveyors - Grain, Aggregate
Field TestingAgXtreme bearing seal designs have undergone independent fieldtesting in a wide range of agricultural applications.
Test Results“The test shows the PEER bearing seals performed significantly better than the name brand bearing seals. The lack of durability in the name brand seal design is evident, as the contamination levels of the bearing were high at the 75-hour mark. It is clear that the PEER bearing seals are superior to the name brand seals”
Chris Napoleon,Chief Engineer, Napoleon Engineering Services,Independent Bearing Testing Facility
Lab Testing / Mud Slurry TestingThe test is performed to determine the effectiveness of the bearingsealing device to withstand contamination intrusion under aggressive
environmental conditions. Seal designs are tested against competitive parts in side-by-side mud slurry testing. In this test, bearings are operated while submerged in a suspension containing Water, Arizona Coarse Test Dust (ISO 12103-1 A4 coarse test dust), Fertilizer, and Calcium Chloride.
PEER AGXTREMEAFTER 144 HOURS
NAME BRANDAFTER 144 HOURS
AgXtreme designed seal groove to prevent seals from “turning” during operation
Durable steel zerk fitting
All bearings lubricated with brand name greases proven to perform in extreme environments High grade cast iron or
ductile iron housings(Stamped steel housing also available)
Solid foot housing designfor added strength
Grade 10 precision balls
Class 3A set screwwith nylon patch
High strength riveted, steel retainers(Retainers are also available in Nylon)
Improved finish for seal contactarea to reduce seal wear
Precision ground andsuper-finished raceways
Exclusive AgXtreme seal design. Single (F or G), double or triplelip seal options all bonded to athick gauge steel shroud forprotection even in the harshestof environments
PEER offers a wide range ofAgricultural Bearing Products
PEER AGXTREMEAFTER 75 HOURS
NAME BRANDAFTER 75 HOURS
MUD SLURRY TEST FIXTURE
7
P1-7 new++ 2010.1.27 1:30 AM Page 7
* For alternative locking devices, additional housings styles and bore sizes, please contact your PEER Bearing Co. sales representative.
Even under the harshest conditions - sulfuric, nitric or acetic acids and in contaminated or uncontaminated water conditions - PEER’s all stainless steel units provide excellent corrosion resistance.
n Stainless steel housings are designed with solid bases/backs and smoothsurfaces to allow for complete and easy wash-down.
n Stainless steel bearings are designed with extended inner rings for shaftstability and set screw locking for bi-directional applications.*
n Standard closures include a stainless steel slinger over a full contact silicon seal to form a double barrier of protection during operation and wash-down.
n Stainless steel bearings are filled with FDA/USDA (approved for incidental foodcontact) water/wash resistant, odorless, tasteless Mobilgrease FM102.
n Stainless steel units are available from stock:*Pillow blocks (P) Tapped-base pillow blocks (PAS)Two-bolt flange (FT) Three-bolt-flange (FB) Four-bolt flange (F).
n Stainless steel bearings are available in common inch and metric shaft sizes.
Stainless steel units…the clear choice for extreme
conditions with heavier loads.
Corrosion Resistant Mounted Units...
8 9
P1-7 new++ 2010.1.27 1:30 AM Page 8
PBT Thermoplastic Housings with Stainless Steel Bearings… or…PBT Thermoplastic Housings with
Stainless/Zinc Chromate Bearings…
Two great options for severe conditions PEER Thermoplastic housings will cope with severe wash-down conditionsand temperatures to 285˚ F and have a tensile strength of 17,300 PSI (ASTM D638). They are resistant to moisture absorption and have highmechanical properties. These units maintain excellent chemical resistantratings even in contact with hydrochloric, sulfuric, nitric and acetic acids. In addition, they can resist most hydroxides and alcohols.
n Housings are made from G.E. Valox® virgin PBT thermoplastic material andare designed with solid bases/backs and smooth surfaces to allow forcomplete and easy wash-down.
n Stainless steel and stainless/zinc chromate bearings are designed withextended inner rings for shaft stability and set screw locking for bi-directional applications.*
n Standard closures include a stainless steel slinger over a full contactsilicon seal to form a double barrier of protection during operation and wash-down.
n Stainless steel and stainless/zinc chromate bearings are filled withFDA/USDA (approved for incidental food contact) water/washresistant, odorless, tasteless Mobilgrease FM102.
n Thermoplastic units are available from stock:*Pillow blocks (P)Tapped base pillow blocks (PAS)Two-bolt flange (FT)Three bolt-flange (FB)Four-bolt flange (F)Hanger (HA)Take-up (T)
n Stainless steel and stainless/zincchromate bearings are available incommon inch and metric shaft sizes.
* For alternative locking devices, additional housings styles and bore sizes, please contact your PEER Bearing Co. sales representative.
s... to operate in virtually any corrosive environment
9
P1-7 new++ 2010.1.27 1:30 AM Page 9
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4107.1
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
10
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
UCSP201 -8UCSP201 -12mmUCSP202 -9UCSP202 -10UCSP202 -15mmUCSP203 -11UCSP203 -17mmUCP201 -8UCP201 -12mmUCP202 -9UCP202 -10UCP202 -15mmUCP203 -11UCP203 -17mmUCP204 -12UCP204 -13UCP204 -20mmUCP205 -13UCP205 -14UCP205 -15UCP205 -16UCP205 -25mmUCP206 -17UCP206 -18UCP206 -19UCP206 -20UCP206 -30mmUCP207 -20UCP207 -21UCP207 -22UCP207 -23UCP207 -35mmUCP208 -24UCP208 -25UCP208 -40mmUCP209 -26UCP209 -27UCP209 -28UCP209 -45mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4107.1
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
11
inmmDimensions
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
3 1/1677.8
3 17/6483.2
3 1/288.8
2 1/457.15
2 1/263.50
2 3/469.85
376.20
3 1/879.38
3 1/482.55
3 1/288.90
3 3/495.25
4101.60
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
UCP210 -29UCP210 -30UCP210 -31UCP210 -32UCP210 -50mmUCP211 -32UCP211 -33UCP211 -34UCP211 -35UCP211 -55mmUCP212 -36UCP212 -37UCP212 -38UCP212 -39UCP212 -60mmUCP213 -40UCP213 -41UCP213 -65mmUCP214 -42UCP214 -43UCP214 -44UCP214 -70mmUCP215 -45UCP215 -46UCP215 -47UCP215 -48UCP215 -75mmUCP216 -50UCP216 -80mmUCP217 -52UCP217 -55UCP217 -85mmUCP218 -56UCP218 -90mm
Unit No.
6 1/4158.8
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
9 1/8231.8
9 23/32246.9
10 5/16261.9
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
125.4
125.4
1 1/1627.0
7/822.2
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
1 3/834.9
1 9/1639.7
1 25/3245.2
3/419.1
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
1 11/3234.1
1 7/1636.5
1 39/6440.9
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.10
1.56339.70
UC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
P-210-HT
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
P-216-HT
P-217-HT
P-218-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
4 9/16115.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
6 15/16176.2
7 7/16188.9
7 31/32202.4
8 1/8206.4
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
11 1/2292.1
12 7/32310.4
12 7/8327.0
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Standard Shaft HeightUCP200 Series Set Screw Locking
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 8
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4107.1
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
10
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
UCSP201 -8UCSP201 -12mmUCSP202 -9UCSP202 -10UCSP202 -15mmUCSP203 -11UCSP203 -17mmUCP201 -8UCP201 -12mmUCP202 -9UCP202 -10UCP202 -15mmUCP203 -11UCP203 -17mmUCP204 -12UCP204 -13UCP204 -20mmUCP205 -13UCP205 -14UCP205 -15UCP205 -16UCP205 -25mmUCP206 -17UCP206 -18UCP206 -19UCP206 -20UCP206 -30mmUCP207 -20UCP207 -21UCP207 -22UCP207 -23UCP207 -35mmUCP208 -24UCP208 -25UCP208 -40mmUCP209 -26UCP209 -27UCP209 -28UCP209 -45mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4107.1
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
11
inmmDimensions
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
3 1/1677.8
3 17/6483.2
3 1/288.8
2 1/457.15
2 1/263.50
2 3/469.85
376.20
3 1/879.38
3 1/482.55
3 1/288.90
3 3/495.25
4101.60
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
UCP210 -29UCP210 -30UCP210 -31UCP210 -32UCP210 -50mmUCP211 -32UCP211 -33UCP211 -34UCP211 -35UCP211 -55mmUCP212 -36UCP212 -37UCP212 -38UCP212 -39UCP212 -60mmUCP213 -40UCP213 -41UCP213 -65mmUCP214 -42UCP214 -43UCP214 -44UCP214 -70mmUCP215 -45UCP215 -46UCP215 -47UCP215 -48UCP215 -75mmUCP216 -50UCP216 -80mmUCP217 -52UCP217 -55UCP217 -85mmUCP218 -56UCP218 -90mm
Unit No.
6 1/4158.8
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
9 1/8231.8
9 23/32246.9
10 5/16261.9
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
125.4
125.4
1 1/1627.0
7/822.2
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
1 3/834.9
1 9/1639.7
1 25/3245.2
3/419.1
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
1 11/3234.1
1 7/1636.5
1 39/6440.9
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.10
1.56339.70
UC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
P-210-HT
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
P-216-HT
P-217-HT
P-218-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
4 9/16115.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
6 15/16176.2
7 7/16188.9
7 31/32202.4
8 1/8206.4
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
11 1/2292.1
12 7/32310.4
12 7/8327.0
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Standard Shaft HeightUCP200 Series Set Screw Locking
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 8
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 1/1626.99
1 1/431.75
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/328.7
15/3211.9
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
13/1620.6
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mm
LP-203S-HA
LP-204-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 3/3253.2
2 15/3262.7
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
UCSLP201 -8UCSLP201 -12mmUCSLP202 -9UCSLP202 -10UCSLP202 -15mmUCSLP203 -11UCSLP203 -17mmUCLP201 -8UCLP201 -12mmUCLP202 -9UCLP202 -10UCLP202 -15mmUCLP203 -11UCLP203 -17mmUCLP204 -12UCLP204 -13UCLP204 -20mmUCLP205 -13UCLP205 -14UCLP205 -15UCLP205 -16UCLP205 -25mmUCLP206 -17UCLP206 -18UCLP206 -19UCLP206 -20UCLP206 -30mmUCLP207 -20UCLP207 -21UCLP207 -22UCLP207 -23UCLP207 -35mmUCP208 -24UCP208 -25UCP208 -40mmUCLP209 -26UCLP209 -27UCLP209 -28UCLP209 -45mmUCLP210 -29UCLP210 -30UCLP210 -31UCLP210 -32UCLP210 -50mmUCLP211 -32UCLP211 -33UCLP211 -34UCLP211 -35UCLP211 -55mmUCLP212 -36UCLP212 -37UCLP212 -38UCLP212 -39UCLP212 -60mm
12
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options:See page 85
Pillow Blocks – Low Shaft HeightsUCLP200 Series Set Screw Locking
Pillow Blocks – Medium DutyUCPX00 Series Set Screw Locking
n Medium duty, high-grade cast iron
n Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
13
inmmDimensions
250.8
2 1/457.2
2 1/457.2
2 5/866.7
2 5/866.7
2 7/873.0
3 1/879.4
3 9/3283.3
3 9/3283.3
3 1/288.9
3 1/288.9
4 1/32102.4
4 1/32102.4
1 3/444.45
1 7/847.63
2 1/853.98
2 5/1658.74
2 5/1658.74
2 1/263.50
2 3/469.85
376.20
376.20
3 1/288.90
3 1/288.90
4101.60
4101.60
13/167/8
15/161
25mm1 1/161 1/81 3/161 1/430mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/191 7/8
1 15/162
50mm2
2 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
Unit No.
4 11/16119.1
5127.0
5 21/32143.7
6 5/32156.4
6 5/32156.4
6 25/32172.2
7 1/4184.2
8203.2
8203.2
9 1/32229.4
9 1/32229.4
11 5/32283.4
11 5/32283.4
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
1 1/1626.9
1 1/1626.9
1 1/1626.9
1 1/1626.9
125.4
125.4
1 3/1630.2
1 1/431.8
1 5/1633.3
1 13/3235.7
1 13/3235.7
1 9/1639.7
1 9/1639.7
1 31/3250.0
1 31/3250.0
2 9/3257.9
2 3/860.3
5/815.9
21/3216.7
3/419.0
13/1620.6
13/1620.6
7/822.2
1 3/3227.8
1 3/3227.8
1 3/3227.8
1 1/431.8
1 1/431.8
1 11/3234.1
1 11/3234.1
1.50038.1
1.68942.9
1.93749.2
1.93749.2
2.03151.6
2.18955.6
2.56365.1
2.56365.1
2.93774.6
3.06377.8
3.25282.6
3.37485.73.78096.0
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.101.56339.70
UCX05 -13UCX05 -14UCX05 -15UCX05 -16UCX05 -25mmUCX06 -17UCX06 -18UCX06 -19UC207 -20 *UCX06 -30mmUCX07 -20UCX07 -21UCX07 -22UCX07 -23UCX07 -35mmUCX08 -24UCX08 -25UCX08 -40mmUCX09 -26UCX09 -27UCX09 -28UCX09 -45mmUCX10 -29UCX10 -30UCX10 -31UC211 -32 **UCX10 -50mmUCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36 ***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
P-X05-HA
P-X06-HA
P-X07-HA
P-X08-HA
P-X09-HT
P-X10-HT
P-X11-HT
P-X12-HT
P-X13-HT
P-X14-HT
P-X15-HT
P-X16-HT
P-X17-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. HousingNo.
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
7/8
7/8
3 3/885.7
3 11/1693.7
4 1/8104.8
4 1/2114.3
4 9/16115.9
4 31/32126.2
5 15/32138.9
5 31/32151.6
6 3/32154.8
6 23/32170.7
6 7/8174.6
7 11/16195.37 7/8200.0
6 1/4158.8
6 7/8174.6
8203.2
8 3/4222.3
8 3/4222.3
9 1/2241.3
10 1/4260.4
11 1/4285.8
11 1/4285.8
13330.2
13330.2
15381.0
15381.0
UCPX05 -13UCPX05 -14UCPX05 -15UCPX05 -16UCPX05 -25mmUCPX06 -17UCPX06 -18UCPX06 -19UCPX06 -20 *UCPX06 -30mmUCPX07 -20UCPX07 -21UCPX07 -22UCPX07 -23UCPX07 -35mmUCPX08 -24UCPX08 -25UCPX08 -40mmUCPX09 -26UCPX09 -27UCPX09 -28UCPX09 -45mmUCPX10 -29UCPX10 -30UCPX10 -31UCPX10 -32 **UCPX10 -50mmUCPX11 -32UCPX11 -33UCPX11 -34UCPX11 -35UCPX11 -36 ***UCPX11 -55mmUCPX12 -37UCPX12 -38UCPX12 -39UCPX12 -60mmUCPX13 -40UCPX13 -41UCPX13 -65mmUCPX14 -42UCPX14 -43UCPX14 -44UCPX14 -70mmUCPX15 -45UCPX15 -46UCPX15 -47UCPX15 -48UCPX15 -75mmUCPX16 -50UCPX16 -80mmUCPX17 -52UCPX17 -85mm
m
0.87422.2
1.00025.4
1.18930.2
1.18930.2
1.28332.6
1.31533.4
1.56339.7
1.56339.7
1.74844.4
1.75244.5
1.94149.3
2.03151.6
2.21756.3
*UCPX06-20 uses standard UC207-20 insert bearing,**UCPX10-32 uses standard UC211-32 insert bearing, ***UCPX11-36 uses standard UC212-36 insert bearing.
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Medium Duty units are available with eccentric locking collar bearings. Example HCPX08-24
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 10
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 1/1626.99
1 1/431.75
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/328.7
15/3211.9
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
13/1620.6
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
0.39410.00
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mm
LP-203S-HA
LP-204-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 3/3253.2
2 15/3262.7
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
UCSLP201 -8UCSLP201 -12mmUCSLP202 -9UCSLP202 -10UCSLP202 -15mmUCSLP203 -11UCSLP203 -17mmUCLP201 -8UCLP201 -12mmUCLP202 -9UCLP202 -10UCLP202 -15mmUCLP203 -11UCLP203 -17mmUCLP204 -12UCLP204 -13UCLP204 -20mmUCLP205 -13UCLP205 -14UCLP205 -15UCLP205 -16UCLP205 -25mmUCLP206 -17UCLP206 -18UCLP206 -19UCLP206 -20UCLP206 -30mmUCLP207 -20UCLP207 -21UCLP207 -22UCLP207 -23UCLP207 -35mmUCP208 -24UCP208 -25UCP208 -40mmUCLP209 -26UCLP209 -27UCLP209 -28UCLP209 -45mmUCLP210 -29UCLP210 -30UCLP210 -31UCLP210 -32UCLP210 -50mmUCLP211 -32UCLP211 -33UCLP211 -34UCLP211 -35UCLP211 -55mmUCLP212 -36UCLP212 -37UCLP212 -38UCLP212 -39UCLP212 -60mm
12
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options:See page 85
Pillow Blocks – Low Shaft HeightsUCLP200 Series Set Screw Locking
Pillow Blocks – Medium DutyUCPX00 Series Set Screw Locking
n Medium duty, high-grade cast iron
n Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
13
inmmDimensions
250.8
2 1/457.2
2 1/457.2
2 5/866.7
2 5/866.7
2 7/873.0
3 1/879.4
3 9/3283.3
3 9/3283.3
3 1/288.9
3 1/288.9
4 1/32102.4
4 1/32102.4
1 3/444.45
1 7/847.63
2 1/853.98
2 5/1658.74
2 5/1658.74
2 1/263.50
2 3/469.85
376.20
376.20
3 1/288.90
3 1/288.90
4101.60
4101.60
13/167/8
15/161
25mm1 1/161 1/81 3/161 1/430mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/191 7/8
1 15/162
50mm2
2 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
Unit No.
4 11/16119.1
5127.0
5 21/32143.7
6 5/32156.4
6 5/32156.4
6 25/32172.2
7 1/4184.2
8203.2
8203.2
9 1/32229.4
9 1/32229.4
11 5/32283.4
11 5/32283.4
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
1 1/1626.9
1 1/1626.9
1 1/1626.9
1 1/1626.9
125.4
125.4
1 3/1630.2
1 1/431.8
1 5/1633.3
1 13/3235.7
1 13/3235.7
1 9/1639.7
1 9/1639.7
1 31/3250.0
1 31/3250.0
2 9/3257.9
2 3/860.3
5/815.9
21/3216.7
3/419.0
13/1620.6
13/1620.6
7/822.2
1 3/3227.8
1 3/3227.8
1 3/3227.8
1 1/431.8
1 1/431.8
1 11/3234.1
1 11/3234.1
1.50038.1
1.68942.9
1.93749.2
1.93749.2
2.03151.6
2.18955.6
2.56365.1
2.56365.1
2.93774.6
3.06377.8
3.25282.6
3.37485.73.78096.0
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.101.56339.70
UCX05 -13UCX05 -14UCX05 -15UCX05 -16UCX05 -25mmUCX06 -17UCX06 -18UCX06 -19UC207 -20 *UCX06 -30mmUCX07 -20UCX07 -21UCX07 -22UCX07 -23UCX07 -35mmUCX08 -24UCX08 -25UCX08 -40mmUCX09 -26UCX09 -27UCX09 -28UCX09 -45mmUCX10 -29UCX10 -30UCX10 -31UC211 -32 **UCX10 -50mmUCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36 ***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
P-X05-HA
P-X06-HA
P-X07-HA
P-X08-HA
P-X09-HT
P-X10-HT
P-X11-HT
P-X12-HT
P-X13-HT
P-X14-HT
P-X15-HT
P-X16-HT
P-X17-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. HousingNo.
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
7/8
7/8
3 3/885.7
3 11/1693.7
4 1/8104.8
4 1/2114.3
4 9/16115.9
4 31/32126.2
5 15/32138.9
5 31/32151.6
6 3/32154.8
6 23/32170.7
6 7/8174.6
7 11/16195.37 7/8200.0
6 1/4158.8
6 7/8174.6
8203.2
8 3/4222.3
8 3/4222.3
9 1/2241.3
10 1/4260.4
11 1/4285.8
11 1/4285.8
13330.2
13330.2
15381.0
15381.0
UCPX05 -13UCPX05 -14UCPX05 -15UCPX05 -16UCPX05 -25mmUCPX06 -17UCPX06 -18UCPX06 -19UCPX06 -20 *UCPX06 -30mmUCPX07 -20UCPX07 -21UCPX07 -22UCPX07 -23UCPX07 -35mmUCPX08 -24UCPX08 -25UCPX08 -40mmUCPX09 -26UCPX09 -27UCPX09 -28UCPX09 -45mmUCPX10 -29UCPX10 -30UCPX10 -31UCPX10 -32 **UCPX10 -50mmUCPX11 -32UCPX11 -33UCPX11 -34UCPX11 -35UCPX11 -36 ***UCPX11 -55mmUCPX12 -37UCPX12 -38UCPX12 -39UCPX12 -60mmUCPX13 -40UCPX13 -41UCPX13 -65mmUCPX14 -42UCPX14 -43UCPX14 -44UCPX14 -70mmUCPX15 -45UCPX15 -46UCPX15 -47UCPX15 -48UCPX15 -75mmUCPX16 -50UCPX16 -80mmUCPX17 -52UCPX17 -85mm
m
0.87422.2
1.00025.4
1.18930.2
1.18930.2
1.28332.6
1.31533.4
1.56339.7
1.56339.7
1.74844.4
1.75244.5
1.94149.3
2.03151.6
2.21756.3
*UCPX06-20 uses standard UC207-20 insert bearing,**UCPX10-32 uses standard UC211-32 insert bearing, ***UCPX11-36 uses standard UC212-36 insert bearing.
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Medium Duty units are available with eccentric locking collar bearings. Example HCPX08-24
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 10
14
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Standard Shaft HeightHCP200 Series Eccentric Locking Collar
15
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
1.4737.30
1.7143.50
1.7143.50
1.7444.30
1.9048.30
2.0151.10
2.2256.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
HCSP201 -8HCSP201 -12mmHCSP202 -9HCSP202 -10HCSP202 -15mmHCSP203 -11HCSP203 -17mmHCP201 -8HCP201 -12mmHCP202 -9HCP202 -10HCP202 -15mmHCP203 -11HCP203 -17mmHCP204 -12HCP204 -20mmHCP205 -13HCP205 -14HCP205 -15HCP205 -16HCP205 -25mmHCP206 -17HCP206 -18HCP206 -19HCP206 -20HCP206 -30mmHCP207 -20HCP207 -21HCP207 -22HCP207 -23HCP207 -35mmHCP208 -24HCP208 -25HCP208 -40mm
m
0.5513.90
0.6717.00
0.6717.00
0.6917.40
0.7218.20
0.7418.80
0.8421.40
W
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
inmmDimensions
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
2 1/853.89
2 1/457.15
2 1/263.50
2 3/469.85
376.20
3 1/879.38
3 1/482.55
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
5 3/4146.1
6 1/4158.8
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
13/1620.6
7/822.2
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
3/419.1
3/419.1
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
2.2256.30
2.4762.70
2.8171.40
3.0677.80
3.3785.70
3.3785.70
3.6392.10
0.84321.40
0.96924.60
1.09027.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mmHC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
P-209-HA
P-210-HT
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
3/4
3/4
3/4
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
HCP209 -26HCP209 -27HCP209 -28HCP209 -45mmHCP210 -29HCP210 -30HCP210 -31HCP210 -32HCP210 -50mmHCP211 -32HCP211 -33HCP211 -34HCP211 -35HCP211 -55mmHCP212 -36HCP212 -37HCP212 -38HCP212 -39HCP212 -60mmHCP213 -40HCP213 -41HCP213 -65mmHCP214 -42HCP214 -43HCP214 -44HCP214 -70mmHCP215 -45HCP215 -46HCP215 -47HCP215 -48HCP215 -75mm
m
0.8421.40
0.9724.60
1.0927.70
1.2230.90
1.3434.10
1.3434.10
1.4737.30
W
2.5063.50
2.7569.90
3.0076.20
3.3184.10
3.3986.00
3.5490.00
4.00101.60
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 12
14
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Standard Shaft HeightHCP200 Series Eccentric Locking Collar
15
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
1 3/1630.16
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
15/3211.9
17/3213.5
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
1.4737.30
1.7143.50
1.7143.50
1.7444.30
1.9048.30
2.0151.10
2.2256.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
P-203S-HA
P-203-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2 7/3256.4
2 15/3262.7
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
HCSP201 -8HCSP201 -12mmHCSP202 -9HCSP202 -10HCSP202 -15mmHCSP203 -11HCSP203 -17mmHCP201 -8HCP201 -12mmHCP202 -9HCP202 -10HCP202 -15mmHCP203 -11HCP203 -17mmHCP204 -12HCP204 -20mmHCP205 -13HCP205 -14HCP205 -15HCP205 -16HCP205 -25mmHCP206 -17HCP206 -18HCP206 -19HCP206 -20HCP206 -30mmHCP207 -20HCP207 -21HCP207 -22HCP207 -23HCP207 -35mmHCP208 -24HCP208 -25HCP208 -40mm
m
0.5513.90
0.6717.00
0.6717.00
0.6917.40
0.7218.20
0.7418.80
0.8421.40
W
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
inmmDimensions
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
2 1/853.89
2 1/457.15
2 1/263.50
2 3/469.85
376.20
3 1/879.38
3 1/482.55
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
5 3/4146.1
6 1/4158.8
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
125.4
125.4
125.4
13/1620.6
7/822.2
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
3/419.1
3/419.1
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
2.2256.30
2.4762.70
2.8171.40
3.0677.80
3.3785.70
3.3785.70
3.6392.10
0.84321.40
0.96924.60
1.09027.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mmHC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
P-209-HA
P-210-HT
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
3/4
3/4
3/4
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
HCP209 -26HCP209 -27HCP209 -28HCP209 -45mmHCP210 -29HCP210 -30HCP210 -31HCP210 -32HCP210 -50mmHCP211 -32HCP211 -33HCP211 -34HCP211 -35HCP211 -55mmHCP212 -36HCP212 -37HCP212 -38HCP212 -39HCP212 -60mmHCP213 -40HCP213 -41HCP213 -65mmHCP214 -42HCP214 -43HCP214 -44HCP214 -70mmHCP215 -45HCP215 -46HCP215 -47HCP215 -48HCP215 -75mm
m
0.8421.40
0.9724.60
1.0927.70
1.2230.90
1.3434.10
1.3434.10
1.4737.30
W
2.5063.50
2.7569.90
3.0076.20
3.3184.10
3.3986.00
3.5490.00
4.00101.60
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Sta
ndard
Mounte
d U
nits
P8_25 new++ 2010.1.27 1:37 AM Page 12
16
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Low Shaft HeightHCLP200 Series Eccentric Locking Collar
17
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
1 1/1626.99
1 1/431.75
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
11/328.7
15/3211.9
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
1.4737.30
1.7143.50
1.7143.50
1.7444.30
1.9048.30
2.0151.10
2.2256.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
LP-203S-HA
LP-204-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2 3/3253.2
2 15/3262.7
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
HCSLP201 -8HCSLP201 -12mmHCSLP202 -9HCSLP202 -10HCSLP202 -15mmHCSLP203 -11HCSLP203 -17mmHCLP201 -8HCLP201 -12mmHCLP202 -9HCLP202 -10HCLP202 -15mmHCLP203 -11HCLP203 -17mmHCLP204 -12HCLP204 -20mmHCLP205 -13HCLP205 -14HCLP205 -15HCLP205 -16HCLP205 -25mmHCLP206 -17HCLP206 -18HCLP206 -19HCLP206 -20HCLP206 -30mmHCLP207 -20HCLP207 -21HCLP207 -22HCLP207 -23HCLP207 -35mmHCP208 -24HCP208 -25HCP208 -40mm
m
0.5513.90
0.6717.00
0.6717.00
0.6917.40
0.7218.20
0.7418.80
0.8421.40
W
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
inmmDimensions
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
21/3216.7
25/3219.8
25/3219.8
25/3219.8
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/1617.5
11/1617.5
13/1620.6
13/1620.6
2.2256.30
2.4762.70
2.8171.40
3.0677.80
0.84321.40
0.96924.60
1.09027.70
1.21730.90
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mm
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
HCLP209 -26HCLP209 -27HCLP209 -28HCLP209 -45mmHCLP210 -29HCLP210 -30HCLP210 -31HCLP210 -32HCLP210 -50mmHCLP211 -32HCLP211 -33HCLP211 -34HCLP211 -35HCLP211 -55mmHCLP212 -36HCLP212 -37HCLP212 -38HCLP212 -39HCLP212 -60mm
m
0.8421.40
0.9724.60
1.0927.70
1.2230.90
W
2.5063.50
2.7569.90
3.0076.20
3.3184.10
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 14
16
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Low Shaft HeightHCLP200 Series Eccentric Locking Collar
17
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
1 1/1626.99
1 1/431.75
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 5/892.1
3 3/495.3
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
7/1611.1
1/212.7
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
7/822.2
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
11/328.7
15/3211.9
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
1.4737.30
1.7143.50
1.7143.50
1.7444.30
1.9048.30
2.0151.10
2.2256.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
LP-203S-HA
LP-204-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2 3/3253.2
2 15/3262.7
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
5 15/32138.8
5127.0
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
HCSLP201 -8HCSLP201 -12mmHCSLP202 -9HCSLP202 -10HCSLP202 -15mmHCSLP203 -11HCSLP203 -17mmHCLP201 -8HCLP201 -12mmHCLP202 -9HCLP202 -10HCLP202 -15mmHCLP203 -11HCLP203 -17mmHCLP204 -12HCLP204 -20mmHCLP205 -13HCLP205 -14HCLP205 -15HCLP205 -16HCLP205 -25mmHCLP206 -17HCLP206 -18HCLP206 -19HCLP206 -20HCLP206 -30mmHCLP207 -20HCLP207 -21HCLP207 -22HCLP207 -23HCLP207 -35mmHCP208 -24HCP208 -25HCP208 -40mm
m
0.5513.90
0.6717.00
0.6717.00
0.6917.40
0.7218.20
0.7418.80
0.8421.40
W
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
inmmDimensions
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
21/3216.7
25/3219.8
25/3219.8
25/3219.8
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/1617.5
11/1617.5
13/1620.6
13/1620.6
2.2256.30
2.4762.70
2.8171.40
3.0677.80
0.84321.40
0.96924.60
1.09027.70
1.21730.90
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mm
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
HCLP209 -26HCLP209 -27HCLP209 -28HCLP209 -45mmHCLP210 -29HCLP210 -30HCLP210 -31HCLP210 -32HCLP210 -50mmHCLP211 -32HCLP211 -33HCLP211 -34HCLP211 -35HCLP211 -55mmHCLP212 -36HCLP212 -37HCLP212 -38HCLP212 -39HCLP212 -60mm
m
0.8421.40
0.9724.60
1.0927.70
1.2230.90
W
2.5063.50
2.7569.90
3.0076.20
3.3184.10
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 14
18
Pillow Blocks – Standard Shaft HeightGRP200 Series GRIP-IT 360 Degree Locking
19
Sta
ndard
Mounte
d U
nits
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
1 5/1633.340
1 7/1636.510
1 11/1642.860
1 7/847.630
1 15/1649.210
2 1/853.890
2 1/457.150
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
1.3734.90
1.5138.40
1.6541.90
1.8747.50
2.1153.70
2.1253.90
2.2757.60
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mm
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
1/2
1/2
5/8
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
GRP204 -12GRP204 -13GRP204 -20mmGRP205 -13GRP205 -14GRP205 -15GRP205 -16GRP205 -25mmGRP206 -17GRP206 -18GRP206 -19GRP206 -20GRP206 -30mmGRP207 -20GRP207 -21GRP207 -22GRP207 -23GRP207 -35mmGRP208 -24GRP208 -25GRP208 -40mmGRP209 -26GRP209 -27GRP209 -28GRP209 -45mmGRP210 -29GRP210 -30GRP210 -31GRP210 -32GRP210 -50mm
m
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
W
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3.3986.00
inmmDimensions
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
3 1/1677.8
2 1/263.500
2 3/469.850
376.200
3 1/879.380
3 1/482.550
3 1/288.900
22 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm
Unit No.
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
9 1/8231.8
25/3219.8
25/3219.8
125.4
125.4
125.4
125.4
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
1 3/834.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
6 15/16176.2
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
1 11/3234.1
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
GR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -45GR215 -46GR215 -47GR215 -48GR215 -75mmGR216 -50GR216 -80mm
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
P-216-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
5/8
5/8
3/4
3/4
3/4
3/4
2.4361.70
2.8572.30
2.8572.30
3.2281.80
3.3685.30
3.5590.10
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
11 1/2292.1
GRP211 -32GRP211 -33GRP211 -34GRP211 -35GRP211 -55mmGRP212 -36GRP212 -37GRP212 -38GRP212 -39GRP212 -60mmGRP213 -40GRP213 -41GRP213 -65mmGRP214 -42GRP214 -43GRP214 -44GRP214 -70mmGRP215 -45GRP215 -46GRP215 -47GRP215 -48GRP215 -75mmGRP216-50GRP216-80mm
m
1.3133.40
1.5639.70
1.5639.70
1.7544.40
1.7544.50
1.9449.30
W
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
4.87123.70
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 16
18
Pillow Blocks – Standard Shaft HeightGRP200 Series GRIP-IT 360 Degree Locking
19
Sta
ndard
Mounte
d U
nits
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
1 5/1633.340
1 7/1636.510
1 11/1642.860
1 7/847.630
1 15/1649.210
2 1/853.890
2 1/457.150
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
1.3734.90
1.5138.40
1.6541.90
1.8747.50
2.1153.70
2.1253.90
2.2757.60
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mm
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
1/2
1/2
5/8
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
GRP204 -12GRP204 -13GRP204 -20mmGRP205 -13GRP205 -14GRP205 -15GRP205 -16GRP205 -25mmGRP206 -17GRP206 -18GRP206 -19GRP206 -20GRP206 -30mmGRP207 -20GRP207 -21GRP207 -22GRP207 -23GRP207 -35mmGRP208 -24GRP208 -25GRP208 -40mmGRP209 -26GRP209 -27GRP209 -28GRP209 -45mmGRP210 -29GRP210 -30GRP210 -31GRP210 -32GRP210 -50mm
m
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
W
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3.3986.00
inmmDimensions
2 5/1658.9
2 27/6461.6
2 53/6471.9
2 27/3272.1
2 7/873.0
3 1/1677.8
2 1/263.500
2 3/469.850
376.200
3 1/879.380
3 1/482.550
3 1/288.900
22 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm
Unit No.
6 23/32170.7
7 1/4184.2
8203.2
8 9/32210.3
8 17/32216.7
9 1/8231.8
25/3219.8
25/3219.8
125.4
125.4
125.4
125.4
7/822.2
125.4
1 3/1630.2
1 3/1630.2
1 3/1630.2
1 3/834.9
4 31/32126.2
5 9/16141.3
6 3/64153.6
6 9/32159.5
6 5/8168.3
6 15/16176.2
7/822.2
7/822.2
125.4
1 7/6428.2
125.4
1 11/3234.1
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
GR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -45GR215 -46GR215 -47GR215 -48GR215 -75mmGR216 -50GR216 -80mm
P-211-HT
P-212-HT
P-213-HT
P-214-HT
P-215-HT
P-216-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
5/8
5/8
3/4
3/4
3/4
3/4
2.4361.70
2.8572.30
2.8572.30
3.2281.80
3.3685.30
3.5590.10
8 5/8219.1
9 7/16239.7
10 7/16265.1
10 15/32265.9
10 13/16274.6
11 1/2292.1
GRP211 -32GRP211 -33GRP211 -34GRP211 -35GRP211 -55mmGRP212 -36GRP212 -37GRP212 -38GRP212 -39GRP212 -60mmGRP213 -40GRP213 -41GRP213 -65mmGRP214 -42GRP214 -43GRP214 -44GRP214 -70mmGRP215 -45GRP215 -46GRP215 -47GRP215 -48GRP215 -75mmGRP216-50GRP216-80mm
m
1.3133.40
1.5639.70
1.5639.70
1.7544.40
1.7544.50
1.9449.30
W
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
4.87123.70
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 16
20
Pillow Blocks – Low Shaft HeightGRLP200 Series GRIP-IT 360 Degree Locking
21
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 11/3234.00
1 1/238.10
1 3/444.60
1 13/1645.80
1 59/6448.80
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.210
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 3/495.25
4 1/8104.78
4 3/4120.65
5127.00
5 13/32137.320
1/212.70
1/212.70
21/3216.67
21/3216.67
21/3216.670
3/419.05
3/419.05
13/1620.64
13/1620.64
13/1620.640
15/3211.91
1/212.70
17/3213.49
21/3216.67
13/1620.640
1.3734.90
1.5138.40
1.6541.90
1.8747.50
2.1153.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mm
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
1/2
2 15/3262.71
2 21/3267.47
3 5/3280.17
3 5/892.08
4101.60
5127.00
5 1/2139.70
6 1/2165.10
6 9/16166.69
7 1/4184.150
GRLP204 -12GRLP204 -13GRLP204 -20mmGRLP205 -13GRLP205 -14GRLP205 -15GRLP205 -16GRLP205 -25mmGRLP206 -17GRLP206 -18GRLP206 -19GRLP206 -20GRLP206 -30mmGRLP207 -20GRLP207 -21GRLP207 -22GRLP207 -23GRLP207 -35mmGRP208 -24GRP208 -25GRP208 -40mm
m
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
W
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
2 1/6451.20
2 3/1655.60
2 5/1658.90
2 27/6461.60
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
5 3/4146.05
6 1/4158.75
6 29/32175.35
7 13/32188.15
21/3216.67
25/3219.84
25/3219.84
25/3219.84
13/1620.64
7/822.23
1 1/1626.88
1 5/3229.38
11/1617.46
11/1617.46
13/1620.64
13/1620.64
2.1253.90
2.2757.60
2.4361.70
2.8572.30
0.74819.00
0.74819.00
0.87422.20
1.00025.40
GR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mm
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
4 3/16106.36
4 1/2114.30
4 29/32124.62
5 1/2139.70
7 15/32189.71
8 1/8206.38
8 5/8219.08
9 1/2241.30
GRLP209 -26GRLP209 -27GRLP209 -28GRLP209 -45mmGRLP210 -29GRLP210 -30GRLP210 -31GRLP210 -32GRLP210 -50mmGRLP211 -32GRLP211 -33GRLP211 -34GRLP211 -35GRLP211 -55mmGRLP212 -36GRLP212 -37GRLP212 -38GRLP212 -39GRLP212 -60mm
m
1.1930.20
1.2832.60
1.3133.40
1.5639.70
W
2.9374.50
3.3986.00
3.5089.00
4.06103.00
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 18
20
Pillow Blocks – Low Shaft HeightGRLP200 Series GRIP-IT 360 Degree Locking
21
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 11/3234.00
1 1/238.10
1 3/444.60
1 13/1645.80
1 59/6448.80
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.210
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
3 3/495.25
4 1/8104.78
4 3/4120.65
5127.00
5 13/32137.320
1/212.70
1/212.70
21/3216.67
21/3216.67
21/3216.670
3/419.05
3/419.05
13/1620.64
13/1620.64
13/1620.640
15/3211.91
1/212.70
17/3213.49
21/3216.67
13/1620.640
1.3734.90
1.5138.40
1.6541.90
1.8747.50
2.1153.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mm
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
1/2
2 15/3262.71
2 21/3267.47
3 5/3280.17
3 5/892.08
4101.60
5127.00
5 1/2139.70
6 1/2165.10
6 9/16166.69
7 1/4184.150
GRLP204 -12GRLP204 -13GRLP204 -20mmGRLP205 -13GRLP205 -14GRLP205 -15GRLP205 -16GRLP205 -25mmGRLP206 -17GRLP206 -18GRLP206 -19GRLP206 -20GRLP206 -30mmGRLP207 -20GRLP207 -21GRLP207 -22GRLP207 -23GRLP207 -35mmGRP208 -24GRP208 -25GRP208 -40mm
m
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
W
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
2 1/6451.20
2 3/1655.60
2 5/1658.90
2 27/6461.60
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
5 3/4146.05
6 1/4158.75
6 29/32175.35
7 13/32188.15
21/3216.67
25/3219.84
25/3219.84
25/3219.84
13/1620.64
7/822.23
1 1/1626.88
1 5/3229.38
11/1617.46
11/1617.46
13/1620.64
13/1620.64
2.1253.90
2.2757.60
2.4361.70
2.8572.30
0.74819.00
0.74819.00
0.87422.20
1.00025.40
GR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mm
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
1/2
5/8
5/8
5/8
4 3/16106.36
4 1/2114.30
4 29/32124.62
5 1/2139.70
7 15/32189.71
8 1/8206.38
8 5/8219.08
9 1/2241.30
GRLP209 -26GRLP209 -27GRLP209 -28GRLP209 -45mmGRLP210 -29GRLP210 -30GRLP210 -31GRLP210 -32GRLP210 -50mmGRLP211 -32GRLP211 -33GRLP211 -34GRLP211 -35GRLP211 -55mmGRLP212 -36GRLP212 -37GRLP212 -38GRLP212 -39GRLP212 -60mm
m
1.1930.20
1.2832.60
1.3133.40
1.5639.70
W
2.9374.50
3.3986.00
3.5089.00
4.06103.00
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 18
22
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seal
Optional seals: See page 85
Pillow Blocks – Standard Shaft HeightFHSP200-G Series Set Screw Locking
Pillow Blocks – Standard Shaft HeightFHP200-G Series Eccentric Locking Collar
23
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
2 1/457.15
2 1/263.50
2 3/469.85
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 23/32170.7
7 1/4184.2
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
7/822.2
125.4
15/3211.9
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
7/822.2
7/822.2
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
1.7243.70
1.7243.70
1.7243.70
1.9148.40
1.9449.30
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53113.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212-60mmG
P-203S-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
P-211-HT
P-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 7/3256.4
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 9/16141.3
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 7/16239.7
FHP201 -8GFHP201 -12mmGFHP202 -9GFHP202 -10GFHP202 -15mmGFHP203 -11GFHP203 -17mmGFHP204 -12GFHP204 -20mmGFHP205 -13GFHP205 -14GFHP205 -15GFHP205 -16GFHP205 -25mmGFHP206 -17GFHP206 -18GFHP206 -19GFHP206 -20GFHP206 -30mmGFHP207 -20GFHP207 -21GFHP207 -22GFHP207 -23GFHP207 -35mmGFHP208 -24GFHP208 -25GFHP208 -40mmGFHP209 -26GFHP209 -27GFHP209 -28GFHP209 -45mmGFHP210 -29GFHP210 -30GFHP210 -31GFHP210 -32GFHP210 -50mmGFHP211 -32GFHP211 -33GFHP211 -34GFHP211 -35GFHP211 -55mmGFHP212 -36GFHP212 -37GFHP212 -38GFHP212 -39GFHP212 -60mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
0.7619.18
0.7619.18
0.7619.18
0.7920.00
0.7920.00
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
2 1/457.15
2 1/263.50
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 23/32170.7
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
7/822.2
15/3211.9
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
7/822.2
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
1.5038.00
1.5639.50
1.7243.60
1.8145.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -27GFHS209 -28GFHS209 -45mmGFSH210 -29GFSH210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFSH211 -33GFSH211 -34GFHS211 -35GFHS211 -55mmG
P-203S-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
P-211-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
2 7/3256.4
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
FHSP201 -8GFHSP201 -12mmGFHSP202 -9GFHSP202 -10GFHSP202 -15mmGFHSP203 -11GFHSP203 -17mmGFHSP204 -12GFHSP204 -13GFHSP204 -20mmGFHSP205 -12GFHSP205 -13GFHSP205 -14GFHSP205 -15GFHSP205 -16GFHSP205 -25mmGFHSP206 -17GFHSP206 -18GFHSP206 -19GFHSP206 -20GFHSP206 -30mmGFHSP207 -20GFHSP207 -21GFHSP207 -22GFHSP207 -23GFHSP207 -35mmGFHSP208 -24GFHSP208 -25GFHSP208 -40mmGFHSP209 -27GFHSP209 -28GFHSP209 -45mmGFHSP210 -29GFSHP210 -30GFHSP210 -31GFHSP210 -32GFHSP210 -50mmGFHSP211 -32GFSHP211 -33GFSHP211 -34GFHSP211 -35GFHSP211 -55mmG
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 20
22
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seal
Optional seals: See page 85
Pillow Blocks – Standard Shaft HeightFHSP200-G Series Set Screw Locking
Pillow Blocks – Standard Shaft HeightFHP200-G Series Eccentric Locking Collar
23
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
2 1/457.15
2 1/263.50
2 3/469.85
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 23/32170.7
7 1/4184.2
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
7/822.2
125.4
15/3211.9
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
7/822.2
7/822.2
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
1.7243.70
1.7243.70
1.7243.70
1.9148.40
1.9449.30
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53113.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212-60mmG
P-203S-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
P-211-HT
P-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 7/3256.4
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 9/16141.3
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 7/16239.7
FHP201 -8GFHP201 -12mmGFHP202 -9GFHP202 -10GFHP202 -15mmGFHP203 -11GFHP203 -17mmGFHP204 -12GFHP204 -20mmGFHP205 -13GFHP205 -14GFHP205 -15GFHP205 -16GFHP205 -25mmGFHP206 -17GFHP206 -18GFHP206 -19GFHP206 -20GFHP206 -30mmGFHP207 -20GFHP207 -21GFHP207 -22GFHP207 -23GFHP207 -35mmGFHP208 -24GFHP208 -25GFHP208 -40mmGFHP209 -26GFHP209 -27GFHP209 -28GFHP209 -45mmGFHP210 -29GFHP210 -30GFHP210 -31GFHP210 -32GFHP210 -50mmGFHP211 -32GFHP211 -33GFHP211 -34GFHP211 -35GFHP211 -55mmGFHP212 -36GFHP212 -37GFHP212 -38GFHP212 -39GFHP212 -60mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
0.7619.18
0.7619.18
0.7619.18
0.7920.00
0.7920.00
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1 15/1649.21
2 1/853.89
2 1/457.15
2 1/263.50
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 23/32170.7
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
7/822.2
15/3211.9
17/3213.5
5/815.9
21/3216.7
23/3218.3
13/1620.6
3/419.1
3/419.1
7/822.2
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
1.5038.00
1.5639.50
1.7243.60
1.8145.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -27GFHS209 -28GFHS209 -45mmGFSH210 -29GFSH210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFSH211 -33GFSH211 -34GFHS211 -35GFHS211 -55mmG
P-203S-HA
P-204-HA
P-205-HA
P-206-HA
P-207-HA
P-208-HA
P-209-HA
P-210-HT
P-211-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
2 7/3256.4
2 17/3264.3
2 25/3270.6
3 9/3283.3
3 11/1693.7
4101.6
4 1/4108.0
4 9/16115.9
4 31/32126.2
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
FHSP201 -8GFHSP201 -12mmGFHSP202 -9GFHSP202 -10GFHSP202 -15mmGFHSP203 -11GFHSP203 -17mmGFHSP204 -12GFHSP204 -13GFHSP204 -20mmGFHSP205 -12GFHSP205 -13GFHSP205 -14GFHSP205 -15GFHSP205 -16GFHSP205 -25mmGFHSP206 -17GFHSP206 -18GFHSP206 -19GFHSP206 -20GFHSP206 -30mmGFHSP207 -20GFHSP207 -21GFHSP207 -22GFHSP207 -23GFHSP207 -35mmGFHSP208 -24GFHSP208 -25GFHSP208 -40mmGFHSP209 -27GFHSP209 -28GFHSP209 -45mmGFHSP210 -29GFSHP210 -30GFHSP210 -31GFHSP210 -32GFHSP210 -50mmGFHSP211 -32GFSHP211 -33GFSHP211 -34GFHSP211 -35GFHSP211 -55mmG
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 20
24
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Pillow Blocks – Low Shaft HeightFHSLP200-G Series Set Screw Locking
Pillow Blocks – Low Shaft HeightFHLP200-G Series Eccentric Locking Collar
25
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 1/1626.99
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/328.7
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
13/1620.6
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
1.7243.70
1.7243.70
1.7243.70
1.9148.40
1.9449.30
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53213.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212-60mmG
LP-203S-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 3/3253.2
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
FHLP201 -8GFHLP201 -12mmGFHLP202 -9GFHLP202 -10GFHLP202 -15mmGFHLP203 -11GFHLP203 -17mmGFHLP204 -12GFHLP204 -20mmGFHLP205 -13GFHLP205 -14GFHLP205 -15GFHLP205 -16GFHLP205 -25mmGFHLP206 -17GFHLP206 -18GFHLP206 -19GFHLP206 -20GFHLP206 -30mmGFHLP207 -20GFHLP207 -21GFHLP207 -22GFHLP207 -23GFHLP207 -35mmGFHP208 -24GFHP208 -25GFHP208 -40mmGFHLP209 -26GFHLP209 -27GFHLP209 -28GFHLP209 -45mmGFHLP210 -29GFHLP210 -30GFHLP210 -31GFHLP210 -32GFHLP210 -50mmGFHLP211 -32GFHLP211 -33GFHLP211 -34GFHLP211 -35GFHLP211 -55mmGFHLP212 -36GFHLP212 -37GFHLP212 -38GFHLP212 -39GFHLP212-60mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
0.7619.18
0.7619.18
0.7619.18
0.7920.00
0.7920.00
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
1 1/1626.99
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
11/328.7
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
1.5038.00
1.5639.50
1.7243.60
1.8145.90
0.2566.50
0.2957.50
0.302957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -26GFHS209 -27GFHS209 -28GFHS209 -45mmGFHS210 -29GFHS210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFHS211 -33GFHS211 -34GFHS211 -35GFHS211 -55mmG
LP-203S-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
2 3/3253.2
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
FHSLP201 -8GFHSLP201 -12mmGFHSLP202 -9GFHSLP202 -10GFHSLP202 -15mmGFHSLP203 -11GFHSLP203 -17mmGFHSLP204 -12GFHSLP204 -13GFHSLP204 -20mmGFHSLP205 -12GFHSLP205 -13GFHSLP205 -14GFHSLP205 -15GFHSLP205 -16GFHSLP205 -25mmGFHSLP206 -17GFHSLP206 -18GFHSLP206 -19GFHSLP206 -20GFHSLP206 -30mmGFHSLP207 -20GFHSLP207 -21GFHSLP207 -22GFHSLP207 -23GFHSLP207 -35mmGFHSP208 -24GFHSP208 -25GFHSP208 -40mmGFHSLP209 -26GFHSLP209 -27GFHSLP209 -28GFHSLP209 -45mmGFHSLP210 -29GFHSLP210 -30GFHSLP210 -31GFHSLP210 -32GFHSLP210 -50mmGFHSLP211 -32GFHSLP211 -33GFHSLP211 -34GFHSLP211 -35GFHSLP211 -55mmG
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 22
24
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Pillow Blocks – Low Shaft HeightFHSLP200-G Series Set Screw Locking
Pillow Blocks – Low Shaft HeightFHLP200-G Series Eccentric Locking Collar
25
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
2 27/6461.6
1 1/1626.99
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
2 11/1668.26
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7 13/32188.2
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
1 5/3229.4
11/328.7
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
13/1620.6
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
1.7243.70
1.7243.70
1.7243.70
1.9148.40
1.9449.30
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53213.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212-60mmG
LP-203S-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
LP-212-HT
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 3/3253.2
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 1/2139.7
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
9 1/2241.3
FHLP201 -8GFHLP201 -12mmGFHLP202 -9GFHLP202 -10GFHLP202 -15mmGFHLP203 -11GFHLP203 -17mmGFHLP204 -12GFHLP204 -20mmGFHLP205 -13GFHLP205 -14GFHLP205 -15GFHLP205 -16GFHLP205 -25mmGFHLP206 -17GFHLP206 -18GFHLP206 -19GFHLP206 -20GFHLP206 -30mmGFHLP207 -20GFHLP207 -21GFHLP207 -22GFHLP207 -23GFHLP207 -35mmGFHP208 -24GFHP208 -25GFHP208 -40mmGFHLP209 -26GFHLP209 -27GFHLP209 -28GFHLP209 -45mmGFHLP210 -29GFHLP210 -30GFHLP210 -31GFHLP210 -32GFHLP210 -50mmGFHLP211 -32GFHLP211 -33GFHLP211 -34GFHLP211 -35GFHLP211 -55mmGFHLP212 -36GFHLP212 -37GFHLP212 -38GFHLP212 -39GFHLP212-60mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
0.7619.18
0.7619.18
0.7619.18
0.7920.00
0.7920.00
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
n Standard duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 17/6432.2
1 11/3234.0
1 1/238.1
1 3/444.6
1 13/1645.8
1 59/6448.8
2 1/6451.2
2 3/1655.6
2 5/1658.9
1 1/1626.99
1 1/431.75
1 5/1633.34
1 9/1639.69
1 13/1646.04
1 15/1649.21
2 1/1652.39
2 3/1655.56
2 7/1661.91
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
3 5/892.1
3 3/495.3
4 1/8104.8
4 3/4120.7
5127.0
5 13/32137.3
5 3/4146.1
6 1/4158.8
6 29/32175.4
7/1611.1
1/212.7
1/212.7
21/3216.7
21/3216.7
21/3216.7
21/3216.7
25/3219.8
25/3219.8
7/822.2
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
7/822.2
1 1/1626.9
11/328.7
15/3211.9
1/212.7
17/3213.5
21/3216.7
13/1620.6
11/1617.5
11/1617.5
13/1620.6
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
1.5038.00
1.5639.50
1.7243.60
1.8145.90
0.2566.50
0.2957.50
0.302957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -26GFHS209 -27GFHS209 -28GFHS209 -45mmGFHS210 -29GFHS210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFHS211 -33GFHS211 -34GFHS211 -35GFHS211 -55mmG
LP-203S-HA
LP-204-HA
LP-205-HA
LP-206-HA
LP-207-HA
P-208-HA
LP-209-HA
LP-210-HT
LP-211-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
2 3/3253.2
2 15/3262.7
2 21/3267.5
3 5/3280.2
3 5/892.1
4101.6
4 3/16106.4
4 1/2114.3
4 29/32124.6
5 15/32138.8
5127.0
5 1/2139.7
6 1/2165.1
6 9/16166.7
7 1/4184.2
7 15/32189.7
8 1/8206.4
8 5/8219.1
FHSLP201 -8GFHSLP201 -12mmGFHSLP202 -9GFHSLP202 -10GFHSLP202 -15mmGFHSLP203 -11GFHSLP203 -17mmGFHSLP204 -12GFHSLP204 -13GFHSLP204 -20mmGFHSLP205 -12GFHSLP205 -13GFHSLP205 -14GFHSLP205 -15GFHSLP205 -16GFHSLP205 -25mmGFHSLP206 -17GFHSLP206 -18GFHSLP206 -19GFHSLP206 -20GFHSLP206 -30mmGFHSLP207 -20GFHSLP207 -21GFHSLP207 -22GFHSLP207 -23GFHSLP207 -35mmGFHSP208 -24GFHSP208 -25GFHSP208 -40mmGFHSLP209 -26GFHSLP209 -27GFHSLP209 -28GFHSLP209 -45mmGFHSLP210 -29GFHSLP210 -30GFHSLP210 -31GFHSLP210 -32GFHSLP210 -50mmGFHSLP211 -32GFHSLP211 -33GFHSLP211 -34GFHSLP211 -35GFHSLP211 -55mmG
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
P8_25 new++ 2010.1.27 1:37 AM Page 22
26
Pillow Blocks – Cast Iron, Light DutyFHSPWC200-G / FHPWC200-G Series
Pillow Blocks – Ductile, Light DutyFHSPW200-G / FHPW200-G Series
n Light duty, high strength ductile ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
27
Sta
ndard
Mounte
d U
nits
n Light duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 1/1626.9
1 5/3229.4
1 3/1630.2
1 3/834.9
1 15/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
3/413/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
3 13/1696.8
3 15/16100.0
4 23/32119.9
5127.0
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
13/1620.6
13/1620.6
1/212.7
1/212.7
19/3215.1
5/815.9
0.9825.00
1.0627.00
1.1830.00
1.2632.00
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
PWC-204-HA
PWC-205-HA
PWC-206-HA
PWC-207-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
1/2
1/2
2 9/1665.1
2 25/3270.6
3 1/482.6
3 21/3292.9
4 29/32124.6
5 1/8130.2
6 1/8155.6
6 1/2165.1
FHSPWC204 -12GFHSPWC204 -13GFHSPWC204 -20mmGFHSPWC205 -12GFHSPWC205 -13GFHSPWC205 -14GFHSPWC205 -15GFHSPWC205 -16GFHSPWC205 -25mmGFHSPWC206 -17GFHSPWC206 -18GFHSPWC206 -19GFHSPWC206 -20GFHSPWC206 -30mmGFHSPWC207 -20GFHSPWC207 -21GFHSPWC207 -22GFHSPWC207 -23GFHSPWC207 -35mmG
FHSPWC200-G Set Screw Locking
inmmDimensions
1 1/1626.9
1 5/3229.4
1 3/1630.2
1 3/834.9
1 15/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
3/420mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
3 13/1696.8
3 15/16100.0
4 23/32119.9
5127.0
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
13/1620.6
13/1620.6
1/212.7
1/212.7
19/3215.1
5/815.9
1.2231.00
1.2231.00
1.4135.70
1.5338.90
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
PWC-204-HA
PWC-205-HA
PWC-206-HA
PWC-207-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
2 9/1665.1
2 25/3270.6
3 1/482.6
3 21/3292.9
4 29/32124.6
5 1/8130.2
6 1/18155.6
6 1/2165.1
FHPWC204 -12GFHPWC204 -20mmGFHPWC205 -13GFHPWC205 -14GFHPWC205 -15GFHPWC205 -16GFHPWC205 -25mmGFHPWC206 -17GFHPWC206 -18GFHPWC206 -19GFHPWC206 -20GFHPWC206 -30mmGFHPWC207 -20GFHPWC207 -21GFHPWC207 -22GFHPWC207 -23GFHPWC207 -35mmG
m
0.5513.91
0.5514.00
0.5814.82
0.6315.90
W
0.37769.59
0.37409.50
0.467711.88
0.531513.50
i
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FHPWC200-G Eccentric Locking Collar
inmmDimensions
Unit No. ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.Unit No. ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
125.4
1 1/1626.9
1 1/828.6
1 5/1633.3
1 3/834.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
3 7/1687.3
3 13/1696.8
3 15/16100.0
4 23/32119.8
5127.0
7/1611.1
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
5/815.9
13/1620.6
13/1620.6
11/328.7
3/89.5
13/3210.3
7/1611.1
7/1611.1
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
3/8
3/8
3/8
1/2
1/2
2 5/3254.8
2 7/1661.9
2 11/1668.3
3 5/3280.2
3 9/1690.5
4 7/16112.7
4 3/4120.7
5127.0
5 15/16150.8
6 1/4158.8
FHSPW201 -8GFHSPW201 -12mmGFHSPW202 -9GFHSPW202 -10GFHSPW202 -15mmGFHSPW203 -11GFHSPW203 -17mmGFHSPW204 -12GFHSPW204 -13GFHSPW204 -20mmGFHSPW205 -12GFHSPW205 -13GFHSPW205 -14GFHSPW205 -15GFHSPW205 -16GFHSPW205 -25mmGFHSPW206 -17GFHSPW206 -18GFHSPW206 -19GFHSPW206 -20GFHSPW206 -30mmGFHSPW207 -20GFHSPW207 -21GFHSPW207 -22GFHSPW207 -23GFHSPW207 -35mmG
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
PW-203-HA
PW-204-HA
PW-205-HA
PW-206-HA
PW-207-HA
FHSPW200-G Set Screw LockingRST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
125.4
1 1/1626.9
1 1/828.6
1 5/1633.3
1 3/834.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
Unit No.
