CREATE YOUR STYLE MINI PROJECTS CHRISTMAS filemini project “christmas 2011” STEP 1: Using Rivoli...

CREATE YOUR STYLEMINI PROJECTS

2011CHRISTMAS

WWW.CREATE-YOUR-STYLE.COM

Materials

SWAROVSKI ELEMENTS

Product Group Article No. Amount Size Color Color Code

Sew-on Stones 3700 6 pcs. 6 mm Crystal Vitrail Medium, 001 VM,

Fern Green or Emerald 291, 205





Beads 5328 27 pcs. 3 mm Crystal AB 001 AB

Beads 5328 6 pcs. 3 mm Crystal Metallic Light Gold 2x 001 MLG2

Beads 5328 27 pcs. 3 mm Fern Green 291

Beads 5328 27 pcs. 3 mm Fuchsia 502

Beads 5328 27 pcs. 3 mm Light Siam 227

Beads 5328 27 pcs. 3 mm Sapphire 206

Beads 5328 27 pcs. 3 mm Topaz 203


Beads 5601 6 pcs. 4 mm Siam 208

Supplies: 6 1” Beading Hoop 4 TierraCast Silver headpins 2” (01-0029-01)

Continuation on next page

FOREST OF WINE CHARMS

MINI PROJECT “CHRISTMAS 2011”


“Forest of Wine Charms”, page 2


STEP 1: String onto one silver headpin: one Swarovski Bead art. 5601 4 mm, one Sew-on Stone art. 3700 10 mm, one Sew-on Stone art. 3700 8 mm, one Sew-on Stone art. 3700 6 mm; one Bead art. 5328 3 mm Crystal Metallic Light Gold 2x.

STEP 2: Turn a simple loop or wire wrap onto headpin.

STEP 3: Repeat steps 1 – 2 times 5 and set aside.

STEP 4: Slide on thirteen Swarovski Beads art. 5328 3 mm Topaz, one Bead art. 5328 4 mm Crystal Metallic Light Gold 2x, one tree component, one Bead art. 5328 4 mm Crystal Metallic Light Gold 2x, and fourteen Beads art. 5328 3 mm Topaz. Above the last Crystal make a bend at a right angle.

STEP 5: Repeat step 4 for each of the 5 remaining Swarovski Bead art. 5328 colors.

Instructions

STEP 1: Using one headpin, slip on one Swarovski Bead art. 5601 4 mm Siam, one Sew-on Stone art. 3700 14 mm Fern Green, one Sew-on Stone art. 3700 12 mm Fern Green, one Sew-on Stone art. 3700 10 mm Fern Green, one Sew-on Stone art. 3700 8 mm Fern Green, one Sew-on Stone art. 3700 6 mm Fern Green and one Bead art. 5328 4 mm Metallic Light Gold 2x. Wire wrap a loop on the headpin (Note: before closing off the loop, attach the loop to the bottom hole on the Paloma connector making sure to orient the connector in the correct direction). Repeat this step for the other pair. STEP 2: Using one headpin, slip on one Swarovski Bead art. 5500 9x6 mm Topaz. Wire wrap a loop on the headpin (Note: before closing off the loop attach to the wire wrapped loop from step 1). Repeat this step for the other pair.

STEP 3: Using the add-a-bead ear wire, load on one Swarovski Bead art. 5328 4 mm Topaz. Turn a simple loop on the earwire. Open up the loop and attach to the top hole of the Paloma connector. Repeat this step for the other pair.

Instructions

SWAROVSKI ELEMENTS


Sew-on Stones 3700 2 pcs. 6 mm Fern Green 291






Beads 5328 2 pcs. 4 mm Topaz 203

Beads 5500 2 pcs. 9x6 mm Topaz 203


Supplies: 4 TierraCast Silver headpins 2” (01-0029-01) 2 TierraCast Paloma connector (94-3129-12) 2 TierraCast Silver ear wires (90-1120-00)

Materials

PARTRIDGE IN A PEAR TREE

EARRINGS



STEP 1: Using Rivoli connector glue in one Round Stone art. 1122 12 mm from the SWAROVSKI ELEMENTS assortment. Repeat for pair and set aside to dry.

