Create New MEW Account 2

Step 1: Go to https://www.myetherwallet.com/ 2 Step 2: Go to the “New Wallet” Tab 2 Step 3: Enter a Strong Password 3 Step 4: Save Your Keystore File 3 Step 5 (optional): Backup Your Private Key 4 Step 6: Unlock Your Wallet to View the Public Address 5 Step 7: Save Your Public Address 6

Using Existing Account 8 Step 1: Go to https://www.myetherwallet.com/ 8 Step 2: Go to the “View Wallet Info” Tab 8 Step 3: Unlock Your Wallet to View the Public Address 9 Step 4: Save Your Public Address 10

Sending ETH to the Enjin Token Sale Address and Buying ENJ 11 Step 1: Go to https://enjincoin.io/ 30 minutes Before the Start of the Enjin Token Sale 11 Step 2: Go to https://www.myetherwallet.com/ 11 Step 3: Go to the “Send Ether & Tokens” Tab 12 Step 4: Send ETH to the Token Sale Address 12

How Can I See My ENJ? 15

Acquiring Ether (ETH) 16

Frequently Asked Questions 17 Why can’t I see my balances when I unlock my wallet? 17 Why can’t I see the account I have just created in the blockchain explorer (e.g., Etherchain, Etherscan)? 17 I am trying to unlock my wallet but it keeps freezing / hanging. 17 Transaction Failed - "Out of Gas" 18 How does MyEtherWallet actually work? 18 Where can I get more help? 19

Create New MEW Account If you have an existing MyEtherWallet account, please skip this section and jump to the next section, “Using Existing Account.”

Step 1: Go to https://www.myetherwallet.com/ Go to the MyEtherWallet website at https://www.myetherwallet.com. Make sure that you access the website via an HTTPS address. If you’re using Chrome, you should see a green lock notification in the address bar:

Step 2: Go to the “New Wallet” Tab

Step 3: Enter a Strong Password Enter a password that will be used to access your wallet:

1. Create a strong password, using upper and lower-case letters, and also numbers and symbols (e.g., “#”, “@”, etc.).

2. Do not lose this password. Losing this password is equivalent to losing all ETH and ENJ stored in your account.

Click on the “Create New Wallet” button.

Step 4: Save Your Keystore File This file contains your private and public keys and is required every time you want to access your account.

Please note that you won’t be able to access your account without this file and the password from the previous step. Losing either one of them is equivalent to losing all ETH and ENJ stored in your account.

Step 5 (optional): Backup Your Private Key If you would like to make this account accessible by other Ethereum wallets, you can export and backup your private key. You should never share your private keys with anyone else. If your wallet address is the equivalent of your bank account number, then your private wallet key is your PIN. If anyone obtains your private key, they will have access to all of your funds.

Step 6: Unlock Your Wallet to View the Public Address Follow the instructions to unlock your wallet and get your public address: Select the “Keystore File (UTC / JSON)” and select the keystore file you’ve downloaded in the previous step.

Input the password you set on step 3 and click on the “Unlock” button to unlock it.

Step 7: Save Your Public Address Now that you have created the wallet you should now be able to see your Ethereum public address under the “Your Address” label or the “Account Address” section.

You will need to provide this public address during your registration for the Enjin token sale. Do not lose your password and the keystore file, as you will need to use them in the Enjin token sale.

Using Existing Account

Step 1: Go to https://www.myetherwallet.com/ Go to the MyEtherWallet website at https://www.myetherwallet.com. Make sure that you access the website via an HTTPS address. If you’re using Chrome, you should see a green lock notification in the address bar:

Step 2: Go to the “View Wallet Info” Tab

Step 3: Unlock Your Wallet to View the Public Address Select the “Keystore File (UTC / JSON)” and the keystore file or any method you wish to connect(we’ll be using the “Keystore File (UTC / JSON)” method for this guide):

Input your password and click on the “Unlock” button to unlock it:

Step 4: Save Your Public Address At this stage, you’ll see your Ethereum public address under the “Your Address” label or the “Account Address” section.

You will need to provide this public address during your registration to the ENJ token sale event. Do not lose your password and the keystore file, as you will need to use them in the ENJ token sale event.

Sending ETH to the Enjin Token Sale Address and Buying ENJ Make sure that you have enough ETH in your wallet to cover your participation as well as a small transaction fee on the Ethereum blockchain, known as “gas”.

Step 1: Go to https://enjincoin.io/ 30 minutes Before the Start of the Enjin Token Sale The token sale is scheduled to begin at 5:00am PDT October 3rd, 2017 and end at 11:59pm PDT on October 31st, 2017, or until the hard cap is reached. We will publish the token sale address at least 30 minutes before the start of the token sale in order to help you prepare and to prevent fake addresses. Make sure the sale count down hits 0 before you send ETH. If you send ETH before the sale starts on October 3rd 5:00am PDT, your transaction will be rejected. The sale will only take place at https://enjincoin.io/

Step 2: Go to https://www.myetherwallet.com/ Go to the MyEtherWallet website at https://www.myetherwallet.com. Make sure that you access the website via an HTTPS address. If you’re using Chrome, you should see a green lock notification in the address bar:

Step 3: Go to the “Send Ether & Tokens” Tab Choose how you would like to access your wallet. For E.G., if you choose to access using your private key, simply enter your private key in the provided input box and press the “Unlock” button to proceed.