3 7/1687.3
3 13/1696.8
3 15/16100.0
4 23/32119.8
5127.0
7/1611.1
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
5/815.9
13/1620.6
13/1620.6
11/328.7
3/89.5
13/3210.3
7/1611.1
7/1611.1
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
PW-203-HA
PW-204-HA
PW-205-HA
PW-206-HA
PW-207-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
2 5/3254.8
2 7/1661.9
2 11/1668.3
3 5/3280.2
3 9/1690.5
4 7/16112.7
4 3/4120.7
5127.0
5 15/16150.8
6 1/4158.8
FHPW201 -8GFHPW201 -12mmGFHPW202 -9GFHPW202 -10GFHPW202 -15mmGFHPW203 -11GFHPW203 -17mmGFHPW204 -12GFHPW204 -20mmGFHPW205 -13GFHPW205 -14GFHPW205 -15GFHPW205 -16GFHPW205 -25mmGFHPW206 -17GFHPW206 -18GFHPW206 -19GFHPW206 -20GFHPW206 -30mmGFHPW207 -20GFHPW207 -21GFHPW207 -22GFHPW207 -23GFHPW207 -35mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
W
0.37609.55
0.37769.59
0.37409.50
0.467711.88
0.531513.50
i
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FHPW200-G Eccentric Locking Collar
P8_25 new++ 2010.1.27 1:37 AM Page 24
26
Pillow Blocks – Cast Iron, Light DutyFHSPWC200-G / FHPWC200-G Series
Pillow Blocks – Ductile, Light DutyFHSPW200-G / FHPW200-G Series
n Light duty, high strength ductile ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
27
Sta
ndard
Mounte
d U
nits
n Light duty, high-grade cast ironn Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit "G" from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
inmmDimensions
1 1/1626.9
1 5/3229.4
1 3/1630.2
1 3/834.9
1 15/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
3/413/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
3 13/1696.8
3 15/16100.0
4 23/32119.9
5127.0
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
13/1620.6
13/1620.6
1/212.7
1/212.7
19/3215.1
5/815.9
0.9825.00
1.0627.00
1.1830.00
1.2632.00
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
PWC-204-HA
PWC-205-HA
PWC-206-HA
PWC-207-HA
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
1/2
1/2
2 9/1665.1
2 25/3270.6
3 1/482.6
3 21/3292.9
4 29/32124.6
5 1/8130.2
6 1/8155.6
6 1/2165.1
FHSPWC204 -12GFHSPWC204 -13GFHSPWC204 -20mmGFHSPWC205 -12GFHSPWC205 -13GFHSPWC205 -14GFHSPWC205 -15GFHSPWC205 -16GFHSPWC205 -25mmGFHSPWC206 -17GFHSPWC206 -18GFHSPWC206 -19GFHSPWC206 -20GFHSPWC206 -30mmGFHSPWC207 -20GFHSPWC207 -21GFHSPWC207 -22GFHSPWC207 -23GFHSPWC207 -35mmG
FHSPWC200-G Set Screw Locking
inmmDimensions
1 1/1626.9
1 5/3229.4
1 3/1630.2
1 3/834.9
1 15/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
3/420mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
3 13/1696.8
3 15/16100.0
4 23/32119.9
5127.0
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
13/1620.6
13/1620.6
1/212.7
1/212.7
19/3215.1
5/815.9
1.2231.00
1.2231.00
1.4135.70
1.5338.90
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
PWC-204-HA
PWC-205-HA
PWC-206-HA
PWC-207-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
1/2
1/2
2 9/1665.1
2 25/3270.6
3 1/482.6
3 21/3292.9
4 29/32124.6
5 1/8130.2
6 1/18155.6
6 1/2165.1
FHPWC204 -12GFHPWC204 -20mmGFHPWC205 -13GFHPWC205 -14GFHPWC205 -15GFHPWC205 -16GFHPWC205 -25mmGFHPWC206 -17GFHPWC206 -18GFHPWC206 -19GFHPWC206 -20GFHPWC206 -30mmGFHPWC207 -20GFHPWC207 -21GFHPWC207 -22GFHPWC207 -23GFHPWC207 -35mmG
m
0.5513.91
0.5514.00
0.5814.82
0.6315.90
W
0.37769.59
0.37409.50
0.467711.88
0.531513.50
i
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FHPWC200-G Eccentric Locking Collar
inmmDimensions
Unit No. ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.Unit No. ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
125.4
1 1/1626.9
1 1/828.6
1 5/1633.3
1 3/834.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
3 7/1687.3
3 13/1696.8
3 15/16100.0
4 23/32119.8
5127.0
7/1611.1
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
5/815.9
13/1620.6
13/1620.6
11/328.7
3/89.5
13/3210.3
7/1611.1
7/1611.1
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
3/8
3/8
3/8
1/2
1/2
2 5/3254.8
2 7/1661.9
2 11/1668.3
3 5/3280.2
3 9/1690.5
4 7/16112.7
4 3/4120.7
5127.0
5 15/16150.8
6 1/4158.8
FHSPW201 -8GFHSPW201 -12mmGFHSPW202 -9GFHSPW202 -10GFHSPW202 -15mmGFHSPW203 -11GFHSPW203 -17mmGFHSPW204 -12GFHSPW204 -13GFHSPW204 -20mmGFHSPW205 -12GFHSPW205 -13GFHSPW205 -14GFHSPW205 -15GFHSPW205 -16GFHSPW205 -25mmGFHSPW206 -17GFHSPW206 -18GFHSPW206 -19GFHSPW206 -20GFHSPW206 -30mmGFHSPW207 -20GFHSPW207 -21GFHSPW207 -22GFHSPW207 -23GFHSPW207 -35mmG
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
PW-203-HA
PW-204-HA
PW-205-HA
PW-206-HA
PW-207-HA
FHSPW200-G Set Screw LockingRST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
125.4
1 1/1626.9
1 1/828.6
1 5/1633.3
1 3/834.9
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
Unit No.
3 7/1687.3
3 13/1696.8
3 15/16100.0
4 23/32119.8
5127.0
7/1611.1
7/1611.1
7/1611.1
9/1614.3
9/1614.3
5/815.9
5/815.9
5/815.9
13/1620.6
13/1620.6
11/328.7
3/89.5
13/3210.3
7/1611.1
7/1611.1
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
PW-203-HA
PW-204-HA
PW-205-HA
PW-206-HA
PW-207-HA
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
1/2
1/2
2 5/3254.8
2 7/1661.9
2 11/1668.3
3 5/3280.2
3 9/1690.5
4 7/16112.7
4 3/4120.7
5127.0
5 15/16150.8
6 1/4158.8
FHPW201 -8GFHPW201 -12mmGFHPW202 -9GFHPW202 -10GFHPW202 -15mmGFHPW203 -11GFHPW203 -17mmGFHPW204 -12GFHPW204 -20mmGFHPW205 -13GFHPW205 -14GFHPW205 -15GFHPW205 -16GFHPW205 -25mmGFHPW206 -17GFHPW206 -18GFHPW206 -19GFHPW206 -20GFHPW206 -30mmGFHPW207 -20GFHPW207 -21GFHPW207 -22GFHPW207 -23GFHPW207 -35mmG
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
W
0.37609.55
0.37769.59
0.37409.50
0.467711.88
0.531513.50
i
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FHPW200-G Eccentric Locking Collar
P8_25 new++ 2010.1.27 1:37 AM Page 24
28
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Pillow Blocks – Tapped Base UCPA200 Series Set Screw Locking
inmmDimensions
1 9/1639.7
1 9/1639.7
1 25/3245.2
1 31/3250.0
2 5/3254.8
2 9/3257.9
2 3/860.3
2 17/3264.3
1 3/1630.2
1 3/1630.2
1 7/1636.5
1 11/1642.8
1 7/847.6
1 15/1649.2
2 9/6454.4
2 1/457.2
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
2 3/6451.9
2 3/6451.9
2 13/6455.9
2 19/3265.9
3 5/3280.2
3 5/1684.1
3 35/6490.1
3 45/6494.1
3/8-16
3/8-16
3/8-16
7/16-14
1/2-13
1/2-13
1/2-13
5/8-11
2 7/1661.9
2 7/1661.9
2 27/3272.2
3 5/1684.1
3 3/495.3
3 15/16100.0
4 1/4107.9
4 9/16115.9
7/1611.1
7/1611.1
15/3211.9
15/3211.9
1/212.7
1/212.7
1/212.7
9/1614.3
1.2231.00
1.2231.00
1.3434.00
1.5038.10
1.6942.90
1.9449.20
1.9449.20
2.0351.60
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mm
PA-204-HT
PA-204-HT
PA-205-HT
PA-206-HT
PA-207-HT
PA-208-HT
PA-209-HT
PA-210-HT
ShaftDiam. h a e b S UNC w g D Bi n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
1/212.7
1/212.7
1/212.7
5/815.9
3/419.1
3/419.1
3/419.1
7/822.2
376.2
376.2
3 5/1684.1
3 11/1693.7
4 11/32110.3
4 9/16115.9
4 23/32119.8
5 1/8130.2
UCPA201 -8UCPA201 -12mmUCPA202 -9UCPA202 -10UCPA202 -15mmUCPA203 -11UCPA203 -17mmUCPA204 -12UCPA204 -13UCPA204 -20mmUCPA205 -13UCPA205 -14UCPA205 -15UCPA205 -16UCPA205 -25mmUCPA206 -17UCPA206 -18UCPA206 -19UCPA206 -20UCPA206 -30mmUCPA207 -20UCPA207 -21UCPA207 -22UCPA207 -23UCPA207 -35mmUCPA208 -24UCPA208 -25UCPA208 -40mmUCPA209 -26UCPA209 -27UCPA209 -28UCPA209 -45mmUCPA210 -29UCPA210 -30UCPA210 -31UCPA210 -32UCPA210 -50mm
m
0.72018.30
0.72018.30
0.77619.70
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1. Coarse threads are standard. Special threading is available upon request.2. PA series can also be combined with the following inserts: HC, FH, FHS and GR series bearings
R-Seal TRL-Seal
Z-Shield Z-Shield
Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Pillow Blocks – Tapped BaseUCPAS200 Series Set Screw Locking
n Similar to our PA series, but follows USA/Domestic dimensions
n Standard duty, high-grade cast ironn Solid foot housing designn Wide inner ring bearingn Relubricatable unit with
anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
29
Sta
ndard
Mounte
d U
nits
inmmDimensions
1 1/238.1
1 1/238.1
1 1/238.1
1 1/238.1
1 7/847.6
1 7/847.6
250.8
250.8
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
2 1/854.0
2 1/457.1
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
250.8
250.8
250.8
376.2
3 1/482.5
3 1/288.9
3 3/495.3
4101.6
3/8-16
3/8-16
3/8-16
7/16-14
1/2-13
1/2-13
1/2-13
5/8-11
7/1611.1
7/1611.1
15/3211.9
15/3211.9
1/212.7
1/212.7
1/212.7
9/1614.3
2 9/1665.1
2 9/1665.1
2 13/1671.4
3 3/885.7
3 3/495.3
3 15/16100.0
4 1/4107.9
4 5/8117.5
1.2231.00
1.2231.00
1.3434.00
1.5038.10
1.6942.90
1.9449.20
1.9449.20
2.0351.60
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mm
PAS-204-HT
PAS-204-HT
PAS-205-HT
PAS-206-HT
PAS-207-HT
PAS-208-HT
PAS-209-HT
PAS-210-HT
ShaftDiam. h a e b S UNC g w D Bi n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
1/212.7
1/212.7
1/212.7
5/815.9
3/419.1
3/419.1
3/419.1
7/822.2
3 1/879.4
3 1/879.4
376.2
4101.6
4 1/4107.9
4 5/8117.5
5127.0
5 1/2139.7
UCPAS201 -8UCPAS201 -12mmUCPAS202 -9UCPAS202 -10UCPAS202 -15mmUCPAS203 -11UCPAS203 -17mmUCPAS204 -12UCPAS204 -13UCPAS204 -20mmUCPAS205 -13UCPAS205 -14UCPAS205 -15UCPAS205 -16UCPAS205 -25mmUCPAS206 -17UCPAS206 -18UCPAS206 -19UCPAS206 -20UCPAS206 -30mmUCPAS207 -20UCPAS207 -21UCPAS207 -22UCPAS207 -23UCPAS207 -35mmUCPAS208 -24UCPAS208 -25UCPAS208 -40mmUCPAS209 -26UCPAS209 -27UCPAS209 -28UCPAS209 -45mmUCPAS210 -29UCPAS210 -30UCPAS210 -31UCPAS210 -32UCPAS210 -50mm
m
0.72018.30
0.72018.30
0.77619.70
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1. Coarse threads are standard. Special threading is available upon request.2. PAS series can also be combined with the following inserts: HC, FH, FHS and GR series bearings
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Rin
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
2 1/1652.39
2 7/3256.36
2 5/866.68
3 1/879.38
.1483.76
.1273.23
.2386.05
.2386.05
0.8922.50
0.9825.00
1.0627.00
1.1830.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
5/16
3/8
3/8
3/8
125.40
125.40
1 1/431.75
1 1/431.75
125.40
1 1/828.58
1 5/1633.34
1 9/1639.69
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm
Unit No.
376.2
3 3/885.73
3 3/495.25
4 1/4107.95
13/3210.32
7/1611.11
13/3210.32
17/3213.49
1/212.70
7/1611.11
9/1614.29
3/419.05
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mm
PP-4Z-SETS-IL
PP-5Z-SETS-IL
PP-6Z-SETS-IL
PP-7Z-SETS-IL
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
BearingNo.
4 1/8104.76
4 19/64109.14
4 7/8123.83
5 3/4146.05
FHSPRZ201 -8-ILFHSPRZ201 -12m-ILFHSPRZ202 -9-ILFHSPRZ202 -10-ILFHSPRZ202 -15m-ILFHSPRZ203 -11-ILFHSPRZ203 -17m-ILFHSPRZ204 -12-ILFHSPRZ204 -13-ILFHSPRZ204 -20m-ILFHSPRZ205 -12-ILFHSPRZ205 -13-ILFHSPRZ205 -14-ILFHSPRZ205 -15-ILFHSPRZ205 -16-ILFHSPRZ205 -25m-ILFHSPRZ206 -17-ILFHSPRZ206 -18-ILFHSPRZ206 -19-ILFHSPRZ206 -20-ILFHSPRZ206 -30m-IL
Unit No. ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
HousingNo.
RubberRing No.
RUBBER-4
RUBBER-5
RUBBER-6
RUBBER-7
inmmDimensions
FHSPRZ200 Set Screw Locking
30
n Light duty, self-aligning pressed steel housings
n Conductive rubber bearing liner reducesnoise/vibration and static electricity
n Two piece housing units are availablewith inter-locking feature (IL suffix shown)or non-locking (NL suffix)
n Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Pillow Blocks– Rubber Cushioned Pressed SteelFHSPRZ200 / FHPRZ200 Series
inmmDimensions
125.40
125.40
1 1/431.75
1 1/431.75
125.40
1 1/828.58
1 5/1633.34
1 9/1639.69
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm
Unit No.
376.2
3 3/885.73
3 3/495.25
4 1/4107.95
13/3210.32
7/1611.11
13/3210.32
17/3213.49
1/212.70
7/1611.11
9/1614.29
3/419.05
.1483.76
.1273.23
.2386.05
.2386.05
1.1328.60
1.2231.00
1.2231.00
1.4135.70
0.2566.50
0.2957.50
0.2957.50
0.3549.00
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mm
PP-4Z-SETS-IL
PP-5Z-SETS-IL
PP-6Z-SETS-IL
PP-7Z-SETS-IL
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
BearingNo.
HousingNo.
5/16
3/8
3/8
3/8
2 1/1652.39
2 7/3256.36
2 5/866.68
3 1/879.38
4 1/8104.76
4 19/64109.14
4 7/8123.83
5 3/4146.05
FHPRZ201 -8-ILFHPRZ201 -12mm-ILFHPRZ202 -9-ILFHPRZ202 -10-ILFHPRZ202 -15mm-ILFHPRZ203 -11-ILFHPRZ203 -17mm-ILFHPRZ204 -12-ILFHPRZ204 -20mm-ILFHPRZ205 -13-ILFHPRZ205 -14-ILFHPRZ205 -15-ILFHPRZ205 -16-ILFHPRZ205 -25mm-ILFHPRZ206 -17-ILFHPRZ206 -18-ILFHPRZ206 -19-ILFHPRZ206 -20-ILFHPRZ206 -30mm-IL
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
i
0.37609.55
0.37769.59
0.37409.50
0.467711.88
1.1328.60
1.2632.00
1.5038.10
1.7544.50
W RubberRing No.
RUBBER-4
RUBBER-5
RUBBER-6
RUBBER-7
FHPRZ200 Eccentric Locking Collar
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Standard housing could be made in AISI 304 Stainless Steel. Combine with Stainless Steel bearing for maximum corrosion resistance. Example: SSFHSPR206-20-IL
Pillow Blocks – Pressed SteelFHSPPZ200 / FHPPZ200 Series
n Light duty, self-aligning pressed steel housings
n Two piece housing units are available with inter-locking feature (IL suffix shown)or non-locking (NL suffix)
n Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
31
Sta
ndard
Mounte
d U
nits
inmmDimensions
125.50
125.40
125.40
1 1/431.75
1 1/431.75
7/822.50
125.40
1 1/828.58
1 5/1633.34
1 9/1639.69
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
2 5/867.00
376.2
3 3/885.73
3 3/495.25
4 1/4107.95
11/328.80
13/3210.32
7/1611.11
13/3210.32
17/3213.49
1/212.70
1/212.70
7/1611.11
9/1614.29
3/419.05
.1483.60
.1483.76
.1273.23
.2386.05
.2386.05
0.8922.50
0.9825.00
1.0627.00
1.1830.00
1.2632.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mmFHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mm
PP-3Z-SETS-IL
PP-4Z-SETS-IL
PP-5Z-SETS-IL
PP-6Z-SETS-IL
PP-7Z-SETS-IL
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
BearingNo. Housing No.
5/16
5/16
3/8
3/8
3/8
1 13/1646.5
2 1/1652.39
2 7/3256.36
2 5/866.68
3 1/879.38
3 5/892.08
4 1/8104.76
4 19/64109.14
4 7/8123.83
5 3/4146.05
FHSPPZ201 -8-ILFHSPPZ201 -12m-ILFHSPPZ202 -9-ILFHSPPZ202 -10-ILFHSPPZ202 -15m-ILFHSPPZ203 -11-ILFHSPPZ203 -17m-ILFHSPPZ204 -12-ILFHSPPZ204 -13-ILFHSPPZ204 -20m-ILFHSPPZ205 -12-ILFHSPPZ205 -13-ILFHSPPZ205 -14-ILFHSPPZ205 -15-ILFHSPPZ205 -16-ILFHSPPZ205 -25m-ILFHSPPZ206 -17-ILFHSPPZ206 -18-ILFHSPPZ206 -19-ILFHSPPZ206 -20-ILFHSPPZ206 -30m-ILFHSPPZ207 -20-ILFHSPPZ207 -21-ILFHSPPZ207 -22-ILFHSPPZ207 -23-ILFHSPPZ207 -35m-IL
Stamped housings could be made in AISI 304 stainless steel. Combine with stainless steel bearing for maximum corrosion resistance. Example: SSFHSPP206-20-IL
RST-Seal
DBL-Seal
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
FHSPPZ200 Set Screw Locking
FHPPZ200 Eccentric Locking CollarinmmDimensions
125.50
125.40
125.40
1 1/431.75
1 1/431.75
7/822.50
125.40
1 1/828.58
1 5/1633.34
1 9/1639.69
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
2 5/867.00
376.20
3 3/885.73
3 3/495.25
4 1/4107.95
11/328.80
13/3210.32
7/1611.11
13/3210.32
17/3213.49
1/212.70
1/212.70
7/1611.11
9/1614.29
3/419.05
.1483.60
.1483.76
.1273.23
.2386.05
.2386.05
1.1328.60
1.2231.00
1.2231.00
1.4135.70
1.5338.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mmFH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mm
PP-3Z-SETS-IL
PP-4Z-SETS-IL
PP-5Z-SETS-IL
PP-6Z-SETS-IL
PP-7Z-SETS-IL
ShaftDiam. h a e b s1 s2 g w L n
BoltSizeIn.
Bearing No. Housing No.
5/16
5/16
3/8
3/8
3/8
1 13/1646.5
2 1/1652.39
2 7/3256.36
2 5/866.68
3 1/879.38
3 5/892.08
4 1/8104.76
4 19/64109.14
4 7/8123.83
5 3/4146.05
FHPPZ201 -8-ILFHPPZ201 -12mm-ILFHPPZ202 -9-ILFHPPZ202 -10-ILFHPPZ202 -15mm-ILFHPPZ203 -11-ILFHPPZ203 -17mm-ILFHPPZ204 -12-ILFHPPZ204 -20mm-ILFHPPZ205 -13-ILFHPPZ205 -14-ILFHPPZ205 -15-ILFHPPZ205 -16-ILFHPPZ205 -25mm-ILFHPPZ206 -17-ILFHPPZ206 -18-ILFHPPZ206 -19-ILFHPPZ206 -20-ILFHPPZ206 -30mm-ILFHPPZ207 -20-ILFHPPZ207 -21-ILFHPPZ207 -22-ILFHPPZ207 -23-ILFHPPZ207 -35mm-IL
m
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.6315.90
i
0.37609.55
0.37769.59
0.37409.50
0.467711.88
0.531513.50
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
32
n Light duty, self-aligning pressed steel housings
n Unit assembled with one piece 2-bolt flange housing (PFL) bolted to the side of a one piece stand up housing (PB)
n Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Pillow Blocks – Pressed Steel StandFHSPBPFLZ200 / FHPBPFLZ200 Series
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
FHSPBPFLZ200 Set Screw Locking
inmmDimensions
3 5/892.08
3 13/1696.84
3 3/495.25
4 11/16119.06
5127.00
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
Unit No.
2 1/263.50
2 13/1671.44
376.20
3 9/1690.49
3 15/16100.01
1 9/3232.54
1 5/1633.33
1 11/3234.13
1 17/3238.89
1 13/1646.04
ShaftDiam. h a e e1 b s1 s2 g g1 w
FHPBPFLZ201 -8FHPBPFLZ201 -12mmFHPBPFLZ202 -9FHPBPFLZ202 -10FHPBPFLZ202 -15mmFHPBPFLZ203 -11FHPBPFLZ203 -17mmFHPBPFLZ204 -12FHPBPFLZ204 -20mmFHPBPFLZ205 -13FHPBPFLZ205 -14FHPBPFLZ205 -15FHPBPFLZ205 -16FHPBPFLZ205 -25mmFHPBPFLZ206 -17FHPBPFLZ206 -18FHPBPFLZ206 -19FHPBPFLZ206 -20FHPBPFLZ206 -30mmFHPBPFLZ207 -20FHPBPFLZ207 -21FHPBPFLZ207 -22FHPBPFLZ207 -23FHPBPFLZ207 -35mm
f c j s
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
4 7/8123.83
5127.00
5 1/4133.35
6 1/4158.75
6 1/2165.10
13/3210.32
13/3210.32
7/1611.11
9/1614.29
9/1614.29
.1042.64
.1193.02
.1343.40
.1343.40
.1493.78
2 11/3259.53
2 11/1668.26
2 27/3272.23
3 11/3284.93
3 23/3294.46
.0751.91
.0832.11
.0832.11
.1042.64
.1042.64
1 15/1649.21
2 3/1655.56
2 3/860.33
2 13/1671.44
3 3/1680.96
9/1614.29
5/815.89
11/1617.46
11/1617.46
7/822.23
13/3210.32
13/3210.32
7/1611.11
9/1614.29
9/1614.29
125.40
125.40
125.40
1 3/164.76
1 3/834.93
5/815.89
5/815.89
13/1620.64
7/822.23
7/822.23
9/327.14
11/328.73
11/328.73
13/3210.32
13/3210.32
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mmFH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mm
BearingNo.
PB-3Z
PB-4Z
PB-5Z
PB-6Z
PB-7Z
FlangeNo.
PFL-3Z
PFL-4Z
PFL-5Z
PFL-6Z
PFL-7Z
FHPBPFLZ200 Eccentric Locking Collar
inmmDimensions
3 5/892.08
3 13/1696.84
3 3/495.25
4 11/16119.06
5127.00
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
Unit No.
2 1/263.50
2 13/1671.44
376.20
3 9/1690.49
3 15/16100.01
1 9/3232.54
1 5/1633.33
1 11/3234.13
1 17/3238.89
1 13/1646.04
ShaftDiam. h a e e1 b s1 s2 g g1 w
FHSPBPFLZ201 -8FHSPBPFLZ201 -12mmFHSPBPFLZ202 -9FHSPBPFLZ202 -10FHSPBPFLZ202 -15mmFHSPBPFLZ203 -11FHSPBPFLZ203 -17mmFHSPBPFLZ204 -12FHSPBPFLZ204 -13FHSPBPFLZ204 -20mmFHSPBPFLZ205 -12FHSPBPFLZ205 -13FHSPBPFLZ205 -14FHSPBPFLZ205 -15FHSPBPFLZ205 -16FHSPBPFLZ205 -25mmFHSPBPFLZ206 -17FHSPBPFLZ206 -18FHPSBPFLZ206 -19FHPSBPFLZ206 -20FHPSBPFLZ206 -30mmFHSPBPFLZ207 -20FHSPBPFLZ207 -21FHSPBPFLZ207 -22FHSPBPFLZ207 -23FHSPBPFLZ207 -35mm
f c p j s
1 3/1630.16
1 5/1633.34
1 7/1636.51
1 11/1642.86
1 7/847.63
4 7/8123.83
5127.00
5 1/4133.35
6 1/4158.75
6 1/2165.10
13/3210.32
13/3210.32
7/1611.11
9/1614.29
9/1614.29
.1042.64
.1193.02
.1343.40
.1343.40
.1493.78
2 11/3259.53
2 11/1668.26
2 27/3272.23
3 11/3284.93
3 23/3294.46
.0751.91
.0832.11
.0832.11
.1042.64
.1042.64
1 15/1649.21
2 3/1655.56
2 3/860.33
2 13/1671.44
3 3/1680.96
9/1614.29
5/815.89
11/1617.46
11/1617.46
7/822.23
13/3210.32
13/3210.32
7/1611.11
9/1614.29
9/1614.29
125.40
125.40
125.40
1 3/164.76
1 3/834.93
5/815.89
5/815.89
13/1620.64
7/822.23
7/822.23
9/327.14
11/328.73
11/328.73
13/3210.32
13/3210.32
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mmFHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mm
BearingNo.
StandHousing
No.
PB-3Z
PB-4Z
PB-5Z
PB-6Z
PB-7Z
FlangeNo.
PFL-3Z
PFL-4Z
PFL-5Z
PFL-6Z
PFL-7Z
StandHousing
No.p
PILLOW BLOCK “SPECIALS”
33
Sta
ndard
Mounte
d U
nits
PEER offers many options and modifications on pillow blocks. In addition,PEER offers custom pillow blocks made to exact customer specifications.Below are just a few examples. Contact your sales representative for further information.
Pedestal Pillow BlocksCast iron UCPH series for applicationsrequiring very high center heights
Special designed Pressed Steel Pillow Blockswith Grip-it style bearings (GRPPZ)specially designed for air handling applications
Specially designed pillow blocksfor any application
Pillow Blocks, ModifiedExample of a solid base cast iron pillow block madeto customer specification. Unlike standard slotted bolthole, this unit has round bolt holes.
Private labeling available See page 84 for Flange & Casted specials
inmmDimensions
3/89.5
7/1611.1
1/212.7
9/1614.3
19/3215.1
19/3215.1
376.2
3 3/885.7
3 3/495.3
4 1/4108.0
4 19/32116.7
5 1/8130.2
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
.59215.00
.59215.00
.63116.00
.72018.30
.75019.10
.83421.20
125.4
125.4
1 1/1626.9
1 5/6427.3
1 3/1630.1
1 13/3235.7
27/6411.0
27/6411.0
15/3212.0
15/3212.0
17/3213.5
37/6415.0
1.3133.3
1.3133.3
1.4135.7
1.5940.5
1.7544.5
2.0251.4
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.7218.30
0.7218.30
0.7819.70
0.8722.20
1.0025.40
1.1930.20
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mm
F-203-H
F-204-H
F-205-H
F-206-H
F-207-H
F-208-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
7/16
1/2
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
2 1/854.0
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
UCF201 -8UCF201 -12mmUCF202 -9UCF202 -10UCF202 -15mmUCF203 -11UCF203 -17mmUCF204 -12UCF204 -13UCF204 -20mmUCF205 -13UCF205 -14UCF205 -15UCF205 -16UCF205 -25mmUCF206 -17UCF206 -18UCF206 -19UCF206 -20UCF206 -30mmUCF207 -20UCF207 -21UCF207 -22UCF207 -23UCF207 -35mmUCF208 -24UCF208 -25UCF208 -40mm
34
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Flange Units – Standard 4 BoltUCF200 Series Set Screw Locking
35
Sta
ndard
Mounte
d U
nits
inmmDimensions
5/815.9
5/815.9
23/3218.3
23/3218.3
7/822.2
7/822.2
7/822.2
7/822.2
15/1623.8
125.4
5 3/8136.5
5 5/8142.9
6 3/8161.9
6 7/8174.6
7 3/8187.3
7 19/32192.9
7 7/8200.0
8 3/16207.9
8 21/32219.9
9 1/4234.9
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
Unit No.
.87422.20
.87322.20
.99825.30
1.15629.40
1.18730.10
1.22131.0
1.34234.10
1.34034.00
1.40635.70
1.56539.80
1 1/238.1
1 9/1639.7
1 11/1642.9
1 7/847.6
1 31/3250.0
2 1/853.9
2 7/3256.4
2 9/3257.9
2 15/3262.7
2 11/1668.3
37/6415.0
37/6415.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
55/6422.0
55/6422.0
55/6422.0
2.0652.4
2.1654.8
2.3158.7
2.7269.1
2.7569.8
2.9775.4
3.0978.6
3.2883.3
3.4487.3
3.7896.1
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.10
1.56339.70
1.1930.20
1.2832.60
1.3133.40
1.5639.70
1.5639.70
1.7544.40
1.7544.50
1.9449.30
2.0351.60
2.2256.30
UC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
F-209-H
F-210-H
F-211-H
F-212-H
F-213-H
F-214-H
F-215-H
F-216-H
F-217-H
F-218-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
4 1/8105.0
4 3/8111.1
5 1/8130.2
5 5/8142.9
5 7/8149.0
6152.4
6 1/4158.8
6 1/2165.1
6 57/64175.0
7 23/64186.9
UCF209 -26UCF209 -27UCF209 -28UCF209 -45mmUCF210 -29UCF210 -30UCF210 -31UCF210 -32UCF210 -50mmUCF211 -32UCF211 -33UCF211 -34UCF211 -35UCF211 -55mmUCF212 -36UCF212 -37UCF212 -38UCF212 -39UCF212 -60mmUCF213 -40UCF213 -41UCF213 -65mmUCF214 -42UCF214 -43UCF214 -44UCF214 -70mmUCF215 -45UCF215 -46UCF215 -47UCF215 -48UCF215 -75mmUCF216 -50UCF216 -80mmUCF217 -52UCF217 -55UCF217 -85mmUCF218 -56UCF218 -90mm
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
9/1614.3
19/3215.1
19/3215.1
5/815.9
5/815.9
23/3218.3
.72018.30
.75019.1
.83421.2
.87422.2
.87322.2
.99825.3
1 5/6427.3
1 3/1630.1
1 13/3235.7
1 1/238.1
1 9/1639.7
1 11/1642.9
15/3212.0
17/3213.5
37/6415.0
37/6415.0
37/6415.0
45/6418.0
1.5940.5
1.7544.5
2.0251.4
2.0652.4
2.1654.8
2.3158.7
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
3/8
7/16
1/2
1/2
1/2
5/8
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
4 1/4108.0
4 19/32116.7
5 1/8130.2
5 3/8136.5
5 5/8142.9
6 3/8161.9
3 1/482.6
3 5/892.1
4101.6
4 1/8105.0
4 3/8111.1
5 1/8130.2
13/167/8
15/161
25mm1 1/161 1/81 3/161 1/430mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/191 7/8
1 15/162
50mm
Unit No.
UCX05 -13UCX05 -14UCX05 -15UCX05 -16UCX05 -25mmUCX06 -17UCX06 -18UCX06 -19UC207 -20 *UCX06 -30mmUCX07 -20UCX07 -21UCX07 -22UCX07 -23UCX07 -35mmUCX08 -24UCX08 -25UCX08 -40mmUCX09 -26UCX09 -27UCX09 -28UCX09 -45mmUCX10 -29UCX10 -30UCX10 -31UC211 -32 **UCX10 -50mm
F-206-H
F-207-H
F-208-H
F-209-H
F-210-H
F-211-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
UCFX05 -13UCFX05 -14UCFX05 -15UCFX05 -16UCFX05 -25mmUCFX06 -17UCFX06 -18UCFX06 -19UCF207 -20 *UCFX06 -30mmUCFX07 -20UCFX07 -21UCFX07 -22UCFX07 -23UCFX07 -35mmUCFX08 -24UCFX08 -25UCFX08 -40mmUCFX09 -26UCFX09 -27UCFX09 -28UCFX09 -45mmUCFX10 -29UCFX10 -30UCFX10 -31UCF211 -32 **UCFX10 -50mm
36
n Medium duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Flange Units – Medium Duty 4 BoltUCFX00 Series Set Screw Locking
37
Sta
ndard
Mounte
d U
nits
inmmDimensions
23/3218.3
7/822.2
7/822.2
7/822.2
7/822.2
15/1623.8
125.4
6 7/8174.6
7 3/8187.3
7 19/32192.9
7 7/8200.0
8 3/16207.9
8 21/32219.99 1/4234.9
22 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
Unit No.
1.15629.40
1.18730.10
1.22131.00
1.34234.10
1.34034.00
1.40635.701.56539.80
1 7/847.6
1 31/3250.0
2 1/853.9
2 7/3256.4
2 9/3257.9
2 15/3262.7
2 11/1668.3
45/6418.0
45/6418.0
45/6418.0
45/6418.0
55/6422.0
55/6422.0
55/6422.0
2.7269.1
2.7569.8
2.9775.4
3.0978.6
3.2883.3
3.4487.33.7896.1
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.101.56339.70
1.5639.70
1.5639.70
1.7544.40
1.7544.50
1.9449.30
2.0351.602.2256.30
UCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36 ***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
F-212-H
F-213-H
F-214-H
F-215-H
F-216-H
F-217-H
F-218-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
5/8
5/8
5/8
5/8
3/4
3/4
3/4
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.703.78096.00
5 5/8142.9
5 7/8149.0
6152.4
6 1/4158.8
6 1/2165.1
6 57/64175.0
7 23/64186.9
UCFX11 -32UCFX11 -33UCFX11 -34UCFX11 -35UCF212 -36 ***UCFX11 -55mmUCFX12 -37UCFX12 -38UCFX12 -39UCFX12 -60mmUCFX13 -40UCFX13 -41UCFX13 -65mmUCFX14 -42UCFX14 -43UCFX14 -44UCFX14 -70mmUCFX15 -45UCFX15 -46UCFX15 -47UCFX15 -48UCFX15 -75mmUCFX16 -50UCFX16 -80mmUCFX17 -52UCFX17 -85mm
* UCFX06-20 uses standard UC207-20 bearing and therefore is listed as UCF207-20** UCFX10-32 uses standard UC211-32 bearing and therefore is listed as UCF211-32*** UCFX11-36 uses standard UC212-36 bearing and therefore is listed as UCF212-36
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
1/212.7
3/89.5
3/89.5
7/1611.1
5/815.9
1/212.7
21/3216.7
376.2
3 3/885.7
3 3/885.7
3 3/495.3
4 1/4108.0
4 5/8117.5
5 1/8130.2
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
.65716.70
.75019.10
.75019.10
.82620.90
.82620.90
.90623.00
1.00025.40
1 3/3227.8
1 1/828.8
1 1/828.8
1 7/3231.2
1 11/3234.3
1 1/238.1
1 17/3238.9
25/6410.0
15/3212.0
15/3212.0
15/3212.0
17/3213.5
17/3213.5
37/6415.0
1.5840.1
1.8045.6
1.8045.6
1.8847.8
2.0151.0
2.1855.3
2.3760.3
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
1.468537.300
1.712643.500
1.712643.500
1.744144.300
1.901648.300
2.011851.100
2.216556.300
2 1/854.0
2 1/263.5
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
Unit No.
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
FS-203S-H
FS-204-H
FS-204-H
FS-205-H
FS-206-H
FS-207-H
FS-208-H
ShaftDiam. a e i g l s Z L n W
BoltSizeIn.
Bearing No. Housing No.
5/16
3/8
3/8
3/8
7/16
7/16
1/2
HCSFS201 -8HCSFS201 -12mmHCSFS202 -9HCSFS202 -10HCSFS202 -15mmHCSFS203 -11HCSFS203 -17mmHCFS201 -8HCFS201 -12mmHCFS202 -9HCFS202 -10HCFS202 -15mmHCFS203 -11HCFS203 -17mmHCFS204 -12HCFS204 -20mmHCFS205 -13HCFS205 -14HCFS205 -15HCFS205 -16HCFS205 -25mmHCFS206 -17HCFS206 -18HCFS206 -19HCFS206 -20HCFS206 -30mmHCFS207 -20HCFS207 -21HCFS207 -22HCFS207 -23HCFS207 -35mmHCFS208 -24HCFS208 -25HCFS208 -40mm
38
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Flange Units – Standard 4 BoltHCFS200 Series Eccentric Locking Collar
Sta
ndard
Mounte
d U
nits
39
inmmDimensions
23/3218.3
5/815.9
11/1617.5
11/1617.5
7/822.2
7/822.2
7/822.2
1.00025.40
1.14229.00
1.26032.00
1.34334.10
1.50038.10
1.50038.10
1.60940.80
5 3/8136.5
5 5/8142.9
6 3/8161.9
6 7/8174.6
7 3/8187.3
7 19/32192.9
7 7/8200.0
11 9/1639.7
1 13/1646.0
1 31/3250.0
2 5/3254.8
2 5/1658.7
2 7/1661.9
2 9/1665.1
21/3217.0
21/3217.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
2.3760.3
2.6467.1
2.9875.7
3.1981.0
3.5389.7
3.5389.7
3.7695.6
0.84321.40
0.96924.60
1.09127.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
2.5063.50
2.7569.90
3.0076.20
3.3184.10
3.3986.00
3.5490.00
4.00101.60
2.216556.300
2.468562.700
2.811071.400
3.063077.800
3.374085.700
3.374085.700
3.626092.100
4 1/8105.0
4 3/8111.1
5 1/8130.2
5 5/8142.9
5 7/8149.0
6152.4
6 1/4158.8
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mm
HC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
FS-209-H
FS-210-H
FS-211-H
FS-212-H
FS-213-H
FS-214-H
FS-215-H
ShaftDiam. a e i g l s Z L n W
BoltSizeIn.
Bearing No. Housing No.
9/16
9/16
5/8
5/8
5/8
5/8
5/8
HCFS209 -26HCFS209 -27HCFS209 -28HCFS209 -45mmHCFS210 -29HCFS210 -30HCFS210 -31HCFS210 -32HCFS210 -50mmHCFS211 -32HCFS211 -33HCFS211 -34HCFS211 -35HCFS211 -55mmHCFS212 -36HCFS212 -37HCFS212 -38HCFS212 -39HCFS212 -60mmHCFS213 -40HCFS213 -41HCFS213 -65mmHCFS214 -42HCFS214 -43HCFS214 -44HCFS214 -70mmHCFS215 -45HCFS215 -46HCFS215 -47HCFS215 -48HCFS215 -75mm
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
7/1611.1
1/212.7
9/1614.3
19/3215.1
19/3215.1
5/815.9
3 3/885.7
3 3/495.3
4 1/4108.0
4 19/32116.7
5 1/8130.2
5 3/8136.5
.59215.00
.63116.00
.72018.30
.75019.10
.83421.20
.87422.20
125.4
1 1/1626.9
1 5/6427.3
1 3/1630.1
1 13/3235.7
1 1/238.1
27/6411.0
15/3212.0
15/3212.0
17/3213.5
37/6415.0
37/6415.0
1.4637.2
1.5840.1
1.7444.3
1.9349.1
2.2055.9
2.2557.1
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3/8
3/8
3/8
7/16
1/2
1/2
1.374034.900
1.511838.400
1.649641.900
1.870147.500
2.114253.700
2.122053.900
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
4 1/8105.0
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
Unit No.
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mm
F-204-H
F-205-H
F-206-H
F-207-H
F-208-H
F-209-H
ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
GRF204 -12GRF204 -13GRF204 -20mmGRF205 -13GRF205 -14GRF205 -15GRF205 -16GRF205 -25mmGRF206 -17GRF206 -18GRF206 -19GRF206 -20GRF206 -30mmGRF207 -20GRF207 -21GRF207 -22GRF207 -23GRF207 -35mmGRF208 -24GRF208 -25GRF208 -40mmGRF209 -26GRF209 -27GRF209 -28GRF209 -45mm
40
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Flange Units – Standard 4 BoltGRF200 Series GRIP-IT 360 Degree Locking
a e i g l s Z L n W
41
Sta
ndard
Mounte
d U
nits
inmmDimensions
5/815.9
23/3218.3
23/3218.3
7/822.2
7/822.2
7/822.2
5 5/8142.9
6 3/8161.9
6 7/8174.6
7 3/8187.3
7 19/32192.9
7 7/8200.0
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
.87322.20
.99825.30
1.15629.40
1.18730.10
1.22131.00
1.34234.10
1 9/1639.7
1 11/1642.9
1 7/847.6
1 31/3250.0
2 1/853.9
2 7/3256.4
37/6415.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
45/6418.0
2.3960.8
2.5564.8
3.0076.3
3.0377.0
3.2582.6
3.3986.1
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
3.3986.00
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
1/2
5/8
5/8
5/8
5/8
5/8
2.267757.600
2.429161.700
2.846572.300
2.846572.300
3.220581.800
3.358385.300
4 3/8111.1
5 1/8130.2
5 5/8142.9
5 7/8149.0
6152.4
6 1/4158.8
Unit No.
