CRANE SYSTEMS & LIFTING SOLUTIONS
02
For years, KM Kümsan without sacrificing the quality; makes production of electrical chain hoist, electrical wire rope hoists, single and double girder (EOT) cranes, gantry cranes, JIB cranes, monorail cranes, rubber tire girder (RTG) cranes, special design process cranes and any kind of steel construction, as well as import and export of these products. The word-class crane systems produced in KM Kümsan are in line with quality standards and production certificates and are trading with 21 different countries in the world.
Regional distributorship for middle east including Iraq, Iran (in case of the lifting of embargo), Saudi Arabia, Turkish Republics (Azerbaijan, Uzbekistan, Kirgizstan)
The systems we produce have the qualty and manufacturing certificates of the world standards. Furthermo-re, we can perform tests on the lifting equipments up to 160 tons with the special test station in our premises.
KM Kümsan Vinç Sistemleri San. ve Tic. A.Ş. has been established in 1973, aiming to provide our customers with highest quality and and most economical solutions, concerning lifting and material handling and lifting systems. Today, we continue to serve the industry at our 10.000+4.000 sqm site located in Tuzla- İstanbul. The firm began gathering the firms KM Kümsan Crane Systems and Çelikbilek Hoisting and Carrying Systems Inc. Co., providing service in the sector of elevation and carrying machines, under Çelikbilek Group in scope of its corporate structuring project initiated in 2006.
KM Kümsan answers to your special needs and your requirements for your entire crane installation, service, spare parts, periodic maintenance and providing scientific examination and modernization services
KM Kümsan is the founder member of Electrical Crane Manufacturers Association (TEVİD)
1973....1984..............1986........................1990...........................1995.........................1999..........................2002..........................2008.......................
Solution partner for 43 year...
03
Hoist performance rating can be determined by the table taking into consideration the effective loads and daily average operating hours.
Hoist Performance Ratings According To The FEM NormHoist Performance Ratings According To The FEM Norm
x: % of operating time y: % of maximum load
1) 100% ED; 35°C; 3) 140A 80% ED; 4) 200A 80% ED; 5) 160A 80% ED;2) Standart;
1. Light Duty
2. Standard Duty
3. Heavy Duty
4. Very Heavy Duty
Service classification Effective loads
Load may vary no load to occasional full rated loads. This service covers hoists in repair shops, a light fabricating industries, service and mainte-nance work.
Loads and utilization are randomly distributed with capacity loads are frequently handled. This service covers the hoist used in general machine shops, in fabricating and assembly industries.
In this type of service, loads approaching 50% of the rated capacity will be handled condtantly. This service covers hoists in heavy machine shopsi loundries, fabricating paints steel warehouses.
In this type of service requires hoists capable of handling loads approac-hing a rated capacity throughout its life. Application may include bulk handling of material with magnets, buckets or other heavy attachments.
1. Light Duty
2. Standard Duty
3. Heavy Duty
4. Very Heavy Duty
Hoist Class
Service classification Average operating hours/day
M31 Bm
2-4
1-2
0,5-1
0,25-0,5
M41 Am
4-8
2-4
1-2
0,5-1
M52m
8-16
4-8
2-4
1-2
M63m
04
The issues required to be check during the selection of crane:Primarily determine which application type (construction structure) of crane you need. While making this choice, you are required to select the most appropriate crane type to your site.
1. The capacity of crane must definitely be selected as needed according to your growth trend in the medium term.2. The operation duration of the crane is not the working hours of your factory. While determining the operation period, mention in which frequency and in which capacity interval you want to use your crane. The unnecessary high service classification will cause you to pay more money for the crane.3. The Iifting speed of the crane important factors that increase the price. Definitely calculate how much speed you need. Especially in the standard workshop crane, high Iifting speed (6 m/min and more) will cause you to pay more money for the crane.4. The single girder cranes are cheap at first glance, but they have some serious disadvantages when compared to the double girder cranes in some issues. These are loss in the Iifting height and building lateral approaches, difficulty in reaching the crane due to the absence of the platform (for mainte-nance and repair), and implementation limits over a certain capacity.5. While determining your Iifting height need, defini-tely do not forget to consider the dead distance arising from the equipments to which you connect the load such as strap, chain, Iifting clamp. If you have limitations in the building measurements, still the applications that will meet your desire can be realized.6. While selecting the systems for installing electri-city to the crane, definitely evaluated your possibility of installing another crane to the same hall. If there is such a possibility, you will not have to re-install electricity system investment in the future by selec-ting the system capacity higher.
