Cover2016-v10-person - · PDF fileBioreactor / Fermentor • 10.4” large color...

2016Catalogue

v1.0

Bioreactor / Fermentor

• Duo heating system, thermostat and dry heating combined in one• Most versatile and compact system on the market (W250 x L510 xH500 mm)• Interchangeable five (5) types of autoclavable glass vessel• Control up to sixteen (16) systems from a single interface• Compatible with microbial and cell culture applications• Intuitive user interface for short learning time with multi-language support• Ethernet communication with Winpact SCADA software, and IP addressing• Expansion module available for system upgrade for optional devices

Benchtop System Overview

The most versatile, price and space saving fermentation system is now available from our Winpact fermentation product line-the Winpact One Fermentation System.Winpact One is not only compact in size but also provides all the necessary tools as a standard instrument. The duo heating system allows you to choose any vessel type up to 10 L for any application needs. The optional expansion module allows you to add additional devices to enhance the capability of the system. All necessities such as temperature, anti-foam, pH and DO probe are all included in the standard package.

The Winpact Parallel Fermentation System is the ultimate and true parallel system for your parallel experiment. Whether you need to run two identical experiment or different experiment at the same time, the duo heating system allows you to run two thermostat heating, two dry heating or one thermostat and one dry heating simultaneously. The state of the art design is constructed with the upmost versatility for you to operate any vessel type and size in any combination you like. The remote software can control up to 16 vessels for true parallel operation.

NEW

1 2

2

3 6

6

FS-06

FS-05

• Duo heating system, thermostat and dry heating combined in one • True Parallel System, one (1) controller controls two (2) vessels• Interchangeable five (5) types of autoclavable glass vessel• Control up to eight (8) systems from a single interface • Compatible with microbial and cell culture applications• Intuitive user interface for short learning time • Ethernet communication with Winpact SCADA software, and IP addressing• Compatible with vessel volume from 0.5 L to 20 L• Full selection of optional devices available

Winpact Parallel System (FS-05 Series)

Winpact One System (FS-06 Series)

www.majorsci.com10

Bioreactor / Fermentor

• 10.4” large color touch-screen & graphical user Interface, easy to operate• Linux based system for stable operation and impervious to virus intrusion• Automatic vessel angle control mechanism from vertical to horizontal perfectly suitable for simultaneous saccharification and fermentation research• Typical applications covers enzymatic hydrolysis research with lignocellulosic materials and Ganoderma solid status research• Temperature control environment and optional humidity control and detection• Various optional impeller choices and aeration introduction into the materials available

Winpact Evo is our next generation model for the existing FS-01 and FS-02 system; it retains all the great features from FS-01 and FS-02, so you have nothing to lose. We also greatly enhanced the functionalities and capabilities of this newly developed controller, including the versatility and system expansion capabilities.

NEW

NEW

1 2 3 4

1

2

3

6

4

5

6

5

Single wall dish bottom vessel, 1 L

Double jacketed dish bottom vessel, 3 L

Single wall air lifter vessel, 5 L

Double jacketed air lifter vessel, 5 L

Single wall dish bottom vessel with heating blanket, 5 L

Single wall plain bottom vessel with heating base unit, 10 L

FS-07

FS-07-SA05P

Winpact Solid State Fermentation System

Winpact Evo System (FS-07 Series)

*For more information, please contact your local distributors.

Winpact Solid State system is designed for the laboratory scale research to gain the excellent results, the optimization, and for the scale up through built-in controller factors. Alike Winpact series, it offers a 10.4" color touch screen with graphic user interface and 4 built-in peristaltic pumps on the Linux based operation system. An automatic vessel angle control mechanism via the Winpact controller really gives the outstanding mixing efficiency and simulation for solid state materials research such as enzymatic hydrolysis research with lignocellulosic materials and Ganoderma solid status research.This system is designed for both aerobic and anaerobic fermentation with different optional impellers.

• Duo heating system, thermostat and dry heating combined in one• Universal system for R&D in cell culture and microbiology• Interchangeable five (5) types of autoclavable glass vessel• Control up to sixteen (16) systems from a single interface • Compatible with microbial and cell culture applications• Intuitive user-interface for short learning time with multi-language support• Small pilot scale 15 L and 20 L glass vessel compatible• Ethernet communication with Winpact SCADA software, and IP addressing• Winpact EZScript software for advance fermentation process (optional)

11

Winpact Controller and Vessel Selection Guide

Controller Duo heating control ( FS-05, FS-06, FS-07 )

VesselDouble Jacketed(FS-V-A series)

Single Wall(FS-V-B series)

Air Lifter(FS-V-C series)

Single Wall withHeating Blanket(FS-V-B series)

