CRAWLERCRANE collection - Top Mech – Your …Cranes.pdf · SANY CRAWLER CRANE. Performance Data...

C R AW L E Rcollection

CRANE

P2

P6

P14

P10

P18

P22

P26

P30

SCC500E

SCC1000C

SCC2500C

SCC1500D

SCC4000E

SCC6500E

SCC8200

SCC10000

P4

P12

P20

P24

P28

P32

P8

P16

SCC800C

SCC1800

SCC5000WE

SCC8100

SCC8300

SCC16000

SCC1500C

SCC3000WE

SANY CRAWLER CRANE

Performance Data

SCC500E

MAIN PERFORMANCE DATA OF SCC500E CRAWLER CRANE

Performance index Unit Data

Boom operating condition

Max. rated lifting capacity t 50

Boom length m 13~52

Boom luffing angle ° 30~78

Max. rated lifting moment t·m 50×3.7

Operating Condition of Fixed Jib

Max. length boom + Max. length jib m 43+15.25

Angle between fixed boom and jib ° 10、30

Working speed

Rope speed of main and auxiliary winches m/min 0~63/0~102

Rope speed of luffing winch m/min 0~73

Slewing speed rpm 0~3.2/0~1.6

Travel Speed km/h 0~1.39

Engine Output power/rated speed kW/rpm 127/2000 or (125/2100)

Transportation parameter

Maximum transport weight of single piece t 30

Transportation size (length x width x height) mm 7110×3300×3260

Other parameters Average ground pressure MPa 0.061

SCC500E

● Safety control system

Two convenient and reliable modes of operation working and installation with real-time level display, anti-lightning protection, automatically walk switches, CCTV monitoring function, complete safety and supervision system.

● Excellent operating performance

Advanced load-sensing, limit load regulation and electro-hydraulic proportional micro-speed control make each micro-movement extremely good and operation more stable.

● Reliable function assurance

Key components use famous international brands;Operate stably in harsh environments such as cold, high temperature, altitude and sandy conditions

● Optimized transportation programs

With the function of crawler frame telescopic function, the max. transportation width of the whole machine is 3.36m.

● Flexible configuration combination

Free hook is optional.

● Two counterweight configurations

Improve the lifting capacity of medium and long boom.

● Convenient maintenance technology

● Powerful lifting capacity

● Large-chassis design

SANY CRAWLER CRANE

3

Performance Data

SCC800C

SCC800C








Key components use famous international brands;Operate stably in harsh environments such as cold, high temperature, altitude and sandy conditions.



● Flexible configuration combination

Free hook is optional;The main and auxiliary winches may have free-dropping function simultaneously; caterpillar crawler of excavator may be optionally used for crawler traveling.

● Two counterweight configurations

Improve the lifting capacity of medium and long boom.


● Reliable transmission system

The hydraulic technology of world-renowned brand ensures high system stability and reliability.

● Powerful lifting capacity and

operation efficiency

MAIN PERFORMANCE DATA OF SCC550C CRAWLER CRANE




Length of boom m 13~58


Max. lifting torque t.m 344


Fully extended boom + fully extended jib m 49+18

Included angle between boom and jib ° 15，30

Working speed

Rope speed of main and auxiliary winch (third tier) m/min 0~110

Rope speed of luffing winch (fifth tier) m/min 0~73

Slewing speed rpm 0~2.25

Travel Speed km/h 0~2.0

Gradeability % 30

Engine Output power/rated speed kW/rpm 183/2000


Maximum transport weight of single piece (with crawler) t 50


Other parameters Average ground pressure (basic boom) MPa 0.076


● More optional configurations

Additional functions include free dropping, excavator type crawler, fuel pre-heating, and high pressure alarm, etc.

SANY CRAWLER CRANE

5

Performance Data

SCC1000C

SCC1000C









● Broad adaptability：

Meet certification requirements of CE, North America, Australia, Russia and Taiwan; Engine emission standard: European and U.S. Non-highway Stage 3;With air pre-filter and fuel pre-filter.

