CTR-01C O N T R O L L E R

PROPERTIES

• Relay output for control of non-dimmable load.• 0-10 V / 1-10 V for control of third party products.• Compatible with the Rotary Adapter RTR-01.• Configuration and control from the Plejd app (Bluetooth®).• Controllable from other Plejd products.• Zero cross switching.• Time settings include astronomical clock, weekly clock

and scheduling.• Scenarios from mobile or switch/double click.• Fits behind push button in standard electrical box.• Max load (relay with 16A breaking power at cosΦ = 1).

MAINS ELECTRICITY230 VAC / 50 Hz

STANDBY POWER0,3 W

OPERATING TEMPE-RATURE OUTSIDE ELECTRICAL BOX-20 till +35 °CNon-condensing humidity

RADIO2,4 GHz meshBluetooth®

RADIO RANGE*Approx. 10 m indoors* Plejd mesh technology extends the range by communication between the units.

PROTECTIONOvertemperatureMax bus power: 40mA

MANUFACTURERPlejd AB

COUNTRY OF ORIGINSweden

IN COMPLIANCE WITH STANDARDS:

LVD/ELECTRICAL SAFETYEN 60669-2-1

EMCEN 60669-2-1EN 301 489

RADIOEN 300 328

ERP/ECODESIGNEC 1275/2008

INSTALLATIONThe controller is installed in the electrical box behind the push button/box cover or by using brackets (not included, MNT-01/BAT-01) on the wall or DIN rail. When installed in isolated or warm environments or with multiple relays in the same enclosure, the overall output is reduced.

ACCESSORIES

*Requires motion sensor with a neutral conductor (starts at 0 W).

CTR-01

Plejd ABwww.plejd.com

Relay/actuator that fits in an electrical box for switching lighting loads primarily. Also used for controlling third-party products with inputs of 0-10 V or 1-10 V, such as LED drivers and HF ballasts. Two inputs for control via self-return push buttons, motion detector* or Rotary Adapter RTR-01. Additionally, the product can be controlled and configured via Bluetooth® on a mobile phone or tablet with the Plejd app.

μ M LED

RTR-01Rotary Adapter

MNT-01Mounting Clip

M A D E I N

LOAD PFRATED

OUTPUT VA A

Halogen(230V) 1 3 500 W 3 500 16

LED loads 0,9 800 W 1 000 4

Fluorescent tube uncompensated 0,3 700 W 2 300 10

Fluorescent tube compensated 0,85 1 500 W 1 750 8

Low voltage halogen electronic 0,8 1 500 W 1 750 8

Low voltage halogen conventional 0,95 1 200 W 1 200 5

Low-energy bulbs 0,6 500 W 800 4

0081

.1.1

46 mm

46 mm

18 mm

46 mm

46 mm

18 mm

R,C LED

N 1 2

LN

Coupling for non-dimmable load

(only switching off load to power supply)

N 1 2

LN

0-10V bus

Coupling for 0–10V bus (without switching

off load to power supply)

N 1 2

LN

1-10V bus

Coupling for 1–10V bus (with switching off load to power supply)

LLoadN

L L L LL LN 1 2

LN

Coupling for non-dimmable load

(only switching off load to power supply)

N 1 2

LN

0-10V bus

Coupling for 0–10V bus (without switching

off load to power supply)

N 1 2

LN

1-10V bus

Coupling for 1–10V bus (with switching off load to power supply)

LLoadN

L L L LL LN 1 2

LN

Coupling for non-dimmable load

(only switching off load to power supply)

N 1 2

LN

0-10V bus

Coupling for 0–10V bus (without switching

off load to power supply)

N 1 2

LN

1-10V bus

Coupling for 1–10V bus (with switching off load to power supply)

LLoadN

L L L LL L