28
CPS Oil & Gas Equipments Private Limited
Cementing and CasingAccessories
Gas Lift EquipmentCompletion and DownholeEquipment
Liner Hanger System
PRODUCT LINE
CPS, a company based on Indian values, was established in 2011 with the intention to design &manufacture downhole oil tools for domestic and international market.Manufacturing facility is located in Vasai, Palghar, Maharashtra.CPS operations are managed by professional having immense experience in design &manufacturing. Our engineering team is committed to research and develop high performancetools.
Products & Services
CPS manufactures a wide range of Completion, Production and Service Tools used in variousoperations of Oil and Gas Wells. We have initiated a whole new expertise in designing of toolsas per applicable API standards.
A wide range of Liner Hangers, including Mechanical, Hydraulic with/without rotation, withsingle or multi cone, is manufactured along with the running tools, setting tools andaccessories.
CPS offers a range of cementing and casing accessories - Float Collar, Float Shoe, Reamer Shoe,Guide Shoe, Cementing Plugs, Centralizers and Stop Collars which brings high value to casingrunning and cementing.
CPS manufactures complete range of Mechanical, Hydraulic and Wireline set Permanent andRetrievable Packers. These Packers are tested and stimulated to suit virtually for any operatingenvironmental conditions.Permanent Packers are tested to 15 500 PSI and Retrievable Packers to 13 000 PSI.
CPS offers a variety of gas lift equipment for low-producing wells, high-producing wells, orprolific deepwater wells.
COMPANY PROFILE
COMPLETION PACKERS AND ACCESSORIES
LINER HANGER SYSTEM
GAS LIFT EQUIPMENT
CEMENTING AND CASING ACCESSORIES
CPS has implemented quality management system compliance to ISO 9001:2008 andAPI spec Q1 9th edition and has zeal to improve in all aspects to provide best productsand services.
CPS has testing unit to test and validate products to various API specification.
CPS competitive thrust has been achieved by some stringent quality programs.
CPS has installed quality checks coupled with the best testing facilities and haveinvested in the latest testing equipments.
CPS has innovative and well qualified passionate team to provide engineeredsolutions to all customer requirements.
CPS has latest machineries and quality instruments to meet t he manufacturingrequirements along with desired quality.
WHY US ?
CPS has implemented quality management system compliance to ISO 9001:2008 andAPI spec Q1 9th edition and has zeal to improve in all aspects to provide best productsand services.
CPS has testing unit to test and validate products to various API specification.
CPS competitive thrust has been achieved by some stringent quality programs.
CPS has installed quality checks coupled with the best testing facilities and haveinvested in the latest testing equipments.
CPS has innovative and well qualified passionate team to provide engineeredsolutions to all customer requirements.
CPS has latest machineries and quality instruments to meet t he manufacturingrequirements along with desired quality.
WHY US ?
CPS has implemented quality management system compliance to ISO 9001:2008 andAPI spec Q1 9th edition and has zeal to improve in all aspects to provide best productsand services.
CPS has testing unit to test and validate products to various API specification.
CPS competitive thrust has been achieved by some stringent quality programs.
CPS has installed quality checks coupled with the best testing facilities and haveinvested in the latest testing equipments.
CPS has innovative and well qualified passionate team to provide engineeredsolutions to all customer requirements.
CPS has latest machineries and quality instruments to meet t he manufacturingrequirements along with desired quality.
WHY US ?
CERTIFICATESCERTIFICATESCERTIFICATES
• Liner Hanger System
• Cementing & Casing Accessorieso Float Collaro Float Shoeo Reamer shoeo Conventional cementing plugso Non rotating Cementing plugso Cement Retainero Centralizerso Stop Collarso Pup Jointso Couplings
• Completion and Downhole Equipmento Packerso Anchor Catchero Sliding Sleeveo Bridge Plugo Landing Nippleso Flow Couplings
• Gas Lift Equipmento Conventional Gas Lift Valveso Wireline Retrievable Gas Lift Valveso Conventional Gas Lift Dummieso Wireline Retrievable Gas Lift
Dummieso Conventional Mandrelso Side Pocket Mandrelso Latcheso Check Valves
PRODUCT RANGE
• Liner Hanger System
• Cementing & Casing Accessorieso Float Collaro Float Shoeo Reamer shoeo Conventional cementing plugso Non rotating Cementing plugso Cement Retainero Centralizerso Stop Collarso Pup Jointso Couplings
• Completion and Downhole Equipmento Packerso Anchor Catchero Sliding Sleeveo Bridge Plugo Landing Nippleso Flow Couplings
• Gas Lift Equipmento Conventional Gas Lift Valveso Wireline Retrievable Gas Lift Valveso Conventional Gas Lift Dummieso Wireline Retrievable Gas Lift
Dummieso Conventional Mandrelso Side Pocket Mandrelso Latcheso Check Valves
PRODUCT RANGE
• Liner Hanger System
• Cementing & Casing Accessorieso Float Collaro Float Shoeo Reamer shoeo Conventional cementing plugso Non rotating Cementing plugso Cement Retainero Centralizerso Stop Collarso Pup Jointso Couplings
• Completion and Downhole Equipmento Packerso Anchor Catchero Sliding Sleeveo Bridge Plugo Landing Nippleso Flow Couplings
• Gas Lift Equipmento Conventional Gas Lift Valveso Wireline Retrievable Gas Lift Valveso Conventional Gas Lift Dummieso Wireline Retrievable Gas Lift
Dummieso Conventional Mandrelso Side Pocket Mandrelso Latcheso Check Valves
PRODUCT RANGE
Mechanical LinerHanger
Hydraulic Liner Hanger
In hydraulic type we set the hanger by applying pressure through therun-in string, and is designed to support medium to heavy liner loads.The hanger is widely used in deep and high angle wells, whereactuation of mechanical-set hangers may not be preferred.Hydraulic liner hanger is couple with running tools, pack off bushing,hydraulic landing collar, float collar(if required), float shoe and othertools.
