CP7711 1/4”CP7721 3/8”
Promotion valid until September 30 2016, or while stocks last. All prices inclusive of GST. Whilst stocks last.
People. Passion. Performance.www.cp.com
http://www.ferret.com.au/c/Chicago-Pneumatic
Follow us on:
CP TORQUE WRENCHES
CP89051/4” TORQUE WRENCH 5-25NM
CP89103/8” TORQUE WRENCH 20-100NM
CP89151/2” TORQUE WRENCH 40-200NM
CP89203/4” TORQUE WRENCH 150-750NM
CP89251” TORQUE WRENCH 200-1000NM
Accuracy 4% according to EN ISO 2003 specifications. Includes calibration certificate. Long lasting accuracy up to 25000 cycles. Easy and precise torque adjustment with fine scale graduation. 54 teeth fixed pear head ratchet with quick socket release
CP89171/2” TORQUE WRENCH 100-340NM
NEWCP8917
■ 15% SMALLER than previous CP7722■ Ultra Compact: Better access to restricted areas, 140 mm length■ Lightweight: 0.53 Kg■ Max. torque: 80 ft.lbs. (110 Nm) in reverse■ High Durability: Single hammer mechanism, aluminium housing■ Easy operation: Power regulator with 3 positions on both sides
BUTTERFLY IMPACTS
■ 23% SMALLER than the previous CP7732
■ Compact: 112 mm length■ Lightweight: 1.0 Kg, composite housing■ Max. torque: 460 ft.lbs. (625 Nm) ■ Durable: Direct drive jumbo hammer
mechanism, steel motor and aluminium clutch housing
■ Easy operation: S2S one hand forward and reverse operation
CP7732C1/2” ULTRA COMPACT IMPACT WRENCH
CP7727 3/8”CP7737 1/2”
■ Unique Features, Premium tool: design and specifications
■ Comfort: Over molded composite and ergonomic handle to fit perfectly in hand
■ Compact: 240 mm length – 88 mm height■ Lightweight: 1.12 Kg■ Max. torque: 3/8” Drive 185 ft.lbs. (250 Nm) 1/2” Drive 220 ft.lbs. (300 Nm)■ Durable: Direct drive jumbo hammer mechanism,
steel motor and aluminium clutch housing ■ Easy Operation: Single handed forward and reverse,
3 positions in forward and 1 in reverse
ANGLE IMPACTS
BONUSCP WATCH
■ Ultimate torque: REV 922 ft.lbs (1250Nm)■ Twin hammer clutch■ Lightweight (only 2.0kg) ■ Thermo-plastic
rubber grip ■ 360° degree swivel fitting■ 3 Power settings
CP77481/2” DRV COMPOSITE BODY HEAVY DUTY IMPACT WRENCH
BONUSCP COOLER
BAG
BONUS
OR
■ Max. torque: 425 ft.lb (576 Nm)■ DYNA-PACT oil bath clutch
CP734H1/2” DRV IMPACT WRENCH ‘CLASSIC’
$32000CP734H KIT
BONUSSocket Set
SS413WP
■ Ultimate torque: REV 922 ft.lbs (1250Nm)■ Twin hammer clutch■ 2” Extended anvil■ Lightweight (only 2.25kg) ■ Thermo-plastic
rubber grip ■ 360° degree swivel fitting■ 3 Power settings
CP7748-21/2” DRV COMPOSITE BODY HEAVY DUTY IMPACT WRENCH
■ Ultimate torque 1300 ft.lbs (1760Nm)■ Compact and lightweight only 6.5 kg
■ Twin hammer clutch■ Steel motor
3/4” IMPACT WRENCHES in a COMPACT ‘D’ HANDLE Version
CP7763DSTANDARD ANVIL
CP7763D-66” EXTENDED ANVIL
■ Ultimate torque 1300 ft.lbs (1760Nm)■ Compact and lightweight only 6.5 kg■ Twin hammer clutch■ Steel motor
3/4” IMPACT WRENCHES
CP7763STANDARD ANVIL
CP7763-66” EXTENDED ANVIL
■ Ultimate torque: REV 2140 ft.Ibs (2901Nm)■ Rocking dog clutch■ Ergonomic side handle■ Protective cover on clutch housing■ Dual hole and friction retainer■ Full teasing trigger■ 3 position power regulator in both directions
CP7782 1” DRV ‘D’ HANDLE IMPACT WRENCHESCP7782STANDARD ANVIL
CP7782-66” EXTENDED ANVIL
CP77X1 CP77X7
CP734H
CP7763 CP7763D
$21300 $22000 $25000 $73000 $101500$28500
$33000 $48000
$35000 $35000 $36500
$89900 $94900
$71000
$74500
$91000 $96000
EACH$28900
EACH
www.cp.com Promotion valid until March 31 2016, or while stocks last. All prices inclusive of GST.
