23
CRYO-DERM IONTOPHORESIS + MSG REJUVENATION + Electroporation
CRYO-DERM IONTOPHORESIS + MSG
REJUVENATION + Electroporation
CRYO-DERM
2
INDEX
1. Name and Components
2. Direction to Use
3. Features of Cryo_Derm
4. Principle and Effects of
Cryoelectrophoresis
5. Cryo_Derm Program
6. Cryo_Derm Treatment
7. Specification
8. Warranty Information
CRYO-DERM
3
1. Name and Components
② CRYO & THERMO ELECTROPORATION
② ELECTRO MESO MEDICINE & SOLUTION INJECTION
<Accessories>
PART NAME IMAGE PART NAME IMAGE
Cryo & Thermo
Electrode
Hand piece
Earth Rod
Cryo & Thermo
Electrode for
Body
Injection
Electrode
Hand piece
Earth Rod
Foot Switch for
Injection
CRYO-DERM
4
1. Name and Components
CH.1 Cryo/thermo Control Common Control CH.2 Injection Electrode Control
1CH: Cryo/Thermo Electrode Control
① <MODE> button: Choose Cryo or Thermo Electrode Function
Choose one among 5 modes like Ion soft, Ion hard, Ion lift, Ion MSG, Rejuvenation
② <OFF/MAX> button: Output Intensity of Cryo/Thermo
Amount of Output for Cryo/Thermo and Ion, Ion Lift, Rejuvenation stimulation
③ <PLUS/MINUS> Polarity button: Choose one between (+) and (-)
Choose one when use of Ion soft, Ion hard, Ion lift functions
④ ⑤ <TEMP UP/DOWN>: Settle up temp. using UP/DOWN
COLD -10 ~ +10 HOT +35 ~ +45
2CH: Injection Electrode Control
⑤ <MODE>button: Choose Injection Electrode function
Choose one among 5 modes like Ion soft, Ion hard, Ion lift, Ion MSG, Rejuvenation
⑥ <OFF/MAX> button: Output Intensity of Injection Electrode
Amount of Output for Generating Cryo/Thermo and Ion, Ion Lift, Rejuvenation stimulation.:
⑦ <PLUS/MINUS> Polarity button: Choose one between (+) and (-)
Choose one when use of Ion soft, Ion hard, Ion lift functions
⑧ <FLOW SPEED> control button for volumes of flow
control the volumes of injection flow of ampoule
CRYO-DERM
5
1. Name and Components
Common Control
⑨ <TIME> button: Control time to use. / Setting time: 20min.
⑩ <START/STOP> button
Start/stop the output for Ion, Ion Lift, Rejuvenation stimulation
Objects of Use
- Ampoule Application
- Sedation of sensitive skin, Pore minimization, Increase of blood circulation
- Ion penetration, Skin lift, Skin rejuvenation
This device, Cryo_Derm, is possible to apply to two people at the same time.
HOWEVER, it is impossible to apply ION soft & hard at the same time.
That is
When selection of ION HARD, ION SOFT on 1CH cryo/thermo electrode Mode,
It is not able to use two functions of 2CH.
At this time, ION LIFT, ION MSG, REJUVENATION is only able to be used on 2CH injection mode.
Stand by Screen Processing Screen
CRYO-DERM
6
2. Direction to Use
Direction to use for CH. 1 : Cryo/Thermo Elcetrode
CH.1 Cryo/thermo Control Common Control CH.2 Injection Electrode Control
1. Usage of CH.1 Cryo/Thermo Elcetrode
Start treatment after checking it whether client grip Ground Rod
① <①Mode>- Choose one among 5 functions
② <②PLUS/MINUS> - Choose one between (+) and (-)
It is relevant to 3 Functions like Ion soft, Ion hard, Ion lift.
③ <④⑤Temperature>- Settle up temp. using UP/DOWN button
COLD -10 ~ +10
HOT +35 ~ +45
④ <⑩Time>- Control time to use / Setting time: 20min
⑤ <⑪START> Start the operation after settle up desired Mode, Temp., Time and check the
ground earth rod
⑥ <②Intensity> Control Output rate and Intensity. Slowly turn the intensity up during the
operation Range of Intensity: Control between 0% & 100%
⑦ <⑪STOP> Pause button. The STOP button works pause function during operation.