GR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -45GR215 -46GR215 -47GR215 -48GR215 -75mm
F-210-H
F-211-H
F-212-H
F-213-H
F-214-H
F-215-H
ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
GRF210 -29GRF210 -30GRF210 -31GRF210 -32GRF210 -50mmGRF211 -32GRF211 -33GRF211 -34GRF211 -35GRF211 -55mmGRF212 -36GRF212 -37GRF212 -38GRF212 -39GRF212 -60mmGRF213 -40GRF213 -41GRF213 -65mmGRF214 -42GRF214 -43GRF214 -44GRF214 -70mmGRF215 -45GRF215 -46GRF215 -47GRF215 -48GRF215 -75mm
a e i g l s Z L n W
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
7/1611.1
7/1611.1
1/212.7
9/1614.3
19/3215.1
19/3215.1
5/815.9
5/815.9
23/3218.3
376.2
3 3/885.7
3 3/495.3
4 1/4108.0
4 19/32116.7
5 1/8130.2
5 3/8136.5
5 5/8142.9
6 3/8161.9
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
.3759.50
.59215.00
.63116.00
.72018.30
.75019.10
.83421.20
.87422.20
.87322.20
.99825.30
45/6417.9
125.4
1 1/1626.9
1 5/6427.3
1 3/1630.1
1 13/3235.7
1 1/238.1
1 9/1639.7
1 11/1642.9
27/6411.0
27/6411.0
15/3212.0
15/3212.0
17/3213.5
37/6415.0
37/6415.0
37/6415.0
45/6418.0
1.0025.5
1.2832.5
1.4035.5
1.5539.3
1.6441.6
1.9048.2
2.0050.700
2.1654.800
3.2682.800
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.6316.00
0.6917.50
0.7719.50
0.8321.00
0.8922.50
1.0627.00
1.1228.50
1.2832.60
1.3133.40
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209-26GFHS209 -27GFHS209 -28GFHS209-45mmFHS210-29GFHS210-30GFHS210-31GFHS210-32GFHS210-50mmFHS211-32GFHS211-33GFHS211-34GFHS211-35GFHS211-55mm
FJ-203-H
F-204-H
F-205-H
F-206-H
F-207-H
F-208-H
F-209-H
F-210-H
F-211-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
1.55539.50
1.71743.60
1.8145.90
2 1/854.0
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
4 1/8105.0
4 3/8111.1
5 1/8130.2
FHSFJ201 -8GFHSFJ201 -12mmGFHSFJ202 -9GFHSFJ202 -10GFHSFJ202 -15mmGFHSFJ203 -11GFHSFJ203 -17mmGFHSF204 -12GFHSF204 -13GFHSF204 -20mmGFHSF205 -12GFHSF205 -13GFHSF205 -14GFHSF205 -15GFHSF205 -16GFHSF205 -25mmGFHSF206 -17GFHSF206 -18GFHSF206 -19GFHSF206 -20GFHSF206 -30mmGFHSF207 -20GFHSF207 -21GFHSF207 -22GFHSF207 -23GFHSF207 -35mmGFHSF208 -24GFHSF208 -25GFHSF208 -40mmGFHSF209 -26GFHSF209 -27GFHSF209 -28GFHSF209 -45mmGFHSF210 -29GFHSF210 -30GFHSF210 -31GFHSF210 -32GFHSF210 -50mmGFHSF211 -32GFHSF211 -33GFHSF211 -34GFHSF211 -35GFHSF211 -55mmG
42
n Standard duty, high-grade cast ironn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Standard 4 BoltFHSF200-G Series Set Screw Locking
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
inmmDimensions
7/1611.1
7/1611.1
1/212.7
9/1614.3
19/3215.1
19/3215.1
5/815.9
5/815.9
23/3218.3
23/3218.3
376.2
3 3/885.7
3 3/495.3
4 1/4108.0
4 19/32116.7
5 1/8130.2
5 3/8136.5
5 5/8142.9
6 3/8161.9
6 7/8174.6
.3759.50
.59215.00
.63116.00
.72018.30
.75019.10
.83421.20
.87422.20
.87422.20
.99825.30
1.15629.40
45/6417.9
125.4
1 1/1626.9
1 5/6427.3
1 3/1630.1
1 13/3235.7
1 1/238.1
1 9/1639.7
1 11/1642.9
1 7/847.6
27/6411.0
27/6411.0
15/3212.0
15/3212.0
17/3213.5
37/6415.0
37/6415.0
37/6415.0
45/6418.0
45/6418.0
1.2431.6
1.5238.5
1.5639.5
1.7745.0
1.9148.5
2.1253.9
2.1654.9
2.1654.9
2.4161.2
2.5765.2
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53113.50
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212 -60mmG
3/8
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
5/8
1.126028.600
1.220531.000
1.220531.000
1.405535.700
1.531538.900
1.720543.700
1.720543.700
1.720543.700
1.905548.400
1.940949.300
2 1/854.0
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
4 1/8105.0
4 3/8111.1
5 1/8130.2
5 5/8142.9
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
FJ-203-H
F-204-H
F-205-H
F-206-H
F-207-H
F-208-H
F-209-H
F-210-H
F-211-H
F-212-H
ShaftDiam. a e i g l s Z L n W
BoltSizeIn.
Bearing No. Housing No.
FHFJ201 -8GFHFJ201 -12mmGFHFJ202 -9GFHFJ202 -10GFHFJ202 -15mmGFHFJ203 -11GFHFJ203 -17mmGFHF204 -12GFHF204 -20mmGFHF205 -13GFHF205 -14GFHF205 -15GFHF205 -16GFHF205 -25mmGFHF206 -17GFHF206 -18GFHF206 -19GFHF206 -20GFHF206 -30mmGFHF207 -20GFHF207 -21GFHF207 -22GFHF207 -23GFHF207 -35mmGFHF208 -24GFHF208 -25GFHF208 -40mmGFHF209 -26GFHF209 -27GFHF209 -28GFHF209 -45mmGFHF210 -29GFHF210 -30GFHF210 -31GFHF210 -32GFHF210 -50mmGFHF211 -32GFHF211 -33GFHF211 -34GFHF211 -35GFHF211 -55mmGFHF212 -36GFHF212 -37GFHF212 -38GFHF212 -39GFHF212 -60mmG
Flange Units – Standard 4 BoltFHF200-G Series Eccentric Locking Collar
n Standard duty, high-grade cast ironn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
43
Sta
ndard
Mounte
d U
nits
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications.
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ri
Inner Ring
Outer Ring
Inner Ring
Outer Rin
Inner Ring
Full cover metal shroud
44
Flange Units – Narrow 4 BoltFHSFJ200-G Series Set Screw Locking
inmmDimensions
7/1611.1
3/89.5
17/3213.5
9/1614.3
19/3215.1
5/815.9
376.2
3 3/885.7
3 3/495.3
4 1/4107.9
4 5/8117.5
5 1/8130.2
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm
Unit No.
3/89.50
33/6413.10
13/3210.30
7/1611.10
31/6412.30
33/6413.10
45/6417.9
7/822.2
25/3219.8
27/3221.4
31/3224.6
1 1/3226.2
27/6411.0
27/6411.0
15/3212.0
15/3212.0
17/3213.5
37/6415.0
1.0025.5
1.2030.6
1.1729.8
1.2632.1
1.3734.8
1.5840.1
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.6316.00
0.6917.50
0.7719.50
0.8321.00
0.8922.50
1.0627.00
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmG
FJ-203-H
FJ-204-H
FJ-205-H
FJ-206-H
FJ-207-H
FJ-208-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
7/16
1/2
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
2 1/854.0
2 1/263.5
2 3/469.9
3 1/482.6
3 5/892.1
4101.6
FHSFJ201 -8GFHSFJ201 -12mmGFHSFJ202 -9GFHSFJ202 -10GFHSFJ202 -15mmGFHSFJ203 -11GFHSFJ203 -17mmGFHSFJ204 -12GFHSFJ204 -13GFHSFJ204 -20mmGFHSFJ205 -12GFHSFJ205 -13GFHSFJ205 -14GFHSFJ205 -15GFHSFJ205 -16GFHSFJ205 -25mmGFHSFJ206 -17GFHSFJ206 -18GFHSFJ206 -19GFHSFJ206 -20GFHSFJ206 -30mmGFHSFJ207 -20GFHSFJ207 -21GFHSFJ207 -22GFHSFJ207 -23GFHSFJ207 -35mmGFHSFJ208 -24GFHSFJ208 -25GFHSFJ208 -40mmG
n Standard duty, high-grade cast ironn Narrow housing follows USA/Domestic
dimensions.n Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
1. Units available with “FH” locking collar bearing: Example FHFJ205-16G2. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Sta
ndard
Mounte
d U
nits
45
inmmDimensions
3 7/898.4
4 7/32107.2
4 15/32113.5
5 13/16147.6
5 7/8149.2
6 1/8155.6
1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
.62615.90
.62615.90
.62615.90
2 11/3259.55
2 3/860.35
2 1/263.5
5/815.9
5/815.9
5/815.9
17/3213.5
17/3213.5
17/3213.5
1.9148.6
1.9148.6
1.9148.6
1.720543.700
1.720543.700
1.720543.700
FH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmG
F4X-208-HT
F4X-209-HT
F4X-210-HT
ShaftDiam. a e i b d g s f Z L
BoltSizeIn.
Bearing No. HousingNo.
1/2
1/2
1/2
3.53189.69
3.78196.04
3.969100.81
4 11/16119.1
4 3/4120.7
5127.0
FHF4X208 -24GFHF4X208 -25GFHF4X208 -40mmGFHF4X209 -26GFHF4X209 -27GFHF4X209 -28GFHF4X209 -45mmGFHF4X210 -29GFHF4X210 -30GFHF4X210 -31GFHF4X210 -32GFHF4X210 -50mmG
n
0.43311.00
0.43311.00
0.43311.00
W
2.3860.40
2.5063.50
2.7569.90
inmmDimensions
3 7/898.4
4 7/32107.2
4 15/32113.5
5 13/16147.6
5 7/8149.2
6 1/8155.6
1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
.62615.90
.62615.90
.62615.90
2 11/3259.55
2 3/860.35
2 1/263.5
5/815.9
5/815.9
5/815.9
17/3213.5
17/3213.5
17/3213.5
2.0050.8
2.0050.8
2.1354.0
2.216556.300
2.216556.300
2.468562.700
HC208 -24HC208 -25HC208 -40mmHC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mm
F4X-208-HT
F4X-209-HT
F4X-210-HT
ShaftDiam. a e i b d g s f Z L
BoltSizeIn.
Bearing No. HousingNo.
1/2
1/2
1/2
3.53189.69
3.78196.04
3.969100.81
4 11/16119.1
4 3/4120.7
5127.0
HCF4X208 -24HCF4X208 -25HCF4X208 -40mmHCF4X209 -26HCF4X209 -27HCF4X209 -28HCF4X209 -45mmHCF4X210 -29HCF4X210 -30HCF4X210 -31HCF4X210 -32HCF4X210 -50mm
n
0.84321.40
0.84321.40
0.96924.60
W
2.3760.30
2.5063.50
2.7569.90
Flange Units – Ductile 4 BoltFHF4X200-G / HCF4X200 Series Eccentric Locking Collar
n High strength ductile ironn Solid foot housing designn Wide inner ring bearing “HC”(requires
through panel mounting surface)n Relubricatable unit (shown) n Non-relubricatable unit available with
FH bearings only (omit “G” fromunit part number)
n Standard seal on FHF4X200-G Series:RST tight riding, full cover, metal
shroud sealsn Standard seal on HCF4X200
Series: R-Seal
Optional seals: See page 85
Sta
ndard
Mounte
d U
nits
1. Units available with “FHS” or “UC” style set screw locking bearing2. Units available with “GR” Grip-It 360 degree locking style bearing3. Units available for reverse mounting applications with any insert bearing
Example: HCF4X210-31-REV
FHF4X200-G
HCF4X200
1.315033.400
1.397635.500
1.574840.000
1.748044.400
2.015751.200
2.047252.000
2.141754.400
46
Flange Units – Cartridge 4 BoltUCFC200 Series Set Screw Locking
inmmDimensions in
mmDimensions
25/649.9
25/649.9
25/649.9
7/1611.1
7/1611.1
25/649.9
25/649.9
3 15/16100.0
4 17/32115.1
4 9/32124.6
5 5/16134.9
5 23/32145.3
6 5/16160.3
6 1/2165.1
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
2 11/6455.2
2 1/263.5
2 25/3270.6
3 1/1677.8
3 11/3284.9
3 43/6493.3
3 27/3297.6
31/3224.6
1 1/3226.3
1 5/6427.3
1 3/1630.0
1 13/3235.7
1 31/6437.6
1 33/6438.8
15/3211.9
15/3211.9
15/3211.9
35/6413.9
35/6413.9
5/815.9
5/815.9
13/645.2
15/645.9
5/167.9
5/167.9
25/649.9
15/3211.9
15/3211.9
11/1619.4
13/1620.4
49/6419.4
7/822.1
1 1/6425.8
1 1/6425.7
1 3/6426.9
2.44162.00
2.75670.00
3.15080.00
3.54390.00
3.937100.00
4.139105.00
4.331110.00
UC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mm
ShaftDiam. a p e i l s j K g f
BoltSizeIn.
BearingNo.
HousingNo.
3/8
3/8
3/8
7/16
7/16
1/2
1/2
9/327.1
9/327.1
5/167.9
11/328.7
11/328.7
9/1614.3
9/1614.3
3 5/6478.2
3 35/6490.1
3 15/16100.0
4 21/64109.9
4 23/32119.9
5 13/64132.2
5 7/16138.1
UCFC204 -12UCFC204 -13UCFC204 -20mmUCFC205 -13UCFC205 -14UCFC205 -15UCFC205 -16UCFC205 -25mmUCFC206 -17UCFC206 -18UCFC206 -19UCFC206 -20UCFC206 -30mmUCFC207 -20UCFC207 -21UCFC207 -22UCFC207 -23UCFC207 -35mmUCFC208 -24UCFC208 -25UCFC208 -40mmUCFC209 -26UCFC209 -27UCFC209 -28UCFC209 -45mmUCFC210 -29UCFC210 -30UCFC210 -31UCFC210 -32UCFC210 -50mm
Z Bi
1.220531.000
1.338634.000
1.500038.100
1.689042.900
1.937049.200
1.937049.200
2.031551.600
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
n
FC-204-H
FC-205-H
FC-206-H
FC-207-H
FC-208-H
FC-209-H
FC-210-H
n Standard duty, high-grade cast ironn Piloted flange offers extra support for
heavier loadsn Solid base housing designn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
47
2.299258.400
2.704768.700
2.736269.500
2.968575.400
3.082778.300
3.271783.100
3.440987.400
3.779596.000
inmmDimensions in
mmDimensions
33/6413.1
43/6417.1
5/815.9
43/6417.1
45/6417.9
45/6417.9
45/6417.9
55/6421.8
7 9/32184.9
7 11/16195.3
8 1/16204.8
8 15/32215.1
8 55/64225.0
9 7/16239.7
9 27/32250.0
10 7/16265.1
22 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
Unit No.
4 11/64105.9
4 29/64113.1
4 47/64120.3
4 59/64125.0
5 1/8130.6
5 9/16141.3
5 51/64147.2
6 1/8155.6
1 11/1643.0
1 7/847.6
1 31/3250.0
2 1/853.9
2 13/6455.9
2 9/3257.9
2 15/3262.7
2 11/1668.3
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
29/3223.0
29/3223.0
29/3223.0
15/3211.9
15/3211.9
35/6413.9
35/6413.9
5/815.9
5/815.9
45/6417.9
45/6417.9
1 7/3231.1
1 13/3235.7
1 27/6436.1
1 37/6440.0
1 37/6440.0
1 21/3242.0
1 49/6444.8
1 63/6450.4
4.922125.00
5.315135.00
5.709145.00
5.906150.00
6.297160.00
6.693170.00
7.087180.00
7.480190.00
UC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
ShaftDiam. a p e i l s j K g f
BoltSizeIn.
BearingNo.
HousingNo.
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
19/3215.1
19/3215.1
19/3215.1
23/3218.3
45/6417.9
23/3218.3
23/3218.3
25/3219.8
5 29/32150.0
6 19/64159.9
6 11/16169.9
6 31/32177.0
7 1/4184.2
7 7/8200.0
8 3/16207.9
8 21/32219.9
UCFC211 -32UCFC211 -33UCFC211 -34UCFC211 -35UCFC211 -55mmUCFC212 -36UCFC212 -37UCFC212 -38UCFC212 -39UCFC212 -60mmUCFC213 -40UCFC213 -41UCFC213 -65mmUCFC214 -42UCFC214 -43UCFC214 -44UCFC214 -70mmUCFC215 -45UCFC215 -46UCFC215 -47UCFC215 -48UCFC215 -75mmUCFC216 -50UCFC216 -80mmUCFC217 -52UCFC217 -55UCFC217 -85mmUCFC218 -56UCFC218 -90mm
Z Bi
2.189055.600
2.563065.100
2.563065.100
2.937074.600
3.063077.800
3.252082.600
3.374085.700
3.779596.000
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.10
1.56339.70
n
FC-211-H
FC-212-H
FC-213-H
FC-214-H
FC-215-H
FC-216-H
FC-217-H
FC-218-H
Sta
ndard
Mounte
d U
nits
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Medium duty available using UCX00 insert bearing: Example: UCFCX05-163. FC series can also be combined with the following inserts: HC, FH, FHS and GR series bearings
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
48
Flange Units – Flange Bracket 3 BoltUCFB200 Series Set Screw Locking
inmmDimensions
2 3/860.3
2 3/860.3
2 1/263.5
2 3/469.9
3 1/482.6
3 1/1677.8
3 5/3280.2
4101.6
4 1/4108.0
4 1/4108.0
4 3/4120.7
5 3/8136.5
6 1/8155.6
6 15/32164.3
6 27/32173.9
7 1/2190.5
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
2 1/263.5
2 1/263.5
2 3/469.9
3 1/482.6
3 3/495.3
3 15/16100.0
4 3/16106.4
4 5/8117.5
5/815.9
5/815.9
21/3216.7
47/6418.7
53/6421.0
53/6421.0
53/6421.0
53/6421.0
125.4
125.4
1 5/6427.2
1 7/6428.2
1 1/432.0
1 13/3235.7
1 1/238.0
1 1/238.0
25/649.9
25/649.9
25/649.9
25/649.9
33/6413.1
15/3211.9
15/3211.9
33/6413.1
1 11/1642.9
1 11/1642.9
1 13/1646.0
2 1/1652.4
2 3/860.3
2 3/860.3
2 9/1665.1
2 15/1674.6
7/822.2
7/822.2
1 1/828.6
1 1/431.8
1 1/431.8
1 5/841.3
1 11/1642.9
1 5/841.3
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mm
FB-204-HA
FB-204-HA
FB-205-HA
FB-206-HA
FB-207-HA
FB-208-HA
FB-209-HA
FB-210-HA
ShaftDiam. w A b D i l s g h j
BoltSizeIn.
Bearing No. HousingNo.
5/16
5/16
5/16
5/16
7/16
3/8
3/8
7/16
5/168.0
5/168.0
3/89.5
3/89.5
1/212.7
5/815.9
23/3218.3
1/212.7
376.2
376.2
3 3/885.7
3 3/495.3
4 1/4108.0
4 1/2114.3
4 3/4120.7
5 3/16131.8
UCFB201 -8UCFB201 -12mmUCFB202 -9UCFB202 -10UCFB202 -15mmUCFB203 -11UCFB203 -17mmUCFB204 -12UCFB204 -13UCFB204 -20mmUCFB205 -13UCFB205 -14UCFB205 -15UCFB205 -16UCFB205 -25mmUCFB206 -17UCFB206 -18UCFB206 -19UCFB206 -20UCFB206 -30mmUCFB207 -20UCFB207 -21UCFB207 -22UCFB207 -23UCFB207 -35mmUCFB208 -24UCFB208 -25UCFB208 -40mmUCFB209 -26UCFB209 -27UCFB209 -28UCFB209 -45mmUCFB210 -29UCFB210 -30UCFB210 -31UCFB210 -32UCFB210 -50mm
e
1 1/238.1
1 1/238.1
1 5/841.3
1 7/847.6
250.8
1 31/3250.0
2 1/854.0
2 3/469.9
z
1.3534.2
1.3534.2
1.4336.4
1.6140.9
1.8346.4
2.0251.2
2.0251.2
2.1153.6
n Standard duty, high-grade cast ironn Solid base housing designn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options:See page 85
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Available with optional bolt hole pattern (UCFBF204-12)3. FB series can also be combined with the following inserts: HC, FH, FHS and GR series bearings
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Flange Bracket 3 BoltGRFB200 Series GRIP-IT 360 Degree Locking
n Standard duty, high-grade cast ironn Solid base housing designn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
49
inmmDimensions
5/815.9
21/3216.7
47/6418.7
53/6421.0
53/6421.0
53/6421.0
53/6421.0
4 1/4108.0
4 3/4120.7
5 3/8136.5
6 1/8155.6
6 15/32164.3
6 27/32173.9
7 1/2190.5
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm
Unit No.
2 3/860.3
2 1/263.5
2 3/469.9
3 1/482.6
3 1/1677.8
3 5/3280.2
4101.6
125.4
1 5/6427.2
1 7/6428.2
1 1/432.0
1 13/3235.7
1 1/238.0
1 1/238.0
25/649.9
25/649.9
25/649.9
33/6413.1
15/3211.9
15/3211.9
33/6413.1
5/168.0
3/89.5
3/89.5
1/212.7
5/815.9
23/3218.3
1/212.7
1 11/1642.9
1 13/1646.0
2 1/1652.4
2 3/860.3
2 3/860.3
2 9/1665.1
2 15/1674.6
7/822.2
1 1/828.6
1 1/431.8
1 1/431.8
1 5/841.3
1 11/1642.9
1 5/841.3
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mm
FB-204-HA
FB-205-HA
FB-206-HA
FB-207-HA
FB-208-HA
FB-209-HA
FB-210-HA
ShaftDiam. w A b D i l s g h j
BoltSizeIn.
Bearing No. HousingNo.
5/16
5/16
5/16
7/16
3/8
3/8
7/16
2 1/263.5
2 3/469.9
3 1/482.6
3 3/495.3
3 15/16100.0
4 3/16106.4
4 5/8117.5
GRFB204 -12GRFB204 -13GRFB204 -20mmGRFB205 -13GRFB205 -14GRFB205 -15GRFB205 -16GRFB205 -25mmGRFB206 -17GRFB206 -18GRFB206 -19GRFB206 -20GRFB206 -30mmGRFB207 -20GRFB207 -21GRFB207 -22GRFB207 -23GRFB207 -35mmGRFB208 -24GRFB208 -25GRFB208 -40mmGRFB209 -26GRFB209 -27GRFB209 -28GRFB209 -45mmGRFB210 -29GRFB210 -30GRFB210 -31GRFB210 -32GRFB210 -50mm
e
1 1/238.1
1 5/841.3
1 7/847.6
250.8
1 31/3250.0
2 1/854.0
2 3/469.9
Z
1.5038.1
1.6140.8
1.7644.7
2.0151.0
2.1955.7
2.2055.9
2.3559.6
376.2
3 3/885.7
3 3/495.3
4 1/4108.0
4 1/2114.3
4 3/4120.7
5 3/16131.8
Sta
ndard
Mounte
d U
nits
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Available with optional bolt hole pattern (GRFBF204-12)3. FB series can also be combined with the following inserts: HC, FH, FHS and UC series bearings
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
2 3/3253.2
2 13/6455.9
2 13/1671.4
376.2
3 15/3288.1
3 3/1680.9
3 9/1690.5
3 3/495.3
4 9/16115.9
4 13/16122.2
.3189.10
.43711.10
.43711.10
.43711.10
.50012.70
1 19/3240.5
1 25/3245.2
1 7/847.6
2 9/3257.9
2 13/3261.1
13/3210.3
7/1611.1
1/212.7
19/3215.1
19/3215.1
9/327.1
11/328.7
11/328.7
13/3210.3
13/3210.3
0.885822.500
0.984325.000
1.063027.000
1.181130.000
1.259832.000
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
F3X-203-H
F3X-204-H
F3X-205-H
F3X-206-H
F3X-207-H
1/4
5/16
5/16
3/8
3/8
0.9925.1
1.1328.6
1.2030.6
1.2632.1
1.3935.2
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
50
n Standard duty, high strength ductile iron
n Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (Shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Ductile 3 BoltFHSF3X200-G Series Set Screw Locking
inmmDimensions
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e i b d g s Z Bi n
BoltSizeIn.
Bearing No. Housing No.
FHSF3X201 -8GFHSF3X201 -12mmGFHSF3X202 -9GFHSF3X202 -10GFHSF3X202 -15mmGFHSF3X203 -11GFHSF3X203 -17mmGFHSF3X204 -12GFHSF3X204 -13GFHSF3X204 -20mmGFHSF3X205 -12GFHSF3X205 -13GFHSF3X205 -14GFHSF3X205 -15GFHSF3X205 -16GFHSF3X205 -25mmGFHSF3X206 -17GFHSF3X206 -18GFHSF3X206 -19GFHSF3X206 -20GFHSF3X206 -30mmGFHSF3X207 -20GFHSF3X207 -21GFHSF3X207 -22GFHSF3X207 -23GFHSF3X207 -35mmG
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
For reverse mounting, add suffix “REV” after unit number:Example: FHSF3X205-16G-REV
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Ductile 3 BoltFHF3X200-G Series Eccentric Locking Collar
51
2 3/3253.2
2 13/6455.9
2 13/1671.4
376.2
3 15/3288.1
3 3/1680.9
3 9/1690.5
3 3/495.3
4 9/16115.9
4 13/16122.2
.3189.10
.43711.10
.43711.10
.43711.10
.50012.70
1 19/3240.5
1 25/3245.2
1 7/847.6
2 9/3257.9
2 13/3261.1
13/3210.3
7/1611.1
1/212.7
19/3215.1
19/3215.1
9/327.1
11/328.7
11/328.7
13/3210.3
13/3210.3
1.126028.600
1.220531.000
1.220531.000
1.405535.700
1.531538.900
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
F3X-203-H
F3X-204-H
F3X-205-H
F3X-206-H
F3X-207-H
1/4
5/16
5/16
3/8
3/8
1.2331.2
1.3634.6
1.3634.6
1.4937.8
1.6642.1
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
inmmDimensions
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e i b d g s Z L n
BoltSizeIn.
Bearing No. Housing No.
FHF3X201 -8GFHF3X201 -12mmGFHF3X202 -9GFHF3X202 -10GFHF3X202 -15mmGFHF3X203 -11GFHF3X203 -17mmGFHF3X204 -12GFHF3X204 -20mmGFHF3X205 -13GFHF3X205 -14GFHF3X205 -15GFHF3X205 -16GFHF3X205 -25mmGFHF3X206 -17GFHF3X206 -18GFHF3X206 -19GFHF3X206 -20GFHF3X206 -30mmGFHF3X207 -20GFHF3X207 -21GFHF3X207 -22GFHF3X207 -23GFHF3X207 -35mmG
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
n Standard duty, high strength ductile iron
n Solid foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Sta
ndard
Mounte
d U
nits
For reverse mounting, add suffix “REV” after unit number: Example: FHF3X205-16G-REV
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
52
n Standard duty, high-grade cast ironn Solid Foot housing designn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Round Hole 3 BoltFHSF3C200-G / FHF3C200-G Series
1.0326.2
1.1429.0
1.2932.7
1.3835.1
11/328.7
11/328.7
13/3210.3
13/3210.3
0.984325.000
1.063027.000
1.181130.000
1.259832.000
0.2957.50
0.2957.50
0.3549.00
0.3749.50
5/16
5/16
3/8
3/8
1 25/3266.7
2 51/6471.0
3 5/1684.1
3 11/1693.7
3 9/1690.5
3 3/495.3
4 7/16112.7
4 15/16125.4
3/413/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
.3448.73
.3739.47
.46211.73
.49712.62
1 25/3245.2
1 7/847.6
2 7/3256.4
2 15/3262.7
11/1617.5
11/1617.5
13/1620.6
7/822.2
FHS204 -12-GOFHS204 -13-GOFHS204 -20mm-GOFHS205 -12-GOFHS205 -13-GOFHS205 -14-GOFHS205 -15-GOFHS205 -16-GOFHS205 -25mm-GOFHS206 -17-GOFHS206 -18-GOFHS206 -19-GOFHS206 -20-GOFHS206 -30mm-GOFHS207 -20-GOFHS207 -21-GOFHS207 -22-GOFHS207 -23-GOFHS207 -35mm-GO
F3C-204-H
F3C-205-H
F3C-206-H
F3C-207-H
ShaftDiam. a e i b d g s Z Bi n
BoltSizeIn.
Bearing No.
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
FHSF3C204 -12GFHSF3C204 -13GFHSF3C204 -20mmGFHSF3C205 -12GFHSF3C205 -13GFHSF3C205 -14GFHSF3C205 -15GFHSF3C205 -16GFHSF3C205 -25mmGFHSF3C206 -17GFHSF3C206 -18GFHSF3C206 -19GFHSF3C206 -20GFHSF3C206 -30mmGFHSF3C207 -20GFHSF3C207 -21GFHSF3C207 -22GFHSF3C207 -23GFHSF3C207 -35mmG
Unit No. ShaftDiam.
BoltSizeIn.
HousingNo.
inmmDimensions
1.2732.2
1.3033.0
1.5138.4
1.6542.0
11/328.7
11/328.7
13/3210.3
13/3210.3
1.220531.000
1.220531.000
1.405535.700
1.531538.900
0.2957.50
0.2957.50
0.3549.00
0.3749.50
5/16
5/16
3/8
3/8
1 25/3266.7
2 51/6471.0
3 5/1684.1
3 11/1693.7
3 9/1690.5
3 3/495.3
4 7/16112.7
4 15/16125.4
3/420mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
.3448.73
.3739.47
.46211.73
.49712.62
1 25/3245.2
1 7/847.6
2 7/3256.4
2 15/3262.7
11/1617.5
11/1617.5
13/1620.6
7/822.2
FH204 -12-GOFH204 -20mm-GOFH205 -13-GOFH205 -14-GOFH205 -15-GOFH205 -16-GOFH205 -25mm-GOFH206 -17-GOFH206 -18-GOFH206 -19-GOFH206 -20-GOFH206 -30mm-GOFH207 -20-GOFH207 -21-GOFH207 -22-GOFH207 -23-GOFH207 -35mm-GO
F3C-204-H
F3C-205-H
F3C-206-H
F3C-207-H
L
FHSF3C200-G Set Screw Locking
Unit No. ShaftDiam. a e i b d g s Z
BoltSizeIn.
Bearing No.
FHF3C204 -12GFHF3C204 -20mmGFHF3C205 -13GFHF3C205 -14GFHF3C205 -15GFHF3C205 -16GFHF3C205 -25mmGFHF3C206 -17GFHF3C206 -18GFHF3C206 -19GFHF3C206 -20GFHF3C206 -30mmGFHF3C207 -20GFHF3C207 -21GFHF3C207 -22GFHF3C207 -23GFHF3C207 -35mmG
Unit No. ShaftDiam.
BoltSizeIn.
HousingNo.
inmmDimensions
n
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
FHF3C200-G Eccentric Collar Locking
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
1 1/41 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/8
2 3/1655mm
0.379.50
0.4311.00
0.4311.00
0.4311.00
0.4912.50
1.259832.000
1.496138.000
1.555139.500
1.716543.600
1.8145.90
3/8
1/2
1/2
1/2
1/2
13/3210.4
17/3213.5
17/3213
17/3213
17/3213
3 15/16100
4 11/16119
4 3/4121
5127
5 7/16138
3/420.2
13/1620.2
7/822
7/822
15/1624
4 13/16122.3
5 13/16148
5 7/8149
6 1/8156
6 9/16167
3 3/1681
3 9/1690
3 13/1690
4102
4 7/16113
FHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mmFHS208 -24FHS208 -25FHS208 -40mmFHS209 -26FHS209 -27FHS209 -28FHS209 -45mmFHS210 -29FHS210 -30FHS210 -31FHS210 -32FHS210 -50mmFHS211 -32FHS211 -33FHS211 -34FHS211 -35FHS211 -55mm
PFF-7Z
PFF-8Z
PFF-9Z
PFF-10Z
PFF-11Z
.1042.6
.1343.3
.1343.4
.1493.8
.1493.8
n Two light duty, self-aligning pressed steel housingsn Narrow inner ring bearingn Zinc plated stamped steel (shown)n Non-plated, raw stamped steel available
(FHSPFR/FHSPFFR Series)n Non-relubricatable unit (shown)n Relubricatable unit available (Add “G” suffix
to end of part number)n Standard seal: RST tight riding, full cover, metal
shroud seals
Optional seals: See page 85
53
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.885822.500
0.984325.000
1.063027.000
1.181130.000
1.259832.000
1/4
5/16
5/16
3/8
3/8
9/327
11/329
11/329
13/3210
13/3210
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm
Unit No.
9/1614
5/816
11/1617
11/1617
3/419
3 3/1681
3 9/1690
3 3/495
4 7/16113
4 13/16122
1 15/1649
2 3/1656
2 3/866
2 13/1671
3 3/1681
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mmFHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mm
PF-3Z
PF-4Z
PF-5Z
PF-6Z
PF-7Z
ShaftDiam. a e g c s f Bi n Bearing No.
.0741.9
.0832.1
.0832.1
.1042.6
.1042.6
FHSPFZ201 -8FHSPFZ201 -12mmFHSPFZ202 -9FHSPFZ202 -10FHSPFZ202 -15mmFHSPFZ203 -11FHSPFZ203 -17mmFHSPFZ204 -12FHSPFZ204 -13FHSPFZ204 -20mmFHSPFZ205 -12FHSPFZ205 -13FHSPFZ205 -14FHSPFZ205 -15FHSPFZ205 -16FHSPFZ205 -25mmFHSPFZ206 -17FHSPFZ206 -18FHSPFZ206 -19FHSPFZ206 -20FHSPFZ206 -30mmFHSPFZ207 -20FHSPFZ207 -21FHSPFZ207 -22FHSPFZ207 -23FHSPFZ207 -35mm
Unit No. ShaftDiam.
BoltSizeIn.
HousingNo.
inmmDimensions
FHSPFFZ207 -20FHSPFFZ207 -21FHSPFFZ207 -22FHSPFFZ207 -23FHSPFFZ207 -35mmFHSPFFZ208 -24FHSPFFZ208 -25FHSPFFZ208 -40mmFHSPFFZ209 -26FHSPFFZ209 -27FHSPFFZ209 -28FHSPFFZ209 -45mmFHSPFFZ210 -29FHSPFFZ210 -30FHSPFFZ210 -31FHSPFFZ210 -32FHSPFFZ210 -50mmFHSPFFZ211 -32FHSPFFZ211 -33FHSPFFZ211 -34FHSPFFZ211 -35FHSPFFZ211 -55mm
Stamped housings can be made in AISI 304 stainless steel. Combine with stainless steel bearing for maximum corrosion resistance: Example: SSFHSPF205-16
Flange Units – Pressed Steel 3 Bolt & 4 BoltFHSPFZ200 / FHSPFFZ200 Series Set Screw Locking
Sta
ndard
Mounte
d U
nits
FHSPFZ200 3-Bolt
FHSPFFZ200 4-Bolt
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
n Two light duty, self-aligning pressed steel housings
n Narrow inner ring bearingn Zinc plated stamped steel (shown)n Non-plated, raw stamped steel available
(FHPFR/FHPFFR Series)n Non-relubricatable unit (shown)n Relubricatable unit available (Add “G”
suffix to end of part number)n Standard Seal: RST tight riding, full cover,
metal shroud seals
Optional seals: See page 85
Flange Units – Pressed Steel 3 Bolt & 4 BoltFHPFZ200 / FHPFFZ200 Series Eccentric Locking Collar
54
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
1.126028.600
1.220531.000
1.220531.000
1.405535.700
1.531538.900
1/4
5/16
5/16
3/8
3/8
9/327
11/329
11/329
13/3210
13/3210
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
9/1614
5/816
11/1617
11/1617
3/419
3 3/1681
3 9/1690
3 3/495
4 7/16113
4 13/16122
1 15/1649
2 3/1656
2 3/866
2 13/1671
3 3/1681
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mmFH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mm
PF-3Z
PF-4Z
PF-5Z
PF-6Z
PF-7Z
ShaftDiam. a e g c s f L n Bearing No.
.0741.9
.0832.1
.0832.1
.1042.6
.1042.6
FHPFZ201 -8FHPFZ201 -12mmFHPFZ202 -9FHPFZ202 -10FHPFZ202 -15mmFHPFZ203 -11FHPFZ203 -17mmFHPFZ204 -12FHPFZ204 -20mmFHPFZ205 -13FHPFZ205 -14FHPFZ205 -15FHPFZ205 -16FHPFZ205 -25mmFHPFZ206 -17FHPFZ206 -18FHPFZ206 -19FHPFZ206 -20FHPFZ206 -30mmFHPFZ207 -20FHPFZ207 -21FHPFZ207 -22FHPFZ207 -23FHPFZ207 -35mm
Unit No. ShaftDiam.
BoltSizeIn.
HousingNo.
inmmDimensions
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
Unit No.Unit No.
FHPFFZ207-20FHPFFZ207-21FHPFFZ207-22FHPFFZ207-23FHPFFZ207-35mmFHPFFZ208-24FHPFFZ208-25FHPFFZ208-40mmFHPFFZ209-26FHPFFZ209-27FHPFFZ209-28FHPFFZ209-45mmFHPFFZ210-29FHPFFZ210-30FHPFFZ210-31FHPFFZ210-32FHPFFZ210-50mmFHPFFZ211-32FHPFFZ211-33FHPFFZ211-34FHPFFZ211-35FHPFFZ211-55mm
0.379.50
0.4311.00
0.4311.00
0.4311.00
0.4912.50
1.531538.900
1.720543.700
1.720543.700
1.720543.700
1.905548.400
3/8
1/2
1/2
1/2
1/2
13/3210.4
17/3213.5
17/3213
17/3213
17/3213
3 15/16100
4 11/16119
4 3/4121
5127
5 7/16138
1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm
3/420.2
13/1620.2
7/822
7/822
15/1624
4 13/16122.3
5 13/16148
5 7/8149
6 1/8156
6 9/16167
3 3/1681
3 9/1690
3 13/1690
4102
4 7/16113
FH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mmFH208 -24FH208 -25FH208 -40mmFH209 -26FH209 -27FH209 -28FH209 -45mmFH210 -29FH210 -30FH210 -31FH210 -32FH210 -50mmFH211 -32FH211 -33FH211 -34FH211 -35FH211 -55mm
.1042.6
.1343.3
.1343.4
.1493.8
.1493.8
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
PFF-7Z
PFF-8Z
PFF-9Z
PFF-10Z
PFF-11Z
Stamped housings could be made in AISI 304 stainless steel. Combine with stainless steel bearing for maximum corrosion resistance: Example: SSFHPF205-16
FHPFZ200 3-Bolt
FHPFFZ200 4-Bolt
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
n Two light duty, self-aligning pressed steel housingsn Narrow inner ring bearingn Zinc plated stamped steel (shown)n Non-plated, raw stamped steel available
(FHSPFTR/FHPFTR Series)n Non-relubricatable unit (shown)n Standard Seal: RST tight riding, full cover,
metal shroud seals
Optional seals: See page 85
55
inmmDimensions
9/327
11/329
11/329
13/3210
13/3210
2 23/3269
376
3 1/879
3 11/1694
4 5/32106
1 1/829
1 5/1633
1 3/835
1 1/238
1 3/444
9/1614
5/816
11/1617
11/1617
3/419
.0741.9
.0832.1
.0832.1
.1042.6
.1042.6
13/1621
1 1/1627
1 3/3228
125
1 17/6432
0.885822.500
0.984325.000
1.063027.000
1.181130.000
1.259832.000
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mmFHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mm
PFT-3Z
PFT-4Z
PFT-5Z
PFT-6Z
PFT-7Z
1/4
5/16
5/16
3/8
3/8
1 15/1649
2 3/1656
2 3/866
2 13/1671
3 3/1681
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
inmmDimensions
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e h s c g b f Bi n
BoltSizeIn.
Bearing No. Housing No.
FHSPFTZ201 -8FHSPFTZ201 -12mmFHSPFTZ202 -9FHSPFTZ202 -10FHSPFTZ202 -15mmFHSPFTZ203 -11FHSPFTZ203 -17mmFHSPFTZ204 -12FHSPFTZ204 -13FHSPFTZ204 -20mmFHSPFTZ205 -12FHSPFTZ205 -13FHSPFTZ205 -14FHSPFTZ205 -15FHSPFTZ205 -16FHSPFTZ205 -25mmFHSPFTZ206 -17FHSPFTZ206 -18FHSPFTZ206 -19FHSPFTZ206 -20FHSPFTZ206 -30mmFHSPFTZ207 -20FHSPFTZ207 -21FHSPFTZ207 -22FHSPFTZ207 -23FHSPFTZ207 -35mm
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
inmmDimensions
9/327
11/329
11/329
13/3210
13/3210
2 23/3269
376
3 1/879
3 11/1694
4 5/32106
1 1/829
1 5/1633
1 3/835
1 1/238
1 3/444
9/1614
5/816
11/1617
11/1617
3/419
.0741.9
.0832.1
.0832.1
.1042.6
.1042.6
13/1621
1 1/1627
1 3/3228
125
1 17/6432
1.126028.600
1.220531.000
1.220531.000
1.405535.700
1.531538.900
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mmFH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mm
PFT-3Z
PFT-4Z
PFT-5Z
PFT-6Z
PFT-7Z
1/4
5/16
5/16
3/8
3/8
1 15/1649
2 3/1656
2 3/866
2 13/1671
3 3/1681
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e h s c g b f L n Bearing No. Housing
No.FHPFTZ201 -8FHPFTZ201 -12mmFHPFTZ202 -9FHPFTZ202 -10FHPFTZ202 -15mmFHPFTZ203 -11FHPFTZ203 -17mmFHPFTZ204 -12FHPFTZ204 -20mmFHPFTZ205 -13FHPFTZ205 -14FHPFTZ205 -15FHPFTZ205 -16FHPFTZ205 -25mmFHPFTZ206 -17FHPFTZ206 -18FHPFTZ206 -19FHPFTZ206 -20FHPFTZ206 -30mmFHPFTZ207 -20FHPFTZ207 -21FHPFTZ207 -22FHPFTZ207 -23FHPFTZ207 -35mm
ShaftDiam.
BoltSizeIn.
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
Dimensions inmm
Stamped housings can be made in AISI 304 stainless steel. Combine with stainless steel bearing for maximum corrosion resistance: Example: SSFHSPFT205-16
Flange Units – Pressed Steel 3 Bolt TriangleFHSPFTZ200 / FHPFTZ200 Series
Sta
ndard
Mounte
d U
nits
FHSPFTZ200 Set Screw Locking
FHPFTZ200 Eccentric Locking Collar
RST-Seal
DBL-Seal
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
56
Flange Units – Standard 2 BoltUCFT200 Series Set Screw Locking
inmmDimensions
7/1611.1
7/1611.1
1/212.7
1/212.7
9/1614.3
9/1614.3
19/3215.1
3 7/898.4
4 7/16113.0
5 1/8130.2
5 13/16147.6
6 11/32161.1
6 7/8174.6
7 13/32188.1
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
Unit No.
.59415.10
.59115.00
.63016.00
.70918.00
.74819.00
.82821.00
.86622.00
125.4
15/1624.0
1 1/6426.0
1 5/3229.0
1 3/1630.0
1 13/3234.0
1 3/835.0
27/6411.0
27/6411.0
17/3213.5
17/3213.5
37/6415.0
37/6415.0
21/3217.0
2 1/854.0
2 3/860.3
2 11/1668.3
3 5/3280.2
3 17/3289.7
3 15/16100.0
4 1/4108.0
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mm
FT-203-H
FT-204-H
FT-205-H
FT-206-H
FT-207-H
FT-208-H
FT-209-H
ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
7/16
7/16
1/2
1/2
9/16
1.3233.4
1.3133.3
1.4135.7
1.5840.2
1.7544.4
2.0251.2
2.0652.2
376.2
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
UCFT201 -8UCFT201 -12mmUCFT202 -9UCFT202 -10UCFT202 -15mmUCFT203 -11UCFT203 -17mmUCFT204 -12UCFT204 -13UCFT204 -20mmUCFT205 -13UCFT205 -14UCFT205 -15UCFT205 -16UCFT205 -25mmUCFT206 -17UCFT206 -18UCFT206 -19UCFT206 -20UCFT206 -30mmUCFT207 -20UCFT207 -21UCFT207 -22UCFT207 -23UCFT207 -35mmUCFT208 -24UCFT208 -25UCFT208 -40mmUCFT209 -26UCFT209 -27UCFT209 -28UCFT209 -45mm
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
19/3215.1
23/3218.3
23/3218.3
25/3219.8
25/3219.8
25/3219.8
25/3219.8
7/822.2
29/3223.0
7 3/4196.9
8 13/16223.8
9 27/32250.0
10 5/32258.0
10 7/16265.1
10 13/16274.6
11 13/32289.7
12304.8
12 19/32319.9
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
.86622.00
1.00025.40
1.14229.00
1.18130.00
1.22031.00
1.34434.10
1.34434.10
1.40635.70
1.56339.70
1 17/3239.0
1 5/841.4
1 25/3245.0
1 27/3247.0
1 31/3250.0
2 1/854.0
2 5/3255.0
2 9/3258.0
2 31/6463.0
21/3217.0
45/6418.0
55/6422.0
55/6422.0
55/6422.0
55/6422.0
31/3225.0
31/3225.0
31/3225.0
4 17/32115.1
5 1/8130.2
5 1/2139.7
6 3/32154.8
6 5/16160.3
6 1/2165.1
7 3/32180.2
7 15/32189.7
8 1/16204.8
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.10
1.56339.70
UC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
FT-210-H
FT-211-H
FT-212-H
FT-213-H
FT-214-H
FT-215-H
FT-216-H
FT-217-H
FT-218-H
9/16
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
2.1554.6
2.3258.8
2.7068.7
2.7469.7
2.9775.4
3.0978.6
3.2883.4
3.4487.3
3.7896.0
6 3/16157.2
7 1/4184.2
7 15/16201.6
8 1/4209.6
8 1/2215.9
8 7/8225.4
9 3/16233.0
9 3/4247.7
10 17/64260.7
57
inmmDimensions
Unit No. ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
UCFT210 -29UCFT210 -30UCFT210 -31UCFT210 -32UCFT210 -50mmUCFT211 -32UCFT211 -33UCFT211 -34UCFT211 -35UCFT211 -55mmUCFT212 -36UCFT212 -37UCFT212 -38UCFT212 -39UCFT212 -60mmUCFT213 -40UCFT213 -41UCFT213 -65mmUCFT214 -42UCFT214 -43UCFT214 -44UCFT214 -70mmUCFT215 -45UCFT215 -46UCFT215 -47UCFT215 -48UCFT215 -75mmUCFT216 -50UCFT216 -80mmUCFT217 -52UCFT217 -55UCFT217 -85mmUCFT218 -56UCFT218 -90mm
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Overall length (‘a’ dimension) can be made to your specifications
Sta
ndard
Mounte
d U
nits
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
58
Flange Units – Medium Duty 2 BoltUCFTX00 Series Set Screw Locking
inmmDimensions
1/212.7
9/1614.3
9/1614.3
19/3215.1
19/3215.1
23/3218.3
5 13/16147.6
6 11/32161.1
6 7/8174.6
7 13/32188.1
7 3/4196.9
8 13/16223.8
13/167/8
15/161
25mm1 1/161 1/81 3/161 1/430mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm
Unit No.
.70918.00
.74819.00
.82821.00
.86622.00
.86622.00
125.40
1 5/3229.0
1 3/1630.0
1 13/3234.0
1 3/835.0
1 17/3239.0
1 5/841.4
17/3213.5
37/6415.0
37/6415.0
21/3217.0
21/3217.0
45/6418.0
3 5/3280.2
3 17/3289.7
3 15/16100.0
4 1/4108.0
4 17/32115.1
5 1/8130.2
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
UCX05 -13UCX05 -14UCX05 -15UCX05 -16UCX05 -25mmUCX06 -17UCX06 -18UCX06 -19UC207 -20 *UCX06 -30mmUCX07 -20UCX07 -21UCX07 -22UCX07 -23UCX07 -35mmUCX08 -24UCX08 -25UCX08 -40mmUCX09 -26UCX09 -27UCX09 -28UCX09 -45mmUCX10 -29UCX10 -30UCX10 -31UC211 -32 **UCX10 -50mm
FT-206-H
FT-207-H
FT-208-H
FT-209-H
FT-210-H
FT-211-H
ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
7/16
1/2
1/2
9/16
9/16
5/8
1.5840.2
1.7544.4
2.0251.2
2.0652.2
2.1554.6
2.3258.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
6 3/16157.2
7 1/4184.2
UCFTX05 -13UCFTX05 -14UCFTX05 -15UCFTX05 -16UCFTX05 -25mmUCFTX06 -17UCFTX06 -18UCFTX06 -19UCFT207 -20 *UCFTX06 -30mmUCFTX07 -20UCFTX07 -21UCFTX07 -22UCFTX07 -23UCFTX07 -35mmUCFTX08 -24UCFTX08 -25UCFTX08 -40mmUCFTX09 -26UCFTX09 -27UCFTX09 -28UCFTX09 -45mmUCFTX10 -29UCFTX10 -30UCFTX10 -31UCFT211 -32 **UCFTX10 -50mm
n Medium duty, high-grade cast ironn Solid base housing design for added strengthn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
23/3218.3
25/3219.8
25/3219.8
25/3219.8
25/3219.8
7/822.2
29/3223.0
9 27/32250.0
10 5/32258.0
10 7/16265.1
10 13/16274.6
11 13/32289.7
12304.8
12 19/32319.9
22 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
Unit No.
1.14229.00
1.18130.00
1.22031.00
1.34434.10
1.34434.10
1.40635.70
1.56339.70
1 25/3245.0
1 27/3247.0
1 31/3250.0
2 1/854.0
2 5/3255.0
2 9/3258.0
2 31/6463.0
55/6422.0
55/6422.0
55/6422.0
55/6422.0
31/3225.0
31/3225.0
31/3225.0
5 1/2139.7
6 3/32154.8
6 5/16160.3
6 1/2165.1
7 3/32180.2
7 15/32189.7
8 1/16204.8
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
1.34334.101.56339.70
UCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
FT-212-H
FT-213-H
FT-214-H
FT-215-H
FT-216-H
FT-217-H
FT-218-H
ShaftDiam. a e i g l s b Z Bi N
BoltSizeIn.
Bearing No. Housing No.