Mechanical Liner Hanger
The Mechanical Dovetail Slip Hanger (MDLH & MRDLH) is a premiumhanger with an integral body. The hanger mandrel is machined fromheavy wall mechanical tubing and treated to the required grade.Integral construction eliminates all internal connections which providemaximum pressure ratings and liner hanging capacity.
LINER HANGER SYSTEM
SIZE SPECIFICATION TABLE
Hydraulic LinerHanger
Accessories
Hydraulic Landing Collar
The hydraulic landing collar has an internal ball seat, and is run witha Hydraulic Liner Hanger. The HLC is run two or three joints from theshoe, and is used to land the Liner Wiper Plugs (LWP). The LWPprovides a pressure seal from above and below and are easily PDCdrillable.
Mechanical Landing Collar
The mechanical plug landing collar (MPLC) is run two or three jointsfrom bottom, and is used to land the Liner Wiper Plug (LWP). TheLWP provides a pressure seal that holds pressure from above andbelow and are easily PDC drillable.
Drillable Pack Off Bushing
The drillable pack-off bushing (DPOB) is a high pressure, hightemperature pack-off used when working with high angle well bores.The DPOB has chevron type packing that seal tightly around thepolished Cementing Seal Joint.The DPOB hold pressure from above and below and is not damagedfrom rotation during setting and releasing of liners.
Tie Back Seal Nipple
The tieback seal nipple (TBSN) has proven to be a superior methodof extending the liner to the surface of the well. Using the polishedbore receptacle of the Setting Collar (SC) or the Liner Lap Packer(LLPH) packer, this assembly facilitates the entry and subsequentseal of the nipple into the bore.
LINER HANGER SYSTEM
Tie Back Seal Nipple
Hydraulic LandingNipple
Mechanical LandingNipple
Drillable Pack offBushing
Float Equipment
Single Valve Float Collar (SVFC) and the Double Valve Float Collar (DVFC)acts as an extra back pressure valve sealing against pressure from belowwhen floating in a liner or casing. The positive action, back pressure balland seat valve constructed of thermal plastic ensures a secure seal. TheSVFC or DVFC have no internal connections and is highly resistant toabrasive fluids, corrosion, and temperature.
The Double Valve Float Shoe, Spaded Nose (DVFS-SN) features backpressure valves and a spaded nose with circulating side ports. The sideports are used when liners are set on bottom, this improves cementingoperations. The DVFS-SN is easily PDC drillable.
Drill Pipe Wiper Plug
The DPWP with Rotation Prevention Clutch on the nose of the plug lands,and locks in place in the seat of the liner wiper plug. The plugs then land,latch, and seal in the landing collar.
Liner Wiper Plug
The Liner Wiper Plug (LWP) with Rotation Prevention Clutch on the noseof the plug lands and locks in place in the seat of the landing collar. Boththe DPWP and the LWP act to hold pressure from above and below.
LINER HANGER SYSTEM
Drill Pipe Wiper Plug
Liner Wiper Plug
Float Shoe
Float Collar
Float Shoe
Float Shoe
Float Collar
Float collar is installed one or three joints above guide shoe or floatshoe. It works as landing platform for cementing plug during thecementing operation. The area between float collar and float shoecontains semi-contaminated fluid collected through wiping action ofcementing plug, during the float shoe against the contaminated fluid.CPS provides float collar ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float collar can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled etc.
Float Shoe
Float shoe performs all the functions which a guide shoe performs, inaddition a one way check valve is assembled inside it which preventsbackflow of fluid inside the casing after cement placement in annuluswhile it allows circulation down through the casing.CPS provides float shoe ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float shoe can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled, differentnoses and port combinations etc.