Single Wall withHeating Base Unit(FS-V-D series)

Agitation motor Brushless motor Brushless motor N / A Brushless motor Brushless motor

Impeller* Rushton-type Rushton-type N / A Rushton-type Rushton-type

Temp range5 °C above coolant

to 60°C5 °C above coolant

to 60°C5 °C above coolant

to 60°C5°C above coolant

to 60°C5°C above coolant

to 90°C

Vessel size 500 ml - 10 L 1 - 10 L5 L only, single or double

jacketed1 - 20 L 3 - 10 L

Speed range30 - 1,200 rpm (500 ml - 5 L)

30 - 1,000 rpm (10 L)30 - 1,200 rpm (1 - 5 L)30 - 1,000 rpm (10 L)

N / A30 - 1,200 rpm (1 - 5 L)30 - 1,000 rpm (10 L)

30 - 700 rpm (15, 20 L)

30 - 1,200 rpm (3 - 5 L)30 - 1,000 rpm (10 L)

Heating Built-in heat exchanger Heating blanket Heating base unit

Cooling External chiller, automatic cooling water valve

Aeration Orifice ring sparger, baffle Orifice ring sparger, baffle PTFE micro sparger Orifice ring sparger, baffle Orifice ring sparger, baffle

Grounding port No need No need Yes No need No need

Application

Excellent for temperaturesensitive and shear-forcesensitive cells such as

mammalian andinsect cell cutlure

Great for aerobic oranaerobic microbial culture;suitable for plant cell and photosynthesis cell culture

Excellent for shear-sensitivecells; ideal for plant cells,fungal cells, algae cell and

photosynthesiscell culture

Ideal for rapid temperaturechange aerobic and anaerobic microbial(bacteria and yeast)

fermentation

Excellent for aerobic andanaerobic microbial

(bacteria, yeast)culture, such as E.coli

*Pitched blade impeller is optional.

Vessel Specification

Model FS-05 FS-06 FS-06 + FS-06EPM* FS-07

Product name Winpact Parallel Winpact One Winpact One Winpact Evo

Heating system Duo heating

Working volume range 500 ml - 20 L 500 ml - 10 L 500 ml - 10 L 500 ml - 20 L

Autoclavable glass vessels Yes

Interchangeable vessels All types

Number of vessels controlled per controller

2 1 1 1

Number of vessels controlled via remote software

Max 16

Touchscreen controller 10.4" 8" 8" 10.4"

Number of peristaltic pumps 8 3 3 4

Gas mixing options Available No Available, * Available

Oxygen enrichment Available No Available, * Available

Mass flow controller Available No No Available

Off gas analyzer Available No No Available

ORP probe Available No Available, * Available

Lighting module Available No Available, * Available

External pump Multiple 1 max. 2 max. Multiple

* Optional expansion module (FS-06-EPM) needed.

Winpact Controller Selection Guide

www.majorsci.com12

Vessel type Double Jacketed Dish Bottom Vessel (FS-V-A series)

Materials Borosilicate glass / 316L stainless steel for headplate and all fittings

Working volume ** 500 ml 1 L 3 L 5 L 10 L

Total volume Δ 1 L 1.5 L 3.8 L 6.8 L 12.5 L

Vessel type Single Wall Dish Bottom Vessel (FS-V-B series)


Working volume ** 1 L 3 L 5 L 10 L

Total volume Δ 1.5 L 3.8 L 6.8 L 12.5 L

Vessel type Air Lifter Vessel (FS-V-C series)*


Working volume ** 5 L single wall 5 L double jacketed

Total volume Δ 7 L

Vessel type Single Wall Dish Bottom Vessel with Heating Blanket (FS-V-B series)


Working volume ** 1 L 3 L 5 L 10 L 15 L 20 L

Total volume Δ 1.5 L 3.8 L 6.8 L 12.5 L 18.7 L 23.7 L

Vessel type Single Wall Plain Bottom Vessel with Heating Base Unit (FS-V-D series)


Working volume ** 3 L 5 L 10 L

Total volume Δ 3.7 L 6.7 L 13.1 L

*FS-A-CON04 is pre-configured in Air Lifter Vessels as standard. Available upon purchase of all type vessels over 3L. ** Suggested Max.

Δ Total volumes are approximate and may vary slightly.


