All the Podsabilities!GrowCross Podinate
Add BordersEverything but the
Quilt
2 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Irish Chain QuiltIncludes precut patchwork and binding fabric. Finished unit 6"
1 Pods®
29" x 39"2 Pods®
42" x 48"3 Pods®
54" x 66"5 Pods®
72" x 84"
Ready to sew, designed to grow! Pre-cut patchwork and binding strips beautifully packaged with instructions.
Designed to grow!
Four Square QuiltIncludes precut patchwork and binding fabric. Finished block 12"
1 Pods®
36" x 48"2 Pods®
48" x 72"3 Pods®
72" x 72"4 Pods®
72" x 96"
Corner Cabin QuiltIncludes precut patchwork and binding fabric. Finished block 12"
1 Pods®
36" x 48"2 Pods®
48" x 72"3 Pods®
72" x 72"4 Pods®
72" x 96"
3
POD-MAS06-WYMC30" X 42"
IRISH CHAIN QUILT
POD-MAS07-WYMC36" X 48"
FOUR SQUARE QUILT
POD-MAS08-WYMC36" X 48"
CORNER CABIN QUILT
All The Podsabilities!Double Irish Chain with two Irish Chain Pods®
P 4-5
Four Square RemixNew layout with double borders
P 6-7
Everything but the Quiltaccessories made with one Corner Cabin Pods®
P 8-9
2 Pod Cross PodinateIrish Chain and Four Square Pods®
P 10-13
3 Pod Cross PodinateIrish Chain, Four Square, and Corner Cabin Pods®
P 14-19
Bonus PillowsWith left over pieces from the 3 Pod Cross Podinate
P 20-23
4 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Grow aDouble Irish Chain with two Irish Chain Pods®
finished size40" x 50"
There is some cutting required to make the Double Irish Chain Quilt.No Additional fabric is required to make the top.
Double
Irish C
hain
5Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
3. Sew a (A-H) square to either side of step 1 strip. Make 20.
4. Sew the step 3 unit to the top and bottom of the step 2 units. Make 10.
4. For each block select (13) I squares and (12) A-H squares.
5. Sew together in rows as illustrated to make a (5) alternating rows. Press to nest seams. Sew row to row. Make 10.
Make the following blocks using the precut pieces from your Irish Chain Pods® kits.
Follow the instructions below to make the double Irish Chain blocks.Blocks are 10-1/2" square (10" square finished.) There will be leftover pieces.
Lay the quilt top out as illustrated on the opposite page.
1. Cut (2) 2-1/2" x 6-1/2" pieces from (10) J pieces for a total of (40) strips.
2-1/2"
JJ
2-1/2"
2. Sew a step 1 strip to either side of a J piece. Make 10.
6 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
New 2 Pod Layout + Borders using Binding StripsFour Square Remix with 2 Four Square Pods®
finished size60" x 72
Additional Supplies:Outer Borders:
Option 1: 7/8 yard (non-directional): cut (7) 4-1/2" x WOF stripsOption 2: 1-3/8 yards (directional): cut (4) 4-1/2" x WOF strips, cut (4) 4-1/2" x LOF strips
Binding1/2 yard: cut (7) 2-1/2" x WOF strips
Four Square
Remix
+ Bord
ers
7Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Make the following blocks using the precut pieces from your Four Square Pods® kits.This is a different layout than in the original instructions. There will be leftover pieces.
The inner border is made with the precut binding strips from the Pods® kits. You will need 7 pieces.The outer border and binding require additional supplies.