Reamer Shoe
Reamer Shoe is float shoe designed for potentially difficult wellbores having obstructions,swelling shales, ledges, etc.
Spiral Vanes – For Non aggressive reaming action. It reduces torque build up on threadconnections.
Carbide Tips – For Tight Spots. These tips are provided in Hard Die Steel and Carbidematerial.
Eccentric Nose– For guiding casing to total depth while running in hole.
Drillability– PDC Drillable.
Surge Pressure reduction on formations
CEMENTING & CASING ACCESSORIES
Float CollarFloat Collar
Float Shoe
Float Shoe
Float Collar
Float collar is installed one or three joints above guide shoe or floatshoe. It works as landing platform for cementing plug during thecementing operation. The area between float collar and float shoecontains semi-contaminated fluid collected through wiping action ofcementing plug, during the float shoe against the contaminated fluid.CPS provides float collar ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float collar can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled etc.
Float Shoe
Float shoe performs all the functions which a guide shoe performs, inaddition a one way check valve is assembled inside it which preventsbackflow of fluid inside the casing after cement placement in annuluswhile it allows circulation down through the casing.CPS provides float shoe ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float shoe can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled, differentnoses and port combinations etc.
Reamer Shoe
Reamer Shoe is float shoe designed for potentially difficult wellbores having obstructions,swelling shales, ledges, etc.
Spiral Vanes – For Non aggressive reaming action. It reduces torque build up on threadconnections.
Carbide Tips – For Tight Spots. These tips are provided in Hard Die Steel and Carbidematerial.
Eccentric Nose– For guiding casing to total depth while running in hole.
Drillability– PDC Drillable.
Surge Pressure reduction on formations
CEMENTING & CASING ACCESSORIES
Float CollarFloat Collar
Float Shoe
Float Shoe
Float Collar
Float collar is installed one or three joints above guide shoe or floatshoe. It works as landing platform for cementing plug during thecementing operation. The area between float collar and float shoecontains semi-contaminated fluid collected through wiping action ofcementing plug, during the float shoe against the contaminated fluid.CPS provides float collar ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float collar can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled etc.
Float Shoe
Float shoe performs all the functions which a guide shoe performs, inaddition a one way check valve is assembled inside it which preventsbackflow of fluid inside the casing after cement placement in annuluswhile it allows circulation down through the casing.CPS provides float shoe ranging from 2-7/8" to 20". Other sizes can beprovided on request.Float shoe can be provided with single/double valve, stab in/stab inlatch, non-cement filled (for size upto 4-1/2"), cement filled, differentnoses and port combinations etc.
Reamer Shoe
Reamer Shoe is float shoe designed for potentially difficult wellbores having obstructions,swelling shales, ledges, etc.
Spiral Vanes – For Non aggressive reaming action. It reduces torque build up on threadconnections.
Carbide Tips – For Tight Spots. These tips are provided in Hard Die Steel and Carbidematerial.
Eccentric Nose– For guiding casing to total depth while running in hole.
Drillability– PDC Drillable.
Surge Pressure reduction on formations
CEMENTING & CASING ACCESSORIES
Float Collar
Conventional Cementing Plugs
Non-Rotating Cementing Plugs
Cementing Plugs
Cementing Plugs are used for wiping out the Inner wall of casing string and minimizecontamination of cement slurry. There are two types:
• Conventional Cementing Plugs• Non-Rotating Cementing plugs
CPS provides cementing plugs ranging from 4-1/2" to 13-3/8". Other sizes can be provided onrequest.
Conventional Cementing Plugs
Conventional Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The fins havegreater wiper contact area with greater wearresistance. The area between float collar and floatshoe contains semi-contaminated fluid collectedthrough wiping action of cementing plug.
Non-Rotating Cementing Plugs
Non-rotating Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The Non-rotating insert in bottom plug latches in non-rotating profile in float shoe/collar. The Non-rotating insert in top plug latches in non-rotatingprofile in bottom plug. This action prevents rotationof plug and considerably reduces drilling time.
CEMENTING & CASING ACCESSORIES
Conventional Cementing Plugs
Non-Rotating Cementing Plugs
Cementing Plugs
Cementing Plugs are used for wiping out the Inner wall of casing string and minimizecontamination of cement slurry. There are two types:
• Conventional Cementing Plugs• Non-Rotating Cementing plugs
CPS provides cementing plugs ranging from 4-1/2" to 13-3/8". Other sizes can be provided onrequest.
Conventional Cementing Plugs
Conventional Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The fins havegreater wiper contact area with greater wearresistance. The area between float collar and floatshoe contains semi-contaminated fluid collectedthrough wiping action of cementing plug.
Non-Rotating Cementing Plugs
Non-rotating Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The Non-rotating insert in bottom plug latches in non-rotating profile in float shoe/collar. The Non-rotating insert in top plug latches in non-rotatingprofile in bottom plug. This action prevents rotationof plug and considerably reduces drilling time.