Vessel Application

Vessel

Application

FS-V-A series FS-V-Bseries FS-V-C series FS-V-B series FS-V-D series

Double JacketedDish Bottom Vessel

Single WallDish Bottom Vessel

Air Lifter VesselSingle Wall Dish

Bottom Vessel with Heating Blanket

Single Wall Plain Bottom Vessel with Heating Base Unit

Mammalian cell cultureAerobic microorganism culture (Note 1)Micro-aerobic microorganism culture (Note 2)Anaerobic microorganism culture (Note 3)Fragile cell culture (Note 4)Photosynthesis cell culture (Note 5)Plant cell cultureInsect cell culture

Not recommendedGoodExcellent

Note:1. Some bacteria; yeast; fungi2. Facultative culture (For example, some Lactobacillus; ethanol production)3. Same as Note 24. This vessel is excellent for fragile cells that are easily sheared by any type of mechanical impeller5. Plant; algae; cyanobacteria (blue-green algae)

13

Ⓑ

Ⓐ

Ⓗ

Control / Manual Control / Sequence Pumps

Performs manual, sequence or EZScript control (optional) of each parameter Control the peristaltic pump speed, direction, total volume and flow rate

Controller Layout

Winpact Control System

FS-05

FS-06

FS-07

Ⓒ

Ⓒ

Ⓒ

Ⓕ

Ⓕ

Ⓕ

ⒹⒹ

Ⓓ

ⒺⒺ

Ⓖ

Ⓖ

Ⓔ

Ⓔ

ⒶColor touch screen

ⒷAssignable & adjustable peristaltic pumps

Ⓒ USB port for easy data transfer

Ⓓ Power switch

Ⓔ Adjustable air flow meter

Ⓕ ABS flame retardant front panel

Ⓖ Adjustable O2 flow meter (optional)

Ⓗ Sensor control panel

Ⓘ Air & cooling control panel

Ⓐ

Ⓐ

Ⓑ

Ⓘ

Ⓑ

www.majorsci.com14

Easy operate on-screen sensor calibration with help menu

ChartingCalibration

Real-time data recording and exporting during a fermentation process with image capture capability (NEW)

System Setup

Intuitive system set up for optional devices and administration

Service

Professional parameters for fast maintenance and troubleshooting

*PC and switch hub are not included

Switch Hub

Intranetconnection

Directconnection

PC remote controlling software connects up to 16 systems

Overall Features:█Duo heating system, thermostat and dry heating combined in one█Interchangeable five (5) types of autoclavable glass vessel█Compatible with a total of 20 vessels, working volume range of 500ml-20L on a single controller.█Compatible with microbial and cell culture applications█Highly acid and base resistant Watson Marlow pump heads█Flexibility in data exporting, USB or PC connection█Easy maintenance and upgrade modular system█No software purchase necessary█Ethernet cable connection for remote control█Quality assurance- CE certified and ISO accredited

Software Features:█Linux based system for stable and virus proof operation█15-step sequential control for pH, temperature., agitation and feeding program█Intuitive user-interface for short learning time with multi-language support█Over 59,994 user programs and 100 process data files can be stored in controller█pH and DO stat with smart feeding technology█Eight (8) user accounts with secure password for maximum protection█Real-time on-screen data viewing, recording and exporting ensures quick data analysis█Ethernet communication with Winpact SCADA software, and IP addressing█Winpact EZScript software for advanced fermentation process (optional)

15

Winpact Parallel System

Controller Specification & Vessel Comparison

FS-05

10L Single Wall Vessel

with Heating Base Unit

1L Double

Jacketed Vessel

Newly developed Winpact

interface for easy operation

Remote control software

connects up to 16 systems

(total 32 vessels) at the

same time via PC

System Specification

Vessel Single Wall with Heating Blanket (FS-V-B series) Single Wall with Heating Base Unit (FS-V-D series)Working volume 1 L 3 L 5 L 10 L 15 L 20 L 3 L 5 L 10 LTotal volume 1.5 L 3.8 L 6.8 L 12.5 L 18.7 L 23.7 L 3.7 L 6.7 L 13.1 L

Vessel Double Jacketed (FS-V-A series) Single Wall (FS-V-B series) Air Lifter (FS-V-C series)Working volume 500 ml 1 L 3 L 5 L 10 L 1 L 3 L 5 L 10 L 5 LTotal volume 1 L 1.5 L 3.8 L 6.8 L 12.5 L 1.5 L 3.8 L 6.8 L 12.5 L 7 L

*All vessels are made of borosilicate glass and 316L stainless steel for headplate and all fittings


ControllerDuo heating system controller

Built-in rotameter8 built-in pump heads, 4 pump heads on each side

Vessel

Double Jacketed Dish Bottom Vessel (includes glass body, head plate, T-handling bar, 2 probe

adaptors)

Single Wall Dish Bottom Vessel (includes glass

body, head plate, T-handling bar, 2 probe

adaptors)

Air Lifter Vessel (includes glass body, head plate,

draft tube, T-handling bar, 2 probe adaptors)