7. Using closed bus bar system will provide you important advantages for situations other than the situations which are compulsory for installing elect-ricity to the crane. These are that the system can be extendable, it is affected from the external environ-ment very less, it has a rigid structure and does not cause flexion problem, it does not have the risks that the open conductors form, it has more stable current receivers and it has less coal abrasion.8. Pay attention that the electricity parts used in your crane are products which can be supplied from the market easily and having international brand. The producer specific parts will cause you to wait for long durations and pay high prices in case of an acci-dent.9. While deciding about your crane, pay attention that the parts are designed in accordance with the world standards (DIN and FEM). While making saving from the investment cost, do not suffer from the operating costs.10. While deciding on your crane, definitely ask the periodical maintenance agreement and extended guarantee period. This will ensure you to benefit from your crane for a long time without problems with a small fee and will decrease your operating costs11. Two stage speeds have become an inevitable obligation in terms of the work security especially in the Iifting and this feature will allow you to realize all crane movements in a controlled way. By this way, it prevents the work accidents and provides you more gain than its price.12. Pay attention that the crane end carriage groups be should direct drive without pinions. The pinion drives will cause periodical pinion change work for you and will increase your operating costs.13. Pay attention that your crane has emergency stop, buzzer, warning light and overload, switch. These devices are very important for your work security and will help the problem-free operation of your premises and will decrease the repairs that will arise due to the faulty usage to the minimum.
05
14. Pay attention that the drive motors engines have brakes. Even though there are not too many prob-lems in the normal usage, the brake is very impor-tant and required for emergency situations.15. Pay attention that the brakes have the manual opening handle. Especially with the help of the manual opening handle manuel realise break in the lifting, you can use it to level your load down safely in case of electricity cut-off or breakdown.16. Pay attention that the electricity motors equipped thermistor protection. In case the engines are over-heated due to a mechanical or electrical reason, it will prevent the burning of the motor and prevent the expensive repairs.17. Pay attention that it has rotory limit switch drive by drum. In this way, both the collusion of the hook to the crane on the upper side and the leveling down of the hook and loosening and mixing of the rope wire on the lower side by the unconsciousness users will be prevented. The limitation made with the rope guide becomes disabled when the guide is broken.18. Pay attention to the operating and maintenance costs. During the purchase of the crane, get informa-tion regarding the spare parts and maintenance costs. That the first investment coast can be cheaper but ineffective besides the operating and maintenan-ce costs that will arise arterwards.19. Pay attention to the crane’s problem-free opera-ting period and life time. As a result, the crane is a machine which is formed of mechanical and electri-cal parts and it can break down. Definitely ask the intervention durations in the breakdown situations and what type of aids are given in such situations. Get the information about lifetime of the components and emergency spare parts (like, wheel bearing, wire rope, brake tining).