CEMENTING & CASING ACCESSORIES
Conventional Cementing Plugs
Non-Rotating Cementing Plugs
Cementing Plugs
Cementing Plugs are used for wiping out the Inner wall of casing string and minimizecontamination of cement slurry. There are two types:
• Conventional Cementing Plugs• Non-Rotating Cementing plugs
CPS provides cementing plugs ranging from 4-1/2" to 13-3/8". Other sizes can be provided onrequest.
Conventional Cementing Plugs
Conventional Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The fins havegreater wiper contact area with greater wearresistance. The area between float collar and floatshoe contains semi-contaminated fluid collectedthrough wiping action of cementing plug.
Non-Rotating Cementing Plugs
Non-rotating Cementing Plugs feature rubber finsto wipe out inner wall of casing string. The Non-rotating insert in bottom plug latches in non-rotating profile in float shoe/collar. The Non-rotating insert in top plug latches in non-rotatingprofile in bottom plug. This action prevents rotationof plug and considerably reduces drilling time.
CEMENTING & CASING ACCESSORIES
Cement Retainer
Wireline set cement retainer is a high quality tool for squeeze cementing. The bypass valve iscontrolled from the surface by simply picking up to close and setting down to open. The valve isautomatically closed when the stinger is removed from the retainer. This retainer plug sustainshigh pressure and temperature.
CPS provides cement retainers ranging from 4-1/2" to 5-1/2".
Features
• Electric wireline set
• Drillable
• Cast iron construction
• One piece slips - hardened to depth of wicker only
• Sets in any grade casing including P-110
• Metal back-up rings prevent rubber extrusion
• For temporary or permanent service
• Ratcheting lock ring holds setting force
• Small OD for speed and safety when running
CEMENTING & CASING ACCESSORIES
Cement Retainers
Cement Retainer
Wireline set cement retainer is a high quality tool for squeeze cementing. The bypass valve iscontrolled from the surface by simply picking up to close and setting down to open. The valve isautomatically closed when the stinger is removed from the retainer. This retainer plug sustainshigh pressure and temperature.
CPS provides cement retainers ranging from 4-1/2" to 5-1/2".
Features
• Electric wireline set
• Drillable
• Cast iron construction
• One piece slips - hardened to depth of wicker only
• Sets in any grade casing including P-110
• Metal back-up rings prevent rubber extrusion
• For temporary or permanent service
• Ratcheting lock ring holds setting force
• Small OD for speed and safety when running
CEMENTING & CASING ACCESSORIES
Cement Retainers
Cement Retainer
Wireline set cement retainer is a high quality tool for squeeze cementing. The bypass valve iscontrolled from the surface by simply picking up to close and setting down to open. The valve isautomatically closed when the stinger is removed from the retainer. This retainer plug sustainshigh pressure and temperature.
CPS provides cement retainers ranging from 4-1/2" to 5-1/2".
Features
• Electric wireline set
• Drillable
• Cast iron construction
• One piece slips - hardened to depth of wicker only
• Sets in any grade casing including P-110
• Metal back-up rings prevent rubber extrusion
• For temporary or permanent service
• Ratcheting lock ring holds setting force
• Small OD for speed and safety when running
CEMENTING & CASING ACCESSORIES
Cement Retainers
Hinged Non-weldedBow Spring Centralizer
Hinged WeldedBow Spring Centralizer
Slip On WeldedBow Spring Centralizer
Hinged Non-weldedBow Spring Turbolizer
Slip On WeldedBow Spring Turbolizer
Hinged WeldedBow Spring Turbolizer
Centralizers
Centralizers are used for centralization of casing string. Proper centralization of casing string isof much importance for quality primary cementing. Improper Centralization can lead to variouscementing problems such as zonal isolation and inappropriate casing support. There are twotypes:
• Bow Spring Centralizer• Rigid Centralizer (Positive rigid and solid rigid centralizer)
CPS provides centralizers ranging from 4-1/2" to 13-3/8".
CEMENTING & CASING ACCESSORIES
Hinged Non-weldedBow Spring Centralizer
Hinged WeldedBow Spring Centralizer
Slip On WeldedBow Spring Centralizer
Hinged Non-weldedBow Spring Turbolizer
Slip On WeldedBow Spring Turbolizer
Hinged WeldedBow Spring Turbolizer
Centralizers
Centralizers are used for centralization of casing string. Proper centralization of casing string isof much importance for quality primary cementing. Improper Centralization can lead to variouscementing problems such as zonal isolation and inappropriate casing support. There are twotypes:
• Bow Spring Centralizer• Rigid Centralizer (Positive rigid and solid rigid centralizer)
CPS provides centralizers ranging from 4-1/2" to 13-3/8".