Single Wall Dish Bottom Vessel with Heating

Blanket (includes glass body, head plate,

T-handling bar, 2 probe adaptors and heating

blanket)

Single Wall Plain Bottom Vessel with Heating Base Unit(includes glass body, head plate, T-handling

bar, 2 probe adaptors and heating base unit)

Rushton-type impellers No impellers Rushton-type impellersBaffle assembled Draft tube assembled Baffle assembled

Condenser assembledAir sparger assembled Micro sparger assembled Air sparger assembled

Motor Agitation motor N / A Agitation motor

Probes

1x pH probe and 1x probe cable1x Do probe and 1x probe cable

1x Temperature probe and 1x probe cable1x Anti-foam/level sensor and 1x probe cable

Start-up kit Complete start-up kit includes silicone tubes, tube clamps, metal connector and autoclavable disc filters. Please see p.35 for details.

Utility RequirementPower source 210-230V, 50-60Hz with electrical safety cutoff switchWater source 10 psig (0.69 bar), 14.5 psig (1 bar) maximum; (water supplied to fermenter must be softed and at least 15°C below set operating temperature)Air source 10 psig (0.69 bar), 29.0 psig (2 bar) maximum; air must be dry, oil-free and filteredSterilization Autoclave; size of the autoclave's inner chamber must be able to accomodate vessel with condenser attached

*Ordering information, please refer to p42-46.

www.majorsci.com16

Control unit

Control panel 10.4" Color touch-screen interface

Communication port Remote software control through Ethernet, up to 16 systems per PC Data export through USB port Analog AUX port for system extension

Program storage Up to 59,994 process programs Log data storage Up to 100 process monitoring data files Cabinet material ABS front panel and painted iron housing

Dimension Footprint: W x L = 15.75" x 21.26" (400 mm x 540 mm); Height: 29.14" (740 mm) Rated voltage 220V~; 50/60 Hz, 10A, 2000W

Aeration Inlet gas flow-meter

0,0.1-1 LPM (500 ml), 0, 0.2-2.5 LPM (1 L), 0, 1-10 LPM (3, 5 L), 0, 2-25 LPM (10 L), 0, 4-50 LPM (15, 20 L)

Sparger Orifice ring Baffle Removable 316L stainless steel baffles

Temperature

Heating 1. Thermostat system: built-in heat exchanger (550W heater, water circulation pump) 2. Dry heating system : external devices (heating blanket or heating base unit)

Cooling Cooling coil valve and an external chiller Range 5°C (41°F) above coolant up to 60°C (140°F) Probe Platinum RTD probe (PT-100), non autoclavable

Control mode Manual or programmable 15-step PID control

Agitation

Drive Removable top brushless motor

Speed range a. For extremely shear-sensitive cell line: 30-300 rpm b. For fermentation and cell culture: 30-1200 rpm (0.5-5 L) and 30-1000 rpm (10 L); 30-700 rpm (15, 20 L)

Resolution 1 rpm increment

Impeller 2 impellers for 0.5-1 L vessel and 0.5-5 L Double Jacketed Vessel 3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel Note: customized impellers are available upon ordering

Control mode Manual or programmable 15-step PID control with adjustable deadband

pH

Range 2 - 12 pH Resolution 0.01 pH

Probe Gel-filled electrode, autoclavable Control mode Manual/acid start/progrmmable 15-step PID control

DO

Range 0 - 200% Resolution 0.1%

Probe Polarographic DO sensor; autoclavable

Control mode

2-stage DO cascade response (manual or program mode) a. Increase or decrease agitation speed b. Supply external oxygen source (oxygen enrichment module required, optional device) c. Adjust DO level using gas mixing control (gas mixing station module required, optional device) Substrate feeding strategy

ORP(optional) Measurement range ± 2000 mV

Resolution 1 mV Probe Gel-filled electrode: autoclavable

Foam / level Probe

316L stainless steel protector with insulated PTFE tube; autoclavable, adjustable sensitivity control

Control mode Foam: on/off switch Level: on/off switch control with wet/dry probe set up

Peristaltic pump

Pump number 4 built-in Watson Marlow pumps per vessel (total 8); multiple external pump extendable (MU-D series required, optional)

Motor type Precise stepping motor; minimum speed is 1 rpm Speed range 0 - 65 rpm Resolution 1 rpm

Control mode Manual or programmable 15-step feeding control; pump can be assigned for acid, base, antifoam and substrate

Exhaust Device type 316L stainless steel condenser

Specification

17

Winpact One Fermentation System

FS-06 Compatible with any vessel types up to 10 liter



(16 vessels) at the same

time via PC


Vessel Single Wall with Heating Blanket (FS-V-B series) Single Wall with Heating Base Unit (FS-V-D series)Working volume 1 L 3 L 5 L 10 L 3 L 5 L 10 LTotal volume 1.5 L 3.8 L 6.8 L 12.5 L 3.7 L 6.7 L 13.1 L





Built-in rotameter3 built-in pump heads

Vessel


adaptors)



adaptors)






blanket)

Single Wall Plain Bottom Vessel with Heating Base Unit (includes glass body,

head plate, T-handling bar, 2 probe adaptors and

heating base unit)




Probes


1x Temperature probe and 1x probe cable1x Anti-foam/level sensor and 1x probe cable

Start-up kit Complete start-up kit includes silicone tubes, tube clamps, metal connector and autoclavable disc filters,. Please see p.35 for details.


