Date post: | 27-Jun-2015 |
Category: |
Technology |
Upload: | mario-gazziro |
View: | 337 times |
Download: | 1 times |
CUDA Development using
PyCUDAPart 2
Prof. Mario A. Gazziro (Yah!)Organization: Prof. André
Carvalho
July 2012Support:
Igor, Heitor, Pedro, Ruan and Andre
Part VI: Classroom Exercises – Plot FID
Part VI: Classroom Exercises – Plot FID
Part VI: Classroom Exercises – Plot FID and FFT
Part VI: Classroom Exercises – Plot FID and FFT
Part VI: Classroom Exercises – Plot 7x2 FFT’s matrix
Part VI: – Plot SAWTOOTH from plots.h5
Inspect plots.h5 with HDFVIEW
Hint: interleave points with the sintax
plot=plot[::-K]
Part VI: – Normalize SAWTOOTH from plots.h5
Re-scale vertical axis from 0 to 1
signal / max(abs(signal))
Part VI: – Plot SIN from plots.h5
Inspect plots.h5 with HDFVIEW
Hint: interleave points using
plot=plot[::K]
Part VII – Sync Threads Sample