CEMENTING & CASING ACCESSORIES
Hinged Non-weldedBow Spring Centralizer
Hinged WeldedBow Spring Centralizer
Slip On WeldedBow Spring Centralizer
Hinged Non-weldedBow Spring Turbolizer
Slip On WeldedBow Spring Turbolizer
Hinged WeldedBow Spring Turbolizer
Centralizers
Centralizers are used for centralization of casing string. Proper centralization of casing string isof much importance for quality primary cementing. Improper Centralization can lead to variouscementing problems such as zonal isolation and inappropriate casing support. There are twotypes:
• Bow Spring Centralizer• Rigid Centralizer (Positive rigid and solid rigid centralizer)
CPS provides centralizers ranging from 4-1/2" to 13-3/8".
CEMENTING & CASING ACCESSORIES
Hinged Non-welded Semi-rigidBow Spring Centralizer
Single PieceBow Spring Centralizer
Hinged Non-weldedPositive Rigid Centralizer
Spiral Vane Slip On WeldedPositive Rigid Centralizer
Straight Vane Slip On WeldedPositive Rigid Centralizer
Straight VaneSolid Rigid Centralizer
Spiral VaneSolid Rigid Centralizer
Straight VaneSolid Rigid Centralizer (Fixed)
Spiral VaneSolid Rigid Centralizer (Fixed)
CEMENTING & CASING ACCESSORIES
Hinged Non-welded Semi-rigidBow Spring Centralizer
Single PieceBow Spring Centralizer
Hinged Non-weldedPositive Rigid Centralizer
Spiral Vane Slip On WeldedPositive Rigid Centralizer
Straight Vane Slip On WeldedPositive Rigid Centralizer
Straight VaneSolid Rigid Centralizer
Spiral VaneSolid Rigid Centralizer
Straight VaneSolid Rigid Centralizer (Fixed)
Spiral VaneSolid Rigid Centralizer (Fixed)
CEMENTING & CASING ACCESSORIES
Hinged Non-welded Semi-rigidBow Spring Centralizer
Single PieceBow Spring Centralizer
Hinged Non-weldedPositive Rigid Centralizer
Spiral Vane Slip On WeldedPositive Rigid Centralizer
Straight Vane Slip On WeldedPositive Rigid Centralizer
Straight VaneSolid Rigid Centralizer
Spiral VaneSolid Rigid Centralizer
Straight VaneSolid Rigid Centralizer (Fixed)
Spiral VaneSolid Rigid Centralizer (Fixed)
CEMENTING & CASING ACCESSORIES
Hinged Bolted Stop Collar Hinged Set Screw Stop Collar
Hinged Spiral Nail Stop Collar Slip On Set Screw Stop Collar
Stop Collars
CEMENTING & CASING ACCESSORIES
Hinged Bolted Stop Collar Hinged Set Screw Stop Collar
Hinged Spiral Nail Stop Collar Slip On Set Screw Stop Collar
Stop Collars
CEMENTING & CASING ACCESSORIES
Hinged Bolted Stop Collar Hinged Set Screw Stop Collar
Hinged Spiral Nail Stop Collar Slip On Set Screw Stop Collar
Stop Collars
CEMENTING & CASING ACCESSORIES
Pup joints
A pup joint is a pipe of non-standard length used to adjust the length of tubular strings to itsexact requirement. API casing and tubing pup joints are manufactured according to API Spec5CT .Pup joints are available in 2.0' ,3.0', 4.0', 6.0',8.0' and 10.0' length with upset and non upsetdesign.
Couplings
A short length of pipe used to connect twojoints of casing. A casing/tubing coupling hasinternal threads (female thread form) machined tomatch the external threads (male thread form) ofthe long joints of casing/tubing. The two joints ofcasing are threaded into opposite ends of thecasing coupling.
Couplings are available in EU, NU, LTC, STC and BTCthread. Coupling dimension will be as per APIspecification.
CEMENTING & CASING ACCESSORIES
Packers
The casing sizes in which CPS provides the packers are from size 4-1/2" to 9-5/8" with tubingconnection from size 2-3/8"- 3-1/2".
Mechanical Packer
This type of packers are set by some form of tubing movement, usually arotation or upward /downward motion. We have supplied different sizesof packer to our worldwide customers.
Hydraulic Packer
This type of packers are use fluid pressure to drive the cone behind theslips. Once set they remain set by the use of either entrapped pressure ora mechanical lock. They are released by picking up the tubing. They aregood for use in deviated or crooked holes where tubing movement isrestricted or unwanted. The tubing can be hung in neutral tension.
Dual Bore Packer
This is basically a “mid-string” isolation packer that is designed to seal offapproximately two strings of tubing. The dual bore packer allows thesimultaneous production of two zones while keeping them isolated. Mostmultiple-string packers are retrievable; however, some permanentmodels exist for use in HP/HT applications. Standard configurations havebidirectional slips to prevent movement and maintain packoff with thetubing landed in the neutral condition.
