Date post: | 24-Apr-2015 |
Category: |
Documents |
Upload: | devanbongiri |
View: | 34 times |
Download: | 0 times |
TRAINING &CERTIFICRR ATIONAA
cathodic protection training & certification
CP 1—Cathodic Protection Tester
CP 2—Cathodic Protection Technician
CP 3—Cathodic Protection Technologist
CP 4—Cathodic Protection Specialist
Pipeline Corrosion Introductory Training—NACE OQ
2 NACE Cathodic Protection Training & Certifi cation
Photo courtesy of East Bay Municipal Utility District
NACE Cathodic Protection Training & Certifi cation 3
From an entry level employee
to a specialized engineer,
this program has the CP
training you need.
The NACE CP Training and Certifi cation Program is a
comprehensive training program designed for individuals
working with CP. It consists of classroom training,
practical hands-on training, and certifi cation. It provides a
solid education in the latest CP technology.
NACE Cathodic Protection (CP) Training & Certifi cation Program
CP Program Overview .........................................................................................................................................................................................4
CP 1—NACE Cathodic Protection Tester .............................................................................................................................................5
CP 2—NACE Cathodic Protection Technician ...................................................................................................................................6
CP 3—NACE Cathodic Protection Technologist ...............................................................................................................................8
CP 4—NACE Cathodic Protection Specialist .................................................................................................................................10
Pipeline Corrosion Introductory Training—NACE OQ ...............................................................................................................12
Future Program Development ....................................................................................................................................................................13
4 NACE Cathodic Protection Training & Certifi cation
The NACE CP program consists of 4 courses
Course Certifi cation
CP 1—Cathodic Protection Tester Cathodic Protection Tester
CP 2—Cathodic Protection Technician Cathodic Protection Technician
CP 3—Cathodic Protection Technologist Cathodic Protection Technologist
CP 4—Cathodic Protection Specialist Cathodic Protection Specialist
Individuals can enter the program at any point based on their level of education and
amount of CP experience. Individuals also have the option of achieving any one of
these certifi cations by examination. However, NACE strongly encourages individuals to
take the corresponding course, which helps them prepare for the examination.
For individuals that have little to no experience with CP, NACE offers 4 CP tutorials.
CP Tutorial 1—Basic Electricity
CP Tutorial 2—CP Fundamentals
CP Tutorial 3—CP Monitoring/Field Measurement
CP Tutorial 4—Stray Current Installation/Troubleshooting
If you are unsure if you are ready to take the CP 1—Cathodic Protection Tester
Course, NACE offers two short assessments online that can help you make this deci-
sion.
Ohm’s Law—www.nace.org/ohmslaw
Math Assessment—www.nace.org/mathassessment
CP Program Overview
“This is the most comprehensive CP training available to industry.”—Steve Nelson, Team Leader, Corrosion ServicesColumbia Gas Transmission/Columbia Gulf Transmission
NACE Cathodic Protection Training & Certifi cation 5
Description The CP 1—Cathodic Protection Tester Course is an intensive 6-day course that presents CP technology to pre-
pare students for the NACE Cathodic Protection Tester Certifi cation Examination. The course involves lectures
and intensive hands-on training with equipment and instruments used in CP testing. It also includes hands-on
training at outdoor facilities (weather permitting). The course concludes with both a 2-hour written and a 2-hour
practical (hands-on) examination.
Who Should Attend This program will benefi t anyone who is responsible for supervising CP systems, measuring the effectiveness
of CP systems and/or recording this data, including CP fi eld personnel, technicians, and those desiring certifi -
cation as a “NACE Cathodic Protection Tester.”
Prerequisites The following is strongly recommended, but not required:
• High school diploma or GED
• Six months CP work experience
• Ability to perform basic math calculations (simple algebra, fractions, and conversions)
What You Need to Know to Succeed in This Course Students who have little CP experience may be successful in this course if they are able to grasp scientifi c
concepts, perform math calculations and have an understanding of electrical measurements. Students should
strive to have 6 months of solid experience in handling CP instruments under the supervision of an experi-
enced CP tester or technician. They must also be comfortable with math concepts that include subtraction,
division, fractions, algebra, balancing equations, conversions of units, percentages, and graphs. An understanding
of Ohm’s Law applied to series and parallel circuits is also an asset. It is recommended that students without
this knowledge take advantage of the NACE CP Tutorials. If you do not know if you are ready to take the CP
1-Cathodic Protection Tester Course, you can walk through two short assessments on the NACE website.