20. Ask the calculation criteria and calculation stan-dards of the steel structure. Make sure that the defle-ction rate used especially in the crane bridge is not less than L/1000 for S235 material. Make sure that the appropriate reinforcements support that will ensure that the steel structure will be more stable will be used.21. Make sure that the marking and numbering appropriate to the standards are made in the electri-city panels. Request the electricity panel diagram drawings.22. Check the spare parts and maintenance guide lines. Before making agreement for the crane, defini-tely review the spare parts catalogues, coding system, exploded pictures and maintenance guideli-ne. International certificates and norms required in the crane applications:
International certificates and norms for crane applications
MATERIAL HANDLING AND CRANE SYSTEMS
06
HOIST & CRANE TYPES
B. RADIUS LINEA. STRAIGHT LINE
A. SINGLE PROFILE
A. NORMAL
A. NORMAL
D. HEAVY DUTY E. LOW CEILING
B. RAISED
B. RAISED
C. UNDERSLUNG
C. UNDERSLUNG
B. MULTI PROFILE
MON
ORAI
LKB
SYS
TEM
SING
LE G
IRDE
RDO
UBLE
GIR
DER
07
HOIST & CRANE TYPESJI
B CR
ANE
GANT
RY C
RANE
SPEC
IAL D
ESIG
N
D. BUILDING MAINTENANCE UNIT
A. LEVEL LUFFING
D. SEMIGANTRY
A. NORMAL
C. HEAVY DUTY
A. 270° SLEWING B. 360° SLEWING
D. COLUMN TYPE
B. ONE SIDE CANTILEVER
C. DOUBLE SIDE CANTILEVER
E. TELESCOPICSEMIGANTRY
B. GROUND WINCHES
C. MARINETRAVEL LIFT /
STRADDLE CARRIER
E. AUTO-CLAV CRANE (BLOCK HANDLING)
Overload Switch3
08
Rotary Limit Switch
Hook Block
Brake and Manual Release4
Lifting Motor and Gearbox5
Wire Rope Guide1
2
12
5
1
7
11
4
12
98
6
09
MONORAIL WIRE ROPE HOIST
Limit Switch
Travel Motor
Standard Socket Connection
Electric Control Panel9
8
7
6
Hook10 Cable Spiral and Tray11
10
MONORAIL WIRE ROPE HOIST
5 TON MONORAIL WIRE ROPE HOIST
10 TON MONORAIL WIRE ROPE HOIST
10 TON MONORAIL WIRE ROPE HOIST
10 TON MONORAIL WIRE ROPE HOIST
11
MONORAIL WIRE ROPE HOIST
12
MONORAIL WIRE ROPE HOIST
according to DIN5480 which enables higher safety during load handling, compared to key type output shafts.
Electric Monorail Wire Rope Hoist
* Please ask for different load capacities and FEM classes.
** Please ask for different speed alternatives.
*** Standard travelling speed are 5/20 m/min. Please ask for different speed alternatives.
KC 1
KC 2
KC 3
Ø 8
Ø 10
Ø 14
Ø 100
Ø 125
Ø 140
2,5 / 0,37
4,9 / 0,8
9,5 / 1,5
4 / 0,66
4 / 0,66
4 / 0,66
8 / 1,3
8 / 1,3
8 / 1,3
0,37
0,55
0,75
2,5
5
10
1,25
2,5
5
3,2
6,3
12,5
1,6
3,2
6,3
Model
L1
L2
L3
L4
L1
L2
L3
L4
L1
L2
L3
L4
SizeLifting height
(m)
5
8
12
16
5
8
12
16
5
8
12
16
4/1
10
16
24
32
10
16
24
32
11
24
36
48
2/1 4/1 2/1 4/1 2/14/1
2m 1Am
2/1
Ropediameter
(mm)
Wheeldiameter
(mm)
Liftingmotor(kW)
Travellingmotor(kW)
Lifting speed(m/min)
Lifting capacity(ton)
20 / 5
20 / 5
20 / 5
Travellingspeed
(m/min)
13
KC SERIES MONORAIL WIRE ROPE HOIST
KC 1
KC 2
KC 3
Model
L1L2L3L4L1L2L3L4L1L2L3L4
Size Weight (kg)
750
520
670
C(mm)
670
755
850
D(mm)
191
190
256
E(mm)
790
935
1200
F(mm)
168
185
200
I(mm)
A(mm)
112213821732208212791534190922791221149117792771
B(mm)
786104613961746909116415391909821109113792371
G (mm) H (mm)
2/1775101513651715917116915531913731100312751547
4/17349941344169486611181502186268695812301529
335375410470510555620680
1000102011251220
2/1244374550720288514606396200336472624
4/1122187275362144207303393100168236312
14
Wire Rope Guide
Hook and Hook Block
Travel Motor
4
Brake and Manual Release3
3
2 2
1
15
KC SERIES DOUBLE GIRDER WIRE ROPE HOIST
Electric Control Panel
Cable Spiral and Tray
Lifting Motor and Gearbox
Buffer9
8
Overload Switch5
6
7
8
9
7
6
16
KC SERIES DOUBLE GIRDER WIRE ROPE HOIST
according to DIN5480 which enables higher safety during load handling, compared to key type output shafts.