COMPLETION AND DOWNHOLE EQUIPMENT
Hydraulic Packer
Mechanical Packer
Anchor Catcher
Anchor Catcher is a Retrievable Double Grip Tubing Anchor designed to anchor the tubing stringin tension or compression. When installed with the proper amount of tubing tension, this anchorprevents movement of the Tubing String during rod pumping operations.
COMPLETION AND DOWNHOLE EQUIPMENT
Anchor Catcher
Anchor Catcher is a Retrievable Double Grip Tubing Anchor designed to anchor the tubing stringin tension or compression. When installed with the proper amount of tubing tension, this anchorprevents movement of the Tubing String during rod pumping operations.
COMPLETION AND DOWNHOLE EQUIPMENT
Anchor Catcher
Anchor Catcher is a Retrievable Double Grip Tubing Anchor designed to anchor the tubing stringin tension or compression. When installed with the proper amount of tubing tension, this anchorprevents movement of the Tubing String during rod pumping operations.
COMPLETION AND DOWNHOLE EQUIPMENT
Sliding Sleeve
A completion device that can be operated to provide a flow path between theproduction conduit and the annulus. Sliding sleeves incorporate a system of ports that can beopened or closed by a sliding component that is generally controlled and operated byslickline tool string.
COMPLETION AND DOWNHOLE EQUIPMENT
Sliding Sleeve
A completion device that can be operated to provide a flow path between theproduction conduit and the annulus. Sliding sleeves incorporate a system of ports that can beopened or closed by a sliding component that is generally controlled and operated byslickline tool string.
COMPLETION AND DOWNHOLE EQUIPMENT
Sliding Sleeve
A completion device that can be operated to provide a flow path between theproduction conduit and the annulus. Sliding sleeves incorporate a system of ports that can beopened or closed by a sliding component that is generally controlled and operated byslickline tool string.
COMPLETION AND DOWNHOLE EQUIPMENT
Bridge Plug
A downhole tool that is located and set to isolate the lower part of the wellbore. Bridge plugsmay be permanent or retrievable, enabling the lower wellbore to be permanently sealedfrom production or temporarily isolated for a treatment to be conducted on an upper zone.
We deal in wireline type bridge plug ranging from 2-3/8" to 13-3/8" which we supply in two designs:
1. Big Boy bridge plug
2. Midget bridge plug
COMPLETION AND DOWNHOLE EQUIPMENT
Big Boy Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including
P-110 Form-fitting metal back-ups prevent
rubber extrusion For temporary or permanent service Ratcheting lock ring holds setting
force
Midget Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including P-
110 For temporary or permanent service Ratcheting lock ring holds setting
force
Bridge Plug
A downhole tool that is located and set to isolate the lower part of the wellbore. Bridge plugsmay be permanent or retrievable, enabling the lower wellbore to be permanently sealedfrom production or temporarily isolated for a treatment to be conducted on an upper zone.
We deal in wireline type bridge plug ranging from 2-3/8" to 13-3/8" which we supply in two designs:
1. Big Boy bridge plug
2. Midget bridge plug
COMPLETION AND DOWNHOLE EQUIPMENT
Big Boy Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including
P-110 Form-fitting metal back-ups prevent
rubber extrusion For temporary or permanent service Ratcheting lock ring holds setting
force
Midget Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including P-
110 For temporary or permanent service Ratcheting lock ring holds setting
force
Bridge Plug
A downhole tool that is located and set to isolate the lower part of the wellbore. Bridge plugsmay be permanent or retrievable, enabling the lower wellbore to be permanently sealedfrom production or temporarily isolated for a treatment to be conducted on an upper zone.
We deal in wireline type bridge plug ranging from 2-3/8" to 13-3/8" which we supply in two designs:
1. Big Boy bridge plug
2. Midget bridge plug
COMPLETION AND DOWNHOLE EQUIPMENT
Big Boy Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including
P-110 Form-fitting metal back-ups prevent
rubber extrusion For temporary or permanent service Ratcheting lock ring holds setting
force
Midget Bridge Plug
Electric wireline set Drillable Cast iron construction One piece slips - hardened to wicker Sets in any grade casing including P-
110 For temporary or permanent service Ratcheting lock ring holds setting
force
CXN Profile LandingNipple
Landing Nipple
A completion component fabricated as a short section of heavy wall tubular with a machinedinternal surface that provides a seal area and a locking profile. Landing nipples are included inmost completions at predetermined intervals to enable the installation of flow-control devices,such as plugs and chokes. CPS provides following types of landing nipples:
X profile landing nipple XN profile landing nipple
Material Grade: 4140/ L-80, 9Cr and 13Cr. Other material grade can be provided on request.
