8-port 3-in-1, RS-422/485 PCI Express board with 4 kV surge protection and 2 kV electrical isolation

CP-118E-A-I/138E-A-I

The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their 8 serial ports supports data rates

of up to 921.6 kbps, and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.

Specifications

Overview

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-118E-A-I

CP-138E-A-I

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB78 femaleSerial InterfaceNumber of Ports: 8Serial Standards: CP-118E-A-I: RS-232/422/485 CP-138E-A-I: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbpsSerial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF

Serial SignalsRS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Physical CharacteristicsDimensions: 109.5 x 130 mm (4.31 x 5.11 in)Environmental LimitsOperating Temperature: 0 to 55°C (32 to 131°F)Storage Temperature: -20 to 85°C (-4 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Altitude: Up to 2000 mNote: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

8-port 3-in-1, RS-422/485 PCI Express board with 4 kV surge protection and 2 kV electrical isolation

CP-118E-A-I/138E-A-I

The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their 8 serial ports supports data rates

of up to 921.6 kbps, and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.

Specifications

Overview

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-118E-A-I

CP-138E-A-I

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB78 femaleSerial InterfaceNumber of Ports: 8Serial Standards: CP-118E-A-I: RS-232/422/485 CP-138E-A-I: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbpsSerial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF

Serial SignalsRS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Physical CharacteristicsDimensions: 109.5 x 130 mm (4.31 x 5.11 in)Environmental LimitsOperating Temperature: 0 to 55°C (32 to 131°F)Storage Temperature: -20 to 85°C (-4 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Altitude: Up to 2000 mNote: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

8-port 3-in-1, RS-422/485 PCI Express board with 4 kV surge protection and 2 kV electrical isolation

CP-118E-A-I/138E-A-I

The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their 8 serial ports supports data rates

of up to 921.6 kbps, and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.

Specifications

Overview

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-118E-A-I

CP-138E-A-I

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB78 femaleSerial InterfaceNumber of Ports: 8Serial Standards: CP-118E-A-I: RS-232/422/485 CP-138E-A-I: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbpsSerial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF

Serial SignalsRS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Physical CharacteristicsDimensions: 109.5 x 130 mm (4.31 x 5.11 in)Environmental LimitsOperating Temperature: 0 to 55°C (32 to 131°F)Storage Temperature: -20 to 85°C (-4 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Altitude: Up to 2000 mNote: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

1 f r . m o x a . c o m i n f o @ m o x a . c o m

M u l t i p o r t S e r i a l B o a r d s

CP-118E-A-I/138E-A-ICartes PCI Express RS-422/485 3 en 1 à 8 ports avec protection contre les surtensions 4 kV et isolation électrique 2 kV

› Compatible PCI Express x1

› Vitesse de communication série jusqu‘à 921,6 Kbps

› Mémoire FIFO de 128 octets et contrôle des fl ux logiciels

› Différents câbles et boitier de raccordement disponibles

pour RS-232/422/485

› Pilotes fournis pour les dernières versions de Windows,

Linux et Unix

› Maintenance facile avec affi chage à LED et logiciel

d‘administration

› Protection ESD de 15 kV, protection contre les surtensions

de 4 kV et isolation électrique de 2 kV

Les cartes série multivoies PCI Express intelligentes CP-118E-A-I et CP-138E-A-I sont conçues pour les applications de TPV et de DAB, ainsi que pour les systèmes d‘automatisation industrielle.

La CP-118E-A-I et la CP-138E-A-I sont compatibles avec tous les sys-tèmes d‘exploitation courants. Leurs 8 ports série prennent chacun en charge un débit de données pouvant atteindre 921,6 kbps et fournissent

des signaux de contrôle modem , ce qui garantit leur compatibilité avec un vaste choix de périphériques série.

En outre, la CP-118E-A-I et la CP-138E-A-I fonctionnent conformément à la norme PCI Express x1, ce qui permet d‘installer les cartes dans n‘im-porte quel emplacement répondant à ce format.

Introduction

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB78 female

Serial InterfaceNumber of Ports: 8Serial Standards:CP-118E-A-I: RS-232/422/485CP-138E-A-I: RS-422/485Max. No. of Boards per PC: 4

Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kV

PerformanceBaudrate: 50 bps to 921.6 kbpsSerial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF

Serial SignalsRS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GNDRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GND

Operating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10(x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Physical CharacteristicsDimensions: 109.5 x 130 mm (4.31 x 5.11 in)

Environmental LimitsOperating Temperature: 0 to 55°C (32 to 131°F)Storage Temperature: -20 to 85°C (-4 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Altitude: Up to 2000 mNote: Please contact Moxa if you require products guaranteed to functi-on properly at higher altitudes.

Spécifi cations

Technologie RS-485 intelligente pour une installation et un dépannage simples (brevet en cours)Il est relativement simple de mettre en place un réseau RS-485. La diffi culté survient au moment de la mise sous tension, quand les péri-phériques connectés au réseau commencent à transmettre et recevoir des données. Dans la plupart des cas, les ingénieurs sont obligés d‘affi -ner les réglages du système en confi gurant des résistances de rappel et des terminaisons aux points stratégiques du réseau. La nouvelle techno-

logie RS-485 intelligente de Moxa prend en charge deux fonctionnalités essentielles qui facilitent cette tâche : (1) une fonction d‘installation en un clic qui analyse automatiquement la topologie du réseau puis ajuste les terminaisons et les résistances de rappel, (2) une fonction de dépan-nage en un clic qui indique les modifi cations à faire pour remettre un réseau défaillant sur pied.

2

M u l t i p o r t S e r i a l B o a r d s

Standards and CertificationsEMC: CE, FCCEMI: EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart BClass BEMS: EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)Green Product: RoHS, CRoHS, WEEE

MTBF (mean time between failures)Time: CP-118E-A-I: 152,124 hrsCP-138E-A-I: 221,331 hrsDatabase: Telcordia (Bellcore), GB

Power RequirementsPower Consumption:CP-118E-A-I: 2,356 mA @ 3.3 VCP-138E-A-I: 2,356 mA @ 3.3 V

WarrantyWarranty Period: 5 yearsDetails: See www.moxa.com/warranty

Dimensions

Unit: mm (inch)

Références de commandeAvailable ModelsCP-118E-A-I: 8-port RS-232/422/485 PCI Express x1 serial board w/ surge protection and electrical isolationCP-138E-A-I: 8-port RS-422/485 PCI Express Smart x1 serial board w/ surge protection andelectrical isolation

1 13

14 25

1 5

69

CBL-M78M9x8-100 DB25 maleDB9 male CBL-M78M25x8-100

© Moxa Inc. All Rights Reserved. Updated Dec. 4, 2013. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.