* Please ask for different load capacities and FEM classes.
** Please ask for different speed alternatives.
*** Standard travelling speed are 5/20 m/min. Please ask for different speed alternatives.
Electric Double Girder Wire Rope Hoist
KC 2
KC 3
KC 4
KC 5
KC 6
Ø 10
Ø 14
Ø 18
Ø 20
Ø 26
Ø 160
Ø 160
Ø 250
Ø 250
Ø 315
4,9 / 0,8
9,5 / 1,5
12,5 / 2
16 / 2,6
38
20/ 5
20/ 5
20/ 5
20/ 5
20/ 5
0,55
2 x 0,37
0,75
1,5
2 x 0,75
1,5
2 x 0,75
2,2
2 x 1,1
L1
L2
L3
L4
L1
L2
L3
L4
L1
L2
L3
L4
L1
L2
L3
L4
L1
L2
Model SizeLifting height
(m)
1250
1400
1800
2000
1250
1250
1600
1800
1600
1800
2240
2800
1600
1800
2400
2800
2000
2700
...
5
8
10
...
5
8
10
5
8
12
16
5
7
10
14
8
14
6/1
5
8
12
16
5
8
12
16
8
12
18
24
8
11
16
22
12
20
4/1
10
16
24
32
10
16
24
32
16
24
36
48
16
22
32
44
24
40
2/1
2m 1Am
Ropedia.
(mm)
Wheeldia.
(mm)
Trackgauge(mm)
Liftingmotor(kW)
Travellingmotor(kW)
Travellingspeed
(m/min)
Lifting speed(m/min)
Lifting capacity(ton)
2,6 /
0,44
2,6 /
0,44
2,6 /
0,44
2,2 /
0,35
3,2 /
0,5
6/1
4 /
0,66
4 /
0,66
4 /
0,66
3,4 /
0,53
4,9 /
0,82
4/1
8 /
1,3
8 /
1,3
8 /
1,3
6,7 /
1,03
10 /
1,6
2/1
-
15
30
37
63
6/1
6,3
12,5
20
25
40
4/1
3,2
6,3
10
12,5
20
2/1
-
15
25
30
50
6/1
5
10
16
20
32
4/1
2,5
5
8
10
16
2/1
17
KC SERIES DOUBLE GIRDER WIRE ROPE HOIST
KC 2
KC 3
KC 4
KC 5
KC 6
Model
L1L2L3L4L1L2L3L4L1L2L3L4L1L2L3L4L1L2
SizeC (mm)
656
790
695
960
1050
2/1
656
790
695
960
1250
4/1
750
850
1000
1175
1250
6/1
D (mm) E (mm)
1250
1450
2080
2080
2400
F(mm)
1686
1886
2576
2576
3040
G(mm)
375
375
375
375
550
H(mm)
124
124
160
160
160
I(mm)
218
218
248
248
320
J(mm)
65
65
80
80
90
K (max)(mm)
55
55
70
70
80
R (max)(mm)
A(mm)
125014001800200012501400160018001600180022402800160018002400280020002700
564
700
1100
1400
1452
B(mm)
Weight(kg)
845102012451735830995125015601190152520502500124014822054240013852140
78096111821672695860112414341084142419452420112013621934228014502200
78195011501650725890116014701100145019502430110013001900220013852140
2944206127922053454806303705408001040380500790970570945
147210306396100170240315245270400520190250395485285472
9814020427868115160210120180265345128165265320190315
6808008459009551000105011001815186519502050198020502375253025503000
2/1 4/1 6/1 2/1 4/1 6/1
18
SINGLE GIRDER E.O.T CRANES
End Carriages
Buffer
Warning Horns & Lamps
Electric Control Panel
1
1
4
4
2
3
3
2
19
SINGLE GIRDER E.O.T CRANES
Electric Monorail Wire Rope Hoist
Crane Feston System
End clamp Flat cable
Pendant control unit trolley
Towing arm
Towing trolleyCable trolley