● Efficient self-assembly/disassembly

technology







Boom luffing angle ° 30~ 80

Max. rated lifting moment t·m 556.5


Fully extended boom + fully extended jib m 60＋25/63+19

Included angle between boom and jib ° 15、30

Working speed

Rope speed of main and auxiliary winch (third tier) m/min 0~110

Rope speed of luffing winch (fifth tier) m/min 0~73


Travel Speed km/h 1.0/0.68

Gradeability % 30

Engine Output power/rated speed kW/rpm 183 / 2000

Transportation parameter Maximum transport weight of single piece t 43.5


Other parameters Average ground pressure (basic boom) MPa 0.085




● More optional configurations

Additional functions include free dropping, excavator type crawler, fuel pre-heating, and high pressure alarm, etc.

SANY CRAWLER CRANE

7

Performance Data

SCC1500C

SCC1500C









● Broad adaptability



technology








Maximum lifting capacity t 150

Boom length m 18~81

Boom luffing angle ° 30~ 80

Fixed jib operating condition

Max. length boom + Max. length jib m （69＋31）/（75+13）

Angle between fixed boom and jib ° 15，30

Speed parameters

Rope speed of main and auxiliary winches m/min 0~125

Rope speed of Luffing winch(outermost) m/min （0~24）×2

Slewing speed rpm 0~2

Traveling speed km/h 0~1.2/0~0.6(two speeds)

Gradeability % 30

Engine Output power/rated rotational speed kW/rpm 242 /2100


Maximum transport weight of single unit t 50.2

Transportation dimension (length*width*height) mm 10230×3470×3500


SANY CRAWLER CRANE

9

Performance Data

SCC1500D

SCC1500D










Meet certification requirements of CE, North America, Australia, Russia and Taiwan; Engine emission standard: European and U.S. Non-highway Stage 3;With air pre-filter and fuel pre-filter;


technology




MAIN PERFORMANCE DATA OF SCC1500D CRAWLER CRANE


Boom Operating Condition


Max. rated lifting moment t·m 112.5t×8

Length of Boom m 18~81

Boom Luffing Angle ° 30～80

Fixed jib Operating Condition

Fully extended boom+fully extended fixed jib m （69＋31）/（75+13）

Jib offset angle ° 15，30

Speed parameter

Rope speed of main (auxiliary) winch (at outermost working layer)

m/min 0～125

Rope speed of main luffing winch (at outermost working layer)

m/min （0～24）×2

Slewing speed rpm 0～2

Traveling speed km/h 0～1.2/0～0.6

Gradeability % 30

Engine Output power/rated speed kW/ rpm 242 /2100


Maximum transport weight of single part piece t 42

Transportation dimension (length x width x height) mm 10130×3000×3200

Other parameters Average ground bearing pressure MPa 0.09


● 100% load travel

● Two-stage filter of engine

● Fuel heater (optional)

Satisfy low temperature ignition in extremely cold areas

● Automatic traveling direction

travel forward through automatic adjustment after slewing 180º.

● Detection switch for on/off state of

butterfly valve

SANY CRAWLER CRANE

11

Performance Data

SCC1800

SCC1800










Meet certification requirements of CE, North America, Australia, Russia and Taiwan;

MAIN PERFORMANCE DATA OF SCC1800 CRAWLER CRANE

Performance index Unit Parameter

Boom H operating conditions


Boom length m 16~85


Fixed jib FJ operating conditions

Fully extended boom + fully extended fixed jib m 70+31


Luffing jib LJ operating conditions

Max. rated lifting moment t·m 48.7×14

Fully extended boom + fully extended luffing jib m 53+52


Jib luffing angle ° 15~75

Speed parameters

Rope speed of main (auxiliary) winch (outermost working layer)

m/min 0~125

Rope speed of main luffing winch (outermost working layer)

m/min （0~24）×2

Rope speed of auxiliary luffing winch (outermost working layer)

m/min 0~24

Swing speed rpm 0~2

Travel Speed km/h 0~1.2/0~0.6 (two speeds)