Utility RequirementPower source 100-120V / 210-230V, 50-60Hz with electrical safety cutoff switchWater source 10 psig (0.69 bar), 14.5 psig (1 bar) maximum; (water supplied to fermenter must be softed and at least 15°C below set operating temperature)Air source 10 psig (0.69 bar), 29.0 psig (2 bar) maximum; air must be dry, oil-free and filteredSterilization Autoclave; size of the autoclave's inner chamber must be able to accomodate vessel with condenser attached


www.majorsci.com18

Control unit

Control panel 8" Color touch-screen interface


Program storage Up to 59,994 process programs Log data storage Up to 100 process monitoring data files Cabinet material ABS front panel and painted iron housing

Dimension Footprint: W x L = 9.84" x 20.08" (250 mm x 510 mm), Height: 19.69" (500 mm) Rated voltage 110V~/220V; 50/60 Hz, 10A

Aeration Inlet gas flow-meter 0,0.1-1 LPM (0.5 L), 0, 0.2-2.5 LPM (1 L), 0, 1-10 LPM (3, 5 L), 0, 2-25 LPM (10 L)


Temperature

Heating 1. Thermostat system: built-in heat exchanger (550W heater, water circulation pump) 2. Dry heating system (heating blanket or heating base unit)

Cooling Cooling coil valve and an external chiller

Range with FS-V-A / B / C series : 5°C (41°F) above coolant up to 60°C (140°F); with FS-V-D series :5°C (41°F) above coolant up to 90°C (194°F)

Probe Platinum RTD probe (PT-100), non autoclavable Control mode Manual or programmable 15-step PID control

Agitation

Drive Removable top brushless motor

Speed range a. For extremely shear-sensitive cell line: 30-300 rpm b. For fermentation and cell culture: 30-1200 rpm (0.5-5 L) and 30-1000 rpm (10 L)

Resolution 1 rpm increment

Impeller 2 impellers for 0.5-1 L vessel and 0.5-5 L Double Jacketed Vessel 3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel Note: customized impellers are available upon ordering


pH


Probe Gel-filled electrode, autoclavable

Control mode Manual/acid start/programmable 15-step PID control with adjustable deadband **pH Stat with smart feeding technology

DO



Control mode

DO cascade response: 1-stage or 2-stage** a. Increase or decrease agitation speed **b. Supply external oxygen source (oxygen enrichment module required, optional device) **c. Adjusting DO level using gas mixing control (gas mixing station module required, optional device) **DO Stat with smart feeding technology



Foam / level Probe 316 L stainless steel protector with insulated PTFE tube, autoclavable, adjustable sensitivity control


Peristaltic pump

Pump number 3 built-in Watson Marlow pumps, **1-2 external pump extendable (MU-D series required, optional) Motor type Precise stepping motor; minimum speed is 1 rpm

Speed range 0 - 65 rpm Resolution 1rpm

Control mode Manual or programmable 15-step feeding control; pump can be assigned for acid, base, antifoam and substrate; **flow rate & total volume calculation

Exhaust Device type 316 L stainless steel condenser

Specification

** Expansion module (FS-06-EPM) required.

19


Vessel Single Wall with Heating Blanket (FS-V-B series) Single Wall with Heating Base Unit (FS-V-D series)Working volume 1 L 3 L 5 L 10 L 15 L 20 L 3 L 5 L 10 LTotal volume 1.5 L 3.8 L 6.8 L 12.5 L 18.7 L 23.7 L 3.7 L 6.7 L 13.1 L





Built-in rotameter4 built-in pump heads

Vessel


adaptors)



adaptors)






blanket)

Single Wall Plain Bottom Vessel with Heating Base Unit (includes glass body,

head plate, T-handling bar, 2 probe adaptors and

heating base unit)




Probes


1x Temperature probe and 1x probe cable1x anti-foam/level sensor and 1x probe cable

Start-up kit Complete start-up kit includes silicone tubes, tube clamps, metal connector and autoclavable disc filters. Please see p.35 for details.