3/4
3/4
3/4
3/4
7/8
7/8
7/8
2.7068.7
2.7469.7
2.9775.4
3.0978.6
3.2883.4
3.4487.33.7896.0
7 15/16201.6
8 1/4209.6
8 1/2215.9
8 7/8225.4
9 3/16233.0
9 3/4247.7
10 17/64260.7
UCFTX11 -32UCFTX11 -33UCFTX11 -34UCFTX11 -35UCFT212 -36 ***UCFTX11 -55mmUCFTX12 -37UCFTX12 -38UCFTX12 -39UCFTX12 -60mmUCFTX13 -40UCFTX13 -41UCFTX13 -65mmUCFTX14 -42UCFTX14 -43UCFTX14 -44UCFTX14 -70mmUCFTX15 -45UCFTX15 -46UCFTX15 -47UCFTX15 -48UCFTX15 -75mmUCFTX16 -50UCFTX16 -80mmUCFTX17 -52UCFTX17 -85mm
59
*UCFTX06-20 uses standard UC207-20 bearing and therefore is listed as UCFT207-20**UCFTX10-32 uses standard UC211-32 bearing and therefore is listed as UCFT211-32***UCFTX11-36 uses standard UC212-36 bearing and therefore is listed as UCFT212-36
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
Sta
ndard
Mounte
d U
nits
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
60
Flange Units – Standard 2 BoltHCFTS200 Series Eccentric Locking Collar
inmmDimensions
7/1611.1
7/1611.1
7/1611.1
17/3213.5
17/3213.5
9/1614.3
9/1614.3
3 7/898.4
4 7/16113.0
4 7/16113.0
4 7/8123.8
5 9/16141.3
6 1/8155.6
6 3/4171.5
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No.
.7519.10
.7519.10
.7519.10
.7519.10
.82621.00
.90623.00
125.40
1 1/431.6
1 9/6429.0
1 9/6429.0
1 5/3229.6
1 3/834.9
1 15/3237.3
1 17/3238.9
25/6410.0
15/3212.0
15/3212.0
15/3212.0
15/3212.0
37/6415.0
17/3213.5
2 3/860.3
2 3/860.3
2 3/860.3
2 3/469.9
3 1/879.4
3 5/892.1
4 1/8104.8
1.46937.30
1.71343.50
1.71343.50
1.74444.30
1.90248.30
2.01251.10
2.21756.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
FTS-203S-H
FTS-204-H
FTS-204-H
FTS-205-H
FTS-206-H
FTS-207-H
FTS-208-H
ShaftDiam. a e i g l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
5/16
3/8
3/8
3/8
3/8
1/2
7/16
1.6742.5
1.8045.6
1.8045.6
1.8146.0
2.0151.1
2.1855.3
2.3760.3
376.2
3 17/3289.7
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
HCSFTS201 -8HCSFTS201 -12mmHCSFTS202 -9HCSFTS202 -10HCSFTS202 -15mmHCSFTS203 -11HCSFTS203 -17mmHCFTS201 -8HCFTS201 -12mmHCFTS202 -9HCFTS202 -10HCFTS202 -15mmHCFTS203 -11HCFTS203 -17mmHCFTS204 -12HCFTS204 -20mmHCFTS205 -13HCFTS205 -14HCFTS205 -15HCFTS205 -16HCFTS205 -25mmHCFTS206 -17HCFTS206 -18HCFTS206 -19HCFTS206 -20HCFTS206 -30mmHCFTS207 -20HCFTS207 -21HCFTS207 -22HCFTS207 -23HCFTS207 -35mmHCFTS208 -24HCFTS208 -25HCFTS208 -40mm
W
1.1328.60
1.2632.00
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3760.30
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Wide inner ring bearingn Relubricatable unitn Standard seal: R-Seal
Triple lip seal and other options: See page 85
inmmDimensions
9/1614.3
9/1614.3
13/1620.6
13/1620.6
7/822.2
7/822.2
7/822.2
7 1/16179.4
7 7/16189.0
8 1/2216.0
9 1/4235.0
9 3/4247.7
10 1/8257.2
10 15/32265.9
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
1.00025.40
1.18130.00
1.29933.30
1.34434.10
1.50038.10
1.50038.10
1.60940.90
1 3/444.5
1 27/3246.8
1 31/3250.0
2 3/3253.2
2 5/1658.7
2 7/1661.9
2 9/1665.1
21/3217.0
21/3217.0
21/3217.0
21/3217.0
45/6418.0
45/6418.0
45/6418.0
4 3/8111.1
4 9/16115.9
5 1/4133.4
5 7/16138.1
5 31/32151.6
6 1/4158.8
6 1/2165.1
2.21756.30
2.46962.70
2.81171.40
3.06377.80
3.37485.70
3.37485.70
3.62692.10
0.84321.40
0.96924.60
1.09027.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
HC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mmHC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
FTS-209-H
FTS-210-H
FTS-211-H
FTS-212-H
FTS-213-H
FTS-214-H
FTS-215-H
ShaftDiam. a e i G l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
9/16
9/16
9/16
9/16
5/8
5/8
5/8
2.3760.3
2.6868.1
3.0377.0
3.1981.0
3.5389.7
3.5389.7
3.7795.7
5 27/32148.4
6 3/16157.2
7 1/4184.2
7 15/16201.6
8 1/4209.6
8 1/2215.9
8 7/8225.4
HCFTS209 -26HCFTS209 -27HCFTS209 -28HCFTS209 -45mmHCFTS210 -29HCFTS210 -30HCFTS210 -31HCFTS210 -32HCFTS210 -50mmHCFTS211 -32HCFTS211 -33HCFTS211 -34HCFTS211 -35HCFTS211 -55mmHCFTS212 -36HCFTS212 -37HCFTS212 -38HCFTS212 -39HCFTS212 -60mmHCFTS213 -40HCFTS213 -41HCFTS213 -65mmHCFTS214 -42HCFTS214 -43HCFTS214 -44HCFTS214 -70mmHCFTS215 -45HCFTS215 -46HCFTS215 -47HCFTS215 -48HCFTS215 -75mm
W
2.5063.50
2.7569.90
3.0076.20
3.3184.10
3.3986.00
3.5490.00
4.00101.60
61
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
Sta
ndard
Mounte
d U
nits
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
62
Flange Units – Standard 2 BoltGRFT200 Series GRIP-IT 360 Degree Locking
inmmDimensions
7/1611.1
1/212.7
1/212.7
9/1614.3
9/1614.3
19/3215.1
4 7/16113.0
5 1/8130.2
5 13/16147.6
6 11/32161.1
6 7/8174.6
7 13/32188.1
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
Unit No.
.59115.00
.63016.00
.70918.00
.74819.00
.82821.00
.86622.00
15/1624.0
1 1/6426.0
1 5/3229.0
1 3/1630.0
1 13/3234.0
1 3/835.0
27/6411.0
17/3213.5
17/3213.5
37/6415.0
37/6415.0
21/3217.0
2 3/860.3
2 11/1668.3
3 5/3280.2
3 17/3289.7
3 15/16100.0
4 1/4108.0
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mm
FT-204-H
FT-205-H
FT-206-H
FT-207-H
FT-208-H
FT-209-H
ShaftDiam. a e i g l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
7/16
7/16
1/2
1/2
9/16
1.4637.2
1.5840.1
1.7344.0
1.9349.0
2.1955.7
2.2456.9
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
GRFT204 -12GRFT204 -13GRFT204 -20mmGRFT205 -13GRFT205 -14GRFT205 -15GRFT205 -16GRFT205 -25mmGRFT206 -17GRFT206 -18GRFT206 -19GRFT206 -20GRFT206 -30mmGRFT207 -20GRFT207 -21GRFT207 -22GRFT207 -23GRFT207 -35mmGRFT208 -24GRFT208 -25GRFT208 -40mmGRFT209 -26GRFT209 -27GRFT209 -28GRFT209 -45mm
W
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black Oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
63
inmmDimensions
19/3215.1
23/3218.3
23/3218.3
25/3219.8
25/3219.8
25/3219.8
7 3/4196.9
8 13/16223.8
9 27/32250.0
10 5/32258.0
10 7/16265.1
10 13/16274.6
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
.86622.00
1.00025.40
1.14229.00
1.18130.00
1.22031.00
1.34434.10
1 17/3239.0
1 5/841.4
1 25/3245.0
1 27/3247.0
1 31/3250.0
2 1/854.0
21/3217.0
45/6418.0
55/6422.0
55/6422.0
55/6422.0
55/6422.0
4 17/32115.1
5 1/8130.2
5 1/2139.7
6 3/32154.8
6 5/16160.3
6 1/2165.1
2.26857.60
2.42961.70
2.84672.30
2.84672.30
3.22081.80
3.35885.30
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
GR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215-45GR215 -46GR215 -47GR215 -48GR215 -75mm
FT-210-H
FT-211-H
FT-212-H
FT-213-H
FT-214-H
FT-215-H
ShaftDiam.
BoltSizeIn.
Bearing No. HousingNo.
9/16
5/8
3/4
3/4
3/4
3/4
2.3960.6
2.5664.9
2.9975.9
3.0376.9
3.2582.6
3.3986.1
6 3/16157.2
7 1/4184.2
7 15/16201.6
8 1/4209.6
8 1/2215.9
8 7/8225.4
GRFT210 -29GRFT210 -30GRFT210 -31GRFT210 -32GRFT210 -50mmGRFT211 -32GRFT211 -33GRFT211 -34GRFT211 -35GRFT211 -55mmGRFT212 -36GRFT212 -37GRFT212 -38GRFT212 -39GRFT212 -60mmGRFT213 -40GRFT213 -41GRFT213 -65mmGRFT214 -42GRFT214 -43GRFT214 -44GRFT214 -70mmGRFT215-45GRFT215 -46GRFT215 -47GRFT215 -48GRFT215 -75mm
3.3986.00
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
a e i g l s b Z L n W
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Overall length (‘a’ dimension) can be made to your specifications
Sta
ndard
Mounte
d U
nits
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
64
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Standard 2 BoltFHSFT200-G Series Set Screw Locking
25/6410.0
7/1611.1
1/212.7
1/212.7
9/1614.3
9/1614.3
19/3215.1
19/3215.1
23/3218.3
3 29/3299.2
4 7/16113.0
5 1/8130.2
5 13/16147.6
6 11/32161.1
6 7/8174.6
7 13/32188.1
7 3/4196.9
8 13/16223.8
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
.51513.10
.59115.00
.63016.00
.70918.00
.74819.00
.82821.00
.86622.00
.86622.00
1.00025.40
55/6421.8
15/1624.0
1 1/6426.0
1 5/3229.0
1 3/1630.0
1 13/3234.0
1 3/835.0
1 17/3239.0
1 5/841.4
27/6411.0
27/6411.0
17/3213.5
17/3213.5
37/6415.0
37/6415.0
21/3217.0
21/3217.0
45/6418.0
2 1/854.0
2 3/860.3
2 11/1668.3
3 5/3280.2
3 17/3289.7
3 15/16100.0
4 1/4108.0
4 17/32115.1
5 1/8130.2
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
1.55539.50
1.71743.60
1.8145.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -26GFHS209 -27GFHS209 -28GFHS209 -45mmGFHS210 -29GFHS210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFHS211 -33GFHS211 -34GFHS211 -35GFHS211 -55mmG
FTJ-203SD-H
FT-204-H
FT-205-H
FT-206-H
FT-207-H
FT-208-H
FT-209-H
FT-210-H
FT-211-H
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
1.1529.1
1.2832.5
1.4035.5
1.5439.0
1.6341.5
1.8948.0
1.9950.5
2.1554.6
3.2682.9
376.2
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
6 3/16157.2
7 1/4184.2
inmmDimensions
Unit No. ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
FHSFTJ201D-8GFHSFTJ201D-12mmGFHSFTJ202D-9GFHSFTJ202D-10GFHSFTJ202D-15mmGFHSFTJ203D-11GFHSFTJ203D-17mmGFHSFT204 -12GFHSFT204 -13GFHSFT204 -20mmGFHSFT205 -12GFHSFT205 -13GFHSFT205 -14GFHSFT205 -15GFHSFT205 -16GFHSFT205 -25mmGFHSFT206 -17GFHSFT206 -18GFHSFT206 -19GFHSFT206 -20GFHSFT206 -30mmGFHSFT207 -20GFHSFT207 -21GFHSFT207 -22GFHSFT207 -23GFHSFT207 -35mmGFHSFT208 -24GFHSFT208 -25GFHSFT208 -40mmGFHSFT209 -26GFHSFT209 -27GFHSFT209 -28GFHSFT209 -45mmFHSFT210 -29GFHSFT210 -30GFHSFT210 -31GFHSFT210 -32GFHSFT210 -50mmGFHSFT211 -32GFHSFT211 -33GFHSFT211 -34GFHSFT211 -35GFHSFT211 -55mmG
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Overall length (‘a’ dimension) can be made to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
ShaftDiam.
Flange Units – Standard 2 BoltFHFT200-G Series Eccentric Locking Collar
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
65
Sta
ndard
Mounte
d U
nits
inmmDimensions
Unit No. a e i g l s b Z L nBoltSizeIn.
Bearing No. HousingNo.W
25/6410.0
7/1611.1
1/212.7
1/212.7
9/1614.3
9/1614.3
19/3215.1
19/3215.1
23/3218.3
23/3218.3
3 29/3299.2
4 7/16113.0
5 1/8130.2
5 13/16147.6
6 11/32161.1
6 7/8174.6
7 13/32188.1
7 3/4196.9
8 13/16223.8
9 27/32250.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/162 7/16
.51513.10
.59115.00
.63016.00
.70918.00
.74819.00
.82821.00
.86622.00
.86622.00
1.00025.40
1.14229.00
55/6421.8
15/1624.0
1 1/6426.0
1 5/3229.0
1 3/1630.0
1 13/3234.0
1 3/835.0
1 17/3239.0
1 5/841.4
1 25/3245.0
27/6411.0
27/6411.0
17/3213.5
17/3213.5
37/6415.0
37/6415.0
21/3217.0
21/3217.0
45/6418.0
55/6422.0
2 1/854.0
2 3/860.3
2 11/1668.3
3 5/3280.2
3 17/3289.7
3 15/16100.0
4 1/4108.0
4 17/32115.1
5 1/8130.2
5 1/2139.7
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
1.72043.70
1.72043.70
1.72043.70
1.90648.40
1.94149.30
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
0.53213.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -37GFH212 -38GFH212 -39GFH212 -60mmG
FTJ-203SD-H
FT-204-H
FT-205-H
FT-206-H
FT-207-H
FT-208-H
FT-209-H
FT-210-H
FT-211-H
FT-212-H
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
3/4
1.3935.2
1.5238.5
1.5639.5
1.7644.7
1.9148.4
2.1153.7
2.1554.7
2.1554.7
2.4161.3
2.5564.8
376.2
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
6 3/16157.2
7 1/4184.2
7 15/16201.6
FHFTJ201D -8GFHFTJ201D -12mmGFHFTJ202D -9GFHFTJ202D -10GFHFTJ202D -15mmGFHFTJ203D -11GFHFTJ203D -17mmGFHFT204 -12GFHFT204 -20mmGFHFT205 -13GFHFT205 -14GFHFT205 -15GFHFT205 -16GFHFT205 -25mmGFHFT206 -17GFHFT206 -18GFHFT206 -19GFHFT206 -20GFHFT206 -30mmGFHFT207 -20GFHFT207 -21GFHFT207 -22GFHFT207 -23GFHFT207 -35mmGFHFT208 -24GFHFT208 -25GFHFT208 -40mmGFHFT209 -26GFHFT209 -27GFHFT209 -28GFHFT209 -45mmGFHFT210 -29GFHFT210 -30GFHFT210 -31GFHFT210 -32GFHFT210 -50mmGFHFT211 -32GFHFT211 -33GFHFT211 -34GFHFT211 -35GFHFT211 -55mmGFHFT212 -36GFHFT212 -37GFHFT212 -38GFHFT212 -39GFHFT212 -60mmG
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
3.3184.20
1. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications2. Overall length (‘a’ dimension) can be made to your specifications
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Rin
Inner Ring
Outer Ring
Inner Ring
Outer Rin
Inner Ring
Full cover metal shroud
66
n Standard duty, high-grade cast ironn Solid base housing design for added strengthn Narrow housing follows USA/domestic
dimensionsn Narrow inner ring bearingn Relubricatable unit (shown)n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Narrow Steel 2 BoltFHFTJ200-G Series Eccentric Locking Collar
inmmDimensions
25/6410.0
7/1611.1
7/1611.1
17/3213.5
9/1614.3
9/1614.3
5/815.9
29/3211.5
43/6417.1
3 29/3299.2
4 13/32111.9
4 7/8123.8
5 9/16141.3
6 1/8155.6
6 3/4171.5
7 1/16179.4
7 7/16188.9
8 3/16223.8
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm
Unit No.
.51513.10
.40610.30
.40610.30
.43811.10
.48412.30
.51613.10
.59415.10
.59415.10
.73818.70
55/6421.8
3/419.1
25/3219.8
27/3221.4
31/3224.6
1 1/3226.2
1 1/828.6
1 11/1642.9
1 29/6436.9
27/6411.0
27/6411.0
17/3213.5
17/3213.5
37/6415.0
17/3213.5
37/6415.0
37/6415.0
45/6417.9
2 1/854.0
2 9/1665.1
2 3/469.9
3 1/879.4
3 5/892.1
4 1/8104.8
4 3/8111.1
4 35/64115.5
5 3/64128.2
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
1.72043.70
1.72043.70
1.72043.70
1.90648.40
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
0.43311.00
0.43311.00
0.43311.00
0.49212.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmG
FTJ-203SD-H
FTJ-204-H
FTJ-205-H
FTJ-206-H
FTJ-207-H
FTJ-208-H
FTJ-209-H
FTJ-210-H
FTJ-211-H
ShaftDiam. a e i g l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
7/16
7/16
1/2
1/2
1/2
1/2
11/16
1.3935.2
1.3333.8
1.3333.8
1.4937.8
1.6441.7
1.8045.8
1.8847.8
1.8847.8
2.1554.6
376.2
3 17/3289.7
3 57/6498.8
4 19/32116.7
5 1/8130.2
5 21/32143.7
5 27/32148.4
6 3/16157.2
7 1/4184.2
FHFTJ201D -8GFHFTJ201D -12mmGFHFTJ202D -9GFHFTJ202D -10GFHFTJ202D -15mmGFHFTJ203D -11GFHFTJ203D -17mmGFHFTJ204 -12GFHFTJ204 -20mmGFHFTJ205 -13GFHFTJ205 -14GFHFTJ205 -15GFHFTJ205 -16GFHFTJ205 -25mmGFHFTJ206 -17GFHFTJ206 -18GFHFTJ206 -19GFHFTJ206 -20GFHFTJ206 -30mmGFHFTJ207 -20GFHFTJ207 -21GFHFTJ207 -22GFHFTJ207 -23GFHFTJ207 -35mmGFHFTJ208 -24GFHFTJ208 -25GFHFTJ208 -40mmGFHFTJ209 -26GFHFTJ209 -27GFHFTJ209 -28GFHFTJ209 -45mmGFHFTJ210 -29GFHFTJ210 -30GFHFTJ210 -31GFHFTJ210 -32GFHFTJ210 -50mmGFHFTJ211 -32GFHFTJ211 -33GFHFTJ211 -34GFHFTJ211 -35GFHFTJ211 -55mmG
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
2.3860.40
2.5063.50
2.7569.90
3.0076.20
1. Units available with “FHS” set screw locking style bearings Example: FHSFTJ205-16G
2. Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Light Duty 2 BoltFHSLF200-G / FHLF200-G Series
n Light duty, high-grade cast ironn Ideal for applications with limited mounting spacen Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available (omit “G” from
unit part number)n Standard seal: RST tight riding,full cover, metal
shroud seals
Optional seals: See page 85
67
Sta
ndard
Mounte
d U
nits
3 3/1681.0
3 17/3289.7
3 3/495.3
4 7/16112.7
4 13/16122.2
2 7/3256.4
2 13/3261.1
2 17/3264.3
376.2
3 1/288.9
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
LF-203-H
LF-204-H
LF-205-H
LF-206-H
LF-207-H
1/4
5/16
5/16
3/8
3/8
2 1/263.5
2 13/1671.4
2 63/6475.8
3 9/1690.5
3 15/16100.0
inmmDimensions
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
FHSLF201 -8GFHSLF201 -12mmGFHSLF202 -9GFHSLF202 -10GFHSLF202 -15mmGFHSLF203 -11GFHSLF203 -17mmGFHSLF204 -12GFHSLF204 -13GFHSLF204 -20mmGFHSLF205 -12GFHSLF205 -13GFHSLF205 -14GFHSLF205 -15GFHSLF205 -16GFHSLF205 -25mmGFHSLF206 -17GFHSLF206 -18GFHSLF206 -19GFHSLF206 -20GFHSLF206 -30mmGFHSLF207 -20GFHSLF207 -21GFHSLF207 -22GFHSLF207 -23GFHSLF207 -35mmG
Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
inmmDimensions
3/89.5
7/1611.1
7/1611.1
15/3211.9
33/6413.1
3 3/1681.0
3 17/3289.7
3 3/495.3
4 7/16112.7
4 13/16122.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
.3759.50
.43811.10
.43811.10
.46911.90
.51613.10
23/3218.3
25/3219.8
25/3219.8
7/822.2
15/1623.8
5/167.9
25/6410.0
25/6410.0
15/3211.9
15/3211.9
2 7/3256.4
2 13/3261.1
2 17/3264.3
376.2
3 1/288.9
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
LF-203-H
LF-204-H
LF-205-H
LF-206-H
LF-207-H
ShaftDiam. a e i g l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
1/4
5/16
5/16
3/8
3/8
1.2431.6
1.3634.6
1.3634.6
1.5238.6
1.6742.5
2 1/263.5
2 13/1671.4
2 63/6475.8
3 9/1690.5
3 15/16100.0
FHLF201 -8GFHLF201 -12mmGFHLF202 -9GFHLF202 -10GFHLF202 -15mmGFHLF203 -11GFHLF203 -17mmGFHLF204 -12GFHLF204 -20mmGFHLF205 -13GFHLF205 -14GFHLF205 -15GFHLF205 -16GFHLF205 -25mmGFHLF206 -17GFHLF206 -18GFHLF206 -19GFHLF206 -20GFHLF206 -30mmGFHLF207 -20GFHLF207 -21GFHLF207 -22GFHLF207 -23GFHLF207 -35mmG
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
.3759.50
.43811.10
.43811.10
.46911.90
.51613.10
3/89.5
7/1611.1
7/1611.1
15/3211.9
33/6413.1
23/3218.3
25/3219.8
25/3219.8
7/822.2
15/1623.8
5/167.9
25/6410.0
25/6410.0
15/3211.9
15/3211.9
1.0025.5
1.1328.6
1.2030.6
1.3032.9
1.4035.6
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHSLF200-G Set Screw Locking
FHLF200-G Eccentric Locking Collar
RST-Seal
DBL-Seal
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
68
n Light duty, high-grade cast ironn Ideal for applications with limited
mounting spacen Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Light Duty 2 BoltFHSFD200-G / FHFD200-G Series
Unit No. ShaftDiam. a e i g s b Z Bi Bearing No.Unit No. ShaftDiam.
BoltSizeIn.
HousingNo.
inmmDimensions
n
inmmDimensions
Unit No. ShaftDiam. a e i g s b Z L n W
BoltSizeIn.
Bearing No. Housing No.Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
Bolt hole diameter (‘s’ dimension) can be drilled to your specifications
.3288.30
.3759.50
.3759.50
.46911.90
.48412.30
9/327.1
25/6410.0
25/6410.0
15/3211.9
15/3211.9
2 5/1658.7
2 3/469.7
2 25/3270.6
3 5/1684.1
3 11/1693.7
0.9624.3
1.0627.0
1.1429.0
1.3032.9
1.3734.8
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
1/4
5/16
5/16
3/8
3/8
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
FD-203-H
FD-204-H
FD-205-H
FD-206-H
FD-207-H
FHSFD201 -8GFHSFD201 -12mmGFHSFD202 -9GFHSFD202 -10GFHSFD202 -15mmGFHSFD203 -11GFHSFD203 -17mmGFHSFD204 -12GFHSFD204 -13GFHSFD204 -20mmGFHSFD205 -12GFHSFD205 -13GFHSFD205 -14GFHSFD205 -15GFHSFD205 -16GFHSFD205 -25mmGFHSFD206 -17GFHSFD206 -18GFHSFD206 -19GFHSFD206 -20GFHSFD206 -30mmGFHSFD207 -20GFHSFD207 -21GFHSFD207 -22GFHSFD207 -23GFHSFD207 -35mmG
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
3 3/1681.0
3 17/3289.7
3 3/495.3
4 7/16112.7
4 29/32124.6
2 15/3262.7
2 25/3270.6
376.2
3 17/3289.7
3 15/16100.0
19/3215.1
21/3216.7
21/3216.7
13/1620.6
7/822.2
FHFD201 -8GFHFD201 -12mmGFHFD202 -9GFHFD202 -10GFHFD202 -15mmGFHFD203 -11GFHFD203 -17mmGFHFD204 -12GFHFD204 -20mmGFHFD205 -13GFHFD205 -14GFHFD205 -15GFHFD205 -16GFHFD205 -25mmGFHFD206 -17GFHFD206 -18GFHFD206 -19GFHFD206 -20GFHFD206 -30mmGFHFD207 -20GFHFD207 -21GFHFD207 -22GFHFD207 -23GFHFD207 -35mmG
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
3 3/1681.0
3 17/3289.7
3 3/495.3
4 7/16112.7
4 29/32124.6
2 15/3262.7
2 25/3270.6
376.2
3 17/3289.7
3 15/16100.0
.3288.30
.3759.50
.3759.50
.46911.90
.48412.30
19/3215.1
21/3216.7
21/3216.7
13/1620.6
7/822.2
9/327.1
25/6410.0
25/6410.0
15/3211.9
15/3211.9
2 5/1658.7
2 3/469.7
2 25/3270.6
3 5/1684.1
3 11/1693.7
1.2030.4
1.3033.0
1.3033.0
1.5238.6
1.6441.7
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
1/4
5/16
5/16
3/8
3/8
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
FD-203-H
FD-204-H
FD-205-H
FD-206-H
FD-207-H
FHSFD200-G Set Screw Locking
FHFD200-G Eccentric Locking Collar
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Ductile Flush 2 BoltFHSFLCTQ200-G / FHFLCTQ200-G Series
n Standard duty, high strength ductile ironn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Sta
ndard
Mounte
d U
nits
69
inmmDimensions
9/327.1
3/89.5
3/89.5
7/1611.1
7/1611.1
3 3/1681.0
3 9/1690.5
3 3/495.3
4 7/16112.7
4 15/16125.4
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
2 5/1658.7
2 5/866.7
2 51/6471.0
3 5/1684.1
3 11/1693.7
37/6414.7
43/6417.1
11/1617.5
13/1620.6
7/822.2
19/647.5
21/648.3
11/328.7
13/3210.3
7/1611.1
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
0.2566.50
0.2597.50
0.2597.50
0.3549.00
0.3749.50
FLCTQ-203-H
FLCTQ-204-H
FLCTQ-205-H
FLCTQ-206-H
FLCTQ-207-H
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
ShaftDiam. a e b S
Square g i Z L n Bearing No. Housing No.
1.1729.6
1.2531.8
1.2732.2
1.4637.0
1.5940.5
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
FHFLCTQ201 -8GFHFLCTQ201 -12mmGFHFLCTQ202 -9GFHFLCTQ202 -10GFHFLCTQ202 -15mmGFHFLCTQ203 -11GFHFLCTQ203 -17mmGFHFLCTQ204 -12GFHFLCTQ204 -20mmGFHFLCTQ205 -13GFHFLCTQ205 -14GFHFLCTQ205 -15GFHFLCTQ205 -16GFHFLCTQ205 -25mmGFHFLCTQ206 -17GFHFLCTQ206 -18GFHFLCTQ206 -19GFHFLCTQ206 -20GFHFLCTQ206 -30mmGFHFLCTQ207 -20GFHFLCTQ207 -21GFHFLCTQ207 -22GFHFLCTQ207 -23GFHFLCTQ207 -35mmG
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
1/4
5/16
5/16
3/8
3/8
BoltSizeIn.
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
0.9323.5
1.0225.8
1.1128.2
1.2331.3
1.3233.6
1/4
5/16
5/16
3/8
3/8
37/6414.7
43/6417.1
11/1617.5
13/1620.6
7/822.2
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
9/327.1
3/89.5
3/89.5
7/1611.1
7/1611.1
3 3/1681.0
3 9/1690.5
3 3/495.3
4 7/16112.7
4 15/16125.4
19/647.5
21/648.3
11/328.7
13/3210.3
7/1611.1
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
FLCTQ-203-H
FLCTQ-204-H
FLCTQ-205-H
FLCTQ-206-H
FLCTQ-207-H
ShaftDiam. a e b S1
Square g i Z Bi Bearing No.
2 5/1658.7
2 5/866.7
2 51/6471.0
3 5/1684.1
3 11/1693.7
FHSFLCTQ201 -8GFHSFLCTQ201 -12mmGFHSFLCTQ202 -9GFHSFLCTQ202 -10GFHSFLCTQ202 -15mmGFHSFLCTQ203 -11GFHSFLCTQ203 -17mmGFHSFLCTQ204 -12GFHSFLCTQ204 -13GFHSFLCTQ204 -20mmGFHSFLCTQ205 -12GFHSFLCTQ205 -13GFHSFLCTQ205 -14GFHSFLCTQ205 -15GFHSFLCTQ205 -16GFHSFLCTQ205 -25mmGFHSFLCTQ206 -17GFHSFLCTQ206 -18GFHSFLCTQ206 -19GFHSFLCTQ206 -20GFHSFLCTQ206 -30mmGFHSFLCTQ207 -20GFHSFLCTQ207 -21GFHSFLCTQ207 -22GFHSFLCTQ207 -23GFHSFLCTQ207 -35mmG
Unit No.BoltSizeIn.
HousingNo.
inmmDimensions
n
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHSFLCTQ200-G Set Screw Locking
FHFLCTQ200-G Eccentric Locking Collar
RST-Seal
DBL-Seal
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
70
n Standard duty, high strength ductile ironn Narrow inner ring bearingn Relubricatable unit (shown) n Non-relubricatable unit available
(omit “G” from unit part number)n Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Ductile 2 BoltFHSFX200-G / FHFX200-G Series
For reverse mounting, add suffix “REV” after unit number Example: FHSFX205-16G-REV
1/4
5/16
5/16
3/8
3/8
inmmDimensions
Unit No. ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.Unit No. ShaftDiam.
BoltSizeIn.
Bearing No. Housing No.
inmmDimensions
3/89.5
7/1611.1
7/1611.1
15/3211.9
1/212.7
3 3/1681.0
3 9/1690.5
3 3/495.3
4 7/16112.7
4 13/16122.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
.3589.10
.43711.10
.43711.10
.47612.10
.50012.7
5/167.9
11/328.7
25/649.9
27/6410.7
7/1611.1
9/327.1
11/328.7
11/328.7
13/3210.3
13/3210.3
1 15/1649.21
2 1/457.2
2 1/263.5
3 3/3278.6
3 1/384.7
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -20mmGFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmG
FX-203-H
FX-204-H
FX-205-H
FX-206-H
FX-207-H
ShaftDiam. a e i g l s b Z L n
BoltSizeIn.
Bearing No. HousingNo.
1/4
5/16
5/16
3/8
3/8
1.2331.2
1.3634.6
1.3634.6
1.5338.8
1.6642.1
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
FHFX201 -8GFHFX201 -12mmGFHFX202 -9GFHFX202 -10GFHFX202 -15mmGFHFX203 -11GFHFX203 -17mmGFHFX204 -12GFHFX204 -20mmGFHFX205 -13GFHFX205 -14GFHFX205 -15GFHFX205 -16GFHFX205 -25mmGFHFX206 -17GFHFX206 -18GFHFX206 -19GFHFX206 -20GFHFX206 -30mmGFHFX207 -20GFHFX207 -21GFHFX207 -22GFHFX207 -23GFHFX207 -35mmG
W
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FHSFX201 -8GFHSFX201 -12mmGFHSFX202 -9GFHSFX202 -10GFHSFX202 -15mmGFHSFX203 -11GFHSFX203 -17mmGFHSFX204 -12GFHSFX204 -13GFHSFX204 -20mmGFHSFX205 -12GFHSFX205 -13GFHSFX205 -14GFHSFX205 -15GFHSFX205 -16GFHSFX205 -25mmGFHSFX206 -17GFHSFX206 -18GFHSFX206 -19GFHSFX206 -20GFHSFX206 -30mmGFHSFX207 -20GFHSFX207 -21GFHSFX207 -22GFHSFX207 -23GFHSFX207 -35mmG
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
3 3/1681.0
3 9/1690.5
3 3/495.3
4 7/16112.7
4 13/16122.2
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
3 15/16100.0
.3589.10
.43711.10
.43711.10
.47612.10
.50012.7
3/89.5
7/1611.1
7/1611.1
15/3211.9
1/212.7
5/167.9
11/328.7
25/649.9
27/6410.7
7/1611.1
9/327.1
11/328.7
11/328.7
13/3210.3
13/3210.3
1 15/1649.21
2 1/457.2
2 1/263.5
3 3/3278.6
3 1/384.7
0.9925.1
1.1328.6
1.2030.6
1.3033.1
1.3935.2
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmG
FX-203-H
FX-204-H
FX-205-H
FX-206-H
FX-207-H
FHSFX200-G Set Screw Locking
FHFX200-G Eccentric Locking Collar
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Pressed Steel 2 BoltFHSPFLZ200 / FHPFLZ200 Series
n Two light duty, self-aligning pressed steel housings
n Zinc plated stamped steel (shown)n Non-plated, raw stamped steel available
(FHSPFLR/FHPFLR Series)n Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
71
Sta
ndard
Mounte
d U
nits
inmmDimensions
9/1614
5/816
11/1617
11/1617
7/822
3 3/1681
3 9/1690
3 3/495
4 7/16113
4 15/16125
.0651.7
.0832.1
.0832.1
.1042.6
.1042.6
9/327
11/329
11/329
13/3210
13/3210
2 15/1659
2 5/867
2 51/6471
3 5/1684
3 11/1694
1 15/1649
2 3/1656
2 3/860
2 13/1671
3 3/1681
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mmFHS207 -20FHS207 -21FHS207 -22FHS207 -23FHS207 -35mm
PFL-3Z
PFL-4Z
PFL-5Z
PFL-6Z
PFL-7Z
1/4
5/16
5/16
3/8
3/8
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
inmmDimensions
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e g c s b f Bi n
BoltSizeIn.
Bearing No. HousingNo.
FHSPFLZ201 -8FHSPFLZ201 -12mmFHSPFLZ202 -9FHSPFLZ202 -10FHSPFLZ202 -15mmFHSPFLZ203 -11FHSPFLZ203 -17mmFHSPFLZ204 -12FHSPFLZ204 -13FHSPFLZ204 -20mmFHSPFLZ205 -12FHSPFLZ205 -13FHSPFLZ205 -14FHSPFLZ205 -15FHSPFLZ205 -16FHSPFLZ205 -25mmFHSPFLZ206 -17FHSPFLZ206 -18FHSPFLZ206 -19FHSPFLZ206 -20FHSPFLZ206 -30mmFHSPFLZ207 -20FHSPFLZ207 -21FHSPFLZ207 -22FHSPFLZ207 -23FHSPFLZ207 -35mm
Unit No. ShaftDiam.
inmmDimensions
9/1614
5/816
11/1617
11/1617
7/822
3 3/1681
3 9/1690
3 3/495
4 7/16113
4 15/16125
.0651.7
.0832.1
.0832.1
.1042.6
.1042.6
9/327
11/329
11/329
13/3210
13/3210
2 15/1659
2 5/867
2 51/6471
3 5/1684
3 11/1694
1 15/1649
2 3/1656
2 3/860
2 13/1671
3 3/1681
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.3749.50
1.1328.60
1.2632.00
1.5038.10
1.7544.50
2.1955.60
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mmFH207 -20FH207 -21FH207 -22FH207 -23FH207 -35mm
PFL-3Z
PFL-4Z
PFL-5Z
PFL-6Z
PFL-7Z
1/4
5/16
5/16
3/8
3/8
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.53138.90
2 1/264
2 13/1671
376
3 9/1690
3 15/16100
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No. ShaftDiam. a e g c s b f L n W Bearing No. Housing
No.FHPFLZ201 -8FHPFLZ201 -12mmFHPFLZ202 -9FHPFLZ202 -10FHPFLZ202 -15mmFHPFLZ203 -11FHPFLZ203 -17mmFHPFLZ204 -12FHPFLZ204 -20mmFHPFLZ205 -13FHPFLZ205 -14FHPFLZ205 -15FHPFLZ205 -16FHPFLZ205 -25mmFHPFLZ206 -17FHPFLZ206 -18FHPFLZ206 -19FHPFLZ206 -20FHPFLZ206 -30mmFHPFLZ207 -20FHPFLZ207 -21FHPFLZ207 -22FHPFLZ207 -23FHPFLZ207 -35mm
ShaftDiam.
BoltSizeIn.
Dimensions inmm
Stamped housings can be made in AISI 304 stainless steel. Combine with stainless steel bearing for maximum corrosion resistance:Example: SSFHSPFL205-16
FHSPFLZ2OO Set Screw Locking
FHPFLZ200 Eccentric Locking Collar
RST-Seal
DBL-Seal
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
72
n One piece, light duty pressedsteel housing
n Conductive rubber bearing liner reducesnoise/vibration and static electricity
n Flush mount style ideal in tightmounting areas
n Zinc plated stamped steeln Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units–Rubber Insulated Pressed Steel 2 BoltFHSR200-4X700 / FHR200-4X700 Series
5/816
3/419
3/419
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mm
.7519
.7519
.7519
376
3 3/886
3 3/886
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm
Unit No.
.39110
.45111
.45111
4102
4 1/2114
4 1/2114
.06252
.06252
.06252
PFL-4X728Z
PFL-4X730Z
PFL-4X730Z
RUBBER-4X728
RUBBER-4X729
RUBBER-4X730
ShaftDiam. a e b s1 s2 g l Rubber
Insulator No.
251
2 1/264
2 1/264
FHSR201 -8-4X728FHSR201 -12m-4X728FHSR202 -9-4X728FHSR202 -10-4X728FHSR202 -15m-4X728FHSR203 -11-4X728FHSR203 -17m-4X728FHSR204 -12-4X729FHSR204 13-4X729FHSR204 -20m-4X729FHSR205 -12-4X730FHSR205 -13-4X730FHSR205 -14-4X730FHSR205 -15-4X730FHSR205 -16-4X730FHSR205 -25m-4X730
Unit No. Bearing No. HousingNo.
inmmDimensions
FHSR200-4X700 Set Screw Locking
FHR200-4X700 Series Eccentric Locking Collar
5/816
3/419
3/419
FHR201 -8FHR201 -12mmFHR202 -9FHR202 -10FHR202 -15mmFHR203 -11FHR203 -17mmFHR204 -12FHR204 -20mmFHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mm
.7519
.7519
.7519
376
3 3/886
3 3/886
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm
Unit No.
.39110
.45111
.45111
4102
4 1/2114
4 1/2114
.06252
.06252
.06252
PFL-4X728Z
PFL-4X730Z
PFL-4X730Z
RUBBER-4X728
RUBBER-4X729
RUBBER-4X730
ShaftDiam. a e b s1 s2 g l Rubber
Insulator No.
251
2 1/264
2 1/264
FHR201 -8-4X728FHR201 -12m-4X728FHR202 -9-4X728FHR202 -10-4X728FHR202 -15m-4X728FHR203 -11-4X728FHR203 -17m-4X728FHR204 -12-4X729FHR204 -20m-4X729FHR205 -13-4X730FHR205 -14-4X730FHR205 -15-4X730FHR205 -16-4X730FHR205 -25m-4X730
Unit No. Bearing No. HousingNo.
inmmDimensions
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Flange Units – Pressed Steel 2 BoltFHSR200-2FM / FHSR200-2NCFM Series
n One piece, light duty pressedsteel housing
n Flush mount style ideal in tight mounting areas
n Zinc plated stamped steeln Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
73
Sta
ndard
Mounte
d U
nits
inmmDimensions
.0741.88
.0741.9
.0741.9
.0892.3
3 3/1680.96
3 9/1690.5
3 3/495.3
4 7/16112.7
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm
Unit No.
2 5/1658.74
2 5/866.7
2 51/6471.0
3 1/482.6
9/327.14
11/328.7
11/328.7
13/3210.3
.59115.0
.59115.0
.68217.3
.70918.0
0.9624.38
1.0626.90
1.1428.90
1.2732.30
.1724.38
.2265.7
.19224.9
.27797.1
.1975.0
.1774.5
.19685.0
.2857.24
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mmFHSR206 -17FHSR206 -18FHSR206 -19FHSR206 -20FHSR206 -30mm
PFL-3Z-FM
PFL-4Z-FM
PFL-5Z-FM
PFL-6Z-FM
ShaftDiam. a e b g s l Z Bi G1 G
BoltSizeIn.
Bearing No. HousingNo.
1/4
5/16
5/16
3/8
0.8922.50
0.9825.00
1.0627.00
1.1830.00
2 1/263.5
2 13/1671.4
376.2
3 9/1690.5
FHSR201 -8-2FMFHSR201 -12mm-2FMFHSR202 -9-2FMFHSR202 -10-2FMFHSR202 -15mm-2FMFHSR203 -11-2FMFHSR203 -17mm-2FMFHSR204 -12-2FMFHSR204 -13-2FMFHSR204 -20mm-2FMFHSR205 -12-2FMFHSR205 -13-2FMFHSR205 -14-2FMFHSR205 -15-2FMFHSR205 -16-2FMFHSR205 -25mm-2FMFHSR206 -17-2FMFHSR206 -18-2FMFHSR206 -19-2FMFHSR206 -20-2FMFHSR206 -30mm-2FM
f
1.574840.0
1.850447.0
2.047252.0
2.440962.0
FHSR200-2FM Set Screw Locking
Unit also available in FHR locking collar style bearing: Example FHR205-16-2FM or FHR205-16-2NCFM
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Outer Ring
Inner Ring Inner Ring
Outer Ring
Inner Ring Inner Ring
Full cover metal shroud
inmmDimensions
.0621.6
4 1/8104.8
3/413/16
7/815/16
125mm
Unit No.
2 1/457.2
7/1611.1
.66116.8
1.1328.60
.21324.9
.19685.0
FHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mm
PFL-5Z-NCFM
ShaftDiam. a e b g s l Z Bi G1 G
BoltSizeIn.
Bearing No. HousingNo.
3/81.0627.00
3 1/482.6
FHSR205 -12-2NCFMFHSR205 -13-2NCFMFHSR205 -14-2NCFMFHSR205 -15-2NCFMFHSR205 -16-2NCFMFHSR205 -25m-2NCFM
f
2.047252.0
FHSR200-2NCFM Set Screw Locking
n One piece, light duty pressed steel housingn RSCM conductive rubber liner reduces
noise/vibrationn Flush mount style ideal in tight
mounting areasn Zinc plated stamped steeln Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Flange Units – Rubber Insulated Pressed Steel 2 BoltRCSMRFZ-S / RCSMRFZ-L Series
74
inmmDimensions
2 45/6469
2 45/6469
2 45/6469
3 1/289
4 1/2114
4 1/2114
4 1/2114
5 3/8137
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm
Unit No.
2 41/6467
2 41/6467
2 41/6467
3 1/483
.0832.1
.0832.1
.0832.1
.0832.1
17/3213
17/3213
17/3213
41/6416
1 1/1627
1 1/1627
1 1/1627
1 1/432
1.1429.00
1.2030.50
1.2832.50
1.4637.00
0.88622.50
0.98425.00
1.06327.00
1.18130.00
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mmFHSR206 -17FHSR206 -18FHSR206 -19FHSR206 -20FHSR206 -30mm
RF-5Z
RF-5Z
RF-5Z
RF-6Z
ShaftDiam. a e b1 b g i l s Z Bi
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
7/16
7/1611
7/1611
7/1611
1/213
3 5/892
3 5/892
3 5/892
4 3/8111
RCSMRFZ -8SRCSMRFZ -12mmSRCSMRFZ -9SRCSMRFZ -10SRCSMRFZ -15mmSRCSMRFZ -11SRCSMRFZ -17mmSRCSMRFZ -12SRCSMRFZ -13SRCSMRFZ -20mmSRCSMRFZ -12SRCSMRFZ -13SRCSMRFZ -14SRCSMRFZ -15SRCSMRFZ -16SRCSMRFZ -25mmSRCSMRFZ -17SRCSMRFZ -18SRCSMRFZ -19SRCSMRFZ -20SRCSMRFZ -30mmS
n
0.2566.50
0.2957.50
0.2957.50
0.3549.00
inmmDimensions
2 45/6469
2 45/6469
2 45/6469
3 1/289
2 45/6469
4 1/2114
4 1/2114
4 1/2114
5 3/8137
4 1/2114
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/161 1/81 3/161 1/4
Unit No.
2 41/6467
2 41/6467
2 41/6467
3 1/483
2 41/6467
.0832.1
.0832.1
.0832.1
.0832.1
.0832.1
17/3213
17/3213
17/3213
41/6416
17/321.3
1 1/1627
1 1/1627
1 1/1627
1 1/432
1 1/1627
1.3835.10
1.4436.50
1.4436.50
1.6842.70
0.8321.00
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.03126.20
FHR201 -8FHR201 -12mmFHR202 -9FHR202 -10FHR202 -15mmFHR203 -11FHR203 -17mmFHR204 -12FHR204 -20mmFHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mmFHR206 -17FHR206 -18FHR206 -19FHR206 -20FHR206 -30mmFHRL6006 -17FHRL6006 -18FHRL6006 -19FHRL6006 -20
RCSM-10
RCSM-12
RCSM-16
RCSM-19
LRCSM-19
ShaftDiam. a e b1 b g i l s Z L
BoltSizeIn.
Bearing No. HousingNo.
3/8
3/8
3/8
7/16
3/8
7/1611
7/1611
7/1611
1/213
7/1611
3 5/892
3 5/892
3 5/892
4 3/8111
3 5/892
RCSMRFZ -8LRCSMRFZ -12mmLRCSMRFZ -9LRCSMRFZ -10LRCSMRFZ -15mmLRCSMRFZ -11LRCSMRFZ -17mmLRCSMRFZ -12LRCSMRFZ -20mmLRCSMRFZ -13LRCSMRFZ -14LRCSMRFZ -15LRCSMRFZ -16LRCSMRFZ -25mmLRCSMRFZ -17LRCSMRFZ -18LRCSMRFZ -19LRCSMRFZ -20LRCSMRFZ -30mmLLRCSMRFZ -17LLRCSMRFZ -18LLRCSMRFZ -19LLRCSMRFZ -20L
n
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.2566.50
RF-5Z
RF-5Z
RF-5Z
RF-6Z
RF-5Z
RubberInsulator
No.
RubberInsulator
No.
RCSM-10
RCSM-12
RCSM-16
RCSM-19
RCSMRFZ-S Set Screw Locking
RCSMRFZ-L Eccentric Locking Collar
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Rubber Interliner & Rubber Cartridge UnitsFHSBR200 / FHBR200 & LCR/LRCR/RCR Series
n Conductive rubber interlinern Used to dissipate static and reduce
noise/vibrationn FHSBR/ FHBR commonly assembled in
pressed steel housingsn LCR/LRCR/RCR are cylindrically formed
and used in many HVAC applicationsn Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
75
Sta
ndard
Mounte
d U
nits
a f l Bi n m RubberInsulator No.
Unit No. ShaftDiam. Bearing No.
inmmDimensions
a f l L n m Bearing No.
inmmDimensions
FHSBR Set Screw Locking
FHSBR201 -8FHSBR201 -12mmFHSBR202 -9FHSBR202 -10FHSBR202 -15mmFHSBR203 -11FHSBR203 -17mmFHSBR204 -12FHSBR204 -13FHSBR204 -20mmFHSBR205 -12FHSBR205 -13FHSBR205 -14FHSBR205 -15FHSBR205 -16FHSBR205 -25mmFHSBR206 -17FHSBR206 -18FHSBR206 -19FHSBR206 -20FHSBR206 -30mm
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm
1.86547.37
2.06252.37
2.45662.38
2.84872.34
1 3/834.9
1 5/841.3
1 27/3246.8
2.43661.9
11/1617.5
11/1617.5
13/1620.6
27/3221.4
0.88622.50
0.98425.00
1.06327.00
1.18130.00
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.6316.00
0.6917.50
0.7719.50
0.8321.00
FHS201 -8FHS201 -12mmFHS202 -9FHS202 -10FHS202 -15mmFHS203 -11FHS203 -17mmFHS204 -12FHS204 -13FHS204 -20mmFHS205 -12FHS205 -13FHS205 -14FHS205 -15FHS205 -16FHS205 -25mmFHS206 -17FHS206 -18FHS206 -19FHS206 -20FHS206 -30mm
RUBBER-4
RUBBER-5
RUBBER-6
RUBBER-7
FHBR Eccentric Locking Collar
FHBR201 -8FHBR201 -12mmFHBR202 -9FHBR202 -10FHBR202 -15mmFHBR203 -11FHBR203 -17mmFHBR204 -12FHBR204 -20mmFHBR205 -13FHBR205 -14FHBR205 -15FHBR205 -16FHBR205 -25mmFHBR206 -17FHBR206 -18FHBR206 -19FHBR206 -20FHBR206 -30mm
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm
1.86547.37
2.06252.37
2.45662.38
2.84872.34
1 3/834.9
1 5/841.3
1 27/3246.8
2.43661.9
11/1617.5
11/1617.5
13/1620.6
27/3221.4
1.12628.60
1.22031.00
1.22031.00
1.40635.70
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.4912.55
0.5513.91
0.5514.00
0.5814.82
FH201 -8FH201 -12mmFH202 -9FH202 -10FH202 -15mmFH203 -11FH203 -17mmFH204 -12FH204 -20mmFH205 -13FH205 -14FH205 -15FH205 -16FH205 -25mmFH206 -17FH206 -18FH206 -19FH206 -20FH206 -30mm
RUBBER-4
RUBBER-5
RUBBER-6
RUBBER-7
1.85047.0
1.37534.9
2.0050.8
a a1 a2 f l L RubberInsulator No.Unit No. Shaft
Diam. Bearing No.
inmmDimensions
n
LCR -13LLCR -14LLCR -15LLCR -16L
LRCR -12L
RCR -13LRCR -14LRCR -15LRCR -16LRCR -25mml
13/167/8
15/161
3/413/16
7/815/16
125mm
3.4487.38
1.812546.04
2.25057.15
3.2281.8
3.2883.3
.99025.1
.718018.2
.781319.8
1.0025.40
0.9724.60
1.2231.00
FHRL6005 -13FHRL6005 -14FHRL6005 -15FHRL6005 -16
FHRL6004 -12
FHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mm
0.2366.00
0.2366.00
0.2957.50
LCR-16
LRCR-12
RCR-16
Unit No. ShaftDiam.
RubberInsulator No.