Gradeability % 30

Engine Output power/rated speed kW/rpm 242 /2100

Transportation parameters


Transport dimensions (length X width X height)

mm 10130×3000×3200


Engine emission standard: European and U.S. Non-highway Stage 3;With air pre-filter and fuel pre-filter.


technology







● Fuel heater (optional)

Satisfy low temperature ignition in extremely cold areas.

● Automatic traveling direction

travel forward through automatic adjustment after slewing 180º.

● Detection switch for on/off state of

butterfly valve

SANY CRAWLER CRANE

13

Performance Data

SCC2500C

SCC2500C



● New Design of Hoisting Operating

Condition

Special for shield machines in metro construction and similar products.





● Broad adaptability



technology







Performance index Unit Parameter

Boom operatingcondition

Max. lifting capacity t 260

Max. rated lifting moment t·m 1442

Length of boom m 16.5~91.5



Fully extended boom + fully extended fixed jib m 76.5＋31


Operating condition of heavy-duty fixed jib

Boom + Jib m (37.5~76.5) +7

Boom + jib (applicable to construction of metro shield) 19.5+7

Included angle between boom and jib ° 30

Operating condition of luffing jib

Max. lifting capacity t 71.4

Fully extended boom + fully extended luffing jib m 61.5＋61


Speed parameters

Rope speed of main (auxiliary) winch (outermost working layer)

m/min 0~143

Rope speed of main luffing winch (outermost working layer)

m/min (0~31) ×2

Rope speed of auxiliary luffing winch (outermost working layer)

m/min 0~34

Slewing speed rpm0~1.8

0~1.2

Travel Speed km/h 0~1.04/0~0.51 (two speeds)

Gradeability % 30

Engine

whole machine weight(with basic boom and 250t hook) t 240

Output power kW 242

Rated speed rpm 2100

Transportation parameters

maximum transport weight of single piece (including main/auxiliary hoisting winch)

t 59

Transport dimensions (length X width X height) mm 13700×3400×3400


SANY CRAWLER CRANE

15

Performance Data

SCC3000WE

SCC3000WE







● Multi-functional hoisting equipment

for wind power

Particularly suitable for the installation of the wind turbine generator systems of 1.5MW or below.

● Full boom traveling and climbing

functions

● Innovative removable counterweight

● Advanced machine stability control

● Telescopic crawler frame

MAIN PERFORMANCE DATA OF SCC3000WE CRAWLER CRANE



Max. rated lifting moment t·m 1497.6

Basic boom length m 20

Max. length of boom under the standard short jib operating condition

m 86+7 (Center of lifting hook 91m)


Offset angle of fixed jib ° 30

Lifting and falling rope speed of main and auxiliary winch

m/min 0~128

rpm 0~1.19

Slewing speed (with 20m boom) km/h 0~1.02

Traveling Speed % 30

Max. gradeability kW/rpm 298/2100

Output power/rated speed of engine t 273 (all boom, 80t hook)

Overall weight t 80+24

Counterweight MPa 0.15(basic boom, no load)

Average ground pressure



SANY CRAWLER CRANE

17

Performance Data

SCC4000E

SCC4000E












technology


Performance Index Unit Data


Maximum rated capacity t 400

Maximum rated load moment t·m 2090

Boom length m 24~84


HD(B) Operating Condition of Boom with Superlift


Max. lifting torque t·m 5220

Boom length m 30~117

Superlift mast length m 30


LJ Operating Condition of Luffing Jib


Boom length m 36~54

Jib length m 27~63

Fully extended boom + fully extended luffing jib m 54＋63

Boom luffing angle ° 67~87 (stepless)