5
6
Pendant Control Box6
7
7
5
20
SINGLE GIRDER E.O.T CRANES
A. NORMAL B. RAISED C. UNDERSLUNG
10 TON SINGLE GIRDER E.O.T CRANES
21
SINGLE GIRDER E.O.T CRANES
16 TON SINGLE GIRDER E.O.T CRANES
8 TON SINGLE GIRDER E.O.T CRANES
Warning Horns & Lamps
22
Double Girder Wire Rope Hoist
End Carriage
1
2
3
Buffer3
4
4
82
10
10
Walkway
Crane Feston System
End clamp Flat cable
Pendant control unit trolley
Towing arm
Towing trolleyCable trolley
23
DOUBLE GIRDER E.O.T CRANES
PendantControl Box
Bridge Electric Control Panel
5
Hoist Electrical Box
5
7
7
8
9
Travel Motor
9
1
6
6
24
DOUBLE GIRDER E.O.T CRANES
A. NORMAL B. RAISED C. UNDERSLUNG
D. HEAVY DUTY E. LOWERED
110/20 TON DOUBLE GIRDER E.O.T CRANE
25
DOUBLE GIRDER E.O.T CRANES
110/20 TON DOUBLE GIRDER E.O.T CRANE
85 TON DOUBLE GIRDER E.O.T CRANE
26
DOUBLE GIRDER E.O.T CRANES
70 TON DOUBLE GIRDER E.O.T CRANE
60/10 TON DOUBLE GIRDER E.O.T CRANE
27
DOUBLE GIRDER E.O.T CRANES
60/5 TON DOUBLE GIRDER E.O.T CRANE
50/10 TON DOUBLE GIRDER E.O.T CRANE
28
DOUBLE GIRDER E.O.T CRANES
30/5 TON DOUBLE GIRDER E.O.T CRANE
25 TON DOUBLE GIRDER E.O.T CRANE
29
DOUBLE GIRDER E.O.T CRANES
15/5 TON DOUBLE GIRDER E.O.T CRANE
15 TON DOUBLE GIRDER E.O.T CRANE
30
Crane Feston System
End clamp Flat cable
Ideal control unit trolley
Towing arm
Towing trolleyCable trolley
1
Double Girder Wire Rope Hoist1
2
Hook and Hook Block
23
Motorized Cable Reel
3
Gantry Wheel LockingMechanism4
8
9
9
Runway Rail
31
GANTRY CRANE
4
6
Walkway
6 Travel Motor
7
7
Bogie End Carriages
5
8
32
GANTRY CRANE
A. NORMAL B. ONE SIDE CANTILEVER
C. DOUBLE SIDE CANTILEVER
D. SEMIGANTRY E. TELESKOPIC SEMIGANTRY
60 TON GANTRY CRANE
33
GANTRY CRANE
60 TON GANTRY CRANE
60 TON GANTRY CRANE
34
GANTRY CRANE
50/10 TON GANTRY CRANE
50/10 TON GANTRY CRANE
35
GANTRY CRANE
25 TON GANTRY CRANE
25 TON GANTRY CRANE
36
GANTRY CRANE
25/5 TON GANTRY CRANE
50/10 TON GANTRY CRANE
37
GANTRY CRANE
10 TON GANTRY CRANE
2x20/3.2 TON GANTRY CRANE
38
Jib Column
Jib Arm Slewing Mechanism
Jib Slewing Reduced Motor
Pillar Jib Cranes
1
2
Electric Monorail Wire Rope Hoist
4
4
6
5
2
3
3
Wall-mounted Jib Cranes
39
JIB CRANES
Electric Chain Hoist
5
Electric Control Panel6
Crane Feston System
End clamp Flat cable
Ideal control unit trolley
Towing arm
Towing trolleyCable trolley
1
1
JIB CRANES
40
A. 270° SLEWING B. 360° SLEWING
C. HEAVY DUTY D. COLUMN TYPE 180°
2 TON JIB CRANE
41
JIB CRANES
3.2 TON JIB CRANE
2 TON JIB CRANE
42
JIB CRANES
500 KG JIB CRANE
2 TON JIB CRANE
43
JIB CRANES
