CSC444F'05Lecture 51 The Stochastic Capacity Constraint.

CSC444F'05 Lecture 5 1

The Stochastic Capacity Constraint


MIDTERM

NEW DATE AND TIME AND PLACE

Tuesday, November 1

8pm to 9pm

Woodsworth College

WW111


Estimates

• Estimates are never 100% certain• E.g, if we estimate a feature at 20 ECD’s

– Not saying will be done in 20 ECDs

– But then what are we saying?• Are we confident in it?• Is it optimistic?• Is it pessimistic?

• A quantity whose value depends upon unknowns (or upon random chance) is called a stochastic variable

• Release planning contains many such stochastic variables.


Confidence Intervals

• Say we toss a fair coin 5000 times– We expect it to come up heads ½ the time – 2500 times or so

– Exactly 2500?• Chance is only 1.1%

– ≤ 2500?• Chance is 50%• If we repeat this experiment over and over again (tossing a coin 5000 times),

on average ½ the time it will be more, ½ the time less.

– ≤ 2530?• Chance is 80%

– ≤ 2550?• Chance is 92%

• These (50%, 80%, 92%) are called confidence intervals– With 80% confidence we can say that the number of heads will be less

than 2530.


Stochastic Variables

• Consider the work factor of a coder, w.– When estimating in advance, w is a stochastic variable.

– Stochastic variables are described by statistical distributions

– A statistical distribution will tell you:• For any range of w• The probability of w being within that range

– Can be described completely with a probability density function.• X-axis: all possible values of the stochastic variable• Y-axis: numbers >= 0• The probability that the stochastic variables lies between two values a and b

is given by the area under the p.d.f. between a and b.


PDF for w

• Probability that 0.5 < w < 0.7 = 66%• Looks to be fairly accurate.

– Has a finite probability of being 0– Has not much chance of being much greater than 1.2 or so

• Drawing such a curve is the only real way of describing a stochastic variable mathematically.

0 0.6 1 2 3

0.5 0.7

area = 0.66

3

2

1

Probability density function for wi.


Parameterized Distributions

• “So, Bill, here’s a piece of paper, could you please draw me a p.d.f. for your work factor?” – Nobody knows the distribution to this level of accuracy

– Very hard to work with mathematically

• Usual method is to make an assumption about the overall shape of the curve, choosing from a few set shapes that are easy to work with mathematically.

• Then ask Bill for a few parameters that we can use to fit the curve.

• Because we are not so sure on our estimates anyways, the relative inaccuracy of choosing from one of a set of mathematically tractable p.d.f.’s is small compared to the other estimation errors.


e.g., a Normal for w

• Assume work factors are adequately described by a bell-shaped Normal distribution.

• 2 points are required to fit a Normal• E.g., average case and some reasonable “worst case”.

– Average case: half the time less, half the time more = 0.6

– “Worst” case: 95% of the time w won’t be that bad (small) = 0.4• Normal curves that fits is N(0.6,0.12).

0.6

= 0.6

= 0.12

0.4

area = 0.95

N(0.6,0.12)

area = 68%


Maybe not Normal

• Normals are easiest to work with mathematically.• May not be the best thing to use for w

– Normal is symmetric about the mean• E.g., N(0.6,0.12) predicts a 5% “best case” of 0.8.• What if Bill tells us the 5% best case is really 1.0?

– Then can’t use a Normal

– Would need a skewed (tilted) distribution with unsymmetrical 5% and 95% cases.

– Normal extends to infinity in both directions• Finite probability of w < 0 or w > 10

0.6

= 0.6

= 0.12

0.4

area = 0.95

N(0.6,0.12)


Estimates

• Most define our quantities very precisely• E.g., for a feature estimate of 1 week

– Post-Facto• What are the units?• 40 hours? Longer? Shorter? Dedicated? Disrupted? One person or two? ...• Dealt with this last lecture in great detail

– Stochastic• 1 week best case?• 1 week worst case?• 1 week average case?• Need a p.d.f

• Depending upon these concerns, my “1 week” maybe somebody else’s 4 weeks.– Very significant issue in practice


The Stochastic Capacity Constraint

• T is fixed• F and N are both stochastic quantities.• Can only speak about the chance of the goo fitting into the rectangle• Say F=400, N=10, T=40: are we good to go?

– Cannot say.

– Need precise distributions to F and N to answer, and then only at some confidence level.