LRC/LRCR/RCR Eccentric Locking Collar
RST-Seal R-Seal
DBL-Seal Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
FHSBR200 FHBR200 RCR - LRCR LCR
76
n Cylindrical cartridge interliner madeof conductive rubber
n Used to dissipate static and reducenoise/vibration
n Used in many fan, blower and otherHVAC applications
n Narrow inner ring bearingn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Rubber Cartridge Units Narrow Inner Ring BearingRCSM-S / RCSM-L & LRCSM-L Series
Diameter 'a' ±.005"
Diameter 'a' ±.005"
Diameter 'a' ±.005"
Diameter 'a' ±.005"
Unit No. ShaftDiam. a f l Bi n m Rubber Insert
No.Unit No. ShaftDiam. Bearing No.Recommended
Housing Fit
inmmDimensions
0.2566.50
0.2957.50
0.2957.50
0.3549.00
1 3/835.00
1.58040.10
1.81146.00
1 7/847.6
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm
0.88622.50
0.98425.00
1.06327.00
1.18130.00
2 17/3264.29
2 17/3264.29
2 17/3264.29
3 3/3278.58
0.6316.00
0.6917.50
0.7719.50
0.8321.00
RCSM-10
RCSM-12
RCSM-16
RCSM-19
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mmFHSR206 -17FHSR206 -18FHSR206 -19FHSR206 -20FHSR206 -30mm
125.4
125.4
125.4
1 3/1630.2
RCSM -8SRCSM -12mmSRCSM -9SRCSM -10SRCSM -15mmSRCSM -11SRCSM -17mmSRCSM -12SRCSM -13SRCSM -20mmSRCSM -12SRCSM -13SRCSM -14SRCSM -15SRCSM -16SRCSM -25mmSRCSM -17SRCSM -18SRCSM -19SRCSM -20SRCSM -30mmS
Diameter'a' ±.005"
Diameter'a' ±.005"
Diameter'a' ±.005"
Diameter'a' ±.005"
Diameter'a' ±.005"
0.2566.50
0.2957.50
0.2957.50
0.3549.00
0.2566.50
1 3/835.00
1.58040.10
1.81146.00
1 7/847.6
1 7/847.6
1/212mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/161 1/8
1 3/161 1/4
Unit No.
1.12628.60
1.22031.00
1.22031.00
1.40635.70
1.03126.20
2 17/3264.29
2 17/3264.29
2 17/3264.29
3 3/3278.58
2 17/3264.29
0.4912.55
0.5513.91
0.5514.00
0.5814.82
0.4611.80
RCSM-10
RCSM-12
RCSM-16
RCSM-19
LRCSM-19
FHR201 -8FHR201 -12mmFHR202 -9FHR202 -10FHR202 -15mmFHR203 -11FHR203 -17mmFHR204 -12FHR204 -20mmFHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mmFHR206 -17FHR206 -18FHR206 -19FHR206 -20FHR206 -30mmFHRL6006 -17FHRL6006 -18FHRL6006 -19FHRL6006 -20
ShaftDiam. a f l L n m Rubber Insert
No.
125.4
125.4
125.4
1 3/1630.2
125.4
Unit No. ShaftDiam. Bearing No.Recommended
Housing Fit
inmmDimensions
RCSM -8LRCSM -12mmLRCSM -9LRCSM -10LRCSM -15mmLRCSM -11LRCSM -17mmLRCSM -12LRCSM -20mmLRCSM -13LRCSM -14LRCSM -15LRCSM -16LRCSM -25mmLRCSM -17LRCSM -18LRCSM -19LRCSM -20LRCSM -30mmLLRCSM -17LLRCSM -18LLRCSM -19LLRCSM -20L
RCSM-L/LRCSM-L Eccentric Locking Collar
RCSM-S Set Screw Locking
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Rubber Cartridge Units Wide Inner Ring BearingRCSM-UCR / RCSM-GRR Series
n Cylindrical cartridge interliner made ofconductive rubber
n Used to dissipate static and reducenoise/vibration
n Used in many fan, blower and otherHVAC applications
n Wide inner ring bearing for increasedshaft support
n Bearings have black oxide plated inner and outer rings
n Standard seal: RST tight riding,full cover, metal shroud seals
Optional seals: See page 85
77
Sta
ndard
Mounte
d U
nits
Unit No. ShaftDiam. a f l Bi n m Rubber Insert
No.Unit No. ShaftDiam. Bearing No.Recommended
Housing Fit
inmmDimensions
Diameter'a' ±.005"
Diameter'a' ±.005"Diameter'a' ±.005"
Diameter'a' ±.005"
Diameter 'a' ±.005"
0.39410.000.50012.700.50012.70
0.56314.30
0.62615.90
1 3/835.001.58040.101.58040.10
1.81146.00
1 7/847.6
1/25/81/25/83/4
20mm7/8
15/161
25mm
1 1/161 1/8
1 3/161 1/4(s)30mm
1.02426.001.22031.001.22031.00
1.33934.00
1.50038.10
2 17/3264.29
2 17/3264.29
2 17/3264.29
2 17/3264.29
3 3/3278.58
0.6316.000.7218.300.7218.30
0.7819.70
0.8722.20
RCSM-10
RCSM-12
RCSM-12
RCSM-16
RCSM-19
UCSR201 -8UCSR202 -10UCR201 -8UCR202 -10UCR204 -12UCR204 -20mmUCR205 -14UCR205 -15UCR205 -16UCR205 -25mmUCR206 -17UCR206 -18UCR206 -19UCR206 -20UCR206 -30mm
125.4
125.4
125.4
125.4
1 3/1630.2
RCSM -8UCSRRCSM -10UCSRRCSM -8UCRRCSM -10UCRRCSM -12UCRRCSM -20mm-UCRRCSM -14UCRRCSM -15UCRRCSM -16UCRRCSM -25mm-UCRRCSM -17UCRRCSM -18UCRRCSM -19UCRRCSM -20SUCRRCSM -30mm-UCR
Unit No. ShaftDiam. a f l Bi n m Rubber Insert
No.Unit No. ShaftDiam. Bearing No.Recommended
Housing Fit
inmmDimensions
Diameter 'a' ±.005"Diameter'a' ±.005"
Diameter'a' ±.005"
Diameter'a' ±.005"
0.50012.700.50012.70
0.56314.30
0.62615.90
1.58040.101.58040.10
1.81146.00
1 7/847.6
1/25/83/4
20mm7/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm
1.22031.001.22031.00
1.35834.50
1.50038.10
2 17/3264.29
2 17/3264.29
2 17/3264.29
3 3/3278.58
0.7218.300.7218.30
0.8020.20
0.8722.20
RCSM-12
RCSM-12
RCSM-16
RCSM-19
GRR201 -8GRR202 -10GRR204 -12GRR204 -20mmGRR205 -14GRR205 -15GRR205 -16GRR205 -25mmGRR206 -17GRR206 -18GRR206 -19GRR206 -20GRR206 -30mm
125.4
125.4
125.4
1 3/1630.2
RCSM -8GRRRCSM -10GRRRCSM -12GRRRCSM -20mm-GRRRCSM -14GRRRCSM -15GRRRCSM -16GRRRCSM -25mm-GRRRCSM -17GRRRCSM -18GRRRCSM -19GRRRCSM -20GRRRCSM -30mm-GRR
RCSM-GRR GRIP-IT 360 Degree Locking
RCSM-UCR Set Screw Locking
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
78
n Standard duty, high-grade cast ironn Slot width must be specified when orderingn Wide inner ring bearingn Relubricatable unit with anti-
rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Take Up UnitsUCT200 Series Set Screw Locking
1. T series housings can also be combined with the following insert bearings: HC, FH, FHS or GR: Example HCT205-16-17/32 or FHT205-16-17/32 2. Slot width (‘K’ dimension ) can be made to your specification upon request. See page 129 for suggested options. 3. Specify slot width when ordering the complete unit: Example UCT205-17-17/32 4. Specify slot width when ordering the housing only: Example: T-205-H-17/32
inmmDimensions
1 1/431.8
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
2 17/3264.3
2 17/3264.3
2 3/469.9
2 3/469.9
2 3/469.9
2 3/469.9
5/815.9
5/815.9
5/815.9
5/815.9
5/815.9
3/419.1
3/419.1
3/419.1
125.4
1 1/431.8
1 1/431.8
1 1/431.8
1 1/431.8
1 1/431.8
Unit No.
250.8
250.8
250.8
2 7/3256.4
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 9/3283.3
4 1/32102.4
4 1/32102.4
4 3/8111.1
4 3/8111.1
4 3/8111.1
4 3/8111.1
3/419.1
3/419.1
3/419.1
55/6421.8
55/6421.8
1 9/6429.0
1 9/6429.0
1 9/6429.0
1 3/834.9
1 3/834.9
1 39/6440.9
1 39/6440.9
1 39/6440.9
1 39/6440.9
250.8
250.8
250.8
2 1/457.2
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 3/885.7
3 3/495.3
4 1/32102.4
4 3/4120.7
4 3/4120.7
4 3/4120.7
4 3/4120.7
17/3213.5
17/3213.5
17/3213.5
17/3213.5
17/3213.5
11/1617.5
11/1617.5
11/1617.5
.86622.0
.86622.0
17/1627.0
17/1627.0
17/1627.0
17/1627.0
3 1/288.9
3 1/288.9
3 1/288.9
4 1/32102.4
4 1/32102.4
4 1/2114.3
4 19/32116.7
4 19/32116.7
5 3/4146.1
5 3/4146.1
6 9/16166.7
6 9/16166.7
6 9/16166.7
7 1/4184.2
3 23/3294.4
3 23/3294.4
3 13/1696.8
4 7/16112.8
5 1/16128.8
5 11/16144.5
5 11/16144.5
5 27/32148.4
6 3/4171.5
7 5/8193.7
8 27/32224.6
8 27/32224.6
9 1/8231.8
9 1/4235.0
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mm
T-204-H
T-204-H
T-205-H
T-206-H
T-207-H
T-208-H
T-209-H
T-210-H
T-211-H
T-212-H
T-213-H
T-214-H
T-215-H
T-216-H
ShaftDiam. o g p q s b K e a w n Housing
No.Bearing
No.
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1.31133.30
376.2
376.2
376.2
3 1/288.9
3 1/288.9
4 1/64102.0
4 1/64102.0
4 1/64102.0
5 1/8130.2
5 1/8130.2
5 15/16150.8
5 15/16150.8
5 15/16150.8
6 1/2165.1
13/3210.3
13/3210.3
13/3210.3
13/3210.3
1/212.7
5/815.9
5/815.9
5/815.9
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
13/1620.6
j
1 1/431.8
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
2 17/3264.3
2 17/3264.3
2 3/469.9
2 3/469.9
2 3/469.9
2 3/469.9
l
13/1620.6
13/1620.6
15/1623.8
1 3/3227.8
1 3/1630.2
1 5/1633.3
1 3/834.9
1 15/3237.3
1 1/238.1
1 21/3242.1
1 23/3243.7
1 13/1646.0
1 7/847.6
250.8
1 5/1633.3
1 5/1633.3
1 3/834.9
1 11/1642.9
251.0
2 27/3256.4
2 1/457.2
2 5/1658.7
2 9/1665.1
2 15/1674.6
3 7/1687.3
3 7/1687.3
3 5/892.1
3 3/495.3
r h Bi
2 13/3261.1
2 13/3261.1
2 7/1661.9
2 3/469.9
3 1/1677.8
3 15/3288.1
3 7/1687.3
3 17/3289.7
4 3/16106.4
4 11/16119.1
5 13/32137.3
5 13/32137.3
5 1/2139.7
5 1/2139.7
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
1/212mm9/165/8
15mm11/16
17mmm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm
UCT201 -8UCT201 -12mmUCT202 -9UCT202 -10UCT202 -15mmUCT203 -11UCT203 -17mmUCT204 -12UCT204 -13UCT204 -20mmUCT205 -13UCT205 -14UCT205 -15UCT205 -16UCT205 -25mmUCT206 -17UCT206 -18UCT206 -19UCT206 -20UCT206 -30mmUCT207 -20UCT207 -21UCT207 -22UCT207 -23UCT207 -35mmUCT208 -24UCT208 -25UCT208 -40mmUCT209 -26UCT209 -27UCT209 -28UCT209 -45mmUCT210 -29UCT210 -30UCT210 -31UCT210 -32UCT210 -50mmUCT211 -32UCT211 -33UCT211 -34UCT211 -35UCT211 -55mmUCT212 -36UCT212 -37UCT212 -38UCT212 -39UCT212 -60mmUCT213 -40UCT213 -41UCT213 -65mmUCT214 -42UCT214 -43UCT214 -44UCT214 -70mmUCT215 -45UCT215 -46UCT215 -47UCT215 -48UCT215 -75mmUCT216 -50UCT216 -80mm
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
Take Up UnitsGRT200 Series GRIP-IT 360 Degree Locking
Sta
ndard
Mounte
d U
nits
79
n Standard duty, high-grade cast ironn Slot width must be specified when orderingn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
1. Slot width (‘K’ dimension ) can be made to your specification upon request. See page 129 for suggested options. 2. Specify slot width when ordering the complete unit: Example: GRT205-17-17/323. Specify slot width when ordering the housing only: Example: T-205-H-17/32
inmmDimensions
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
2 17/3264.3
2 17/3264.3
2 3/469.9
2 3/469.9
2 3/469.9
5/815.9
5/815.9
5/815.9
5/815.9
3/419.1
3/419.1
3/419.1
125.4
1 1/431.8
1 1/431.8
1 1/431.8
1 1/431.8
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
250.8
250.8
2 7/3256.4
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 9/3283.3
4 1/32102.4
4 1/32102.4
4 3/8111.1
4 3/8111.1
4 3/8111.1
3/419.1
3/419.1
55/6421.8
55/6421.8
1 9/6429.0
1 9/6429.0
1 9/6429.0
1 3/834.9
1 3/834.9
1 39/6440.9
1 39/6440.9
1 39/6440.9
250.8
250.8
2 1/457.2
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 3/885.7
3 3/495.3
4 1/32102.4
4 3/4120.7
4 3/4120.7
4 3/4120.7
17/3213.5
17/3213.5
17/3213.5
17/3213.5
11/1617.5
11/1617.5
11/1617.5
.86622.0
.86622.0
17/1627.0
17/1627.0
17/1627.0
3 1/288.9
3 1/288.9
4 1/32102.4
4 1/32102.4
4 1/2114.3
4 19/32116.7
4 19/32116.7
5 3/4146.1
5 3/4146.1
6 9/16166.7
6 9/16166.7
6 9/16166.7
3 23/3294.4
3 13/1696.8
4 7/16112.8
5 1/16128.8
5 11/16144.5
5 11/16144.5
5 27/32148.4
6 3/4171.5
7 5/8193.7
8 27/32224.6
8 27/32224.6
9 1/8231.8
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -45GR215 -46GR215 -47GR215 -48GR215 -75mm
T-204-H
T-205-H
T-206-H
T-207-H
T-208-H
T-209-H
T-210-H
T-211-H
T-212-H
T-213-H
T-214-H
T-215-H
ShaftDiam. o g p q s b e a w j Bearing
No.Housing
No.
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3.3986.00
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
376.2
376.2
3 1/288.9
3 1/288.9
4 1/64102.0
4 1/64102.0
4 1/64102.0
5 1/8130.2
5 1/8130.2
5 15/16150.8
5 15/16150.8
5 15/16150.8
13/3210.3
13/3210.3
13/3210.3
1/212.7
5/815.9
5/815.9
5/815.9
3/419.1
3/419.1
13/1620.6
13/1620.6
13/1620.6
GRT204 -12GRT204 -13GRT204 -20mmGRT205 -13GRT205 -14GRT205 -15GRT205 -16GRT205 -25mmGRT206 -17GRT206 -18GRT206 -19GRT206 -20GRT206 -30mmGRT207 -20GRT207 -21GRT207 -22GRT207 -23GRT207 -35mmGRT208 -24GRT208 -25GRT208 -40mmGRT209 -26GRT209 -27GRT209 -28GRT209 -45mmGRT210 -29GRT210 -30GRT210 -31GRT210 -32GRT210 -50mmGRT211 -32GRT211 -33GRT211 -34GRT211 -35GRT211 -55mmGRT212 -36GRT212 -37GRT212 -38GRT212 -39GRT212 -60mmGRT213 -40GRT213 -41GRT213 -65mmGRT214 -42GRT214 -43GRT214 -44GRT214 -70mmGRT215 -45GRT215 -46GRT215 -47GRT215 -48GRT215 -75mm
l
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
2 17/3264.3
2 17/3264.3
2 3/469.9
2 3/469.9
2 3/469.9
r
13/1620.6
15/1623.8
1 3/3227.8
1 3/1630.2
1 5/1633.3
1 3/834.9
1 15/3237.3
1 1/238.1
1 21/3242.1
1 23/3243.7
1 13/1646.0
1 7/847.6
1 5/1633.3
1 3/834.9
1 11/1642.9
251.0
2 27/3256.4
2 1/457.2
2 5/1658.7
2 9/1665.1
2 15/1674.6
3 7/1687.3
3 7/1687.3
3 5/892.1
K nh
2 13/3261.1
2 7/1661.9
2 3/469.9
3 1/1677.8
3 15/3288.1
3 7/1687.3
3 17/3289.7
4 3/16106.4
4 11/16119.1
5 13/32137.3
5 13/32137.3
5 1/2139.7
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
2.26857.60
2.42961.70
2.84672.30
2.84672.30
3.22081.80
3.35885.30
L W
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
RST-Seal R-Seal TRL-Seal
DBL-Seal Z-Shield Z-Shield
with Buna-N rubber lip.Full cover metal shroud with Buna-N rubber lip plus slinger.
Full cover metal shroud with triple (3) Buna-N rubber lips.
Full cover metal shroud with double (2) Buna-N rubber lips.
Full cover metal shroud.
Full cover metal shroud with slinger.
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Outer Ring
Inner Ring
Full cover metal shroud
80
Hanger Bearing UnitsGRHA200 Series GRIP-IT 360 Degree Locking
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
81
Sta
ndard
Mounte
d U
nits
Straight pipe thread is standard. Special threading available upon request.
Hanger Bearing UnitsUCHA200 Series Set Screw Locking
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
1. Straight pipe thread is standard. Special threading available upon request. 2. HA series housings can also be combined with the following insert bearings: HC, FH, FHS or GR Example: HCHA205-16 or FHHA205-16.
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
2.26857.60
2.42961.70
2.84672.30
2.84672.30
3.22081.80
3.35885.30
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-1
NPSM-1
NPSM-1 1/4
NPSM-1 1/4
NPSM-1 1/2
NPSM-1 1/2
NPSM-1 1/2
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3.3986.00
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 7/847.6
1 7/847.6
2 3/860.3
2 3/860.3
2 3/469.9
2 3/469.9
2 3/469.9
3 25/3296.0
4 1/16103.2
4 1/16103.2
4 9/16115.9
4 3/4120.7
5 11/32135.7
5 19/32142.1
5 29/32150.0
6 13/16173.0
7 7/8200.0
7 7/8200.0
7 7/8200.0
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
2 33/6463.9
2 33/6463.9
2 33/6463.9
2 3/469.9
2 7/873.0
3 15/6482.2
3 17/6482.9
3 27/3286.9
4 1/64102.0
4 39/64117.1
4 39/64117.1
4 39/64117.1
2 17/3264.3
3 1/1677.8
3 1/1677.8
3 5/892.1
3 25/3296.0
4 1/4108.0
4 21/32118.3
4 31/32126.0
5 19/32142.1
6 17/32165.9
6 17/32165.9
6 17/32165.9
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
125.4
1 3/3227.8
1 1/431.8
1 1/431.8
1 1/431.8
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215-45GR215 -46GR215 -47GR215 -48GR215 -75mm
HA-204-H
HA-205-H
HA-206-H
HA-207-H
HA-208-H
HA-209-H
HA-210-H
HA-211-H
HA-212-H
HA-213-H
HA-214-H
HA-215-H
a w c h l D K L Bearing No.
00
00
00
00
5/642.0
13/645.2
13/645.2
9/327.1
23/649.1
3/89.5
3/89.5
3/89.5
GRHA204 -12GRHA204 -13GRHA204 -20mmGRHA205 -13GRHA205 -14GRHA205 -15GRHA205 -16GRHA205 -25mmGRHA206 -17GRHA206 -18GRHA206 -19GRHA206 -20GRHA206 -30mmGRHA207 -20GRHA207 -21GRHA207 -22GRHA207 -23GRHA207 -35mmGRHA208 -24GRHA208 -25GRHA208 -40mmGRHA209 -26GRHA209 -27GRHA209 -28GRHA209 -45mmGRHA210 -29GRHA210 -30GRHA210 -31GRHA210 -32GRHA210 -50mmGRHA211 -32GRHA211 -33GRHA211 -34GRHA211 -35GRHA211 -55mmGRHA212 -36GRHA212 -37GRHA212 -38GRHA212 -39GRHA212 -60mmGRHA213 -40GRHA213 -41GRHA213 -65mmGRHA214 -42GRHA214 -43GRHA214 -44GRHA214 -70mmGRHA215 -45GRHA215 -46GRHA215 -47GRHA215 -48GRHA215 -75mm
ShaftDiam. W Housing
No.
inmmDimensions
n
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm
2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-1
NPSM-1
NPSM-1 1/4
NPSM-1 1/4
NPSM-1 1/2
NPSM-1 1/2
NPSM-1 1/2
0.7218.30
0.7218.30
0.7819.70
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
1.5639.70
1.5639.70
1.7544.40
1.7544.50
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 7/847.6
1 7/847.6
2 3/860.3
2 3/860.3
2 3/469.9
2 3/469.9
2 3/469.9
3 25/3296.0
3 25/3296.0
4 1/16103.2
4 1/16103.2
4 9/16115.9
4 3/4120.7
5 11/32135.7
5 19/32142.1
5 29/32150.0
6 13/16173.0
7 7/8200.0
7 7/8200.0
7 7/8200.0
2 33/6463.9
2 33/6463.9
2 33/6463.9
2 33/6463.9
2 3/469.9
2 7/873.0
3 15/6482.2
3 17/6482.9
3 27/3286.9
4 1/64102.0
4 39/64117.1
4 39/64117.1
4 39/64117.1
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
125.4
1 3/3227.8
1 1/431.8
1 1/431.8
1 1/431.8
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mm
UC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mm
UC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mm
HA-204-H
HA-204-H
HA-205-H
HA-206-H
HA-207-H
HA-208-H
HA-209-H
HA-210-H
HA-211-H
HA-212-H
HA-213-H
HA-214-H
HA-215-H
00
00
00
00
00
5/642.0
13/645.2
13/645.2
9/327.1
23/649.1
3/89.5
3/89.5
3/89.5
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
Unit No.
2 17/3264.3
2 17/3264.3
3 1/1677.8
3 1/1677.8
3 5/892.1
3 25/3296.0
4 1/4108.0
4 21/32118.3
4 31/32126.0
5 19/32142.1
6 17/32165.9
6 17/32165.9
6 17/32165.9
ShaftDiam. a w c h l D K Bi Bearing No.
UCHA201 -8UCHA201 -12mmUCHA202 -9UCHA202 -10UCHA202 -15mmUCHA203 -11UCHA203 -17mmUCHA204 -12UCHA204 -13UCHA204 -20mmUCHA205 -13UCHA205 -14UCHA205 -15UCHA205 -16UCHA205 -25mmUCHA206 -17UCHA206 -18UCHA206 -19UCHA206 -20UCHA206 -30mmUCHA207 -20UCHA207 -21UCHA207 -22UCHA207 -23UCHA207 -35mmUCHA208 -24UCHA208 -25UCHA208 -40mmUCHA209 -26UCHA209 -27UCHA209 -28UCHA209 -45mm
UCHA210 -29UCHA210 -30UCHA210 -31UCHA210 -32UCHA210 -50mmUCHA211 -32UCHA211 -33UCHA211 -34UCHA211 -35UCHA211 -55mmUCHA212 -36UCHA212 -37UCHA212 -38UCHA212 -39UCHA212 -60mmUCHA213 -40UCHA213 -41UCHA213 -65mmUCHA214 -42UCHA214 -43UCHA214 -44UCHA214 -70mmUCHA215 -45UCHA215 -46UCHA215 -47UCHA215 -48UCHA215 -75mm
ShaftDiam. m Housing
No.
inmmDimensions
n
P78_100 new++ 2010.1.27 2:01 AM Page 78
Hanger Bearing UnitsGRHA200 Series GRIP-IT 360 Degree Locking
■ Standard duty, high-grade cast iron■ Wide inner ring bearing■ Relubricatable unit with anti-rotation pin■ Black oxide plated inner and outer rings■ Standard seal: R-Seal
Triple lip seal and other options: See page 85
81
Sta
ndard
Mounte
d U
nits
Straight pipe thread is standard. Special threading available upon request.
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
2.26857.60
2.42961.70
2.84672.30
2.84672.30
3.22081.80
3.35885.30
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-1
NPSM-1
NPSM-1 1/4
NPSM-1 1/4
NPSM-1 1/2
NPSM-1 1/2
NPSM-1 1/2
1.7644.60
1.9449.20
2.1955.50
2.5765.40
2.6968.40
2.9374.50
3.3986.00
3.5089.00
4.06103.00
4.11104.50
4.39111.50
4.65118.00
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 7/847.6
1 7/847.6
2 3/860.3
2 3/860.3
2 3/469.9
2 3/469.9
2 3/469.9
3 25/3296.0
4 1/16103.2
4 1/16103.2
4 9/16115.9
4 3/4120.7
5 11/32135.7
5 19/32142.1
5 29/32150.0
6 13/16173.0
7 7/8200.0
7 7/8200.0
7 7/8200.0
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Unit No.
2 33/6463.9
2 33/6463.9
2 33/6463.9
2 3/469.9
2 7/873.0
3 15/6482.2
3 17/6482.9
3 27/3286.9
4 1/64102.0
4 39/64117.1
4 39/64117.1
4 39/64117.1
2 17/3264.3
3 1/1677.8
3 1/1677.8
3 5/892.1
3 25/3296.0
4 1/4108.0
4 21/32118.3
4 31/32126.0
5 19/32142.1
6 17/32165.9
6 17/32165.9
6 17/32165.9
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
125.4
1 3/3227.8
1 1/431.8
1 1/431.8
1 1/431.8
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215-45GR215 -46GR215 -47GR215 -48GR215 -75mm
HA-204-H
HA-205-H
HA-206-H
HA-207-H
HA-208-H
HA-209-H
HA-210-H
HA-211-H
HA-212-H
HA-213-H
HA-214-H
HA-215-H
a w c h l D K L Bearing No.
00
00
00
00
5/642.0
13/645.2
13/645.2
9/327.1
23/649.1
3/89.5
3/89.5
3/89.5
GRHA204 -12GRHA204 -13GRHA204 -20mmGRHA205 -13GRHA205 -14GRHA205 -15GRHA205 -16GRHA205 -25mmGRHA206 -17GRHA206 -18GRHA206 -19GRHA206 -20GRHA206 -30mmGRHA207 -20GRHA207 -21GRHA207 -22GRHA207 -23GRHA207 -35mmGRHA208 -24GRHA208 -25GRHA208 -40mmGRHA209 -26GRHA209 -27GRHA209 -28GRHA209 -45mmGRHA210 -29GRHA210 -30GRHA210 -31GRHA210 -32GRHA210 -50mmGRHA211 -32GRHA211 -33GRHA211 -34GRHA211 -35GRHA211 -55mmGRHA212 -36GRHA212 -37GRHA212 -38GRHA212 -39GRHA212 -60mmGRHA213 -40GRHA213 -41GRHA213 -65mmGRHA214 -42GRHA214 -43GRHA214 -44GRHA214 -70mmGRHA215 -45GRHA215 -46GRHA215 -47GRHA215 -48GRHA215 -75mm
ShaftDiam. W Housing
No.
inmmDimensions
n
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
1.18930.20
1.31133.30
82
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Cylindrical Cartridge UnitsUCC200 Series Set Screw Locking
Cylindrical Cartridge UnitsGRC200 Series GRIP-IT 360 Degree Locking
n Standard duty, high-grade cast ironn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Black oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Sta
ndard
Mounte
d U
nits
83
C series housings can also be combined with the following insert bearings: HC, FH, FHS or GR : Example HCC205-16 or FHC205-16.
0.7218.30
0.7218.30
0.7819.70
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
1.5639.70
1.5639.70
25/3219.800
25/3219.800
55/6421.800
1 1/1627.000
1 7/6428.200
1 3/1630.200
1 7/3231.000
1 19/6433.000
1 3/835.000
1 1/238.100
1 37/6440.100
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
2.83572.00
2.83572.00
3.15080.00
3.34785.00
3.54390.00
3.937100.00
4.331110.00
4.724120.00
4.921125.00
5.118130.00
5.512140.00
UC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mmUC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mm
C-204-H
C-204-H
C-205-H
C-206-H
C-207-H
C-208-H
C-209-H
C-210-H
C-211-H
C-212-H
C-213-H
a l Bi n m Bearing No.
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
UCC201 -8UCC201 -12mmUCC202 -9UCC202 -10UCC202 -15mmUCC203 -11UCC203 -17mmUCC204 -12UCC204 -13UCC204 -20mmUCC205 -13UCC205 -14UCC205 -15UCC205 -16UCC205 -25mmUCC206 -17UCC206 -18UCC206 -19UCC206 -20UCC206 -30mmUCC207 -20UCC207 -21UCC207 -22UCC207 -23UCC207 -35mmUCC208 -24UCC208 -25UCC208 -40mmUCC209 -26UCC209 -27UCC209 -28UCC209 -45mmUCC210 -29UCC210 -30UCC210 -31UCC210 -32UCC210 -50mmUCC211 -32UCC211 -33UCC211 -34UCC211 -35UCC211 -55mmUCC212 -36UCC212 -37UCC212 -38UCC212 -39UCC212 -60mmUCC213 -40UCC213 -41UCC213 -65mm
Unit No. ShaftDiam. Housing No.
inmmDimensions
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
1.5639.70
1.5639.70
25/3219.800
55/6421.800
1 1/1627.000
1 7/6428.200
1 3/1630.200
1 7/3231.000
1 19/6433.000
1 3/835.000
1 1/238.100
1 37/6440.100
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
2.83572.00
3.15080.00
3.34785.00
3.54390.00
3.937100.00
4.331110.00
4.724120.00
4.921125.00
5.118130.00
5.512140.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mm
C-204-H
C-205-H
C-206-H
C-207-H
C-208-H
C-209-H
C-210-H
C-211-H
C-212-H
C-213-H
a l L n m Bearing No.
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
2.26857.60
2.42961.70
2.84672.30
2.84672.30
GRC204 -12GRC204 -13GRC204 -20mmGRC205 -13GRC205 -14GRC205 -15GRC205 -16GRC205 -25mmGRC206 -17GRC206 -18GRC206 -19GRC206 -20GRC206 -30mmGRC207 -20GRC207 -21GRC207 -22GRC207 -23GRC207 -35mmGRC208 -24GRC208 -25GRC208 -40mmGRC209 -26GRC209 -27GRC209 -28GRC209 -45mmGRC210 -29GRC210 -30GRC210 -31GRC210 -32GRC210 -50mmGRC211 -32GRC211 -33GRC211 -34GRC211 -35GRC211 -55mmGRC212 -36GRC212 -37GRC212 -38GRC212 -39GRC212 -60mmGRC213 -40GRC213 -41GRC213 -65mm
Unit No. ShaftDiam. Housing No.
inmmDimensions
P78_100 new++ 2010.1.27 2:02 AM Page 80
Cylindrical Cartridge UnitsGRC200 Series GRIP-IT 360 Degree Locking
■ Standard duty, high-grade cast iron■ Wide inner ring bearing■ Relubricatable unit with anti-rotation pin■ Black oxide plated inner and outer rings■ Standard seal: R-Seal
Triple lip seal and other options: See page 85
Sta
ndard
Mounte
d U
nits
83
0.7218.30
0.8020.20
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
1.5639.70
1.5639.70
25/3219.800
55/6421.800
1 1/1627.000
1 7/6428.200
1 3/1630.200
1 7/3231.000
1 19/6433.000
1 3/835.000
1 1/238.100
1 37/6440.100
3/413/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
1.00025.40
2.83572.00
3.15080.00
3.34785.00
3.54390.00
3.937100.00
4.331110.00
4.724120.00
4.921125.00
5.118130.00
5.512140.00
GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mmGR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mm
C-204-H
C-205-H
C-206-H
C-207-H
C-208-H
C-209-H
C-210-H
C-211-H
C-212-H
C-213-H
a l L n m Bearing No.
1.37434.90
1.51238.40
1.65041.90
1.87047.50
2.11453.70
2.12253.90
2.26857.60
2.42961.70
2.84672.30
2.84672.30
GRC204 -12GRC204 -13GRC204 -20mmGRC205 -13GRC205 -14GRC205 -15GRC205 -16GRC205 -25mmGRC206 -17GRC206 -18GRC206 -19GRC206 -20GRC206 -30mmGRC207 -20GRC207 -21GRC207 -22GRC207 -23GRC207 -35mmGRC208 -24GRC208 -25GRC208 -40mmGRC209 -26GRC209 -27GRC209 -28GRC209 -45mmGRC210 -29GRC210 -30GRC210 -31GRC210 -32GRC210 -50mmGRC211 -32GRC211 -33GRC211 -34GRC211 -35GRC211 -55mmGRC212 -36GRC212 -37GRC212 -38GRC212 -39GRC212 -60mmGRC213 -40GRC213 -41GRC213 -65mm
Unit No. ShaftDiam. Housing No.
inmmDimensions
84
FLANGE & CASTED “SPECIALS” Bearing and Seal Features Selection Chart
85
Sta
ndard
Mounte
d U
nits
PEER offers many options and modifications on flange units. In addition,PEER offers custom casted specials made to exact customer specifications.Below are just a few examples. Contact your sales representative for further information.
Adjustable Flange UnitsCast iron UCFA series
Special cast iron housingsmade for special customer applications
Ductile Trunnion Common in agricultural applications
Ductile "ARM" designedfor agricultural applications
Private labeling available See page 33 for pillow block specials
P78_100 new++ 2010.1.27 2:02 AM Page 82
Bearing and Seal Features Selection Chart
85
Sta
ndard
Mounte
d U
nits
86
n Standard load capacityn Wide inner ring with spherical outer ringn Relubrication groove with oil hole on
set screw siden Anti-rotation pin on side opposite
grease grooven Nylon patched class 3A set screws are standardn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Insert Bearings For UnitsUC200 Series Set Screw Locking
87
Sta
ndard
Mounte
d U
nits
0.96924.60
1.13028.70
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
0.1574.00
0.1975.00
0.1975.00
0.2175.50
0.2205.60
0.2526.40
0.3158.00
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
0.393710.000
0.500012.700
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
0.0391.00
0.0391.00
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
1.574840.000
1.850447.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
0.63016.00
0.72018.30
0.72018.30
0.77619.70
0.87422.20
1.00025.40
1.18930.20
1000
1410
1410
1610
2320
3150
3650
2160
2900
2900
3150
4370
5770
7340
D Bi Be r n m G WDynamic
0.51213.00
0.629916.000
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
UCS201 -8UCS201 -12mmUCS202 -9UCS202 -10UCS202 -15mmUCS203 -11UCS203 -17mmUC201 -8UC201 -12mmUC202 -9UC202 -10UC202 -15mmUC203 -11UC203 -17mmUC204 -12UC204 -13UC204 -20mmUC205 -13UC205 -14UC205 -15UC205 -16UC205 -25mmUC206 -17UC206 -18UC206 -19UC206 -20UC206 -30mmUC207 -20UC207 -21UC207 -22UC207 -23UC207 -35mmUC208 -24UC208 -25UC208 -40mm
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
2.25657.30
2.44562.10
2.75670.00
3.03177.00
3.23282.10
3.42587.00
3.60291.50
3.87898.50
4.134105.00
4.390111.50
0.3158.00
0.3749.50
0.3749.50
0.43711.10
0.47212.00
0.47212.00
0.43711.10
0.55114.00
0.47212.00
0.59115.00
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1/2-20x1/2M12xP1.5
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.000025.400
1.189030.200
1.311033.300
1.311033.300
1.342534.100
1.563039.700
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/43 7/1685mm3 1/290mm
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.1183.00
0.1183.00
0.1183.00
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
5.5118140.000
5.9055150.000
6.2992160.000
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.56339.70
1.74844.40
1.75244.50
1.94149.30
2.03151.60
2.21756.30
4150
4650
5850
7250
8000
8800
9750
10400
11600
14100
7350
7880
9740
11780
13980
14000
14830
16280
17680
21470
D Bi Be r n m G WDynamic
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
1.26032.00
1.33934.00
1.41736.00
UC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
P78_100 new++ 2010.1.27 2:02 AM Page 84
87
Sta
ndard
Mounte
d U
nits
2.25657.30
2.44562.10
2.75670.00
3.03177.00
3.23282.10
3.42587.00
3.60291.50
3.87898.50
4.134105.00
4.390111.50
0.3158.00
0.3749.50
0.3749.50
0.43711.10
0.47212.00
0.47212.00
0.43711.10
0.55114.00
0.47212.00
0.59115.00
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1/2-20x1/2M12xP1.5
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.000025.400
1.189030.200
1.311033.300
1.311033.300
1.342534.100
1.563039.700
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.70
3.78096.00
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/4
3 7/1685mm3 1/290mm
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.1183.00
0.1183.00
0.1183.00
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
5.5118140.000
5.9055150.000
6.2992160.000
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.56339.70
1.74844.40
1.75244.50
1.94149.30
2.03151.60
2.21756.30
4150
4650
5850
7250
8000
8800
9750
10400
11600
14100
7350
7880
9740
11780
13980
14000
14830
16280
17680
21470
D Bi Be r n m G WDynamic
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
1.26032.00
1.33934.00
1.41736.00
UC209 -26UC209 -27UC209 -28UC209 -45mmUC210 -29UC210 -30UC210 -31UC210 -32UC210 -50mmUC211 -32UC211 -33UC211 -34UC211 -35UC211 -55mmUC212 -36UC212 -37UC212 -38UC212 -39UC212 -60mmUC213 -40UC213 -41UC213 -65mmUC214 -42UC214 -43UC214 -44UC214 -70mmUC215 -45UC215 -46UC215 -47UC215 -48UC215 -75mmUC216 -50UC216 -80mmUC217 -52UC217 -55UC217 -85mmUC218 -56UC218 -90mm
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
n Medium load capacity n Wide inner ring with spherical outer ringn Relubrication groove with oil hole on
set screw siden Anti-rotation pin on side opposite
grease grooven Nylon patched class 3A set screws are standardn Standard seal: R-Seal
Triple lip seal and otheroptions: See page 85
Insert Bearings For UnitsUCX00 Series Set Screw Locking
89
Sta
ndard
Mounte
d U
nits
88
*UCX06-20 is identical to the UC207-20 bearing and therefore is listed as such.**UCX10-32 is identical to the UC211-32 bearing and therefore is listed as such.***UCX11-36 is identical to the UC212-36 bearing and therefore is listed as such.
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
0.2205.60
0.2526.40
0.3158.00
0.3158.00
0.3749.50
0.3749.50
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
13/167/8
15/161
25mm1 1/161 1/81 3/161 1/430mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/191 7/8
1 15/162
50mm
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
2320
3150
3650
4150
4650
5850
4370
5770
7340
7350
7880
9740
D Bi Be r n m G WDynamic
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
UCX05 -13UCX05 -14UCX05 -15UCX05 -16UCX05 -25mmUCX06 -17UCX06 -18UCX06 -19UC207 -20 *UCX06 -30mmUCX07 -20UCX07 -21UCX07 -22UCX07 -23UCX07 -35mmUCX08 -24UCX08 -25UCX08 -40mmUCX09 -26UCX09 -27UCX09 -28UCX09 -45mmUCX10 -29UCX10 -30UCX10 -31UC211 -32 **UCX10 -50mm
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
3.03177.00
3.23282.10
3.42587.00
3.60291.50
3.87898.50
4.134105.004.390
111.50
0.43711.10
0.47212.00
0.47212.00
0.43711.10
0.55114.00
0.47212.000.59115.00
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1/2-20x1/2M12xP1.5
1.000025.400
1.000025.400
1.189030.200
1.311033.300
1.311033.300
1.342534.1001.563039.700
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.703.78096.00
22 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.1183.000.1183.00
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
5.5118140.000
5.9055150.0006.2992160.000
1.56339.70
1.56339.70
1.74844.40
1.75244.50
1.94149.30
2.03151.602.21756.30
7250
8000
8800
9750
10400
11600
14100
11780
13980
14000
14830
16280
17680
21470
1.06327.00
1.06327.00
1.14229.00
1.18130.00
1.26032.00
1.33934.001.41736.00
UCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36 ***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
D Bi Be r n m G WDynamic
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
P78_100 new++ 2010.1.27 2:02 AM Page 86
89
Sta
ndard
Mounte
d U
nits
*UCX06-20 is identical to the UC207-20 bearing and therefore is listed as such.**UCX10-32 is identical to the UC211-32 bearing and therefore is listed as such.***UCX11-36 is identical to the UC212-36 bearing and therefore is listed as such.
3.03177.00
3.23282.10
3.42587.00
3.60291.50
3.87898.50
4.134105.004.390111.50
0.43711.10
0.47212.00
0.47212.00
0.43711.10
0.55114.00
0.47212.000.59115.00
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1/2-20x1/2M12xP1.5
1.000025.400
1.000025.400
1.189030.200
1.311033.300
1.311033.300
1.342534.1001.563039.700
2.56365.10
2.56365.10
2.93774.60
3.06377.80
3.25282.60
3.37485.703.78096.00
22 1/162 1/82 3/162 1/455mm2 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm3 1/880mm3 1/485mm
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.1183.000.1183.00
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
5.5118140.000
5.9055150.0006.2992160.000
1.56339.70
1.56339.70
1.74844.40
1.75244.50
1.94149.30
2.03151.602.21756.30
7250
8000
8800
9750
10400
11600
14100
11780
13980
14000
14830
16280
17680
21470
1.06327.00
1.06327.00
1.14229.00
1.18130.00
1.26032.00
1.33934.001.41736.00
UCX11 -32UCX11 -33UCX11 -34UCX11 -35UC212 -36 ***UCX11 -55mmUCX12 -37UCX12 -38UCX12 -39UCX12 -60mmUCX13 -40UCX13 -41UCX13 -65mmUCX14 -42UCX14 -43UCX14 -44UCX14 -70mmUCX15 -45UCX15 -46UCX15 -47UCX15 -48UCX15 -75mmUCX16 -50UCX16 -80mmUCX17 -52UCX17 -85mm
D Bi Be r n m G WDynamic
Unit No. ShaftDiam.
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)
90
HC Seriesn Wide inner ring with spherical outer ringn Standard load capacityn Relubrication groove with oil hole on locking collar siden Oil hole opposite groove makes it
interchangeable with all manufacturersn Nylon patched class 3A set screw in collar is standardn Standard seal: R-Seal
Triple lip seal and other options: See page 85
HCR Seriesn Wide inner ring with
cylindrical outer ringn Standard load capacityn Non-relubricatable is standardn Nylon patched class 3A set screw in collar is standardn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Insert Bearings For UnitsHC200 / HCR200 Series Eccentric Locking Collar
91
Sta
ndard
Mounte
d U
nits
HCR series can be made with relubrication feature: Example: HCR205-16-GO.
0.1975.00
0.1975.00
0.1975.00
0.1894.80
0.2366.00
0.2566.50
0.2566.50
0.547213.900
0.669317.000
0.669317.000
0.685017.400
0.716518.200
0.740218.800
0.842521.400
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
‘
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
0.51213.00
0.59115.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
1.574840.000
1.850447.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
20mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Spherical Unit No.
1.09427.80
1.33934.00
1.33934.00
1.37034.80
1.43336.40
1.48037.60
1.68542.80
0.5313.5
0.5313.5
0.5313.5
0.5313.5
0.6215.9
0.6917.5
0.7218.3
0.0391.00
0.0591.50
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
1000
1410
1410
1610
2320
3150
3650
2160
2900
2900
3150
4370
5770
7340
ShaftDiam. W KL Bi Be r n m
Dynamic
1.4737.3
1.7143.5
1.7143.5
1.7444.3
1.9048.3
2.0151.1
2.2256.3
HCS201 -8HCS201 -12mmHCS202 -9HCS202 -10HCS202 -15mmHCS203 -11HCS203 -17mmHC201 -8HC201 -12mmHC202 -9HC202 -10HC202 -15mmHC203 -11HC203 -17mmHC204 -12HC204 -20mmHC205 -13HC205 -14HC205 -15HC205 -16HC205 -25mmHC206 -17HC206 -18HC206 -19HC206 -20HC206 -30mmHC207 -20HC207 -21HC207 -22HC207 -23HC207 -35mmHC208 -24HC208 -25HC208 -40mm
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)Cylindrical Unit No.
HCR201 -8HCR201 -12mmHCR202 -9HCR202 -10HCR202 -15mmHCR203 -11HCR203 -17mmHCR204 -12HCR204 -20mmHCR205 -13HCR205 -14HCR205 -15HCR205 -16HCR205 -25mmHCR206 -17HCR206 -18HCR206 -19HCR206 -20HCR206 -30mmHCR207 -20HCR207 -21HCR207 -22HCR207 -23HCR207 -35mmHCR208 -24HCR208 -25HCR208 -40mm
G
1.12628.60
1.26032.00
1.26032.00
1.50038.10
1.75244.50
2.18955.60
2.37460.30
0.54713.90
0.66917.00
0.66917.00
0.68517.40
0.71718.20
0.74018.80
0.84321.40
D
0.2566.50
0.2566.50
0.3158.00
0.3158.00
0.3358.50
0.3358.50
0.3358.50
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/8
2 3/1655mm2 1/4
2 5/162 3/8
2 7/1660mm2 1/2
2 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Spherical Unit No.
0.7218.3
0.7218.3
0.8220.8
0.8722.2
0.9323.5
0.9423.8
0.9423.8
4150
4650
5850
7250
8000
8800
9750
7350
7880
9740
11780
13980
14000
14830
ShaftDiam. W K
DynamicHC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mmHC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)Cylindrical Unit No.
HCR209 -26HCR209 -27HCR209 -28HCR209 -45mmHCR210 -29HCR210 -30HCR210 -31HCR210 -32HCR210 -50mmHCR211 -32HCR211 -33HCR211 -34HCR211 -35HCR211 -55mmHCR212 -36HCR212 -37HCR212 -38HCR212 -39HCR212 -60mmHCR213 -40HCR213 -41HCR213 -65mmHCR214 -42HCR214 -43HCR214 -44HCR214 -70mmHCR215 -45HCR215 -46HCR215 -47HCR215 -48HCR215 -75mm
G
2.50063.50
2.75269.90
3.0076.20
3.31184.10
3.38686.00
3.54390.00
4.000101.60
D L Bi Be r n m
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
2.2256.3
2.4762.7
2.8171.4
3.0677.8
3.3785.7
3.3785.7
3.6392.1
1.68542.80
1.93749.20
2.18155.40
2.43361.80
2.68568.20
2.68568.20
2.93774.60
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.842521.400
0.968524.600
1.090627.700
1.216530.900
1.342534.100
1.342534.100
1.468537.300
0.84321.40
0.96924.60
1.09127.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
P78_100 new++ 2010.1.27 2:02 AM Page 88
91
Sta
ndard
Mounte
d U
nits
HCR series can be made with relubrication feature: Example: HCR205-16-GO.
0.2566.50
0.2566.50
0.3158.00
0.3158.00
0.3358.50
0.3358.50
0.3358.50
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
7/16-20x7/16M12xP1.5
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm
2 13/162 7/8
2 15/163
75mm
Spherical Unit No.
0.7218.3
0.7218.3
0.8220.8
0.8722.2
0.9323.5
0.9423.8
0.9423.8
4150
4650
5850
7250
8000
8800
9750
7350
7880
9740
11780
13980
14000
14830
ShaftDiam. W K
DynamicHC209 -26HC209 -27HC209 -28HC209 -45mmHC210 -29HC210 -30HC210 -31HC210 -32HC210 -50mmHC211 -32HC211 -33HC211 -34HC211 -35HC211 -55mmHC212 -36HC212 -37HC212 -38HC212 -39HC212 -60mmHC213 -40HC213 -41HC213 -65mmHC214 -42HC214 -43HC214 -44HC214 -70mmHC215 -45HC215 -46HC215 -47HC215 -48HC215 -75mm
ds(UNF-Thread) Static
inmmDimensions
Load Rating (Lbs.)Cylindrical Unit No.