LJD(B) Operating Condition of Luffing Jib with Superlift


Boom length m 36~84

Jib length m 27(33)~87

Fully extended boom + fully extended luffing jib m 84+87

Superlift mast length m 30

Boom luffing angle ° 67~87 (stepless)


FJ Operating Condition of Fixed Jib


Arm support length m 87+9

Speed data

Rope speed of main (auxiliary) winch m/min 0~140

Rope speed of main luffing m/min 0~56×2

Rope speed of auxiliary luffing m/min 0~101

Rope speed of superlift luffing m/min 0~111


Travel Speed km/h 0~1.2/0~0.4 (two gearshifts)

Engine Output power Kw 400/2000r

Weight

Crane weight (basic arm) t 330

Rear counterweight + central counterweight + superlift counterweight t 135(155)+40+250


Average ground pressure (basic boom) MPa 0.173

● Flexible configuration combination of

operating condition:







Note: The wire rope speed of main/auxiliary winch, main/auxiliary luffing winch, superlift winch refer to the speed at the outermost layer.

SANY CRAWLER CRANE

19

Performance Data

SCC5000WE

● Multi-functional hoisting

equipment for wind power

Suitable for installing 2.5MW wind turbine generator or below.


The maximum lifting capacity under boom operating condition is 500t/6.3m; The longest boom length can be up to 108m.


● Advanced gravity control technology

● Optimized chassis design

The orbital transfer chassis is adopted, with optional track gauge of 5.4 ~ 8.2m; the track four-wheel drive is used, with board width of 1400mm and powerful traction.

● Traveling faster

The traveling speed is 1.5km / h; and the normally closed hydraulic motor reducer and balance valve are both imported from Germany.

● Movable counterweight and front

outrigger technology

● High-strength fine imported steel

pipe

● Double-winch synchronization lifting

with high efficiency

● Good cold start performance

The diesel tank with larger volume and diesel heating pump and fuel heating device.

● Adopted the full electrically closed

hydraulic system

● Adopted the SYMC electronic control

system with proprietary right

● Adopted GPS data remote monitoring

system

● The system fault alarm cycle storage

can be achieved for fault record, with

the amount of not less than 1000.

● Meeting Tier II emission standard, cab

ear noise of 85dB and environmental

noise of 110dB.

SCC5000WE

MAIN PERFORMANCE DATA OF SCC5000WE CRAWLER CRANE

Performance Index Unit Parameters

Boom operating condition (H)

Max. rated hoisting capacity t 500/6.3m【Basic boom of 24m】

Max. hoisting moment t·m 425×8=3400



Boom + Fixed jib operating condition (FJ)


Fixed jib length m 12~36

Fixed jib compensation angle ° 10, 20

Extension jib operating condition (***C) Extension jib length m 1.8

Boom + Luffing jib operating condition (LJ)

Boom length M 30~72

Luffing jib length m 24~72

Boom luffing angle ° 67, 77, 87

Luffing jib luffing angle ° 15~77

Type of lifting hook Tonnage of lifting hook t 18, 50, 100, 150, 250, 500

Speed data

Main hoisting I wire speed m/min 0~140

Boom luffing rope speed m/min 2×(0~90)

Jib luffing (main hoisting II) rope speed m/min 0~140

Auxiliary hoisting wire speed m/min 0~110

Rotary speed rpm 0~1.5

Traveling speed km/h 0~1.5

Gradient capability % 30

Engine parameters

Engine manufacturer / Model Deutz/BF8M1015C

Output power / speed kW/rpm 400 /2000

Max. output torque N.m/rpm 2630 /1200

Emission standard U.S. EPA Tier II and EU Stage II

Weight Overall weight t

Approx. 420 t(160t of movable counterweight; 40t of central counterweight; 24m of basic boom and 50t of lifting hook)

Transport weight of single part Max. transport weight of single part t

43.5t (with disengaging device for chassis and superstructure)65.0t (without disengaging device for chassis and superstructure)