Winpact Evo Fermentation System


FS-07

Utility RequirementPower source 100-120V / 210-230V, 50-60Hz with electrical safety cutoff switchWater source 10 psig (0.69 bar), 14.5 psig (1 bar) maximum; (water supplied to fermenter must be softed and at least 15°C below set operating temperature)Air source 10 psig (0.69 bar), 29.0 psig (2 bar) maximum; air must be dry, oil-free and filteredSterilization Autoclave; size of the autoclave's inner chamber must be able to accomodate vessel with condenser attached




(16 vessels) at the same

time via PC

www.majorsci.com20

Control unit

Control panel 10.4” color touch-screen Interface (Resolution: 800 x 600 pixels)


Program storage Up to 59,994 programs for different kinds of condition Log data storage Up to 100 process monitoring data files Cabinet material ABS front panel and painted iron housing

Dimension Footprint: W x L = 15.75" x 23.62" (400 mm x 600 mm); Height: 29.14" (740 mm) Rated voltage 110V~/220V~; 50/60 Hz, 10A

Aeration Inlet gas flow-meter

0, 0.4-5 LPM (0.5, 1 L); 0, 1-10 LPM (3, 5 L); 0, 2-20 LPM (10 L); 0, 4-50 LPM (15, 20 L)


Temperature

Heating 1. Thermostat system: built-in heat exchanger (550W heater, water circulation pump) 2. Dry heating system (heating blanket or heating base unit)

Cooling Cooling coil valve and an external chiller

Range with FS-V-A / B / C series : 5°C (41°F) above coolant up to 60°C (140°F); with FS-V-D series :5°C (41°F) above coolant up to 90°C (194°F);

Probe Platinum RTD probe (PT-100), non autoclavable Control mode Manual or programmable 15-step PID control

Agitation

Drive Removable top brushless motor (M3 for 0.5 L, 1 L; M2 for 3~20 L)

Speed range a. For extremely shear-sensitive cell line: 30-300 rpm b. For fermentation and cell culture: 30-1200 rpm (0.5-5 L); 30-1000 rpm (10 L); 30-700 rpm(15, 20 L)

Resolution 1rpm increment

Impeller 2 impellers for 0.5 L &1 L vessel and 0.5-5 L Double Jacketed Vessel 3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel Note: customized impellers are available upon ordering


pH


Probe Gel-filled electrode, autoclavable

Control mode Manual/programmable 15-step PID control with adjustable deadband pH Stat with smart feeding technology

DO



Control mode

2-stage DO cascade response a. Increase or decrease agitation speed b. Supply external oxygen source (oxygen enrichment module required, optional device) c. Adjust DO level using gas mixing control (gas mixing station module required, optional device) Substrate feeding strategy DO Stat with smart feeding technology



Foam / level Probe

316 L stainless steel protector with insulated PTFE tube, autoclavable, adjustable sensitivity control


Peristaltic pump

Pump number 4 built-in pumps, 1 to 2 external pumps (Optional) Motor type Precise stepping motor; minimum speed is 1 rpm

Speed range 0 - 65 rpm Resolution 1 rpm

Control mode Manual or programmable 15-step feeding control; pump can be assigned for acid, base, antifoam and/or substrate; pump can calculate flow rate and total volume

Exhaust Device type 316L stainless steel condenser

Specification

21

Specification

Control unit (FS-07, Winpact Evo Fermentation System)

Control panel 10.4” color touch-screen Interface (resolution: 800 x 600 pixels)Communication port Remote control through Ethernet, Analog AUX port for system extensionStorage program Up to 59,994 programs for different kinds of conditionData internal storage Up to 100 data filesData external storage interface USB portCabinet material Front panel: ABS / housing: painted ironDimension Footprint: W x L = 15.75" x 23.62" (400 x 600 mm); Heigh: 29.14" (740 mm)Rated voltage 110V~/ 220V~ ; 50/60 Hz

Aeration Inlet gas flow-meter 0, 0.2 - 2.5 LPM

Temperature

Heating Thermostat system: built-in heat exchanger (550W heater/water circulation pump)Cooling Thermostat system: built-in heat exchanger (cooling water provided by chiller)Range 5°C (41°F ) above coolant up to 60°C (140°F )Resolution 0.1°CControl mode Manual or programmable 15-step PID control

Agitation

Drive Removable top brushless motor (M3)Speed range 1-60 rpmTorque ≥1.8 N.mResolution 1rpmControl mode Manual or programmable 15-step PID control

Peristaltic pump

Pump number4 built-in pumps1 to 2 external pumps (optional) (control: on/off, speed)

Motor type Precise stepping motor; minimum speed is 1 rpmSpeed range 0 - 65 rpmResolution 1 rpm