STEP 2: Slip onto one silver headpin: one Swarovski Bead art. 5601 4 mm, one Sew-on Stone art. 3700 10 mm, one Sew-on Stone art. 3700 8 mm, one Sew-on Stone art. 3700 6 mm, one Bead art. 5328 3 mm.

STEP 3: Turn a simple loop or wire wrap closed.

STEP 4: Repeat steps 2 – 3 times 3 and set aside.

Instructions

SWAROVSKI ELEMENTS


Round Stones 1122 2 pcs. 12 mm Crystal AB 001 AB

Sew-on Stones 3700 6 pcs. 6 mm Crystal AB 001 AB




Beads 5328 4 pcs 3 mm Crystal AB 001 AB

Beads 5328 4 pcs. 4 mm Crystal AB 001 AB

Beads 5601 6 pcs. 4 mm Crystal 001

Supplies: 6 TierraCast Silver headpins 2” (01-0029-01) 2 TierraCast Rivoli connector 3 to 1 (94-3122-61) 2 TierraCast Silver ear wires (90-1120-00) 10 TierraCast Oval jump ring (01-0018-01) Two part Epoxy

Materials

WHITE FORESTCHANDELIERS




“White Forest Chandeliers”, page 2


STEP 5: Slip onto one silver headpin: one Bead art. 5601 4 mm, one Sew-on Stone art. 3700 12 mm, one Sew-on Stone art.3700 10 mm, one Sew-on Stone art. 3700 8 mm, one Sew-on Stone art. 3700 6 mm, one Bead art. 5328 4 mm.

STEP 6: Turn a simple loop or wire wrap closed.

STEP 7: Repeat steps 5 – 6 one more time and set aside.

STEP 8: Using Rivoli connector open an oval jump ring and attach the small tree component to the an outside loop on the connector. Repeat for opposite outside loop on connector.

STEP 9: Open remaining jump rings. Link 4 jump rings to center loop on connector. Open last jump ring and attach large tree.

STEP 10: Using the add-a-bead ear wire, load on one Swarovski Bead art. 5328 4 mm Crystal AB. Turn a simple loop on the ear wire. Open up the loop and attach to the top hole of the Rivoli connector.

STEP 11: Repeat steps 8 – 10 to make second earring.

SWAROVSKI ELEMENTS


Sew-on Stones 3700 3 pcs. 6 mm Crystal Vitrail Medium 001 VM

Sew-on Stones 3700 2 pcs. 6 mm Emerald 205











Beads 5328 5 pcs. 3 mm Crystal Metallic Light Gold 2x 001 MLG2x

Beads 5328 2 pcs. 4 mm Crystal Metallic Light Gold 2x 001 MLG2x


Materials


CHARMING TREEBRACELET



Supplies: 7 TierraCast Gold headpins 2” (01-0029-09) 1 TierraCast Wreath & Bow Clasp set (94-6172-27) 1 TierraCast Candy Cane Charm (94-2347-27) 1 TierraCast St. Nick Charm (94-2348-27) 1 TierraCast Christmas Bells Charm (94-2349-27) 1 TierraCast Nutcracker Charm (94-2350-27) 1 TierraCast Gingerbread man Charm (94-2354-27) 1 TierraCast Frosty Charm (94-2355-27) 8 TierraCast Oval jump ring (01-0018-27) 7” brass rolo chain

“Charming Tree Bracelet”, page 2


STEP 1: Slip onto one gold headpin: one Swarovski Bead art. 5601 4 mm Siam, one Sew-on Stone art. 3700 10 mm Emerald, one Sew-on Stone art. 3700 8 mm Emerald, one Sew-on Stone art. 3700 6 mm Emerald, one Bead art.5328 3 mm Crystal Metallic Light Gold 2x.

STEP 2: Turn a simple loop.


STEP 4: Slip onto one gold headpin: one Swarovski Bead art. 5601 4 mm Siam, one Sew-on Stone art. 3700 12 mm Crystal Vitrail Medium, one Sew-on Stone art. 3700 10 mm Crystal Vitrail Medium, one Sew-on Stone art. 3700 8 mm Crystal Vitrail Medium, one Sew-on Stone art. 3700 6 mm Crystal Vitrail Medium, one Bead art. 5328 3 mm Crystal Metallic Light Gold 2x.


STEP 6: Repeat steps 4 – 5 two more times and set aside.