• Ohm’s Law (www.nace.org/ohmslaw)
• Math Assessment (www.nace.org/mathassessment)
Course Highlights (include but are not limited to)
Basic Electricity Basic Chemistry and Corrosion Fundamentals
CP Fundamentals Field Measurements
Stray Current Identifi cation Installing CP Components
Monitoring CP Systems Recordkeeping
Safety Specifi c to CP Troubleshooting
Exam-Only Option is available. Contact NACE for more details.The Cathodic Protection Tester Certifi cation by Examination Only Option consists of a 2-hour written exami-
nation and a 2-hour hands-on practical examination. Students seeking certifi cation who are not taking the CP
1-Cathodic Protection Tester Course will take the same written and practical examinations which are offered in
this course. Exam-only candidates will be sent a CP 1–Cathodic Protection Tester Course Manual at the time of
registration. Examinations will be offered the last day of the regularly scheduled CP 1-Cathodic Protection Tester
Course offerings. Contact NACE fi rstService for more information. Registration fees for exam only candidates are
nonrefundable.
CP 1—NACE Cathodic Protection Tester
6 NACE Cathodic Protection Training & Certifi cation
Description The CP 2—Cathodic Protection Technician Course is an intensive 6-day course that presents
CP technology to prepare students for the NACE Cathodic Protection Technician Certifi ca-
tion Examination. Course topics include intermediate-level discussions of corrosion theory
and CP concepts, types of CP systems, AC and DC stray current interference, and advanced
fi eld measurement techniques. This course provides both theoretical knowledge and practical
techniques for testing and evaluating data to determine the effectiveness of both galvanic and
impressed current CP systems and to gather design data. The course involves lectures and
hands-on training with equipment and instruments used in CP testing. Hands-on training at
outdoor facilities is also included, weather permitting. The course concludes with both a 2-
hour written and a 2-hour practical (hands-on) examination.
Who Should Attend This course is designed for persons who have a working knowledge of CP, or who have ex-
tensive years of CP fi eld experience with a technical background. Students must complete a
preliminary application for certifi cation at least 60 days in advance so that education and pre-
requisites can be verifi ed. In-depth high school chemistry and mathematics courses including
algebra, balancing equations, conversions of units, logarithms, and graphs; the NACE Basic Cor-
rosion course, CP 1—Cathodic Protection Tester course or equivalent; and comprehensive
knowledge of electrochemistry, electricity, electrical laws and series and parallel circuits, meter
operation, and CP fundamentals are necessary for understanding the material in this course.
CP 2 —NACE Cathodic Protection Technician
“The CP 2 class was an excellent opportunity to learn more about both the theory and the practice of cathodic protection. The priniciples and methods I learned have helped me in assisting those I supervise in better understanding CP.”—Paul Adling, CP Project SpecialistSouthern California Gas Company
NACE Cathodic Protection Training & Certifi cation 7
Path 1 Path 2 Path 3
3 years CP work experience 1 year CP work experience 2-year post high school training from an
approved math or science technical/trade
school including algebra and logarithms training
PLUS PLUS PLUS
High school diploma or GED including al-
gebra and logarithms training
4-year physical science or engineering degree 2 years’ CP work experience
PLUS PLUS PLUS
Cathodic Protection Tester Certifi cation
or equivalent training
Cathodic Protection Tester Certifi cation or
equivalent training
Cathodic Protection Tester Certifi cation or
equivalent training
Prerequisites For each path, all prerequisites must be met in order to apply for the CP 2—Cathodic Protection Technician Course.
