Charging stationfor EV charging
CSR100
A modern, safe and user-friendlycharging station for electric vehicles
The charging station can be supplied with dual Type 2 sock-ets, or fixed charging cables (Type 1 or Type 2). The unit features a robust metal enclosure and can be mounted on a 60mm pole or on a wall as option. CSR100 can be used with or without an internet connection and it features local load monitoring between the outlets as standard.
FeaturesCSR100 has a clear status indicator at the centre of the unit. The colour of the LED illumination changes by outlet (side) depend-ing on status. The colour of the LED is blue when charging, green when a socket is available and red in the event of a fault. The charging station is fitted with a fuse as well as an RCD for maximum protection. The RFID option enables user authentica-tion. The RFID reader in the charging stations works with most RFID standards, enabling easy integratIon with any existing RFID based management system. The web portal registers charging sessions with information on who charged the vehicle, at what time and the energy use in kWh. The maximum current flowing through each socket can be limited to a pre-set value to avoid overload in the electrical installation.
InstallationThe installation of the CSR100 is simple and must be carried out by a qualified electrician. The unit can be used immediately after installation, without internet access. To connect to Charge Portal configuration is required. Programming or updating the CSR100 can be carried out via USB cable or remotely to connected units.
CSR100 is our most powerful charging station, available from 16A single-phase to 32A three-phase per socket or charge point (3.7kW to 22kW). All safety features, such as fuse and RCD, are built into the unit. We use an RCD type B or type A + DC leakage detector.
FeaturesAND benefits
Robust enclosure made from paint coated stainless steel
Output: 1.4 kW to 22 kW (single-phase 6A up to three-phase 32A)
Smart EV charging (Mode 3)
Built-in fuse and RCD (Type B or Type A
+ DC leakage detector)
Dual Type 2 outlets or fixed charging cables (Type 1 or Type 2)
Compatible with Chargestorm’s CGC for load monitor
Connectivity to web portal
Pole mounting onto 60 mm steel tube as standard or wall mounting as option
Local load balancing between outlets
RFID as option to limit charging
MID approved energy meter (for billing)
Chargestorm
201806
CSR100 can deliver up to 22kW (3-phase, 400V, 32A) AC charging on dual outlets. CSR100 charging stations support mode 3 charging and is designed for real estate and public outdoor applications.
NETWORK ACCESSThe CSR100 can be linked to our Charge portal. From this service the user can see charging station configura-tion, software updates, charge statistics, authentication, etc. Internet access uses 3G/GPRS or via the internal Ethernet interface.
NANOGRID™ TECHNOLOGY/POWER MONITORNanoGrid™ is a technology that ensures that vehicle charging works without overload in the local power grid, a local power monitor.
SMART CARD READERThe integrated RFID reader supports ISO14443-A/ MIFARE. RFID is used for user identification, generate charge statistics/substrates, and to prevent unauthorized charging.
CHARGING SOFTWAREThe software supports OCPP v1.5/v1.6 for connection to Charge portal.
ENERGY METERThe CSR100 has dual MID-approved electricity meters
Charging stationfor EV charging
Chargestorm
Technical specifications
CE-markingIEC 61851-1 (mode 3), IEC 62196-2, IEC61439-1
COmpATIBIlITy
Enclosure: Height 480mm, Depth 225mm (wall mounting)290mm (pole mounting), Width 445 mmWeight: 14-18 kg, depending on configurationTube diameter for pole mounting: 60mm
DImEnSIOnS
Charging capacity: 6-32A, 230/400V, 1.4kW - 22kWSafety: Fuse and RCD. Type B or Type A + DC leakage detector
ElECTRICAl
Protected to Ip44, Type 2connectors, Ip44 lidTemperature: -30°C to +55°CRel. humidity: 5 to 95%
EnVIROnmEnTAl COnDITIOnS
Enclosure: Stainless steelMode 3 charging controlType 2 access control
SpECIFICATIOn COmpATIBIlITy
2 x 12V pWm sockets2 x RS485 series ports1 x Ethernet, data port2 x USB port (1 host, 1 device)6 x current transformer inputs (Analog)
InTERnAl InTERFACE
ORDER INFORMATION
CSR100 with 2x Type 2 sockets, three-phase 32A, MID -approved energy meter, fuse, RCD Type B, Ethernet
Article: 810-00062
CSR100 with 2x Type 2 coiled cable, three-phase 32A, MID -approved energy meter, fuse, RCD Type B, Ethernet
Article: 810-00064
CSR100 with 2x Type 2-sockets, single-phase 16A, MID -approved energy meter, fuse, RCD Type A, Ethernet
Article: 810-00065
CSR100 with 2x Type 2 coiled cable, single-phase 16A, MID -approved energy meter, fuse, RCD Type A, Ethernet
Article: 810-00101
Other variants are available.Please contact Chargestorm for more information.
820-00077820-00046
820-00045
820-00036810-00012
RFID authentication (for two outlets)Remote control of personal safetyfrom external reset buttonConcrete base with 60mm tube forpole mounting3G/GPRS modemMounting kit for wall mounting
Options
201806