STEP 7: Slip onto one gold headpin: one Swarovski Bead art. 5601 4 mm Siam, one Sew-on Stone art. 3700 14 mm Fern Green, one Sew-on Stone art. 3700 12 mm Fern Green, one Sew-on Stone art. 3700 10 mm Fern Green, one Sew-on Stone art. 3700 8 mm Fern Green, one Sew-on Stone art. 3700 6 mm Fern Green, one Bead art. 5328 4 mm Crystal Metallic Light Gold 2x.



STEP 10: Open all jump rings and attach one to each charm. Set aside.

STEP 11: Attach Crystal trees and Victorian charms onto chain at desired intervals.

STEP 12: Attach toggle clasp set with jump rings to each end of chain.

Instructions

Instructions

SWAROVSKI ELEMENTS



Beads 5328 38 pcs. 4 mm Dark Red Coral 396

Beads 5328 16 pcs. 4 mm White Alabaster 281


Beads 5500 2 pcs. 9x6 mm Jet 280

Beads 5601 4 pcs. 4 mm Jet 280

Rondelles 4720/101/012/001 2 pcs. 5.5 mm Crystal 001

Rondelles 77505P1600O 4 pcs. 5 mm Montana (gold plated) 207

Supplies: 1 pair TierraCast ear wires (90-3120-00) 2 2” 21 gauge gold plated balled headpins 2 18” pieces 28 gauge Artistic gold plated wire

Materials

STEP 1: Slip on (2) Swarovski Beads art. 5601 4 mm Jet and (2) Beads art. 5328 4 mm White Alabaster onto (1) 18” piece of wire.

STEP 2: Keeping Swarovski Beads in center of wire, take one end of wire and weave back through the two Beads in White Alabaster keeping tension on the wire (Note: wire tails should exit beads in opposite directions).

STEP 3: Add (2) Swarovski Beads art. 5328 4 mm White Alabaster onto one wire tail. Take the opposite wire tail and weave back through the two SWAROVSKI ELEMENTS just added (Note: wire tails should exit in opposite directions). Repeat this step once.


CHRISTMAS TOY SOLDIERS

EARRINGS



STEP 4: Add (1) Swarovski Bead art. 5328 Dark Red Coral, (1) Bead art. 5328 Metallic Light Gold 2x and (1) Bead art. 5328 Dark Red Coral onto one side of the wire. Take the opposite wire and weave back through the SWAROVSKI ELEMENTS just added (Note: wire tails should exit Beads in opposite directions). Repeat 2 more times using (3) Beads art. 5328 4mm Dark Red Coral for each row.

STEP 5: Using wire on right side, make a loop ~4 mm in diameter. Repeat on left side (Note: the loops should sit at right angles to the body). The loops are used as a socket for the arms.

STEP 6: Slip onto each wire tail (1) Swarovski Bead art. 5328 Dark Red Coral (Note: do not pull on the wire, the loop shape must be maintained).

STEP 7: Keeping both wires together slide on (1) Swarovski Bead art. 5000 8 mm Crystal, (1) 5.5mm Rondelle and (1) Swarovski Bead art. 5500 9x6 mm Jet (Note: keeping the point side facing the Rondelle).

STEP 8: Keeping both wires together, create a wire wrapped loop.

STEP 9: Create the arms using (1) balled head pin, load on (1) Swarovski Bead art. 5328 Dark Red Coral, (1) Rondelle 5mm Montana and slide the head pin through the 4mm loop, coming off the shoulder, made in step 5 (Note: the open end of the head pin should be pointing away from the head of the soldier). Add (3) Swarovski Beads art. 5328 Dark Red Coral and (1) Bead art. 5328 White Alabaster. Keeping the Beads tucked next to each other, cut off the remaining wire ~5 - 6 mm from the last Bead. Turn a loop and flatten if desired. Repeat for the other arm.

STEP 10: Slip (1) Swarovski Bead art. 5328 Dark Red Coral onto an add-a-bead ear wire and turn a loop. Open loop and attach to the wrapped loop on the toy soldier.

STEP 11: Repeat steps 1 – 10 to make matching pair.