Control modeManual or programmable 15-step feeding control;Pump can be assigned for acid, base, antifoam and/or substrateFlow rate and total volume of each pump can be calculated

FS-07-SA05P

Winpact Solid State Fermentation System

Special Features:

• 10.4” large color touch-screen & graphical user Interface, easy to operate• Linux based system for stable operation and impervious to virus intrusion• Automatic vessel angle control mechanism from vertical to horizontal perfectly suitable for simultaneous saccharification and fermentation research• Typical applications covers enzymatic hydrolysis research with lignocellu-losic materials and Ganoderma solid status research• Various optional impeller choices and aeration introduction into the materials available

0° to 90° rotation

Side view Front view

www.majorsci.com22

Complete Winpact Parallel Fermentation System (FS-05 Series) + Mettler Toledo ProbeCat No. Product DescriptionFS-05-AS5AS5P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 500 ml Double Jacketed Vessel

FS-05-AS5A01P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 1 L Double Jacketed Vessel




FS-05-AS5B01P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 1 L Single Wall Dish Bottom Vessel






FS-05-AS5C053P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 5 L Single Wall Air Lifter Vessel

FS-05-AS5C054P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 5 L Double Jacketed Air Lifter Vessel

FS-05-AS5D03P Complete Winpact Parallel Fermentation System for one 500 ml Double Jacketed Vessel and one 3 L Single Wall Plain Bottom Vessel



FS-05-A01A01P Complete Winpact Parallel Fermentation System for one 1 L Double Jacketed Vessel and one 1 L Double Jacketed Vessel




FS-05-A01B01P Complete Winpact Parallel Fermentation System for one 1 L Double Jacketed Vessel and one 1 L Single Wall Dish Bottom Vessel






FS-05-A01C053P Complete Winpact Parallel Fermentation System for one 1 L Double Jacketed Vessel and one 5 L Single Wall Air Lifter Vessel

FS-05-A01C054P Complete Winpact Parallel Fermentation System for one 1 L Double Jacketed Vessel and one 5 L Double Jacketed Air Lifter Vessel

FS-05-A01D03P Complete Winpact Parallel Fermentation System for one 1 L Double Jacketed Vessel and one 3 L Single Wall Plain Bottom Vessel

















Fermentation System Ordering Information

www.majorsci.com42

Complete Winpact Parallel Fermentation System (FS-05 Series) + Mettler Toledo Probe

Cat No. Product Description


























FS-05-B01B01P Complete Winpact Parallel Fermentation System for one 1 L Single Wall Dish Bottom Vessel and one 1 L Single Wall Dish Bottom Vessel






FS-05-B01C053P Complete Winpact Parallel Fermentation System for one 1 L Single Wall Dish Bottom Vessel and one 5 L Single Wall Air Lifter Vessel

FS-05-B01C054P Complete Winpact Parallel Fermentation System for one 1 L Single Wall Dish Bottom Vessel and one 5 L Double Jacketed Air Lifter Vessel

FS-05-B01D03P Complete Winpact Parallel Fermentation System for one 1 L Single Wall Dish Bottom Vessel and one 3 L Single Wall Plain Bottom Vessel













43

Complete Winpact Parallel Fermentation System (FS-05 Series) + Mettler Toledo ProbeCat No. Product DescriptionFS-05-B05B05P Complete Winpact Parallel Fermentation System for one 5 L Single Wall Dish Bottom Vessel and one 5 L Single Wall Dish Bottom Vessel






























FS-05-C053C053P Complete Winpact Parallel Fermentation System for one 5 L Single Wall Air Lifter Vessel and one 5 L Single Wall Air Lifter Vessel

FS-05-C053C054P Complete Winpact Parallel Fermentation System for one 5 L Single Wall Air Lifter Vessel and one 5 L Double Jacketed Air Lifter Vessel

FS-05-C053D03P Complete Winpact Parallel Fermentation System for one 5 L Single Wall Air Lifter Vessel and one 3 L Single Wall Plain Bottom Vessel



FS-05-C054C054P Complete Winpact Parallel Fermentation System for one 5 L Double Jacketed Air Lifter Vessel and one 5 L Double Jacketed Air Lifter Vessel

FS-05-C054D03P Complete Winpact Parallel Fermentation System for one 5 L Double Jacketed Air Lifter Vessel and one 3 L Single Wall Plain Bottom Vessel

FS-05-C054D05P Complete Winpact Parallel Fermentation System for one 5 L Double Jacketed Air Lifter Vessell and one 5 L Single Wall Plain Bottom Vessel

FS-05-C054D10P Complete Winpact Parallel Fermentation System for one 5 L Double Jacketed Air Lifter Vessel and one 10 L Single Wall Plain Bottom Vessel