HCR209 -26HCR209 -27HCR209 -28HCR209 -45mmHCR210 -29HCR210 -30HCR210 -31HCR210 -32HCR210 -50mmHCR211 -32HCR211 -33HCR211 -34HCR211 -35HCR211 -55mmHCR212 -36HCR212 -37HCR212 -38HCR212 -39HCR212 -60mmHCR213 -40HCR213 -41HCR213 -65mmHCR214 -42HCR214 -43HCR214 -44HCR214 -70mmHCR215 -45HCR215 -46HCR215 -47HCR215 -48HCR215 -75mm
G
2.50063.50
2.75269.90
3.0076.20
3.31184.10
3.38686.00
3.54390.00
4.000101.60
D L Bi Be r n m
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
2.2256.3
2.4762.7
2.8171.4
3.0677.8
3.3785.7
3.3785.7
3.6392.1
1.68542.80
1.93749.20
2.18155.40
2.43361.80
2.68568.20
2.68568.20
2.93774.60
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.842521.400
0.968524.600
1.090627.700
1.216530.900
1.342534.100
1.342534.100
1.468537.300
0.84321.40
0.96924.60
1.09127.70
1.21730.90
1.34334.10
1.34334.10
1.46937.30
92
n Standard load capacityn Wide inner ring with spherical outer ringn Relubrication groove with oil hole on locking
collar siden Anti-rotation pin on side opposite grease
grooven Black oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Insert Bearings For UnitsGR200 Series GRIP-IT 360 Degree Locking
93
Sta
ndard
Mounte
d U
nits
ds(UNF-Thread)
1.75644.60
1.75644.60
1.93749.20
2.18555.50
2.57565.40
2.69368.40
0.72018.30
0.72018.30
0.79520.20
0.87422.20
1.00025.40
1.18930.20
8-32x5/8
8-32x5/8
8-32x5/8
8-32x5/8
10-24x3/4
10-24x3/4
0.0591.50
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
1.3734.9
1.3734.9
1.5138.4
1.6541.9
1.8747.5
2.1153.7
1/25/83/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
0.59115.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
1.850447.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
0.500012.700
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
1410
1410
1610
2320
3150
3650
2900
2900
3150
4370
5770
7340
D L Bi Be r n m WDynamic
1.22031.00
1.22031.00
1.35834.50
1.50038.10
1.68942.90
1.93749.20
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)K
0.379.5
0.379.5
0.379.5
0.379.3
0.4411.2
0.4311.0
GR201 -8GR202 -10GR204 -12GR204 -13GR204 -20mmGR205 -13GR205 -14GR205 -15GR205 -16GR205 -25mmGR206 -17GR206 -18GR206 -19GR206 -20GR206 -30mmGR207 -20GR207 -21GR207 -22GR207 -23GR207 -35mmGR208 -24GR208 -25GR208 -40mm
ds(UNF-Thread)
2.93374.50
3.38686.00
3.50489.00
4.055103.00
4.114104.50
4.390111.50
4.646118.00
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.56339.70
1.74844.40
1.75244.50
10-24x3/4
1/4-20x1
1/4-20x1
5/16-18x1
5/16-18x1
5/16-18x1
3/8-16x1.5
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
2.1253.9
2.2757.6
2.4361.7
2.8572.3
2.8572.3
3.2281.8
3.3685.3
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm2 7/8
2 15/163
75mm
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.000025.400
1.189030.200
1.311033.300
4150
4650
5850
7250
8000
8800
9750
7350
7880
9740
11780
13980
14000
14830
D L Bi Be r n m WDynamic
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)K
0.4511.5
0.5714.5
0.5814.8
0.6917.5
0.6917.5
0.6917.5
0.7118.0
GR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -46GR215 -47GR215 -48GR215 -75mm
P78_100 new++ 2010.1.27 2:02 AM Page 90
93
Sta
ndard
Mounte
d U
nits
ds(UNF-Thread)
2.93374.50
3.38686.00
3.50489.00
4.055103.00
4.114104.50
4.390111.50
4.646118.00
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.56339.70
1.74844.40
1.75244.50
10-24x3/4
1/4-20x1
1/4-20x1
5/16-18x1
5/16-18x1
5/16-18x1
3/8-16x1.5
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.0982.50
0.0982.50
0.0982.50
2.1253.9
2.2757.6
2.4361.7
2.8572.3
2.8572.3
3.2281.8
3.3685.3
1 5/81 11/16
1 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm2 1/22 9/1665mm2 5/8
2 11/162 3/470mm2 7/8
2 15/163
75mm
0.86622.00
0.86622.00
0.98425.00
1.06327.00
1.06327.00
1.14229.00
1.18130.00
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.7244120.000
4.9213125.000
5.1181130.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.000025.400
1.189030.200
1.311033.300
4150
4650
5850
7250
8000
8800
9750
7350
7880
9740
11780
13980
14000
14830
D L Bi Be r n m WDynamic
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.56365.10
2.93774.60
3.06377.80
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)K
0.4511.5
0.5714.5
0.5814.8
0.6917.5
0.6917.5
0.6917.5
0.7118.0
GR209 -26GR209 -27GR209 -28GR209 -45mmGR210 -29GR210 -30GR210 -31GR210 -32GR210 -50mmGR211 -32GR211 -33GR211 -34GR211 -35GR211 -55mmGR212 -36GR212 -37GR212 -38GR212 -39GR212 -60mmGR213 -40GR213 -41GR213 -65mmGR214 -42GR214 -43GR214 -44GR214 -70mmGR215 -46GR215 -47GR215 -48GR215 -75mm
94
n Popular series used in many rollerapplications
n Standard load capacityn Wide inner ring with cylindrical outer ring and
snap ringn Relubrication groove with oil hole on side
opposite of set screwsn Nylon patched class 3A set screws are standardn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Insert BearingsSER Series Set Screw Locking
Insert BearingsSER-ZSFF &SER-ZMKFF Free Spinning Series Set ScrewLocking
n ZSFF Series has oil lubrication only while ZMKFFis manufactured with light grease fill to ensure“free running/low drag”
n Standard load capacityn Wide inner ring with cylindrical outer ring and
snap ringn Relubrication groove with oil hole on side
opposite of set screwsn Black oxide plated inner and outer ringsn Nylon patched class 3A set screws are standardn Standard seal: ‘Z’ -non contact
shields with slinger cover
Options seals: See page 85
95
Sta
ndard
Mounte
d U
nits
ds(UNF-
Thread)1/29/165/8
11/163/4
20mm7/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 3/82 7/1660mm2 1/2
2 11/1670mm2 7/8
2 15/1675mm
3 7/16
1410
1610
2320
3150
3650
4150
4650
5850
7250
8000
8800
11600
D Bi Be n m E W oDynamic
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)T
SER -8SER -9SER -10SER -11SER -12SER -20mmSER -14SER -15SER -16SER -25mmSER -17SER -18SER -19SER -20SSER -30mmSER -20SER -21SER -22SER -23SER -35mmSER -24SER -25SER -40mmSER -26SER -27SER -28SER -45mmSER -30SER -31SER -32SSER -50mmSER -32SER -34SER -35SER -55mmSER -36SER -38SER -39SER -60mmSER -40SER -43SER -70mmSER -46SER -47SER -75mmSER -55
J G Y X
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
7/16-20x7/16M12XP1.5
7/16-20x7/16M12XP1.5
2900
3150
4370
5770
7340
7350
7880
9740
11780
13980
14000
17680
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
0.123.10
0.123.100.123.10
0.1574.00
0.2055.20
0.2205.60
0.2205.60
0.2526.40
0.2526.40
0.2957.50
0.2957.50
0.2957.50
0.3117.90
0.39410.000.44111.20
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
3.42587.00
3.60291.504.134105.00
0.4812.1
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
1.0927.7
1.2230.91.6241.2
0.76819.50
0.85821.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.68942.90
1.75244.502.03151.60
0.452811.500
0.515713.100
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.063027.000
1.311033.3001.342534.100
0.62615.90
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
1.37434.90
1.50038.101.93749.20
1.22031.00
1.37434.90
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.75269.90
3.06377.803.37485.70
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.9213125.000
5.1181130.000
5.9055150.000
0.1975.00
0.2205.60
0.2205.60
0.2526.40
0.3158.00
0.3158.00
0.3749.50
0.3749.50
0.43711.10
0.43711.10
0.43711.100.47212.00
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.164.06
0.164.060.194.90
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
5.30134.70
5.50139.70
6.29159.70
0.6015.36
0.6316.06
0.6416.28
0.7418.68
0.8521.48
0.8521.48
0.9624.28
0.9624.28
1.1729.78
1.2832.61
1.2832.611.38
35.00
ds(UNF-
Thread)
0.1574.00
0.2055.20
0.2205.60
0.2205.60
0.2526.40
0.2526.40
0.2957.50
0.2957.50
0.2957.50
0.3117.90
0.39410.00
0.44111.20
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
3.42587.00
3.60291.50
4.134105.00
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
7/16-20x7/16M12XP1.5
7/16-20x7/16M12XP1.5
0.76819.50
0.85821.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.68942.90
1.75244.50
2.03151.60
1.22031.00
1.37434.90
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.75269.90
3.06377.80
3.37485.70
1/29/165/8
11/163/4
20mm7/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 3/82 7/1660mm2 1/2
2 11/1670mm2 7/8
2 15/1675mm
3 7/16
Unit No.
0.452811.500
0.515713.100
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.063027.000
1.311033.300
1.342534.100
0.4812.1
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
1.0927.7
1.2230.9
1.6241.2
1410
1610
2320
3150
3650
4150
4650
5850
7250
8000
8800
11600
2900
3150
4370
5770
7340
7350
7880
9740
11780
13980
14000
17680
D BeBi n m E W oDynamic
0.62615.90
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
1.37434.90
1.50038.10
1.93749.20
Static
inmmDimensions
Load Rating (Lbs.)T
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
0.123.10
0.123.10
0.123.10
SER -8-ZSFFSER -9-ZSFFSER -10-ZSFFSER -11-ZSFFSER -12-ZSFFSER -20mm-ZSFFSER -14-ZSFFSER -15-ZSFFSER -16-ZSFFSER -25mm-ZSFFSER -17-ZSFFSER -18-ZSFFSER -19-ZSFFSER -20S-ZSFFSER -30mm-ZSFFSER -20-ZSFFSER -21-ZSFFSER -22-ZSFFSER -23-ZSFFSER -35mm-ZSFFSER -24-ZSFFSER -25-ZSFFSER -40mm-ZSFFSER -26-ZSFFSER -27-ZSFFSER -28-ZSFFSER -45mm-ZSFFSER -30-ZSFFSER -31-ZSFFSER -32S-ZSFFSER -50mm-ZSFFSER -32-ZSFFSER -34-ZSFFSER -35-ZSFFSER -55mm-ZSFFSER -36-ZSFFSER -38-ZSFFSER -39-ZSFFSER -60mm-ZSFFSER -40-ZSFFSER -43-ZSFFSER -70mm-ZSFFSER -46-ZSFFSER -47-ZSFFSER -75mm-ZSFFSER -55-ZSFF
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
5.30134.70
5.50139.70
6.29159.70
0.1975.00
0.2205.60
0.2205.60
0.2526.40
0.3158.00
0.3158.00
0.3749.50
0.3749.50
0.43711.10
0.43711.10
0.43711.10
0.47212.00
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.164.06
0.164.06
0.194.90
GJ Y X
0.6015.36
0.6316.06
0.6416.28
0.7418.68
0.8521.48
0.8521.48
0.9624.28
0.9624.28
1.1729.78
1.2832.61
1.2832.61
1.3835.00
SER -8-ZMKFFSER -9-ZMKFFSER -10-ZMKFFSER -11-ZMKFFSER -12-ZMKFFSER -20mm-ZMKFFSER -14-ZMKFFSER -15-ZMKFFSER -16-ZMKFFSER -25mm-ZMKFFSER -17-ZMKFFSER -18-ZSFFSER -19-ZMKFFSER -20S-ZMKFFSER -30mm-ZMKFFSER -20-ZMKFFSER -21-ZMKFFSER -22-ZMKFFSER -23-ZMKFFSER -35mm-ZMKFFSER -24-ZMKFFSER -25-ZMKFFSER -40mm-ZMKFFSER -26-ZMKFFSER -27-ZMKFFSER -28-ZMKFFSER -45mm-ZMKFFSER -30-ZMKFFSER -31-ZMKFFSER -32S-ZMKFFSER -50mm-ZMKFFSER -32-ZMKFFSER -34-ZMKFFSER -35-ZMKFFSER -55mm-ZMKFFSER -36-ZMKFFSER -38-ZMKFFSER -39-ZMKFFSER -60mm-ZMKFFSER -40-ZMKFFSER -43-ZMKFFSER -70mm-ZMKFFSER -46-ZMKFFSER -47-ZMKFFSER -75mm-ZMKFFSER -55-ZMKFF
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.9213125.000
5.1181130.000
5.9055150.000
ShaftDiam.
P78_100 new++ 2010.1.27 2:02 AM Page 92
Insert BearingsSER-ZSFF&SER-ZMKFF Free Spinning Series Set ScrewLocking
■ ZSFF Series has oil lubrication only while ZMKFFis manufactured with light grease fill to ensure“free running/low drag”
■ Standard load capacity■ Wide inner ring with cylindrical outer ring and
snap ring■ Relubrication groove with oil hole on side
opposite of set screws■ Black oxide plated inner and outer rings■ Nylon patched class 3A set screws are standard■ Standard seal: ‘Z’ -non contact
shields with slinger cover
Options seals: See page 85
95
Sta
ndard
Mounte
d U
nits
ds(UNF-
Thread)
0.1574.00
0.2055.20
0.2205.60
0.2205.60
0.2526.40
0.2526.40
0.2957.50
0.2957.50
0.2957.50
0.3117.90
0.39410.00
0.44111.20
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
3.42587.00
3.60291.50
4.134105.00
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
1/4-28x1/4M6XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
5/16-24x5/16M8XP1.0
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
3/8-24x3/8M10XP1.25
7/16-20x7/16M12XP1.5
7/16-20x7/16M12XP1.5
0.76819.50
0.85821.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1.68942.90
1.75244.50
2.03151.60
1.22031.00
1.37434.90
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2.75269.90
3.06377.80
3.37485.70
1/29/165/8
11/163/4
20mm7/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 3/82 7/1660mm2 1/2
2 11/1670mm2 7/8
2 15/1675mm
3 7/16
Unit No.
0.452811.500
0.515713.100
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.063027.000
1.311033.300
1.342534.100
0.4812.1
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
1.0927.7
1.2230.9
1.6241.2
1410
1610
2320
3150
3650
4150
4650
5850
7250
8000
8800
11600
2900
3150
4370
5770
7340
7350
7880
9740
11780
13980
14000
17680
D BeBi n m E W oDynamic
0.62615.90
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
1.37434.90
1.50038.10
1.93749.20
Static
inmmDimensions
Load Rating (Lbs.)T
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
0.123.10
0.123.10
0.123.10
SER -8-ZSFFSER -9-ZSFFSER -10-ZSFFSER -11-ZSFFSER -12-ZSFFSER -20mm-ZSFFSER -14-ZSFFSER -15-ZSFFSER -16-ZSFFSER -25mm-ZSFFSER -17-ZSFFSER -18-ZSFFSER -19-ZSFFSER -20S-ZSFFSER -30mm-ZSFFSER -20-ZSFFSER -21-ZSFFSER -22-ZSFFSER -23-ZSFFSER -35mm-ZSFFSER -24-ZSFFSER -25-ZSFFSER -40mm-ZSFFSER -26-ZSFFSER -27-ZSFFSER -28-ZSFFSER -45mm-ZSFFSER -30-ZSFFSER -31-ZSFFSER -32S-ZSFFSER -50mm-ZSFFSER -32-ZSFFSER -34-ZSFFSER -35-ZSFFSER -55mm-ZSFFSER -36-ZSFFSER -38-ZSFFSER -39-ZSFFSER -60mm-ZSFFSER -40-ZSFFSER -43-ZSFFSER -70mm-ZSFFSER -46-ZSFFSER -47-ZSFFSER -75mm-ZSFFSER -55-ZSFF
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
5.30134.70
5.50139.70
6.29159.70
0.1975.00
0.2205.60
0.2205.60
0.2526.40
0.3158.00
0.3158.00
0.3749.50
0.3749.50
0.43711.10
0.43711.10
0.43711.10
0.47212.00
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.164.06
0.164.06
0.194.90
GJ Y X
0.6015.36
0.6316.06
0.6416.28
0.7418.68
0.8521.48
0.8521.48
0.9624.28
0.9624.28
1.1729.78
1.2832.61
1.2832.61
1.3835.00
SER -8-ZMKFFSER -9-ZMKFFSER -10-ZMKFFSER -11-ZMKFFSER -12-ZMKFFSER -20mm-ZMKFFSER -14-ZMKFFSER -15-ZMKFFSER -16-ZMKFFSER -25mm-ZMKFFSER -17-ZMKFFSER -18-ZSFFSER -19-ZMKFFSER -20S-ZMKFFSER -30mm-ZMKFFSER -20-ZMKFFSER -21-ZMKFFSER -22-ZMKFFSER -23-ZMKFFSER -35mm-ZMKFFSER -24-ZMKFFSER -25-ZMKFFSER -40mm-ZMKFFSER -26-ZMKFFSER -27-ZMKFFSER -28-ZMKFFSER -45mm-ZMKFFSER -30-ZMKFFSER -31-ZMKFFSER -32S-ZMKFFSER -50mm-ZMKFFSER -32-ZMKFFSER -34-ZMKFFSER -35-ZMKFFSER -55mm-ZMKFFSER -36-ZMKFFSER -38-ZMKFFSER -39-ZMKFFSER -60mm-ZMKFFSER -40-ZMKFFSER -43-ZMKFFSER -70mm-ZMKFFSER -46-ZMKFFSER -47-ZMKFFSER -75mm-ZMKFFSER -55-ZMKFF
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
4.9213125.000
5.1181130.000
5.9055150.000
ShaftDiam.
96
n Popular series used in many rollerapplications
n Standard load capacityn Wide inner ring with cylindrical outer ring
and snap ringn Relubrication groove with oil hole on side
opposite of locking collarn Black oxide plated inner and outer ringsn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Insert BearingsGER Series GRIP-IT 360 Degree Locking
Insert BearingsGER-ZSFF & GER-ZMKFF Free Spinning Series GRIP-IT 360 Degree Locking
n ZSFF Series has oil lubrication only while ZMKFF is manufactured with light grease fill to ensure “free running/low drag”
n Standard load capacityn Wide inner ring with cylindrical outer ring
and snap ringn Relubrication groove with oil hole on
side opposite of locking collarn Black oxide plated inner and outer ringsn Standard seal: ‘Z’ -non contact
shields with slinger cover
Options seals: See page 85
97
Sta
ndard
Mounte
d U
nits
ds(UNF-
Thread)1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
0.6015.3
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
8-32X5/8
8-32X5/8
8-32X5/8
10-24x3/4
10-24x3/4
10-24x3/4
1/4-20x1
1/4-20x1
5/16-18x1
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.22031.00
1.35834.50
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
3/420mm7/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
1.3734.9
1.5138.4
1.6541.9
1.8747.5
2.1153.7
2.1253.9
2.2757.6
2.4361.7
2.8572.3
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
0.72018.30
0.79520.20
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1410
1610
2320
3150
3650
4150
4650
5850
7250
2900
3150
4370
5770
7340
7350
7880
9740
11780
D Bi Be L n m E W1Dynamic
0.75219.10
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)J
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
GER204 -12GER204 -20mmGER205 -14GER205 -15GER205 -16GER205 -25mmGER206 -17GER206 -18GER206 -19GER206 -20GER206 -30mmGER207 -20GER207 -21GER207 -22GER207 -23GER207 -35mmGER208 -24GER208 -25GER208 -40mmGER209 -26GER209 -27GER209 -28GER209 -45mmGER210 -30GER210 -31GER210 -32GER210 -50mmGER211 -32GER211 -34GER211 -35GER211 -55mmGER212 -36GER212 -37GER212 -38GER212 -39GER212 -60mm
0.379.5
0.379.5
0.379.3
0.4411.2
0.4311.0
0.4511.5
0.5714.5
0.5814.8
0.6917.5
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
T Y K W
1.75644.60
1.93749.20
2.18555.50
2.57565.40
2.69368.40
2.93374.50
3.38686.00
3.50489.00
4.055103.00
ds(UNF-
Thread)1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
0.6015.3
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
8-32X5/8
8-32X5/8
8-32X5/8
10-24x3/4
10-24x3/4
10-24x3/4
1/4-20x1
1/4-20x1
5/16-18x1
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.22031.00
1.35834.50
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
3/420mm7/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
1.3734.9
1.5138.4
1.6541.9
1.8747.5
2.1153.7
2.1253.9
2.2757.6
2.4361.7
2.8572.3
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
0.72018.30
0.79520.20
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1410
1610
2320
3150
3650
4150
4650
5850
7250
2900
3150
4370
5770
7340
7350
7880
9740
11780
D BeBi L n m E W1Dynamic
0.75219.10
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)J
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
GER204-12-ZSFFGER204-20mm-ZSFFGER205-14-ZSFFGER205-15-ZSFFGER205-16-ZSFFGER205-25mm-ZSFFGER206-17-ZSFFGER206-18-ZSFFGER206-19-ZSFFGER206-20-ZSFFGER206-30mm-ZSFFGER207-20-ZSFFGER207-21-ZSFFGER207-22-ZSFFGER207-23-ZSFFGER207-35mm-ZSFFGER208-24-ZSFFGER208-25-ZSFFGER208-40mm-ZSFFGER209-26-ZSFFGER209-27-ZSFFGER209-28-ZSFFGER209-45mm-ZSFFGER210-30-ZSFFGER210-31-ZSFFGER210-32-ZSFFGER210-50mm-ZSFFGER211-32-ZSFFGER211-34-ZSFFGER211-35-ZSFFGER211-55mm-ZSFFGER212-36-ZSFFGER212-37-ZSFFGER212-38-ZSFFGER212-39-ZSFFGER212-60mm-ZSFF
0.379.5
0.379.5
0.379.3
0.4411.2
0.4311.0
0.4511.5
0.5714.5
0.5814.8
0.6917.5
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
YT K W
1.75644.60
1.93749.20
2.18555.50
2.57565.40
2.69368.40
2.93374.50
3.38686.00
3.50489.00
4.055103.00
GER204-12-ZMKFFGER204-20mm-ZMKFFGER205-14-ZMKFFGER205-15-ZMKFFGER205-16-ZMKFFGER205-25mm-ZMKFFGER206-17-ZMKFFGER206-18-ZMKFFGER206-19-ZMKFFGER206-20-ZMKFFGER206-30mm-ZMKFFGER207-20-ZMKFFGER207-21-ZMKFFGER207-22-ZMKFFGER207-23-ZMKFFGER207-35mm-ZMKFFGER208-24-ZMKFFGER208-25-ZMKFFGER208-40mm-ZMKFFGER209-26-ZMKFFGER209-27-ZMKFFGER209-28-ZMKFFGER209-45mm-ZMKFFGER210-30-ZMKFFGER210-31-ZMKFFGER210-32-ZMKFFGER210-50mm-ZMKFFGER211-32-ZMKFFGER211-34-ZMKFFGER211-35-ZMKFFGER211-55mm-ZMKFFGER212-36-ZMKFFGER212-37-ZMKFFGER212-38-ZMKFFGER212-39-ZMKFFGER212-60mm-ZMKFF
P78_100 new++ 2010.1.27 2:02 AM Page 94
Insert BearingsGER-ZSFF & GER-ZMKFF Free Spinning Series GRIP-IT 360 Degree Locking
■ ZSFF Series has oil lubrication only while ZMKFF is manufactured with light grease fill to ensure “free running/low drag”
■ Standard load capacity■ Wide inner ring with cylindrical outer ring
and snap ring■ Relubrication groove with oil hole on
side opposite of locking collar■ Black oxide plated inner and outer rings■ Standard seal: ‘Z’ -non contact
shields with slinger cover
Options seals: See page 85
97
Sta
ndard
Mounte
d U
nits
ds(UNF-
Thread)1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
0.6015.3
0.6015.3
0.6717.0
0.7318.6
0.8922.6
0.8922.6
0.8922.6
0.9524.2
1.0225.8
8-32X5/8
8-32X5/8
8-32X5/8
10-24x3/4
10-24x3/4
10-24x3/4
1/4-20x1
1/4-20x1
5/16-18x1
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.22031.00
1.35834.50
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
3/420mm7/8
15/161
25mm
1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm1 7/8
1 15/162 (s)
50mm2
2 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
1.3734.9
1.5138.4
1.6541.9
1.8747.5
2.1153.7
2.1253.9
2.2757.6
2.4361.7
2.8572.3
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
0.72018.30
0.79520.20
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
1410
1610
2320
3150
3650
4150
4650
5850
7250
2900
3150
4370
5770
7340
7350
7880
9740
11780
D BeBi L n m E W1Dynamic
0.75219.10
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)J
0.102.46
0.102.46
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
0.133.28
GER204-12-ZSFFGER204-20mm-ZSFFGER205-14-ZSFFGER205-15-ZSFFGER205-16-ZSFFGER205-25mm-ZSFFGER206-17-ZSFFGER206-18-ZSFFGER206-19-ZSFFGER206-20-ZSFFGER206-30mm-ZSFFGER207-20-ZSFFGER207-21-ZSFFGER207-22-ZSFFGER207-23-ZSFFGER207-35mm-ZSFFGER208-24-ZSFFGER208-25-ZSFFGER208-40mm-ZSFFGER209-26-ZSFFGER209-27-ZSFFGER209-28-ZSFFGER209-45mm-ZSFFGER210-30-ZSFFGER210-31-ZSFFGER210-32-ZSFFGER210-50mm-ZSFFGER211-32-ZSFFGER211-34-ZSFFGER211-35-ZSFFGER211-55mm-ZSFFGER212-36-ZSFFGER212-37-ZSFFGER212-38-ZSFFGER212-39-ZSFFGER212-60mm-ZSFF
0.379.5
0.379.5
0.379.3
0.4411.2
0.4311.0
0.4511.5
0.5714.5
0.5814.8
0.6917.5
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
0.051.35
0.051.35
0.071.90
0.071.90
0.071.90
0.071.90
0.112.70
0.112.70
0.112.70
YT K W
1.75644.60
1.93749.20
2.18555.50
2.57565.40
2.69368.40
2.93374.50
3.38686.00
3.50489.00
4.055103.00
GER204-12-ZMKFFGER204-20mm-ZMKFFGER205-14-ZMKFFGER205-15-ZMKFFGER205-16-ZMKFFGER205-25mm-ZMKFFGER206-17-ZMKFFGER206-18-ZMKFFGER206-19-ZMKFFGER206-20-ZMKFFGER206-30mm-ZMKFFGER207-20-ZMKFFGER207-21-ZMKFFGER207-22-ZMKFFGER207-23-ZMKFFGER207-35mm-ZMKFFGER208-24-ZMKFFGER208-25-ZMKFFGER208-40mm-ZMKFFGER209-26-ZMKFFGER209-27-ZMKFFGER209-28-ZMKFFGER209-45mm-ZMKFFGER210-30-ZMKFFGER210-31-ZMKFFGER210-32-ZMKFFGER210-50mm-ZMKFFGER211-32-ZMKFFGER211-34-ZMKFFGER211-35-ZMKFFGER211-55mm-ZMKFFGER212-36-ZMKFFGER212-37-ZMKFFGER212-38-ZMKFFGER212-39-ZMKFFGER212-60mm-ZMKFF
98
n Standard load capacityn Narrow inner ring with spherical outer ringn Relubrication groove with oil hole on set
screw side(Shown)n Oil hole opposite groove makes it
interchangeable with allmanufacturers (shown)
n Non-relubricatable bearing available(omit “G” from bearing part number)
n Nylon patched class 3A set screws are standardn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Insert Bearings for UnitsFHS200-G / FHS200 Series Set Screw Locking
Insert BearingsFHSR200 Series Set Screw Locking
n Standard load capacityn Narrow inner ring with cylindrical outer ringn Non-relubricatable bearing is standard (shown)n Nylon patched class 3A set screws are standardn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
99
Sta
ndard
Mounte
d U
nits
1. FHSR series can be made with relubrication feature: Example: FHSR205-16G 2. Bearings also available with snap ring installed on the outer race. To order, add suffix ‘NR’: Example: FHSR205-16NR.
ds(UNF-Thread)
0.96924.60
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
0.1975.00
0.1774.50
0.1975.00
0.2857.24
0.2767.00
0.3117.90
0.3158.00
0.39410.00
0.39410.00
1/4-28x3/16M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
1.55539.50
1.71743.60
1.80745.90
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
Unit No.
0.0310.80
0.0591.50
0.0391.00
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
0.63016.00
0.68917.50
0.76819.50
0.82721.00
0.88622.50
1.06327.00
1.12228.50
1.28332.60
1.31533.40
889
1410
1610
2320
3150
3650
4150
4650
5850
2160
2900
3150
4370
5770
7340
7350
7880
9740
ShaftDiam. D Bi Be r n m G W
Dynamic
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)
FHS201 -8GFHS201 -12mmGFHS202 -9GFHS202 -10GFHS202 -15mmGFHS203 -11GFHS203 -17mmGFHS204 -12GFHS204 -13GFHS204 -20mmGFHS205 -12GFHS205 -13GFHS205 -14GFHS205 -15GFHS205 -16GFHS205 -25mmGFHS206 -17GFHS206 -18GFHS206 -19GFHS206 -20GFHS206 -30mmGFHS207 -20GFHS207 -21GFHS207 -22GFHS207 -23GFHS207 -35mmGFHS208 -24GFHS208 -25GFHS208 -40mmGFHS209 -26GFHS209 -27GFHS209 -28GFHS209 -45mmFHS210 -29GFHS210 -30GFHS210 -31GFHS210 -32GFHS210 -50mmGFHS211 -32GFHS211 -33GFHS211 -34GFHS211 -35GFHS211 -55mm
ds(UNF-Thread)
0.96924.60
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
0.1975.00
0.1774.50
0.1975.00
0.2857.24
0.2767.00
0.3117.90
0.3158.00
0.39410.00
0.39410.00
1/4-28x3/16M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
1.55539.50
1.71743.60
1.80745.90
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
0.0310.80
0.0591.50
0.0391.00
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
0.63016.00
0.68917.50
0.76819.50
0.82721.00
0.88622.50
1.06327.00
1.12228.50
1.28332.60
1.31533.40
889
1410
1610
2320
3150
3650
4150
4650
5850
2160
2900
3150
4370
5770
7340
7350
7880
9740
D Bi Be r n m G WDynamic
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mmFHSR206 -17FHSR206 -18FHSR206 -19FHSR206 -20FHSR206 -30mmFHSR207 -20FHSR207 -21FHSR207 -22FHSR207 -23FHSR207 -35mmFHSR208 -24FHSR208 -25FHSR208 -40mmFHSR209 -26FHSR209 -27FHSR209 -28FHSR209 -45mmFHSR210 -29FHSR210 -30FHSR210 -31FHSR210 -32FHSR210 -50mmFHSR211 -32FHSR211 -33FHSR211 -34FHSR211 -35FHSR211 -55mm
P78_100 new++ 2010.1.27 2:02 AM Page 96
Insert BearingsFHSR200 Series Set Screw Locking
■ Standard load capacity■ Narrow inner ring with cylindrical outer ring■ Non-relubricatable bearing is standard (shown)■ Nylon patched class 3A set screws are standard■ Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
99
Sta
ndard
Mounte
d U
nits
1. FHSR series can be made with relubrication feature: Example: FHSR205-16G 2. Bearings also available with snap ring installed on the outer race. To order, add suffix ‘NR’: Example: FHSR205-16NR.
ds(UNF-Thread)
0.96924.60
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
0.1975.00
0.1774.50
0.1975.00
0.2857.24
0.2767.00
0.3117.90
0.3158.00
0.39410.00
0.39410.00
1/4-28x3/16M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.88622.50
0.98425.00
1.06327.00
1.18130.00
1.26032.00
1.49638.00
1.55539.50
1.71743.60
1.80745.90
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162
50mm2
2 1/162 1/82 3/1655mm
0.0310.80
0.0591.50
0.0391.00
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
0.63016.00
0.68917.50
0.76819.50
0.82721.00
0.88622.50
1.06327.00
1.12228.50
1.28332.60
1.31533.40
889
1410
1610
2320
3150
3650
4150
4650
5850
2160
2900
3150
4370
5770
7340
7350
7880
9740
D Bi Be r n m G WDynamic
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
Unit No. ShaftDiam. Static
inmmDimensions
Load Rating (Lbs.)
FHSR201 -8FHSR201 -12mmFHSR202 -9FHSR202 -10FHSR202 -15mmFHSR203 -11FHSR203 -17mmFHSR204 -12FHSR204 -13FHSR204 -20mmFHSR205 -12FHSR205 -13FHSR205 -14FHSR205 -15FHSR205 -16FHSR205 -25mmFHSR206 -17FHSR206 -18FHSR206 -19FHSR206 -20FHSR206 -30mmFHSR207 -20FHSR207 -21FHSR207 -22FHSR207 -23FHSR207 -35mmFHSR208 -24FHSR208 -25FHSR208 -40mmFHSR209 -26FHSR209 -27FHSR209 -28FHSR209 -45mmFHSR210 -29FHSR210 -30FHSR210 -31FHSR210 -32FHSR210 -50mmFHSR211 -32FHSR211 -33FHSR211 -34FHSR211 -35FHSR211 -55mm
100
n Standard load capacityn Narrow inner ring with spherical outer ringn Relubrication groove with oil hole on lock-
ing collar side (shown)n Oil hole opposite groove makes it
interchangeable with allmanufacturers (shown)
n Non-relubricatable bearing available(omit “G” from bearing part number)
n Nylon patched class 3A set screw in collar isstandard
n Standard seal: RST tight riding,full cover, metal shroud seals
Optional seals: See page 85
Insert Bearings for UnitsFH200-G / FH200 Series Eccentric Locking Collar
Insert BearingsFHR200 Series Eccentric Locking Collar
n Standard load capacityn Narrow inner ring with cylindrical outer ringn Non-relubricatable bearing is standard (shown)n Nylon patched class 3A set screw is standard in
collarn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
101
Sta
ndard
Mounte
d U
nits
1. FHR series can be made with relubrication feature: Example: FHR205-16G2. Bearings also available with snap ring installed on the outer race. To order, add suffix ‘NR’: Example: FHR205-16NR
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.25
7/16-20x7/16M12xP1.25
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
1.1328.6
1.2231.0
1.2231.0
1.4135.7
1.5338.9
1.7243.7
1.7243.7
1.7243.7
1.9148.4
1.9449.3
0.75019.05
0.84321.41
0.84621.50
0.93823.82
1.00025.40
1.18830.18
1.18830.18
1.18830.18
1.28032.50
1.31933.50
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
1.06327.00
0.0310.80
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.531513.500
0.49412.55
0.54813.91
0.55114.00
0.58314.82
0.62615.90
0.75519.18
0.75519.18
0.75519.18
0.78720.00
0.78720.00
1.12628.60
1.26032.00
1.50038.10
1.75244.50
2.18955.60
2.37860.40
2.50063.50
2.75269.90
3.00076.20
3.31584.20
0.1975.00
0.1894.80
0.1894.80
0.2857.24
0.2566.50
0.2767.00
0.2767.00
0.2566.50
0.3158.00
0.3158.00
2160
2900
3150
4370
5770
7340
7350
7880
9740
11780
889
1410
1610
2320
3150
3650
4150
4650
5850
7250
0.5313.5
0.5313.5
0.5313.5
0.6315.9
0.6917.5
0.7218.3
0.7218.3
0.7218.3
0.8120.6
0.8822.3
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm
2 1/42 7/16
D L Bi BeUnit No. ShaftDiam.
FH201 -8GFH201 -12mmGFH202 -9GFH202 -10GFH202 -15mmGFH203 -11GFH203 -17mmGFH204 -12GFH204 -13GFH204 -20mmGFH205 -12GFH205 -13GFH205 -14GFH205 -15GFH205 -16GFH205 -25mmGFH206 -17GFH206 -18GFH206 -19GFH206 -20GFH206 -30mmGFH207 -20GFH207 -21GFH207 -22GFH207 -23GFH207 -35mmGFH208 -24GFH208 -25GFH208 -40mmGFH209 -26GFH209 -27GFH209 -28GFH209 -45mmGFH210 -29GFH210 -30GFH210 -31GFH210 -32GFH210 -50mmGFH211 -32GFH211 -33GFH211 -34GFH211 -35GFH211 -55mmGFH212 -36GFH212 -39G
inmmDimensions
Load Rating (Lbs.)
Dynamic Staticds
(UNF-Thread)GKWmnr
FHR201 -8FHR201 -12mmFHR202 -9FHR202 -10FHR202 -15mmFHR203 -11FHR203 -17mmFHR204 -12FHR204 -13FHR204 -20mmFHR205 -12FHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mmFHR206 -17FHR206 -18FHR206 -19FHR206 -20FHR206 -30mmFHR207 -20FHR207 -21FHR207 -22FHR207 -23FHR207 -35mmFHR208 -24FHR208 -25FHR208 -40mmFHR209 -26FHR209 -27FHR209 -28FHR209 -45mmFHR210 -29FHR210 -30FHR210 -31FHR210 -32FHR210 -50mmFHR211 -32FHR211 -33FHR211 -34FHR211 -35FHR211 -55mmFHR212 -36FHR212 -39
Unit No. ShaftDiam. D L Bi Be r n m W K G ds
(UNF-Thread)Load Rating (Lbs.)
Dynamic Static1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/8
1 3/161 1/4(s)30mm1 1/4
1 5/161 3/8
1 7/1635mm1 1/2
1 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 7/16
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.00
4.3307110.00
1.1328.6
1.2231.0
1.2231.0
1.4135.7
1.5338.9
1.7243.7
1.7243.7
1.7243.7
1.9148.4
1.9449.3
0.75019.05
0.84321.41
0.84621.50
0.93823.82
1.00025.40
1.18830.18
1.18830.18
1.18830.18
1.28032.50
1.31933.50
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
1.06327.00
0.0310.80
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.531513.500
0.49412.55
0.54813.91
0.55114.00
0.58314.82
0.62615.90
0.75519.18
0.75519.18
0.75519.18
0.78720.00
0.78720.00
1.12628.60
1.26032.00
1.50038.10
1.75244.50
2.18955.60
2.37860.40
2.50063.50
2.75269.90
3.00076.20
3.31584.20
0.5313.5
0.5313.5
0.5313.5
0.6315.9
0.6917.5
0.7218.3
0.7218.3
0.7218.3
0.8120.6
0.8822.3
0.1975.00
0.1894.80
0.1894.80
0.2857.24
0.2566.50
0.2767.00
0.2767.00
0.2566.50
0.3158.00
0.3158.00
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.25
7/16-20x7/16M12xP1.25
889
1410
1610
2320
3150
3650
4150
4650
5850
7250
2160
2900
3150
4370
5770
7340
7350
7880
9740
11780
P78_100 new++ 2010.1.27 2:02 AM Page 98
Insert BearingsFHR200 Series Eccentric Locking Collar
■ Standard load capacity■ Narrow inner ring with cylindrical outer ring■ Non-relubricatable bearing is standard (shown)■ Nylon patched class 3A set screw is standard in
collar■ Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
101
Sta
ndard
Mounte
d U
nits
1. FHR series can be made with relubrication feature: Example: FHR205-16G2. Bearings also available with snap ring installed on the outer race. To order, add suffix ‘NR’: Example: FHR205-16NR
inmmDimensions
FHR201 -8FHR201 -12mmFHR202 -9FHR202 -10FHR202 -15mmFHR203 -11FHR203 -17mmFHR204 -12FHR204 -13FHR204 -20mmFHR205 -12FHR205 -13FHR205 -14FHR205 -15FHR205 -16FHR205 -25mmFHR206 -17FHR206 -18FHR206 -19FHR206 -20FHR206 -30mmFHR207 -20FHR207 -21FHR207 -22FHR207 -23FHR207 -35mmFHR208 -24FHR208 -25FHR208 -40mmFHR209 -26FHR209 -27FHR209 -28FHR209 -45mmFHR210 -29FHR210 -30FHR210 -31FHR210 -32FHR210 -50mmFHR211 -32FHR211 -33FHR211 -34FHR211 -35FHR211 -55mmFHR212 -36FHR212 -39
Unit No. ShaftDiam. D L Bi Be r n m W K G ds
(UNF-Thread)Load Rating (Lbs.)
Dynamic Static1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm3/4
13/167/8
15/161
25mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 7/16
1.574840.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.00
4.3307110.00
1.1328.6
1.2231.0
1.2231.0
1.4135.7
1.5338.9
1.7243.7
1.7243.7
1.7243.7
1.9148.4
1.9449.3
0.75019.05
0.84321.41
0.84621.50
0.93823.82
1.00025.40
1.18830.18
1.18830.18
1.18830.18
1.28032.50
1.31933.50
0.51213.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
1.06327.00
0.0310.80
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.25596.500
0.29537.500
0.29537.500
0.35439.000
0.37409.500
0.433111.000
0.433111.000
0.433111.000
0.492112.500
0.531513.500
0.49412.55
0.54813.91
0.55114.00
0.58314.82
0.62615.90
0.75519.18
0.75519.18
0.75519.18
0.78720.00
0.78720.00
1.12628.60
1.26032.00
1.50038.10
1.75244.50
2.18955.60
2.37860.40
2.50063.50
2.75269.90
3.00076.20
3.31584.20
0.5313.5
0.5313.5
0.5313.5
0.6315.9
0.6917.5
0.7218.3
0.7218.3
0.7218.3
0.8120.6
0.8822.3
0.1975.00
0.1894.80
0.1894.80
0.2857.24
0.2566.50
0.2767.00
0.2767.00
0.2566.50
0.3158.00
0.3158.00
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
7/16-20x7/16M12xP1.25
7/16-20x7/16M12xP1.25
889
1410
1610
2320
3150
3650
4150
4650
5850
7250
2160
2900
3150
4370
5770
7340
7350
7880
9740
11780
102
n Lighter load capacity compared to FHR200 Series
n Narrow inner ringn Non-relubricatable bearingn Nylon patched class 3A set screw in
collar is standardn Standard seal: RST tight riding,
full cover, metal shroud seals
Optional seals: See page 85
Insert BearingsFHRL200 / FHL200 Series Eccentric Locking Collar
inmmDimensions
Cylindrical OD Unit No.
Spherical OD Unit No.
ShaftDiam. D L Bi
1/29/165/8
3/4
13/167/8
15/161
1 1/161 1/81 3/161 1/4
1.378035.000
1.653542.000
1.850447.000
2.165455.000
FHL201 -8FHL202 -9FHL202 -10
FHL6004 -12
FHL6005 -13FHL6005 -14FHL6005 -15FHL6005 -16FHL6006 -17FHL6006 -18FHL6006 -19FHL6006 -20
FHRL201 -8FHRL202 -9FHRL202 -10
FHRL6004 -12
FHRL6005 -13FHRL6005 -14FHRL6005 -15FHRL6005 -16FHRL6006 -17FHRL6006 -18FHRL6006 -19FHRL6006 -20
0.9424.0
0.9724.6
1.0025.4
1.0326.2
0.626015.900
0.657516.700
0.689017.500
0.720518.300
0.433111.000
0.472412.000
0.472412.000
0.511813.000
Be n
0.21655.500
0.23626.000
0.23626.000
0.25596.500
m W K
0.409410.400
0.421310.700
0.452811.500
0.464611.800
1.00025.40
1.17329.80
1.42136.10
1.67342.50
0.4411.1
0.4411.1
0.4711.9
0.4711.9
ds(UNF-Thread)
10-32x1/4
10-32x1/4
10-32x1/4
10-32x1/4
Load Rating (Lbs.)
Dynamic
1700
2320
2500
3350
680
1000
1120
1560
Static
P78_100 new++ 2010.1.27 2:02 AM Page 100
1
9
7
4
2
** Supplied withMobilgrease water/washresistant FM102 grease.FDA and USDA approvedfor incidental food contact(operating range: -10ºF to 220ºF)
setscrews
housing
bolt holes
balls
retainer
inner/outerring
8zerk & zerk hole
All Stainless Steel Units**Example: SSUCP205-161. Stainless steel AISI 440C2. Stainless steel AISI 440C3. Stainless steel AISI 3024. Stainless steel AISI 3025. FDA approved silicone rubber (-80Fº to 400Fº)6. Stainless steel AISI 3027. Solid base stainless steel AISI 3048. Stainless steel AISI 304
Thermoplastic Housings**With Stainless Steel Bearings Example: SUCP205-16-PBT1. Stainless steel AISI 440C2. Stainless steel AISI 440C3. Stainless steel AISI 3024. Stainless steel AISI 3025. FDA approved silicone rubber (-80Fº to 400Fº)6. Stainless steel AISI 3027. G.E. Valox® 420 glass filled PBT
(thermoplastic) solid base8. Stainless steel zerk and stainless steel lined
zerk hole for added strength9. Stainless steel bolt bushing for added strength
Thermoplastic Housings**With Zinc Chromate BearingsExample: ZUCP205-16-PBT1. Zinc chromate plated (4-6um thick) 52100 steel2. Stainless steel AISI 440C3. Stainless steel AISI 3024. Stainless steel AISI 3025. FDA approved silicone rubber (-80Fº to 400Fº)6. Stainless steel AISI 3027. G.E. Valox® 420 glass filled PBT (thermoplastic)
solid base8. Stainless steel zerk and stainless steel lined zerk
hole for added strength9. Stainless steel bolt bushing for added strength
Electroless Nickel Plated HousingsWith Black Oxide BearingsExample: UCP205-16-BENP1. Black oxide plated 52100 steel2. 52100 steel-grade 103. Stamped steel C10104. Black oxide plated steel5. Buna-N rubber bonded to steel shroud6. Black oxide plated steel7. Electroless nickel (.001” thick) plated
over cast or ductile iron8. Clear zinc plated steel zerkGrease: Shell Alvania RL2
6
5
slinger
seal
103
Corrosion Resistant Material Specifications
3
FDA-Seal
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
104
n For stainless steel grade specifications, see page 103
n Solid Base housing constructionn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)
n Standard seal: FDA approved silicone rubber seal protected by stainless steel slinger
inmmDimensions
1 1/238.0
1 1/238.0
1 1/238.0
1 7/848.0
1 7/848.0
2 1/854.0
2 1/854.0
2 3/860.0
2 3/860.0
2 3/470.0
1 5/1633.30
1 5/1633.30
1 7/1636.50
1 11/1642.90
1 7/847.60
1 15/1649.20
2 1/854.00
2 1/457.20
2 1/263.50
2 3/469.80
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm2
2 3/1655mm2 7/1660mm
Unit No.
3 3/495.0
3 3/495.0
4 1/8105.0
4 3/4121.0
5127.0
5 13/32137.0
5 3/4146.0
6 1/4159.0
6 23/32171.0
7 1/4184.0
1/213.0
1/213.0
1/213.0
21/3217.0
21/3217.0
21/3217.0
21/3217.0
25/3220.0
25/3220.0
25/3220.0
3/419.0
3/419.0
3/419.0
25/3220.0
25/3220.0
25/3220.0
25/3220.0
7/822.0
7/822.0
125.0
1/213.0
1/213.0
19/3215.0
21/3217.0
3/419.0
25/3220.0
25/3220.0
7/822.0
7/822.0
125.0
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
1.9449.20
2.0351.60
2.1955.60
2.5665.10
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mmSUC211 -32SUC211 -35SUC211 -55mmSUC212 -39SUC212 -60mm
SP-204-HA
SP-204-HA
SP-205-HA
SP-206-HA
SP-207-HA
SP-208-HA
SP-209-HA
SP-210-HT
SP-211-HT
SP-212-HT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
2 9/1665.0
2 9/1665.0
2 25/3271.0
3 5/1684.0
3 21/3293.0
3 27/3298.0
4 3/16106.0
4 31/64114.0
4 29/32125.0
5 7/16138.0
5127.0
5127.0
5 1/2140.0
6 1/2165.0
6 9/16167.0
7 1/4184.0
7 15/16190.0
8 1/8206.0
8 5/8219.0
9 1/2241.0
SSUCP201 -8SSUCP201 -12mmSSUCP202 -9SSUCP202 -10SSUCP202 -15mmSSUCP203 -11SSUCP203 -17mmSSUCP204 -12SSUCP204 -20mmSSUCP205 -14SSUCP205 -15SSUCP205 -16SSUCP205 -25mmSSUCP206 -18SSUCP206 -19SSUCP206 -20SSUCP206 -30mmSSUCP207 -20SSUCP207 -21SSUCP207 -22SSUCP207 -23SSUCP207 -35mmSSUCP208 -24SSUCP208 -40mmSSUCP209 -27SSUCP209 -28SSUCP209 -45mmSSUCP210 -31SSUCP210 -32SSUCP210 -50mmSSUCP211 -32SSUCP211 -35SSUCP211 -55mmSSUCP212 -39SSUCP212 -60mm
All Stainless Steel Pillow Block UnitsSSUCP200 Series Set Screw Locking
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
n For stainless steel grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)
n Standard seal: FDA approved silicone rubber seal protected by stainless steel slinger
105
All Stainless Steel Tapped Base Pillow Block UnitsSSUCPAS200 Series Set Screw Locking
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
ShaftDiam. h a e b S UNC w D Bi n m
BoltSizeIn.
Bearing No. Housing No.Unit No.
SSUCPAS201 -8SSUCPAS201 -12mmSSUCPAS202 -9SSUCPAS202 -10SSUCPAS202 -15mmSSUCPAS203 -11SSUCPAS203 -17mmSSUCPAS204 -12SSUCPAS204 -20mmSSUCPAS205 -14SSUCPAS205 -15SSUCPAS205 -16SSUCPAS205 -25mmSSUCPAS206 -18SSUCPAS206 -19SSUCPAS206 -20SSUCPAS206 -30mmSSUCPAS207 -20SSUCPAS207 -21SSUCPAS207 -22SSUCPAS207 -23SSUCPAS207 -35mmSSUCPAS208 -24SSUCPAS208 -40mmSSUCPAS209 -27SSUCPAS209 -28SSUCPAS209 -45mmSSUCPAS210 -31SSUCPAS210 -32SSUCPAS210 -50mm
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
2 1/854.0
2 1/457.2
2 7/873.0
2 7/873.0
376.2
4101.6
4 1/4108.0
4 39/64117.0
5127.0
5 1/2140.0
250.8
250.8
250.8
376.2
3 1/482.6
3 1/288.9
3 3/495.3
4101.6
1 1/238.0
1 1/238.0
1 1/238.0
1 1/238.0
1 57/6448.0
1 57/6448.0
250.8
250.8
3/8-16
3/8-16
3/8-16
7/16-14
1/2-13
1/2-13
1/2-13
5/8-11
2 9/1665.0
2 9/1665.0
2 51/6471.0
3 25/6486.0
3 3/495.0
3 15/16100.0
4 1/4108.0
4 39/64117.0
33/6413.0
33/6413.0
33/6413.0
5/816.0
3/419.0
3/419.0
3/419.0
55/6422.0
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
1.9449.20
2.0351.60
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.72018.30
0.72018.30
0.78019.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mm
SPAS-204-HT
SPAS-204-HT
SPAS-205-HT
SPAS-206-HT
SPAS-207-HT
SPAS-208-HT
SPAS-209-HT
SPAS-210-HT
106
n For stainless steel grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDAapproved)
n Standard seal: FDA approved silicone rubber seal protected by stainless steel slinger
All Stainless Steel Flange Units 4 BoltSSUCF200 Series Set Screw Locking
inmmDimensions
0.51213.00
0.59115.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
1.574840.000
1.850447.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
1/212mm9/165/8
15mm11/1617mm1/2
12mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm
Unit No. ShaftDiam. D Bi Be
1.02426.00
1.22031.00
1.22031.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
0.0391.00
0.0391.00
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.393710.000
0.500012.700
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.63016.00
0.72018.30
0.72018.30
0.77619.70
0.87422.20
1.00025.40
1.18930.20
mnr
0.1574.00
0.1975.00
0.1975.00
0.2175.50
0.2205.60
0.2526.40
0.3158.00
0.96924.60
1.13028.70
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
WG ds(UNF-Thread)
2160
2900
2900
3150
4370
5770
7340
1000
1410
1410
1610
2320
3150
3650
StaticDynamic
inmmDimensions
7/1611.0
7/1611.0
1/213.0
1/213.0
19/3215.0
19/3215.0
5/816.0
5/816.0
23/3218.0
23/3218.0
3 3/886.0
3 3/886.0
3 3/495.0
4 1/4108.0
4 19/32117.0
5 1/8130.0
5 13/32137.0
5 5/8143.0
6 3/8162.0
6 7/8175.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm2
2 3/1655mm2 7/1660mm
Unit No.