Top Assembly Diagram
Make 8 12-1/2" square 6-1/2" x 12-1/2" 6-1/2" x 12-1/2" 12-1/2" square
Make 2 Make 2 Make 6 Make 7
J J
JJI I
I I
Use 'I' and 'J' pieces Use A/B/C/D/E/F/G/H pieces
8 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
H2
G2 G2
BindingBindingBinding
Binding
Let's get creative!Everything but the Quilt with one Corner Cabin Pods® Kit
Book Coversome cutting required
Pillowinstructions on p.21
Optional: add binding 'flower' withbutton in center
additional supplies:18" pillow form
3/4 yard backing22" x 22" piece of batting and muslin
Top: (1) H2Bottom: (2) A squares
Sides: (2) G2bookmark: (2) B1
Top: (1) H2Bottom: (3) 12-1/2" pieces cut from a binding strip
Sides: (2) C2Binding: (2) 10-1/2" pieces cut from a binding strip
1 Corn
er Cabin
Pods®
H2
G2EF1 B2 C2G1
F2 B1
C1G2
AG2
A
B1
A
9Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Zip PouchTop: (2) D2
Main: (2) H2Bottom: (1) H1
Bucket Top: (4) D2 (*2 for interior lining)
Main: (2 ea.) F2, G2, B2, C2Bottom: (1) H1
BasketTop: (2) B1, (2) C2 Main: (2) A squares, (2) D1, (2) H1Bottom: (2) D1Handles: (2) D1
additional supplies:(2) 9-1/2" pieces of 2" webbing(2) 11-1/2" x 15-1/2" lining pieces, batting, fusible interfacing
Pursesome cutting required
Top: (2) H2 Middle: (2) F1 Main: (4) E squaresBottom: (2) G2Handles: (1) binding piece, cut in to 2 equal pieces
additional supplies:(2) 12-1/2" x 12-1/2" lining pieces, batting, lining
additional supplies:12" zipper
12-1/2" x 15-1/2" lining, battingadditional supplies:
12-1/2" x 24" lining, batting, fusible interfacing
E
B1
A
C2
D1
D1
D1
D1
H1
H1 H1H2 H2D2 D2 D2
G2C2
F2 B2
D2
F1
H2
G2
F1
E
Binding
10#maywoodpods
#madewithmaywood
Two Pod Combo: Irish Chain + Four Square Pods®, 48" x 60" Finished
Irish C
hain
Four Square
11Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
1. Follow steps 1-6 in the Irish Chain Pod Instructions to make 18 - Nine Patch blocks.
2. Sew 16 - Nine Patch units to 16 - 'J' squares. Press. Reserve 2 - Nine Patch units for the top and bottom rows of the quilt top.
3. Sew the Nine Patch-Fabric J pairs together to make the Irish Chain Block. Press. Make 8.
12½" x 12½"Make 8
Irish Chain Block
J
J
Irish ChainNine Patch
6½" squareMake 16
12½" x 12½"Make 8
Four Square Block BFour SquareHalf Square Triangle
6½" squareMake 24
Four SquareFour Patch
6½" squareMake 22
2 Pod Cross Pod-inationInstructions for combining the Irish Chain & Four Square Pods into a finished quilt.
Finished size 48" x 60"Backing Needed: 3 yards
For best results, read the pattern completely first.Sew with ¼" seam allowances. Press in the direction of arrows.
4. Follow step 1 in the Four Square Pod Instructions to make 24 - Half Square Triangle units. Reserve 8 for the top and bottom rows of the quilt top.
5. Follow steps 2-3 in the Four Square Pod Instructions to make 22 - Four Patch units. Reserve 6 for the top and bottom rows of the quilt top.
6. Follow steps 6-7 in the Four Square Instructions to make Block B. Press. Make 8.
From 1 Four Square Pod gather:88 - A-H squares(there will be 8 pieces left)
all I and J piecesBinding StripsInstructions
From 1 Irish Chain Pod, gather:all A-H squares
all 'I' squares16 - J Squares (there will be 1 piece left)
Binding StripsInstructions
12 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
2 Pod Cross Pod-ination Top Assembly Diagram7. Assemble the rows in the order illustrated. The top and bottom rows are made from the remaining Nine Patch, Half Square Triangles, and Four Patch units.
9. Layer quilt top, right side up, batting and backing wrong side up. Baste together using your favorite method. Quilt as desired. Trim excess batting and backing.
10. Join the 2½" binding strips from both Pods together, end to end, to create one continuous piece. Press in half lengthwise to make a double-fold binding. Sew to the front of the quilt with a ⅜" seam allowance, then turn the binding to the back side and stitch by hand with matching thread.