Size SealBore
NoGo Bore (for XNProfile)
1.87 1.875 1.7912.31 2.313 2.2052.75 2.750 2.6322.81 2.812 2.6663.81 3.812 3.725
Features
Large Bore for minimum restriction
Universal nipple with one internal profile
Retractable locking Keys
Locks designed to hold pressure from above orbelow from sudden reversal
Optional hold down
Interference hold-down for smaller locks Shear pin hold-down for larger locks
COMPLETION AND DOWNHOLE EQUIPMENT
SIZE SPECIFICATION TABLE
CX Profile LandingNipple
Flow Couplings
Flow couplings are installed in the tubing opposite perforations in wells with two or morezones. These are heavy walled and are sized to help prevent tubing damage from the jettingaction of the zone perforations. It should be installed above and below landing nipples or otherrestrictions that may cause turbulent flow. Help to extend the life of the well completion. Basicapplications are to help inhibit erosion caused by jetting action near perforations, installedopposite perforations in one or more zones. Furnished in various grades of materials withrequired end connections and different lengths to meet our customer’s as well as API standardrequirements.
CPS provides flow couplings ranging from 2-7/8" to 3-1/2".
COMPLETION AND DOWNHOLE EQUIPMENT
Flow Couplings
Flow couplings are installed in the tubing opposite perforations in wells with two or morezones. These are heavy walled and are sized to help prevent tubing damage from the jettingaction of the zone perforations. It should be installed above and below landing nipples or otherrestrictions that may cause turbulent flow. Help to extend the life of the well completion. Basicapplications are to help inhibit erosion caused by jetting action near perforations, installedopposite perforations in one or more zones. Furnished in various grades of materials withrequired end connections and different lengths to meet our customer’s as well as API standardrequirements.
CPS provides flow couplings ranging from 2-7/8" to 3-1/2".
COMPLETION AND DOWNHOLE EQUIPMENT
Flow Couplings
Flow couplings are installed in the tubing opposite perforations in wells with two or morezones. These are heavy walled and are sized to help prevent tubing damage from the jettingaction of the zone perforations. It should be installed above and below landing nipples or otherrestrictions that may cause turbulent flow. Help to extend the life of the well completion. Basicapplications are to help inhibit erosion caused by jetting action near perforations, installedopposite perforations in one or more zones. Furnished in various grades of materials withrequired end connections and different lengths to meet our customer’s as well as API standardrequirements.
CPS provides flow couplings ranging from 2-7/8" to 3-1/2".
COMPLETION AND DOWNHOLE EQUIPMENT
Conventional Gas LiftValve
Conventional Gas Lift Valves
The CPS conventional (tubing retrievable) Injection PressureOperated Gas Lift Valve is manufactured in 1" or 1-1/2" O.D. TheConventional Valve is controlled by injection gas pressure. Thevalve is used to control gas pressure and its flow from the casingannulus into the tubing during gas lift operations. The valve isinstalled on a conventional mandrel.
Check Valves
The Check Valve is a conventional (tubing retrievable) check valvethat comes in 1" or 1-1/2" O.D. The check valve is installedexternally on conventional mandrels and chemical injection subs.Reverse flow checks prevent gas and fluid flow from the tubingback into the casing annulus. In operation, the reverse flow checkvalve utilizes a dual seating system.
GAS LIFT EQUIPMENT
Check Valve
Conventional Gas LiftValve
Conventional Gas Lift Valves
The CPS conventional (tubing retrievable) Injection PressureOperated Gas Lift Valve is manufactured in 1" or 1-1/2" O.D. TheConventional Valve is controlled by injection gas pressure. Thevalve is used to control gas pressure and its flow from the casingannulus into the tubing during gas lift operations. The valve isinstalled on a conventional mandrel.
Check Valves
The Check Valve is a conventional (tubing retrievable) check valvethat comes in 1" or 1-1/2" O.D. The check valve is installedexternally on conventional mandrels and chemical injection subs.Reverse flow checks prevent gas and fluid flow from the tubingback into the casing annulus. In operation, the reverse flow checkvalve utilizes a dual seating system.
GAS LIFT EQUIPMENT
Check Valve
Conventional Gas LiftValve
Conventional Gas Lift Valves
The CPS conventional (tubing retrievable) Injection PressureOperated Gas Lift Valve is manufactured in 1" or 1-1/2" O.D. TheConventional Valve is controlled by injection gas pressure. Thevalve is used to control gas pressure and its flow from the casingannulus into the tubing during gas lift operations. The valve isinstalled on a conventional mandrel.
Check Valves
The Check Valve is a conventional (tubing retrievable) check valvethat comes in 1" or 1-1/2" O.D. The check valve is installedexternally on conventional mandrels and chemical injection subs.Reverse flow checks prevent gas and fluid flow from the tubingback into the casing annulus. In operation, the reverse flow checkvalve utilizes a dual seating system.