Step 4: Send ETH to the Token Sale Address When sending ETH, you will be asked to fill the “Send Transaction” form.

● In the “To Address” field, paste the token sale address copied from the ENJ home page https://enjincoin.io

● In the “Amount to Send” field, fill in the amount of ETH you wish to use to buy ENJ tokens

● In the “Gas Limit” field, change the minimum amount to 200,000 gas. This will ensure that your transaction is processed.

● Click on “Generate Transaction” then click on the “Send Transaction” button

A popup will appear. MyEtherWallet will ask you to confirm the transaction. If the data is correct and you wish to proceed, click “Yes, I am sure! Make transaction.” DO NOT click on this button more than once.

Congratulations! You have now purchased the amount of ENJ that corresponds to the amount of ETH you sent.

After sending the request, you should get a link to your transaction (powered by the etherscan.io web service)

How Can I See My ENJ?

Follow this guide to access your Enjin Coins: https://medium.com/@enjin/how-to-add-enjin-coin-enj-tokens-to-your-wallet-b80d6e3afed1

Acquiring Ether (ETH) Ether (ETH) will be the only acceptable form of payment in the ENJ token sale. Please make sure that you have adequate ETH available for the token sale. You can purchase ETH with fiat currencies such as USD, Renminbi, etc., on any of the well-known cryptocurrency exchanges, such as:

● Coinbase.com ● Kraken.com ● poloniex.com ● Cex.io

You can also exchange existing cryptocurrencies (BTC, Dash, etc) for ETH using an exchange service such as:

● shapeshift.io ● changelly.com

During the token sale event, please ensure that the amount of ETH you have in your wallet is sufficient to cover your buy-in amount as well as the fee for transacting on the Ethereum blockchain (“gas”). Any attempts to send ETH from an exchange (e.g., Coinbase, Kraken, Poloniex, etc.) during the sale will result in an inability to purchase ENJ and your ETH may be permanently lost.

Frequently Asked Questions For more info, please visit the official: MyEtherWallet's FAQ.

Why can’t I see my balances when I unlock my wallet? This is most likely due to the fact that you are behind a firewall. It is common for the API that is used to display the balance to be blocked by firewalls. You will still be able to send transactions, but you will need to use a blockchain explorer, such as Etherscan, to view your balance.

Why can’t I see the account I have just created in the blockchain explorer (e.g., Etherchain, Etherscan)? Only active accounts are visible in a blockchain explorer. Once you have transferred some ETH into the account, it should be visible.

I am trying to unlock my wallet but it keeps freezing / hanging. Sorry you are having trouble. Decrypting the keystore files is an intensive process and takes longer in Javascript. We recommend:

1. Using Google Chrome. 2. Clicking "Continue" when you see the unresponsive error alert pop up. 3. Closing other intensive programs open (e.g., a lot of browser tabs, video

games, etc.). The combination of the above typically eliminates the problem. If it doesn't, please contact us and include your browser and OS and we can advise from there.

Transaction Failed - "Out of Gas" Each transaction (including token and contract transactions) require gas and that gas is paid in Ether. You can think of this like a transaction fee. The more computational effort a transaction takes, the more gas you need. MyEtherWallet estimates how much gas you will need - but sometimes it doesn't get it right. Solution: Try manually increasing the "Gas Limit". First, try doubling the amount of gas that MyEtherWallet estimates, and sending again. Any excess gas will be returned to you, so you could even triple or quadruple it. More Information About Gas

● A standard TX will be 21000 gas & a gas price of 0.00000002 ETH so the total TX fee will be 0.00042 Ether.

● With tokens, the amount of gas is typically 50000 gas - 100000 gas, so the total TX fee increases to 0.001 ETH - 0.002 ETH.

● The amount of ETH or tokens you are sending does not affect the amount of gas you need.

● GAS LIMIT is the maximum amount of GAS you will send with your transaction. This is in units of GAS.

● GAS PRICE, which you will not see except on the Offline page, is how much each unit of gas costs. We set it at 0.00000002 ETH.

How does MyEtherWallet actually work? Please check this page: https://myetherwallet.groovehq.com/knowledge_base/topics/how-does-myetherwallet-actually-work

Where can I get more help? Reddit: r/EnjinCoin/ Twitter: @enjincs Facebook: https://www.facebook.com/enjinsocial Support https://www.enjin.com/support or https://enjincoin.io/#section-subscribe Telegram: https://t.me/enjin_coin