CSQ APPRENTICE ADVANCE PLUS - SHORT COURSES PROGRAM
HOW DOES IT WORK?CSQ funding is paid directly to TAFE Queensland. Some courses are part of full qualifications. If you are interested in a course, contact us to find out more.
WHAT’S ON OFFER?Eligible participants can access a range of fully funded accredited and non-accredited short courses.
ACCREDITED SHORT COURSESAn accredited short course or skill set will earn you official credits for the units you complete. These unit credits may be applied to a related qualification if you choose to study a full certificate or diploma at a later date.
When you successfully complete your accredited unit/s you will earn a Statement of Attainment.
NON-ACCREDITED SHORT COURSESNon-accredited short courses are a great way to refresh your knowledge and increase your skills. Upon completion of a non-accredited short course a Certificate of Attendance can be provided.
ELIGIBILITYTo be eligible for funding, participants must permanently reside or be employed in Queensland, they must also be one of the following:
> An Australian or New Zealand citizen> A permanent resident of Australia> A holder of a refugee or humanitarian visa
Who is either:
> A current active apprentice or trainee in Queensland undertaking a CSQ recognised qualification.
> An existing worker or unemployed eligible worker in the first year out of their recognised apprenticeship or traineeship.
> An apprentice or trainee who has had their recognised apprenticeship or traineeship cancelled and are accessing Queensland Government funding to complete training.
Additional eligibility requirements may apply. Please speak with your TAFE Queensland representative.
The Apprentice Advance Plus - Short Courses Program is an initiative of Construction Skills Queensland (CSQ). Eligibility criteria applies to all CSQ funded programs. For more information visit CSQ.org.au
As a recipient of funding, TAFE Queensland is proud to support Construction Skills Queensland (CSQ) and their ongoing financial and professional contribution to the Queensland building and construction industry.
The CSQ Apprentice Advance Plus – Short Courses Program assists current or recently completed apprentices or trainees in the civil construction and building and construction industries to increase their skills and knowledge with fully funded short courses.
PLACES ARE LIMITED. APPLY NOW
1800 654 447 | tafeqld.edu.au
RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019
GENERAL CONSTRUCTION PROGRAM 19/20
AGAT Asbestos general awareness training (non-accredited)
BSBSMB401 Establish legal and risk management requirements of small business
CMBPDRV001 Revalidation course commission and maintain backflow prevention devices (non-accredited)
CPCCCM2010 Work safely on scaffolding higher than two metres
CPCCCM2010B Work safely at heights
CPCCDE3014A Remove non-friable asbestos
CPCCLDG3001A Licence to perform dogging
CPCCPD3031A Implement safe lead paint and asbestos work practices in the painting industry
WHITE CARD CPCCWHS1001 Prepare to work safely in the construction industry
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
CPCPCM4012A Estimate and cost work
CPCPDR4011B Design and size sanitary drainage systems
CPCPDR4012B Design and size stormwater drainage systems
CPCPFS4021A Commission domestic and residential fire suppression sprinkler systems
CPCPFS4024A Design residential and domestic fire sprinkler systems
CPCPGS4011C Design and size consumer gas installations
CPCPGS4022A Service Type A gas appliances
CPCPWT4011B Design and size heated and cold water services and systems
CPCPWT4022A Commission and maintain backflow prevention devices
CPCPWT4023A Commission and maintain hot and heated water temperature control devices
HLTAID003 Provide first aid
ICTCBL301 Install, terminate and certify structured cabling installation
ICTCBL302 Install and terminate optical fibre cable on customer premises
PMBWELD301 Butt weld polyethylene plastic pipelines
PMBWELD302 Electrofusion weld polyethylene pipelines
TLILIC0003 Licence to operate a forklift truck
UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEG122A Conduct compliance inspection of single phase LV electrical installations
UEENEEG123A Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase
UEENEEG175A Develop compliance policies and plans to conduct an electrical contracting business
UEENEEG197A Apply currency of safe working practices and compliance verification of electrical installations
UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems
UEENEEK135A Design grid connected photovoltaic power supply systems
SUBSIDISED COURSES UNDER THE APPRENTICE ADVANCE PLUS - SHORT COURSES PROGRAM
PLACES ARE LIMITED. APPLY NOW
1800 654 447 | tafeqld.edu.au
RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019
*A maximum of three plant operation courses can be subsidised.
UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems
UEENEEP010A Disconnect - reconnect appliances connected to low voltage installation wiring
UEENEEP013A Disconnect - reconnect control devices connected to low voltage installation wiring
UEENEEP014A Disconnect - reconnect water heaters connected to low voltage installation wiring
UEENEEP016A Locate and rectify faults in low voltage appliances using set procedures
UEENEEP018A Locate and rectify faults in low voltage control devices using set procedures
UEENEEP019A Locate and rectify faults in low voltage water heaters using set procedures
UEENEEP024A Attach cords and plugs to electrical equipment for connection to single phase 230 Volt supply
UEENEEP025A Attach cords and cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply
UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
UEERE4001 Install, maintain and fault find battery storage systems for grid-connected photovoltaic systems
UEERE5001 Design battery storage systems for grid-connected photovoltaic systems
UETTDRRF06B Perform rescue from a live LV panel
WHSQHSRNCB01 Health and Safety Representative (HSR) - WHSQ approved training course - Initial (5 days) (non-accredited)
CIVIL CONSTRUCTION PROGRAM 19/20
RIIHAN301E Operate elevating work platform
RIIHAN309F Conduct telescopic materials handler operations
RIIMPO317F* Conduct roller operations
RIIMPO318F* Conduct civil construction skid steer loader operations
RIIMPO319E* Conduct backhoe/loader operations
RIIMPO320F* Conduct civil construction excavator operations
RIIMPO321F* Conduct civil construction wheeled front end loader operations
RIIMPO323E* Conduct civil construction dozer operations
RIIMPO324F* Conduct civil construction grader operations
RIIRIS301D Apply risk management processes
RIIWHS202D Enter and work in confined spaces
RIIWHS204D Work safely at heights
RIICSCCSQ1 Short course Civil – CSQ Skill Set 1
SUBSIDISED COURSES UNDER THE APPRENTICE ADVANCE PLUS - SHORT COURSES PROGRAM
PLACES ARE LIMITED. APPLY NOW
1800 654 447 | tafeqld.edu.au
RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019
APPRENTICESHIP (A) OR TRAINEESHIP (T)
AHC30916 Certificate Ill in Landscape Construction A
CPC30111 Certificate Ill in Bricklaying/Blocklaying A
CPC30116 Certificate Ill in Shopfitting A
CPC30211 Certificate Ill in Carpentry A
CPC30318 Certificate Ill in Concreting T
CPC30511 Certificate Ill in Dogging T
CPC30611 Certificate Ill in Painting and Decorating A
CPC30711 Certificate Ill in Rigging T
CPC30812 Certificate Ill in Roof Tiling A
CPC30911 Certificate Ill in Scaffolding T
CPC31011 Certificate Ill in Solid Plastering A
CPC31111 Certificate III in Steelfixing T
CPC31211 Certificate Ill in Wall and Ceiling Lining A
CPC31311 Certificate Ill in Wall and Floor Tiling A
CPC31411 Certificate Ill in Construction Waterproofing A
CPC31912 Certificate Ill in Joinery A
CPC32313 Certificate Ill in Stonemasonry (Monumental/Installation) A
CPC32413 Certificate Ill in Plumbing A
CPC32513 Certificate Ill in Plumbing (Mechanical Services) A
CPC32612 Certificate Ill in Roof Plumbing A
CPC32713 Certificate Ill in Gas Fitting A
CPC32813 Certificate Ill in Fire Protection A
MSF30418 Certificate Ill in Glass and Glazing A
MSF30818 Certificate III in Flooring Technology A
MSF31113 Certificate Ill in Cabinet Making A
RLL30815 Certificate Ill in Civil Construction Plant Operations A
RLL30915 Certificate III in Civil Construction T
RLL31215 Certificate Ill in Civil Foundations T
RLL31615 Certificate Ill in Trenchless Technology T
UEE30811 Certificate Ill in Electrotechnology Electrician A
UEE31011 Certificate Ill in Fire Protection Control A
UEE32211 Certificate Ill in Air-conditioning and Refrigeration A
RECOGNISED APPRENTICESHIPS AND TRAINEESHIPS THAT MAY BE ELIGIBLE TO RECEIVE FUNDING
PLACES ARE LIMITED. APPLY NOW
1800 654 447 | tafeqld.edu.au
RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019