Transport dimension Transport dimension of carbody mm 9860×3380×3470

Ground pressure Average ground pressure MPa 0.18

SANY CRAWLER CRANE

21

Performance Data

SCC6500E

SCC6500E



● Hoisting condition aiming at wind

power

Particularly suitable for the installation of the wind turbine generator systems of 3.0MW or below; the fixed short jib has the optimum angle and radius designed in the hoisting scheme of large fans.







technology





● Luffing super-lift counterweight：

● Proprietary electric control software

● Centralized lubrication



Max. rated lifting capacity (t) t 650 (6m working radius)

Max. rated lifting capacity (with superlift) t 650 (10m working radius)

Max. rated lifting moment t·m 4184

Max. rated lifting moment (with superlift) t·m 8655


Length of boom (with superlift) m 36~108

Length of mixed boom m 66~102

Length of mixed boom (with superlift) m 90~138

Length of luffing jib m 24~84

Length of luffing jib (with superlift) m 24~96

Length of fixed short jib m 12~36

Length of heavy-duty fixed short jib m 12

Combination of longest arm (LJDB operating condition) m 96+96/108+60

Max. length of Wind power combination (without superlift) m 102+12

Max. length of Wind power combination (with superlift) m 108+12

Boom luffing angle 30~85

Jib luffing angle 15~75

Max. single rope speed of main winch (outermost layer) m/min 110

Max. single rope speed of auxiliary winch (outermost layer) m/min 105

Max. single rope speed of main luffing (outermost layer) m/min 48×2

Max. single rope speed of auxiliary luffing (outermost layer) m/min 105

Max. single rope speed of superlift luffing (outermost layer) m/min 120

Slewing speed (no load) r/min 0.6, 1.2 (two gearshifts)

Travel speed km/h 0~1.0(high speed)\0~0.4(low speed)

Gradeability (with basic boom and driver’s cab backward) % 15

Rated engine output power kW/r/min 400/2000

Total weight (with basic boom, 190t rear counterweight, and 80t central counterweight, 650t hook block)

t 510

Average ground pressure (basic boom, 190t basic machine counterweight, and 80t central counterweight, with 650t hook block)

MPa 0.15

Rear counterweight of basic machine t 190

Superlift counterweight t 310

Central counterweight t 80

Max. transport dimension of single unit(length*width* height) mm 12270×3380×3400

Max.transport weight of single piece t 70

SANY CRAWLER CRANE

23

Performance Data

SCC8100

SCC8100

● Safe control system:

Two convenient and reliable modes of operation; working and installation, with real-time level display, stop operation braking away from machine, electrical emergency control, anti-lightning protection, automatically walk switches, CCTV monitoring function, complete safety and supervision system.


load-sensing, limit load regulation and electro-hydraulic proportional micro-speed control make each micro-movement extremely good and operation more stable.

● Reliable functions assurance

Key components use famous international brands.



● Flexible configuration combinations

Free hook master winch or both main and hove winch with free hook; crawler crane can choose excavator-type crawler crane. ● Large chassis design

Track frame which can be broadened, ensuring excellent machine and job stability within the range of 360°rotation. ● Optimized transport programs

● Reliable transmission system

● A variety of optional configurations


Main Boom(H)


Max. rated torque t•m 380

Boom length m 67

Boom luffing angle ° 20-80

Fixed Jib (Optional)

Max. rated lifting capacity t 8.5

Fixed jib length m 18

Boom luffing angle ° 30～80

Angle between boom and jib ° 15/30

Working Speed

Rope speed of main hoist m/min 0～130

Rope speed of main luffing m/min 73

Swing speed rpm 2.92

Traveling speed km/h 0～2

Gradeablility % 30

Engine type - QSC 8.3

Output power/Rated speed kW/rpm 183/2100

Weight of whole machine t 88


Rear counterweight t 27.4+10


Transportation dimensions（L×B×H） m 13.23×3.45×3.49

SANY CRAWLER CRANE

25

Performance Data

SCC8200

SCC8200

● Safe control system

Two convenient and reliable modes of operation; working and installation, with real-time level display, stop operation braking away from machine, electrical emergency control, anti-lightning protection, automatically walk switches, CCTV monitoring function, complete safety and supervision system.


