Enter <filename>, choose location (file path),Choose Analog or Mixed A/D
Select create a blank project
Congratulations… your very own schematic window
Add libraries by placing a part
Navigate to find *.olb librariesFind your ese311.olb file
Here is the library
Here are the devices
You need to add the library file again
Now add any other library you need to create your circuit to
simulate.
Create your simulation test bench
Set your stimulus
Add your PSPICE model file: ese311.lib
Associate it with PSpice Profile. Move this file down to subdirectory Model libraries
Simulate!
Make sure the model *.lib file is here