Course Highlights (include but are not limited to)
Corrosion Theory
CP Fundamentals
CP Systems
DC Power Sources
Field Measurements and Instrumentation
Stray Current and CP Interference
Safety Specifi c to CP
CP Recordkeeping
Exam-Only Option is available. Contact NACE for more details. Candidates meeting the prerequisites can sit for the Cathodic Protection Technician Certifi cation
Exam without taking the CP 2-Cathodic Protection Technician course. The Exam Only Option
consists of the same 2-hour written exam and 2-hour hands-on practical exam which are offered
in the CP 2-Cathodic Protection Technician course. Exam-only candidates will be sent a CP 2-
Cathodic Protection Technician course manual at the time of registration. Candidates may only
attend the course on the day of the exam. Examinations will be offered the last day of the regularly
scheduled CP 2–Cathodic Protection Technician course offerings. Contact NACE fi rstService for
more information. Registration fees for exam only candidates are nonrefundable.
8 NACE Cathodic Protection Training & Certifi cation
CP 3 —NACE Cathodic Protection Technologist
Description The CP 3-Cathodic Protection Technologist Course is an intensive 6-day course that presents
CP technology to prepare students for the NACE Cathodic Protection Technologist Certifi ca-
tion Examination. The CP 3-Cathodic Protection Technologist Course builds on the technol-
ogy presented in the CP 2—Cathodic Protection Technician Course covering both theoretical
concepts and practical application of cathodic protection with a strong focus on interpretation
of CP data, CP troubleshooting and mitigation of problems that might arise in both galvanic
and impressed current systems including design calculations for these systems. The course is
presented in a format of lecture, discussion and hands-on, in-class experiments and group exer-
cises. The course concludes with the written Cathodic Protection Technologist examination.
Who Should Attend This course is designed for persons who have extensive CP fi eld experience and a strong tech-
nical background in cathodic protection. Students must complete a preliminary application for
certifi cation at least 60 days in advance so that education and prerequisites can be verifi ed.
“Lear Industries fully supports the NACE Cathodic Protection Training & Certifi cation Program because it gives our employees the tools necessary to deliver the highest quality services and it provides the education necessary for us to be competitive in the industry.”—Lawrence Rearick, CEO, Lear Industries
NACE Cathodic Protection Training & Certifi cation 9
Prerequisites For each path, all prerequisites must be met in order to apply for the CP 3—Cathodic Protec-
tion Technologist Course.
Course Highlights (include but are not limited to)
CP Theory
CP Criteria
CP Interference
Detecting Stray Current, AC Interference, and Telluric Current Interference
CP Design Fundamentals
Design Calculations (circuit resistances, system capacity and life,
number of anodes, driving voltage)
Evaluation of System Performance
Troubleshooting Cathodic Protection Systems
Exam-Only Option is available. Contact NACE for more details.Candidates meeting the prerequisites can sit for the CP 3-Cathodic Protection Technologist Certi-
fi cation. Candidates will take the same two-part examination which is offered in the CP 3-Cathodic
Protection Technologist course. Exam-only candidates will receive a copy of the CP 3–Cathodic
Protection Technologist Course Manual at the time of registration. Examinations will be offered the
last day of the regularly scheduled CP 3–Cathodic Protection Technologist course offerings. Exam-
only candidates may only attend the course on the day of the exam. Contact NACE fi rstService for
more information. Registration fees for exam only candidates are nonrefundable.
Path 1 Path 2 Path 3
8 years CP work experience with progres-
sively increasing technical responsibilities
6 years CP work experience with progres-
sively increasing technical responsibilities
3 years CP work experience with progres-
sively increasing technical responsibilities
PLUS PLUS PLUS
High school diploma or GED 2-year post high school training from an
approved math or science technical/trade
school including algebra and logarithm
training
4-year physical science or engineering degree
PLUS PLUS PLUS
Algebra and logarithms training Cathodic Protection Technician Certifi cation
or equivalent training
Cathodic Protection Technician Certifi cation
or equivalent training
PLUS
Cathodic Protection Technician Certifi cation
or equivalent training
10 NACE Cathodic Protection Training & Certifi cation
CP 4 —NACE Cathodic Protection Specialist
Description The CP 4-Cathodic Protection Specialist Course is an intensive 6-day course that focuses on
the principles and procedures for CP design on a variety of structures for both galvanic and im-
pressed current systems. The course discusses the theoretical concepts behind the design and
considerations that infl uence the design (environment, structure type/materials of construction,
coatings), design factors, and calculations (including attenuation). The course involves lecture
and in-class discussion and practice with design examples on various structures (i.e., pipelines,
tanks and well casings, offshore applications and steel reinforcing in concrete structures). The
course concludes with the written NACE Cathodic Protection Specialist Examination.