⑧ In case only Cryo/Thermo is used without electric stimulation
Choose desired Temp.
Do not use Ground Rod because of no electric stimulation
CRYO-DERM
7
2. Direction to Use
Direction to use for CH.2 Injection Electrode
CH.1 Cryo/thermo Control Common Control CH.2 Injection Electrode Control
2. Usage of CH.2 Injection Electrode
Start treatment after checking it whether client grip Ground Rod
① <⑥Mode>- Choose one among 5 functions
② <②PLUS/MINUS> - Choose one between (+) and (-)
It is relevant to 3 Functions like Ion soft, Ion hard, Ion lift.
③ <⑨FLOW SPEED>- Control the volume of injection flow depending on formulation of
ampoules
④ <⑩Time>- Control time by using time button /Setting time: 20min.
⑤ <⑪START> Start the operation after settle up desired Mode, Temp., Time and check the
ground earth rod
⑥ <②Intensity> Control Output rate and Intensity. Slowly turn the intensity up during the
operation Range of Intensity: Control between 0% and 100%
⑦ <FOOT SWITCH> Adjust ampoule injection’s flux stepping FOOT SWITCH. The ampoule
only flows while stepping in the switch. It will be started with “PeeP” sound.
⑧ <⑪STOP> Pause button. The STOP button works pause function during operation.
Low Weak
Medium Medium
High Strong
CRYO-DERM
8
2. Direction to Use
Zero Start Error: If all volumes are not on “Zero” level after you start
the device, you can see the below error massage and warning sound.
So in order to make the device go on, all volume levels are on “Zero”
and then automatically it goes on processing.
After using an injection electrode, the
nozzle could be clogged or have a hygienic
problem because of viscosity of ampoule.
How to work CLEAR Mode: : Proceed the
mode when continue to push “FLOW SPEED”
button for 3 sec.
How to control the nozzle : On the “low” setting and stepping in the food switch, adjust the flow
volume by turning the particle controller. You can adjust the flow setting depending ampoule
density.
CRYO-DERM
9
2. Direction to Use
How to deal with CRYO_DERM after Use.
1) Clean up the main body with dry cloth.
⋇ Possible to occurs variation of the device when using chemicals
2) Clean up the used cryo/thermo electrode with wet cloth first and then use dry cloth
⋇ Possible to occurs variation of the device when using chemicals
3) Remove remaining ampoule on the used injection electrode by tapping it on other hand
covered dry cloth
Clean up the electrode head with wet cloth first and then use dry cloth.
The remaining ampoule keep clogged in the electrodes until next usage
If you don’t use it for more than one day, use the Clean Mode to clean up inside with cleaning
solution taking off ampoule bottle and then store it.
⋇ Possible to occurs variation of the device when using chemicals and may have a problem with
injection pump unless use clear solution.
4) Cleaned injection is stored at its stand. .
⋇ If the injection is put up-down side, the ampoule would be leaked.
5) Change the water in water tank after using 6 ~ 9 months later.
⋇ If period of change cooling water is long, there is problem with cryo/thermo system by cause
of waste material inside.
CRYO-DERM
10
3. Features of Cryo_Derm
1) Cryo and Thermo
Cryo_Derm works by thermoelectric semiconductor to make cool and hot. Surface of
semiconductor is cooling when absorbing the heat and heating when exhausting the heating. So
it works in water based exhaust system for the best effectiveness.
Cooling effect helps skin calm and pores minimize and there is double effect of penetrating ion
when use ion function together. Thermo effect helps blood circulation improve and pores enlarge.
2) Ampoule Injection
It is different that Cryo_Derm has automatic built-in ampoule injection than other equipment
which has a problem that a nozzle is clogged often.
The ampoule injection is able to adjust its flux according to viscosity and kind of ampoule by user
friendly, FOOT SWITCH.
3) Iontophoresis
Cryo_Derm’s iontophoresis works by 3.8 KHz medium frequency which penetrates into deep layer
of skin. It is based on the electrical repulsive power to bring more effective penetration of
vitamins, mineral and collagen than cosmetics or ampoules.
4) Ion-Lifting
Using 250Hz, it would make face-lifting effect by stretching in and out with soft ion feeling and
current penetration principle.