FS-05-D03D03P Complete Winpact Parallel Fermentation System for one 3 L Single Wall Plain Bottom Vessel and one 3 L Single Wall Plain Bottom Vessel






www.majorsci.com44

Complete Winpact One Fermentation System (FS-06 Series) + Hamilton ProbeCat No. Product DescriptionFS-06-AS5P-110 Complete Winpact One Fermentation System for 500 ml Double Jacketed Vessel, 110VFS-06-AS5P-220 Complete Winpact One Fermentation System for 500 ml Double Jacketed Vessel, 220VFS-06-A01P-110 Complete Winpact One Fermentation System for 1 L Double Jacketed Vessel, 110V

FS-06-A01P-220 Complete Winpact One Fermentation System for 1 L Double Jacketed Vessel, 220V







FS-06-B01P-110 Complete Winpact One Fermentation System for 1 L Single Wall Dish Bottom Vessel, 110V








FS-06-C053P-110 Complete Winpact One Fermentation System for 5 L Single Wall Air Lifter Vessel, 110V

FS-06-C053P-220 Complete Winpact One Fermentation System for 5 L Single Wall Air Lifter Vessel, 220V

FS-06-C054P-110 Complete Winpact One Fermentation System for 5 L Double Jacketed Air Lifter Vessel, 110V

FS-06-C054P-220 Complete Winpact One Fermentation System for 5 L Double Jacketed Air Lifter Vessel, 220V

FS-06-D03P-110 Complete Winpact One Fermentation System for 3 L Single Wall Plain Bottom Vessel with Heating Base Unit, 110V






FS-06-EPM-110Winpact One expansion 110V module, expand system compatibility to Oxygen Enrichment Module, Gas Mixing Station, Photo-biosynthesis Module and ORP Probe.

FS-06-EPM-220Winpact One expansion 220V module, expand system compatibility to Oxygen Enrichment Module, Gas Mixing Station, Photo-biosynthesis Module and ORP Probe.

45

Complete Winpact Evo System (FS-07 Series) + Mettler Toledo ProbeCat No. Product DescriptionFS-07-AS5P-110 Complete Winpact Evo Fermentation System for 500mL Double Jacketed Vessel, 110V

FS-07-AS5P-220 Complete Winpact Evo Fermentation System for 500mL Double Jacketed Vessel, 220V

FS-07-A01P-110 Complete Winpact Evo Fermentation System for 1L Double Jacketed Vessel, 110V








FS-07-B01P-110 Complete Winpact Evo Fermentation System for 1L Single Wall Dish Bottom Vessel, 110V

FS-07-B01P-220 Complete Winpact Evo Fermentation System for 1L Single Wall Dish Bottom Vessel 220V


FS-07-B03P-220 Complete Winpact Evo Fermentation System for 3L Single Wall Dish Bottom Vessel 220V









FS-07-C053P-110 Complete Winpact Evo Fermentation System for 5L Single Wall Air Lifter Vessel, 110V

FS-07-C053P-220 Complete Winpact Evo Fermentation System for 5L Single Wall Air Lifter Vessel, 220V

FS-07-C054P-110 Complete Winpact Evo Fermentation System for 5L Double Jacketed Air Lifter Vessel, 110V

FS-07-C054P-220 Complete Winpact Evo Fermentation System for 5L Double Jacketed Air Lifter Vessel, 220V

FS-07-D03P-110 Complete Winpact Evo Fermentation System for 3L Single Wall Plain Bottom Vessel, 110V






Complete Winpact Solid State Fermentation SystemCat No. Product DescriptionFS-10-A05P-110 Complete Winpact Solid State Fermentation System for 5L Double Jacketed Vessel, 110VFS-10-A05P-220 Complete Winpact Solid State Fermentation System for 5L Double Jacketed Vessel, 220V

www.majorsci.com46

Copyright 2016 Major Science. All rights reserved. V1.0

US Office

19959 Sea Gull WaySaratoga, CA 95070 U.S.A.T/ +1-408-366-9866F/ +1-408-446-1107

Taiwan Office

No. 37, Wuquan 5th Road, Wugu Dist., New Taipei City 24888TaiwanT/ +886-2-2298-1055F/ +886-2-2299-7871

India Office

No.12-13-104, St. No.3, Lane No.1, Tarnaka, Secunderabad - 500017Telengana, IndiaT/ +91-40-27001515F/ +91-40-27001515

Date post:	17-Feb-2018
Category:	Documents
Upload:	dinhtram
View:	214 times
Download:	0 times

Cover2016-v10-person - · PDF fileBioreactor / Fermentor • 10.4” large color...

Documents