“Christmas Toy Soldier Earrings”, page 2


SWAROVSKI ELEMENTS


Christmas Tree Charm

Sew-on Stones 3700 1 pc. 6 mm Fern Green 291





Beads 5328 1 pc. 4 mm Crystal Metallic Light Gold 2x 001 MLG2

Beads 5601 1 pc. 4 mm Siam 08

Snowman Charm

Sew-on Stones 3128 1 pc. 8 mm Jet 280

Beads 5000 1 pc. 6 mm Crystal 001



Beads 5601 1 pc. 4 mm Jet 280

Rondelles 77504 P13000 1 pc. 4 mm Emerald 205

A CHARMINGMINI PROJECT “CHRISTMAS 2011”



Materials

CHRISTMAS


Toy Soldier Charm


Beads 5328 1 pc. 4 mm Crystal Metallic Light Gold 2x 001 MLG2

Beads 5328 19 pcs. 4 mm Dark Red Coral 396

Beads 5328 8 pcs. 4 mm White Alabaster 281

Beads 5500 1 pc. 9x6 mm Jet 280

Beads 5601 2 pcs. 4 mm Jet 280

Rondelles 4720/101/012/001 1 pc. 5.5 mm Crystal 001

Rondelles 77505P1600O 2 pcs. 5 mm Montana (gold plated) 207

Candy Cane Charm



Beads 5328 6 pcs. 4 mm Dark Red coral or Light Siam 396 or 227

Artemis Angel Charm



Beads 5540 1 pc. 12mm Crystal 001

Rondelles 77504 P13000 1 pc. 4 mm Crystal 001


Supplies: 4 TierraCast Silver headpins 2” (01-0029-01) 5 TierraCast Oval jump ring (01-0018-01) 1 TierraCast Wreath & Bow Clasp set (94-6172-12) 1 TierraCast Candy Cane Charm (94-2347-12) 2 TierraCast Nutcracker Charm (94-2350-12) 1 TierraCast Frosty Charm (94-2355-12) 1 TierraCast Christmas Tree Charm (94-2353-12) 1 TierraCast Angel Charm (94-2352-12) 1 TierraCast Bow Bead (94-5610-12) 1 TierraCast Wing Bead (94-5600-12) 4 Beadalon C-Crimp cord ends 10 Open jump rings 4mm 6” curb chain silver 6” small cable chain silver 1 foot 3mm Red Suede Beadalon 1 foot 20 gauge Artistic Wire silver



“A Charming Christmas”, page 2

STEP 1: Slip onto one headpin: one Swarovski Bead art. 5601 4 mm Siam, one Sew-on Stone art. 3700 14 mm Fern Green, one Sew-on Stone art. 3700 12 mm Fern Green, one Sew-on Stone art. 3700 10 mm Fern Green, one Sew-on Stone art. 3700 8 mm Fern Green, one Sew-on Stone art. 3700 6 mm Fern Green, one Bead art. 5328 4 mm Crystal Metallic Light Gold 2x.

STEP 2: Wire wrap and set aside.

Instructions



Christmas Tree Charm

STEP 1: Slip onto one headpin: one Bead art. 5000 10 mm Crystal, one Bead art. 5000 8 mm Crystal, one Swarovski Rondelle Emerald, one Bead art. 5000 6 mm Crystal, one Sew-on Stone art. 3128 8 mm Jet, and one 5601 4 mm Jet.

STEP 2: Wire wrap and set aside.

Snowman Charm

STEP 1: Slip on (2) Beads art. 5601 4 mm Jet and (2) Beads art. 5328 4 mm White Alabaster onto (1) 18” piece of wire.

STEP 2: Keeping SWAROVSKI ELEMENTS in center of wire, take one end of wire and weave back through the two Beads in White Alabaster keeping tension on the wire (Note: wire tails should exit beads in opposite directions).

STEP 3: Add (2) Beads art. 5328 4 mm White Alabaster onto one wire tail. Take the opposite wire tail and weave back through the two SWAROVSKI ELEMENTS just added (Note: wire tails should exit in opposite directions). Repeat this step once.

STEP 4: Add (1) Bead art. 5328 Dark Red Coral, (1) Bead art. 5328 Crystal Metallic Light Gold 2x and (1) Bead art. 5328 Dark Red Coral onto one side of the wire. Take the opposite wire and weave back through the SWAROVSKI ELEMENTS just added (Note: wire tails should exit Beads in opposite directions). Repeat 2 more times using (3) Beads art. 5328 Dark Red Coral for each row.