5) Lifting Massage
It is focused on skin lifting effect using both poles of 200Hz medium and low frequency.
6) REJUVENATION
It brings rejuvenation and vitalization effect on skin using bioelectricity which exhales from
body when human does exercise.
CRYO-DERM
11
3. Features of Cryo_Derm
Cryo_Derm is a professional skin care device for those who need professional skin care.
It makes active ampoule applied to skin by using an injection electrode and brings effects
such as skin soothing, contraction and enlargement of pores, improvement of blood
circulation, ion application and ion lifting using a injection electrode.
① Save treatment time by applying ampoule using injection electrode and iontophoresis
simultaneously.
② Maximize iontophoresis’s function using cyro/thermo electrode and improve skin condition
such as skin soothing, contraction and enlargement of pores, improvement of blood circulation.
③ Possible to do treatment two people at the same time.
④ Easy to master in comparison with various functions.
⑤ Be suitable output for individual skin by adjusting fine output
⑥ Possible to control the volume of injection flow according to viscosity and kind of ampoule.
⑦ Possible to use anywhere without special equipment for power supply due to a freeVolt
adaptor built-in.
⑧ Be tailored treatment for individual skin due to various modes.
CRYO-DERM
12
4. Principle & Effects of Cryoelectrophoresis
Principle of Cryoelectrophoresis
Principle of Cryoelectrophoresis
Cryoelectophoresis makes pores’ sizes enlarged to help to penetrate active ingredients into skin
and then when adding electric stimulation, it is maximized that the active ingredients are
penetrated into deeper layer of skin. Cryoelectrophoresis has much more effective penetration
than general electrophoresis.
Cryogen "Cryoelectrophoresis system"
Cryoelectrophoresis system is called “Ice therapy” that penetrates moisture into skin and
maximizes medicines penetration from Meso Therapy without using injector. It brings visible effect
of the medicines as ionization and physical penetration are combined to maximize its penetration.
Also it has good effects on scalp therapy or edema induced thermal energy and
hyperpigmentation because it is based on cryo therapy not thermal energy.
Ionized vitamin C is penetrated through (-) current because its property is marked cathode.
CRYO-DERM
13
4. Principle & Effects of Cryoelectrophoresis
Cryo-electrophoresis Cryo-electrophoresis is way to penetrate Ionized fluid into skin by osmotic pressure happened
by electric stimulation. The Electrophoresis which was found in 1808 is an electrokinetic
phenomenon that ionized molecule within an electrolyte is moved by another electrode.
Ion within electrolyte(water-soluble substance) flows one or both ways depending on ion’s
electric charge. Ionized water-soluble solvent is absorbed surface of skin tissues effectively basing
on principle that same electric charges are pushed simultaneously and on the contrary, different
electric charges are pulled.
Ionized solvent which is electrically pushed by ion is absorbed by capillary circulation and
permeation of cell membrane. It is the principle to nourish skin using magnetic property effect.
Iontophoresis is technique using a small electric charge to effectively deliver a medicine, water-
soluble gel or ampoule through the skin. Adding a cooling system, it brings primary effects of
skin protection and soothing and prevents to absorb medicines into blood vessel capillary
contraction.
※ Osmotic Pressure Phenomenon
In Human body, the cell membrane features selectively permeable because osmosis occurs
when there is a partially permeable membrane. The osmotic pressure is defined to be the
pressure required to maintain an equilibrium with no net movement of solvent. It is a colligative
property meaning that the osmotic pressure depends on the molar concentration of the solute
but not on its identity.
Effects of Poles
Cathode Effects of Between Poles Anode
- Alkaline Solution Penetration
- Skin Activation
- Enlargement of Sweat Glands
- Relaxation of Skin Tissues
- Refining Pores
- Improvement of Blood
Circulation
- Stimulation of Nervous system
- Acceleration of Lymph
and Blood Circulation
- Acceleration of
Metabolism
- Increase of Temperature
- Acid Solution Penetration
- Skin Soothing
- Contraction of Sweat Glands
- Strengthening Skin Tissues
- Relief of inflammation
- Reduction of Blood
Circulation
-Relaxation of Nerve
Alkaline Reaction Acid Reaction
CRYO-DERM
14
5. Application program
1. Post Peeling Treatment to soothe skin
Sequence 1.