Who Should Attend This course is intended for those involved in the design, installation, and maintenance of CP
systems. Prior to taking the exam or the NACE training course, students must have complet-
ed college or university-level courses in algebra, geometry, and trigonometry, and must have
signifi cant amounts of practical experience in CP design. NOTE: The CP Specialist Examination
is challenging, and the CP 4—Cathodic Protection Specialist Course is designed as a refresher
course for persons already meeting the experience and education prerequisites for the exam.
There is not a direct progression from Cathodic Protection Technologist to Cathodic Protec-
tion Specialist. Participating only in the CP 4–Cathodic Protection Specialist Course does not
ensure success on the Cathodic Protection Specialist Examination. Substantial experience
involving all aspects of cathodic protection, including design and formal education in math/sci-
ence/engineering is critical to students’ success in the course and examination. Attendance at
the CP 3-Cathodic Protection Technologist Course is strongly recommended before sitting
for the CP 4-Cathodic Protection Specialist Course or Examination Only Option.
“The NACE CP program provides students with the opportunity to gain the technical knowledge they need to improve their level of credibility and confi -dence in the fi eld.”—David Schramm, Director, System Integrity and Corrosion Services,EN Engineering
NACE Cathodic Protection Training & Certifi cation 11
Prerequisites For each path, all prerequisites must be met in order to register for the CP 4—Cathodic
Protection Specialist Course.
Path 1 Path 2 Path 3
12 years CP work experience, including 4
years in responsible charge
6 years CP work experience, including 4
years in responsible charge
4 years CP work experience in responsible
charge
2-year post-high school training in math or
science from an approved technical/trade
school
4-year physical science or engineering de-
gree
CP Technician Certifi cation or equivalent
training
CP Technician Certifi cation or equivalent
training
PLUS
A Bachelor’s degree in one of the following:
• Engineering
• Physical Sciences
PLUS
An advanced degree in engineering or
physical science that required a qualifi cation
exam, such as:
• P.E., P.Eng., or equivalent
• EIT registration or equivalent
• CP Technician Certifi cation
or equivalent training
Course Highlights (include but are not limited to)
Concept of CP Factors Infl uencing CP Design
CP Systems
Design Factors and Calculations
Design examples for the following structures/environments:
Transmission and Other Pipelines, Tanks, and Well Casings
Marine and Offshore Applications
Water Tanks, Surface Condensers, and Thickeners
Steel Reinforcing in Concrete Structures
Exam-Only Option is available. Contact NACE for more details.Candidates meeting the prerequisites can sit for the CP 4–Cathodic Protection Specialist examina-
tion. Candidates will take the same two part examination which is offered in the CP 4–Cathodic
Protection Specialist course. Exam-only candidates will receive a copy of the CP 4–Cathodic
Protection Specialist course at the time of registration.. Contact NACE fi rstService for more infor-
mation. Registration fees for exam only candidates are nonrefundable.
Pipeline Corrosion Introductory Training—PCITNACE OQ
PCIT—A new dimension of training for the pipeline industry for employees working with corrosion. This is a beginner program for the employee who has little or no experience in the industry and needs to be trainined on basic tasks. Corrosion Operator Qualifi cation (OQ) covered tasks as well as written
assessments and performance verifi cation are included in this program.