19/3215.0
19/3215.0
5/816.0
45/6418.0
3/419.0
53/6421.0
55/6422.0
55/6422.0
63/6425.0
1 9/6429.0
125.0
125.0
1 1/1627.0
1 7/3231.0
1 11/3234.0
1 13/3236.0
1 1/238.0
1 9/1640.0
1 11/1643.0
1 7/848.0
15/3212.0
15/3212.0
15/3212.0
15/3212.0
35/6414.0
5/816.0
5/816.0
5/816.0
3/419.0
3/419.0
1.3133.3
1.3133.3
1.4135.8
1.5840.2
1.7544.4
2.0251.2
2.0652.2
2.1554.6
2.3058.4
2.7068.7
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
0.7218.30
0.7218.30
0.7819.80
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
1.3133.40
1.5639.70
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC208 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mmSUC211 -32SUC211 -35SUC211 -55mmSUC212 -39SUC212 -60mm
SF-204-H
SF-204-H
SF-205-H
SF-206-H
SF-207-H
SF-208-H
SF-209-H
SF-210-H
SF-211-H
SF-212-H
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
7/16
1/2
1/2
1/2
5/8
5/8
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
2 1/264.0
2 1/264.0
2 3/470.0
3 1/483.0
3 5/892.0
4 1/64102.0
4 1/8105.0
4 3/8111.0
5 1/8130.0
5 5/8143.0
SSUCF201 -8SSUCF201 -12mmSSUCF202 -9SSUCF202 -10SSUCF202 -15mmSSUCF203 -11SSUCF203 -17mmSSUCF204 -12SSUCF204 -20mmSSUCF205 -14SSUCF205 -15SSUCF205 -16SSUCF205 -25mmSSUCF206 -18SSUCF206 -19SSUCF206 -20SSUCF206 -30mmSSUCF207 -20SSUCF207 -21SSUCF207 -22SSUCF207 -23SSUCF207 -35mmSSUCF208 -24SSUCF208 -40mmSSUCF209 -27SSUCF209 -28SSUCF209 -45mmSSUCF210 -31SSUCF210 -32SSUCF210 -50mmSSUCF211 -32SSUCF211 -35SSUCF211 -55mmSSUCF212 -39SSUCF212 -60mm
107
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
All Stainless Steel Units Flange Bracket 3 BoltSSUCFB200 Series Set Screw Locking
n For stainless steel grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved
silicone rubber seal protectedby stainless steel slinger
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
2 3/860.0
2 3/860.0
2 1/264.0
2 3/470.0
3 1/482.5
3 1/1678.0
3 5/3280.0
4 1/16102.0
4 1/4108.0
4 1/4108.0
4 3/4121.0
5 3/8137.0
6 9/64156.0
6 15/32164.0
6 27/64174.0
7 33/64191.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm
Unit No.
2 1/263.0
2 1/263.0
2 3/470.0
3 1/483.0
3 3/495.0
3 15/16100.0
4 11/64106.0
4 41/64118.0
5/816.0
5/816.0
21/3217.0
47/6419.0
53/6421.0
53/6421.0
53/6421.0
53/6421.0
125.4
125.4
1 1/829.0
1 1/432.0
1 29/6437.0
1 11/3234.0
1 11/3234.0
1 1/238.0
25/649.9
25/649.9
25/649.9
25/649.9
33/6413.1
15/3211.1
15/3211.1
33/6413.1
1 11/1642.9
1 11/1642.9
1 13/3246.0
2 1/1652.4
2 3/860.3
2 3/860.3
2 9/1665.0
2 15/1674.6
7/822.2
7/822.2
1 1/828.6
1 1/431.8
1 1/431.8
1 5/841.0
1 11/1642.9
1 5/841.3
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mm
SFB-204-HA
SFB-204-HA
SFB-205-HA
SFB-206-HA
SFB-207-HA
SFB-208-HA
SFB-209-HA
SFB-210-HA
ShaftDiam. w A b D i l s g h j
BoltSizeIn.
Bearing No. HousingNo.
5/16
5/16
5/16
5/16
7/16
3/8
3/8
7/16
5/168.0
5/168.0
3/89.5
3/89.5
17/3213.5
5/816.0
45/6418.0
33/6413.0
376.5
376.5
3 3/886.0
3 3/495.5
4 17/64108.5
4 1/2114.0
4 3/4121.0
5 3/16132.0
SSUCFB201 -8SSUCFB201 -12mmSSUCFB202 -9SSUCFB202 -10SSUCFB202 -15mmSSUCFB203 -11SSUCFB203 -17mmSSUCFB204 -12SSUCFB204 -20mmSSUCFB205 -14SSUCFB205 -15SSUCFB205 -16SSUCFB205 -25mmSSUCFB206 -18SSUCFB206 -19SSUCFB206 -20SSUCFB206 -30mmSSUCFB207 -20SSUCFB207 -21SSUCFB207 -22SSUCFB207 -23SSUCFB207 -35mmSSUCFB208 -24SSUCFB208 -40mmSSUCFB209 -27SSUCFB209 -28SSUCFB209 -45mmSSUCFB210 -31SSUCFB210 -32SSUCFB210 -50mm
e Z
1 1/238.1
1 1/238.1
1 5/841.3
1 7/847.6
250.8
250.8
2 1/854.0
2 3/469.9
1.3534.3
1.3534.3
1.4536.8
1.6241.2
1.8346.4
2.0251.2
2.0251.2
2.1153.6
108
n For stainless steel grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearingn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)
n Standard seal: FDA approved silicone rubber seal protected by stainless steel slinger
All Stainless Steel Flange Units 2 BoltSSUCFT200 Series Set Screw Locking
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
7/1611.0
7/1611.0
33/6413.0
33/6413.0
5/816.0
5/816.0
5/816.0
5/816.0
45/6418.0
45/6418.0
4 29/64113.0
4 29/64113.0
5 1/8130.0
5 53/64148.0
6 11/32161.0
6 57/64175.0
7 13/32188.0
7 3/4197.0
8 13/16224.0
9 27/32250.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm2
2 3/1655mm
2 7/1660m
Unit No.
19/3215.0
19/3215.0
5/816.0
45/6418.0
3/419.0
53/6421.0
55/6422.0
55/6422.0
63/6425.0
1 9/6429.0
125.4
125.4
1 1/1627.0
1 7/3231.0
1 11/3234.0
1 27/6436.0
1 1/238.0
1 37/6440.0
1 11/1643.0
1 57/6448.0
15/3212.0
15/3212.0
5/816.0
5/816.0
5/816.0
5/816.0
5/816.0
3/419.0
3/419.0
29/3223.0
2 23/3260.0
2 23/3260.0
2 43/6468.0
3 5/3280.0
3 35/6490.0
3 15/16100.0
4 1/4108.0
4 17/32115.0
5 1/8130.0
5 33/64140.0
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.87422.20
1.00025.40
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mmSUC211-32SUC211-35SUC211-55MM
SUC212-39SUC212-60MM
SFT-204-H
SFT-204-H
SFT-205-H
SFT-206-H
SFT-207-H
SFT-208-H
SFT-209-H
SFT-210-H
SFT-211-H
SFT-212-H
ShaftDiam. a e i g l s b Z Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
1.311033.300
1.311033.300
1.409435.800
1.582740.200
1.748044.400
2.015751.200
2.055152.200
2.149654.600
2.299258.400
2.704768.700
3 35/6490.0
3 35/6490.0
3 57/6499.0
4 39/64117.0
5 1/8130.0
5 43/64144.0
5 53/64148.0
6 3/16157.0
7 1/4184.0
7 61/64202.0
SSUCFT201 -8SSUCFT201 -12mmSSUCFT202 -9SSUCFT202 -10SSUCFT202 -15mmSSUCFT203 -11SSUCFT203 -17mmSSUCFT204 -12SSUCFT204 -20mmSSUCFT205 -14SSUCFT205 -15SSUCFT205 -16SSUCFT205 -25mmSSUCFT206 -18SSUCFT206 -19SSUCFT206 -20SSUCFT206 -30mmSSUCFT207 -20SSUCFT207 -21SSUCFT207 -22SSUCFT207 -23SSUCFT207 -35mmSSUCFT208 -24SSUCFT208 -40mmSSUCFT209 -27SSUCFT209 -28SSUCFT209 -45mmSSUCFT210 -31SSUCFT210 -32SSUCFT210 -50mmSSUCFT211-32SSUCFT211-35SSUCFT211-55mmSSUCFT212-39SSUCFT212-60mm
109
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
All Stainless Steel Bearing UnitsSSUCHA200 Series / SSUCT200 Series
n For stainless steel grade specifications, see page 103
n Wide inner ring bearingn Relubricatable unit with anti-
rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDAapproved)
n Standard seal: FDA approved siliconerubber seal protected by stainlesssteel slinger
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
2 33/6463.9
2 33/6463.9
2 33/6463.9
2 3/469.9
2 7/873.0
3 15/6482.2
3 17/6482.9
2 17/3264.3
3 1/1677.8
3 1/1677.8
3 5/892.1
3 25/3296.0
4 1/4108.0
4 21/32118.3
1/25/83/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm
Unit No.
00
00
00
00
5/642.0
13/645.2
13/645.2
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 9/1639.7
1 7/847.6
1 7/847.6
3/419.1
3/419.1
3/419.1
3/419.1
3/419.1
13/1620.6
13/1620.6
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-3/4
NPSM-1
NPSM-1
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.00
0.7218.30
0.7819.80
0.8722.20
1.0025.40
1.1930.20
1.1930.20
1.2832.60
SUC201 -8SUC202 -10SUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mm
SHA-204-H
SHA-205-H
SHA-206-H
SHA-207-H
SHA-208-H
SHA-209-H
SHA-210-H
ShaftDiam. a w c h l D K Bi n m Bearing No. Housing No.
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
3 25/3296.0
4 1/16103.2
4 1/16103.2
4 9/16115.9
4 3/4120.7
5 11/32135.7
5 19/32142.1
SSUCHA201 -8SSUCHA202 -10SSUCHA204 -12SSUCHA204 -20mmSSUCHA205 -14SSUCHA205 -15SSUCHA205 -16SSUCHA205 -25mmSSUCHA206 -18SSUCHA206 -19SSUCHA206 -20SSUCHA206 -30mmSSUCHA207 -20SSUCHA207 -21SSUCHA207 -22SSUCHA207 -23SSUCHA207 -35mmSSUCHA208 -24SSUCHA208 -40mmSSUCHA209 -27SSUCHA209 -28SSUCHA209 -45mmSSUCHA210 -31SSUCHA210 -32SSUCHA210 -50mm
All Stainless Steel Hanger Units SSUCHA Set Screw Locking
All Stainless Steel Take Up Units SSUCT200 Set Screw LockinginmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
5/815.9
5/815.9
5/815.9
5/815.9
3/419.1
3/419.1
3/419.1
1/25/83/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm
Unit No.
250.8
250.8
2 7/3256.4
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 9/3283.3
3/419.1
3/419.1
55/6421.8
55/6421.8
1 9/6429.0
1 9/6429.0
1 9/6429.0
250.8
250.8
2 1/457.2
2 17/3264.3
3 9/3283.3
3 9/3283.3
3 3/885.7
17/3213.5
17/3213.5
17/3213.5
17/3213.5
11/1617.5
11/1617.5
11/1617.5
3 1/288.9
3 1/288.9
4 1/32102.4
4 1/32102.4
4 1/2114.3
4 19/32116.7
4 19/32116.7
3 23/3294.4
3 13/1696.8
4 7/16112.8
5 1/16128.8
5 11/16144.5
5 11/16144.5
5 27/32148.4
SUC201 -8SUC202 -10SUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mm
ST-204-H
ST-205-H
ST-206-H
ST-207-H
ST-208-H
ST-209-H
ST-210-H
ShaftDiam. o g p q s b K e a w Bearing No. Housing
No.
376.2
376.2
3 1/288.9
3 1/288.9
4 1/64102.0
4 1/64102.0
4 1/64102.0
13/3210.3
13/3210.3
13/3210.3
1/212.7
5/815.9
5/815.9
5/815.9
SSUCT201 -8SSUCT202 -10SSUCT204 -12SSUCT205 -20mmSSUCT205 -14SSUCT205 -15SSUCT205 -16SSUCT205 -25mmSSUCT206 -18SSUCT206 -19SSUCT206 -20SSUCT206 -30mmSSUCT207 -20SSUCT207 -21SSUCT207 -22SSUCT207 -23SSUCT207 -35mmSSUCT208 -24SSUCT208 -40mmSSUCT209 -27SSUCT209 -28SSUCT209 -45mmSSUCT210 -31SSUCT210 -32SSUCT210 -50mm
j l
1 1/431.8
1 1/431.8
1 15/3237.3
1 15/3237.3
1 15/1649.2
1 15/1649.2
1 15/1649.2
13/1620.6
15/1623.8
1 3/3227.8
1 3/1630.2
1 5/1633.3
1 3/834.9
1 15/3237.3
r h
1 5/1633.3
1 3/834.9
1 11/1642.9
250.8
2 27/3256.4
2 1/457.2
2 5/1658.7
2 13/3261.1
2 7/1661.9
2 3/469.9
3 1/1677.8
3 15/3288.1
3 7/1687.3
3 17/3289.7
Bi
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
n
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.74819.00
0.74819.000
110
n For stainless steel, zinc and PBT grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone
rubber seal protected by stainless steel slinger
n End caps and open caps w/shaft seals available
Thermoplastic Pillow BlocksSUCP200-PBT Stainless Bearing / ZUCP200-PBT Zinc Plated Bearing
inmmDimensions
Unit No.
inmmDimensions
1 1/238.0
1 1/238.0
1 1/238.0
1 7/846.0
1 7/848.0
2 1/854.0
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
3 3/495.0
3 3/495.0
4 1/8105.0
4 11/16119.0
5127.0
5 3/8137.0
7/1611.0
7/1611.0
7/1611.0
17/3214.0
17/3214.0
17/3214.0
3 5/6414.0
3 5/6414.0
3 5/6414.0
2 3/3218.0
2 3/3218.0
2 3/3218.0
9/1614.2
9/1614.2
9/1614.5
11/1617.8
23/3218.0
25/3219.5
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
P-204-HA-PBT
P-204-HA-PBT
P-205-HA-PBT
P-206-HA-PBT
P-207-HA-PBT
P-208-HA-PBT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
7/16
1/2
1/2
2 9/1665.0
2 9/1665.0
2 3/471.0
3 9/3283.0
3 11/1694.0
3 15/1698.0
5127.0
5127.0
5 1/2140.0
6 3/8162.0
6 9/16167.0
7 1/4184.0
SUCP201 -8-PBTSUCP201 -12m-PBTSUCP202 -9-PBTSUCP202 -10-PBTSUCP202 -15m-PBTSUCP203 -11-PBTSUCP203 -17m-PBTSUCP204 -12-PBTSUCP204 -20m-PBTSUCP205 -14-PBTSUCP205 -15-PBTSUCP205 -16-PBTSUCP205 -25m-PBTSUCP206 -18-PBTSUCP206 -19-PBTSUCP206 -20-PBTSUCP206 -30m-PBTSUCP207 -20-PBTSUCP207 -21-PBTSUCP207 -22-PBTSUCP207 -23-PBTSUCP207 -35m-PBTSUCP208 -24-PBTSUCP208 -40m-PBT
SUCP200-PBT with Stainless Steel Insert Bearings
ZUCP200-PBT with Zinc Chromate Plated Insert BearingsinmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1 1/238.0
1 1/238.0
1 1/28
1 7/846.0
1 7/848.0
2 1/854.0
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/1615/16
125mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
3 3/495.0
3 3/495.0
4 1/8105.0
4 11/16119.0
5127.0
5 3/8137.0
7/1611.0
7/1611.0
7/1611.0
17/3214.0
17/3214.0
17/3214.0
17/3214.0
17/3214.0
17/3214.0
23/3218.0
23/3218.0
23/3218.0
17/3214.2
17/3214.2
9/1614.5
11/1617.8
23/3218.0
25/3219.5
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
P-204-HA-PBT
P-204-HA-PBT
P-205-HA-PBT
P-206-HA-PBT
P-207-HA-PBT
P-208-HA-PBT
ShaftDiam. h a e b s1 s2 g w Bi n
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
7/16
1/2
1/2
2 9/1665.0
2 9/1665.0
2 3/471.0
3 9/3283.0
3 11/1694.0
3 15/1698.0
5127.0
5127.0
5 1/2140.0
6 3/8162.0
6 9/16167.0
7 1/4184.0
ZUCP201 -8-PBTZUCP201 -12m-PBTZUCP202 -9-PBTZUCP202 -10-PBTZUCP202 -15m-PBTZUCP203 -11-PBTZUCP203 -17m-PBTZUCP204 -12-PBTZUCP204 -20m-PBTZUCP205 -14-PBTZUCP205 -15-PBTZUCP205 -16-PBTZUCP205 -25m-PBTZUCP206 -18-PBTZUCP206 -19-PBTZUCP206 -20-PBTZUCP206 -30m-PBTZUCP207 -20-PBTZUCP207 -21-PBTZUCP207 -22-PBTZUCP207 -23-PBTZUCP207 -35m-PBTZUCP208 -24-PBTZUCP208 -40m-PBT
Also available with black oxide plated insert. Part number example: UCP205-16-BPBT.
111
Tapped Base Pillow BlocksSUCPAS200-PBT Stainless Bearing / ZUCPAS200-PBT Zinc Plated Bearing
n For stainless steel, zinc and PBT grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved
silicone rubber seal protected by stainless steel slinger
n End caps and open caps w/ shaft seals available
Also available with black oxide plated insert. Part number example: UCPAS205-16-BPBT.
SUCPAS200-PBT with Stainless Steel Insert Bearings
ZUCPAS200-PBT with Zinc Chromate Plated Insert Bearings
inmmDimensions
Unit No.
inmmDimensions
1 1/238.1
1 1/238.1
1 1/238.1
1 1/238.1
1 7/848.0
1 7/848.0
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
250.8
250.8
250.8
376.2
3 1/482.6
3 1/288.9
3/8-16
3/8-16
3/8-16
7/16-14
1/2-13
1/2-13
2 19/3265.9
2 19/3265.9
2 7/872.0
4 3/8111.1
3 13/3296.0
4101.6
7/1611.1
7/1611.1
7/1612.0
11/1617.5
5/816.0
41/6416.0
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.72018.30
0.72018.30
0.78019.80
0.87422.20
1.00025.40
1.18930.20
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205-14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
PAS-204-HT-PBT
PAS-204-HT-PBT
PAS-205-HT-PBT
PAS-206-HT-PBT
PAS-207-HT-PBT
PAS-208-HT-PBT
ShaftDiam. h a e b S UNC w D Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
7/16
1/2
1/2
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
2 7/873.0
2 7/873.0
376.2
4101.6
4 3/8110.0
4 3/4120.0
SUCPAS201 -8-PBTSUCPAS201 -12m-PBTSUCPAS202 -9-PBTSUCPAS202 -10-PBTSUCPAS202 -15m-PBTSUCPAS203 -11-PBTSUCPAS203 -17m-PBTSUCPAS204 -12PBTSUCPAS204 -20m-PBTSUCPAS205 -14-PBTSUCPAS205 -15-PBTSUCPAS205 -16-PBTSUCPAS205 -25m-PBTSUCPAS206 -18-PBTSUCPAS206 -19-PBTSUCPAS206 -20-PBTSUCPAS206 -30m-PBTSUCPAS207 -20-PBTSUCPAS207 -21-PBTSUCPAS207 -22-PBTSUCPAS207 -23-PBTSUCPAS207 -35m-PBTSUCPAS208 -24-PBTSUCPAS208 -40m-PBT
inmmDimensions
Unit No.
inmmDimensions
1 1/238.1
1 1/238.1
1 1/238.1
1 1/238.1
1 7/848.0
1 7/848.0
1 5/1633.3
1 5/1633.3
1 7/1636.5
1 11/1642.9
1 7/847.6
1 15/1649.2
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
250.8
250.8
250.8
376.2
3 1/482.6
3 1/288.9
3/8-16
3/8-16
3/8-16
7/16-14
1/2-13
1/2-13
2 19/3265.9
2 19/3265.9
2 7/872.0
4 3/8111.1
3 13/3296.0
4101.6
7/1611.1
7/1611.1
7/1612.0
11/1617.5
5/816.0
41/6416.0
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.72018.30
0.72018.30
0.78019.80
0.87422.20
1.00025.40
1.18930.20
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
PAS-204-HT-PBT
PAS-204-HT-PBT
PAS-205-HT-PBT
PAS-206-HT-PBT
PAS-207-HT-PBT
PAS-208-HT-PBT
ShaftDiam. h a e b S UNC w D Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
7/16
1/2
1/2
1.2231.00
1.2231.00
1.3434.10
1.5038.10
1.6942.90
1.9449.20
2 7/873.0
2 7/873.0
376.2
4101.6
4 3/8110.0
4 3/4120.0
ZUCPAS201 -8-PBTZUCPAS201 -12m-PBTZUCPAS202 -9-PBTZUCPAS202 -10-PBTZUCPAS202 -15m-PBTZUCPAS203 -11-PBTZUCPAS203 -17m-PBTZUCPAS204 -12PBTZUCPAS204 -20m-PBTZUCPAS205 -14-PBTZUCPAS205 -15-PBTZUCPAS205 -16-PBTZUCPAS205 -25m-PBTZUCPAS206 -18-PBTZUCPAS206 -19-PBTZUCPAS206 -20-PBTZUCPAS206 -30m-PBTZUCPAS207 -20-PBTZUCPAS207 -21-PBTZUCPAS207 -22-PBTZUCPAS207 -23-PBTZUCPAS207 -35m-PBTZUCPAS208 -24-PBTZUCPAS208 -40m-PBT
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
112
n For stainless steel, zinc and PBT grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant Mobilgrease
FM102 (FDA/USDA approved)n Standard seal: FDA approved
silicone rubber seal protected by stainless steel slinger
n Base seals, end caps, and open caps w/shaft seals available
Thermoplastic Flange 4 BoltSUCF200-PBT Stainless Bearing / ZUCF200-PBT Zinc Plated Bearing
Also available with black oxide plated insert. Part number example: UCF205-16-BPBT
SUCF200-PBT with Stainless Steel Insert Bearings
ZUCF200-PBT with Zinc Chromate Plated Insert Bearings
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1/213.0
1/213.0
17/3214.0
17/3214.0
19/3215.0
21/3217.0
3 3/886.0
3 3/886.0
3 3/495.0
4 1/4107.0
4 5/8117.0
5 1/8130.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
0.59115.0
0.59115.0
.63016.0
.70918.0
.74819.0
.82721.0
1 1/828.0
1 1/828.0
1 3/1628.0
1 7/3231.0
1 5/1633.0
1 1/238.0
7/1611.0
7/1611.0
7/1611.0
7/1611.0
1/213.0
17/3214.0
1.311033.300
1.311033.300
1.409435.800
1.582740.200
1.748044.400
2.015751.200
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.7218.30
0.7218.30
0.7819.80
0.8722.20
1.0025.40
1.1930.20
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC205 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
F-204-H-PBT
F-204-H-PBT
F-205-H-PBT
F-206-H-PBT
F-207-H-PBT
F-208-H-PBT
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
2 1/263.5
2 1/263.5
2 3/470.0
3 1/483.0
3 5/892.0
4102.0
SUCF201 -8-PBTSUCF201 -12m-PBTSUCF202 -9-PBTSUCF202 -10-PBTSUCF202 -15m-PBTSUCF203 -11-PBTSUCF203 -17m-PBTSUCF204 -12-PBTSUCF204 -20m-PBTSUCF205 -14-PBTSUCF205 -15-PBTSUCF205 -16-PBTSUCF205 -25m-PBTSUCF206 -18-PBTSUCF206 -19-PBTSUCF206 -20-PBTSUCF206 -30m-PBTSUCF207 -20-PBTSUCF207 -21-PBTSUCF207 -22-PBTSUCF207 -23-PBTSUCF207 -35m-PBTSUCF208 -24-PBTSUCF208 -40m-PBT
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1/213.0
1/213.0
17/3214.0
17/3214.0
19/3215.0
21/3217.0
3 3/886.0
3 3/886.0
3 3/495.0
4 1/4107.0
4 5/8117.0
5 1/8130.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
0.59115.0
0.59115.0
.63016.0
.70918.0
.74819.0
.82721.0
1 1/828.0
1 1/828.0
1 3/1628.0
1 7/3231.0
1 5/1633.0
1 1/238.0
7/1611.0
7/1611.0
7/1611.0
7/1611.0
1/213.0
17/3214.0
1.311033.300
1.311033.300
1.409435.800
1.582740.200
1.748044.400
2.015751.200
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
0.7218.30
0.7218.30
0.7819.80
0.8722.20
1.0025.40
1.1930.20
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
F-204-H-PBT
F-204-H-PBT
F-205-H-PBT
F-206-H-PBT
F-207-H-PBT
F-208-H-PBT
ShaftDiam. a e i g l s Z Bi n m
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
2 1/263.5
2 1/263.5
2 3/470.0
3 1/483.0
3 5/892.0
4102.0
ZUCF201 -8-PBTZUCF201 -12m-PBTZUCF202 -9-PBTZUCF202 -10-PBTZUCF202 -15m-PBTZUCF203 -11-PBTZUCF203 -17m-PBTZUCF204 -12-PBTZUCF204 -20m-PBTZUCF205 -14-PBTSUCF205 -15-PBTZUCF205 -16-PBTZUCF205 -25m-PBTZUCF206 -18-PBTZUCF206 -19-PBTZUCF206 -20-PBTZUCF206 -30m-PBTZUCF207 -20-PBTZUCF207 -21-PBTZUCF207 -22-PBTZUCF207 -23-PBTZUCF207 -35m-PBTZUCF208 -24-PBTZUCF208 -40m-PBT
113
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
Thermoplastic Flange Bracket 3 BoltSUCFB200-PBT Stainless Bearing / ZUCFB200-PBT Zinc Plated Bearing
n For stainless steel, zinc and PBT grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant Mobilgrease
FM102 (FDA/USDA approved)n Standard seal: FDA approved
silicone rubber seal protected by stainless steel slinger
n Base seals, end caps, and open caps w/shaft seals available
Also available with black oxide plated insert. Part number example: UCFB205-16-BPBT
SUCFB200-PBT with Stainless Steel Insert Bearings
ZUCFB200-PBT with Zinc Chromate Plated Insert Bearings
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
2 3/860.3
2 3/860.3
2 45/6468.7
376.0
3 1/289.0
4 5/16109.5
4 5/16109.5
4 7/8123.8
5 3/8137.0
6 1/8156.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
2 3/860.3
2 3/860.3
2 45/6468.7
3 1/483.0
3 3/495.0
5/815.9
5/815.9
21/3216.7
3/419.0
53/6421.0
1 7/6428.2
1 7/6428.2
1 7/6428.2
1 1/432.0
1 7/1637.0
25/649.9
25/649.9
25/649.9
25/649.9
33/6413.1
7/822.2
7/822.2
1 1/828.6
1 1/431.8
1 1/431.8
1 1/238.1
1 1/238.1
1 5/841.3
1 7/847.6
250.8
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mm
FB-204-HA-PBT
FB-204-HA-PBT
FB-205-HA-PBT
FB-206-HA-PBT
FB-207-HA-PBT
ShaftDiam. w A b D i l s g h j
BoltSizeIn.
Bearing No. Housing No.
5/16
5/16
5/16
5/16
7/16
1 11/1642.9
1 11/1642.9
1 13/1646.0
2 1/1652.4
2 3/860.3
3 1/879.4
3 1/879.4
3 33/6489.5
3 5/1684.2
3 5/892.1
SUCFB201 -8-PBTSUCFB201 -12m-PBTSUCFB202 -9-PBTSUCFB202 -10-PBTSUCFB202 -15m-PBTSUCFB203 -11-PBTSUCFB203 -17m-PBTSUCFB204 -12-PBTSUCFB204 -20m-PBTSUCFB205 -14-PBTSUCFB205 -15-PBTSUCFB205 -16-PBTSUCFB205 -25m-PBTSUCFB206 -18-PBTSUCFB206 -19-PBTSUCFB206 -20-PBTSUCFB206 -30m-PBTSUCFB207 -20-PBTSUCFB207 -21-PBTSUCFB207 -22-PBTSUCFB207 -23-PBTSUCFB207 -35m-PBT
3/89.5
3/89.5
3/89.5
17/3213.0
41/6416.0
e Z
1.346534.200
1.346534.200
1.437036.500
1.622041.200
1.826846.400
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
2 3/860.3
2 3/860.3
2 45/6468.7
376.0
3 1/289.0
4 5/16109.5
4 5/16109.5
4 7/8123.8
5 3/8137.0
6 1/8156.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm
Unit No.
2 3/860.3
2 3/860.3
2 45/6468.7
3 1/483.0
3 3/495.0
5/815.9
5/815.9
21/3216.7
3/419.0
53/6421.0
1 7/6428.2
1 7/6428.2
1 7/6428.2
1 1/432.0
1 7/1637.0
25/649.9
25/649.9
25/649.9
25/649.9
33/6413.1
7/822.2
7/822.2
1 1/828.6
1 1/431.8
1 1/431.8
1 1/238.1
1 1/238.1
1 5/841.3
1 7/847.6
250.8
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mm
FB-204-HA-PBT
FB-204-HA-PBT
FB-205-HA-PBT
FB-206-HA-PBT
FB-207-HA-PBT
ShaftDiam. w A b D i l s g h j
BoltSizeIn.
Bearing No. Housing No.
5/16
5/16
5/16
5/16
7/16
1 11/1642.9
1 11/1642.9
1 13/1646.0
2 1/1652.4
2 3/860.3
3 1/879.4
3 1/879.4
3 33/6489.5
3 5/1684.2
3 5/892.1
ZUCFB201 -8-PBTZUCFB201 -12m-PBTZUCFB202 -9-PBTZUCFB202 -10-PBTZUCFB202 -15m-PBTZUCFB203 -11-PBTZUCFB203 -17m-PBTZUCFB204 -12-PBTZUCFB204 -20m-PBTZUCFB205 -14-PBTZUCFB205 -15-PBTZUCFB205 -16-PBTZUCFB205 -25m-PBTZUCFB206 -18-PBTZUCFB206 -19-PBTZUCFB206 -20-PBTZUCFB206 -30m-PBTZUCFB207 -20-PBTZUCFB207 -21-PBTZUCFB207 -22-PBTZUCFB207 -23-PBTZUCFB207 -35m-PBT
3/89.5
3/89.5
3/89.5
17/3213.0
41/6416.0
e Z
1.346534.200
1.346534.200
1.437036.500
1.622041.200
1.826846.400
114
Thermoplastic Flange 2 BoltSUCFT200-PBT Stainless Bearing / ZUCFT200-PBT Zinc Plated Bearings
ZUCFT200-PBT with Zinc Chromate Plated Insert Bearings
inmmDimensions
Unit No.
inmmDimensions
7/1612.0
7/1612.0
1/214.0
1/214.0
19/3216.0
25/3220.0
4 7/16113.0
4 7/16113.0
5 1/8130.0
5 13/16148.0
6 7/16163.0
6 7/8175.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
.59115.0
.59115.0
.63016.0
.70918.0
.74819.0
.82721.0
1 1/1626.5
1 1/1626.5
1 5/3229.5
1 7/3230.5
1 9/3232.8
1 15/3237.5
7/1611.0
7/1611.0
7/1611.0
7/1611.0
1/213.0
17/3214.0
2 3/864.0
2 3/864.0
2 11/1668.0
3 1/880.0
3 9/1690.0
3 15/16100.0
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
FT-204-H-PBT
FT-204-H-PBT
FT-205-H-PBT
FT-206-H-PBT
FT-207-H-PBT
FT-208-H-PBT
ShaftDiam. a e i g l s b Z Bi
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1.311033.300
1.311033.300
1.409435.800
1.582740.200
1.748044.400
2.015751.200
3 35/6490.0
3 35/6490.0
3 57/6499.0
4 39/64117.0
5 1/8130.0
5 43/64144.0
SUCFT201 -8-PBTSUCFT201 -12m-PBTSUCFT202 -9-PBTSUCFT202 -10-PBTSUCFT202 -15m-PBTSUCFT203 -11-PBTSUCFT203 -17m-PBTSUCFT204 -12-PBTSUCFT204 -20m-PBTSUCFT205 -14-PBTSUCFT205 -15-PBTSUCFT205 -16-PBTSUCFT205 -25m-PBTSUCFT206 -18-PBTSUCFT206 -19-PBTSUCFT206 -20-PBTSUCFT206 -30m-PBTSUCFT207 -20-PBTSUCFT207 -21-PBTSUCFT207 -22-PBTSUCFT207 -23-PBTSUCFT207 -35m-PBTSUCFT208 -24-PBTSUCFT208 -40m-PBT
SUCFT200-PBT with Stainless Steel Insert Bearings
n
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
inmmDimensions
Unit No. Bi Be mnr WG ds(UNF-Thread) StaticDynamic
inmmDimensions
7/1612.0
7/1612.0
1/214.0
1/214.0
19/3216.0
25/3220.0
4 7/16113.0
4 7/16113.0
5 1/8130.0
5 13/16148.0
6 7/16163.0
6 7/8175.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
Unit No.
.59115.0
.59115.0
.63016.0
.70918.0
.74819.0
.82721.0
1 1/1626.5
1 1/1626.5
1 5/3229.5
1 7/3230.5
1 9/3232.8
1 15/3237.5
7/1611.0
7/1611.0
7/1611.0
7/1611.0
1/213.0
17/3214.0
2 3/864.0
2 3/864.0
2 11/1668.0
3 1/880.0
3 9/1690.0
3 15/16100.0
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
FT-204-H-PBT
FT-204-H-PBT
FT-205-H-PBT
FT-206-H-PBT
FT-207-H-PBT
FT-208-H-PBT
ShaftDiam. a e i g l s b Z Bi
BoltSizeIn.
Bearing No. Housing No.
3/8
3/8
3/8
3/8
1/2
1/2
1.311033.300
1.311033.300
1.409435.800
1.582740.200
1.748044.400
2.015751.200
3 35/6490.0
3 35/6490.0
3 57/6499.0
4 39/64117.0
5 1/8130.0
5 43/64144.0
ZUCFT201 -8-PBTZUCFT201 -12m-PBTZUCFT202 -9-PBTZUCFT202 -10-PBTZUCFT202 -15m-PBTZUCFT203 -11-PBTZUCFT203 -17m-PBTZUCFT204 -12-PBTZUCFT204 -20m-PBTZUCFT205 -14-PBTZUCFT205 -15-PBTZUCFT205 -16-PBTZUCFT205 -25m-PBTZUCFT206 -18-PBTZUCFT206 -19-PBTZUCFT206 -20-PBTZUCFT206 -30m-PBTZUCFT207 -20-PBTZUCFT207 -21-PBTZUCFT207 -22-PBTZUCFT207 -23-PBTZUCFT207 -35m-PBTZUCFT208 -24-PBTZUCFT208 -40m-PBT
n
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
n For stainless steel, zinc and PBT grade specifications, see page 103
n Solid base housing constructionn Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant Mobilgrease
FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone
rubber seal protected by stainless steel slinger
n Base seals, end caps, and open caps w/shaft seals available
Also available with black oxide plated insert. Part number example: UCFT205-16-BPBT
115
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
Thermoplastic Take UpSUCT200-PBT Stainless Bearing / ZUCT200-PBT Zinc Plated Bearing
n For stainless steel, zinc and PBT grade specifications, see page 103
n Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone
rubber seal protected by stainless steel slinger
n End caps and open caps w/shaft seals available
Thermoplastic Hanger SUCHA200-PBT Stainless Bearing/ZUCHA200-PBT Zinc Plated Bearing
n For stainless steel, zinc and PBT grade specifications, see page 103
n Wide inner ring bearing with set screwsn Relubricatable unit with anti-rotation pinn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone
rubber seal protected by stainless steel slinger
n End caps and open caps w/shaft seals available
Also available with black oxide plated insert. Part number example: UCT205-16-BPBT or UCHA205-16-BPBT.
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
3 1/289.0
3 1/289.0
3 1/289.0
4 1/16103.2
4 1/16103.2
4 1/2114.3
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
StainlessUnit No.
15/3211.9
15/3211.9
15/3211.9
15/3211.9
15/3211.9
5/815.9
2 3/860.3
2 3/860.3
2 9/1665.1
2 3/469.9
3 3/1681.0
3 1/288.9
1 1/3226.2
1 1/3226.2
1 1/828.6
1 11/3234.1
1 19/3240.5
1 31/3250.0
1 7/847.6
1 7/847.6
1 7/847.6
2 1/457.2
2 11/1668.3
3 3/1681.0
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
T-204-H-PBT
T-204-H-PBT
T-205-H-PBT
T-206-H-PBT
T-207-H-PBT
T-208-H-PBT
ShaftDiam. a e k s h l b w j Bi Zinc
Bearing No. Housing No.
1 3/1630.2
1 3/1630.2
1 3/835.0
1 5/841.3
1 5/841.3
1 5/841.3
376.2
376.2
376.2
3 1/288.9
3 1/288.9
4 1/16103.2
SUCT201 -8-PBTSUCT201 -12m-PBTSUCT202 -9-PBTSUCT202 -10-PBTSUCT202 -15m-PBTSUCT203 -11-PBTSUCT203 -17m-PBTSUCT204 -12-PBTSUCT204 -20m-PBTSUCT205 -14-PBTSUCT205 -15-PBTSUCT205 -16-PBTSUCT205 -25m-PBTSUCT206 -18-PBTSUCT206 -19-PBTSUCT206 -20-PBTSUCT206 -30m-PBTSUCT207 -20-PBTSUCT207 -21-PBTSUCT207 -22-PBTSUCT207 -23-PBTSUCT207 -35m-PBTSUCT208 -24-PBTSUCT208 -40m-PBT
3 3/495.3
3 3/495.3
3 15/16100.0
4 1/2114.3
5 3/16131.8
5 11/16144.5
n StainlessBearing No.SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
ZincUnit No.
ZUCT201 -8-PBTZUCT201 -12m-PBTZUCT202 -9-PBTZUCT202 -10-PBTZUCT202 -15m-PBTZUCT203 -11-PBTZUCT203 -17m-PBTZUCT204 -12-PBTZUCT204 -20m-PBTZUCT205 -14-PBTZUCT205 -15-PBTZUCT205 -16-PBTZUCT205 -25m-PBTZUCT206 -18-PBTZUCT206 -19-PBTZUCT206 -20-PBTZUCT206 -30m-PBTZUCT207 -20-PBTZUCT207 -21-PBTZUCT207 -22-PBTZUCT207 -23-PBTZUCT207 -35m-PBTZUCT208 -24-PBTZUCT208 -40m-PBT
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
1 1/3226.2
1 1/3226.2
1 1/828.6
1 11/3234.1
1 19/3240.5
1 31/3250.0
2 15/1674.6
2 15/1674.6
2 15/1674.6
3 11/3284.9
3 9/1690.5
3 15/16100.0
1/212mm9/165/8
15mm11/1617mm3/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
StainlessUnit No.
2 3/860.3
2 3/860.3
2 9/1665.1
2 3/469.9
3 3/1681.0
3 1/288.9
1 3/1630.2
1 3/1630.2
1 3/835.0
1 5/841.3
1 5/841.3
1 5/841.3
1/2-13UNC
1/2-13UNC
1/2-13UNC
5/8-11UNC
5/8-11UNC
5/8-11UNC
1.22031.00
1.22031.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
ZUC201 -8ZUC201 -12mmZUC202 -9ZUC202 -10ZUC202 -15mmZUC203 -11ZUC203 -17mmZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mm
HA-204-H-PBT
HA-204-H-PBT
HA-205-H-PBT
HA-206-H-PBT
HA-207-H-PBT
HA-208-H-PBT
ShaftDiam. a W h l j K Bi n m Zinc
Bearing No. Housing No.
0.7218.30
0.7218.30
0.7819.80
0.8722.20
1.0025.40
1.1930.20
3 3/495.3
3 3/495.3
3 15/16100.0
4 1/2114.3
5 3/16131.8
5 11/16144.5
SUCHA201 -8-PBTSUCHA201 -12m-PBTSUCHA202 -9-PBTSUCHA202 -10-PBTSUCHA202 -15m-PBTSUCHA203 -11-PBTSUCHA203 -17m-PBTSUCHA204 -12-PBTSUCHA204 -20m-PBTSUCHA205 -14-PBTSUCHA205 -15-PBTSUCHA205 -16-PBTSUCHA205 -25m-PBTSUCHA206 -18-PBTSUCHA206 -19-PBTSUCHA206 -20-PBTSUCHA206 -30m-PBTSUCHA207 -20-PBTSUCHA207 -21-PBTSUCHA207 -22-PBTSUCHA207 -23-PBTSUCHA207 -35m-PBTSUCHA208 -24-PBTSUCHA208 -40m-PBT
0.50012.70
0.50012.70
0.56314.30
0.62615.90
0.68917.50
0.74819.00
StainlessBearing No.
SUC201 -8SUC201 -12mmSUC202 -9SUC202 -10SUC202 -15mmSUC203 -11SUC203 -17mmSUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mm
ZincUnit No.
ZUCHA201 -8-PBTZUCHA201 -12m-PBTZUCHA202 -9-PBTZUCHA202 -10-PBTZUCHA202 -15m-PBTZUCHA203 -11-PBTZUCHA203 -17m-PBTZUCHA204 -12-PBTZUCHA204 -20m-PBTZUCHA205 -14-PBTZUCHA205 -15-PBTZUCHA205 -16-PBTZUCHA205 -25m-PBTZUCHA206 -18-PBTZUCHA206 -19-PBTZUCHA206 -20-PBTZUCHA206 -30m-PBTZUCHA207 -20-PBTZUCHA207 -21-PBTZUCHA207 -22-PBTZUCHA207 -23-PBTZUCHA207 -35m-PBTZUCHA208 -24-PBTZUCHA208 -40m-PBT
116
With an eye toward economy in addition to contamination resistance, thesePEER units are designed with black oxide inserts and electroless nickel platedhousings. The results are mounted ball bearing units ideal for applicationsrequiring corrosion resistance superior to the protection afforded by conven-tional painted cast or ductile iron housings.
n Housings plated with .001” thick electroless, high phosphorous (+10%) nickel.
n Electroless nickel plated over premium (Grade 30) cast iron or high strength65-45-12 ductile iron.
n Bearing available in all standard locking devices:set screw, eccentric locking collars or premium
GRIP-IT locking collars.
n Black oxide bearings designed withslingers and full contact metal shroudseals for maximum protection.
n Castings available in any style listed inthe PEER catalog.
n Black oxide bearings are available in allcommon inch and metric shaft sizes.
Electroless Nickel plated...for moderate contamination conditions
n For stainless steel grade specifications, see page 103
n Wide inner ring with spherical outer ringn Relubrication groove with oil hole on set
screw siden Anti-rotation pin on side opposite grease grooven Supplied with water/wash resistant Mobilgrease
FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone rubber
seal protected by stainless steel slinger
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
0.66917.00
0.66917.00
0.74819.00
0.78720.00
0.82721.00
0.86622.00
0.94524.00
0.98425.00
1.06327.00
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
1/25/83/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm2
2 3/1655mm2 7/1660mm
Unit No.
1.22131.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03251.60
2.18955.60
2.56365.10
0.0391.00
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
0.72118.30
0.78019.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28432.60
1.31533.40
1.56339.70
1/4-28x1/4M6xP.75x1/4
1/4-28x1/4M6xP.75
1/4-28x1/4M6xP.75
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
2320
2520
3496
4616
5872
5880
6304
7792
9424
ShaftDiam. D Bi Be r n m G ds (UnF-
Thread) Dynamic Static
0.1975.00
0.1975.00
0.1975.00
0.2366.00
0.3158.00
0.3158.00
0.39410.00
0.39410.00
0.39410.00
SUC201 -8SUC202 -10SUC204 -12SUC204 -20mmSUC205 -14SUC205 -15SUC205 -16SUC205 -25mmSUC206 -18SUC206 -19SUC206 -20SUC206 -30mmSUC207 -20SUC207 -21SUC207 -22SUC207 -23SUC207 -35mmSUC208 -24SUC208 -40mmSUC209 -27SUC209 -28SUC209 -45mmSUC210 -31SUC210 -32SUC210 -50mmSUC211 -32SUC211 -35SUC211 -55mmSUC212 -39SUC212 -60mm
1128
1288
1856
2520
2920
3320
3720
4680
5800
Load Rating (Lbs.)
117
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
Stainless Steel Insert Bearings for UnitsSUC200 Series Set Screw Locking
118
Zinc Chromate Plated Insert Bearings for UnitsZUC200 Series Set Screw Locking
n For zinc chromate insert grade specifications, see page 103
n Wide inner ring with spherical outer ringn Relubrication groove with oil hole on set
screw siden Anti-rotation pin on side opposite grease grooven Supplied with water/wash resistant Mobilgrease
FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone rubber
seal protected by stainless steel slinger
inmmDimensions
Unit No.
inmmDimensions
0.66917.00
0.66917.00
0.74819.00
0.78720.00
0.82721.00
0.86622.00
0.94524.00
0.98425.00
1.06327.00
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
1/25/83/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162(s)
50mm2
2 3/1655mm2 7/1660mm
Unit No.
1.22131.00
1.34334.10
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03251.60
2.18955.60
2.56365.10
0.0391.00
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
0.72118.30
0.78019.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28432.60
1.31533.40
1.56339.70
1/4-28x1/4M6xP.75x1/4
1/4-28x1/4M6xP.75
1/4-28x1/4M6xP.75
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
2900
3150
4370
5770
7340
7350
7880
9740
11780
Dynamic Static
0.1975.00
0.1975.00
0.1975.00
0.2366.00
0.3158.00
0.3158.00
0.39410.00
0.39410.00
0.39410.00
ZUC201 -8ZUC202 -10ZUC204 -12ZUC204 -20mmZUC205 -14ZUC205 -15ZUC205 -16ZUC205 -25mmZUC206 -18ZUC206 -19ZUC206 -20ZUC206 -30mmZUC207 -20ZUC207 -21ZUC207 -22ZUC207 -23ZUC207 -35mmZUC208 -24ZUC208 -40mmZUC209 -27ZUC209 -28ZUC209 -45mmZUC210 -31ZUC210 -32ZUC210 -50mmZUC211 -32ZUC211 -35ZUC211 -55mmZUC212 -39ZUC212 -60mm
1410
1610
2320
3150
3650
4150
4650
5850
7250
Load Rating (Lbs.)ShaftDiam. D Bi Be r n m G ds
(UNF-Thread)
119
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
n For black oxide bearing specifications, see page 103
n Wide inner ring with spherical outer ringn Relubrication groove with oil hole on set
screw siden Anti-rotation pin on side opposite
grease grooven Nylon patched class 3A set screws are standardn Standard seal: R-Seal
Triple lip seal and other options: See page 85
Black Oxide Plated Insert Bearings for UnitsUC200-BLK Series Set Screw Locking
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
0.0391.00
0.0591.50
0.0591.50
0.0591.50
0.0792.00
0.0792.00
0.0792.00
0.0792.00
0.0982.50
0.0982.50
1.850447.000
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
1/212mm9/165/8
15mm11/1617mm3/4
13/1620mm13/16
7/815/16
125mm1 1/161 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/21 9/1640mm1 5/8
1 11/161 3/445mm
1 13/161 7/8
1 15/162(s)
50mm2
2 1/162 1/82 3/1655mm2 1/42 5/162 3/82 7/1660mm
Unit No.
0.59115.00
0.59115.00
0.59115.00
0.70918.00
0.74819.00
0.86622.00
0.86622.00
0.86622.00
0.98425.00
1.06327.00
0.500012.700
0.500012.700
0.563014.300
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
0.720518.300
0.720518.300
0.775619.700
0.874022.200
1.000025.400
1.189030.200
1.189030.200
1.283532.600
1.315033.400
1.563039.700
0.1975.00
0.1975.00
0.2175.50
0.2215.60
0.2526.40
0.3158.00
0.3158.00
0.3749.50
0.3749.50
0.43711.10
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
1/4-28x1/4M6xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
5/16-24x5/16M8xP1.0
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
3/8-24x3/8M10xP1.25
2900
2900
3150
4370
5770
7340
7350
7880
9740
11780
ShaftDiam. D Bi Be r n m G W ds (UnF-
Thread) Dynamic Static
1.13028.70
1.13028.70
1.32733.70
1.56739.80
1.84346.80
2.06752.50
2.25657.30
2.44562.10
2.75670.00
3.03177.00
1.22131.00
1.22131.00
1.33934.00
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03251.60
2.18955.60
2.56365.10
UC201 -8-BLKUC201 -12mm-BLKUC202 -9-BLKUC202 -10-BLKUC202 -15mm-BLKUC203 -11-BLKUC203 -17mm-BLKUC204 -12-BLKUC204 -13-BLKUC204 -20mm-BLKUC205 -13-BLKUC205 -14-BLKUC205 -15-BLKUC205 -16-BLKUC205 -25mm-BLKUC206 -17-BLKUC206 -18-BLKUC206 -19-BLKUC206 -20-BLKUC206 -30mm-BLKUC207 -20-BLKUC207 -21-BLKUC207 -22-BLKUC207 -23-BLKUC207 -35mm-BLKUC208 -24-BLKUC208 -25-BLKUC208 -40mm-BLKUC209 -26-BLKUC209 -27-BLKUC209 -28-BLKUC209 -45mm-BLKUC210 -29-BLKUC210 -30-BLKUC210 -31-BLKUC210 -32-BLKUC210 -50mm-BLKUC211 -32-BLKUC211 -33-BLKUC211 -34-BLKUC211 -35-BLKUC211 -55mm-BLKUC212 -36-BLKUC212 -37-BLKUC212 -38-BLKUC212 -39-BLKUC212 -60mm-BLK
1410
1410
1610
2320
3150
3650
4150
4650
5850
7250
Load Rating (Lbs.)
120
n For stainless steel or zinc chromate insertgrade specifications, see page 103
n Set screw lockingn Wide inner ring with cylindrical outer ring
and snap ringn Relubrication groove with oil hole on side
opposite of set screwsn Supplied with water/wash resistant
Mobilgrease FM102 (FDA/USDA approved)n Standard seal: FDA approved silicone
rubber seal protected by stainless steel slinger
Stainless Steel or Zinc Plated Insert BearingsSSER Stainless Steel / ZSER Zinc Chromate Plated Series
inmmDimensions
Unit No. ShaftDiam. D Bi Be mnr WG ds
(UNF-Thread) StaticDynamic
inmmDimensions
0.452811.500
0.515713.100
0.626015.900
0.689017.500
0.748019.000
0.748019.000
0.748019.000
0.874022.200
1.000025.400
1.850447.000
2.047252.000
2.440962.000
2.834672.000
3.149680.000
3.346585.000
3.543390.000
3.9370100.000
4.3307110.000
1/25/83/4
20mm7/8
15/161
25mm1 1/81 3/16
1 1/4(s)30mm1 1/41 5/161 3/81 7/1635mm1 1/240mm
1 11/161 3/445mm
1 15/162
50mm2
2 3/1655mm2 7/1660mm
StainlessUnit No.