Cleansing
2.
Soothing
3. Ampoule
Penetration
5. Soothing 4. Pack 5. Finish
Applicatio
n
1 CH 2 CH
Soft ion
1 CH
Temp. Cold (0) Cold (0)
Polarity (+) ion
Time 5min. 5min. 5min. 5min. 15min. 5min.
2. Skin Whitening Care
Sequence 1.
Cleansing
2.
Circulation
3. Deep
Cleansing
4. Ampoule
Penetration
5. Massage 6. Pack 7. Finish
Application 1 CH
Soft ion
2 CH
Hard ion
1 CH
Rejuvenation
Temp. Hot (40) Cold (-5)
Polarity (-) ion (-) ion
Time 5min. 5min. 5min. 5min. 10min. 15min. 5min.
3. Acne Skin Care
Sequence 1.
Cleansing
2.
Circulation
3. Deep
Cleansing
4. Ampoule
Penetration
5. Massage 6. Pack 7. Finish
Application 1 CH
Soft ion
2 CH
Soft ion
1 CH
Ion MSG
Temp. Hot (40) Cold (-5)
Polarity (-) ion (+) ion
Time 5min. 5min. 5min. 5min. 10min. 15min. 5min.
CRYO-DERM
15
5. Application program
4. Rejuvenation Treatment for aging skin
Sequence 1.
Cleansin
g
2.
Circulatio
n
3. Deep
Cleansin
g
4. Ampoule
Penetration
5.
Massag
e
6. Pack 7.
Soothing
8.
Finish
Applicatio
n
1 CH
Soft ion
2 CH
Hard ion
1 CH
Rejuven
ation
Cold
(-5)
Temp. Hot (40) Hot
(42)
Polarity (-) ion (-) ion
Time 5min. 5min. 5min. 10 min. 15
min.
5min. 5min.
5. Wrinkle and Skin Elasticity Care
Sequence 1.
Cleansin
g
2.
Circulation
3. Deep
Cleansin
g
4.
Ampoule
Penetratio
n
5.
Massag
e
6. Pack 7.
Soothing
8.
Finish
Applicatio
n
1 CH
Soft ion
2 CH
Hard ion
1 CH
Ion Lift
Cold
(-5)
Temp. Hot (40) Hot
(42)
Polarity (-) ion (+) ion (-) ion
Time 5 min. 5 min. 5 min. 5 min. 10 min. 15 min. 5min. 5
min.
CRYO-DERM
16
6. Treatment Method
Treatment Method
Facial Treatment (Cryo/Thermo Electrode )
MODE ION SOFT
ION HARD
ION LIFT
ION MSG
REJUVENATION
LEVEL 25%
TIME 10~15min
TEMP COLD -10 ~ +10
HOT +35 ~ +45
Facial Treatment (Injection Electrode)
MODE ION SOFT
ION HARD
ION LIFT
ION MSG
REJUVENATION
LEVEL 25%
TIME 10~15min
FLOW
SPEED
LOW, MIDDUM, HIGH
CRYO-DERM
17
6. Treatment Method
Facial Treatment
1. Rub down sternocleidomastoid around
neck and finish at armpit.
2. Rub up along chin and finish at terminus.
3. Rub up drawing a circle along chin
4. Draw a circle on mouth, eyes area
separately.
5. Draw a circle on nose and forehead.
6. Rub from decollete to the whole of face
and finish by drainage.
CRYO-DERM
18
6. Treatment Method
Abdominal Treatment (Cryo/Thermo Electrode)
TEMP COLD -10 ~ +10
HOT +35 ~ +45
1. Draw a circle in a
clockwise direction.
2. Massage on abdomen
drawing diamond finish at
inguinal region.
3. Rub both sides toward the
navel and finish at the
inguinal region.
4. Rub up from side of
abdomen to the navel.
5. Drainage entirely at
inguinal region.
6. Draw a circle in a
clockwise direction.
CRYO-DERM
19
6. Treatment Methods
Legs Treatment (Cryo/Thermo Electrode)
TEMP COLD -10 ~ +10
HOT +35 ~ +45
1. Rub up gastrocnemius of
calf and thigh entirely.
2. Massage up in zigzag and
drainage toward lymph
area. .
3. Draw a circle and rub
up toward lymph area.