■ Composite overmold grip■ Powerful 0.47hp (350W)■ Low noise level 80dB(A) ■ 1 x 3mm collet■ 1 x 6mm collet■ 5 x 6mm
mounted points■ 5 x 3mm
mounted points
■ Low vibration■ 3/8” (10mm) Stroke length■ 5 x 18T, 24T and 32T blades■ 360º Swivel air inlet■ 10,000 Strokes
per minute■ Heavy duty
carry case
■ Compact, lightweight design for easy use■ 90° angle head allows flexibility in confined spaces■ Complete with 1/4” and 6mm collets■ Excellent for high speed
blending, smoothing, porting and deburring in confined areas
■ Heavy duty carry case
CP9111Q-B KIT1/4” (6MM) HEAVY DUTYDIE GRINDER KIT
CP875 KIT1/4” (6MM) HEAVY DUTYANGLE DIE GRINDER KIT
CP7901 KITHEAVY DUTY RECIPROCATING SAW KIT
Promotion valid until September 30 2016, or while stocks last. All prices inclusive of GST. Whilst stocks last.
■ Powerful and durable■ 1.12HP (850W) Motor■ 5/8”-11 Spindle thread■ Ergonomic left or right
hand handle
■ Powerful and durable■ 0.8Hp (600W) high performance■ M14 Spindle thread■ Lightweight
■ Powerful and durable■ 0.8Hp (600W) high performance■ 3/8”-24 Spindle thread■ Lightweight
CP9120CR4” HEAVY DUTY ANGLE GRINDER
CP9121AR5” HEAVY DUTY ANGLE GRINDER
CP91237” HEAVY DUTY ANGLE GRINDER
■ Progressive tease throttle■ Only 165mm long■ Torque range 5-15ft.lbs (7-21Nm)■ Comfortable forward & reverse
1/4”& 3/8” RATCHETS■ Features CP’s patented TriSpring anti slip head design■ Hardened gears■ Torque range 10-50 ft.lbs (14-68Nm)
3/8” & 1/2” RATCHETS
■ Rugged 0.5 hp (370W) Motor■ Adjustable speed regulator■ Lock off throttle■ Square handle design for greater comfort
1/4”DIE GRINDER
■ Grinding and cutting machine■ 5 x Cut-off wheels and 9 x grinding wheels included■ Side exhaust directs air away
from work area■ Compact and light
weight for easy access in tight areas
■ Max rpm: 20,000
CP7500D KIT2” HEAVY DUTY GRINDER AND CUTTER KIT
■ Highest durability in the market■ Convertible to a hammer or a light scaler■ Lightweight for easy operation only 0.1kg
CP9361 KITINDUSTRIAL AIR SCRIBE / PRECISION HAMMER
CP8251/4’’ DRV
CP825T3/8” DRV
CP8283/8” DRV
CP828H1/2” DRV
CP828H KIT1/2” DRV
CP860
CP860ES
CP860
CP825 CP828
$18800
$30000
$17700
$34000 $55000
$31500
$50000
$34000
$19900 $21500 $19000 $19900 $23000
$26500
$39900
People. Passion. Performance.