0.62615.90
0.75219.10
0.87422.20
0.93723.80
1.09427.80
1.09427.80
1.12628.60
1.18930.20
1.25231.80
0.76819.50
0.85821.80
0.87422.20
1.00025.40
1.18930.20
1.18930.20
1.28332.60
1.31533.40
1.56339.70
0.4912.37
0.6115.57
0.6817.37
0.7518.97
0.9022.97
0.9022.97
0.9123.01
0.9724.61
1.0326.21
0.1574.00
0.2055.20
0.2205.60
0.2205.60
0.2526.40
0.2526.40
0.2957.50
0.2957.50
0.2957.50
0.1975.00
0.2175.50
0.2175.50
0.2566.50
0.3158.00
0.3158.00
0.3549.00
0.3549.00
0.41310.50
2.0752.70
2.2857.90
2.6767.70
3.0978.60
3.4186.60
3.6191.60
3.8096.50
4.19106.50
4.59116.60
2320
2520
3496
4616
5872
5880
6304
7792
9424
1128
1288
1856
2520
2920
3320
3720
4680
5800
ShaftDiam. D Bi Be n m E o T J G
Dynamic Static
0.102.46
0.102.46
0.133.18
0.133.18
0.133.18
0.133.18
0.133.18
0.133.18
0.133.18
1.22031.00
1.37434.90
1.50038.10
1.68942.90
1.93749.20
1.93749.20
2.03151.60
2.18955.60
2.56365.10
SSER -8SSER -10SSER -12SSER -20mmSSER -14SSER -15SSER -16SSER -25mmSSER -18SSER -19SSER -20SSER -30mmSSER -20SSER -21SSER -22SSER -23SSER -35mmSSER -24SSER -40mmSSER -27SSER -28SSER -45mmSSER -31SSER -32SSER -50mmSSER -32SSER -35SSER -55mmSSER -39SSER -60mm
0.041.07
0.041.07
0.061.65
0.061.65
0.061.65
0.061.65
0.092.41
0.092.41
0.092.41
Y ds (UNF-Thread)
1/4-28x1/4M6X0.75
1/4-28x1/4M6X0.75
1/4-28x1/4M6X0.75
5/16-24x5-16M8X1
5/16-24x5-16M8X1
5/16-24x5-16M8X1
3/8-24x3/8M10X1.25
3/8-24x3/8M10X1.25
3/8-24x3/8M10X1.25
ZincUnit No.
ZSER -8ZSER -10ZSER -12ZSER -20mmZSER -14ZSER -15ZSER -16ZSER -25mmZSER -18ZSER -19ZSER -20ZSER -30mmZSER -20ZSER -21ZSER -22ZSER -23ZSER -35mmZSER -24ZSER -40mmZSER -27ZSER -28ZSER -45mmZSER -31ZSER -32ZSER -50mmZSER -32ZSER -35ZSER -55mmZSER -39ZSER -60mm
X
0.5915.08
0.6215.78
0.6315.93
0.7218.32
0.8321.10
0.8321.10
0.9423.84
0.9423.84
1.1629.40
Load Rating (Lbs.)
121
Sta
ndard
Mounte
d U
nits
Wash D
ow
nUnits
Chemical Resistance Tables
Engineering Data
122
Drilled & Tapped Zerk Fitting Hole
Precision Ground & Super-Finished Raceways
Grade 10 Balls
High Grade Cast Iron Housings
Steel Slinger OverRST Tight Riding, Full Cover,Metal Shroud Seal
Rivited, Steel Retainer
Nylon Patched, Class 3A Set Screws
Sold Base Housing Design
A. Construction and features of ball bearing mounted units.
PEER mounted ball bearing units consist of a double sealed, single row, deep groove ball bearing and any one of many types of housings. The outer ring of the self-contained ball bearing is ground to a sphere along with the matching bore of the corresponding housing to provide self alignment capabilities. Cylindrical outer ring ball bearings are also available.
A. Figure 1 shows a cut away view of a standard 2-Bolt flange with set screw locking (UC series shown).
B. Figure 2 shows a cut away view of a standard pillow block housing with an eccentric locking collar bearing (HC Series shown).
C. Figure 3 shows a cut away view of a standard pillow block housing with a Grip-It locking bearing (GR Series).
B. Typical features of PEER ball bearing mounted units.
(1) Internal construction of single row deep groove bearings in mounted units.The ball bearings used in mounted units are quite similar to the 6200 and 6300 series of single row, deep groove, radial ball bearings. These bearings aredesigned to operate under radial and to a lesser degree thrust loads and combined loads. They have considerably greater load carrying capacity than double row, self aligning bearings used in some other types of mounted units.
(2) Bearing materials.52100 Bearing Grade Steel.PEER bearings inner ring, outer ring and balls are made of 52100 vacuum degassed steel. This high quality steel coupled with precision grinding and super finishing techniques increases bearing life and reduces bearing noise.
Stainless SteelPEER Bearing Company’s line of stainless steel bearings are designed to meet the demanding requirements of the FDA and USDA where wash-down and corrosionresistance are necessary. The full stainless steel bearings provide contamination and corrosion protection for long life.
Component MaterialRings Grade 440 Stainless SteelBalls Grade 440 Stainless SteelRetainer Grade 304 Stainless SteelSlingers Grade 304 Stainless SteelSet Screws Grade 304 Stainless SteelSeals Silicone (Si)Grease FDA Approved.
(3) Seals used on standard 52100 bearings. (See representative drawings on page 85)PEER offers a multitude of bearing seal designs allowing users to select the one that is best suitable for their particular application.a) The most common seal design is the PEER “R” seal. This incorporates a full shroud contact seal with rubber lip and slinger assuring positive dirt exclusion.
The inboard contact seal is staked securely to the outer ring and the curved Buna-N rubber lip seals along the outside of the inner ring. The metal slinger isattached to the outside of the inner ring creating a complex path for contaminants to enter the bearing.
b) The PEER “RST” seal is similar to the contact seal used in the “R” seal design but without the slinger. It has a full cover shroud and positive rubber lip contact to the inner ring.
c) The PEER “TRL” triple lip seals are full cover shroud style with three individual wiping lips for the most complete protection against contaminants.
Engineering Data
123
Engin
eerin
g
Figure 1
Figure 2
Figure 3
Engineering Data
124
d) The PEER “DBL” double lip seals are full cover shroud style with two distinct rubber wiping lips. These are useful where additional protection is neededbut high RPM’s will not allow for the extra torque they require.
e) The PEER “Z” seal is a full cover shroud non-contact shield used where high RPM’s and the need for a free spinning bearing are present. Available with slinger on wide inner ring bearings.
(3a) Seals used on Stainless Steel bearings.PEER Stainless steel bearings incorporate silicone rubber seals in compliance with FDA guidelines. Stainless steel slingers are also available on wide innerring stainless steel bearings.
Seal Materials Comparison:BASE POLYMER NITRILE SILICONE FLUOROELASTOMERMaterial Code NBR Si Viton
Temperature Range -40 F ~ 250 F -80 F ~ 400 F -30 F ~ 400 F(-35 C ~ 120 C) (-60 C ~ 200 C) (-35 C ~ 200 C)
Oil Resistance E G EAcid Resistance G F EAlkali Resistance G X FWater Resistance G G GHeat Resistance G E ECold Resistance G E FWear Resistance E G EOzone Resistance G E E
E=Execllent G=Good F=Fair X=Not Recommended
(4) Locking Mechanisms.PEER offers 3 distinct methods of locking the bearing to the shaft.a) Set Screw Locking This incorporates two class 3 set screws with nylon patch spaced 62 degrees apart in the inner ringextension. The areas around the set screws are high frequency annealed to allow the use of largerdiameter set screws further increasing their effectiveness. The addition of a nylon patch to the setscrews prevents their backing out under high vibration situations. See Photo A
b) Eccentric Locking CollarThe PEER eccentric locking collars are designed for use in applications where the shafts rotate in a sin-gle direction. They incorporate a matching eccentricity between the inner ring and locking collar. A radiused area in both the collar and inner ring where the eccentricity begins is instrumental in preventing cracks in this high stress area. Matching angles between the inner ring and locking collarprovide optimal contact and security. PEER locking collars come standard with class 3 nylon patchedset screws. See photo B
c) “GR” Series lockingThe PEER “GR” series or ‘Grip It’ locking design uses a concentric split collar which assembles over sixsplit wedges of the inner ring. When the collar is tightened it forces the inner ring to grip the shaftcreating a concentric bearing to shaft lock. In addition, there is no damage to the shaft from setscrews which eliminates shaft refinishing after disassembly or replacement. High strength Torx drivecap screws provide maximum clamping force. See photo C
Photo B
Photo A
Photo C
Engineering Data
125
Engin
eerin
g
(5) Housings.(a) Cast Iron. One piece cast iron housings provide solid construction and maximum wear resistance. Machined mounting surfaces and bearing seat insure
proper mounting heights and bearing to housing alignment values. Cast or machined bolt holes make PEER interchangeable with most competitors. (b) Ductile Iron. One piece ductile or malleable iron housings are made to the same exacting standards as the PEER cast iron housings with the addition of
higher tensile strength values.(c) Nickel Plating. For applications in the food, chemical and where added corrosion protection is needed, Cast iron and ductile housings are available with
high phosphorous electroless nickel plating. (d) Stamped Steel. PEER offers a wide variety of stamped steel housings of various thicknesses for light load applications.
These stampings are available in a wide variety of finishes such as zinc plated, yellow dichromate, black electroless or raw.(e) Thermoplastic Housings. PEER polymer housings are made of FDA recognized material and incorporate solid bases and stainless steel bolt inserts and
grease fittings. When combined with PEER stainless steel or black oxide insert bearings, they are extremely resistant to corrosion and suited for use inwashdown applications.
(f) Rubber Insulators. PEER Nitrile rubber insulators provide insulation and noise reduction properties. The conductive rubber interliners are available for usewith most styles of stamped steel housings.
(g) Stainless Steel. PEER stainless steel housings are made of series 304 stainless steel and incorporate series 300 stainless steel grease fittings. Solid mounting surfaces make them ideally suited for food and chemical applications. These housings incorporate all the same machined features as our cast and ductile housings such as bearing seat, bolt holes and consistent mounting heights.
(6) Self Alignment.The outer rings of PEER insert bearings are spherically ground to correspond with a matching spherical bearing seat on Peer housings. This spherical combination provides self-alignment features, which compensate for alignment errors, uneven mounting surfaces and shaft flexing.Misalignment of up to 5 degrees for non-relube units and 1.5 degrees for relube units is possible.
(7) Anti-rotation device.The use of an anti-rotation pin in the outer ring prevents the bearing outer ring from turning in the housing. Located in the housing loading slot, this feature does not interfere with the self-aligning capability of the assembly. The anti-rotation pin is standard on wide inner ring bearings and an available option on flush back inner ring bearings.
(8) Interchangeability of bearings in housings.PEER mounted units offer complete interchangeability of self-contained insert bearings in housings. This allows easy replacement of bearings in the field.
(9) Serviceability of assemblies.PEER bearings are pre-lubricated with specially selected greases at the factory. Bearings and housings are available in a relubricable and non-relubricable version. Specialty greases and fill amounts are readily available. Relube fittings on Peer housings are available in a wide variety of styles and sizes.
(10) Handling of bearings.Sealed bearings used in mounted units are packaged to prevent contamination of grease and damage during shipping and handling. To protect bearings and assemblies during storage, it is recommended all components remain intact. Locking collars, grease fittingsand dust caps are matched to provide the optimum performance.
Engineering Data
126
C. Tolerances1. Tolerances for bearings.1.1 Tolerances for inner ring.
Table 1: Tolerances on inner rings of insert bearings with cylindrical bore.
Table 1a: Bearing IR Tolerances Stainless steel bearings
Note: dm is defined as the arithmetical mean of the largest and the smallest diameter obtained by two point measurements.
Unit: 0.001mm
Engineering Data
127
Engin
eerin
g
1.2 Tolerances for outer rings.Table 2: tolerances on outer rings
Note:1. dm is defined as arithmetical mean of the largest and smallest diameter obtained by two point measurements.2. The low deviation of outside diameter dm does not apply within the distance of 1/4 the width of outer ring from the side.
Table 2a: Bearing OR Tolerances Stainless Steel bearings
Note: dm is defined as the arithmetical mean of the largest and the smallest diameter obtained by two point measurements.
Unit: 0.001mm(0.0001 in)
Unit: 0.001mm
Engineering Data
128
2. Tolerances for cast iron housings.2.1 Tolerances for spherical inner diameter of housings
Table 3. Tolerances for spherical inner diameter of housings And resultant fits.
Table 3a: Housing Tolerances (Thermoplastic PBT)
Pillow Block (P200-PBT) and 2-Bolt flange (FT200-PBT) shown
Table 3b: Thermoplastic Housing Properties:
D1m is defined as the arithmetical mean of the largest and the smallest diameter obtained by two point measurements.
Engineering Data
129
Engin
eerin
g
2.2 Tolerances for pillow block housings.Table 4. Tolerances for “h” dimension for ductile and cast iron pillow block housings.
Note: h = height of mounting surface to shaft centerline
2.3 Tolerances for flange unit housings.Table 5: tolerances for “e” dimension of ductile and cast iron flange unit housings.
Note: 1) e = bolt holes centerline dimension.
Engineering Data
130
2.4 Tolerances for machined back (Piloted) flange unit housings. (FC)Table 6: Machined back flange unit housings (FC)
Note: 1) e = bolt holes centerline dimensions.2) i = bearing centerline distance from mounting surface.3) f = outside diameter of spigot joint.
Engineering Data
131
Engin
eerin
g
Table 7: Take up slot widths - “K” dimensions
2.5 Tolerances for take up housings. (T)Table 8: Tolerances for “K” and “e” dimensionsFor take up housings (T)
Note: 1) K = width of guide rail grooves2) e = the span of guide rail grooves
Engineering Data
132
2.6 Tolerances for cartridge unit housings[LL11].Table 9: Tolerances for cartridge unit housings (C)
Unit 0.0001 in.
Note: 1) a = outside diameter of cartridge housings.2) l = width of cartridge housings.
2.7 Tolerances for standard castings.Table 10: Standard casted tolerances.
Table 11: Machined tolerances For all machined tolerances not otherwise specified in this catalog.
Engineering Data
133
Engin
eerin
g
3. Tolerances for pressed steel units.Table 12: Tolerances for pressed steel housings [LL12].
Note: 1) e = centerline dimension2) s = bolt hole dimension3) h = base to center height.
4. Suggested tolerances for shaftTable 13: Shaft tolerances for cylindrical bore insert bearings.
Engineering Data
134
4.1 Suggested shaft tolerances using set screw locking bearings.Table 14: Suggested shaft tolerances for set screw locking bearing units.
C/PC = bearing radial load ratingP = equivalent radial load applied to bearing
Note: For low speed and/or low load applications, loose fits are adequate.However, for higher speed and/or load applications, tighter fits are suggested.
4.2 Suggested shaft tolerances using eccentric locking collar bearings.Table 15: Suggested shaft tolerances for eccentric locking collar bearing units.
C/PC = bearing radial load ratingP = equivalent radial load applied to bearing
As in the case of the set screw system, it is usual under normal operating conditions, to fit the inner ring to the shaft by means of a clearance fit for ease of assembly.
Table 15.1: Eccentric locking collar shaft tolerance quick reference chart.
250000
170000
150000
100000
7000
40000
On the calculation of the dnvalue, apply the bore dimensionof the metric series in the samegroup.
dn Va
lued (
mm) X
rev/
min
d=bo
re in
mm.
n=be
aring
RPM
m6
k6
j7
h7
h8
h9
250000
170000
150000
100000
7000
40000
On the calculation of the dnvalue, apply the bore dimensionof the metric series in the samegroup.
dn Va
lued (
mm) X
rev/
min
d=bo
re in
mm.
n=be
aring
RPM
m6
k6
j7
h7h8
h9
Engineering Data
135
D. MountingLocking to the shaft.
Cylindrical bore bearings- Set screw locking.For normal operating conditions, ball bearings are fixed to the shaft with socket head set screws as illustrated in figures 4 and 5. It is recommended that the shaft haveflats or recesses in the areas where the set screws will contact it. This eliminates the formation of burrs on the shafting
Where vibration, shock and or thrust loads are anticipated, it is recommended that the shaft have a machined shoulder or auxiliary locking collar against which thebearing inner ring can be mounted. See figure 6. Set screws on cylindrical bore bearings should be tightened incrementally and firmly to prevent rotation of the shaft inthe bearing bore. Tighten one set screw to sufficiently contact the shaft, then tighten the second set screw to the full torque requirement, and then tighten the first setscrew to the full torque requirement. It is also recommended the set screws be re-tightened after 24 hours of operation. Tightening torque values are shown in table16. Caution should be taken to not over tighten the set screws as this can cause inner ring distortion instigating an eccentric rotation and out of balance situation.
It is important to mention that PEER high frequency anneals the inner ring in the areas around the set screws. In addition to preventing cracking of the inner ring during set screw tightening, this allows the use of larger diameter set screws increasing the holding power. Set screw sizes and hex sizes are shown in table 16. PEER also uses a special set screw spacing to increase holding power of the set screws during operation.
Table 16: Tightening torque of set screws in set screw locking bearings.
Note: based on class 3A, alloy steel, knurled cup point set screws, cold forged with black oxide finish. Hardness value of 45-53 used in annealed inner rings with class 3B set screw holes. Other set screw styles and types are available upon request.
Table 16:a Stainless Steel Set Screw Tightening Torque Requirements
Engin
eerin
g
Cylindrical bore bearings-Eccentric locking collars.Eccentric locking collar bearings are locked to the shaft by aligning the eccentric area of the collar against the corresponding eccentric area of the inner ring androtating the collar in the direction of shaft rotation. Using a punch in the blind hole on the collar, tap the punch in the direction of shaft rotation. The eccentric locking collar will continually tighten during shaft rotation. Tightening the set screw in the locking collar to the shaft using the torque values shown in table 17 will provide limited holding power and is not to be relied upon solely for securing the shaft.
Eccentric Locking collar bearings are to be used in single direction rotating applications only. If a reversing rotation is desired or expected, set screw locking or “Grip-It” style bearings are required. If thrust or axial loads are expected on locking collar bearings, the use of a machined shoulder or auxiliary locking device is required.
Table 17: Tightening torque of set screw in eccentric locking collar.
Note: Metric bore bearings use metric size set screws in the locking collars. See table 16 for tightening torque of metric size set screws.
Engineering Data
136
ECCENTRIC LOCKING COLLAR ASSEMBLY PROCEDURES
Slide Shaft into bearing bore. Locate bearing/shaft on mounting surface. Secure housing to mounting Shaft must be straight, true and Mounting surface should be flat and stable. surface.free of nicks and burrs. If needed, align bearing to insure it isproperly aligned in the housing.
If possible, rotate shaft by hand Engage locking collar by rotating Insert a drift punch in blindin direction of final rotation Collar IN DIRECTION OF SHAFT hole of locking collar. Punchto insure the bearing turns freely ROTATION so the eccentricity of must be positioned so strikingand smoothly. the collar mates with the eccentricity it rotates the collar IN THE Slide locking collar over shaft. of the inner ring. DIRECTION OF SHAFT
ROTATION
Using a lightweight hammer, strike DO NOT STRIKE PUNCH IN Tighten the set screw to prescribed torque. Drift punch smartly to engage the SUCH A MANNER AS TO Collar IN THE DIRECTION OF EXERT FORCE STRAIGHTSHAFT ROTATION. DOWN ONTO THE BEARING(Illustration shown for counter- INNER RING.Clockwise shaft rotation)
Engineering Data
137
Engin
eerin
g
Engineering Data
138
Cylindrical bore bearings-Concentric “Grip-It” bearings.“GR” series or Grip-It bearings are locked to the shaft by tightening the concentric collar over the inner ring extension via the cap screw. As the cap screw istightened, the collar compresses the inner ring extensions capturing the shaft in a concentric manner. Recommended cap screw torque values can be found intable 18.
This mounting style maintains superb shaft to bore concentricity eliminating vibration and fretting corrosion normally associated with insert bearings. In addi-tion, since there is no screw intrusion into the shaft, there is no need to refinish or dress the shaft after removal or replacement of the Bearing.
Table 18: Grip-It series cap screw torque recommendations
5 Greasing:5.1 greasing intervals.PEER mounted unit insert bearings are pre-lubricated at the factory and are ready for operation. Under normal operating conditions it is normal for a smallamount of grease to purge from the seals during initial start up. This condition will stop once optimum grease fill has been obtained. Re-lubrication of PEERinsert bearings is determined by operating conditions and environment. Greases used in re-lubricating PEER bearings should be NLGI # 2 compatible with alithium thickener, mineral base oil and a temperature range of -10 to +260 degrees F. General greasing intervals based on RPM and operating conditions areshown in table 19. However, experience is the preferred method of determining greasing intervals and fill amounts.
Table 19: Greasing intervals.
d = inner diameter of bearing (mm)n = speed in RPM
Engineering Data
139
Engin
eerin
g
5.2 Grease fill amountsCare should be taken when re-greasing bearings to avoid overfilling. Overfilling can lead to excessive heat and or unseating of the seals. Grease should be introduced in small increments and under light pressure. The use of pneumatic greasing equipment is not recommended unless low pressure is assured. Whenever possible, the shaft should be rotated during relubrication to insure proper grease distribution throughout the raceways.
The grease fill shown in table 20 provides a general rule for re-greasing amounts. However, it is preferred that experience dictates fill amounts due to wide variances in applications and operating environments.
Table 20: Grease fill amounts.
5.3 Grease fittings.
PEER offers many styles and types of grease fittings. Figure 7 illustrates some of the many styles and sizes PEER units can be equipped with. Optional fitting materi-als, thread designs and additional styles are available by special order. Table 21 shows the standard fitting sizes used on PEER units.
Table 21: Grease fitting equipped in PEER ball bearing mounted units.
Note: Optional 90˚ and 45˚ fittings available.
Location of zerk hole on pillow block units.
PEER has the ability to locate the zerk hole in a wide variety of locations on the pillow block housings. Table 22 shows our standard location. See figure 8 and figure 9. Special locations are available by request.
Table 22: Location of zerk fitting on pillow block units.
Engineering Data
140
5.4 Grease types.
PEER bearings are pre-lubricated with standard grease suitable for a wide variety of applications, speeds, temperatures and environments. Special greases are readily available. Shown in table 23 is a small sampling of standard and special greases offered.
Table 23: Greases and operating temperatures.
Note: Operating temperature, environment, RPM and load all play a role in selecting the appropriate grease for each application. Experience and field data are the bestmethod of selecting the correct grease.
6. Internal radial clearance.Internal clearance between the balls and ball raceways in insert ball bearings permits interference fits on the bearing rings without preloading the bearings. In addition, the internal clearance is designed to allow for slight thermal expansion of the shafting in the inner ring and slight misalignment of the inner and outer rings. Proper internal clearance is particularly important for bearings operating at high speeds or under high temperatures and or loads. Radial clearance can be defined as the average diameter of the outer ring raceway, minus the average diameter of the inner ring raceway, minus twice theball diameter. The result is the amount of radial internal clearance. Generally, radial clearance is measured on assembled bearings by displacing the outerring radially with respect to the inner ring under a reversing light gauge load. Table 24 shows the most common internal clearance classifications.
Table 24: Internal radial clearance for cylindrical bore insert bearings
Note: Peer standard is C3 clearance for all ball bearing units except SER series, which utilizes C4 internal clearance.
Engineering Data
141
6.1 Load ratingsThe load ratings shown in table 25a apply to all PEER deep groove, mounted unit, ball bearings manufactured using 52100 bearing grade steel. See table 25b forload ratings of PEER stainless steel bearings. Load ratings for cylindrical bore UC, HC, FHS, FHSR, FH, FHR, GR and SER series bearings are identical. The load ratings in table 25a have been calculated per ABMAstandard 9-1990 and conform to ISO standard 281.
Table 25a; Load rating data 52100 steel bearings.Unit: Lbf
NOTE: These dynamic load ratings (Cr) are based on an interference shaft fit. ABMA standard 9-1990 recommends that for slip or loose shaft fits, divide the basic dynamic load rating(Cr) by 1.3 to obtain the de-rated value. For PEER GR series bearings, where shaft to bore concentricity is maintained, the de-rating factor can be reduced to 1.1 or eliminated depending on application parameters.
Table 25b: Load Rating data Stainless Steel BearingsUnit: Lbf
Engin
eerin
g
Engineering Data
142
E. Load Capacity and LifeMany factors influence the selection of a bearing for a particular application. The most common of these is the selection of a bearing based on its load carry-ing capacity and life calculations. A numerical value termed BASIC LOAD RATING has been assigned each insert bearing to be used in the life calculations.Values for the basic dynamic (Cr) and static (Cor) load capacity can be found in table 25 and on the individual insert bearing dimension pages of this catalog.
1) Basic Load RatingThe basic dynamic load rating (Cr) is used in calculations involving dynamically stressed bearings, when selecting a bearing which is to rotate under a radialload. This load rating expresses the dynamic load a specific bearing will operate under for a life of 1,000,000 revolutions (33 1/3 RPM for 500 hours).
2) LifeThe life of an individual bearing is defined as the number of revolutions which the bearing is capable of enduring before fatigue occurs on the rings or balls.
Dynamic load ratings are based on the life that 90% of a group of identical bearings can be expected to reach or exceed. The majority of PEER bearingsattain much longer life than this. The median life is approximately five times the calculated life rating.
2.1) Life calculationThe relationship between the basic rating life, the basic dynamic load rating and the applied load is expressed by the equation:
L10 = (Cr/P)p
WhereL10 = basic rating life in millions of revolutions.Cr = basic dynamic load rating, Lbf.P = equivalent dynamic applied load, Lbf.p = exponent for the life equation. For ball bearings the p value is 3. For bearings operating under a steady applied load and at a constant speed, a basic life expressed in operating hours uses the equation:
L10h = (Cr/P)3
x 16667/n
WhereL10h = basic life in operating hoursn = operating speed, RPM.
The basic rating life expressed as either L10 or L10h should be used when selecting a bearing size.
Example 1: Determining L10h life.An UC205-16 bearing is operating at 700 RPM with an applied radial load of 350 Lbf. The calculation for minimum (L10h) is;
From table 25 we know an UC205-16 bearing has a basic dynamic load rating (Cr) of 3150 Lbf. Therefore (Cr/P)3
= (3150/350)3
or 729. Given the RPM of 700 we know 16667/700 = 23.81. Therefore, 729 x 23.81 = 17,357.5 hours.
Example 2: Selecting a bearing.A bearing is required to operate under a radial load (P) of 674 Lbf. At a constant speed of 2000 RPM and achieve a L10h life of 15,000 hours. To select thebearing we use the equation;
Cr = P x ((L10 x RPM) / 16,667)1/3
or 674 x ((15,000 x 2000) / 16667)1/3
or Cr = 8199 Lbf.
Using this information and table 24 we find we need to use a bearing of size 211 at minimum to achieve this.
Example 3: Finding maximum load (P).An UC204-12 bearing is to achieve a L10h of 10,000 hours while operating at 1500 RPM. To calculate the maximum steady radial load we can apply use theformula;
P = Cr / ((L10 x RPM) / 16667)1/3
or P = 2900 / ((10,000 x 1500) / 16667)1/3
or P = 300 Lbf.
Engineering Data
143
Engin
eerin
g
Load Rating tables:52100 Steel BearingsTable 26a shows PEER standard duty 52100 steel ball bearings radial load capacity based on L10 life, operating speed and ring (bearing) size. The values in thistable represent those loads a particular bearing can operate at, under ideal circumstances, and achieve a predetermined life (L10) at a selected RPM. ABMA stan-dard 9-1990 recommends the use of a mounting factor multiplier de-rating these loads when a slip fit or loose fit shaft is used. To obtain the de-rated load multiplythe load by 1.3.
Values shaded and in bold are that series basic dynamic load (Cr) value.
Engineering Data
144
2.2 Static load ratingIn cases where the bearings are to rotate at relatively low speeds, have slow oscillating movements, or are exposed to shock loads, a basic static (Cor) loadrating must be taken into consideration.
2.21 Thrust Load ratingPEER inserts are manufactured to the same standards as deep groove Conrad bearings and therefore designed mainly for radial loads. While they will accepta certain amount of thrust or axial loading their core intent is for radial loading. In cases where there is a thrust or axial load applied to PEER insert bearings,it is desired that the thrust load be less than 1/3 of the bearings basic dynamic load rating (Cr) value. In no case should the thrust load exceed the bearingsstatic load capacity (Cor) value.
2.22 Combined loads.Deep groove ball bearings are designed to accept a radial load. However, they are capable of handling a small degree of axial or thrust load in addition tothe radial load.
In applications where both a radial and axial load is acting on a bearing, a combined load value needs to be used in the life calculations. This equivalentdynamic radial load is defined as the hypothetical load, constant in magnitude and direction, acting radially on insert radial bearings, which would have thesame influence on bearing life as the actual loads to which the bearing is to be subjected. Assuming constant load, Po = C1(xFr + yFa) where C1 = impactfactor, fr = the radial load and fa = the axial load, x and y vary depending on the Fa/Cor and Fa/Fr ratios. Table 27 shows C1 or impact factors and Table27a shows the x and y factors.
Table 27: Impact Factors
Table 27a: Radial and axial factors x and y for determining equivalent bearing load for ball bearings.
Note: It is not recommended that Fa exceed 1/3 of the basic dynamic load rating (Cr) from table 25. If Fa is greater than or equal to 1/3 of the basic load rating (Cr) fromtable 25, consult Peer engineering department. In no instances should Fa exceed the bearings static load capacity Cor.
Engineering Data
145
Engin
eerin
g
2.3 Variable load and speed. In applications with a constant speed, where the load grows linearly from a minimum value (Pmin) to a maximum (Pmax), then drops back to the minimum value,the average load is;
Pm = (Pmin + 2Pmax) / 3Where Pm = equivalent dynamic bearing load in Lbs.
P1 = constant load at n1 RPM for T1 minutes.P2 = constant load at n2 RPM for T2 minutes.Pn = constant load at nn RPM for Tn minutes.
n = RPMT = TimeWhen a bearing is subjected to consecutive runs at different constant speeds and different periods of load application, the ideal constant load Pm can be calculatedby: Pm = (((P1
3x n1 x T1) + (P2
3x n2 x T2) + ....+ (Pn
3x nn x Tn)) / ((n1 x T1) + (n2 x T2) +...+ (nn x Tn)))
1/3
2.4 Life Adjustment Factors, a1, a2, a3 for insert ball bearings.
a1, Life adjustment factor for reliability.L10 is the life based upon a 90% or greater survival rate of a group of bearings. When the application requires a higher reliability the a1 adjustment factor can beobtained from table 28.
Table 28
a2, Life adjustment factors for bearing materials.Adjustments for special bearing steel properties such as low impurity levels, heat treating, etc. is covered under adjustment a2. However, per ABMA standard 9-1990 7.4.2, this is not sufficient justification for an a2 value greater than 1. Therefore, the a2 factor for Peer insert bearings will remain consistent at 1 as shownin table 29.
Table 29
a3, life adjustment for operating conditions.The a3 adjustment factor is the result of any number of operating factors the end user wishes to consider in the life analysis. These include but are not limited to,cleanliness of environment, temperature, viscosity of lubrication, shaft size and alignment. These factors combined reflect the a3 adjustment factor. However, in cal-culating the a3 for insert ball bearings with slip fit shafts and set screw or eccentric locking collars, it is accepted that a3 will equal 0.456 per ABMA Standard 9-1990 7.5.4. This is the result of the mounting and assembly methods insert bearings with slip fit shafts employ. Since there is normally a slip fit between the bearingbore and shaft diameter for set screw and eccentric locking collar insert bearings, the a3 will be consistent at 0.456. For Peers’ “GR” series Grip-It bearings, whichmaintain a concentric shaft to bore alignment, the a3 factor may be increased to 0.800. If the basic dynamic load rating (Cr) used in the L10 or L10h calculationhas already been de-rated, there is no need for further de-ration under the a3 adjustment factor.
The above 3 adjustment factors can be added to the L10 life calculation by the formula; Lna = (a1 x a2 x a3) L10
Engineering Data
146
2.5 Calculating Applied Loads (P):The applied load acting on a bearing is a primary factor in selecting the appropriate bearing and calculating L10 life for a given application. For proper insert bearing selection and L10 life calculations, it is necessary to know the applied load(s) in a given application. These loads may be any one or a combination ofthe following factors;
1. Weights of components being supported by the bearings.2. Tightness or tension from chain or belt pressure.3. Vibration, varying loads or eccentricity of rotation.
To correctly calculate the applied load(s) it is necessary to know the;1. Amount of the load.2. Load direction.3. Distances between support bearings and loads.
Once these factors are known, one of the following calculations can be employed;
Vibratory Loads;For applications where there is an applied eccentric motion or vibration is designed into the design, it is necessary to calculate the effective force acting on the bearings resulting from this motion. This is calculated through the basic physics law of centrifugal force or “Force = Mass x Acceleration” using the equation F = .000341 x W x (R/12) x (N)^2 where;F = load W = weight of rotating component in lbs.R = radius of rotation in inches N = RPM of shaft.Example: the centrifugal load acting on a bearing operating under a vibratory rotation consisting of 1500 lbs weight with rotation radius of .125"(1/8") at500 RPM is; F = .000341 x 1500 x .125/12 x (500)^2 = 1332lbs
or
or
Engineering Data
147
Engin
eerin
g
Limiting Speeds:Table 30 lists the limiting speeds or maximum allowable RPM a bearing can operate at. The values listed in table 30 represent set screw or eccentric lockingcollar bearings with slip fit shafts and a 40% - 50% lubricant fill. For “GR” or Grip-It style 360o locking bearing or bearings with press fit shafts, these valuescan be increased 30% or multiplied by a value of 1.3.
Speed limits are greatly influenced by the bearings seal design and therefore, the more seal contact the lower the allowable maximum speed rating. All limiting speeds are based on horizontally mounted shafts and radial loads.
148
PEER AMI BROWNING DODGE FAFNIRUCP205-16 UCP205-16 VPS 216 P2B-SC-100 YAS 1UCLP205-16 UCLP205-16 VPLS 216 P2B-SCB-100 YAK 1UCPX05-16 UCPX05-16 VPS 316 P2B-SCM-100 —-HCP205-16 UGP205-16 VPE 216 P2B-SXR-100 RAS 1HCLP205-16 UGLP205-16 VPLE 216 P2B-SXRB-100 RAK 1GRP205-16 —- VPB-216 P2B-DL-100 —-GRLP205-16 —- VPLB-216 P2B-DLB-100 —-
FHSP205-16G BP205-16 VPS 116 P2B-VSC-100 SAS 1FHP205-16G KHP205-16 VPE 116 P2B-SXV-100 VAS 1
FHSLP205-16G BLP205-16 VPLS 116 P2B-VSCB-100 SAK 1FHLP205-16G KHLP205-16 VPLE 116 P2B-SXVB-100 VAK 1
FHSPWC205-16G BLLP5-16 VPS 116 —- —-FHPWC205-16G KHLLP205-16 —- —- —-FHSPW205-16G BPW205-16 VPS 116M —- —-FHPW205-16G KHPW205-16 VPE 116M —- —-UCPA205-16 —- —- —- —-UCPAS205-16 UCTB205-16 VTBS 217 TB-SC-100 YTB 2FHSPRZ205-16 BPR5-16 SSRPS 116 — —-FHPRZ205-16 KHPR205-16 SSRPE 116 —- RPB 1FHSPPZ205-16 BPP5-16 SSPS 116 P2B-SL-100 —-FHPPZ205-16 KHPP205-16 SSPE 116 P2B-SLX-100 PB 1
FHSPBPFLZ205-16 — —- —- —FHPBPFLZ205-16 —- —- —- PBS 1
UCF205-16 UCF205-16 VF4S 216 F4B-SC-100 YCJ 1UCFX05-16 UCFX05-16 VF4S 316 F4B-SCM-100 —-HCFS205-16 UGSLF205-16 VF4E 216 F4B-SXR-100 RCJ 1GRF205-16 —- VF4B-216 F4B-DL-100 —-
FHSF205-16G BF205-16 VF4S 116 F4B-VSC-100 SCJ 1FHF205-16G KHF205-16 VF4E 116 F4B-SXV-100 VCJ 1
FHSFJ205-16G —- —- —- —-FHF4X208-24 —- —- —- —-HCF4X208-24 —- —- —- —-UCFC205-16 UCFC205-16 —- —- —-UCFB205-16 UCFB205-16 — FB-SC-100 —-GRFB205-16 —- —- —- —-
FHSF3X205-16G BTM205-16 VF3S 116 LF-SC-100 GSFD 1FHF3X205-16G KHTM205-16 VF3E 116 LF-SXV-100 GVFD 1FHSF3C205-16 —- —- —- —-FHF3C205-16 —- —- —- —-FHSPFZ205-16 BPF5-16 SSF3S 116 F3B-SL-100 —-FHSPFFZ208-24 —- SSF4S 124 F4B-SL-124 —-FHPFZ205-16 KHPF205-16 SSF3E 116 F3B-SLX-100 —-FHPFFZ208-24 —- SSF4E 124 F4B-SLX-124 —-FHSPFTZ205-16 BPFF5-16 SSF3TS —- —-FHPFTZ205-16 KHPFT205-16 SSF3TE 116 —- RATR 1UCFT205-16 UCFT205-16 VF2S 216 F2B-SC-100 YCJT 1UCFTX05-16 UCFLX05-16 VF2S 316 F2B-SCM-100 YCJTM 1HCFTS205-16 UGFJT205-16 VF2E 216 F2B-SXR-100 RCJT 1GRFT205-16 —- VF2B-216 F2B-DL-100 —-
FHSFT205-16G BFT205-16 VF2S 116 F2B-VSC-100 SCJT 1FHFT205-16G KHFT205-16 VF2E 116 F2B-SXV-100 VCJT 1FHFTJ205-16G —- VF2E 116 —- VCJT 1FHSLF205-16G BLFL5-16 —- —- —-FHLF205-16G KHLFL205-16 —- —- —-
FHSFD205-16G —- —- —- —-FHFD205-16G —- —- —- —-
FHSFLCTQ205-16G BLCTE205-16 —- —- —-FHFLCTQ205-16G KHLCTE205-16 —- —- FLCT 1FHSFX205-16G BFX205-16 VF2S 116M LFT-SC-100 GSFTD 1FHFX205-16G KHFX205-16 VF2E 116M —- GVFTD 1
FHSPFLZ205-16 BPFL5-16 SSF2S-116 F2B-SL-100 —-FHPFLZ205-16 KHPFL205-16 SSF2E-116 F2B-SLX-100 RAT 1
FHSR205-16-4X730 —- —- —- —FHR205-16-4X730 — —- —- —FHSR205-16-2FM —- —- —- —-
FHSR205-16-2NCFM —- —- —- —-RCSMRFZ-16S —- —- —- —- RCSMRFZ-16L —- —- —- —-
PEER Mounted Unit Interchange All Shown in 1" Sizes
Pillo
w B
lock
s4-
Bolt
Flang
es3-
Bolt
Flang
es2-
Bolt
Flang
es
149
HUB CITY IPTCI LINK BELT NTN SKF SEAL MASTER—- UCP205-16 P3-U216N UCP205-100T SY 1 TM NP-16—- UCPL205-16 PL3-U216N UCPL205-100T —- NPL-16—- UCPX05-16 —- UCPX05-100T SYM 1 TM MP-16—- NAP205-16 P3-Y216N UELP205-100T —- RP-16E— NAPL205-16 PL3-Y216N UELPL205-100T SYH 1 WM RPL-16E—- — —- —- —- NP-16T—- —- —- —- —- NPL-16T
PB251-1 SBP205-16G —- —- —- VP-16PB221-1 SAP205-16G P3-W216U —- SY 1 FM VP-16EPB250-1 SBPL205-16G —- —- —- VPL-16PB220-1 SAPL205-16G PL3-W216U —- SYH 1 FM VPL-16E
PB100/150-1 SBLP205-16G —- —- —- —-—- SALP205-16 —- —- —- —-—- — —- —- —- LP-16—- —- —- —- —- LP-16E—- —- —- —- —- —-—- UCPA205-16 PT3-U216N UCUP205-100T —- TB-17—- —- —- ASRPP205-100 —- LRP-16—- —- —- —- SR 1 FM —-
PB100-1 —- —- ASPP205-100 —- SSP-16—- —- —- AELPP205-100 S 1 FM SSP-16E—- —- —- —- —- —-—- —- —- —- —- —-—- UCF205-16 F3-U216N UCF205-100T FY 1 TM SF-16—- UCFX05-16 —- UCFX205-100T FYM 1 TM MSF-16—- NANF205-16 F3Y216N UELFU205-100T FY 1 WM RF-16E—- —- —- —- —- SF-16T
FB250-1 SBF205-16 — —- —- VF-16FB220-1 SAF205-16G F3-W216U —- FY 1 FM VF-16E
—- —- —- —- FYW 1 FM —-—- —- —- —- —- —-—- —- —- —- —- —-—- UCFC205-16 —- UCFC205-100 —- —-—- UCFB205-16 FB3-U216N UCFH205-100T —- FB-16—- —- —- —- —- FB-16T
FB150-1 SBRFB205-16G —- —- —- LF-16—- SARFB205-16G F-WG216U —- —- LF-16E—- —- —- —- —- —-—- —- —- —- —- —-
FB-100-1 —- —- ASPF205-100 —- SSF-16—- —- —- —- —- SSFF-24—- —- —- AELPF205-100 F 1 FM SSF-16E—- —- —- —- —- SSFF-24E—- —- —- —- —- TSSF-16—- —- —- —- —- TSSF16-E—- UCFL205-16 FX3-U216N UCFL205-100T FYT 1 TM SFT-16—- —- —- UCFLX05-100T —- MSFT-16—- NANFL205-16 FX3Y216N UELFLU205-100T FYT 1 WM RFT-16E—- —- —- —- —- SFT-16T, TFT-16T
FB260-1 SBFL205-16G —- —- —- VFT-16FB230-1 SAFL205-16G FX3-W216U —- FYT 1 FM VFT-16E
—- —- —- —- —- VFT-16E—- SBLF205-16G —- —- —- —-—- SALF205-16G —- —- —- —-—- —- —- ASFD205-100 —- —-—- —- —- JELFD205-100 —- —-—- —- —- —- —- —-—- —- —- —- —- —-
FB110/160-1 SBLF205-16GH4 —- —- —- LFT-16—- SALF205-16GH4 FX-WG216U —- —- LFT-16E
FB100-1 —- —- ASPFL205-100 —- SSFT-16—- —- —- JELPFL205-100 FT 1 FM SSFT-16E— —- —- —- —- —-— —- —- —- —- —-— —- —- —- —- —-—- —- —- —- —- —-— —- —- —- —- SRF-16— —- —- —- —- —-
Engin
eerin
g
150
PEER AMI BROWNING DODGE FAFNIRFHSBR205-16 —- —- —- —-FHBR205-16 —- —- —- RABR 1
LCR-16 —- —- —- —-LRCR-16 —- —- —- LRCR 1RCR-16 —- —- —- RCR 1
RCSM-16S —- RUBRS 116 —- —-RCSM-16L —- RUBRE 116 —- RCSM 1LRCSM-16L —- —- —- LRCSM 1
RCSM-16-UCR —- — —- —-RCSM-16-GRR —- —- —- —-
UCT205-16 UCST205-16 VTWS 216 WSTU-SC-100 YTU 1GRT205-16 —- —- WSTU-DLM-100 —-
UCHA205-16 UCECH205-16 — SCHB-SC-100 RHC 1GRHA205-16 —- —- —- —-UCC205-16 UCLC205-16 — CYL-SC-100 RC 1GRC205-16 —- —- —- —-UC205-16 UC205-16 VS 216 INS-SC-100 GY1100KRRB
UC205-16-TRL —- —- —- GY1100KPPB3UCX05-16 UCX05-16 VS 316 INS-SCM-100 GYM100KRRBHC205-16 UG205-16 VE 216 INS-SXR-100 G1100KRRB
HC205-16-TRL —- —- —- G1100KPPB3HCR205-16 —- —- —- G1100KRRGR205-16 —- VB-216 INS-DL-100 —-
GR205-16-ZSFF —- —- —- —-SER-16 SER205-16 VER 216 —- ER-16
SER-16-ZSFF —- —- —- —-SER-16-ZMKFF —- —- —- —-
GER-16 —- —- —- —-GER-16-ZSFF —- —- —- —-
GER-16-ZMKFF —- —- —- —-FHS205-16 B5-16 LS 116 —- YA100RRB
FHS205-16G B5-16 VS 116 INS-VSC-100 GYA100RRBFHSR205-16 BR5-16 SLS 116 INS-CC-100 YA100RRFH205-16 KH205-16 LE 116 INS-SLX-100 RA100RRB
FH205-16G KH205-16 VE 116 INS-SXV-100 GRA100RRBFHR205-16 KHR205-16 SLE 116 —- RA100RR
FHRL6005-16 —- —- —- —-FHL6005-16 —- —- —- RAL100NPPBSSUCP205-16 MUCP205-16 —- —- —-
SSUCPAS205-16 —- —- —- —-SSUCF205-16 —- —- —- —-
SSUCFB205-16 —- —- —- —-SSUCFT205-16 MUCFL205-16 —- —- —-SSUCHA205-16 —- —- —- —-SSUCT205-16 —- —- — —-
SUCP205-16-PBT MUCPPL205-16 —- P2B-SCEZ-100-PCR YAS 1 PTSUCPAS205-16-PBT MUCTBL205-16 —- TB-SCEZ-100-CR STB 1SUCF205-16-PBT MUCFPL205-16 —- F4B-SCEZ-100-PCR YCJ 1 PT
SUCFB205-16-PBT MUCFBL205-16 —- FB-SCEZ-100-CR —-SUCFT205-16-PBT MUNCFL205-16 —- F2B-SCEZ-100-PCR YCJT 1 PTSUCT205-16-PBT MUCTPL205-16 —- NSTU-SCEZ-100-CR —-
SUCHA205-16-PBT MUCHPL205-16 —- —- —- ZUCP205-16-PBT UCPPL205-16-MZ —- P2B-SCTC-100-CR YAS 1 NT
ZUCPAS205-16-PBT UCTBL205-16-MZ —- TB-100-SC —-ZUCF205-16-PBT UCFPL205-16-MZ —- F4A-SCTC-100-CR YCJ 1 NT
ZUCFB205-16-PBT UCFBL205-16-MZ —- FB-SCEZ-100-NY —-ZUCFT205-16-PBT UNCFL205-16-MZ — F2B-SCTC-100-CR YCJT 1 NTZUCT205-16-PBT UCTPL205-16-MZ —- NSTU-100-SCNP —-
ZUCHA205-16-PBT UCHPL205-16-MZ —- —- —-UC205-16-BLK —- —- —- —-
SUC205-16 MUC205-16MZ —- —- —-ZUC205-16 UC205-16MZ —- —- —-SSER205-16 MSER205-16 —- —- —- ZSER205-16 —- —- —- —-
Rubb
er C
artri
dge
Units
Take
-Up Un
its
Hang
erUn
itsCy
lindr
ical
Cartr
idge
Inse
rt Be
aring
sCo
rrosio
n Re
sista
ntAl
l Sta
inles
s St
eel
Stai
nless
Inse
rtTh
erm
opla
stic
Hous
ing
Zinc
Inse
rtTh
erm
opla
stic
Hous
ing
Corro
sion
Resis
tant
Inse
rts
PEER Mounted Unit Interchange All Shown in 1" Sizes
151
HUB CITY IPTCI LINK BELT NTN SKF SEAL MASTER—- —- —- —- —- —-— —- —- —- G 1 FM —-— —- —- —- —- —-— —- —- —- —- —-— —- —- —- —- —-—- —- —- —- —- SRC-16—- —- —- —- R 1 FM —-— —- —- —- —- —-— —- —- —- —- —-— —- —- —- —- —-
WSTU250-1 UCT205-16 TH3-U200N UCT205-100T TBY 1 TM SF-16—- —- —- —- —- ST-16T—- UCHA205-16 —- UCHB205-100T —- SEHB-16— —- —- —- —- —-—- —- —- UELC205-100T —- SC-16— —- —- —- —- —-
YW250-1 UC/UCW205-16 UG216NL UC205-100D1 YAR205-100 2-1—- UC205-16L3 UG216E3 —- —- —-
B350-1 UCX05-16 —- UCX05-100D1 YAR206-100 3-1YW220-1 NA/NAW205-16 YG216NL UEL205-100D1 YEL205-100 R-16E
—- NA205-16L3 YG216E3 YEL 205-100C —- —-—- —- —- YET 205-100W YEL205-100C —-—- —- —- —- —- 2-1T—- —- —- —- —- 2-1TLO, 2-1TXLO—- ER205-16 —- VCS205-100DINR —- ER-16— —- —- —- —- —-— —- —- —- —- —-—- —- —- —- —- ER-16T—- —- —- —- —- ERX-16TLO, ERX-16TXLO— —- —- —- —- —-
B250-1 SB205-16N S216EL AS205-100 —- L-16B250-1 BB205-16G SG216EL AS205-100D1 YAT205-100 V-16
—- CSB205-16N —- ASS205-100N —- SL-16B220-1 SA205-16N W216UL AEL205-100 YET205-100W L-16EB220-1 SA205-16G WG216UL AEL205-100N YET205-100 V-16E
—- CSA205-16N WB216-UL AELS205-100N YET205-100CW SL-16E— —- —- —- —- —-— —- —- —- —- —-—- SUCSP205-16 —- —- —- —-—- SUCSPA205-16 —- —- —- —-—- SUCSF205-16 —- —- —- —-—- SUCSFB205-16 —- —- —- —-—- SUCSFL205-16 —- —- —- —-—- SUCSHA205-16 —- —- —- —-—- SUCST205-16 —- —- —- —-—- SUCTP205-16 —- —- SY 1 TR BP-16—- SUCTPA205-16 —- —- —- TBC-16—- SUCTF205-16 —- —- FY 1 TR BF-16—- SUCTFB205-16 —- —- —- BFB-16—- SUCTFL205-16 —- — FYTB 1 TR BFT-16—- —- —- —- —- —-—- —- —- —- —- —-—- CUCTP205-16 —- —- —- NP-16-CR—- CUCTPA205-16 —- —- —- —-—- CUCTF205-16 —- —- —- SF-16-CR—- CUCTFB205-16 —- —- —- FB-16-CR—- CUCTFL205-16 —- —- —- SFT-16-CR—- —- —- —- —- —-—- —- —- —- —- —-—- BUC205-16 —- —- —- —-—- SUC205-16 —- —- —- —-—- CUC205-16 —- —- —- —-—- SSER205-16 —- —- —- —-—- —- — —- —- —-
Interchange Note: This Interchange is for comparison only. It is based on competitor catalog information available at the time of publication. Inspection and measurement of actual samples ormanufacturer’s drawings is required to determine if critical dimensions or features meet the user’s requirements.
Engin
eerin
g
USA
PEER Bearing Headquarters2200 Norman Drive Waukegan, IL 60085USAPh: 1 847 578 [email protected]
ChinaPEER China – SPZRm 2306 Fortune Times Building #1438 North Shaanxi Road Putuo District, Shanghai, ChinaPh: +86 21 [email protected]
ItalyPEER Bearing S.R.L. Via Paolo Nanni Costa, 12/3 A40133 [email protected]
GermanyPEER Bearing GmbHMainzer Landstraße 4760329 Frankfurt am MainGermanyPh: +49 (0) 69 95 92 54 [email protected]
BrazilAlameda Mamoré, 535-cj. 408/410Alphaville–Barueri–SP BrazilCEP 06454-040Ph: +55 11 4166 [email protected]
United KingdomUnit 6, Chelworth ParkChelworth RoadCricklade, WilshireSN6 6HE, EnglandPh: +44 (0) 1793 [email protected]
Valued bearing solutions for agricultural, electrical, fluid, HVAC, lawn & garden, material handling and transmission industries
Global application engineering support
TS-16949 certified manufacturing facilities
Dedicated research and development center
Testing capabilities include: fatigue life, noise/vibration, mud slurry and salt spray testing
Flexible manufacturing to allow for low to high volume production
Customer service excellence
NS-289-5
NS
-289-5