2.5 TON JIB CRANE 1 TON JIB CRANE
5 TON JIB CRANE 500 KG JIB CRANE
Double Girder Wire Rope Hoist1
Electric Control Cabin
5
44
2
PROCESS CRANES
Crane Feston System
End clamp Flat cable
Ideal control unit trolley
Towing arm
Towing trolleyCable trolley
5
Electric Control Panel
4
6
1
2
6
43
Low Speed Disk Brake3
45
Rope Drum & Gearmotor
46
PROCESS CRANES
80/80 TON DOUBLE GIRDER LADLE CRANE
80/80 TON DOUBLE GIRDER LADLE CRANE
47
PROCESS CRANES
80/80 TON DOUBLE GIRDER LADLE CRANE
80/80 TON DOUBLE GIRDER LADLE CRANE
48
PROCESS CRANES
10 TON SLAG HANDLING GANTRY CRANE
10 TON SLAG HANDLING GANTRY CRANE
49
PROCESS CRANES
45 TON COIL HANDLING DOUBLE GIRDER EOT CRANE
20 TON COIL HANDLING DOUBLE GIRDER EOT CRANE
50
A. LEVEL LUFFING
B. GROUND WINCHES
D. BUILDINGMAINTENANCE UNIT
E. AUTO-CLAV CRANE(BLOCK HANDLING)
C. MARINE TRAVELLIFT/STRADDLE
CARRIER
51
GROUND WINCHES
Ground Winches
80 TON RADIAL GATE WINCH
80 Ton Radial Gate Winch
Ground Winches
52
GROUND WINCHES
110 (55+55) TON RADIAL GATE WINCH
110 (55+55) Ton Radial Gate Winch
53
JIB CRANES
110 (55+55) TON RADIAL GATE WINCH
110 (55+55) TON RADIAL GATE WINCH
54
PROCESS CRANES
70 TON LOCOMOTIVE TRANSFER CAR
70 TON LOCOMOTIVE TRANSFER CAR
55
PROCESS CRANES
70 TON LOCOMOTIVE TRANSFER CAR
10 TON TRANSFER CAR
Auto-clav Crane
Teleskopic Semi Gantry Crane
SPECIAL PROJECT CRANES
56
57
Lifting Beam Mash Rippers
Coil Tong C Hooks
58
LIFTING SOLUTIONS
Magnet Spreader Beams
Rotating Magnets
59
Concrete Tong
Grabs
60
Lifting Motor & Gearbox Travelling Motor & Gearbox Hook
Hook Block Drum End Carriages
61
Wire Rope Guide Buffers Boogie End Carriages
Electro-Hydraulic Brake(Thrustor)
Automatic Lubrication System Gantry Wheel Locking Mechanism
° ~
Electric Control Panel Anti-Collision Sensor Warning Lamp
° ~
Warning Horn Limit Switch Socket Plug
62
Rotary limit switches will allow you to set the lowest and the highest position of the hook. lts mounted the small period applications like drum and shaft. Then you can limit between two points or multipoint with entering the set values. The flange connection is can be made make and female, or the limiting can be used on pinion gear reducer and drums. In optional the potentiometer and encoder includeds can be used
Our festoon-systems carry flat and round cables for the transfer of electrical energy and data for the crane systems. Hoses are also carried for the directing of fluids, air or gases. The cable trolleys can be manufactured from plastic and also steel with a roller bearing.