The extranet dedicated to CP Tools distributors
www.cp.com/cloud
CPCloud
■ Quick change belt replacement ■ Adjustable sanding arm■ Rubber molded grip
■ Speed: 12,000 rpm max■ Powerful 160w motor■ Colour coded
CP7225CVE (2.5mm orbit)CP7255CVE (5mm orbit)CP7215CVE (10mm orbit)
■ 1 x 50mm and 75mm backing pads
■ 10 x 50mm 320, 400 and 600 grit discs
■ Heavy duty carry case
■ 1 x 75mm backing pad■ Easy comfort trigger and
handle■ Includes soft, hard and
wool pads■ Heavy duty carry case
■ 1 x 3” backing pad■ 10 x 3” 80, 100 and 120 grit
sanding discs■ 1 x 3” fine, medium and course
prep discs■ Heavy
duty carry case
A range of riveters for general maintenance or light duty production: ■ Includes a variety of nose pieces ■ Transparent container for rivet
ends ■ Heavy pulling power: General Maintenance ■ CP9882 2200 lbs (1000 kg) Light Duty Production ■ CP9883 1900 lbs (865 kg) ■ CP9884 3530 lbs (1600 kg)
CP97XXHEAVY DUTY BELT SANDERS
CP72X5 SERIES6” RANDOM ORBITAL PALM SANDERS
CP720X SERIESMINI RANDOM ORBITAL KIT
CP988X SERIESRIVETERSSMART ROTARY
SANDING KITPOLISHING KIT
CP9882 3/16” (4.8MM) CP9883 3/16” (4.8MM) CP9884 1/4” (6.4MM)
■ Pistol handle with overall rubber cover■ Supplied with 2 sets of needles: 29 x 2mm + 19 x 3mm
CP7125NEEDLE SCALER
$41500■ Powerful 7.2 Joules■ 10.2mm (0.401”) Round shank■ Fast Cutting Action■ Comes with 5 Chisels and sturdy carry case
CP7111 KITHEAVY DUTY PISTOL GRIP HAMMER
$17500
■ High lighting power: 30 LED’s, 2250 Lux @ 50 cm / 55 Lumens
■ Rechargeable Li-ion battery ■ Fast charging time: 3.5 hours ■ LONG Working time: 6.0 hours ■ 120° adjustable magnetic base ■ 360° swivel hook ■ Waterproof: IP65 grade ■ 4 positions: Half light, Full light,
Flashing and Off
CP8006POWERFUL LED WORK LIGHT
$11200
CP9779 3/8” (10MM) CP9780 3/4” (20MM)
CP7300RQC1/4” (6 MM) REVERSIBLE COMPACT DRILL■ Industrial quality Jacob’s keyless
chuck ■ Ergonomic grip and lightweight ■ Planetary gearing with brass
bushings for low wear and long life ■ Adjustable exhaust
CP8793/8” (10MM) ANGLE DRILL■ Compact low profile head■ Reversible■ High performance gearing
CP97923/8” (10MM) HEAVY DUTY PISTOL DRILL■ Keyless chuck■ Reversible■ Industrial quality
Jacobs chuck
CP97911/2” (13MM) HEAVY DUTY PISTOL DRILL■ Keyless chuck■ Reversible■ Industrial quality Jacobs chuck
CP8873/8” (10 MM) IN-LINE DRILL ■ High performance
Jacob’s chuck ■ Built in regulator for
efficient control ■ Powerful and fast ■ Durability and
productivity ■ Perfect tool for
vertical drilling and to reach confined areas
CP18165/8” (16MM) INDUSTRIAL D-HANDLE DRILL■ Powerful with 1.0 hp (750 W) motor■ Excellent durable gearbox■ Designed for Industrial Maintenance
and Production■ Offers intensive duty and high
durability with precision■ Ideal for drilling of mild steel, cast iron
DRILLS
CP7200S CP7201P CP7202D
$32000
$22000
$34800
$54500
EA.$28000
$25000
$80500
$25000$25000
$20500
$28500
$21500$19900
$24000
$117500
Please find your local contact at: www.cp.comEnglish © Copyright 2016All prices include GST. All products were available in reasonable quantities at the time of printing this catalogue. CP Australia will do all things reasonably possible to maintain stocks advertised but cannot be responsible for the unavailability of such products as a consequence of the failure of supplier or service providers to deliver within the specified period and any other circumstances beyond the control of CP Australia. Images are for illustrative purposes only. Due to printing processes, colours in catalogue may vary from actual item. Freight charges may apply into regional areas.