Cathodic Protection
CP 1-Cathodic Protection Tester
CP 2-Cathodic Protection Technician
CP 3-Cathodic Protection Technologist
CP 4-Cathodic Protection Specialist
Coatings
CIP
Coatings in Conjunction with Cathodic Protection
Internal CorrosionInternal Corrosion for Pipelines
Pipeline Corrosion Integrity Managment (PCIM) Program
PCIT provides a path into a number of NACE training and certifi cation tracks
for the pipeline industry.
12 NACE Cathodic Protection Training & Certifi cation
Pipeline Corrosion Integrity Management—PCIM
NACE is expanding its curriculum to include a new program focused on pipeline corrosion integrity. Current regulatory require-ments and industry need for training in this area make this program a priority for NACE Education & Training. The program will have two tracks–a fi eld track and an engineering track. The program will emphasize technology, industry standards, regulations
and decision-making directly related to pipeline corrosion integrity management—fi nding corrosion and repairing it.
PCIM Field TrackThis track will focus on remediation technology and
fi eld techniques for carrying out an integrity manage-
ment program.
Courses included in this track:
· Internal Corrosion for Pipelines Course
· Field Techniques for External Corrosion Course—
To take this course, students must fi rst complete
the following prerequisites
· CP 1-Cathodic Protection Tester course
· Coatings in Conjunction with Cathodic Protec-
tion course OR CIP Level 1
PCIM Engineer TrackThis track will focus on the implementation and man-
agement of an integrity program for a pipeline system.
The emphasis at this level is on integrity verifi cation and
maintenance optimization.
Courses included in this track:
· Direct Assessment
· In-line Inspection
· Pipeline Corrosion Integrity Management Course
There are course requirements for each level. Existing NACE training courses will be incorporated into this
program as well as new courses
NACE Cathodic Protection Training & Certifi cation 13Photos 1 and 3 courtesy of Williams Gas Pipeline, LLC
14 NACE Cathodic Protection Training & Certifi cation
NACE understands that the needs of industry are constantly changing.
To help meet these needs, NACE is currently developing the following courses.
CP InterferenceThis is NACE’s fi rst course dedicated solely to the subject of stray current and
CP interference. The course will include in depth coverage of detection, effects,
monitoring and mitigation of DC interference, AC interference and telluric current
interference. Theory, infl uencing factors, deleterious effects, testing, prediction and
analysis, mitigation and, monitoring strategies (survey and monitoring techniques) will
be discussed for each type of interference. The course will be presented in a format
of lecture, hands-on in-class experiments, and group case studies. It is recommended
that students complete at least the CP 2–Cathodic Protection Technician course
prior to attending the CP Interference course.
Marine CP 2-Cathodic Protection Technician A Marine edition of the CP 2-Cathodic Protection Technician Course will soon be
available. Consistent with the existing CP 2 course, the Marine edition will be an
intensive 6-day course that presents CP technology and its application to marine
environments. The course will address CP related to ships and submarines, shore
facilities (docks, piers, etc), offshore structures (oil and gas production platforms),
underwater pipelines and, commercial shipping. The course will be presented in a
format of lecture and hands-on training with equipment and instruments used in
marine CP testing and will conclude with a fi nal examination. Individuals successfully
completing the examination and who have an approved certifi cation application will
receive certifi cation as a Marine Cathodic Protection Technician.
Coatings in Conjunction with Cathodic ProtectionThis course will emphasize the relationship between protective coatings and cathodic
protection on a pipeline system and how these two methods of corrosion control
interact. The course will also provide students with the knowledge and skills to imple-
ment and monitor a corrosion control program that utilizes both methods.
For more information on all NACE courses, visit our Web site at:www.nace.org
1-800-797-NACE (6223) U.S. & Canada
+1 281/228-6223 Outside the U.S. & Canada
E-mail: fi [email protected]
CP Future Program Development
NACE Cathodic Protection Training & Certifi cation 15
Phot
o co
urte
sy o
f Willi
ams
Gas
Pip
elin
e, LL
C
cathodic protection training & certification
Leaders in Corrosion Control Technology
Phone: 1 800 797 NACE (U.S. & Canada) 1 281 228 6223 (Outside U.S. & Canada)E-mail: [email protected]: www.nace.org