CRYO-DERM
20
7. Specification
① Dimension: 380 X 490 X 130mm
② Power: DC 12V 6A
③ Weight: 21Kg
④ Output Frequency or Current
- ION HARD 3.8KHz, MAX 35mA
- ION SOFT 3.8KHz, MAX 28mA
- IONLIFT 250Hz, MAX 22mA
- LIFTMSG 200Hz, MAX 25mA
- REJUVENATION 125Hz MAX 4mA
⑤ LORD RESISTANCE: 500Ω
⑥ Range of Temperature
- COOL : 10 ~ -10 1
- HOT: 35 ~ 45 1
⑦ Flow Control: HIGH, MIDDLE, LOW
⑧ Length of Treatment: 5min. ~ 60min.
⑨ Consumption Power
- Stand-by: 0.45A 5.4W
- Poccessing: 2.9A 35W (MAX 3.6A 43W)
⑩ AC Adapter
- Input: AC 100-240V, 1.8A, 50-60Hz
- Output: DC 12V, 6A
⑪ Environment Condition of Application/Storage
- Processing Temperature : 5 ~ 35
- Processing Humidity : RH 60% 이하
- Storage Temperature : 0 ~ 60
- Storage Humidity : RH 80% 이하
⑫ Protective device
- Preventive Circuit for over current (Over current)
- Preventive Circuit for over heat (Over heat)
- Zero start
⋇ Do not use this device for purpose of medical treatment because of it’s not a medical
equipment. *
CRYO-DERM
21
8. Warranty Information
9. Warranty Information
Cosmo C&T Limited Warranty
What the warranty covers:
Cosmo C&T warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the
warranty period, Cosmo C&T will, at its sole option, repair or replace the product with a similar
product. Replacement Product or parts may include remanufactured or refurbished parts or
components. The replacement unit will be covered by the balance of the time remaining on the
customer’s original limited warranty. Cosmo C&T provides no warranty for the product installed by
the customer. Cosmo C&T will report whether we will compensate or not in ten (10) days after
you require and the settlement will be reached within twenty one (21) days after you require.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied with
the product.
B. Repair or attempted repair by anyone not authorized by Cosmo C&T.
C. Damage to or loss of any programs, data or removable storage media.
D. Any damage of the product due to shipment.
E. Removal or installation of the product.
F. Causes external to the product, such as electric power fluctuations or failure.
G. Use of supplies or parts not meeting Cosmo C&T's specifications.
H. Any other cause which does not relate to a product defect.
I. Damage to, or abuse of, the coating on the surface of the display.
3. Removal, installation, and set-up service charges.
CRYO-DERM
22
8. Warranty Information
How long the warranty is effective:
Cryo_Derm products are warranted for one (1) year for parts and labor.
Types of damages
Warrants
Within the
warranty period
After the
warranty period
When the machine is in need of repair because of
capability trouble or functional defect with normal
operating within ten (10) days after purchase.
Replacement Or
Repair- free of
charge
When the machine is in need of repair because of
capability trouble or functional defect with normal
operating within one (1) month after purchase.
Replacement Or
Repair- free of
charge
Repair -
Possible
3 times break down with the same
problem
Repair- free of
charge
Repair -
compensation
4 times break down with the same
problem
Replacement Repair -
compensation
Repair -
Impossible
Impossible repair with the situation we
have parts for repair (within the term
of the parts holding)
Replacement Replacement
with depreciation
plus 10% of
depreciation
Impossible repair with the situation we
do not have parts for repair (within
the term of the parts holding)
Replacement Replacement
with depreciation
CRYO-DERM
23
8. Warranty Information
How to get service:
1. For information on obtaining warranty service, call Cosmo C&T's Customer Support
telephone number is: +82-2-338-3789. (Sunny Hwang : [email protected])
2. To obtain warranty service, please contact Cosmo C&T Customer Support. You will be
required to provide
A. A copy of the dated sales slip.
B. Your name.
C. Your address.
D. The serial number of the product.
E. A description of the problem.
3. Bring or ship the product prepaid in the original container, with the associated accessories,
to Cosmo C&T service center.
NOTE: Cosmo C&T is not responsible for any returned product without notice in advance.
Exclusion of damages:
COSMO C&T’S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. COSMO C&T SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