Available from:
SS413WP3 PIECE SOCKET SET■ Sizes 17, 19 and 21mm
SS414WP4 PIECE SOCKET SET■ Sizes 17, 19, 21 and 22mm
Promotion valid until September 30 2016, or while stocks last. All prices inclusive of GST. Whilst stocks last.
Proper air preparation will improve the performance of your air tool (more power) and make your tool last longer (saving you money)
■ Aluminum body ■ Protected gauge ■ Liquid level indicators■ Polycarbonate bowl ■ High flow
89401719271/4” FRL■ 2080 (l/min) Max Air Flow■ 15 bar Proof pressure
89401719283/8” FRL■ 2100 (l/min) Max Air Flow■ 15 bar Proof pressure
89401719291/2” FRL■ 2600 (l/min) Max Air Flow■ 15 bar Proof pressure
SS4114D DEEPSS4114 STANDARD
SS4113U STANDARD SS4113DU DEEP
89401723018 PC WOOD DRILL BIT SET ■ Dia: 3mm – 4mm – 5mm –
6mm – 7mm – 8mm – 9mm – 10mm
89401723028 PC CONCRETE DRILL BIT SET ■ Dia: 3mm – 4mm – 5mm
– 6mm – 7mm – 8mm – 9mm – 10mm
894017230531 PC 25 MM IMPACTDRIVER BIT SET (ISO1173) ■ Slotted: 4mm – 5mm – 6mm – 7mm■ Phillips: PH0 – 2 x PH1 – 3 x PH2
– 2 x Ph3■ Pozidriv: 2 x PZ1 – 3 x PZ2 – 3 x PZ3■ Torx: T10 – T15 – T20 – T25 – T30■ Hexagonal: 2mm – 2.5mm – 3mm – 4mm –
5mm – 6mm
894017230319 PC METAL DRILL BIT SET■ Dia: 1mm – 1.5mm – 2mm – 2.5mm –
3mm – 3.5mm – 4mm – 4.5mm – 5mm – 5.5mm – 6mm – 6.5mm – 7mm – 7.5mm – 8mm – 8.5mm – 9mm – 9.5mm – 10mm
SS41XWP1/2” DRV THIN WALL WHEEL PROTECTOR SOCKET SETS ■ Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26
and 27mm
SS4114/D1/2” DRV 14 PIECE SOCKET SETS
■ Sizes: 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24mm
SS4113U/DU1/2” DRV 13 PIECE UNIVERSAL SOCKET SETS
■ Conforms to the shape of the vehicle■ Remains in place securely with protected magnets■ Outer skin strong and durable non-scratching vinyl
CP MAGNETIC FENDER COVERDRILL/DRIVER BIT SETS
FILTER, REGULATOR AND LUBRICATORS
Tool & Accessories Not Included
■ 4 x Top holders■ 2 x Bottom holders■ Plastic coated■ Super strong magnetic
attachment■ Includes screws for
fixed mounting
CP9841TOOL HOLDER - MAGNETIC
■ Composite hose reels in both CLOSED and OPEN
■ Highest quality components ■ Superior durability - tested
up to 25000 cycles ■ New crimping system ■ Fully repairable - Individual spare parts available - Includes DIY repair manual ■ Quality, safety and fully pressure tested ■ Rubber protection over the crimping ■ Premium POLYURETHANE HOSES
NEW HIGH QUALITY AND DURABLE CP HOSE REELS
HR8110BSP■ Hose Diameter: 10mm (3/8”)■ Hose Length: 16m (52.5ft)
HR9213BSP■ Hose Diameter 13mm (1/2”)■ Hose Length 15m (49ft)■ Rubber hose for rough
enviroments■ Most durable CP Hose Reel■ Capable of max pressure
870 PSI
$11800$7500$19300
$12900 $13500 $14500
$5700$4800 $19900
$3800
$4600
$11300
$3200
$4000
$5500
$79900
$37000