Top Row
Row 1
Row 2
Row 3
Row 4
Bottom Row
Share your projects on Social Media#maywoodpods #madewithmaywood
13Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Assembly Diagram: Two Pod ComboCombination shown with Irish Chain and Four Square Pods®
14 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved 14#maywoodpods
#madewithmaywood
Irish C
hain
Four Square
Corner C
abin
Three Pod Combo: Irish Chain + Four Square + Corner Cabin Pods®, 60" x 60" Finished
15Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
3 Pod Cross Pod-inationInstructions for combining the Irish Chain, Four Square, & Corner Cabin Pods into a finished quilt.
Finished size 60" x 60"Backing Needed: 3½ yards
For best results, read the pattern completely first.Sew with ¼" seam allowances. Press in the direction of arrows.
From 1 Four Square Pod gather:80 - A-H squares(there will be 16 pieces left)
all I and J piecesBinding StripsInstructions
From 1 Irish Chain Pod, gather:80 A-H squares (there will be 10 pieces left)
64 'I' squares (there will be 8 pieces left)8 - J Squares (there will be 9 pieces left)
Binding StripsInstructions
From 1 Corner Cabin Pod, gather:Block A: 4 pieces each of E, F1, F2, G1, G2, H1, H2
(there will be 2 of each piece left over)Block B: 2 pieces each of A, B1, B2, C1, C2, D1, D2
(there will be 4 of each piece left over)Binding StripsInstructions
1. Follow steps 1-6 in the Irish Chain Pod Instructions to make 16 - Nine Patch units.
2. Follow step 1 in the Four Square Pod Instructions to make 24 - Half Square Triangle units.
3. Follow steps 2-3 in the Four Square Pod Instructions to make 20 - Four Patch units.
4. Follow steps 2-4 in the Block A in the Corner Cabin Pod instructions to make 4 - A Blocks.
5. Follow steps 6-8 in the Corner Cabin Pod instructions to make 2 - B Blocks.
12½" x 12½"Make 4
Corner CabinBlock B
12½" x 12½"Make 4
Corner CabinBlock A
Irish ChainNine Patch
6½" squareMake 16
Four SquareHalf Square Triangle
6½" squareMake 24
Four SquareFour Patch
6½" squareMake 20
16 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
6. Make the Center Block. Layout the 4- Corner Cabin B Blocks as illustrated (fig. 1). Sew together in pairs (fig 2). Press. Join the pairs together. Press. Square up to 24" x 24".
7. Follow steps 6-7 in the Four Square Pod Instructions to make Block B. Make 8.
8. Lay out 2 - Four Square B blocks as illustrated (Fig 3). Sew together. Press. Make 4.
12½" x 12½"Make 8
Four SquareBlock B
Corner Cabin B Blocks
Four Square Pod steps 6-7
Fig 1 Fig 2Center Block, 24" x 24"
Four Square B Blocks
Fig 3 Make 4, 24½" x 24½"
17Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Make 2, 24½" x 48½"
Make 2, 6½" x 48½"
Make 2, 6½" x 60½"
Corner Cabin Block A Corner Cabin Block AStep 8 Unit
24½" x 48½"
11. Assemble the side borders. Make 2.
12. Assemble the top and bottom borders. Make 2.
10. Sew a Corner Cabin A Block to either side of a Step 8 unit. Press. Make 2.
9. Sew 2 of the Step 8 units to either side of the center block. Press.
18 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
3 Pod Cross Pod-ination Top Assembly Diagram
Share your projects on Social Media#maywoodpods #madewithmaywood
13. Follow the Quilt Assembly Diagram to finish your quilt top. Sew a step 10 unit to the top and bottom of the Step 9 center unit. Press. Attach the side borders. Press. Attach the top and bottom borders. Press.
14. Layer quilt top, right side up, batting and backing, wrong side up. Baste together using your favorite method. Quilt as desired. Trim excess batting and backing. Finished size is 60" x 60" square.
15. Join the 2½" binding strips from all three Pods together, end to end, to create one continuous piece. Press in half lengthwise to make a double-fold binding. Sew to the front of the quilt with a ⅜" seam allowance, then turn the binding to the back side and stitch by hand with matching thread.
19Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Assembly Diagram: Three Pod ComboCombination shown with Irish Chain, Four Square, and Corner Cabin Pods®
20 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
3 Pod Combo: Bonus Pillow Patterns from left-over pieces.Finished size 18" x 18"
Additional Supplies for Each Pillow (not included with the Pods)Pillow Back: 3/4 yard fabric
Backing: 1 piece 22" x 22" fabricBatting: 1 piece of 22" x 22" batting
18" Pillow Form
Corner Cabin PillowFour Square Corner PillowIrish Chain Pillow
These pillow tops are made with the left-over Pods pieces when you make the 3 Pod Cross-podination quilt with the Irish Chain, Four Square, and Corner Cabin Pods. You can make ALL THREE with what is left!
From the Four Square Pod left-overs gather:
16 - A-H squares
From the Corner Cabin Pod left-overs, gather:
2 - H1 strips 1 - H2 strip2 - D1 strips1 - D2 strip
From the Irish Chain Pod left-overs, gather:
10 A-H squares8 -'I' squares 9 - J Squares
From the Corner Cabin Pod left-overs, gather:
Block A: 2 pieces each E, F1, F2, G1, G2, H1
Block B: 2 pieces each A, B1, B2, C1, C2, D1
21Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
Irish Chain Pillow
1. Sew 3 - J Squares together into a strip. Press. Make 3.
2. Sew 4 -'I' squares and 5 - 'A-H' squares in an alternating pattern. Press. Make 2
3. Join the Step 1 strips to the Step 2 strips as illustrated (Fig 1). Press. Trim to 18½" square.
4. Layer pillow top, right side up, over the batting and backing, wrong side up. Baste together and quilt as desired. Trim excess batting and backing to 18½" x 18½" square.
5. Follow the instructions for the Double-Fold Envelope Back Pillow Back on Page 11.
1. Follow steps 2-3 for Block A in the Corner Cabin Pod instructions to make 2 - A Blocks .
2. Follow steps 6-7 for Block B in the Corner Cabin Pod instructions to make 2 - B Blocks.
3. Sew the A Blocks to the B Blocks, making sure to lay them out as illustrated (Fig 1). Press.
4. Join the A-B Block sets together (Fig. 2).
5. Layer pillow top, right side up, over the batting and backing, wrong side up. Baste together and quilt as desired. Trim excess batting and backing to 18½" x 18½" square.
7. Follow the instructions for the Double-Fold Envelope Back Pillow Back on the last page.
Fig. 1 Trim to 18½" square
Corner Cabin Pillow
Fig. 1Fig. 2
22 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
1. Follow steps 2-3 in the Four Square Pod Instructions to make 4 - Four Patch units (Fig. 1).
2. Sew the Four Patch units into pairs (Fig. 2).
3. Sew a Corner Cabin D2 Strip to the top of a Step 2 Unit. Sew a Corner Cabin H2 strip to the bottom of a Step 2 unit. (Fig 4.)
Four Square Corner Pillow
4. Sew a Corner Cabin D1 Strip to the left sides of the Step 3 units (Fig. 4). Sew a Corner Cabin H1 strip to to the right sides of the Step 3 units (Fig 5.)
5. Sew the Step 4 units together.
6. Layer pillow top, right side up, over the batting and backing, wrong side up. Baste together and quilt as desired. Trim excess batting and backing to 18½" x 18½" square.
7. Follow the instructions for the Double-Fold Envelope Back Pillow Back on the last page.
Fig. 1
Fig. 4 Fig. 5
Fig. 2Fig. 3
23Sew Many Podsabilities © 2019 Maywood Studio all rights reserved
1. Cut 2 rectangles 18½" x 27" of the pillow back fabric of your choice. Fold each piece in half, wrong sides togethermatching the short ends. Top stich 1/2" in from the edge of the fold. Press.
2. Layer the pillow back pieces over the quilted pillow top, right side together. Overlap the pieces to match your 18½" x 18½" pillow top. Pin in place. *Note, the pillow backs are double layers, so both sides are right sides!
3. Stitch with a ½" seam allowance alll the way around the pillow back. No need to leave an opening! Clip the corners and turn the right-sides out through the overlapped pillow back pieces. Insert your pillow form and enjoy!
Double-Fold Envelope Pillow Back Instructions
See all the Maywood Studio Pods®
online and in our Marketplace catalog.
maywoodstudio.com