Specialy designed rolled form of galvanized profiles used to carry festoon system trolleys.
Rotary Limit Switch Cable Trolleys Festoon Systems
Crane Lighting Systems are used in indoor and outdoor applications to have clear visual for the working area. Range from 100 to 1000 W.
Multipole and enclosed conductor rails contain several poles in one or several compact box type plastic housing. They are used for energy and data supply on straight and curved track configurati-ons. For indoor and outdoor applicati-ons.
Slip ring bocties are used as power and data transfer systems for all types of rotating machines, e.g. Revelving cranes with any number of poles Current ratings up to 1200 A and voltages up to 24 kV are possible. The range in size for the slip ring bodies starts with 30 mm up to 360 mm diameter and lined up to 100-poles. High impact plastic or galvanised steel housing to IP65 protection grade
Crane Lighting System Conductor Rails Slip Ring Bodies
63
CRANE COMPONENTS
End clamp Flat cable
Ideal control unit trolley
Towing arm
Towing trolleyCable trolley
64
CRANE COMPONENTS
Motorized cable reels are usually used in open area gantry crane systems winding the cable to the drum by using motor&gearbox. Because of having torque motors, it avoid the cable to loose.
Through the spring mechanism over, it can do the same duty that motorized cable reels does. lt has price advantage. Because of not having motor&gearbox in their body.
The ideal control that works freelance with the crane movements protects the operator when the load is lifting, lowering and travelling.
Motorized Cable Reels Spring Cable Reels Ideal Control
lts a system that has the same duty likeuHrasonic and radio frequence contro-led remote control without any cable connection which gives the oppurtunity to the operafor to move freelance
This device has emergency stop button and the other needed buttons to control the crane's lifting and travelling movements.
An electronic device which able you to measure the operating datas and times for the cranes. This datas will help to operate the cranes more safely and for to apply better service.
Radio Remote Control Pendant Unit Black Box
65
CRANE COMPONENTS
Produced os A or S type train rail with mushroom head with special strength steel according to DIN 536. At the same Hme the railthat are produced as rectangler shaped, cold beared materi-als called St 52-3.The flexiability of Rail Pad allows more sofer working place by deploylng the weights on the rails to the ground and absorving the vibration and sound. Rail clips are the materials that are used to connect the rails to the ground.
Ac inverter drive used to supply asynchronous motors. The drive can operate in closed loop flux vecfor control mode or according to U/F control with its calculalion power. The drive separately controls the magneti-sing current and the active current of a standard asynchronous motor. The rotor speed and position are calculated to control the motor torque and speed. This operating mode is used, in closed loop, to obtain very high performance levels and is thus suitable for the majority of applicatlons.
The crane scales are useable in every crane-user company. lts safe, fast scaling opportunity easy readable 5 digit LCD panel. IP 55 protection class. Can be used between -20°C ~ +60°C. On/Off control.
Raii,Rail Pad and Rail Clips Frequency Inverter Crane Weighing System
Operator control cabins able you to wide field of vision controlled by joystick and button controls and vibration absorption systems seats. Due to needs it can be equipped with aircondition system PLC application and other accessories.
With 5 digits LCD panel. 130 mm. Can be used between -20°C ~ +60°C. On-Off control. IP55 protection class. Can show erasing and weighing calculation.