Load-sensing, limit load regulation and electro-hydraulic proportional micro-speed control make each micro-movement extremely good and operation more stable.

● Reliable functions assurance

Key components use famous international brands.



● Self-assembly/disassembly

technology with high efficiency

● Optimized transportation program

● Large chassis design

● Auto-direction traveling


Main Boom(H)


Boom length m 16~86


Fixed Jib (FJ)

Max.boom length+Max.jib length m 71.5+31

Angle between boom and jib ° 10，30

Luffing Jib(LJ)

Max. rated torque t•m 40.7×18

Max.boom length+Max.luffing length m 52+51


Luffing angle ° 15～75

Working Speed

Rope speed of main (auxiliary) winch(outermost working layer) m/min 0～125

Rope speed of main luffing winch (outermost working layer) m/min （0～44）×2

Rope speed of auxiliary luffing winch

(outermost working layer)m/min 0～44

Slewing speed rpm 0～2

Travel Speed km/h 0～1.5

Gradeability % 30

Engine Output power /Rated speed kW/ rpm 242 /2100

Transportationparameters

maximum transport weight of single piece(including main/auxiliary hoisting winch) t 43

Transport dimensions（L×B×H） mm 11130×3000×3400

Crawler Average ground pressure MPa 0.1

● Optional fuel heater

● Engine with two-stage filter

SANY CRAWLER CRANE

27

Performance Data

SCC8300

SCC8300

● Environment adaptability

Working temperature between -40°C (-72°F) and 85°C (153°F).

● Operation mechanism

Luffing time, 2 minutes; main hoisting speed 140m/min; slewing speed, 1.85r/ min; travel speed, 1.3km/h.


Performance Index Unit Parameters


Max. rated lifting capacity 1674

Main Boom(H)

Max. rated lifting capacity t 300t

Max. rated torque t•m 1674

Boom length m 20～92m

Boom luffing angle ° 30 ～84

Combined Boom


Combined boom length m 58～100m

Combined boom luffing angle ° 30 ～84

Boom+Luffing jib



Luffing jib length m 18～66m


Jib luffing angle ° 15～77

Extension boom Max. rated lifting capacity t 30t

Boom+Fixed jib(Optional)



Fixed jib length m 13～42m


Angle between boom and jib ° 10/20/30

Combined Boom +Fixed jib（Light duty）


(Optional) m 64～88m


Boom luffing angle ° 30～87m

Angle between boom and jib ° 10/20/30

Boom+Luffing jib+Fixed jib（Light duty）


(Optional) m 56～62m

Luffing jib length m 48～60m



Luffing jib luffing angle ° 65～77

Angle between fixed jib and boom ° 10°


Boom+Fixed jib（Heavy duty）



Angle between fixed jib and boom ° 10/15/20

SANY CRAWLER CRANE

29

Performance Data

SCC10000

SCC10000

MAIN PERFORMANCE DATA OF SCC10000 CRAWLER CRANEPerformance index Unit Data


Max. rated lifting capacity t 727Max. rated lifting moment t·m 653×8Length of boom m 30～90Boom luffing angle ° 30～85

Operating condition of boom with superlift

Max. rated lifting capacity t 1000Max. rated lifting moment t·m 14000Length of boom m 42～120Length of superlift mast m 42Operating angle of boom ° 30～85

Operating condition of luffing jib

Max. rated lifting capacity t 349Length of boom m 42～60Length of jib m 30～96Fully extended boom + fully extended jib m (48+96)(54+84)(60+48) Operating angle of boom ° 65～87(65° 75° 85° 87°)Operating angle of jib ° 20～77