GAS LIFT EQUIPMENT
Check Valve
Conventional Mandrel
CPS conventional mandrels are designed to receive 1" and 1-1/2"conventional gas lift valves. These valves are mounted externally onthe mandrel body. Our conventional mandrels feature external sideguards to protect the gas lift valve and check.
Mandrels are available in standard sizes 2-3/8", 2-7/8" and 3-1/2" inJ-55, N-80, L-80 and P110 materials. We can also accommodate 4-1/2" and 5- 1/2" sizes along with 13 Cr material by special order.
GAS LIFT EQUIPMENT
Conventional Mandrel
CPS conventional mandrels are designed to receive 1" and 1-1/2"conventional gas lift valves. These valves are mounted externally onthe mandrel body. Our conventional mandrels feature external sideguards to protect the gas lift valve and check.
Mandrels are available in standard sizes 2-3/8", 2-7/8" and 3-1/2" inJ-55, N-80, L-80 and P110 materials. We can also accommodate 4-1/2" and 5- 1/2" sizes along with 13 Cr material by special order.
GAS LIFT EQUIPMENT
Conventional Mandrel
CPS conventional mandrels are designed to receive 1" and 1-1/2"conventional gas lift valves. These valves are mounted externally onthe mandrel body. Our conventional mandrels feature external sideguards to protect the gas lift valve and check.
Mandrels are available in standard sizes 2-3/8", 2-7/8" and 3-1/2" inJ-55, N-80, L-80 and P110 materials. We can also accommodate 4-1/2" and 5- 1/2" sizes along with 13 Cr material by special order.
GAS LIFT EQUIPMENT
Wireline IPO Gas Lift Valve
The CPS IPO gas lift valve is a wireline retrievable injectionpressure operated gas lift valve that comes in 1"or 1-1/2" OD. Thisvalve is primarily controlled by injection gas pressure. The valve isused to control gas pressure and its flow from the casingannulus into the tubing during gas lift operations. The valve isinstalled in side pocket mandrels.
The valve is constructed of premium materials for corrosionresistance in wells with high concentrations of H2S and/or CO2.Packing and elastomeric materials for the valve are available forstandard and special service.
GAS LIFT EQUIPMENT
WL Gas Lift Valve
Wireline Dummy Valve
The CPS 1.5” and 1.0” Dummy Valves are Wireline Retrievablenon-equalizing isolation tools designed to install in a side pocketmandrel. Dummy Valves are in 1.0" O.D. tools and are designedfor industry standard 1.0" side pockets. The is a 1-1/2" O.D. tool,which is designed to be installed in industry standard 1-1/2" sidepockets.
Wireline Orifice Valve
The CPS Wireline Retrievable Orifice Valve is a 1.0" or 1-1/2" O.D.valve used to control the flow of gas and/or fluid from the casingannulus into the tubing. The valve is installed in side pocketmandrels. The valve is designed with a square edged orifice which,when properly sized, allows volume control when the casing andtubing pressures are known. An integral reverse flow checkprevents gas and or fluid from flowing from the tubing back intothe casing annulus. The CPS valve consists of a flow barrel, seathousing and floating square edged orifice, lower packing retainer,and check nose with a reverse flow check drop.
GAS LIFT EQUIPMENT
WL Orifice Valve
WL Dummy Valve
Side Pocket Mandrel
CPS side pocket mandrel features an oval body design and threaded connections for installationin the tubing string. Oval-body mandrel design is ideal for dual-completion applications andreduce overall running clearances. The pocket is designed with profiles and seal bores to acceptwireline retrievable flow control devices. These mandrels can be provided with EU and/orpremium thread configurations.
The pocket of the side pocket mandrel is offset from bore of the tubing string allowing fulltubing drift for well servicing operations. The pocket of mandrel is designed with integraldeflector profile to guide the tools inside the pocket sealing bore and deflects tools larger thanthe running and pulling tools.
Mandrels are available in standard sizes 2-3/8", 2-7/8"and 3-1/2".
Gas Lift Latches
CPS's Wireline Retrievable Latches are designed tosecure Retrievable Gas Lift Valves and any other flowcontrol devices, such as chemical injection valves andwater flood valves, into the appropriate side pocketmandrels equipped with 1" or 1-1/2" outsidediameter receiver pockets. All the running post andbodies for the BK-2 and RK model latches are drilledand pinned.
GAS LIFT EQUIPMENT
Latches
For any further query please contact us on
REGD. OFFICE -. 23-28 , PHASE V, PARMAR TECHNO CENTRE, WESTERN EXPRESS HIGHWAY ,VASAI EAST, THANE DIST., MAHARASHTRA, INDIA-401208
CONTACT NUMBER: - +91 7028971169EMAIL : - [email protected], [email protected]