Summing Distributions

• F and N are sums and products over many contributing stochastic variables.

• E.g.– F = f1 + f2– If f1 and f2 have associated statistical distributions, what is the statistical

distribution of F?

– In general, no answer.– Special case: f1 and f2 are both Normal

• Then F will be Normal as well.

• Mean of F will be the sums of the means of f1 and f2

• Standard deviation of F will be the square root of the sums of the squares of the standard deviations of f1 and f2.

– How about f1 * f2?• Figet about it! Huge formula, result is not a Normal distribution

– One needs statistical simulation software tools to do arithmetic on stochastic variables.


Law of Large Numbers

• If we sum lots and lots of stochastic variables, the sum will approach a Normal distribution.

• Therefore something like F is going to be pretty close to Normal.– E.g., 400 features summed

• N will also be, but a bit less so– E.g., 10 w’s summed


Delta Statistic

• D(T) = N T F• If we have Normal approximations for N and F, can compute the

Normal curve for D as a function of various T’s.• We can then choose a T that leads to a D we can live with.

• Interested in

Probability [ D(T) 0 ]

• The probability that all features will be finished by dcut.

• In choosing T will want to choose a confidence interval the company can live with, e.g., 80%.

• Then will pick a T such that D(T) 0 80% of the time.


Example Picking T

• F is Normal with mean 400 and 90% worst case 500• N is Normal with mean 10 and 90% worst case 8• Cells are D(T) = N T F at the indicated confidence level• Note transitions through 0.

confidence level

25% 40% 50% 60% 80% 90% 95%

30 -39 -77 -100 -123 -177 -217 -250

35 14 -26 -50 -74 -130 -172 -207

40 67 25 0 -25 -84 -128 -164

T 45 121 77 50 23 -38 -85 -123

50 174 128 100 72 7 -41 -82

55 228 179 150 121 52 1 -41

60 282 231 200 169 97 44 0


Choices for T

• To be 95% certain of hitting the dates, choose T = 60 workdays• Or... If we plan to take 40 workdays, only 5% of the time will be late

by more than 20 workdays

• To be 80% sure, T = 49

• To gamble, for a 25% fighting chance, make T = 33.


Shortcut

• Ask for 80% worst case estimates for everything.• If F = NxT using the 80% worst case values, then there is an 80%

chance of making the release.• The Deterministic Release Plan is based on this approach.

• If you also ask for mean cases for everything, can then fit a Normal distribution for D(T) and can predict the approximate probability of slipping.


Initial Planning

• Start with a T• Choose a feature set• See if the plan works out• If not, adjust T and/or the feature set an continue

choose T happy?

yes

no

done

adjust T

choose feature set

adjust feature set


Adjusting the Release Plan

• Count on the w estimated to be too high and feature estimates to be too low.

• Re-adjust as new data comes in.• Can “pad the plan” by choosing a 95% T.

– Will make it with a high degree of confidence

– May run out of work

– May gold plate features

• Better to have an A-list and a B-list– Choose one T such that, e.g.,

• Have 95% confidence of making the A list• Have 40% confidence of making the A+B list.


Appreciating Uncertainty

• Successful Gamblers and Traders– Really understand probabilities

• Both will tell you the trick is to know when to take your losses

• In release planning, the equivalent is knowing when to go to the boss and say– We need to move out the date

– Or we need to drop features from the plan


Risk Tolerance

• Say a plan is at 60%

• Developer may say:– Chances are poor: 60% at best

• An entrepreneurial CEO will say– Looking great! At least a 60% chance of making it.

• Should have an explicit discussion of risk tolerance


Loading the Dice

• Can manage to affect the outcome.• Like a football game:

– Odds may be 3-to-1 against a team winning

– But by making a special effort, the team may still win

• In release planning– Base the odds on history

– But as a manager, don’t ever accept that history is as good as you can do!

• E.g., introduce a new practice that will boost productivity– Estimate will increase productivity by 20%

– Don’t plan for that!

– Plan for what was achieved historically.

– Manage to get that 20% and change history for next time around.


Example Stochastic Release Plan

• Sample Stochastic Release Plan

Date post:	12-Jan-2016
Category:	Documents
Upload:	amos-thornton
View:	218 times
Download:	0 times

CSC444F'05Lecture 51 The Stochastic Capacity Constraint.

Documents