Operating condition of luffing jib with superlift

Max. rated lifting capacity t 463Length of boom m 42～96Length of jib m 30～96Fully extended boom + fully extended jib m (96+96)Length of superlift mast m 42Operating angle of boom ° 65～87(65° 70° 75° 80° 85° 87°)Operating angle of jib ° 20～77

Operating condition of heavy-duty short fixed jib

Max. rated lifting capacity t 618Length of boom m 42～60Length of jib m 18Operating angle of boom ° 30～85

Operating condition of light-duty short fixed jib

Max. rated lifting capacity t 463Length of boom m 42～96Length of jib m 18Operating angle of boom ° 30～85

Speed datat

Rope speed of main winch m/min 0~110Rope speed of auxiliary winch m/min 0~110Rope speed of main luffing winch m/min (0~60)×2Rope speed of auxiliary luffing winch m/min 0~110Rope speed of superlift luffing winch m/min 0~110Slewing speed rpm 0~0.45/0~1.0Travel speed km/h 0~0.4/0~1.1

EngineRated output power kW 597Rated speed rpm 2100Volume of fuel tank L 1200

T r a n s p o r t a t i o n parameter

Crane weight (basic arm) t 760Rear counterweight + central counterweight + superlift counterweight

t 250+80+450

Maximum transport weight of single piece t 60Maximum transport dimensions (length X width X height)

mm 13930×3400×3130

Ground pressure (basic arm) MPa 0.165


● Independent electric control software

● Optimized chassis design


● All-enclosed hydraulic system

● Centralized lubrication

● Base with outriggers

● Load moment limiter system

● Hoisting simulation software







● More operation conditions

Suitable for wind power, fire power, petrochemical, bridges and large venues, etc.

● Modularized combination

Fast assembly and disassembly solve the troubles in transportation of oversized or overweight members.

SANY CRAWLER CRANE

31

Performance Data

SCC16000

SCC16000



● Modular design

● Application of high-strength plate

● Standard container power unit

● Generator group

220V generator group is equipped to supply the power to the civil air conditioning in the cab and overall crane lighting system.

● New materials applications

● New technology application

Realize the superlift counterweight leaving the ground completely through the accurate calculation, and accurately give the utilization of super-lift counterweight before leaving the ground.


● High efficient self-assembly

techniques


● Traveling with 100% load

● Wireless remote control device


Performance index Unit Parameters

Maximum rated lifting capacity (HDB) t 1600

Maximum rated lifting moment (HDB) t·m 25000


Jib length m 36~108

Length of superlift mast m 50

Superlift radius m 21 / 24 / 27 / 30

Longest boom + longest jib m 108+108

Wire speed of main hoisting mechanism (outmost) m/min 121

Wire speed of auxiliary hoisting mechanism (outmost) m/min 80.9

Wire speed of main luffing mechanism (outmost) m/min 58.3

Wire speed of auxiliary luffing mechanism (outmost) m/min 89.5

Wire speed of superlift luffing mechanism (outmost) m/min 98.1

Slewing speed r/min 0~0.41

Travel speed km/h 1.02

Maximum gradient capability % 10

Maximum engine power kw 746(1800r/min)

Maximum engine torque N·m 4629 (1300rpm)

Overall weight (without superlift counterweight) t 1169 (Basic boom/jib, with 1600t hook)

Average ground bearing pressure MPa 0.255 (Basic boom/jib, with 1600t hook)

Max. transport weight of single part t 67

Max. transport dimension of single part m 6.1×3.65×3.5

SANY CRAWLER CRANE

33

Network

Notes

SANY CRAWLER CRANE

35

Quality Changes the World

Date post:	26-Aug-2018
Category:	Documents
Upload:	truongthien
View:	215 times
Download:	0 times

CRAWLERCRANE collection - Top Mech – Your …Cranes.pdf · SANY CRAWLER CRANE. Performance Data...

Documents