STEP 5: Using wire on right side, make a loop ~4 mm in diameter. Repeat on left side (Note: the loops should sit at right angles to the body). The loops are used as a socket for the arms.

STEP 6: Slip onto each wire tail (1) Bead art. 5328 Dark Red Coral (Note: do not pull on the wire, the loop shape must be maintained).

STEP 7: Keeping both wires together slide on (1) Bead art. 5000 8 mm Crystal, (1) Swarovski Rondelle 5.5 mm Jet and (1) Bead art. 5500 9x6 mm Jet (Note: keeping the point side facing the Rondelle).

Toy Soldier Charm


STEP 8: Keeping both wires together, create a wire wrapped loop.

STEP 9: Create the arms using (1) balled head pin, load on (1) Bead art. 5328 Dark Red Coral, (1) Swarovski Rondelle 5 mm Montana and slide the head pin through the 4 mm loop, coming off the shoulder, made in step 5 (Note: the open end of the head pin should be pointing away from the head of the soldier). Add (3) Beads art. 5328 Dark Red Coral and (1) Bead art. 5328 White Alabaster. Keeping the SWAROVSKI ELEMENTS tucked next to each other, cut off the remaining wire ~5 - 6 mm from the last Bead. Turn a loop and flatten if desired. Repeat for the other arm.

STEP 10: Slip (1) Bead art. 5328 Dark Red Coral onto an add-a-bead ear wire and turn a loop. Open loop and attach to the wrapped loop on the toy soldier.




STEP 1: String onto one headpin: one Bead art. 5328 3 mm Crystal, one Bead art. 5328 4 mm Dark Red Coral, one Bead art. 5328 4 mm Crystal, one jump ring, one Bead art. 5328 4 mm Dark Red Coral, one Bead art. 5328 4 mm Crystal, one Bead art. 5328 4 mm Dark Red Coral, one Bead art. 5328 4 mm Crystal, one silver bow bead finding (upside down), one Bead art. 5328 Dark Red Cora, one Bead art. 5328 4 mm Crystal, one Bead art. 5328 4 mm Dark Red Coral, one Bead art. 5328 4 mm Crystal, one Bead art. 5328 4 mm Dark Red Coral, and one Bead art. 5238 3 mm Crystal.

STEP 2: Turn a small loop at end of headpin.

STEP 3: Hold beaded headpin so the loop is at bottom. Bend headpin to form a “hook”. The headpin should start to bend at the second Swarovski Bead art. 5328 4 mm Crystal after the bow.

Candy Cane Charms

STEP 1: String onto one headpin: one Bead art. 5040 6 mm Crystal, one Bead art. 5540 12 mm Crystal, one silver wing bead finding, one Bead art. 5000 6 mm Crystal, and one Swarovski Rondelle 4 mm Crystal.

STEP 2: Turn a small loop at end of headpin.

Artemis Angel Charm

STEP 1: Cut six 1.5” pieces of 20 gauge wire. Cut six 1” piece of small cable chain. Note: each piece should have the same link count.

STEP 2: Using cut wire create a simple loop, slide on one Bead art. 5714 and create a second simple loop. Repeat times five and set aside.

To Assemble Nacklace

STEP 3: Open one 4 mm jump ring and attach one piece of cable chain and one TierraCast Charm; close jump ring. Open one loop of star component and attach to opposite end of chain. Repeat for remaining 5 charms. Set aside.

STEP 4: Attach an oval jump ring to each crystal charm. Set aside.

STEP 5: Lay out curb chain and attach all metal and crystal charm components at desired intervals. (Note: remember to hold chain in same position so that each charm will hang on the same side of the chain. Hint: For ease of charm attachment begin in center of chain for attaching.)

STEP 6: Cut suede lace into two even pieces for your finished desired length of necklace. Attach a cord end to each of the four ends of the suede lace.

STEP 7: Attach one 4mm round jump ring to one cord end and one end of curb chain. Repeat for opposite side.

STEP 8: Attach a 4mm round jump ring to the remaining ends of the suede lace. Before closing jump rings attach one half of the wreath toggle set to each side. Close jump rings.



Date post:	07-Nov-2019
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

CREATE YOUR STYLE MINI PROJECTS CHRISTMAS filemini project “christmas 2011” STEP 1: Using Rivoli...

Documents