Overload limiters block the system in cases when the load limit antlclpated for cranes in EU regulations are exceeded and thus profeel the system from overload
Operator Control Cabin Crane Weighing Display Load Limiter Switch
66
"After Sa/es and Crane Commissioning Services" has been establis-hed in order to erea, maintain and repair Crane Systems manufactu-red by K-M Kümsan Crane Systems, all over Turkey and abroad. Additionally, companies who hold any kind of lifting and material handling equipment can make use of our full service. We serve 7124 to our customers which are assigned to a periodic maintenance contract
Modernisation services (frequency-controlled lifting and travelling systems,remote controls,overload protection devices,digital weight displays,speciallifting and handling attachments, PLC applications, anti-crash sensors, change ofweared rails...etc)
Energy line assembling, canvertion into closed-type conduc tor rails (strongly recommended in terms of safety)
3 seperate ServiceTeams (consisting ofmechanics and electridans) serving 7 days / 24 hours
2 seperate Erection Teams, for mounting / dismounting Crane systems, transportation of Crane systems
2 seperate Maintenance Teams, responsible for periodical maintenance (according to the related Laws in Turkey: on quarterly basis per year)
Start-up of Crane SystemsSupervisor servicesTrainings and providing of documentation for Operators
(User manual, maintenance manual...etc)Spare Parts list and (on request) recommendments for any
type of Crane systemsSafety components (slings, hook safety latches, overload
limit switches, audio-visual warning devices, black-box... etc)Full-shift periodical maintenance team for Crane systems
which are erected in critical Sites (on request)
Here are some main figures and Information about:
67
CRANE COMPONENTS
SINGLE GIRDER EOT CRANE REQUEST FORMSINGLE GIRDER EOT CRANE REQUEST FORM
68
GENERAL FEATURES
WORKING AREAOUTDOORINDOOR
ANOTHER CRANE IN THE SAME HALL Q (CAPACITY)S (SPAN)H (LIFTING HEIGHT)ABCLL1D
TONmmmmmmmmmmmmmmmm
YESNO QTY
SIZE CHART
COLUMNSYESNO
CRANE CONTROLPUSH BUTTON
CRANE CONTROLYESCONCRETESTEELCONTINIUOUS CONCRETE
NO
RADIO
GUSSET
EXPLANATIONS: ...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................
YESNO
UNDERSLUNG
RAISEDNORMAL
69
DOUBLE GIRDER EOT CRANE REQUEST FORMDOUBLE GIRDER EOT CRANE REQUEST FORM
UNDERSLUNG LOWERED
NORMAL
GENERAL FEATURESANOTHER CRANE IN THE SAME HALL Q (CAPACITY)
S (SPAN)H (LIFTING HEIGHT)ABCLL1D
TONmmmmmmmmmmmmmmmm
YESNO QTY
SIZE CHART
WORKING AREAOUTDOORINDOORCOLUMNSYESNO
CRANE CONTROLPUSH BUTTON
CRANE CONTROLYESCONCRETESTEELCONTINIUOUS CONCRETE
NO
RADIO
GUSSET
EXPLANATIONS: ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................
YESNO
RAISED
70
GANTRY CRANE REQUEST FORMGANTRY CRANE REQUEST FORM
NORMAL
DOUBLE SIDE CANTILEVER
* Height H2 is only requested for shaft cranes
SINGLE SIDE CANTILEVER
SEMIGANTRY
SIZE CHART
Q (CAPACITY)
S (SPAN)
H1 (LIFTING HEIGHT)
H2* (LIFTING HEIGHT)
TON
mm
mm
mm
ENERGY TRANSFER
S1 (CANTILEVER)
S2 (CANTILEVER)
L (LONG TRAVEL)
mm
mm
mm
CABLE REEL
FESTOON SYSTEM
RADIO CONTROL
CABIN YES NO
MOVINGFIXEDEXPLANATIONS: ..................................................................................................................................................................................................................................................................................
71
PILLAR MOUNTED WALL MOUNTED
MANUEL(Max. 270°)
MANUEL(Max. 180°)
DRIVEN(Max. 360°)
JIB CRANE REQUEST FORMJIB CRANE REQUEST FORM
JIB SLEWINGMANUALELECTRIC
JIB MOVEMENTMANUALELECTRIC
SIZE CHART
Q (CAPACITY)
S (JIB LENGTH)
H1 (HEIGHT)
TON
mm
mm
ENERGY TRANSFER
H2 (MAX. HEIGHT)
(SLEWING ANGLE)
mm
°
EXPLANATIONS: ..................................................................................................................................................................................................................................................................................
Tel: +90 216 593 04 00 - Fax: +90 216 593 13 28www.kumsan.com.tr - www.celikbilekmak.com.tr KM
S-20
16-0
6-TR